1
1
Граф коммитов

58 Коммитов

Автор SHA1 Сообщение Дата
George Bosilca
02bee12de8 Small cleanup.
This commit was SVN r20781.
2009-03-14 23:11:24 +00:00
Brian Barrett
716b505789 Fix for #1832. The stdin for the forked ssh wasn't being closed, so it was
"eating" all the stdin, leaving nothing for mpirun to forward on to the child
process

This commit was SVN r20776.
2009-03-13 22:34:56 +00:00
Rainer Keller
ec0ed48718 - Revert r20739
This commit was SVN r20742.

The following SVN revision numbers were found above:
  r20739 --> open-mpi/ompi@781caee0b6
2009-03-05 21:56:03 +00:00
Rainer Keller
a94438343b - Revert r20740
This commit was SVN r20741.

The following SVN revision numbers were found above:
  r20740 --> open-mpi/ompi@2a70618a77
2009-03-05 21:50:47 +00:00
Rainer Keller
2a70618a77 - Second patch, as discussed in Louisville.
Replace short macros in orte/util/name_fns.h
   to the actual fct. call.

 - Compiles on linux/x86-64

This commit was SVN r20740.
2009-03-05 21:14:18 +00:00
Rainer Keller
781caee0b6 - First of two or three patches, in orte/util/proc_info.h:
Adapt orte_process_info to orte_proc_info, and
   change orte_proc_info() to orte_proc_info_init().
 - Compiled on linux-x86-64
 - Discussed with Ralph

This commit was SVN r20739.
2009-03-05 20:36:44 +00:00
Rainer Keller
04567d3af0 - Header orte/mca/errmgr/errmgr.h is not needed.
Once again compiles fine with -Wimplicit-function-declaration   

This commit was SVN r20640.
2009-02-26 04:05:30 +00:00
Rainer Keller
96e1b9b747 - Header orte/mca/rml/rml.h is not needed if no occurence of orte_rml
or ORTE_RML.
   As the others compiles fine with -Wimplicit-function-declaration

This commit was SVN r20639.
2009-02-26 03:52:31 +00:00
Rainer Keller
02599446d0 - Occurences of ORTE_PROC_MY_NAME require orte/runtime/orte_globals.h
This commit was SVN r20607.
2009-02-20 03:16:13 +00:00
Rolf vandeVaart
515b99b357 Under SGE, the orted should not daemonize by default.
Also create mca parameter to force daemonization (previous
behavior) which might be needed on larger clusters or
to make use of the -notify flag with qsub.

This fixes trac:1783.

This commit was SVN r20582.

The following Trac tickets were found above:
  Ticket 1783 --> https://svn.open-mpi.org/trac/ompi/ticket/1783
2009-02-18 18:02:38 +00:00
Rainer Keller
d81443cc5a - On the way to get the BTLs split out and lessen dependency on orte:
Often, orte/util/show_help.h is included, although no functionality
   is required -- instead, most often opal_output.h, or               
   orte/mca/rml/rml_types.h                                           
   Please see orte_show_help_replacement.sh commited next.            

 - Local compilation (Linux/x86_64) w/ -Wimplicit-function-declaration
   actually showed two *missing* #include "orte/util/show_help.h"     
   in orte/mca/odls/base/odls_base_default_fns.c and                  
   in orte/tools/orte-top/orte-top.c                                  
   Manually added these.                                              

   Let's have MTT the last word.

This commit was SVN r20557.
2009-02-14 02:26:12 +00:00
Rolf vandeVaart
ce97c27a53 Make sure we create a valid parth argument for execve.
This gets SGE working in the trunk again.

This commit was SVN r20531.
2009-02-12 18:27:40 +00:00
Ralph Castain
816ef9e0a3 Ensure that the rsh_agent_argv is properly initialized when assembling the SGE qrsh command
This commit was SVN r20518.
2009-02-11 18:48:44 +00:00
Ralph Castain
f0af389910 Enable comm_spawn of slave processes, currently only active for the rsh, slurm, and tm environments. Establish support for local rsh environments in the plm/base so that rsh of local slaves can be done by any environment that supports it. Create new orte_rsh_agent param so users can specify rsh agent from outside of rsh plm, and sym link that to the old plm_rsh_agent and pls_rsh_agent options.
Modify the orte-bootproxy to pass prefix for the remote slave to support hetero/hybrid scenarios

This commit was SVN r20492.
2009-02-09 20:44:44 +00:00
Ralph Castain
f36b9332ab Pass along the new output-filename and xterm cmd line options to the orteds - otherwise, they won't work in ssh environments.
Modify the rsh launcher to add -X to ssh if xterm option was selected.

This commit was SVN r20407.
2009-02-03 20:06:05 +00:00
Jeff Squyres
bb3d258562 Round up a few places where PATH_MAX was used instead of
OMPI_PATH_MAX.  Thanks to Andrea Iob for the bug report.

This commit was SVN r20360.
2009-01-27 22:57:50 +00:00
Ralph Castain
f54fda489e This is a first step towards supporting fully-routed OOB communications:
1. remove direct routed module (hooray!)

2. add radix tree routed module (binomial remains default)

3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess

4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support

5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability

6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon)

Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm.

This will require an autogen...

This commit was SVN r19866.
2008-10-31 21:10:00 +00:00
Jeff Squyres
6d026b86b7 Fix a problem reported on the user list by Teng Lin: OPAL_PREFIX
wasn't exported in the Bourne-shell-flavor case on remote nodes.

This commit was SVN r19770.
2008-10-18 12:13:10 +00:00
Jeff Squyres
e34c93c46a Fix problem of missing ) noted by Mostyn Lewis.
This commit was SVN r19758.
2008-10-17 16:03:17 +00:00
Ralph Castain
48c3de1865 Fix a problem in the plm "failed to start" code observed by Jeff. When we are unable to launch to a specific node because it doesn't exist or is down, the system would hang and/or segv. The reason for the hang was that we were "firing" the orted exit trigger prior to its timer event being defined - thus "locking" that one-shot and preventing it from firing when we actually were ready to use it.
The segv was caused by the fact that we don't really know which daemon failed to start (at least, in most cases), so we didn't set a pointer to the aborted proc object. All we really wanted, though, was to ensure that mpirun returned a non-zero exit status, so the fix was to simply return the default error status.

This commit was SVN r19754.
2008-10-16 14:21:37 +00:00
Ralph Castain
a7afa869af Bring Jeff's changes over from v1.2 that restores the automatic source of .profile for bash and ksh shells.
This commit was SVN r19709.
2008-10-08 14:21:42 +00:00
Ralph Castain
f326ee356e Add some error output to the plm rsh
This commit was SVN r19532.
2008-09-10 01:59:49 +00:00
Ralph Castain
9b8473fdbf Cleanup orted cmd line - we don't need to pass nodenames, and shouldn't pass heartbeat unless the orted is going to use it. This helps shorten the cmd line for future use.
Cleanup when an orted actually opens the PLM. Unfortunately, some unmentionable people are pushing head node environs out to remote nodes, causing the daemons to think they are the HNP. This helps prevent the confusion.

This commit was SVN r19518.
2008-09-08 15:45:11 +00:00
Ralph Castain
4e0f34a062 When we hit an error prior to actually launching daemons, it would be nice if orterun didn't bark about daemons failing to launch, mpirun detecting a job failed, etc.
Add a new job state to indicate that we never attempted to launch. Flag such a scenario and avoid hitting all the other error messages.

This commit was SVN r19366.
2008-08-19 15:19:30 +00:00
Ralph Castain
49745c5f40 Provide a new option that allows a user to leave an ssh session open without getting deluged by ORTE debug output. The new option is --leave-session-attached, with a corresponding MCA param of orte_leave_session_attached.
Theoretically, any PLM could use this - but in reality, all of them except rsh/ssh already leave the session attached anyway.

This fixes trac:656 - a REALLY old ticket

This commit was SVN r19294.

The following Trac tickets were found above:
  Ticket 656 --> https://svn.open-mpi.org/trac/ompi/ticket/656
2008-08-14 18:59:01 +00:00
Ralph Castain
be02211b4f Modify the wakeup system to make it more Windows-friendly. This allows Shiqing to consolidate the Windows-specific modifications into one location, and generalizes the wakeup procedure in case we hit other system-specific requirements.
This needs some soak time to ensure we haven't opened any race conditions. I tried to loop everything in the shutdown procedure through that trigger event call to ensure it all goes through the one-time locks as it did before so that someone hitting ctrl-c when we are already shutting down shouldn't cause problems. Just want to let people use it for awhile to verify.

This commit was SVN r19159.
2008-08-05 15:09:29 +00:00
Ralph Castain
5b2f53a069 One more quick fix - ensure we are looking at the value and not its pointer
This commit was SVN r19123.
2008-08-01 23:39:55 +00:00
Jeff Squyres
26c7daf16a Fix typo
This commit was SVN r19121.
2008-08-01 21:30:53 +00:00
Ralph Castain
21cd4b9df8 Add pls_rsh_agent synonym to the PLM rsh component
This commit was SVN r19119.
2008-08-01 20:15:42 +00:00
Ralph Castain
a62b2a0150 Per the July technical meeting:
Standardize the handling of the orte launch agent option across PLMs. This has been a consistent complaint I have received - each PLM would register its own MCA param to get input on the launch agent for remote nodes (in fact, one or two didn't, but most did). This would then get handled in various and contradictory ways.

Some PLMs would accept only a one-word input. Others accepted multi-word args such as "valgrind orted", but then some would error by putting any prefix specified on the cmd line in front of the incorrect argument.

For example, while using the rsh launcher, if you specified "valgrind orted" as your launch agent and had "--prefix foo" on you cmd line, you would attempt to execute "ssh foo/valgrind orted" - which obviously wouldn't work.

This was all -very- confusing to users, who had to know which PLM was being used so they could even set the right mca param in the first place! And since we don't warn about non-recognized or non-used mca params, half of the time they would wind up not doing what they thought they were telling us to do.

To solve this problem, we did the following:

1. removed all mca params from the individual plms for the launch agent

2. added a new mca param "orte_launch_agent" for this purpose. To further simplify for users, this comes with a new cmd line option "--launch-agent" that can take a multi-word string argument. The value of the param defaults to "orted".

3. added a PLM base function that processes the orte_launch_agent value and adds the contents to a provided argv array. This can subsequently be harvested at-will to handle multi-word values

4. modified the PLMs to use this new function. All the PLMs except for the rsh PLM required very minor change - just called the function and moved on. The rsh PLM required much larger changes as - because of the rsh/ssh cmd line limitations - we had to correctly prepend any provided prefix to the correct argv entry.

5. added a new opal_argv_join_range function that allows the caller to "join" argv entries between two specified indices

Please let me know of any problems. I tried to make this as clean as possible, but cannot compile all PLMs to ensure all is correct.

This commit was SVN r19097.
2008-07-30 18:26:24 +00:00
Jeff Squyres
0af7ac53f2 Fixes trac:1392, #1400
* add "register" function to mca_base_component_t
   * converted coll:basic and paffinity:linux and paffinity:solaris to
     use this function
   * we'll convert the rest over time (I'll file a ticket once all
     this is committed)
 * add 32 bytes of "reserved" space to the end of mca_base_component_t
   and mca_base_component_data_2_0_0_t to make future upgrades
   [slightly] easier
   * new mca_base_component_t size: 196 bytes
   * new mca_base_component_data_2_0_0_t size: 36 bytes
 * MCA base version bumped to v2.0
   * '''We now refuse to load components that are not MCA v2.0.x'''
 * all MCA frameworks versions bumped to v2.0
 * be a little more explicit about version numbers in the MCA base
   * add big comment in mca.h about versioning philosophy

This commit was SVN r19073.

The following Trac tickets were found above:
  Ticket 1392 --> https://svn.open-mpi.org/trac/ompi/ticket/1392
2008-07-28 22:40:57 +00:00
George Bosilca
bcac9a0540 Remove a warning about using map when it is not initialized.
This commit was SVN r18957.
2008-07-21 14:35:05 +00:00
Ralph Castain
b1f367563c Few minor code cleanups
This commit was SVN r18890.
2008-07-11 15:40:41 +00:00
Pak Lui
924bface15 The plm env var should set to the name of a current plm module, which is rsh.
This commit was SVN r18844.
2008-07-08 23:15:52 +00:00
Ralph Castain
f799ea225f Orterun creates a "clean" copy of its environment for use in launching procs. This includes properly setting LD_LIBRARY_PATH and PATH, among other things. Unfortunately, our PLM modules were using the local environ instead of the saved copy, thus missing a number of things that really should have been included. From what I see, we got away with the error because the PLM's were duplicating all that setup logic themselves - I'll clean this up over the next few days.
Meantime, correct the PLM's so they use the correct environ for launching.

This commit was SVN r18713.
2008-06-23 22:39:36 +00:00
Ralph Castain
bf5c34d10a The rsh launcher is one place where multi-word MCA params would have to be passed via the orted cmd line. In such a case, we have to explicitly include quote marks about the param value. Add that capability here.
This commit fixes trac:1200

This commit was SVN r18621.

The following Trac tickets were found above:
  Ticket 1200 --> https://svn.open-mpi.org/trac/ompi/ticket/1200
2008-06-09 19:07:19 +00:00
Ralph Castain
9613b3176c Effectively revert the orte_output system and return to direct use of opal_output at all levels. Retain the orte_show_help subsystem to allow aggregation of show_help messages at the HNP.
After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach.

I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive.

This commit was SVN r18619.
2008-06-09 14:53:58 +00:00
Ralph Castain
7bee71aa59 Fix a potential, albeit perhaps esoteric, race condition that can occur for fast HNP's, slow orteds, and fast apps. Under those conditions, it is possible for the orted to be caught in its original send of contact info back to the HNP, and thus for the progress stack never to recover back to a high level. In those circumstances, the orted can "hang" when trying to exit.
Add a new function to opal_progress that tells us our recursion depth to support that solution.

Yes, I know this sounds picky, but good ol' Jeff managed to make it happen by driving his cluster near to death...

Also ensure that we declare "failed" for the daemon job when daemons fail instead of the application job. This is important so that orte knows that it cannot use xcast to tell daemons to "exit", nor should it expect all daemons to respond. Otherwise, it is possible to hang.

After lots of testing, decide to default (again) to slurm detecting failed orteds. This proved necessary to avoid rather annoying hangs that were difficult to recover from. There are conditions where slurm will fail to launch all daemons (slurm folks are working on it), and yet again, good ol' Jeff managed to find both of them.

Thanks you Jeff! :-/

This commit was SVN r18611.
2008-06-06 19:36:27 +00:00
George Bosilca
25ae9c12e6 Silence few warnings.
This commit was SVN r18568.
2008-06-03 19:58:40 +00:00
Ralph Castain
b456fb2d42 Upgrade the node/orted failure detection code to cover all environments. Use the native environment's capabilities where possible - e.g., SLURM detects orted failure and can report it. Elsewhere, use a heartbeat system to detect orted failure - e.g., for TM and rsh. Heart rate is set via mca param. The HNP checks for callback every 2*heartrate, declares orted failure if not seen in last 2*heartrate time.
Also detect orted failed-to-start by setting timeout on launch. Currently only used in TM launcher.

Neither detection is enabled by default, but are only active if heartrate is set and/or launch timeout is set. Exception for SLURM as orted failure is always detected and reported.

More info to come on devel list.

This commit was SVN r18555.
2008-06-02 21:46:34 +00:00
Pak Lui
695c158192 silence some intel and pgcc compiler warnings.
This commit was SVN r18501.
2008-05-26 20:35:13 +00:00
Pak Lui
7b3d7dcac4 This commit closes trac:1300.
This commit was SVN r18473.

The following Trac tickets were found above:
  Ticket 1300 --> https://svn.open-mpi.org/trac/ompi/ticket/1300
2008-05-21 22:35:04 +00:00
Jeff Squyres
e7ecd56bd2 This commit represents a bunch of work on a Mercurial side branch. As
such, the commit message back to the master SVN repository is fairly
long.

= ORTE Job-Level Output Messages =

Add two new interfaces that should be used for all new code throughout
the ORTE and OMPI layers (we already make the search-and-replace on
the existing ORTE / OMPI layers):

 * orte_output(): (and corresponding friends ORTE_OUTPUT,
   orte_output_verbose, etc.)  This function sends the output directly
   to the HNP for processing as part of a job-specific output
   channel.  It supports all the same outputs as opal_output()
   (syslog, file, stdout, stderr), but for stdout/stderr, the output
   is sent to the HNP for processing and output.  More on this below.
 * orte_show_help(): This function is a drop-in-replacement for
   opal_show_help(), with two differences in functionality:
   1. the rendered text help message output is sent to the HNP for
      display (rather than outputting directly into the process' stderr
      stream)
   1. the HNP detects duplicate help messages and does not display them
      (so that you don't see the same error message N times, once from
      each of your N MPI processes); instead, it counts "new" instances
      of the help message and displays a message every ~5 seconds when
      there are new ones ("I got X new copies of the help message...")

opal_show_help and opal_output still exist, but they only output in
the current process.  The intent for the new orte_* functions is that
they can apply job-level intelligence to the output.  As such, we
recommend that all new ORTE and OMPI code use the new orte_*
functions, not thei opal_* functions.

=== New code ===

For ORTE and OMPI programmers, here's what you need to do differently
in new code:

 * Do not include opal/util/show_help.h or opal/util/output.h.
   Instead, include orte/util/output.h (this one header file has
   declarations for both the orte_output() series of functions and
   orte_show_help()).
 * Effectively s/opal_output/orte_output/gi throughout your code.
   Note that orte_output_open() takes a slightly different argument
   list (as a way to pass data to the filtering stream -- see below),
   so you if explicitly call opal_output_open(), you'll need to
   slightly adapt to the new signature of orte_output_open().
 * Literally s/opal_show_help/orte_show_help/.  The function signature
   is identical.

=== Notes ===

 * orte_output'ing to stream 0 will do similar to what
   opal_output'ing did, so leaving a hard-coded "0" as the first
   argument is safe.
 * For systems that do not use ORTE's RML or the HNP, the effect of
   orte_output_* and orte_show_help will be identical to their opal
   counterparts (the additional information passed to
   orte_output_open() will be lost!).  Indeed, the orte_* functions
   simply become trivial wrappers to their opal_* counterparts.  Note
   that we have not tested this; the code is simple but it is quite
   possible that we mucked something up.

= Filter Framework =

Messages sent view the new orte_* functions described above and
messages output via the IOF on the HNP will now optionally be passed
through a new "filter" framework before being output to
stdout/stderr.  The "filter" OPAL MCA framework is intended to allow
preprocessing to messages before they are sent to their final
destinations.  The first component that was written in the filter
framework was to create an XML stream, segregating all the messages
into different XML tags, etc.  This will allow 3rd party tools to read
the stdout/stderr from the HNP and be able to know exactly what each
text message is (e.g., a help message, another OMPI infrastructure
message, stdout from the user process, stderr from the user process,
etc.).

Filtering is not active by default.  Filter components must be
specifically requested, such as:

{{{
$ mpirun --mca filter xml ...
}}}

There can only be one filter component active.

= New MCA Parameters =

The new functionality described above introduces two new MCA
parameters:

 * '''orte_base_help_aggregate''': Defaults to 1 (true), meaning that
   help messages will be aggregated, as described above.  If set to 0,
   all help messages will be displayed, even if they are duplicates
   (i.e., the original behavior).
 * '''orte_base_show_output_recursions''': An MCA parameter to help
   debug one of the known issues, described below.  It is likely that
   this MCA parameter will disappear before v1.3 final.

= Known Issues =

 * The XML filter component is not complete.  The current output from
   this component is preliminary and not real XML.  A bit more work
   needs to be done to configure.m4 search for an appropriate XML
   library/link it in/use it at run time.
 * There are possible recursion loops in the orte_output() and
   orte_show_help() functions -- e.g., if RML send calls orte_output()
   or orte_show_help().  We have some ideas how to fix these, but
   figured that it was ok to commit before feature freeze with known
   issues.  The code currently contains sub-optimal workarounds so
   that this will not be a problem, but it would be good to actually
   solve the problem rather than have hackish workarounds before v1.3 final.

This commit was SVN r18434.
2008-05-13 20:00:55 +00:00
Josh Hursey
9971bc9d95 Merge in the mca_base_select changes per RFC:
http://www.open-mpi.org/community/lists/devel/2008/04/3779.php

{{{
svn merge -r 18276:18380 https://svn.open-mpi.org/svn/ompi/tmp-public/jjh-mca-play .
}}}

Any components not in the trunk, but in one of the effected frameworks *must* be
updated. Contact the list, look at the RFC, or look at the diff for how to do this.

Sorry for the early commit of this, but I wanted to get it in today (per RFC) and
didn't know if I would have a chance later today.

This commit was SVN r18381.
2008-05-06 18:08:45 +00:00
Ralph Castain
b2c73f6e11 Fix tree-spawn to work within the new modex system
This commit was SVN r18349.
2008-05-01 19:19:34 +00:00
Ralph Castain
1766442591 Fix a double-free when tree-spawning
Fix the round-robin mapper so it doesn't move to the next node just because it completed mapping an app_context

This commit was SVN r18344.
2008-05-01 14:49:56 +00:00
Ralph Castain
3e55fe6f6d Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit.
Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs.

Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node.

This commit was SVN r18338.
2008-04-30 19:49:53 +00:00
Ralph Castain
4c2c6c9bd8 Ensure the pack/unpacks match for tree-spawn
This commit was SVN r18282.
2008-04-24 18:53:08 +00:00
Ralph Castain
09b6758f8c Pass the prefix dir to the remote orted when doing tree-based spawns
This commit was SVN r18280.
2008-04-24 18:38:24 +00:00
Ralph Castain
a4ea756a76 Ensure the node loop cntr gets incremented if the daemon already exists
This commit was SVN r18150.
2008-04-15 14:20:03 +00:00