We've been fighting the battle of trying to create a regex generator and
parser that can handle arbitrary hostname schemes - without long-term
success. The worst of it is that there is no way of checking to see if
the computed regex is correct short of parsing it and doing a
character-by-character comparison with the original string. Ugh...there
has to be a better solution.
One option is to investigate using 3rd-party regex libraries as
those are coming from communities whose sole focus is resolving that
problem. However, someone would need to spend the time to investigate
it, and we'd have to find a license-friendly implementation.
Another option is to quit beating our heads against the wall and just
compress the information. It won't be as much of a reduction, but we
also won't keep hitting scenarios where things break. In this case, it
seems that "perfection" is definitely the enemy of "good enough".
This PR implements the compression option while retaining the
possibility of people adding regex-generating components. The
compression code used in ORTE is consolidated into the opal/compress
framework. That framework currently held bzip and gzip components for
use in compressing checkpoint files - since we no longer support C/R, I
have .opal_ignore'd those components.
However, I have left the original framework APIs alone in case someone
ever decides to redo C/R. The APIs of interest here are added to the
framework - specifically, the "compress_block" and "decompress_block"
functions. I then moved the ORTE zlib compression code into a new
component in this framework.
Unfortunately, the framework currently is a single-select one - i.e.,
only one active component at a time. Since I .opal_ignore'd the other
two and made the priority of zlib high, this isn't a problem. However,
if someone wants to re-enable bzip/gzip or add another component, they
might need to transition opal/compress to a multi-select framework.
Included changes:
* Consolidate the compression code into the opal/compress framework
* Move the ORTE zlib compression code into a new opal/compress/zlib
component
* Ignore the bzip and gzip components in opal/compress framework
* Add a "compress_base_limit" MCA param to set the threshold above which
we compress data - defaults to 4096 bytes
* Delete stale brucks and rcd components from orte/grpcomm framework
* Delete the orte/regx framework
* Update the launch system to use opal/compress instead of string regex
* Provide a default module if no zlib is available
* Fix some misc multi-node issues
* Properly generate the nidmap in response to a "connection warmup"
message so the remote daemon knows the children it needs to launch.
* Remove stale references to orte_node_regex
* opal_byte_object_t's are not OPAL objects - properly release allocated
memory.
* Set the topology
* Currently only handling homogeneous case
* Update the compress framework files to conform
* Consolidate open/close into one "frame" file. Ensure we open/close the
framework
Signed-off-by: Ralph Castain <rhc@pmix.org>
When there is no alias for a given node, do not set the
ORTE_NODE_ALIAS attribute to an empty string any more.
Thanks Erico for reporting this issue.
Thanks Ralph for the guidance.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
Handle the need for different regex generator/parsers by moving the
orte/util/nidmap and orte/util/regex code into a new "regx" framework.
Use the original code to complete a "fwd" component, and create a
scaffold for IBM's "reverse" component.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
passed to make it all flow thru the opal/pmix "put/get" operations. Update the PMIx code to latest master to pickup some required behaviors.
Remove the no-longer-required get_contact_info and set_contact_info from the RML layer.
Add an MCA param to allow the ofi/rml component to route messages if desired. This is mainly for experimentation at this point as we aren't sure if routing wi
ll be beneficial at large scales. Leave it "off" by default.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Remove the opal_ignore from the RML/OFI component, but disable that component unless the user specifically requests it via the "rml_ofi_desired=1" MCA param. This will let us test compile in various environments without interfering with operations while we continue to debug
Fix an error when computing the number of infos during server init
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
onto the backend daemons. By default, let mpirun only pack the app_context
info and send that to the backend daemons where the mapping will
be done. This significantly reduces the computational time on mpirun as it isn't
running up/down the topology tree computing thousands of binding
locations, and it reduces the launch message to a very small number of
bytes.
When running -novm, fall back to the old way of doing things
where mpirun computes the entire map and binding, and then sends
the full info to the backend daemon.
Add a new cmd line option/mca param --fwd-mpirun-port that allows
mpirun to dynamically select a port, but then passes that back to
all the other daemons so they will use that port as a static port
for their own wireup. In this mode, we no longer "phone home" directly
to mpirun, but instead use the static port to wireup at daemon
start. We then use the routing tree to rollup the initial
launch report, and limit the number of open sockets on mpirun's node.
Update ras simulator to track the new nidmap code
Cleanup some bugs in the nidmap regex code, and enhance the error message for not enough slots to include the host on which the problem is found.
Update gadget platform file
Initialize the range count when starting a new range
Fix the no-np case in managed allocation
Ensure DVM node usage gets cleaned up after each job
Update scaling.pl script to use --fwd-mpirun-port. Pre-connect the daemon to its parent during launch while we are otherwise waiting for the daemon's children to send their "phone home" rollup messages
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
direct. Don't resend wireup info if nothing has changed
Fix release of buffer
Correct the unpacking order
Fix the DVM - now minimized data transfer to it
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Cleanup a typo, and remove no longer needed MCA params for hetero nodes and hetero apps. Hetero nodes will always be automatically detected. We don't support a mix of 32 and 64 bit apps
Modify the orte_node_t to use orte_topology_t instead of hwloc_topology_t, updating all the places that use it. Ensure that we properly update topology when we see a different one on a compute node.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
* ess/hnp: add support for forwarding additional signals
This commit adds support to the hnp ess module to forward additional
signals beyond the default SIGUSR1, SIGUSR2, SIGSTP, and SIGCONT.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
* Generalize this a bit to allow a broader range of signals to be forwarded. Turns out that SIGURG is now a "standard" signal, though the value differs across systems. So setup to forward it (and some friends) if they are defined. Allow users to provide the signal name (instead of the integer value) as the value of even the more common signals does vary across systems. Don't limit the number that can be supported.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
* ess/hnp: fix some bugs in the signal forwarding code
This commit fixes two bugs:
- signals_set needs to be set even if no signals are being
forwarded. If it is not set we will SEGV in libevent if
ess_hnp_forward_signals == none.
- SIGTERM and SIGHUP are handled with a different type of handler. Do
not allow the user to specify these to be forwarded.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
* We are sure to get "dinged" if error messages aren't nicely output via show_help, so do so here
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Still not completely done as we need a better way of tracking the routed module being used down in the OOB - e.g., when a peer drops connection, we want to remove that route from all conduits that (a) use the OOB and (b) are routed, but we don't want to remove it from an OFI conduit.
Multiple conduits can exist at the same time, and can even point to the same base transport. Each conduit can have its own characteristics (e.g., flow control) based on the info keys provided to the "open_conduit" call. For ease during the transition period, the "legacy" RML interfaces remain as wrappers over the new conduit-based APIs using a default conduit opened during orte_init - this default conduit is tied to the OOB framework so that current behaviors are preserved. Once the transition has been completed, a one-time cleanup will be done to update all RML calls to the new APIs and the "legacy" interfaces will be deleted.
While we are at it: Remove oob/usock component to eliminate the TMPDIR length problem - get all working, including oob_stress
https://github.com/pmix/master/pull/71
Have OMPI's current version of pmix120 nicely fail in case of
too long sun_path (longer than 108 or in case of OSX 103 chars).
And have OMPI return proper error messages with hints how to
amend.
* qos framework is moving to the scon layer and is no longer required in ORTE
* remove the rml/ftrm component as we now have multiple active components, and so the wrapper needs to be rethought
* no need for separating the "base" from "API" module definition. The two are identical
* move the "stub" functions into their own file for cleanliness
* general cleanup to meet coding standards
* cleanup some logic in the stubs
* provide a more reliable way of determining that a process is a singleton by leveraging the schizo framework. Add new components for slurm, alps, and orte to detect when we are in a managed environment, and if we have been launched by mpirun or a native launcher. Set the correct envars to control ess and pmix selection in each case.
* change the relative priority of the pmix120 and pmix112 components to make pmix120 the default
* fix singleton comm-spawn by correctly setting the num_apps field of the orte_job_t created by the daemon - this fixes a segfault in register_nspace on newly created daemons
* ensure orterun doesn't propagate any ess or pmix directives in its environment
* Cleanup a few valgrind issues and memory leaks
* Fix a race condition that prevented the client from completing notification registrations (missing thread shift)
* Ensure the shizo/alps component detects launch by mpirun
This required modifying the mca_component_select function to actually check the return code on a component query - it was blissfully ignoring it.
Also do a little cleanup to avoid bombarding the user with multiple error messages.
Thanks to Patrick Begou for reporting the problem
Bring Slurm PMI-1 component online
Bring the s2 component online
Little cleanup - let the various PMIx modules set the process name during init, and then just raise it up to the ORTE level. Required as the different PMI environments all pass the jobid in different ways.
Bring the OMPI pubsub/pmi component online
Get comm_spawn working again
Ensure we always provide a cpuset, even if it is NULL
pmix/cray: adjust cray pmix component for pmix
Make changes so cray pmix can work within the integrated
ompi/pmix framework.
Bring singletons back online. Implement the comm_spawn operation using pmix - not tested yet
Cleanup comm_spawn - procs now starting, error in connect_accept
Complete integration
* don't pass --tree-spawn to the orted cmd line. If someone doesn't want tree-spawn, it shows up as an MCA param anyway
* ensure state/orted component disqualifies itself from CM operations
* clarify the DVM proc_type definitions
* ensure we stop littering the tmp dir with session directories
Don't filter the topology by cpuset if you are mpirun until you know that no other compute nodes are involved. This deals with the corner case where mpirun is executing on a node of different topology from the compute nodes.
Simplify - don't mandate that all cpus in the given cpuset be present on every node. We can then run everything thru the filter as before, which ensures that any procs run on mpirun are also contained within the specified cpuset.
Correctly count the number of available PUs under each object when given a cpuset
Fix the default binding settings, and correctly count PUs when no cpuset is given
Ensure the binding policy gets set in all cases
Retain the hetero-nodes flag for those cases where the user *knows* that there are differences and our automated system isn't good enough to see it.
Will obviously require further refinement as we find out which variances it can detect, and which it cannot.
WHAT: Merge the PMIx branch into the devel repo, creating a new
OPAL “lmix” framework to abstract PMI support for all RTEs.
Replace the ORTE daemon-level collectives with a new PMIx
server and update the ORTE grpcomm framework to support
server-to-server collectives
WHY: We’ve had problems dealing with variations in PMI implementations,
and need to extend the existing PMI definitions to meet exascale
requirements.
WHEN: Mon, Aug 25
WHERE: https://github.com/rhc54/ompi-svn-mirror.git
Several community members have been working on a refactoring of the current PMI support within OMPI. Although the APIs are common, Slurm and Cray implement a different range of capabilities, and package them differently. For example, Cray provides an integrated PMI-1/2 library, while Slurm separates the two and requires the user to specify the one to be used at runtime. In addition, several bugs in the Slurm implementations have caused problems requiring extra coding.
All this has led to a slew of #if’s in the PMI code and bugs when the corner-case logic for one implementation accidentally traps the other. Extending this support to other implementations would have increased this complexity to an unacceptable level.
Accordingly, we have:
* created a new OPAL “pmix” framework to abstract the PMI support, with separate components for Cray, Slurm PMI-1, and Slurm PMI-2 implementations.
* Replaced the current ORTE grpcomm daemon-based collective operation with an integrated PMIx server, and updated the grpcomm APIs to provide more flexible, multi-algorithm support for collective operations. At this time, only the xcast and allgather operations are supported.
* Replaced the current global collective id with a signature based on the names of the participating procs. The allows an unlimited number of collectives to be executed by any group of processes, subject to the requirement that only one collective can be active at a time for a unique combination of procs. Note that a proc can be involved in any number of simultaneous collectives - it is the specific combination of procs that is subject to the constraint
* removed the prior OMPI/OPAL modex code
* added new macros for executing modex send/recv to simplify use of the new APIs. The send macros allow the caller to specify whether or not the BTL supports async modex operations - if so, then the non-blocking “fence” operation is used, if the active PMIx component supports it. Otherwise, the default is a full blocking modex exchange as we currently perform.
* retained the current flag that directs us to use a blocking fence operation, but only to retrieve data upon demand
This commit was SVN r32570.
