installation directories) in configure, the files that depend on this
information are not properly rebuilt. If you need this information,
don't setup a -D in the Makefile.am - instead, include
opal/install_dirs.h.
* Use the : option in AC_CONFIG_FILES to avoid needing to expose that
we are playing around with temporary files with our headers to avoid
rebuilding
* Clean up the version file information a bit, and like the install
directory stuff, make sure that there is a dependency so that
ompi_info gets rebuilt properly when a version number changes.
This commit was SVN r9256.
r8698), with changes below:
- Split wrapper flags into those required for each of the three projects,
and cleaned up some cruft (including the LIBMPI_EXTRA_*FLAGS) through-
out the build system
- Added opal_init_util and opal_finalize_util to allow init / cleanup
of all the opal code that doesn't require the MCA system
- Create standalone key=value file parser, based on the one that used
to be in the mca param parser, so that it can be shared in multiple
places
- Add wrapper datafiles for opal, orte, and ompi wrappers, and add
wrapper compiler with support for all the old features
This commit was SVN r8699.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r8690
r8698
component/base Makefile.am files, reducing the time configure spends
stamping out Makefiles at the end
* Install base_impl.h file when devel-headers are being installed
This commit was SVN r8200.
originally suggested by Ralf Wildenhues, to try to speed autogen, configure,
and make (and possibly even make install). Use automake's include directive
to drastically reduce the number of Makefile files (although the number of
Makefile.am files is the same - most are just included in a top-level
Makefile.am). Also use an Automake SUBDIRs feature to eliminate the
dynamic-mca tree, which was no longer really needed. This makes adding
a framework easier (since you don't have to remember the dynamic-mca
tree) and makes building faster (as make doesn't have to recurse through
the dynamic-mca tree)
This commit was SVN r7777.
not to build to not be added to the ALL_COMPONENTS list and therefore
not distributed in a tarball
* add some of the contrib/ stuff to the dist tarball (the stuff to
make binary packages and the "--with-platform" files)
This commit was SVN r6955.
to opal_progress() to use the timers instead of a tick count for deciding
whether to call the event loop or not. Currently supported platforms are:
- solaris (x86 / sparc)
- Linux (x86 / x86_64 / IA64)
- Mac OS X (x86 / Power PC)
This commit was SVN r6922.
be compiled, as well as the ability for components to prioritize
the order in which they should be compiled so that the "right"
first one is selected. Make autogen.sh do all the hard sorting
work, so that the m4_defined lists of components are in the
prioritized order. From there, it's just forcing components
to fail after the first one succeeds (if we are in the "only one
compnent can build" mode).
This commit was SVN r6895.
* Add base to memory framework so that we can do something sane with
ompi_info
* Updated ompi_info to print components for memory framework and
show whether we have memory hooks active or not.
This commit was SVN r6861.
- only call sched_yield if it exists
- don't fail out if modex doens't work in ob1
- bunch of fixes for Portals BTL
- add cnos rml component
- add NULL gpr component (should only be used if replica AND proxy
fail to load)
This commit was SVN r6629.
components to succeed with --enable-dist. Instead, just add them to
all_components and make dist will still work - we're going to stamp out
the Makefiles no matter what
* Add missing header to ob1 pml for make dist
* Clean up the Portals BTL configure code
This commit was SVN r6413.
frameworks, and components without configure scripts instead of
hard-coded shell variables (for projects and frameworks) and
shell variable building (for components).
* Add 3rd category of component configuration (in addition to configure
scripts and no-configured components): configure.m4 components. These
components can only be built as part of OMPI (like no-configure), but
can provide an m4 file that is run as part of the main configure
script. These macros can set whether the component should be built,
along with just about any other configuration wanted. More care must
be taken compared to configure components, as doing things like setting
variables or calling AC_MSG_ERROR now affects the top-level configure
script (so calling AC_MSG_ERROR if your component can't configure
probably isn't what you want)
* Added support to autogen.sh for the configure.m4-style components,
as well as building up the m4_define lists ompi_mca.m4 now expects
* Updated a number of macros to be more config.cache friendly (both
so that config.cache can be used and so the test can be quickly
run multiple times in the same configrue script):
- ompi_config_asm
- c_weak_symbols
- c_get_alignment
* Added new macros to be shared when configuring components:
- ompi_objc.m4 (this actually provides AC_PROG_OBJC - don't ask...)
- ompi_check_xgrid
- ompi_check_tm
- ompi_check_bproc
* Updated a number of components to use configure.m4 instead of
configure.stub
- btl portals
- io romio
- tm ras and pls
- bjs, lsf_bproc ras and bproc_seed pls
- xgrid ras and pls
- null iof (used by tm)
This commit was SVN r6412.
so that I can next rename all the files under mca/btl using "svn mv" which is
not possible until after the initial "svn mv bmi btl" is checked in.
This commit was SVN r6220.
Merged in from:
svn merge -r5506:5553 https://svn.open-mpi.org/svn/ompi/tmp/hetero .
This commit was SVN r5552.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r5506
r5553
Merged in from:
svn merge -r5448:5496 https://svn.open-mpi.org/svn/ompi/tmp/hetero .
This commit was SVN r5550.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r5448
r5496
from:
svn merge -r5440:5448 https://svn.open-mpi.org/svn/ompi/tmp/hetero .
This commit was SVN r5549.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r5440
r5448
linked into libmpi
* add --enable-mca-direct to specify components that should be directly
called (instead of going through component structs and the like). The
components and component frameworks must explicitly support this.
Currently, only the TEG PML does so.
* Updated all the calls to the PML to use a macro so that they can either
be direct called or called through function pointer interfaces (aka
the component infrastructure)
This commit was SVN r5291.
script in components and distributes them as appropriate throughout
the tree (previously, we only did WRAPPERS_* flags). These flags are
*only* used when libmpi is being build statically (--disable-shared
--enable-static).
I also added another classification of flags -- LIBMPI_ALWAYS_* and
WRAPPERS_ALWAYS_* for flags that should always be added to the libmpi
/ wrapper linker lines, not just when compiling libmpi statically.
This commit was SVN r4322.
Note: in bringing this across, I have obeyed the mca-prefix-rule in defining functions and variables. However, I left the name of the component call as "orte_errmgr.xxx" so that any use of the code will directly "merge" with the new RTE branch without changes.
This commit was SVN r4099.
the src/mca/soh/base/*.c files out of the default build because
they're uncompilable right now -- don't want to step on any of Ralph's
local changes.
This commit was SVN r3837.
to the docs in src/utl/output.h from the last commit, might as well do
this one. No real rush to update to this, but you'll need to
re-autogen.sh, etc.
Fixes an old, small bug that caused the static-components.h files to
always be regenerated, even if they didn't change. This caused
several files to be unnecessarily recompiled if you ran the following:
./configure
make
./configure
make
Granted, this is a small error, but a) we have it Right in other
places, b) AC does the Right things for AC_CONFIG_HEADER, so we should
do the Right things too.
This commit was SVN r2638.
mojo in common/*/Makefile.am files. Also don't traverse into
src/mca/common and don't snarf the common convenience library if we're
not building staticly (remember: there is no "base" in common).
This commit was SVN r2323.
* add env pcmclient, which builds client data out of environment variables
* improved rsh infrastructure a little bit - almost able to get to calling
fork()
* Removed instance information for llm - it should be burried in the pcm,
not exposed
*** YOU MUST RUN AUTOGEN / CONFIGURE / etc AFTER UPDATING ***
This commit was SVN r2191.
horizontal integration
- Move the mpool_sm_mmap.[ch] files to a new sm common code area, and
rename to common_sm_mmap.[ch]
- update sm ptl and mpool to refer to the sm common code area for the
mmap code
This commit was SVN r1930.
* Add hostfile component for the LLM (reads hostfiles, returns array of
node identifiers
NOTES:
- This will require the full autogen / configure / make.
- You now need flex to build Open MPI from Subversion. The versions
available on most Linux boxen and OS X is more than new enough. You
do *not* need flex to build from a nightly or release tarball.
This commit was SVN r1890.
code base.
- many (most) mca type names have "component" or "module" in them,
as relevant, just to further distinguish the difference between
component data/actions and module data/actions. All developers
are encouraged to perpetuate this convention when you create
types that are specific to a framework, component, or module
- did very little to entire framework (just the basics to make it
compile) because it's just about to be almost entirely replaced
- ditto for io / romio
- did not work on elan or ib components; have to commit and then
convert those on a different machine with the right libraries and
headers
- renamed a bunch of *_module.c files to *_component.c and *module*c
to *component*c (a few still remain, e.g., ptl/ib, ptl/elan, etc.)
- modified autogen/configure/build process to match new filenames
(e.g., output static-components.h instead of static-modules.h)
- removed DOS-style cr/lf stuff in ns/ns.h
- added newline to end of file src/util/numtostr.h
- removed some redundant error checking in the top-level topo
functions
- added a few {} here and there where people "forgot" to put them in
for 1 line blocks ;-)
- removed a bunch of MPI_* types from mca header files (replaced with
corresponding ompi_* types)
- all the ptl components had version numbers in their structs; removed
- converted a few more elements in the MCA base to use the OBJ
interface -- removed some old manual reference counting kruft
This commit was SVN r1830.
