it to be an exit.
* Put the srun process (or what is about to become the srun process) in
it's own process group so that group-wide signals (such as the
SIGINT sent by hitting cntl-c in a shell) are not sent to the srun
process.
This commit was SVN r7068.
orte_init_stage1(), since not all ORTE processes call orte_init().
* Expad opal_error test case to make sure ORTE error codes print
properly
* Make project error codes start at easy values (OPAL is -1 to -100,
ORTE is -101 to -200, OMPI is less than -201) to make it easier
to figure out what an error code as an integer means. Also has
the nice property of not changing the values of error codes ever
time a new error code is added.
This commit was SVN r7061.
tree.
- fix up #include's throughout the tree (yay contrib/search_replace.pl!)
- remove a few extraneous #include's
- remove orte_sys_info*() from opal_init()/opal_finalize() (it's
already in orte_init_stage1() and orte_system_finalize())
- remove dependencies in opal on orte_system_info -- util/os_path.c
and util/os_create_dirpath.c (they only used path_sep, anyway --
easily changed to #defines)
This commit was SVN r7059.
session directory cleanup (among other things)
- When we get an abnormal exit in orterun (i.e., timeout expires and
we haven't gotten termination notices from all processes), print a
better message an exit in a better way (which includes session
directory cleanup)
- Fix tm and poe pls's to not exit() but rather propagate the error up
the stack (where relevant)
This commit was SVN r7058.
- Change orte_base_infrastructre to orte_infrastructre to conform with
ompi_info's needs
- Move MCA Param registration in ORTE to a centralized function that is
called first in orte_init_stage1
- Set the infrastructre flag as an argument to orte_init
- Adjust initalization functions to properly pass down the infrastructre
flag.
This commit was SVN r7053.
Also check to see if infrastructre flag was previously set before assuming it
to be false. This was causing orterun to operate incorrectly in the presence
of a persistant daemon.
This commit was SVN r7039.
NOTE: These have NOT been added to the Makefile.am in the repository. Please do NOT add them at this time - I will do so later.
This commit was SVN r6979.
OPAL_ERROR, same for all the other error codes. Also, make sure that there
are never conflicts between OPAL anr ORTE error codes (for example).
Finally, provide opal_perror(), opal_strerror(), and opal_strerror_r() to
give stringified error messages for the different error codes
This commit was SVN r6969.
multi-client issues the old version had. Also, ignore the NULL iof
component, since we shouldn't use it when using the proxy orteds
This commit was SVN r6939.
against the total number of processors. If not oversubscribing, emit
the MCA environment variable mpi_paffinity_processor with the
processor number to bind the process to. This parameter is picked up
during MPI_Init (i.e., ompi_mpi_init()) and used to bind the process,
but currently iif the MCA param mpi_paffinity_alone is set to a
nonzero value (i.e., the user asks for it).
This commit was SVN r6906.
- change the framework opens to [mostly] use the new MCA param API
- properly pass in framework debug output streams to the
mca_base_component_open() function
This commit was SVN r6888.
* Add base to memory framework so that we can do something sane with
ompi_info
* Updated ompi_info to print components for memory framework and
show whether we have memory hooks active or not.
This commit was SVN r6861.
ns_replica.c
- Removed the error logging since I use this function in orte_init_stage1 to
check if we have created a cellid yet or not.
ras_types.h & rase_base_node.h
- This was an empty file. moved the orte_ras_node_t from base/ras_base_node.h
to this file.
- Changed the name of orte_ras_base_node_t to orte_ras_node_t to match the
naming mechanisms in place.
ras.h
- Exposed 2 functions:
- node_insert:
This takes a list of orte_ras_base_node_t's and places them in the Node
Segment of the GPR. This is to be used in orte_init_stage1 for singleton
processes, and the hostfile parsing (see rds_hostfile.c). This just puts
in the appropriate API interface to keep from calling the
orte_ras_base_node_insert function directly.
- node_query:
This is used in hostfile parsing. This just puts in the appropriate API
interface to keep from calling the orte_ras_base_node_query function
directly.
- Touched all of the implemented components to add reference to these new
function pointers
ras_base_select.c & ras_base_open.c
- Add and set the global module reference
rds.h
- Exposed 1 function:
- store_resource:
This stores a list of rds_cell_desc_t's to the Resource Segment.
This is used in conjunction with the orte_ras.node_insert function in
both the orte_init_stage1 for singleton processes and rds_hostfile.c
rds_base_select.c & rds_base_open.c
- Add and set the global module reference
rds_hostfile.c
- Added functionality to create a new cellid for each hostfile, placing
each entry in the hostfile into the same cellid. Currently this is
commented out with the cellid hard coded to 0, with the intention of
taking this out once ORTE is able to handle multiple cellid's
- Instead of just adding hosts to the Node Segment via a direct call to
the ras_base_node_insert() function. First add the hosts to the Resource
Segment of the GPR using the orte_rds.store_resource() function then use
the API version of orte_ras.node_insert() to store the hosts on the Node
Segment.
- Add 1 new function pointer to module as required by the API.
rds_hostfile_component.c
- Converted this to use the new MCA parameter registration
orte_init_stage1.c
- It is possible that a cellid was not created yet for the current environment.
So I put in some logic to test if the cellid 0 existed. If it does then
continue, otherwise create the cellid so we can properly interact with the
GPR via the RDS.
- For the singleton case we insert some 'dummy' data into the GPR. The RAS
matches this logic, so I took out the duplicate GPR put logic, and
replaced it with a call to the orte_ras.node_insert() function.
- Further before calling orte_ras.node_insert() in the singleton case,
we also call orte_rds.store_resource() to add the singleton node to the
Resource Segment.
Console:
- Added a bunch of new functions. Still experimenting with many aspects of the
implementation. This is a checkpoint, and has very limited functionality.
- Should not be considered stable at the moment.
This commit was SVN r6813.
using orteprobe.
Created a header file for orte_setup_hnp. [HNP = Head Node Process]
General cleanup and added a bit of documentation in orte_setup_hnp.c
Also fixed a cellid tokens issue (circa line 285)
Changed the launched scope from private to public
In orteprobe:
- added reference to orted.h to avoid duplicate header contents in orteprobe.h
- removed the version tag, and put in a verbose argument
- Fixed a buffer packing problem that was causing the parent from receiving the
proper contact information for the new daemon.
This commit was SVN r6802.
If you register a parameter a second time, it overwrites the default
value (this was causing a problem with mpirun not being marked as orte
infrastructure, and therefore thinking that it was a singleton, and
therefore always adding the localhost into the node list).
This commit was SVN r6789.
- converted some things to new MCA param API
- renamed the pls_bproc_seed component struct so its name isn't the same as
the pls_bproc component's struct
- minor bugfixes
This commit was SVN r6774.
his e-mail:
I ran into a small bug in rmaps_rr.c: map_app_by_slot which was
triggered by using multiple app contexts. Basically, if not all the
slots we allocated on a node were used by an app, we would
automatically move onto the next node. This caused a problem with
multiple app contexts when the first app takes a partial allocation of
a node, the second app would not be able to access these slots because
we had already move past the node, and the byslot routine does not
wrap back around the list.
This commit was SVN r6766.
that were set on the command line. This was techinically exactly the
way the code was designed, but it certainly violated the Law of Least
Astonishment (even to its designer ;-) ). So now if you execute
something like this:
mpirun -mca pls_rsh_debug 1 -np 4 hello
You'll see debugging output from the rsh pls component, as you would
expect (this was not previously the case -- the MCA pls_rsh_debug
parame would be set to 1 in the 4 spawned hello processes, but *not*
in the orterun process).
More specifically, MCA parameters will be set in the orterun process
in the following cases:
- The new command line switch "--gmca" (or "-gmca") is used,
indicating that the MCA parameter is "global". --gmca also means
that that MCA parameter will be applied to all context app's. For
example:
mpirun -gmca foo bar -np 1 hello : -np 2 goodbye
The foo MCA param will be set in both the hello and goodbye
processes.
- If there is only one context app. For example:
mpirun -mca pls_rsh_debug 1 -np 4 hello
will set pls_rsh_debug to 1 in both the orterun process and the 4
spawned hello processes.
Also added a few more comments inside orterun to document a somewhat
confusing use of a state variable in a recursive case.
This commit was SVN r6764.
1. dump_xxx - analogous to the registry's dump commands, allows you to examine the contents of the name services' structures
2. get_job_peers - get an array of process names for all processes in the specified job
This commit was SVN r6759.
Somehow, in changing over to the new MCA interfaces, the "set" part of that logic got lost, so the singleton flag was always being set. This should repair some of the anomalous behavior seen recently where the local host was always being used for an application process.
This commit was SVN r6757.
containers when one is requested.
Fix a bug in gpr_replica_del_index_api which doesn't preset num_tokens and
num_keys, but assumes they are 0.
Fix orte_ras_base_node_delete() function to operate properly to delete the
appropriate container in the 'orte-node' segment when requested.
This commit was SVN r6756.
- convert MCA params to the new API
- some style and indenting fixes
- look at local shell, and if [new] MCA param
pls_rsh_assume_same_shell is 1, then assume that the remote shell is
the same as the local shell. If pls_rsh_assume_same_shell is 0, do
a probe to figure out what the remote shell is (NOT CURRENTLY
IMPLEMENTED! you'll get a run-time warning if you set this MCA param
to 0).
- if the remote shell is not csh and not bash, then prefix the remote
command with "( ! [ -e ./.profile ] || . ./.profile;" (and suffix it
with ")") so that we run the .profile on the remote side in order to
set PATHs and the like. See the LAM FAQ for details (will someday
be on the Open MPI FAQ:
http://www.lam-mpi.org/faq/category4.php3#question8)
- add a bunch of debugging output if the MCA param pls_rsh_debug is
enabled (or the top-level debug MCA param is enabled)
- add more help messages (and corresponding calls to opal_show_help())
in help-pls-rsh.txt
This commit was SVN r6731.
- we now properly support multiple application contexts
- much improved error messages, using opal_show_help
- fix some small bugs in the way the processes were discovering their names
- better searching for orted
- use the new mca parameter interface
These changes still need some testing, but they seem stable.
This commit was SVN r6719.
- Add functionality to parse multiple arguments provided in the console
- Cleaned up help function
- Added an option to hide commands from the help menu
Working on launching and reaping of daemons from within the console.
This commit was SVN r6699.
This required a little fiddling with a number of areas. Biggest problem was that it uncovered a potential for an infinite loop to be created in the registry. If a callback function modified the registry, the registry checked the triggers to see if anything had fired. Well, if the original callback was due to a trigger firing, that condition hadn't changed - so the trigger fired again....which caused the callback to be called, which modified the registry, which checked the triggers, etc. etc.
Triggers are now checked and then "flagged" as being "in process" so that the registry will NOT recheck that trigger until all callbacks have been processed. Tried doing this with subscriptions as well, but that caused a problem - when we release processes from a stagegate, they (at the moment) immediately place data on the registry that should cause a subscription to fire. Unfortunately, the system will just hang if that subscription doesn't get processed. So, I have left the subscription system alone - any callback function that modifies the registry in a fashion that will fire a subscription will indeed fire that subscription. We'll have to see if this causes problems - it shouldn't, but a careless user could lock things up if the callback generates a callback to itself.
Also fixed the code that placed a process' RML contact info on the registry to eliminate the leading '/' from the string.
This commit was SVN r6684.
- Added user help messages.
- Abstracted the internal commands, and the mechanism for
parsing and executing them.
- Cleaned up the command line parsing
- Some other misc. cleanup items.
Still much more work to do here, but should provide a more
intuitive interface for extending functionality in the
system.
This commit was SVN r6676.
more user friendly error messages.
Removed the "--version" command line option, since they should
get this from ompi_info [later to be orte_info].
If we find an invalid command line option print out the help
screen before exiting.
This commit was SVN r6670.
support in OMPI. Currently only enables/disables the architecture
sharing modex in ob1 pml.
* Add sds framework to ompi_info
* Figure out table ids to use for Portals BTL at configure time, since
we should use 30 & 31 on Red Storm, but the reference implementation
only supports 0-8.
* Some bug fixes in Portals UTCP sds
This commit was SVN r6650.
* Add Portals UTCP reference sds for when we are using the portals
reference implementation without the ORTE starters (when we want to
pretend like we're on Red Storm, only with a debugger and valgrind and
possibly even a printf that actually works...)
* Add super-secret --with flag to cnos rml to enable the cnos rml but
disable cnos_barrier (for use with portals utcp reference implementation)
This commit was SVN r6642.
test from orte_init_stage1 into a new framework, Startup Discovery Service
(sds). This allows us to have more flexibility with platforms like
Red Storm, which do not have a universe in the usual meaning and don't have
a seed daemon they can contact
This commit was SVN r6630.
- only call sched_yield if it exists
- don't fail out if modex doens't work in ob1
- bunch of fixes for Portals BTL
- add cnos rml component
- add NULL gpr component (should only be used if replica AND proxy
fail to load)
This commit was SVN r6629.
Haven't fully tested these yet (nobody is using them at the moment that I know of - good thing, since they haven't been working for a long time - though I know the MPI-2 stuff needs the functionality), but will do so shortly. For now, they compile.
This commit was SVN r6567.
1. Modify the registry to eliminate redundant data copying for startup messages.
2. Revise the subscription/trigger system to avoid redundant storage of triggers and subscriptions. This dramatically reduces the search time when a registry action occurs - to illustrate the point, there are now only a handful of triggers on the system for each job. Before, there were a handful of triggers for each PROCESS in the job, all of which had to be checked every time something happened on the registry. This is much, much faster now.
3. Update all subscriptions to the new format. There are now "named" subscriptions - this allows you to "name" a subscription that all the processes will be using. The first one to hit the registry actually defines the subscription. From then on, any subsequent "subscribes" to the same name just cause that process to "attach" to the existing subscription. This keeps the number of subscriptions being tracked by the registry to a minimum, while ensuring that each process still gets notified.
4. Do the same for triggers.
Also fixed a duplicate subscription problem that was causing people to receive data equal to the number of processes times the data they should have received from a trigger/subscription. Sorry about that... :-( ...but it's all better now!
Uncovered a situation where the modex data seems to be getting entered on the registry a second time - the latter time coming after the compound command has been "fired", thereby causing all the subscriptions to fire. Asked Tim and Jeff to look into this.
Second phase of the changes will involve modifying the xcast system so that the same message gets sent to all processes. This will further reduce the message traffic, and - once we have a true "broadcast" version of xcast - really speed things up and improve scalability.
This commit was SVN r6542.
1. Fix the reigstry's overwrite logic. It was only overwriting the first keyval specified in a value - the rest were just added on regardless of whether or not the keyval already existed. This was the source of the multiple keyvals some people were seeing - should be fixed now.
2. Change the orted command parsing options so it reports options that aren't recognized - should help reduce confusion
This commit was SVN r6536.
* Add ability to completely disable libltdl (the dlopen code to load
dynamic shared objects) to configure: --disable-dlopen
* Added MCA param (component_disable_dlopen) to disable DSO loading
at runtime
* Made the event library behave in some not-completely-erroneous way
on platforms where it has absolutely no eventops support (ie, no
select, poll, or epoll)
* Disabled orte_wait, opal_few, and opal_daemon_init code on
platforms without fork, waitpid support. All non-init functions
will return OPMI_ERR_NOT_SUPPORTED
* Disable orteprobe tool when fork or pipe aren't supported
This commit was SVN r6490.
- it will now wait for the child procs to exit then kill off the daemons
- if orted is in your path it will automatically be found, or you can
specify its location.
- your LD_LIBRARY_PATH is now forwarded to the backend to make it easier to use
shared libraries in nonstandard places
Still need to work on cleanup on the backend nodes.
This commit was SVN r6462.
sockaddr_in - seems to be a good indicator)
* disable util/if code if no inet devices (again, no sockaddr_in)
* add enable/disable flag to disable stacktrace pretty-print code
(defaults to enabled). Seems there's something funky going on with
the preprocessor on Red Storm that was causing problems - this was
the easiest fix
* clean up a bunch of the configure.m4 files to remove bogus comments,
properly comment them, fix the dumb logic for happy/unhappy
* Create a macro for testing both header and library for a package,
since we seem to do this kind of test quite often. Handles the
-I and -L search paths properly (including stripping out /usr and
/usr/local if not needed)
* Converted mvapi components to configure.m4, using the nice new
ompi_check_package macro (above)
This commit was SVN r6454.
threads (basically, same as before, but we now link the right thread
libraries).
* Add disable-io-romio flag to disable compiling ROMIO
* Migrathe mvapi btl from configure.stub to configure.m4
This commit was SVN r6453.
components to succeed with --enable-dist. Instead, just add them to
all_components and make dist will still work - we're going to stamp out
the Makefiles no matter what
* Add missing header to ob1 pml for make dist
* Clean up the Portals BTL configure code
This commit was SVN r6413.
frameworks, and components without configure scripts instead of
hard-coded shell variables (for projects and frameworks) and
shell variable building (for components).
* Add 3rd category of component configuration (in addition to configure
scripts and no-configured components): configure.m4 components. These
components can only be built as part of OMPI (like no-configure), but
can provide an m4 file that is run as part of the main configure
script. These macros can set whether the component should be built,
along with just about any other configuration wanted. More care must
be taken compared to configure components, as doing things like setting
variables or calling AC_MSG_ERROR now affects the top-level configure
script (so calling AC_MSG_ERROR if your component can't configure
probably isn't what you want)
* Added support to autogen.sh for the configure.m4-style components,
as well as building up the m4_define lists ompi_mca.m4 now expects
* Updated a number of macros to be more config.cache friendly (both
so that config.cache can be used and so the test can be quickly
run multiple times in the same configrue script):
- ompi_config_asm
- c_weak_symbols
- c_get_alignment
* Added new macros to be shared when configuring components:
- ompi_objc.m4 (this actually provides AC_PROG_OBJC - don't ask...)
- ompi_check_xgrid
- ompi_check_tm
- ompi_check_bproc
* Updated a number of components to use configure.m4 instead of
configure.stub
- btl portals
- io romio
- tm ras and pls
- bjs, lsf_bproc ras and bproc_seed pls
- xgrid ras and pls
- null iof (used by tm)
This commit was SVN r6412.
* mpi_show_mca_params
If set to true, this turns on the dumping of all MCA parameters when MPI_INIT is called.
Only the 'rank 0' processes will print the parameters.
* mpi_show_mca_params_file
(This value is only used if the first argument is set to true) If this value is non-NULL
it specifies the file to put the dump into. This file can then be used as input to mpirun
for debugging purposes. If this value is not set (and mpi_show_mca_params is set) then
the parameters are dumped to stdout.
This commit was SVN r6401.
- After long discussions and ruminations on how we run components in
LAM/MPI, made the decision that, by default, all components included
in Open MPI will use the version number of their parent project
(i.e., OMPI or ORTE). They are certaint free to use a different
number, but this simplification makes the common cases easy:
- components are only released when the parent project is released
- it is easy (trivial?) to distinguish which version component goes
with with version of the parent project
- removed all autogen/configure code for templating the version .h
file in components
- made all ORTE components use ORTE_*_VERSION for version numbers
- made all OMPI components use OMPI_*_VERSION for version numbers
- removed all VERSION files from components
- configure now displays OPAL, ORTE, and OMPI version numbers
- ditto for ompi_info
- right now, faking it -- OPAL and ORTE and OMPI will always have the
same version number (i.e., they all come from the same top-level
VERSION file). But this paves the way for the Great Configure
Reorganization, where, among other things, each project will have
its own version number.
So all in all, we went from a boatload of version numbers to
[effectively] three. That's pretty good. :-)
This commit was SVN r6344.
* rename ompi_malloc to opal_malloc
* rename ompi_numtostr to opal_numtostr
* start of rename of ompi_environ to opal_environ
This commit was SVN r6332.
* rename ompi_basename to opal_basename
* rename ompi bitop functions to opal
* rename ompi_cmd_line to opal_cmd_line
* rename ompi_sizet2int to opal_sizet2int
* rename orte_daemon_init to opal_daemon_init
* rename ompi_few to opal_few
This commit was SVN r6330.
