- by default allow to register maximum possible (i.e 2 * total_memory)
memory. This beheviour can be turned off using mca parameter
"btl_openib_allow_max_memory_registration"
- In fallback case, use device specific parameters to calulate
memory limit.
while cleaning up after receiving a zero byte on the connect socket
(localyy started connection), while another was trying to accept a
new connection from the same peer. Create a zero-timed event and
delocalize the accept into a timer_event.
Add support for registering an error callback, that can be used when a
connection is discovered as failed during the initialization process.
was quite subtle, and only happened on the process with the smallest
guid (as this process will tear down the connection created locally and
replace it with the result of accept). If multiple threads are active in
the system, the deadlock occurs during the recv event deletion as one
thread will hold the recv event lock of the endpoint and try to access
the TCP event base lock, while the other thread will hold the TCP event
base lock while trying to access the recv event lock (in case data is
available on the socket).
The proposed solution let the event callback fail to process the data,
preventing the deadlock and allowing the other thread to always complete
it's job. As the event is not execute the same triggered will trigger
again at the next opportunity, so this solution introduce a minimal
delay in the connection establishement.
This commit represents the conversion of the usnic BTL from verbs to
libfabric.
For the moment, libfabric is embedded in Open MPI (currently in the
usnic BTL). This is because the libfabric API is still changing, and
also has not yet been released. Ultimately, this embedded copy of
libfabric will likely disappear and the usnic BTL will rely on an
external installation of libfabric.
New configure options:
* --with-libfabric: will cause configure to fail if libfabric support
cannot be built
* --without-libfabric: will prevent libfabric support from being built
* --with-libfabric=DIR: use an external libfabric installation
* --with-libfabric-libdir=LIBDIR: when paired with --with-libfabric=DIR,
use LIBDIR for the libfabric installation library dir
The --with-libnl3[-libdir] arguments are now gone.
If OPAL_MODEX_RECV() returns OPAL_ERR_NOT_FOUND, the peer didn't
send any Portals4 BTL info. This is not a fatal error. Instead of
disqualifying the Portals4 BTL just ignore that peer.
@jsquyres reported this in #194.
inserted in the ompi_proc_list as soon as it is created and it
is removed only upon the call to the destructor. In ompi_proc_finalize
we loop over all procs in ompi_proc_finalize and release them once.
However, as a proc is not removed from this list right away, we
decrease the ref count for each proc until it reach zero and the
proc is finally removed. Thus, we cannot clean the BML/BTL after
the call the ompi_proc_finalize.
A quick fix is to delay the call to ompi_proc_finalize until all
other frameworks have been finalized, and then the behavior
depicted above will give the expected outcome.
value NULL for the descriptor
The send inline optimization uses the btl_sendi function to achieve
lower latency and higher message rates. The problem is the btl_sendi
function was allowed to return a descriptor to the caller. This is fine
for some paths but not ok for the send inline optimization. To fix
this the btl now must be able to handle descriptor = NULL.
structure
This structure member was originally used to specify the remote segment
for an RDMA operation. Since the new btl interface no longer uses
desriptors for RDMA this member no longer has a purpose. In addition
to removing these members the local segment information has been
renamed to des_segments/des_segment_count.
The old BTL interface provided support for RDMA through the use of
the btl_prepare_src and btl_prepare_dst functions. These functions were
expected to prepare as much of the user buffer as possible for the RDMA
operation and return a descriptor. The descriptor contained segment
information on the prepared region. The btl user could then pass the
RDMA segment information to a remote peer. Once the peer received that
information it then packed it into a similar descriptor on the other
side that could then be passed into a single btl_put or btl_get
operation.
Changes:
- Removed the btl_prepare_dst function. This reflects the fact that
RDMA operations no longer depend on "prepared" descriptors.
- Removed the btl_seg_size member. There is no need to btl's to
subclass the mca_btl_base_segment_t class anymore.
...
Add more
using knem
It is valid to modify the remote segment that will be used with the
btl put/get operations as long as the resulting address range falls in
the originally prepared segment. Vader should have been calculating the
offset of the remote address in the registered region. This commit
fixes this issue.
We recognize that this means other users of OPAL will need to "wrap" the opal_process_name_t if they desire to abstract it in some fashion. This is regrettable, and we are looking at possible alternatives that might mitigate that requirement. Meantime, however, we have to put the needs of the OMPI community first, and are taking this step to restore hetero and SPARC support.
There were mistakes in the Makefiles for the ugni btl and
mca/common/ugni that prevented the ugni btl from being
used unless one happened to set the --disable-dlopen option
on the config line.
This commit fixes this problem.
This enables IBM's software iWARP provider. With this driver you can
run iWARP/RDMA over any ethernet NIC. Useful for testing OMPI RDMA
logic without requiring an expensive RDMA adapter/infrastructure.
The Soft iWARP code is at: https://www.gitorious.org/softiwarp
At some point we added a sanity check to the btl base to ensure that
the btl flags match the available functions (this prevents user's from
specifying get or put when no function exists). This check was
disabling get for the sm btl since at the time of the check there is
no btl_get function. The simplest fix is to set a dummy value to btl_get
that will be overwritten with the proper value on btl initialization.
Closes#239.
If there are no usnic BTL modules, then just avoid sending any modex
message at all (other BTLs do this; it's safe to do).
The change is smaller than it looks: I added a "if 0 ==..." check at
the top to return immediately if there are no BTL modules. Then I
removed some now-unnecessary conditionals and un-indented as
appropriate.
Fixes#248
These two macros set the prefix for the OPAL and ORTE libraries,
respectively. Specifically, the OPAL library will be named
libPREFIXopen-pal.la and the ORTE library will be named
libPREFIXopen-rte.la.
These macros must be called, even if the prefix argument is empty.
The intent is that Open MPI will call these macros with an empty
prefix, but other projects (such as ORCM) will call these macros with
a non-empty prefix. For example, ORCM libraries can be named
liborcm-open-pal.la and liborcm-open-rte.la.
This scheme is necessary to allow running Open MPI applications under
systems that use their own versions of ORTE and OPAL. For example,
when running MPI applications under ORTE, if the ORTE and OPAL
libraries between OMPI and ORCM are not identical (which, because they
are released at different times, are likely to be different), we need
to ensure that the OMPI applications link against their ORTE and OPAL
libraries, but the ORCM executables link against their ORTE and OPAL
libraries.
This commit makes the folowing changes:
- Add support for the knem single-copy mechanism. Initially vader will only
support the synchronous copy mode. Asynchronous copy support may be added
int the future.
- Improve Linux cross memory attach (CMA) when using restrictive ptrace
settings. This will allow Open MPI to use CMA without modifying the system
settings to support ptrace attach (see /etc/sysctl.d/10-ptrace.conf).
- Allow runtime selection of the single copy mechanism. The default behavior
is to use the best available. The priority list of single-copy mehanisms is
as follows: xpmem, cma, and knem.
- Allow disabling support for kernel-assisted single copy.
- Some tuning and bug fixes.
Restore the functionality to error out (and show a helpful message) if
knem support is requested by is either not compiled in or cannot be
activated.
Thanks to Gus Correa for bringing the matter to our attention.
Somehow, this MCA param was accidentally dropped after v1.6.5. Thanks
to Gus Correa for bringing this matter to our attention.
Also moving some MCA params down from level 9 to levels 4/5.
of preregistered buffers
Before this change eager gets we retried on each progress loop. This commit
modifies the protocol to only retry eager gets when another eager get has
completed. This commit also cleans up some callback code that is no longer
needed.
The GNI_RDMAMODE_FENCE bit was a left over from
async progress work that is not needed at this point
in the gni BTL. Removing the bit also allows
for the removal of the GNI_CDM_MODE_BTE_SINGLE_CHANNEL
bit from the GNI_CdmCreate call.
This commit adds initial ugni thread safety support.
With this commit, sun thread tests (excepting MPI-2 RMA)
pass with various process counts and threads/process.
Also osu_latency_mt passes.
Properly setup the opal_process_info structure early in the initialization procedure. Define the local hostname right at the beginning of opal_init so all parts of opal can use it. Overlay that during orte_init as the user may choose to remove fqdn and strip prefixes during that time. Setup the job_session_dir and other such info immediately when it becomes available during orte_init.
This is a large update that does the following:
- Only allocate fast boxes for a peer if a send count threshold
has been reached (default: 16). This will greatly reduce the memory
usage with large numbers of local peers.
- Improve performance by limiting the number of fast boxes that can
be allocated per peer (default: 32). This will reduce the amount
of time spent polling for fast box messages.
- Provide new MCA variables to configure the size, maximum count,
and send count thresholds for fast boxes allocations.
- Updated buffer design to increase the range of message sizes that
can be sent with a fast box.
- Add thread protection around fast box allocation (locks). When
spin locks are available this should be updated to use spin locks.
- Various fixes and cleanup.
This commit was SVN r32774.
The use of restrict in the return type qualifier for mca_btl_vader_reserve_fbox
is being ignored by gnu compiler. for newer gcc, one sees this warning only
with -Wignored-qualifiers set, but for older variants of gcc it was reported
that numerous warning messages about this ignored qualifier were being
generated as vader is being compiled.
The warning reported by gcc is
btl_vader_fbox.h:53:47: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
static inline mca_btl_vader_fbox_t * restrict mca_btl_vader_reserve_fbox (struct mca_btl_base_endpoint_t *ep, const size_t size)
This commit was SVN r32714.
