- use the OPAL functions for PATH and environment variables
- make all headers C++ friendly
- no unamed structures
- no implicit cast.
Plus a full implementation for the orte_wait functions.
This commit was SVN r11347.
different macros, one for each project. Therefore, now we have OPAL_DECLSPEC,
ORTE_DECLSPEC and OMPI_DECLSPEC. Please use them based on the sub-project.
This commit was SVN r11270.
Other changes:
1. Remove the old xcpu components as they are not functional.
2. Fix a "bug" in orterun whereby we called dump_aborted_procs even when we normally terminated. There is still some kind of bug in this procedure, however, as we appear to be calling the orterun job_state_callback function every time a process terminates (instead of only once when they have all terminated). I'll continue digging into that one.
This will require an autogen/configure, I'm afraid.
This commit was SVN r11228.
Clean up the remainder of the size_t references in the runtime itself. Convert to orte_std_cntr_t wherever it makes sense (only avoid those places where the actual memory size is referenced).
Remove the obsolete oob barrier function (we actually obsoleted it a long time ago - just never bothered to clean it up).
I have done my best to go through all the components and catch everything, even if I couldn't test compile them since I wasn't on that type of system. Still, I cannot guarantee that problems won't show up when you test this on specific systems. Usually, these will just show as "warning: comparison between signed and unsigned" notes which are easily fixed (just change a size_t to orte_std_cntr_t).
In some places, people didn't use size_t, but instead used some other variant (e.g., I found several places with uint32_t). I tried to catch all of them, but...
Once we get all the instances caught and fixed, this should once and for all resolve many of the heterogeneity problems.
This commit was SVN r11204.
correctly with MPI_Comm_spawn.
The problem wiht MPI_Comm_spawn was that the 'parent' process was
rmgr.create'ing and then rmgr.launch'ing the children via the rmgr proxy
component. The HNP saw these commands and processed them normally, but
since we never went through the HNP's rmgr (urm component) spawn()
logic the triggers and key/value pairs were never created. So the
children were launched correctly, but since the HNP did not
have any triggers setup, never triggered the xcast for the
children to finish orte_init().
This fix puts the trigger and key/value pair initialization in
rmgr_urm_spawn() for the 'mpirun a.out' case, *and* in the
rmgr_base_unpack routine that deals with the creation of the
job for the child as requested by the proxy component. This
will allow the triggers to be registered for the proxy's request
which only happens during MPI_Comm_spawn*
Small change for a lot of debugging. Notice that his reverts r11037
to its previous version, and adds a newline to handle the spawn
cases.
This commit was SVN r11046.
The following SVN revision numbers were found above:
r11037 --> open-mpi/ompi@5813fb7d2a
This commit will apply cleanly to the v1.1 branch, and should
be moved over once I get someone to verify it.
The problem is outlined in the bug. The fix was to move the
setting of the app context index (idx) before we put it in the
GPR so that it is propogated to the gpr.
The reason this hasn't bitten us before is because we init
app->idx to 0, which is true most of the time. Except that is
when MPI_Comm_spawn_multiple in which we put in more than
one app context, thus care about correct indexing.
This was causing down the line memory corruption by overrunning
the mapping array. This commit also puts in a check to make
sure that we error out if we ever try to do that again.
This commit was SVN r10380.
1. Changed the RMGR and PLS APIs to add "signal_job" and "signal_proc" entry points. Only the "signal_job" entries are implemented - none of the components have implementations for "signal_proc" at this time. Thus, you can signal all of the procs in a job, but cannot currently signal only one specific proc.
2. Implemented those new API functions in all components except xgrid (Brian will do so very soon). Only the rsh/ssh and fork modules have been tested, however, and only under OS-X.
3. Added signal traps and callback functions for SIGUSR1/2 to orterun/mpirun that catch those signals and call the appropriate commands to propagate them out to all processes in the job.
4. Added a new test directory under the orte branch to (eventually) hold unit and system level tests for just the run-time. Since our test branch of the repository is under restricted access, people working on the RTE were continually developing their own system-level tests - thus making it hard to help diagnose problems. I have moved the more commonly-used functions here, and added one specifically for testing the SIGUSR1/2 functionality.
I will be contacting people directly to seek help with testing the changes on more environments. Other than compile issues, you should see absolutely no change in behavior on any of your systems - this additional functionality is transparent to anyone who does not issue a SIGUSR1/2 to mpirun.
Ralph
This commit was SVN r10258.
for the type to be packed / unpacked when dealing with sized types (like
size_t) so that the dss_unpack code to deal with types of different sizes is
activated. Necessary for proper 32/64 interoperability.
This commit was SVN r9475.
argv[0] and the cwd on the target node (i.e., the node where the
executable will be running in all systems except BProc, where the
searches are run on the node where orterun is invoked).
- fork pls now does cwd and argv[0] search in orted
- bproc pls does cwd and argv[0] search in orterun
- cwd behavior slightly different:
- if user specifies a -wdir to orterun, we chdir() to there; if we
can't for some reason, abort
- if user does not specify a -wdir, try to chdir() to the dir where
orterun was invoked. If we can't for some reason (e.g., it
doesn't exist on the target node), then try to chdir($HOME). If
we can't do that, then just live with whatever default directory
we were put in.
This commit was SVN r9068.
- move files out of toplevel include/ and etc/, moving it into the
sub-projects
- rather than including config headers with <project>/include,
have them as <project>
- require all headers to be included with a project prefix, with
the exception of the config headers ({opal,orte,ompi}_config.h
mpi.h, and mpif.h)
This commit was SVN r8985.
component/base Makefile.am files, reducing the time configure spends
stamping out Makefiles at the end
* Install base_impl.h file when devel-headers are being installed
This commit was SVN r8200.
command:
svn merge -r 7567:7663 https://svn.open-mpi.org/svn/ompi/tmp/jjhursey-rmaps .
(where "." is a trunk checkout)
The logs from this branch are much more descriptive than I will put
here (including a *really* long description from last night). Here's
the short version:
- fixed some broken implementations in ras and rmaps
- "orterun --host ..." now works and has clearly defined semantics
(this was the impetus for the branch and all these fixes -- LANL had
a requirement for --host to work for 1.0)
- there is still a little bit of cleanup left to do post-1.0 (we got
correct functionality for 1.0 -- we did not fix bad implementations
that still "work")
- rds/hostfile and ras/hostfile handshaking
- singleton node segment assignments in stage1
- remove the default hostfile (no need for it anymore with the
localhost ras component)
- clean up pls components to avoid duplicate ras mapping queries
- [possible] -bynode/-byslot being specific to a single app context
This commit was SVN r7664.
caller to specify a subset of the state variables that it can can subscribe to.
This is specified with one of three special flags defined in rmgr/rmgr_types.h
This is useful when we only care about a subset of the state changes, such as
in orted which only needs to know when a job has terminated or aborted.
This commit was SVN r7356.
AM_INIT_AUTOMAKE, instead of the deprecated version.
* Work around dumbness in modern AC_INIT that requires the version
number to be set at autoconf time (instead of at configure time, as
it was before). Set the version number, minus the subversion r number,
at autoconf time. Override the internal variables to include the r
number (if needed) at configure time. Basically, the right thing
should always happen. The only place it might not is the version
reported as part of configure --help will not have an r number.
* Since AM_INIT_AUTOMAKE taks a list of options, no need to specify
them in all the Makefile.am files.
* Addes support for subdir-objects, meaning that object files are put
in the directory containing source files, even if the Makefile.am is
in another directory. This should start making it feasible to
reduce the number of Makefile.am files we have in the tree, which
will greatly reduce the time to run autogen and configure.
This commit was SVN r7211.
app_context:
mpirun -np 2 -prefix /path/to/ompi/on/machineA ./exec1 : \
-np 2 -prefix /path/to/ompi/on/machineB ./exec2
- Allow with -mca pls_rsh_assume_same_shell 0, the checking for the
SHELL-variable on the actual node (currently 1st node).
Sets the prefix, PATH and LD_LIBRARY_PATH for bash/ksh and
csh/tcsh.
This commit was SVN r7195.
add a -I to find the included ltdl.h (vs. a system-installed ltdl.h)
- Clean up kruft in a bunch of Makefile.am's to remove now-unnecessary
AM_CPPFLAGS settings to get static-components.h for each framework
- Move the component_repository API functions out of opal/mca/base/base.h
and into opal/mca/base/mca_base_component_repository.h in order to
decrease unnecessary dependencies (e.g., before this, almost
everything in the tree depended on ltdl.h, which is unnecessary --
only a small number of files really need ltdl.h)
This commit was SVN r7127.
Here's the huge registry check-in you've all been waiting for with baited breath. The revised version sends a single message to all processes at the various stage gates, thus making the startup much more scalable. I could provide you with all the tawdry details, but won't for now - you are welcome to ask, though, and I'll merrily bore your ears to tears.
In addition, the commit contains the following:
1. set the ignore properties on ompi/debuggers and orte/mca/pls/poe
2. Added simplified subscribe and put functions to the registry's API. I have also converted all of the ompi functions that registered subscriptions to the new API, and caught their associated put's as well.
In a follow-on commit, I'll be adding support for George's hetero arch registry subscription (wanted to get this one in first).
This commit was SVN r7118.
- change the framework opens to [mostly] use the new MCA param API
- properly pass in framework debug output streams to the
mca_base_component_open() function
This commit was SVN r6888.
* Add base to memory framework so that we can do something sane with
ompi_info
* Updated ompi_info to print components for memory framework and
show whether we have memory hooks active or not.
This commit was SVN r6861.
This required a little fiddling with a number of areas. Biggest problem was that it uncovered a potential for an infinite loop to be created in the registry. If a callback function modified the registry, the registry checked the triggers to see if anything had fired. Well, if the original callback was due to a trigger firing, that condition hadn't changed - so the trigger fired again....which caused the callback to be called, which modified the registry, which checked the triggers, etc. etc.
Triggers are now checked and then "flagged" as being "in process" so that the registry will NOT recheck that trigger until all callbacks have been processed. Tried doing this with subscriptions as well, but that caused a problem - when we release processes from a stagegate, they (at the moment) immediately place data on the registry that should cause a subscription to fire. Unfortunately, the system will just hang if that subscription doesn't get processed. So, I have left the subscription system alone - any callback function that modifies the registry in a fashion that will fire a subscription will indeed fire that subscription. We'll have to see if this causes problems - it shouldn't, but a careless user could lock things up if the callback generates a callback to itself.
Also fixed the code that placed a process' RML contact info on the registry to eliminate the leading '/' from the string.
This commit was SVN r6684.
1. Modify the registry to eliminate redundant data copying for startup messages.
2. Revise the subscription/trigger system to avoid redundant storage of triggers and subscriptions. This dramatically reduces the search time when a registry action occurs - to illustrate the point, there are now only a handful of triggers on the system for each job. Before, there were a handful of triggers for each PROCESS in the job, all of which had to be checked every time something happened on the registry. This is much, much faster now.
3. Update all subscriptions to the new format. There are now "named" subscriptions - this allows you to "name" a subscription that all the processes will be using. The first one to hit the registry actually defines the subscription. From then on, any subsequent "subscribes" to the same name just cause that process to "attach" to the existing subscription. This keeps the number of subscriptions being tracked by the registry to a minimum, while ensuring that each process still gets notified.
4. Do the same for triggers.
Also fixed a duplicate subscription problem that was causing people to receive data equal to the number of processes times the data they should have received from a trigger/subscription. Sorry about that... :-( ...but it's all better now!
Uncovered a situation where the modex data seems to be getting entered on the registry a second time - the latter time coming after the compound command has been "fired", thereby causing all the subscriptions to fire. Asked Tim and Jeff to look into this.
Second phase of the changes will involve modifying the xcast system so that the same message gets sent to all processes. This will further reduce the message traffic, and - once we have a true "broadcast" version of xcast - really speed things up and improve scalability.
This commit was SVN r6542.
frameworks, and components without configure scripts instead of
hard-coded shell variables (for projects and frameworks) and
shell variable building (for components).
* Add 3rd category of component configuration (in addition to configure
scripts and no-configured components): configure.m4 components. These
components can only be built as part of OMPI (like no-configure), but
can provide an m4 file that is run as part of the main configure
script. These macros can set whether the component should be built,
along with just about any other configuration wanted. More care must
be taken compared to configure components, as doing things like setting
variables or calling AC_MSG_ERROR now affects the top-level configure
script (so calling AC_MSG_ERROR if your component can't configure
probably isn't what you want)
* Added support to autogen.sh for the configure.m4-style components,
as well as building up the m4_define lists ompi_mca.m4 now expects
* Updated a number of macros to be more config.cache friendly (both
so that config.cache can be used and so the test can be quickly
run multiple times in the same configrue script):
- ompi_config_asm
- c_weak_symbols
- c_get_alignment
* Added new macros to be shared when configuring components:
- ompi_objc.m4 (this actually provides AC_PROG_OBJC - don't ask...)
- ompi_check_xgrid
- ompi_check_tm
- ompi_check_bproc
* Updated a number of components to use configure.m4 instead of
configure.stub
- btl portals
- io romio
- tm ras and pls
- bjs, lsf_bproc ras and bproc_seed pls
- xgrid ras and pls
- null iof (used by tm)
This commit was SVN r6412.
* rename ompi_basename to opal_basename
* rename ompi bitop functions to opal
* rename ompi_cmd_line to opal_cmd_line
* rename ompi_sizet2int to opal_sizet2int
* rename orte_daemon_init to opal_daemon_init
* rename ompi_few to opal_few
This commit was SVN r6330.
