* Update to 4 space tabs where relevant (and some irrelevant white
space changes)
* Move a few constants to the left of !=/==
* Add a few {}'s are one line blocks
* Use BEGIN/END_C_DECLS
* Change /**< to /** in a few places
This commit was SVN r20177.
* Add OMPI_F77_CHECK_REAL16_C_EQUV test whether REAL*16 is bit
equivalent to long double. AC_DEFINE OMPI_REAL16_MATCHES_C with
result (0 or 1).
* Update ompi_info to only show real16 support if
OMPI_REAL16_MATCHES_C is 1.
* Update DDT to only support REAL16 and COMPLEX32 if
1==OMPI_REAL16_MATCHES_C.
* MPI Op function pointer tabls will have NULL for the REAL16 and
COMPLEX32 entries if 0==OMPI_REAL16_MATCHES_C.
* Slightly cleaned up OMPI_F77_GET_ALIGNMENT and OMPI_F77_CHECK m4
tests (use OMPI_VAR_SCOPE_PUSH/POP).
This commit was SVN r19948.
The following Trac tickets were found above:
Ticket 1603 --> https://svn.open-mpi.org/trac/ompi/ticket/1603
THREAD_MULTIPLE. There's a new (hidden) MCA parameter to re-enable
these BTLs in the presence of THREAD_MULTIPLE:
btl_base_thread_multiple_override. This MCA parameter should ''only''
be used by developers who are working on make their BTLs thread safe;
it should ''not'' be used by end-users!
This commit was SVN r19826.
The following Trac tickets were found above:
Ticket 1588 --> https://svn.open-mpi.org/trac/ompi/ticket/1588
still-broken trunk build on common platforms (e.g., 64 bit Linux
RHEL4U4), I think it's clear that this code is not ready for
prime-time.
I'm backing out all the commits in the trunk/ompi/op tree from r17901
onwards. This code can be re-committed when compiles and runs on
common platforms.
cd ompi/op
svn merge -r 17907:17900 https://svn.open-mpi.org/svn/ompi/trunk/ompi/op .
This commit was SVN r17908.
The following SVN revision numbers were found above:
r17901 --> open-mpi/ompi@b9520e61dc
operations. Added to the reduction operations a set of reduction
functions that take 2 input buffers and one output buffer to avoid
some extra memory copies. These can't be used with user defined
operations. The intel c collective suite passes both original, and
new (new, not the user defined operations).
This commit was SVN r17901.
(sometimes after the merge with the ORTE branch), the opal_pointer_array
will became the only pointer_array implementation (the orte_pointer_array
will be removed).
This commit was SVN r17007.
to make checks for MPI-implementations fail in the right way ,-]
- check in configure.ac
- BINARY INCOMPATIBLE change to mpif-common.h
(if implemented the *right* way)
Actually OMPI_F90_CHECK takes two arguments, not three.
- Only have corresponding C-Type, if the opt. Fortran
type is really supported,
Otherwise pass ompi_mpi_unavailable to DECLARE_MPI_SYNONYM_DDT;
- Reviewed by George and Jeff
This commit was SVN r15133.
and George on these refinements):
* Rename the static OBJ initializer macro to be
OPAL_OBJ_STATIC_INIT(class)
* Ensure that all static OBJ initializations get a refcount of 1
(doesn't ''really'' matter, since they're static, it should never
get to the point where the OBJ is DESTRUCTed, but more correct
nonetheless)
* Add a "magic number" to the OBJ when compiling with debug support.
The magic number does some rudimentary support to ensure that
you're operating on a valid OBJ (and fails an assertion if you're
not). Check to ensure that the memory contains the magic number
when performing actions of OBJ's. Also remove the magic number
when DESTRUCTing OBJs, so that if, for example, an OBJ is
DESTRUCTed more than once, we'll fail the magic number assert.
This commit was SVN r13338.
The following SVN revision numbers were found above:
r13227 --> open-mpi/ompi@96030de97b
r13228 --> open-mpi/ompi@c2e9075d29
for the C++ bindings in MPI-2 p276-278 to see that MPI_BOOL should
work with MPI_LAND, MPI_LOR, and MPI_LXOR. Thanks to Andy Selle for
pointing this out.
This commit was SVN r9200.
- move files out of toplevel include/ and etc/, moving it into the
sub-projects
- rather than including config headers with <project>/include,
have them as <project>
- require all headers to be included with a project prefix, with
the exception of the config headers ({opal,orte,ompi}_config.h
mpi.h, and mpif.h)
This commit was SVN r8985.
implementation was not thread safe). See lengthy comment in
ompi/mpi/cxx/intercepts.cc::ompi_mpi_cxx_op_intercept() for a full
explanation.
This commit was SVN r8606.
"MPI_OP_foo")
- Remove all the handlers for MPI_REPLACE for general reductions
(it's only defined for MPI_ACCUMULATE, and ACCUMULATE is handled
differently than the other reductions, so it's safe to make all the
maps for REPLACE be empty)
This commit was SVN r8008.
MPI_UNSIGNED_LONG_LONG, MPI_LONG_LONG, and MPI_LONG_LONG_INT --
although I already had implementations of all the relevant functions
for these types. Doh!
This commit was SVN r7944.
REDUCE_SCATTER to more thoroughly check the datatype/op combination
to see if it's valid or not. If it's not, print a meaningful error
message rather than "Invalid MPI_Op" indicating what specifically
was wrong (therefore hopefully helping users track down where in the
code the problem is, and/or telling us that there's a reduction
operation combo that we don't support that we should)
- The check for whether a datatype is intrinsic needed to be updated
-- it's not sufficient to check that dtype->id < DT_MAX_PREDEFINED;
you really need to check the PREDEFINED flag on the datatype.
Thanks to George for this fix (only intrinsics have a meaningful
value in dtype->id).
This commit was SVN r7923.
at the top-level MPI API function. This allows two kinds of
scenarios:
1. MPI_Ireduce(..., op, ...);
MPI_Op_free(op);
MPI_Wait(...);
For the non-blocking collectives that we're someday planning -- to
make them analogous to non-blocking point-to-point stuff.
2. Thread 1:
MPI_Reduce(..., op, ...);
Thread 2:
MPI_Op_free(op);
Granted, for #2 to occur would tread a fine line between a correct and
erroneous MPI program, but it is possible (as long as the Op_free was
*after* MPI_reduce() had started to execute). It's more realistic
with case #1, where the Op_free() could be executed in the same thread
or a different thread.
This commit was SVN r7870.
originally suggested by Ralf Wildenhues, to try to speed autogen, configure,
and make (and possibly even make install). Use automake's include directive
to drastically reduce the number of Makefile files (although the number of
Makefile.am files is the same - most are just included in a top-level
Makefile.am). Also use an Automake SUBDIRs feature to eliminate the
dynamic-mca tree, which was no longer really needed. This makes adding
a framework easier (since you don't have to remember the dynamic-mca
tree) and makes building faster (as make doesn't have to recurse through
the dynamic-mca tree)
This commit was SVN r7777.
AM_INIT_AUTOMAKE, instead of the deprecated version.
* Work around dumbness in modern AC_INIT that requires the version
number to be set at autoconf time (instead of at configure time, as
it was before). Set the version number, minus the subversion r number,
at autoconf time. Override the internal variables to include the r
number (if needed) at configure time. Basically, the right thing
should always happen. The only place it might not is the version
reported as part of configure --help will not have an r number.
* Since AM_INIT_AUTOMAKE taks a list of options, no need to specify
them in all the Makefile.am files.
* Addes support for subdir-objects, meaning that object files are put
in the directory containing source files, even if the Makefile.am is
in another directory. This should start making it feasible to
reduce the number of Makefile.am files we have in the tree, which
will greatly reduce the time to run autogen and configure.
This commit was SVN r7211.
