:-)
Okay, cleanup the prior commit so that the default component search path shows in ompi_info, and remains available in component_find.
This commit was SVN r22278.
"my_perfect_path":SYSTEM_DEFAULT:USER_DEFAULT
and OPAL will substitute its internally derived values for the defaults (instead of forcing the user to figure them out).
This commit was SVN r22272.
#if defined (c_plusplus)
defined (__cplusplus)
followed by
extern "C" {
and the closing counterpart by BEGIN_C_DECLS and END_C_DECLS.
Notable exceptions are:
- opal/include/opal_config_bottom.h:
This is our generated code, that itself defines BEGIN_C_DECL and
END_C_DECL
- ompi/mpi/cxx/mpicxx.h:
Here we do not include opal_config_bottom.h:
- Belongs to external code:
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.c
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.h
- opal/include/opal/prefetch.h:
Has C++ specific macros that are protected:
- Had #if ... } #endif _and_ END_C_DECLS (aka end up with 2x
END_C_DECLS)
ompi/mca/btl/openib/btl_openib.h
- opal/event/event.h has #ifdef __cplusplus as BEGIN_C_DECLS...
- opal/win32/ompi_process.h: had extern "C"\n {...
opal/win32/ompi_process.h: dito
- ompi/mca/btl/pcie/btl_pcie_lex.l: needed to add *_C_DECLS
ompi/mpi/f90/test/align_c.c: dito
- ompi/debuggers/msgq_interface.h: used #ifdef __cplusplus
- ompi/mpi/f90/xml/common-C.xsl: Amend
Tested on linux using --with-openib and --with-mx
The following do not contain either opal_config.h, orte_config.h or
ompi_config.h
(but possibly other header files, that include one of the above):
ompi/mca/bml/r2/bml_r2_ft.h
ompi/mca/btl/gm/btl_gm_endpoint.h
ompi/mca/btl/gm/btl_gm_proc.h
ompi/mca/btl/mx/btl_mx_endpoint.h
ompi/mca/btl/ofud/btl_ofud_endpoint.h
ompi/mca/btl/ofud/btl_ofud_frag.h
ompi/mca/btl/ofud/btl_ofud_proc.h
ompi/mca/btl/openib/btl_openib_mca.h
ompi/mca/btl/portals/btl_portals_endpoint.h
ompi/mca/btl/portals/btl_portals_frag.h
ompi/mca/btl/sctp/btl_sctp_endpoint.h
ompi/mca/btl/sctp/btl_sctp_proc.h
ompi/mca/btl/tcp/btl_tcp_endpoint.h
ompi/mca/btl/tcp/btl_tcp_ft.h
ompi/mca/btl/tcp/btl_tcp_proc.h
ompi/mca/btl/template/btl_template_endpoint.h
ompi/mca/btl/template/btl_template_proc.h
ompi/mca/btl/udapl/btl_udapl_eager_rdma.h
ompi/mca/btl/udapl/btl_udapl_endpoint.h
ompi/mca/btl/udapl/btl_udapl_mca.h
ompi/mca/btl/udapl/btl_udapl_proc.h
ompi/mca/mtl/mx/mtl_mx_endpoint.h
ompi/mca/mtl/mx/mtl_mx.h
ompi/mca/mtl/psm/mtl_psm_endpoint.h
ompi/mca/mtl/psm/mtl_psm.h
ompi/mca/pml/cm/pml_cm_component.h
ompi/mca/pml/csum/pml_csum_comm.h
ompi/mca/pml/dr/pml_dr_comm.h
ompi/mca/pml/dr/pml_dr_component.h
ompi/mca/pml/dr/pml_dr_endpoint.h
ompi/mca/pml/dr/pml_dr_recvfrag.h
ompi/mca/pml/example/pml_example.h
ompi/mca/pml/ob1/pml_ob1_comm.h
ompi/mca/pml/ob1/pml_ob1_component.h
ompi/mca/pml/ob1/pml_ob1_endpoint.h
ompi/mca/pml/ob1/pml_ob1_rdmafrag.h
ompi/mca/pml/ob1/pml_ob1_recvfrag.h
ompi/mca/pml/v/pml_v_output.h
opal/include/opal/prefetch.h
opal/mca/timer/aix/timer_aix.h
opal/util/qsort.h
test/support/components.h
This commit was SVN r21855.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
- add a cmake module for searching libltdl libraries and headers
- a configure option to enable DSO build, default OFF.
- update a few source files for including correct header
and loading correct mca libraries path/suffix.
This commit was SVN r21804.
Libltdl erroneously returns an error string of "file not found" for
lots of reasons, even if the file really *is* there, but just failed
to dlopen() for some reason. So if lt_dlerror() returns "file not
found", do some simple hueristics and if we *do* find a file, print a
slightly better error message.
This commit was SVN r21214.
OMPI_* to OPAL_*. This allows opal layer to be used more independent
from the whole of ompi.
NOTE: 9 "svn mv" operations immediately follow this commit.
This commit was SVN r21180.
- Delete unnecessary header files using
contrib/check_unnecessary_headers.sh after applying
patches, that include headers, being "lost" due to
inclusion in one of the now deleted headers...
In total 817 files are touched.
In ompi/mpi/c/ header files are moved up into the actual c-file,
where necessary (these are the only additional #include),
otherwise it is only deletions of #include (apart from the above
additions required due to notifier...)
- To get different MCAs (OpenIB, TM, ALPS), an earlier version was
successfully compiled (yesterday) on:
Linux locally using intel-11, gcc-4.3.2 and gcc-SVN + warnings enabled
Smoky cluster (x86-64 running Linux) using PGI-8.0.2 + warnings enabled
Lens cluster (x86-64 running Linux) using Pathscale-3.2 + warnings enabled
This commit was SVN r21096.
Enable the debug library suffix, which is extremely necessary on Windows. If users want to debug their own programs in Visual Studio, but linking the programs to the release version libraries of Open MPI, i.e. mixing debug and release version DLLs, that will definitely cause some errors. What we have to do is providing both debug and release versions libraries, distinguished with suffix 'd', e.g. libmpid.dll for debug version.
This commit was SVN r20828.
- This patch solely _adds_ required headers and is rather localized
The next patch (after RFC) heavily removes headers (based on script)
- ompi/communicator/communicator.h: For sources that use
ompi_mpi_comm_world, don't require them to include "mpi.h"
- ompi/debuggers/ompi_common_dll.c: mca_topo_base_comm_1_0_0_t needs
#include "ompi/mca/topo/topo.h"
- ompi/errhandler/errhandler_predefined.h:
ompi/communicator/communicator.h depends on this header file!
To prevent recursion just have fwd declarations.
#include "ompi/types.h" for fwd declarations of the main structs.
- ompi/mca/btl/btl.h: #include "opal/types.h" for ompi_ptr_t
- ompi/mca/mpool/base/mpool_base_tree.c: We use ompi_free_list_t and
ompi_rb_tree_t, so have the proper classes
- ompi/mca/op/op.h:
Op is pretty self-contained: Nobody up to now has done
#include "opal/class/opal_object.h"
- ompi/mca/osc/pt2pt/osc_pt2pt_replyreq.h:
#include "opal/types.h" for ompi_ptr_t
- ompi/mca/pml/base/base.h:
We use opal_lists
- ompi/mca/pml/dr/pml_dr_vfrag.h:
#include "opal/types.h" for ompi_ptr_t
- ompi/mca/pml/ob1/pml_ob1_hdr.h:
#include "ompi/mca/btl/btl.h" for mca_btl_base_segment_t
- opal/dss/dss_unpack.c:
#include "opal/types.h"
- opal/mca/base/base.h:
#include "opal/util/cmd_line.h" for opal_cmd_line_t
- orte/mca/oob/tcp/oob_tcp.c:
#include "opal/types.h" for opal_socklen_t
- orte/mca/oob/tcp/oob_tcp.h:
#include "opal/threads/threads.h" for opal_thread_t
- orte/mca/oob/tcp/oob_tcp_msg.c:
#include "opal/types.h"
- orte/mca/oob/tcp/oob_tcp_peer.c:
#include "opal/types.h" for opal_socklen_t
- orte/mca/oob/tcp/oob_tcp_send.c:
#include "opal/types.h"
- orte/mca/plm/base/plm_base_proxy.c:
#include "orte/util/name_fns.h" for ORTE_NAME_PRINT
- orte/mca/rml/base/rml_base_receive.c:
#include "opal/util/output.h" for OPAL_OUTPUT_VERBOSE
- orte/mca/rml/oob/rml_oob_recv.c:
#include "opal/types.h" for ompi_iov_base_ptr_t
- orte/mca/rml/oob/rml_oob_send.c:
#include "opal/types.h" for ompi_iov_base_ptr_t
- orte/runtime/orte_data_server.c
#include "opal/util/output.h" for OPAL_OUTPUT_VERBOSE
- orte/runtime/orte_globals.h:
#include "orte/util/name_fns.h" for ORTE_NAME_PRINT
Tested on Linux/x86-64
This commit was SVN r20817.
''once'' and keep the names in an argv-style array. Each time we go
to open a framework, we just scan that array rather than re-reading
all the filenames from the filesystem.
This commit was SVN r20309.
The following Trac tickets were found above:
Ticket 1271 --> https://svn.open-mpi.org/trac/ompi/ticket/1271
component name against the filename and ensure that they match.
Ignore the component if they do not.
This commit was SVN r20291.
The following Trac tickets were found above:
Ticket 1587 --> https://svn.open-mpi.org/trac/ompi/ticket/1587
1. minor modification to include two new opal MCA params:
(a) opal_profile: outputs what components were selected by each framework
currently enabled for most, but not all, frameworks
(b) opal_profile_file: name of file that contains profile info required
for modex
2. introduction of two new tools:
(a) ompi-probe: MPI process that simply calls MPI_Init/Finalize with
opal_profile set. Also reports back the rml IP address for all
interfaces on the node
(b) ompi-profiler: uses ompi-probe to create the profile_file, also
reports out a summary of what framework components are actually
being used to help with configuration options
3. modification of the grpcomm basic component to utilize the
profile file in place of the modex where possible
4. modification of orterun so it properly sees opal mca params and
handles opal_profile correctly to ensure we don't get its profile
5. similar mod to orted as for orterun
6. addition of new test that calls orte_init followed by calls to
grpcomm.barrier
This is all completely benign unless actively selected. At the moment, it only supports modex-less launch for openib-based systems. Minor mod to the TCP btl would be required to enable it as well, if people are interested. Similarly, anyone interested in enabling other BTL's for modex-less operation should let me know and I'll give you the magic details.
This seems to significantly improve scalability provided the file can be locally located on the nodes. I'm looking at an alternative means of disseminating the info (perhaps in launch message) as an option for removing that constraint.
This commit was SVN r20098.
and components from the home directory for platforms that are bad at
reading in files from home directory at scale (like Red Storm)
This commit was SVN r20069.
There is still a problem with OpenIB and threads (external to C/R functionality). It has been reported in Ticket #1539
Additionally:
* Fix a file cleanup bug in CRS Base.
* Fix a possible deadlock in the TCP ft_event function
* Add a mca_base_param_deregister() function to MCA base
* Add whole process checkpoint timers
* Add support for BTL: OpenIB, MX, Shared Memory
* Add support Mpool: rdma, sm
* Sundry bounds checking an cleanup in some scattered functions
This commit was SVN r19756.
put the name of the file that set them if they were set by file. This is of great assistance to support personnel trying to understand why a user is having pro
blems.
Coordinated with Jeff.
This commit was SVN r19111.
* add "register" function to mca_base_component_t
* converted coll:basic and paffinity:linux and paffinity:solaris to
use this function
* we'll convert the rest over time (I'll file a ticket once all
this is committed)
* add 32 bytes of "reserved" space to the end of mca_base_component_t
and mca_base_component_data_2_0_0_t to make future upgrades
[slightly] easier
* new mca_base_component_t size: 196 bytes
* new mca_base_component_data_2_0_0_t size: 36 bytes
* MCA base version bumped to v2.0
* '''We now refuse to load components that are not MCA v2.0.x'''
* all MCA frameworks versions bumped to v2.0
* be a little more explicit about version numbers in the MCA base
* add big comment in mca.h about versioning philosophy
This commit was SVN r19073.
The following Trac tickets were found above:
Ticket 1392 --> https://svn.open-mpi.org/trac/ompi/ticket/1392
Kinda found by MTT. MTT calls 'ompi_info --all --parsable' and it was livelocked and had to be killed by hand.
I'm going to push this one to Jeff to push to v1.3 since he did the original implementation and should check this code.
This commit was SVN r19014.
meat of it was commented out long ago, anyway (because of the way it
was written, it violates OPAL<->OMPI abstraction barriers); we never
ended up using the MPI keyval MCA parameter stuff. So just delete it.
This commit was SVN r18860.
Lenny and I went back and forth on whether we should simply register
another "mpi_paffinity_alone" MCA param and then try to figure out
which one was set in ompi_mpi_init, but there was difficulty in
figuring out what to do. So it seemed like the Right Thing to do was
to implement what was committed in r18770; then we could tell where
MCA parameters were set from and you could do Better Things (this is
also useful in the openib BTL, where parameters can be set either via
MCA parameter or via an INI file).
But after that was done, it seemed only a few steps further to
actually implement two new features in the MCA params area:
* Synonyms (where one MCA param name is a synonym for another)
* Allow MCA params and/or their synonyms to be marked as "deprecated"
(printing out warnings if they are used)
These features have actually long been discussed/desired, and I had
some time in airports and airplanes recently where I could work in
this stuff on a standalone laptop. So I did it. :-)
This commit introduces these two new features, and then uses them to
register mpi_paffinity_alone as a non-deprecated synonym for
opal_paffinity_alone. A few other random points in this commit:
* Add a few error checks for conditions that were not checked before
* Correct some comments in mca_base_params.h
* Add a few comments in strategic places
* ompi_info now prints additional information:
* for any MCA parameter that has synonyms, it lists all the
synonyms
* synonyms are also output as 1st-class MCA params, but with an
additional attribute indicating that they have a "parent"
* all MCA param name (both "real" or "synonym") will output an
attribute indicating whether it is deprecated or not. A synonym
is deprecated if it iself is marked as deprecated (via the
mca_base_param_regist_syn() or mca_base_param_register_syn_name()
functions) or if its "parent" MCA parameter is deprecated
This commit was SVN r18859.
The following SVN revision numbers were found above:
r18770 --> open-mpi/ompi@8efe67e08c
The following Trac tickets were found above:
Ticket 1383 --> https://svn.open-mpi.org/trac/ompi/ticket/1383
an MCA parameter's value came from. Note that the actual value of the
parameter is irrelevant. For example, if a value was specified in an
MCA parameter file that happened to have the same defaultvalue that
was specified when the parameter was registered, the returned location
will indicate that the value was set from the file.
Possible answers:
* '''MCA_BASE_PARAM_SOURCE_DEFAULT:''' no user-specified values were
found, so the default value was used
* '''MCA_BASE_PARAM_SOURCE_ENV:''' the value came from the
environment (which also means the mpirun/orterun command line!)
* '''MCA_BASE_PARAM_SOURCE_FILE:''' the value came a file (or the
Windows registry)
* '''MCA_BASE_PARAM_SOURCE_KEYVAL:''' the value came from a keyval
(can currently never happen)
* '''MCA_BASE_PARAM_SOURCE_OVERRIDE:''' the value came from an MCA
param API "set" function
This commit was SVN r18770.
bother to check to see whether they exist or not. Specifically, this
will not cause an error:
{{{
shell$ mpirun --mca btl ^does_not_exist ...
}}}
but neither will this:
{{{
shell$ mpirun --mca btl ^sm ...
}}}
(where the sm BTL ''does'' exist)
This commit was SVN r18760.
The following Trac tickets were found above:
Ticket 1365 --> https://svn.open-mpi.org/trac/ompi/ticket/1365
Make sure that if we ask for the 'none' component (which is not a 'real' component, but a component in crs/base) then we do not fail out of the box when using tools. We check for the {{{OPAL_ERR_NOT_FOUND}}} error.
Also make sure that component_open() returns {{{OPAL_ERR_NOT_FOUND}}} when it cannot find a value instead of {{{OPAL_ERROR}}} which means something quite a bit different.
C/R is working but the tools still print the warning below everytime they are ran:
{{{
--------------------------------------------------------------------------
A requested component was not found, or was unable to be opened. This
means that this component is either not installed or is unable to be
used on your system (e.g., sometimes this means that shared libraries
that the component requires are unable to be found/loaded). Note that
Open MPI stopped checking at the first component that it did not find.
Host: odin.cs.indiana.edu
Framework: crs
Component: none
--------------------------------------------------------------------------
}}}
I'll have to figure out a work around for this warning (maybe work on the {{{MCA_NULL}}} Ticket #1291).
This commit was SVN r18739.
The following SVN revision numbers were found above:
r18707 --> open-mpi/ompi@bdaaf01d8a
components. If they are not found / able to be opened, a warning will
be printed and the mca_base_component_find() will return
OPAL_ERR_NOT_FOUND. It is the upper-layer's responsibility to handle
this error appropriately.
This commit was SVN r18707.
The following Trac tickets were found above:
Ticket 1338 --> https://svn.open-mpi.org/trac/ompi/ticket/1338
Some minor changes to help facilitate debugger support so that both mpirun and yod can operate with it. Still to be completed.
This commit was SVN r18664.
Also set the 'best_priority' to the smallest 32 bit integer possible so negaive priority component can be selected if they are the highest ranking component available.
This commit was SVN r18427.
http://www.open-mpi.org/community/lists/devel/2008/04/3779.php
{{{
svn merge -r 18276:18380 https://svn.open-mpi.org/svn/ompi/tmp-public/jjh-mca-play .
}}}
Any components not in the trunk, but in one of the effected frameworks *must* be
updated. Contact the list, look at the RFC, or look at the diff for how to do this.
Sorry for the early commit of this, but I wanted to get it in today (per RFC) and
didn't know if I would have a chance later today.
This commit was SVN r18381.
by the checkpoint/restart feature. Other constraints could be enforced here,
but at the moment it is only the checkpointable constraint.
So this commit just removes this logic from non-c/r builds. If someone
wanted to add a new constraint in the future then there is a comment in
the code that directs them a bit.
This commit was SVN r17447.
was brought in. This supercedes the GLOBL patch that we had been using
with Libtool 2.1a versions prior to the lt_dladvise code. Autogen
tries to figure out which version you're on, so either will now work with
the trunk.
This commit was SVN r15903.
Remove the matching logic out of dynamic path into an
extra function. Add the corresponing check to the static
component path.
This commit was SVN r15458.
There are several interesting things:
1. less NFS traffic [as we potentially access less files]
2. faster loading time [in case the user tune it's execution environment]
3. (1) + (2) -> faster startup time [at least everything which do not depend on the network]
4. MX bug will go away if the pml is specified.
5. No useless BTL will be opened, which will solve few others issues.
This commit was SVN r15402.
* Remove the 'opal_mca_base_param_use_amca_sets' global variable
* Harness the fact that you can (read should) call the cmd_line functions
before initializing opal_init_util(). This pushes the MCA/GMCA/AMCA
command line options into the environment before OPAL inits and starts
to use these values. By putting the cmd_line parse before opal_init_util
in orterun and orted we only parse the *MCA parameter files once, and
correctly (alleviating the need to 'recache' the files on init.)
* Small bits of cleanup.
This commit was SVN r15219.
* Require Autoconf 2.60 or higher and remove some cruft
required for AC 2.59 or the AC 2.59 / AC 2.60 mix
* Remove a bunch of now unnecessary AC_SUBST calls
* Use the libtool-provided variables for the -I and
library to use when compiling against ltdl
Fixes trac:1000
This commit was SVN r14652.
The following Trac tickets were found above:
Ticket 1000 --> https://svn.open-mpi.org/trac/ompi/ticket/1000
Protect the free and strdup values for replacing keyval pairs just as we do
below in the files for new keyval pairs.
In basic testing this seems to make everything work as it should again.
This commit was SVN r14460.
The following Trac tickets were found above:
Ticket 1002 --> https://svn.open-mpi.org/trac/ompi/ticket/1002
finally brings in functionality that is already on the 1.2 branch, and
was developed and tested in the v1.2ofed branch (and other places).
Short version of new features:
* Support for ibv_fork_init()
* Automatically fill in the openib BTL bandwidth value by
querying the HCA port
* Installdirs functionality
* Fixes to always use -I in the Fortran wrapper compilers (#924)
* Gleb's mpool updates
* Remove some kruft in btl/openib/configure.m4, therefore
fixing the harmless warnings noted in #665
* Bunches of updates to the Linux RPM spec file
I.e., effectively the same thing that r14411 brought to the v1.2
branch.
Also effectively brought in r14432 and r14433 (some fixes on top of
the original r14411 commit to v1.2). Still need to bring in the moral
equivalent of r14445 after this commit (fixes to installdirs).
This commit was SVN r14449.
The following SVN revision numbers were found above:
r14411 --> open-mpi/ompi@83b31314ae
r14432 --> open-mpi/ompi@a48f160595
r14433 --> open-mpi/ompi@68f346d2bc
r14445 --> open-mpi/ompi@13d366b827
This merge adds Checkpoint/Restart support to Open MPI. The initial
frameworks and components support a LAM/MPI-like implementation.
This commit follows the risk assessment presented to the Open MPI core
development group on Feb. 22, 2007.
This commit closes trac:158
More details to follow.
This commit was SVN r14051.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r13912
The following Trac tickets were found above:
Ticket 158 --> https://svn.open-mpi.org/trac/ompi/ticket/158
- mca_base_param_file_prefix
(Default: NULL)
This is the fullname of the "-am" mpirun option. Used to specify a ':'
separated list of AMCA parameter set files.
- mca_base_param_file_path
(Default: $SYSCONFDIR/amca-param-sets/:$CWD)
The path to search for AMCA files with relative paths. A warning will be
printed if the AMCA file cannot be found.
* Added a new function "mca_base_param_recache_files" the re-reads the file
configurations. This is used internally to help bootstrap the MCA system.
* Added a new orterun/mpirun command line option '-am' that aliases for the
mca_base_param_file_prefix MCA parameter
* Exposed the opal_path_access function as it is generally useful in other
places in the code.
* New function "opal_cmd_line_make_opt_mca" which will allow you to append a
new command line option with MCA parameter identifiers to set at the same
time. Previously this could only be done at command line declaration time.
* Added a new directory under the $pkgdatadir named "amca-param-sets" where all
the 'shipped with' Open MPI AMCA parameter sets are placed. This is the first
place to search for AMCA sets with relative paths.
* An example.conf AMCA parameter set file is located in
contrib/amca-param-sets/.
* Jeff Squyres contributed an OpenIB AMCA set for benchmarking.
Note: You will need to autogen with this commit as it adds a configure param.
Sorry :(
This commit was SVN r13867.
The same treatement will happens on all sub-projects. The .h files
have to be C++ compatibles and all symbols with an external visibility
have to get the {PROJECT}_DECLSPEC in front of the prototype.
This commit was SVN r11340.
range of OS friendly path management functions, such as opal_basename
opal_dirname. They should always be used instead of basename and
dirname. There are several functions which allow us to create paths
that are compatible with the OS.
The OPAL_ENV_SEP define should be used (instead of ':') when a env
variable is splitted.
This commit was SVN r11336.
