Over the course of time, usage of static ports got corrupted in several places, the "parent" info got incorrectly reset, etc. So correct all that and get the regex-based wireup going again.
Also, don't pass node lists if static ports aren't enabled - they are of no value to the orted and just create the possibility of overly-long cmd lines.
This commit was SVN r24860.
The problem was tracked to use of the grpcomm.onesided_barrier to control daemon/mpirun termination. This relied on messaging -and- required that the program counter jump from the errmgr back to grpcomm. On rare occasions, this jump did not occur, causing mpirun to hang.
This patch looks more invasive than it is - most of the affected files simply had one or two lines removed. The essence of the change is:
* pulled the job_complete and quit routines out of orterun and orted_main and put them in a common place
* modified the errmgr to directly call the new routines when termination is detected
* removed the grpcomm.onesided_barrier and its associated RML tag
* add a new "num_routes" API to the routed framework that reports back the number of dependent routes. When route_lost is called, the daemon's list of "children" is checked and adjusted if that route went to a "leaf" in the routing tree
* use connection termination between daemons to track rollup of the daemon tree. Daemons and HNP now terminate once num_routes returns zero
Also picked up in this commit is the addition of a new bool flag to the app_context struct, and increasing the job_control field from 8 to 16 bits. Both trivial.
This commit was SVN r23429.
(OMPI_ERR_* = OPAL_SOS_GET_ERR_CODE(ret)), since the return value could be a
SOS-encoded error. The OPAL_SOS_GET_ERR_CODE() takes in a SOS error and returns
back the native error code.
* Since OPAL_SUCCESS is preserved by SOS, also change all calls of the form
(OPAL_ERROR == ret) to (OPAL_SUCCESS != ret). We thus avoid having to
decode 'ret' to get the native error code.
This commit was SVN r23162.
Remove all architecture references from ORTE and put them back in the modex using modex_send/recv calls.
Hetero operations are now fully supported again. Comm_spawn now works up to the point where it segfaults due to an error in the CID code - which now allows Edgar to dig further! :-)
This commit was SVN r21655.
Add a new tm ess module that exploits this capability.
Update the various plm modules to enable it - just a minor change reflecting an added param to a plm base function.
Additional fixes included:
1. remove an erroneous cleanup of session directories in the tool finalize procedure - tools don't create session directories to begin with!
2. fix a duplicate free when attempting to execute a non-existent app
3. cleanup an typo in the comm utilities
4. fix comm_spawn - was perturbed by the changes in pack/unpack of orte_job_t to properly support orte-ps
Been tested on slurm and tm machines, using all tests in orte/test/mpi. May run into issue with command line length on large jobs due to inclusion of node info to support static ports - will fix this next with addition of regexp generator to compress that info.
This commit was SVN r21248.
This causes the orteds in the routing tree to remain alive until all termination "acks" from orteds below them have passed through. Thus, if we use static ports, we no longer require a direct orted-to-mpirun connection.
Also modify the binomial routed module so it conforms to what all the other routed modules do and have all messages pass along the routing tree instead of short-circuiting between orteds. This further reduces the number of ports being opened on backend nodes.
This commit was SVN r21203.
- Delete unnecessary header files using
contrib/check_unnecessary_headers.sh after applying
patches, that include headers, being "lost" due to
inclusion in one of the now deleted headers...
In total 817 files are touched.
In ompi/mpi/c/ header files are moved up into the actual c-file,
where necessary (these are the only additional #include),
otherwise it is only deletions of #include (apart from the above
additions required due to notifier...)
- To get different MCAs (OpenIB, TM, ALPS), an earlier version was
successfully compiled (yesterday) on:
Linux locally using intel-11, gcc-4.3.2 and gcc-SVN + warnings enabled
Smoky cluster (x86-64 running Linux) using PGI-8.0.2 + warnings enabled
Lens cluster (x86-64 running Linux) using Pathscale-3.2 + warnings enabled
This commit was SVN r21096.
several header files (previously included by header-files)
now have to be moved "upward".
This is mainly system headers such as string.h, stdio.h and for
networking, but also some orte headers.
This commit was SVN r21095.
Adapt orte_process_info to orte_proc_info, and
change orte_proc_info() to orte_proc_info_init().
- Compiled on linux-x86-64
- Discussed with Ralph
This commit was SVN r20739.
Often, orte/util/show_help.h is included, although no functionality
is required -- instead, most often opal_output.h, or
orte/mca/rml/rml_types.h
Please see orte_show_help_replacement.sh commited next.
- Local compilation (Linux/x86_64) w/ -Wimplicit-function-declaration
actually showed two *missing* #include "orte/util/show_help.h"
in orte/mca/odls/base/odls_base_default_fns.c and
in orte/tools/orte-top/orte-top.c
Manually added these.
Let's have MTT the last word.
This commit was SVN r20557.
The prior ompi_proc_t structure had a uint8_t flag field in it, where only one
bit was used to flag that a proc was "local". In that context, "local" was
constrained to mean "local to this node".
This commit provides a greater degree of granularity on the term "local", to include tests
to see if the proc is on the same socket, PC board, node, switch, CU (computing
unit), and cluster.
Add #define's to designate which bits stand for which local condition. This
was added to the OPAL layer to avoid conflicting with the proposed movement of
the BTLs. To make it easier to use, a set of macros have been defined - e.g.,
OPAL_PROC_ON_LOCAL_SOCKET - that test the specific bit. These can be used in
the code base to clearly indicate which sense of locality is being considered.
All locations in the code base that looked at the current proc_t field have
been changed to use the new macros.
Also modify the orte_ess modules so that each returns a uint8_t (to match the
ompi_proc_t field) that contains a complete description of the locality of this
proc. Obviously, not all environments will be capable of providing such detailed
info. Thus, getting a "false" from a test for "on_local_socket" may simply
indicate a lack of knowledge.
This commit was SVN r20496.
y combination of comma-separated values and ranges. Daemons will use the first port in the range, MPI procs will use the other ports in the range assuming that they know their node rank in time and enough ports were specified.
NOTE: this capability only works under specific conditions. I will outline more about this in a note to devel as the remainder of the implementation progresses. For now, the only environment where this works is slurm. The linear routed module has also been adjusted to work with static ports so that all messaging flows strictly through the topology, including the initial daemon callback - thus limiting the number of sockets opened by mpirun.
This commit was SVN r20390.
Consolidate the nid/pid lookup code with the rest of the nid/pid code so that changes are easier to track. Add the ability to send cluster profile info as part of the nidmap. Cleanup the setup and teardown of the new global nidmap and pidmap objects.
This commit was SVN r20219.
This commit does that by ensuring that daemons retain knowledge of proc location for all procs in their job family. It required a minor change to the ESS API to allow the daemons to update their pidmaps as data was received. In addition, the routed modules have been updated to take advantage of the newly available info, and the encode/decode pidmap utilities have been updated to communicate the required info in the launch message.
This commit was SVN r20022.
1. remove direct routed module (hooray!)
2. add radix tree routed module (binomial remains default)
3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess
4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support
5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability
6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon)
Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm.
This will require an autogen...
This commit was SVN r19866.
1. repair of the linear and direct routed modules
2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI
3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature
4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes.
Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB
5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept.
Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules.
6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch
7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch
8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies
9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc.
10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon
There is still more cleanup to be done for efficiency, but this at least works.
Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn.
Fixes ticket #1256
This commit was SVN r18804.
Update the ESS API so we can update the stored arch's should the modex include that info. Update ompi/proc to check/set the arch for remote procs, and add that function call to mpi_init right after the modex is done.
Setup to allow other grpcomm modules to decide whether or not to add the arch to the modex, and to detect if other entries have been made. If not, then the modex can just fall through. Begin setting up some logic in the "basic" module to handle different arch situations.
For now, default to the "bad" module so we will work in all situations, even though we may be sending around more info than we really require.
This fixes ticket #1340
This commit was SVN r18673.
Some minor changes to help facilitate debugger support so that both mpirun and yod can operate with it. Still to be completed.
This commit was SVN r18664.
After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach.
I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive.
This commit was SVN r18619.
such, the commit message back to the master SVN repository is fairly
long.
= ORTE Job-Level Output Messages =
Add two new interfaces that should be used for all new code throughout
the ORTE and OMPI layers (we already make the search-and-replace on
the existing ORTE / OMPI layers):
* orte_output(): (and corresponding friends ORTE_OUTPUT,
orte_output_verbose, etc.) This function sends the output directly
to the HNP for processing as part of a job-specific output
channel. It supports all the same outputs as opal_output()
(syslog, file, stdout, stderr), but for stdout/stderr, the output
is sent to the HNP for processing and output. More on this below.
* orte_show_help(): This function is a drop-in-replacement for
opal_show_help(), with two differences in functionality:
1. the rendered text help message output is sent to the HNP for
display (rather than outputting directly into the process' stderr
stream)
1. the HNP detects duplicate help messages and does not display them
(so that you don't see the same error message N times, once from
each of your N MPI processes); instead, it counts "new" instances
of the help message and displays a message every ~5 seconds when
there are new ones ("I got X new copies of the help message...")
opal_show_help and opal_output still exist, but they only output in
the current process. The intent for the new orte_* functions is that
they can apply job-level intelligence to the output. As such, we
recommend that all new ORTE and OMPI code use the new orte_*
functions, not thei opal_* functions.
=== New code ===
For ORTE and OMPI programmers, here's what you need to do differently
in new code:
* Do not include opal/util/show_help.h or opal/util/output.h.
Instead, include orte/util/output.h (this one header file has
declarations for both the orte_output() series of functions and
orte_show_help()).
* Effectively s/opal_output/orte_output/gi throughout your code.
Note that orte_output_open() takes a slightly different argument
list (as a way to pass data to the filtering stream -- see below),
so you if explicitly call opal_output_open(), you'll need to
slightly adapt to the new signature of orte_output_open().
* Literally s/opal_show_help/orte_show_help/. The function signature
is identical.
=== Notes ===
* orte_output'ing to stream 0 will do similar to what
opal_output'ing did, so leaving a hard-coded "0" as the first
argument is safe.
* For systems that do not use ORTE's RML or the HNP, the effect of
orte_output_* and orte_show_help will be identical to their opal
counterparts (the additional information passed to
orte_output_open() will be lost!). Indeed, the orte_* functions
simply become trivial wrappers to their opal_* counterparts. Note
that we have not tested this; the code is simple but it is quite
possible that we mucked something up.
= Filter Framework =
Messages sent view the new orte_* functions described above and
messages output via the IOF on the HNP will now optionally be passed
through a new "filter" framework before being output to
stdout/stderr. The "filter" OPAL MCA framework is intended to allow
preprocessing to messages before they are sent to their final
destinations. The first component that was written in the filter
framework was to create an XML stream, segregating all the messages
into different XML tags, etc. This will allow 3rd party tools to read
the stdout/stderr from the HNP and be able to know exactly what each
text message is (e.g., a help message, another OMPI infrastructure
message, stdout from the user process, stderr from the user process,
etc.).
Filtering is not active by default. Filter components must be
specifically requested, such as:
{{{
$ mpirun --mca filter xml ...
}}}
There can only be one filter component active.
= New MCA Parameters =
The new functionality described above introduces two new MCA
parameters:
* '''orte_base_help_aggregate''': Defaults to 1 (true), meaning that
help messages will be aggregated, as described above. If set to 0,
all help messages will be displayed, even if they are duplicates
(i.e., the original behavior).
* '''orte_base_show_output_recursions''': An MCA parameter to help
debug one of the known issues, described below. It is likely that
this MCA parameter will disappear before v1.3 final.
= Known Issues =
* The XML filter component is not complete. The current output from
this component is preliminary and not real XML. A bit more work
needs to be done to configure.m4 search for an appropriate XML
library/link it in/use it at run time.
* There are possible recursion loops in the orte_output() and
orte_show_help() functions -- e.g., if RML send calls orte_output()
or orte_show_help(). We have some ideas how to fix these, but
figured that it was ok to commit before feature freeze with known
issues. The code currently contains sub-optimal workarounds so
that this will not be a problem, but it would be good to actually
solve the problem rather than have hackish workarounds before v1.3 final.
This commit was SVN r18434.
Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs.
Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node.
This commit was SVN r18338.
Only one place used the user name field - session_dir, when formulating the name of the top-level directory. Accordingly, the code for getting the user's id has been moved to the session_dir code.
This commit was SVN r17926.
* Extension to the ESS framework to support C/R
* Fixed support for {{{snapc_base_establish_global_snapshot_dir}}}
* Fixed FileM support
* Misc. minor code modifications
There are some outstanding visability issues that I want to fix next.
This commit was SVN r17725.
