two minor updates:
- in all components: use the fh->f_bytes_per_agg value
(which might have been set by an info object) instead
of re-reading the mca parameter
- vulcan and dynamic_gen2: replace one allgather operation
by an allreduce, since it is used to determine the sum
of an array.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
add support for the info objects cb_buffer_size and collective_buffering.
Also, introduce a new mca parameter that allows to give feedback
on whether an info object is recognized (and honored).
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
this component can only be used in very specific scenarios. However, since some file systems do not support file locking and processes might be distributed over multiple nodes (hence the sm sharedfp component is also inelligible), the component might be selected in some scenarios, even if an application does not intend to use shared file pointers.
Since the fseek_shared function is involved as part of the File_set_view operation, only complain about the inability to perform the seek_shared operation if actual shared file pointer operations are being used. This avoid spurious error values being returned.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
this commit revamps the internal operations of the sharedfp components.
Specifically, it is focused around removing the second file_open
operation for shared file pointers. This makes the code more efficient.
Because of that, there is no necessity anymore for the sharedfp_lazy_open
mca parameter.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
This function is only used in ompi_spc.c and is hence declared as static.
Remove its prototype from the header file in order to silence compiler warnings who will typically consider ompi_spc_get_count() as a declared but not defined function.
Fixesopen-mpi/ompi#5279Fixesopen-mpi/ompi#5273
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
Extend number of supported ranks with providers that support
FI_REMOTE_CQ_DATA. Add README file to OFI MTL
Signed-off-by: Matias Cabral <matias.a.cabral@intel.com>
This code is the implementation of Software-base Performance Counters as described in the paper 'Using Software-Base Performance Counters to Expose Low-Level Open MPI Performance Information' in EuroMPI/USA '17 (http://icl.cs.utk.edu/news_pub/submissions/software-performance-counters.pdf). More practical usage information can be found here: https://github.com/davideberius/ompi/wiki/How-to-Use-Software-Based-Performance-Counters-(SPCs)-in-Open-MPI.
All software events functions are put in macros that become no-ops when SOFTWARE_EVENTS_ENABLE is not defined. The internal timer units have been changed to cycles to avoid division operations which was a large source of overhead as discussed in the paper. Added a --with-spc configure option to enable SPCs in the Open MPI build. This defines SOFTWARE_EVENTS_ENABLE. Added an MCA parameter, mpi_spc_enable, for turning on specific counters. Added an MCA parameter, mpi_spc_dump_enabled, for turning on and off dumping SPC counters in MPI_Finalize. Added an SPC test and example.
Signed-off-by: David Eberius <deberius@vols.utk.edu>
now that we have a shiny new fcoll component, no need
to keep the static component around. No use for it anymore.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
check for pending I/O operations and invalid modes
and return proper error codes before executing MPI_File_sync
makes the e_sync_1 test from the ibm testsuite pass.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
the interface if file_get_type_extent did not check
whether the input datatype is valid or not.
Makes the e_get_type_extend_2 test from the ibm testsuite pass.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
in case the user opened a file using the DELETE_ON_CLOSE flag,
return the error code generated in the delete operation.
Note, that this is however just a partial fix to the e_close_1 test
from the ibm testsuite, since the object destructor that triggers
the file_close function does not have a mechanism right now to recognize
and return an error code.
Signed-off-by: Edgar Gabriel <gabriel@cs.uh.edu>
in file_get_byte_offset, return an error code if the offset
leads to an invalid position in file.
Makes the e_get_byte_offset_1 test from the ibm testsuite pass.
Signed-off-by: Edgar Gabriel <gabriel@cs.uh.edu>
and some internal structure elements/components. Along the way,
add support for the cb_nodes Info object.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
since the request code is now being accessed also from the vulcan fcoll
component, the request code was relocated into the common/ompio
directory to avoid ld load problems.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
We introduced a new mca_vulcan parameter that specify the I/O synchronization
type (Async/sync I/O) applied within the collective write operation.
The user can explicitly choose to use async or sync write operation or make
the choice automatically made.
Signed-off-by: raafatfeki <fekiraafat@gmail.com>
For very large offsets, the data chunk size to be written by each aggregator
exceeds the capacity of an integer variable. Besides, some variables were
not large enough to hold intermediate values.
Signed-off-by: raafatfeki <fekiraafat@gmail.com>
Identify the index of each aggregator process in order to restrict the call to write_init function by the specific aggregator.
Signed-off-by: raafatfeki <fekiraafat@gmail.com>
Instead of using a temporary buffer and copy data into the temp buffer before sending, use a derived datatype to describe the data that needs to be sent during a cycle in the collective I/O operation.
Signed-off-by: raafatfeki <fekiraafat@gmail.com>
import of the new vulcan component. It is an enhanced version
of the two_phase component, which uses however the ompio internal
codes/loops to assemble the data arrays. It is therefore more inline
with the dynamic and dynamic_gen2 component, and will be easier to
maintain.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
If a subroutine of the Fortran `use-mpi-f08` binding in an MPI extension
have a `LOGICAL` parameter and no `TYPE(MPI_Status)` parameter,
it needs to use the `mpi_ext` module and call its corresponding subroutine
in the `mpif-h` directory, as explained in
`ompi/mpi/fortran/use-mpi-f08/mpi-f-interfaces-bind.h`.
However, as shown in the figure below, the required directories are dependent
on each other, and "Can't open module file" error occurs at build time.
ompi/mpiext/{extension name}/use-mpi-f08
A |
| |
| V
ompi/mpi/fortran/use-mpi-f08 <--- ompi/mpi/fortran/mpiext (mpi_ext.mod)
In order to solve this problem, change the configuration and the build order.
- divide Fortran extension directory (`ompi/mpi/fortran/mpiext`)
into the directories for `use-mpi` and for `use-mpi-08`
- `ompi/mpi/fortran/mpiext-use-mpi` : for `use-mpi` (mpi_ext.mod)
- `ompi/mpi/fortran/mpiext-use-mpi-f08` : for `use-mpi-08` (mpi_f08_ext.mod)
- change to the following build order about Fortran `use-mpi` and
`use-mpi-f08` bindings in `ompi`
1. mpi_ext bindings of MPI extensions (`mpiext/{extension name}/use-mpi` directory)
2. Fortran use-mpi (`mpi/fortran/use-mpi-[ignore-]tkr` directory)
3. Fortran extension for use-mpi (`mpi/fortran/mpiext-use-mpi` directory)
4. Fortran use-mpi-f08 modules only (`mpi/fortran/use-mpi-f08/mod` directory)
5. mpi_f08_ext bindings of MPI extensions (`mpiext/{extension name}/use-mpi-f08` directory)
6. Fortran use-mpi-f08 (`mpi/fortran/use-mpi-f08` directory)
7. Fortran extension for use-mpi-f08 (`mpi/fortran/mpiext-use-mpi-f08` directory)
Signed-off-by: Kurita, Takehiro <fj6370fp@aa.jp.fujitsu.com>
There was a race condition in 35438ae9b5: if multiple threads invoked
ompi_mpi_init() simultaneously (which could happen from both MPI and
OSHMEM), the code did not catch this condition -- Bad Things would
happen.
Now use an atomic cmp/set to ensure that only one thread is able to
advance ompi_mpi_init from NOT_INITIALIZED to INIT_STARTED.
Additionally, change the prototype of ompi_mpi_init() so that
oshmem_init() can safely invoke ompi_mpi_init() multiple times (as
long as MPI_FINALIZE has not started) without displaying an error. If
multiple threads invoke oshmem_init() simultaneously, one of them will
actually do the initialization, and the rest will loop waiting for it
to complete.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Implements butterfly algorithm for MPI_Reduce_scatter.
The algorithm can be used both by commutative and non-commutative operations, for power-of-two and non-power-of-two number of processes.
Signed-off-by: Mikhail Kurnosov <mkurnosov@gmail.com>
Get the OMPI rte/pmix component working. This was tested using PRRTE as the RM, configuring OMPI using:
* autogen --no-orte
* with external libevent, external hwloc, and external PMIx master
* configuring PMIx master with the same libevent and hwloc
* execute the application using PRRTE's "prun" launcher, which has the same cmd line as ORTE's mpirun
Note that PMIx master appears to have a bug in the event notification system that caches job termination events. Thus, the first execution runs fine, but subsequent executions cause an "abort" when the OMPI default error handler is invoked upon notification of the prior job's termination. Will work that separately.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
(cherry picked from commit 134cca9ac0de092d767999357573a31703f72292)
