This code is the implementation of Software-base Performance Counters as described in the paper 'Using Software-Base Performance Counters to Expose Low-Level Open MPI Performance Information' in EuroMPI/USA '17 (http://icl.cs.utk.edu/news_pub/submissions/software-performance-counters.pdf). More practical usage information can be found here: https://github.com/davideberius/ompi/wiki/How-to-Use-Software-Based-Performance-Counters-(SPCs)-in-Open-MPI.
All software events functions are put in macros that become no-ops when SOFTWARE_EVENTS_ENABLE is not defined. The internal timer units have been changed to cycles to avoid division operations which was a large source of overhead as discussed in the paper. Added a --with-spc configure option to enable SPCs in the Open MPI build. This defines SOFTWARE_EVENTS_ENABLE. Added an MCA parameter, mpi_spc_enable, for turning on specific counters. Added an MCA parameter, mpi_spc_dump_enabled, for turning on and off dumping SPC counters in MPI_Finalize. Added an SPC test and example.
Signed-off-by: David Eberius <deberius@vols.utk.edu>
when profiling is built.
This prevents oshmem subroutines from being wrapped twice by third
party tools (e.g. once in oshmem and once in MPI)
see discussion starting at http://www.open-mpi.org/community/lists/devel/2015/08/17842.php
Thanks to Bert Wesarg for bringing this to our attention
OMPI_* to OPAL_*. This allows opal layer to be used more independent
from the whole of ompi.
NOTE: 9 "svn mv" operations immediately follow this commit.
This commit was SVN r21180.
- Delete unnecessary header files using
contrib/check_unnecessary_headers.sh after applying
patches, that include headers, being "lost" due to
inclusion in one of the now deleted headers...
In total 817 files are touched.
In ompi/mpi/c/ header files are moved up into the actual c-file,
where necessary (these are the only additional #include),
otherwise it is only deletions of #include (apart from the above
additions required due to notifier...)
- To get different MCAs (OpenIB, TM, ALPS), an earlier version was
successfully compiled (yesterday) on:
Linux locally using intel-11, gcc-4.3.2 and gcc-SVN + warnings enabled
Smoky cluster (x86-64 running Linux) using PGI-8.0.2 + warnings enabled
Lens cluster (x86-64 running Linux) using Pathscale-3.2 + warnings enabled
This commit was SVN r21096.
Anyway, this is blocking the move: do not include pml.h
if not really needed, aka none of the following used:
mca_pml
MCA_PML_CALL
OMPI_ANY_TAG
OMPI_ANY_SOURCE
OMPI_PROC_NULL
- Notable exceptions (deleting in one header->adding):
- ompi/mca/mtl/psm/
- ompi/mca/osc/rdma/
- ompi/mca/btl/openib/btl_openib_endpoint.c depended on
pml_base_sendreq.h
- Tested on Linux/x86-64, this time including make check
(thanks Jeff and Ralph)
This commit was SVN r20725.
Some MPI C interface files saw some spacing changes to conform to the coding standards of Open MPI.
Changed MPI C interface files to use {{{OPAL_CR_ENTER_LIBRARY()}}} and {{{OPAL_CR_EXIT_LIBRARY()}}} instead of just {{{OPAL_CR_TEST_CHECKPOINT_READY()}}}. This will allow the checkpoint/restart system more flexibility in how it is to behave.
Fixed the configure check for {{{--enable-ft-thread}}} so it has a know dependance on {{{--enable-mpi-thread}}} (and/or {{{--enable-progress-thread}}}).
Added a line for Checkpoint/Restart support to {{{ompi_info}}}.
Added some options to choose at runtime whether or not to use the checkpoint polling thread. By default, if the user asked for it to be compiled in, then it is used. But some users will want the ability to toggle its use at runtime.
There are still some places for improvement, but the feature works correctly. As always with Checkpoint/Restart, it is compiled out unless explicitly asked for at configure time. Further, if it was configured in, then it is not used unless explicitly asked for by the user at runtime.
This commit was SVN r17516.
multi-completion calls. Therefore reorder tests where appropriate.
- Always check for NULL-pointers (flag, index, completed) (yes, we
use them in the underlying ompi_request_* functions.
- Break early, if a NULL-request is found
This commit was SVN r15671.
development trees since last year (had to wait for some intel tests to
run yesterday, so I finally took the time to finish this work):
* Improve MPI API argument checking by also checking for NULL values
(especially helps when invalid Fortran MPI handles are passed,
because the various MPI_*f2c functions are supposed to return an
"invalid" MPI handle [meaning NULL] when this happens). So now
OMPI will generate an MPI exception rather than a segv.
* Removed a few redundant DATATYPE_NULL checks.
* Also check for some other forms of "invalid" handles (e.g., already
been freed, etc.) in some cases. We could probably be a bit more
stringent in this regard if we really wanted to.
* Change MPI_Get_processor_name to zero out the string up to
MPI_MAX_PROCESSOR_NAME characters, because the MPI spec says that
the string must be at least that long. We were already passing
that length to gethostname(), anyway.
This commit was SVN r14100.
This merge adds Checkpoint/Restart support to Open MPI. The initial
frameworks and components support a LAM/MPI-like implementation.
This commit follows the risk assessment presented to the Open MPI core
development group on Feb. 22, 2007.
This commit closes trac:158
More details to follow.
This commit was SVN r14051.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r13912
The following Trac tickets were found above:
Ticket 158 --> https://svn.open-mpi.org/trac/ompi/ticket/158
This commit fixes several aspects regarding MPI conformance of requests.
* Eliminate the last argument of ompi_errhandler_request_invoke(); we
''always'' want to invoke the back-end exception handler with the
real error code.
* Make it clear in comments that we only invoke the ''first''
exception in a given array of requests, even if there's more than
one request with a non-MPI_SUCCESS value for MPI_ERROR.
* Defer the freeing of requests upon exception in the back-end
functions to MPI_WAIT* and MPI_TEST* until later; the requests are
kept so that we know what handler to invoke when we actually invoke
the exception. After figuring that out, ''then'' we free requests
with pending exceptions on them.
* Clean up return codes from the back-end MPI_TEST* and MPI_WAIT*
functions.
* Slightly modify ompi_errcode_get_mpi_code() to return unity if it
receives an MPI error code (vs. an OMPI error code).
This commit was SVN r12810.
The following Trac tickets were found above:
Ticket 659 --> https://svn.open-mpi.org/trac/ompi/ticket/659
Had group discussion about this on the weekly call. The decision was
that we should pass the real error code to the back-end exception
handler because it's pretty useless to pass MPI_ERR_IN_STATUS to the
back-end exception handler (because exception handlers don't have
access to the request or the status - this has potential issues for
fault tolerance kinds of scenarios). So in TESTALL, TESTSOME,
WAITALL, and WAITSOME, we examine the error code and if it's not
MPI_SUCCESS, return MPI_ERR_IN_STATUS.
This commit was SVN r12389.
The following Trac tickets were found above:
Ticket 549 --> https://svn.open-mpi.org/trac/ompi/ticket/549
* For MPI_TEST, MPI_TESTANY, MPI_WAIT, and MPI_WAITANY (i.e., the
TEST/WAIT functions that return up to exactly one completed
request), return the actual error code.
* For MPI_TESTALL, MPI_TESTSOME, MPI_WAITALL, MPI_WAITSOME, (i.e.,
the TEST/WAIT functions that can return more than one completed
request), return MPI_ERR_IN_STATUS.
This commit was SVN r12355.
The following Trac tickets were found above:
Ticket 549 --> https://svn.open-mpi.org/trac/ompi/ticket/549
* Create a new request type: NOOP (described below)
* For all MPI_*_INIT functions, OBJ_NEW an ompi_request_t and set its
type to NOOP
* Ensure that the NOOP requests are OBJ_RELEASE'd when they are done
* MPI_START looks at the request type; if NOOP, just return success. If
not, call the PML start() function
* MPI_STARTALL always pass the entire array of requests back to the PML
(see next point)
* Make the PMLs only process PML requests (i.e., ignore/skip anything
that isn't of type PML -- such as the NOOP requests)
* Add a little more param error checking in STARTALL
This commit was SVN r12338.
The following Trac tickets were found above:
Ticket 529 --> https://svn.open-mpi.org/trac/ompi/ticket/529
- move files out of toplevel include/ and etc/, moving it into the
sub-projects
- rather than including config headers with <project>/include,
have them as <project>
- require all headers to be included with a project prefix, with
the exception of the config headers ({opal,orte,ompi}_config.h
mpi.h, and mpif.h)
This commit was SVN r8985.
