(OMPI_ERR_* = OPAL_SOS_GET_ERR_CODE(ret)), since the return value could be a
SOS-encoded error. The OPAL_SOS_GET_ERR_CODE() takes in a SOS error and returns
back the native error code.
* Since OPAL_SUCCESS is preserved by SOS, also change all calls of the form
(OPAL_ERROR == ret) to (OPAL_SUCCESS != ret). We thus avoid having to
decode 'ret' to get the native error code.
This commit was SVN r23162.
The OPAL SOS framework tries to meet the following objectives:
* reduce the cascading error messages and the amount of code needed to print an error message.
* build and aggregate stacks of encountered errors and associate related individual errors with each other.
* allow registration of custom callbacks to intercept error events.
For more information, refer to
https://svn.open-mpi.org/trac/ompi/wiki/ErrorMessages
This commit was SVN r23158.
#if directives -- had to change a pair of #if conditionals in
opal/util/stacktrace.c to make the PGI compiler accept it.
This commit was SVN r22923.
The following Trac tickets were found above:
Ticket 2366 --> https://svn.open-mpi.org/trac/ompi/ticket/2366
Aleksej Saushev.
Dont use bash or bashism in shell scripts
We should use Posix' setpgid(0,0), which is equivalent to setpgrp().
This commit was SVN r22829.
Many of the OPAL_ENABLE_FT should be OPAL_ENABLE_FT_CR, so fix those.
The OPAL Layer INC should call opal_output on restart so that it can refresh the string it prints to reflect the current pid/hostname which may have changed.
This commit was SVN r22824.
discussion on the users list (see
http://www.open-mpi.org/community/lists/users/2009/12/11526.php).
Many thanks to Kevin Buckley who did most of the coding work, and to
Aleksej Saushev for his extreme patience in waiting for me to review
and commit this stuff.
This commit was SVN r22640.
If file does not exist, check the directory it lives in...
Maybe used by caller, trying to open mmap() on NFS, Lustre or
Panasas (thanks Sam).
For now, this is used to warn about the usage of mmap on such FS.
Please note, that Ralph mentioned the orte_no_session_dir parameter.
The help message includes a reference to this.
Tested on NFS and Lustre on Linux on
smoky: mpirun --mca orte_tmpdir_base $HOME/tmp -np 2 ./mpi_stub
jaguar: mpirun ... --mca orte_tmpdir_base /tmp/work/$USER ...
Fixes trac:1354
This should cmr:v1.5 once it has soaked and is shown to work on
Solaris
This commit was SVN r22604.
The following Trac tickets were found above:
Ticket 1354 --> https://svn.open-mpi.org/trac/ompi/ticket/1354
pass that on to callers of opal_cmd_line_make_opt_mca().
Thanks to Thomas Naughton III.
- Additionally, cmd-line parameters passed in table to opal_cmd_line_create()
may be wrong (e.g. OPAL_ERR_BAD_PARAM), which may be missed in the
loop.
This commit was SVN r22153.
'.', we should still find the executable - it is in a directory beneath us.
In other words, if someone gives us "foo/bar" instead of "./foo/bar", we should still be able to find bar
This commit was SVN r22110.
#if defined (c_plusplus)
defined (__cplusplus)
followed by
extern "C" {
and the closing counterpart by BEGIN_C_DECLS and END_C_DECLS.
Notable exceptions are:
- opal/include/opal_config_bottom.h:
This is our generated code, that itself defines BEGIN_C_DECL and
END_C_DECL
- ompi/mpi/cxx/mpicxx.h:
Here we do not include opal_config_bottom.h:
- Belongs to external code:
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.c
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.h
- opal/include/opal/prefetch.h:
Has C++ specific macros that are protected:
- Had #if ... } #endif _and_ END_C_DECLS (aka end up with 2x
END_C_DECLS)
ompi/mca/btl/openib/btl_openib.h
- opal/event/event.h has #ifdef __cplusplus as BEGIN_C_DECLS...
- opal/win32/ompi_process.h: had extern "C"\n {...
opal/win32/ompi_process.h: dito
- ompi/mca/btl/pcie/btl_pcie_lex.l: needed to add *_C_DECLS
ompi/mpi/f90/test/align_c.c: dito
- ompi/debuggers/msgq_interface.h: used #ifdef __cplusplus
- ompi/mpi/f90/xml/common-C.xsl: Amend
Tested on linux using --with-openib and --with-mx
The following do not contain either opal_config.h, orte_config.h or
ompi_config.h
(but possibly other header files, that include one of the above):
ompi/mca/bml/r2/bml_r2_ft.h
ompi/mca/btl/gm/btl_gm_endpoint.h
ompi/mca/btl/gm/btl_gm_proc.h
ompi/mca/btl/mx/btl_mx_endpoint.h
ompi/mca/btl/ofud/btl_ofud_endpoint.h
ompi/mca/btl/ofud/btl_ofud_frag.h
ompi/mca/btl/ofud/btl_ofud_proc.h
ompi/mca/btl/openib/btl_openib_mca.h
ompi/mca/btl/portals/btl_portals_endpoint.h
ompi/mca/btl/portals/btl_portals_frag.h
ompi/mca/btl/sctp/btl_sctp_endpoint.h
ompi/mca/btl/sctp/btl_sctp_proc.h
ompi/mca/btl/tcp/btl_tcp_endpoint.h
ompi/mca/btl/tcp/btl_tcp_ft.h
ompi/mca/btl/tcp/btl_tcp_proc.h
ompi/mca/btl/template/btl_template_endpoint.h
ompi/mca/btl/template/btl_template_proc.h
ompi/mca/btl/udapl/btl_udapl_eager_rdma.h
ompi/mca/btl/udapl/btl_udapl_endpoint.h
ompi/mca/btl/udapl/btl_udapl_mca.h
ompi/mca/btl/udapl/btl_udapl_proc.h
ompi/mca/mtl/mx/mtl_mx_endpoint.h
ompi/mca/mtl/mx/mtl_mx.h
ompi/mca/mtl/psm/mtl_psm_endpoint.h
ompi/mca/mtl/psm/mtl_psm.h
ompi/mca/pml/cm/pml_cm_component.h
ompi/mca/pml/csum/pml_csum_comm.h
ompi/mca/pml/dr/pml_dr_comm.h
ompi/mca/pml/dr/pml_dr_component.h
ompi/mca/pml/dr/pml_dr_endpoint.h
ompi/mca/pml/dr/pml_dr_recvfrag.h
ompi/mca/pml/example/pml_example.h
ompi/mca/pml/ob1/pml_ob1_comm.h
ompi/mca/pml/ob1/pml_ob1_component.h
ompi/mca/pml/ob1/pml_ob1_endpoint.h
ompi/mca/pml/ob1/pml_ob1_rdmafrag.h
ompi/mca/pml/ob1/pml_ob1_recvfrag.h
ompi/mca/pml/v/pml_v_output.h
opal/include/opal/prefetch.h
opal/mca/timer/aix/timer_aix.h
opal/util/qsort.h
test/support/components.h
This commit was SVN r21855.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
not end up in OPAL
- Will post an updated patch for the OMPI_ALIGNMENT_ parts (within C).
This commit was SVN r21342.
The following SVN revision numbers were found above:
r21330 --> open-mpi/ompi@95596d1814
into the OPAL namespace, eliminating cases like opal/util/arch.c
testing for ompi_fortran_logical_t.
As this is processor- and compiler-related information
(e.g. does the compiler/architecture support REAL*16)
this should have been on the OPAL layer.
- Unifies f77 code using MPI_Flogical instead of opal_fortran_logical_t
- Tested locally (Linux/x86-64) with mpich and intel testsuite
but would like to get this week-ends MTT output
- PLEASE NOTE: configure-internal macro-names and
ompi_cv_ variables have not been changed, so that
external platform (not in contrib/) files still work.
This commit was SVN r21330.
Emit a more informative error message when the file descriptor limit is
reached during an accept() call. Also, abort when the accept fails to
avoid an infinite loop.
Emit a more informative error message when the help file can't be opened.
This commit was SVN r21271.
The following Trac tickets were found above:
Ticket 1930 --> https://svn.open-mpi.org/trac/ompi/ticket/1930
OMPI_* to OPAL_*. This allows opal layer to be used more independent
from the whole of ompi.
NOTE: 9 "svn mv" operations immediately follow this commit.
This commit was SVN r21180.
Check for error in fcntl, as we depend on close-on-exec,
F_SETFD will result in -1 in case of error (stored in errno).
To not have a follow-up warning about not freeing filename, move up.
This commit was SVN r21171.
- Delete unnecessary header files using
contrib/check_unnecessary_headers.sh after applying
patches, that include headers, being "lost" due to
inclusion in one of the now deleted headers...
In total 817 files are touched.
In ompi/mpi/c/ header files are moved up into the actual c-file,
where necessary (these are the only additional #include),
otherwise it is only deletions of #include (apart from the above
additions required due to notifier...)
- To get different MCAs (OpenIB, TM, ALPS), an earlier version was
successfully compiled (yesterday) on:
Linux locally using intel-11, gcc-4.3.2 and gcc-SVN + warnings enabled
Smoky cluster (x86-64 running Linux) using PGI-8.0.2 + warnings enabled
Lens cluster (x86-64 running Linux) using Pathscale-3.2 + warnings enabled
This commit was SVN r21096.
several header files (previously included by header-files)
now have to be moved "upward".
This is mainly system headers such as string.h, stdio.h and for
networking, but also some orte headers.
This commit was SVN r21095.
We currently apply all of the MCA params in the parent job to the child. This commit allows a user to specify additional params for the child job, and to override any pre-existing params with the new value so they can better control behavior of the child job.
This commit was SVN r20989.
1. Probe the signal number that we want
1. If a handler is already installed there:
1. if the opal_signal MCA param entry for this signal is suffixed
with ":complain", then output a show_help message
1. do not install our signal handler
1. otherwise, install our signal handler
Hence, we've shifted to a policy of only complaining if the user asks
us to complain.
This commit was SVN r20969.
The following Trac tickets were found above:
Ticket 1871 --> https://svn.open-mpi.org/trac/ompi/ticket/1871
Add two new configure options that specify:
1. when to add padding to the openib control header - this *only* happens when the configure option is specified
2. when to use the dr-like checksum as opposed to the memcpy checksum. Not selectable at runtime - to eliminate performance impacts, this is a configure-only option
Also removed an unused checksum version from opal/util/crc.h.
The new component still needs a little cleanup and some sync with recent ob1 bug fixes. It was created as a separate module to avoid performance hits in ob1 itself, though most of the code is duplicative. The component is only selectable by either specifying it directly, or configuring with the dr-like checksum -and- setting -mca pml_csum_enable_checksum 1.
Modify the LANL platform files to take advantage of the new module.
This commit was SVN r20846.
handlers if there are already non-default handlers installed. Print a
warning if that situation arises.
'''NOTE:''' This is a definite target for OPAL_SOS conversion -- as it
is right now, this message will be displayed for ''every'' MPI
process. We want this to be OPAL_SOS'ed when that becomes available
so that the error message can be aggregated nicely.
This commit was SVN r20831.
In case we use memcmp, strlen, strup and friends include <string.h>
Also several constants.h are not included directly
- Let's have mca_topo_base_cart_create return ompi-errors in
ompi/mca/topo/base/topo_base_cart_create.c
This commit was SVN r20773.
get bitten by header depending on having already included
the corresponding [opal|orte|ompi]_config.h header.
When separating, things like [OPAL|ORTE|OMPI]_DECLSPEC
are missed.
Script to add the corresponding header in front of all following
(taking care of possible #ifdef HAVE_...)
- Including some minor cleanups to
- ompi/group/group.h -- include _after_ #ifndef OMPI_GROUP_H
- ompi/mca/btl/btl.h -- nclude _after_ #ifndef MCA_BTL_H
- ompi/mca/crcp/bkmrk/crcp_bkmrk_btl.c -- still no need for
orte/util/output.h
- ompi/mca/pml/dr/pml_dr_recvreq.c -- no need for mpool.h
- ompi/mca/btl/btl.h -- reorder to fit
- ompi/mca/bml/bml.h -- reorder to fit
- ompi/runtime/ompi_mpi_finalize.c -- reorder to fit
- ompi/request/request.h -- additionally need ompi/constants.h
- Tested on linux/x86-64
This commit was SVN r20720.
a private IPv4 address. By deafult we obide to the RFC1918 and RFC3330, but we have
the opportunity to change them.
Based on a patch from Camille Coti.
This commit was SVN r20706.
* compute mmap-file size more wisely and pass requested size to allocator
* change MCA parameters:
- get rid of mpool_sm_per_peer_size
- get rid of mpool_sm_max_size
- set default mpool_sm_min_size to 0
* no longer pad sm allocations to page boundaries
* have sm_btl_first_time_init check return codes on free-list creations
Have mca_btl_sm_prepare_src() check to see if it can allocate an EAGER fragment
rather than a MAX fragment if the smaller size works.
Remove ompi/class/ompi_[circular_buffer_]fifo.h and references thereto.
Remove opal/util/pow2.[c|h] and references thereto.
This commit was SVN r20614.
Basically, the remaining problem turned out to be:
1. closing stdout/stderr during orte_finalize of mpirun
2. inadvertently setting up a write event on fd = -1
3. devising a scheme to more accurately track when the stdin write event was active vs closed so it only got released once
This passed prelim MTT testing by Jeff and Tim, but should soak for awhile before migrating to 1.3.
This commit was SVN r20106.
The following SVN revision numbers were found above:
r20064 --> open-mpi/ompi@a07660aea8
r20068 --> open-mpi/ompi@ec930d14a9
r20074 --> open-mpi/ompi@2940309613
because we wasted a good amount of time today assuming that it was
returning the actual netmask. Specifically, we were confused why it
returned 0x18 instead of 0xffffff00 for a class C subnet (the
head-smacking moment wasn't until [much] later when we converted 0x18
to decimal, which is 24. Then the Clue Light(tm) went on).
This commit was SVN r20002.
parameters on the connecting side also. Also move define of IF_NAMESIZE
into if.h file. And lastly, add one verbose debug message which may be
useful if we run into other issues like this.
This commit fixes trac:1573.
This commit was SVN r19932.
The following Trac tickets were found above:
Ticket 1573 --> https://svn.open-mpi.org/trac/ompi/ticket/1573
Standardize the handling of the orte launch agent option across PLMs. This has been a consistent complaint I have received - each PLM would register its own MCA param to get input on the launch agent for remote nodes (in fact, one or two didn't, but most did). This would then get handled in various and contradictory ways.
Some PLMs would accept only a one-word input. Others accepted multi-word args such as "valgrind orted", but then some would error by putting any prefix specified on the cmd line in front of the incorrect argument.
For example, while using the rsh launcher, if you specified "valgrind orted" as your launch agent and had "--prefix foo" on you cmd line, you would attempt to execute "ssh foo/valgrind orted" - which obviously wouldn't work.
This was all -very- confusing to users, who had to know which PLM was being used so they could even set the right mca param in the first place! And since we don't warn about non-recognized or non-used mca params, half of the time they would wind up not doing what they thought they were telling us to do.
To solve this problem, we did the following:
1. removed all mca params from the individual plms for the launch agent
2. added a new mca param "orte_launch_agent" for this purpose. To further simplify for users, this comes with a new cmd line option "--launch-agent" that can take a multi-word string argument. The value of the param defaults to "orted".
3. added a PLM base function that processes the orte_launch_agent value and adds the contents to a provided argv array. This can subsequently be harvested at-will to handle multi-word values
4. modified the PLMs to use this new function. All the PLMs except for the rsh PLM required very minor change - just called the function and moved on. The rsh PLM required much larger changes as - because of the rsh/ssh cmd line limitations - we had to correctly prepend any provided prefix to the correct argv entry.
5. added a new opal_argv_join_range function that allows the caller to "join" argv entries between two specified indices
Please let me know of any problems. I tried to make this as clean as possible, but cannot compile all PLMs to ensure all is correct.
This commit was SVN r19097.
After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach.
I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive.
This commit was SVN r18619.
such, the commit message back to the master SVN repository is fairly
long.
= ORTE Job-Level Output Messages =
Add two new interfaces that should be used for all new code throughout
the ORTE and OMPI layers (we already make the search-and-replace on
the existing ORTE / OMPI layers):
* orte_output(): (and corresponding friends ORTE_OUTPUT,
orte_output_verbose, etc.) This function sends the output directly
to the HNP for processing as part of a job-specific output
channel. It supports all the same outputs as opal_output()
(syslog, file, stdout, stderr), but for stdout/stderr, the output
is sent to the HNP for processing and output. More on this below.
* orte_show_help(): This function is a drop-in-replacement for
opal_show_help(), with two differences in functionality:
1. the rendered text help message output is sent to the HNP for
display (rather than outputting directly into the process' stderr
stream)
1. the HNP detects duplicate help messages and does not display them
(so that you don't see the same error message N times, once from
each of your N MPI processes); instead, it counts "new" instances
of the help message and displays a message every ~5 seconds when
there are new ones ("I got X new copies of the help message...")
opal_show_help and opal_output still exist, but they only output in
the current process. The intent for the new orte_* functions is that
they can apply job-level intelligence to the output. As such, we
recommend that all new ORTE and OMPI code use the new orte_*
functions, not thei opal_* functions.
=== New code ===
For ORTE and OMPI programmers, here's what you need to do differently
in new code:
* Do not include opal/util/show_help.h or opal/util/output.h.
Instead, include orte/util/output.h (this one header file has
declarations for both the orte_output() series of functions and
orte_show_help()).
* Effectively s/opal_output/orte_output/gi throughout your code.
Note that orte_output_open() takes a slightly different argument
list (as a way to pass data to the filtering stream -- see below),
so you if explicitly call opal_output_open(), you'll need to
slightly adapt to the new signature of orte_output_open().
* Literally s/opal_show_help/orte_show_help/. The function signature
is identical.
=== Notes ===
* orte_output'ing to stream 0 will do similar to what
opal_output'ing did, so leaving a hard-coded "0" as the first
argument is safe.
* For systems that do not use ORTE's RML or the HNP, the effect of
orte_output_* and orte_show_help will be identical to their opal
counterparts (the additional information passed to
orte_output_open() will be lost!). Indeed, the orte_* functions
simply become trivial wrappers to their opal_* counterparts. Note
that we have not tested this; the code is simple but it is quite
possible that we mucked something up.
= Filter Framework =
Messages sent view the new orte_* functions described above and
messages output via the IOF on the HNP will now optionally be passed
through a new "filter" framework before being output to
stdout/stderr. The "filter" OPAL MCA framework is intended to allow
preprocessing to messages before they are sent to their final
destinations. The first component that was written in the filter
framework was to create an XML stream, segregating all the messages
into different XML tags, etc. This will allow 3rd party tools to read
the stdout/stderr from the HNP and be able to know exactly what each
text message is (e.g., a help message, another OMPI infrastructure
message, stdout from the user process, stderr from the user process,
etc.).
Filtering is not active by default. Filter components must be
specifically requested, such as:
{{{
$ mpirun --mca filter xml ...
}}}
There can only be one filter component active.
= New MCA Parameters =
The new functionality described above introduces two new MCA
parameters:
* '''orte_base_help_aggregate''': Defaults to 1 (true), meaning that
help messages will be aggregated, as described above. If set to 0,
all help messages will be displayed, even if they are duplicates
(i.e., the original behavior).
* '''orte_base_show_output_recursions''': An MCA parameter to help
debug one of the known issues, described below. It is likely that
this MCA parameter will disappear before v1.3 final.
= Known Issues =
* The XML filter component is not complete. The current output from
this component is preliminary and not real XML. A bit more work
needs to be done to configure.m4 search for an appropriate XML
library/link it in/use it at run time.
* There are possible recursion loops in the orte_output() and
orte_show_help() functions -- e.g., if RML send calls orte_output()
or orte_show_help(). We have some ideas how to fix these, but
figured that it was ok to commit before feature freeze with known
issues. The code currently contains sub-optimal workarounds so
that this will not be a problem, but it would be good to actually
solve the problem rather than have hackish workarounds before v1.3 final.
This commit was SVN r18434.
Restore the "do-not-launch" functionality so users can test a mapping without launching it.
Add a "do-not-resolve" cmd line flag to mpirun so the opal/util/if.c code does not attempt to resolve network addresses, thus enabling a user to test a hostfile mapping without hanging on network resolve requests.
Add a function to hostfile to generate an ordered list of host names from a hostfile
This commit was SVN r18190.
environment variables in a consistent manner. These functions
retrieve the user and the temporary directories (based on the
system).
This commit was SVN r17815.
seemed to be the right thing(tm), but broke the Sun Studio C++
compiler under Linux (ticket 747).
This patch should allow inclusion into C and C++ from other header
files without problems.
This commit was SVN r17792.
The following SVN revision numbers were found above:
r17488 --> open-mpi/ompi@d53131f261
r17504 --> open-mpi/ompi@b22e8e7567
This patch fixes the segfault, so closing the ticket might be possible.
It's a very conservative patch. Perhaps the freeaddrinfo spec says that
it will never allocate res in case of errors, but for now, I neither
have the spec nor the will to rely on it.
This commit was SVN r17150.
* General TCP cleanup for OPAL / ORTE
* Simplifying the OOB by moving much of the logic into the RML
* Allowing the OOB RML component to do routing of messages
* Adding a component framework for handling routing tables
* Moving the xcast functionality from the OOB base to its own framework
Includes merge from tmp/bwb-oob-rml-merge revisions:
r15506, r15507, r15508, r15510, r15511, r15512, r15513
This commit was SVN r15528.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r15506
r15507
r15508
r15510
r15511
r15512
r15513
asprintf and friends. This is not a failsafe; there are many cases
where this check will not be used. But at least it's something...
This commit was SVN r15500.
opal_net_get_hostname() rather than malloc, because no one was freeing
the buffer and the common use case was for printfs, where calling
free is a pain.
This commit was SVN r15494.
VxWorks. Still some issues remaining, I'm sure.
Refs trac:1010
This commit was SVN r15320.
The following Trac tickets were found above:
Ticket 1010 --> https://svn.open-mpi.org/trac/ompi/ticket/1010
flex (which, incidentally, emit ''more'' warnings than earlier
versions). Grumble.
This commit was SVN r15166.
The following SVN revision numbers were found above:
r15158 --> open-mpi/ompi@57d09c10f7
symbols in them and environ is defined only in the final application
(probably in crt1.o). Apple provides a function for getting at the
environment, so use that instead if it's available.
This commit was SVN r14857.
* Move ipv6comat.h code into opal_config_bottom.h and change into some
more intelligent testing of structures
* Change opal's if interface to use sockaddr instead of sockaddr_storage,
as the RFCs suggest we do
* Move the networking code in opal that isn't directly related to if
detection into net.h
* Add quicky function to get the port out of either a sockaddr_in
or sockaddr_in6, saving a bunch of code in the oob.
* Update TCP oob and btl with new interface
This commit was SVN r14679.
because the Sun Studio compiler did not recognize __const.
This commit fixes trac:1011.
This commit was SVN r14558.
The following Trac tickets were found above:
Ticket 1011 --> https://svn.open-mpi.org/trac/ompi/ticket/1011
- make opal_sockaddr2str() take a sockaddr_storage instead of a sockaddr_in6
so that it works for IPv4 and IPv6 addresses, and remove a whole bunch
of #ifs in the OOOB code.
- Fix a compiler warning in the TCP BTL due to run-time determined
array size by making it a dynamicly allocated array.
- Fix the unpacking code of IPv4 addresses when using IPv6 support, so
that the address is in the correct location (instead of in an IPv6
structure, use an IPv4 structure). Refs trac:1005.
This commit was SVN r14514.
The following Trac tickets were found above:
Ticket 1005 --> https://svn.open-mpi.org/trac/ompi/ticket/1005
finally brings in functionality that is already on the 1.2 branch, and
was developed and tested in the v1.2ofed branch (and other places).
Short version of new features:
* Support for ibv_fork_init()
* Automatically fill in the openib BTL bandwidth value by
querying the HCA port
* Installdirs functionality
* Fixes to always use -I in the Fortran wrapper compilers (#924)
* Gleb's mpool updates
* Remove some kruft in btl/openib/configure.m4, therefore
fixing the harmless warnings noted in #665
* Bunches of updates to the Linux RPM spec file
I.e., effectively the same thing that r14411 brought to the v1.2
branch.
Also effectively brought in r14432 and r14433 (some fixes on top of
the original r14411 commit to v1.2). Still need to bring in the moral
equivalent of r14445 after this commit (fixes to installdirs).
This commit was SVN r14449.
The following SVN revision numbers were found above:
r14411 --> open-mpi/ompi@83b31314ae
r14432 --> open-mpi/ompi@a48f160595
r14433 --> open-mpi/ompi@68f346d2bc
r14445 --> open-mpi/ompi@13d366b827
that makes sense or not, it is allowed and it is done). Remove the compiler
hint that the argument will never be NULL. Fixes a segfault in oob init
code when opal_argv_split() was called with a NULL first argument.
This commit was SVN r14440.
VXWorks, for example). Checked with George before committing this to
ensure that nothing broke on Windows -- he said it was ok.
This commit was SVN r14388.
__opal_attribute_nonnull__, __opal_attribute_warn_unused_result__,
__opal_attribute_malloc__, __opal_attribute_sentinel__ and
__opal_attribute_format__
This commit was SVN r14078.
builds, so disable it there
* On 10.4.8 (and possibly others), siginfo is NULL in the signal
callback on 64 bit Intel builds, so account for that in the signal
callback.
This commit was SVN r14045.
- mca_base_param_file_prefix
(Default: NULL)
This is the fullname of the "-am" mpirun option. Used to specify a ':'
separated list of AMCA parameter set files.
- mca_base_param_file_path
(Default: $SYSCONFDIR/amca-param-sets/:$CWD)
The path to search for AMCA files with relative paths. A warning will be
printed if the AMCA file cannot be found.
* Added a new function "mca_base_param_recache_files" the re-reads the file
configurations. This is used internally to help bootstrap the MCA system.
* Added a new orterun/mpirun command line option '-am' that aliases for the
mca_base_param_file_prefix MCA parameter
* Exposed the opal_path_access function as it is generally useful in other
places in the code.
* New function "opal_cmd_line_make_opt_mca" which will allow you to append a
new command line option with MCA parameter identifiers to set at the same
time. Previously this could only be done at command line declaration time.
* Added a new directory under the $pkgdatadir named "amca-param-sets" where all
the 'shipped with' Open MPI AMCA parameter sets are placed. This is the first
place to search for AMCA sets with relative paths.
* An example.conf AMCA parameter set file is located in
contrib/amca-param-sets/.
* Jeff Squyres contributed an OpenIB AMCA set for benchmarking.
Note: You will need to autogen with this commit as it adds a configure param.
Sorry :(
This commit was SVN r13867.
Add new function opal_get_num_processors() that will return the number
of processors on the local host. Does the Right thing in POSIX
environments (to include a special case for OS X), and will shortly do
the Right Thing for Windows (this commit includes a change to
configure, so I wanted to get that in before the US workday -- the
Windows code can some shortly because it won't involve configury
changes).
This commit was SVN r13506.
The following Trac tickets were found above:
Ticket 853 --> https://svn.open-mpi.org/trac/ompi/ticket/853
comment explaining the patch in the patch.
Refs trac:574
This commit was SVN r13276.
The following Trac tickets were found above:
Ticket 574 --> https://svn.open-mpi.org/trac/ompi/ticket/574
environment variable, so it's not so useful (arg!). Instead, get the
hostname during opal_init(). Don't want to call gethostname() during
the signal handler. While we're at it, only print the machine name
so that the output isn't so wide
Refs trac:538
This commit was SVN r12886.
The following Trac tickets were found above:
Ticket 538 --> https://svn.open-mpi.org/trac/ompi/ticket/538
* Print out header that a signal was received
Refs trac:538
This commit was SVN r12884.
The following Trac tickets were found above:
Ticket 538 --> https://svn.open-mpi.org/trac/ompi/ticket/538
* Have darwin backtrace code return an error when buffer() is
called, since it is not imnplemented
* Print out hostname & pid when giving signal information
* If backtrace_buffer() is implemented, use that instead of
backtrace_print() and prefix stacktrace with the hostname
* Make the signal information printed be more user friendly
* If we're using the backtrace_buffer() code, don't print
the last two functions (which will be show_stackframe()
then backtrace_buffer()) so that users won't keep thinking
the error occurred inside Open MPI (sneaky, yes...)
Refs trac:538
This commit was SVN r12883.
The following Trac tickets were found above:
Ticket 538 --> https://svn.open-mpi.org/trac/ompi/ticket/538
1. For OS's without the dirent.d_type field, we were potentially
not initializing a filename string. This could result in a
directory not being cleaned up.
2. Potential memory leaks in filename strings that were allocated.
Refs trac:678
This commit was SVN r12853.
The following Trac tickets were found above:
Ticket 678 --> https://svn.open-mpi.org/trac/ompi/ticket/678
size and diplacement of data-type. After this patch all data can contain size_t bytes
and the displacements are defined as ptrdiff_t. All of the files I was able to compile
have been modified to match this requirement.
This commit was SVN r12146.
I was running into where if a string in the argument list contains a printf
escape sequence, we would segfault. In particular, I was using opal_output
to print the environment and had something like:
LESSOPEN=|/usr/bin/lesspipe.sh %s
in my environment. So I called opal_output(0, "%s", environ[i]) and
got a segfault because the fprintf tried to expand the %s in the
environment variable
This commit was SVN r12094.
the data is in network byte order and we want it in host byte order so
we can modify it. The big issue, though, is that 127 is 0x7F, not 0x74,
so there was the possibility of false positives with this test...
This commit was SVN r11919.
__DARWIN_ALIGN_POWER define from the last release of the OS X compiler
toolchain. The bug in net/if.h, however, is still there. So look
for the hints that we're on a 64 bit Apple PowerPC instead.
* If we don't find a buffer size that works by 10MB, we're never
going to. So add some code to limit the buffer size we'll try
so that we don't fall into an infinite loop
* Detect errors in opal_ifcount in the oob init code
Refs trac:420
This commit was SVN r11825.
The following Trac tickets were found above:
Ticket 420 --> https://svn.open-mpi.org/trac/ompi/ticket/420
the initialization in the start of the function is going to remain for
the life of the function is erroneous. Need to initialize before
using in the snprintf() call.
Refs trac:340
This commit was SVN r11781.
The following Trac tickets were found above:
Ticket 340 --> https://svn.open-mpi.org/trac/ompi/ticket/340
opal_dirname have the same behavior all the time. It does not modify
the original string and it returns a freshly allocated string.
This commit was SVN r11443.
The same treatement will happens on all sub-projects. The .h files
have to be C++ compatibles and all symbols with an external visibility
have to get the {PROJECT}_DECLSPEC in front of the prototype.
This commit was SVN r11340.
range of OS friendly path management functions, such as opal_basename
opal_dirname. They should always be used instead of basename and
dirname. There are several functions which allow us to create paths
that are compatible with the OS.
The OPAL_ENV_SEP define should be used (instead of ':') when a env
variable is splitted.
This commit was SVN r11336.
Windows version for the libevent. The one they provide is more than
innapropriate for what we need (without talking about the fact that
the code is just plain wrong).
This commit was SVN r11329.
different macros, one for each project. Therefore, now we have OPAL_DECLSPEC,
ORTE_DECLSPEC and OMPI_DECLSPEC. Please use them based on the sub-project.
This commit was SVN r11270.
- orte-clean.c : check to see if the base session directory is empty
and delete it if it is.
- orte_universe_exists.c : Fix a down stread problem resulting from
George's r10718 commit. Don't use the 'fulldirpath' since
that is no longer guarenteed to be the absolute path
to the session directory. Construct this value outside of that
function from the prefix and frontend vars.
This commit was SVN r10741.
The following SVN revision numbers were found above:
r10718 --> open-mpi/ompi@47eef2e002
After seeing the uglyness that is removing directories in the
codebase I decided to push down this to the OPAL by extending the
opal/os_create_dirpath.(c|h) to contain some more functionality.
In this process I renamed 'os_create_dirpath' to 'os_dirpath' since it
is a bit more general now.
Added a few functions to:
- check if an directory is empty
- check to see if the access permissions are set correctly
- destroy the directory at the end of the dirpath
- By using a caller callback function (a la Perl, I believe)
for every file, the caller can have fine grained control over
whether a specific file is deleted or not.
This simplifies things a bit for orte_session_dir_(finalize|cleanup)
as it should no longer contain any of this functionality, but uses
these functions to do the work.
From the external perspective nothing has changed, from the
developer point of view we have some cleaner, more generic code.
This commit was SVN r10640.
flag, new flags to be included when convertor is initialized
- modified pml/btl module defs and added stub functions for diagnostic
output routines to dump state of queues / endpoints
- updates to data reliability pml
This commit was SVN r9329.
installation directories) in configure, the files that depend on this
information are not properly rebuilt. If you need this information,
don't setup a -D in the Makefile.am - instead, include
opal/install_dirs.h.
* Use the : option in AC_CONFIG_FILES to avoid needing to expose that
we are playing around with temporary files with our headers to avoid
rebuilding
* Clean up the version file information a bit, and like the install
directory stuff, make sure that there is a dependency so that
ompi_info gets rebuilt properly when a version number changes.
This commit was SVN r9256.
was causing problems (indeed, we don't have it in LAM and it hasn't caused
problems in the last many many years). Standard I/O forwarding now works
properly on Solaris in both 32 and 64 bit builds
* Add NEWS item about standard I/O on platforms without openpty()
This commit was SVN r9255.
This should go to the v1.0 branch with r9223.
This commit was SVN r9224.
The following SVN revision numbers were found above:
r9223 --> open-mpi/ompi@d71750d073
still allows its state to be modified (Solaris on Opteron, for example),
so we need to copy the va_list if we are going to use it twice. Fixes
a segfault on Opteron Solaris. Thanks to Pierre Valiron for reporting
the issue and for providing access for testing.
This needs to go to the 1.0 branch.
This commit was SVN r9223.
- move files out of toplevel include/ and etc/, moving it into the
sub-projects
- rather than including config headers with <project>/include,
have them as <project>
- require all headers to be included with a project prefix, with
the exception of the config headers ({opal,orte,ompi}_config.h
mpi.h, and mpif.h)
This commit was SVN r8985.
world writable by default. We shouldn't be setting the umask, period, unless
we restore it before we fork off the user's process. Since we don't have a
way of doing that now, just leave the umask alone.
This should go to the v1.0 branch
This commit was SVN r8935.
r8698), with changes below:
- Split wrapper flags into those required for each of the three projects,
and cleaned up some cruft (including the LIBMPI_EXTRA_*FLAGS) through-
out the build system
- Added opal_init_util and opal_finalize_util to allow init / cleanup
of all the opal code that doesn't require the MCA system
- Create standalone key=value file parser, based on the one that used
to be in the mca param parser, so that it can be shared in multiple
places
- Add wrapper datafiles for opal, orte, and ompi wrappers, and add
wrapper compiler with support for all the old features
This commit was SVN r8699.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r8690
r8698
- add the right asm format
- add checks for some constants / fields that cygwin
doesn't have in the stacktrace code
- fix for slightly more verbose libtool 2 betas that
have multiple lines for link output
This commit was SVN r8501.
AC_CHECK_FUNCS, so #ifdef is the correct preprocessor conditional here
(because it will be defined or not -- not always defined to, say, 0 or
1).
This commit was SVN r7781.
out-of-bounds protection for output ID's in some functions. Also,
move some logic for closing the syslog inside a conditional block --
it's only necessary to close the syslog if we actually closed a
stream.
This commit was SVN r7518.
that multiple processes don't overwrite each other. Change that
default in orte_init_stage1() to just "output-" (because the file will
be in a process-unique directory at that point; the pid is no longer
necessary).
This commit was SVN r7256.
opal_output_set_output_file_info(). This allows getting and setting
the default directory where output stream files will be opened (for
all *new* streams). Before this function is not invoked, the default
location is $TMPDIR or $HOME (if $TMPDIR is not defined).
Added a call into orte_init_stage1() to call this function
immediately after the session directory is created and set the default
location of stream files to be the process' session directory.
This commit was SVN r7254.
a constructor, like the rest of the code base
- Convert usage in the tree to use the constructor to zero out an
instance of opal_output_stream_t
- Still need to re-enable output files
This commit was SVN r7253.
AM_INIT_AUTOMAKE, instead of the deprecated version.
* Work around dumbness in modern AC_INIT that requires the version
number to be set at autoconf time (instead of at configure time, as
it was before). Set the version number, minus the subversion r number,
at autoconf time. Override the internal variables to include the r
number (if needed) at configure time. Basically, the right thing
should always happen. The only place it might not is the version
reported as part of configure --help will not have an r number.
* Since AM_INIT_AUTOMAKE taks a list of options, no need to specify
them in all the Makefile.am files.
* Addes support for subdir-objects, meaning that object files are put
in the directory containing source files, even if the Makefile.am is
in another directory. This should start making it feasible to
reduce the number of Makefile.am files we have in the tree, which
will greatly reduce the time to run autogen and configure.
This commit was SVN r7211.
tree.
- fix up #include's throughout the tree (yay contrib/search_replace.pl!)
- remove a few extraneous #include's
- remove orte_sys_info*() from opal_init()/opal_finalize() (it's
already in orte_init_stage1() and orte_system_finalize())
- remove dependencies in opal on orte_system_info -- util/os_path.c
and util/os_create_dirpath.c (they only used path_sep, anyway --
easily changed to #defines)
This commit was SVN r7059.
prototype than everyone else. It's only active if _GNU_SOURCE is
definted, which of course we have to have defined for asprintf.
So just use strerror() underneath
This commit was SVN r7002.
- If passing in a valid argv array with no members (so argv[0] == NULL),
opal_argv_copy() should return a valid argv array with no members,
instead of NULL.
- make sure to update the argc value when deleting members of an array
This commit was SVN r6977.
OPAL_ERROR, same for all the other error codes. Also, make sure that there
are never conflicts between OPAL anr ORTE error codes (for example).
Finally, provide opal_perror(), opal_strerror(), and opal_strerror_r() to
give stringified error messages for the different error codes
This commit was SVN r6969.
ompi/).
- There's still a handful of places that have orte/ #include files;
still need to clean those up
- A lot of places still use ompi/include/constants.h -- those need to
be converted over to use OPAL_ return codes and then switch to the
opal constants.h. This commit is the first few steps towards
that...
This commit was SVN r6843.
