It was decided some time ago that there is no benefit to using any
per-peer receive queues on infiniband. At the time we decided not to
change the default but that objection has been dropped. This commit
changes the 128 message queue to use SRQ instead of PP. This has no
impact on iWarp which sets the default in a different way.
Closesopen-mpi/ompi#1156
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
When PtlMDBind was removed, the result check was left in which
causes intermittent failures depending on the junk value found in
the 'ret' variable. The commit removes the result check.
Mofed 2.2 does not have the IBV_EXP_QP_INIT_ATTR_ATOMICS_ARG attribute
flag. Add a check to fix compilation for mofed 2.2. This commit only
fixes complilation with the older mofed. It will not allow an Open MPI
compiled with mofed 2.3 or newer to work on a machine with mofed 2.2.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
If btl-portals4 is configured to use logical mapping of ranks to
physical nodes, then the endpoint must have the rank field set.
This commit fixes a bug that caused the endpoint to have the
nid/pid instead of the rank if the endpoint already exists.
This update adds an additional check (if supported) to see if 8-byte
atomics are supported by the hardware. If 8-byte atomics are not
supported the atomics support is disabled.
This commit also includes some cleanup.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit adds support for fetch-and-add and compare-and-swap when
using the mlx5 driver. The support is only enabled if the expanded
verbs interface is detected. This is required because mlx5 HCAs return
the atomic result in network byte order. This support may need to be
tweaked if Mellanox commits their changes into upstream verbs.
Closesopen-mpi/ompi#1077
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
1. Fix: old v1.6-era code reset the stats-emitting event to fire twice
for each time period.
1. Add the usNIC device name to the output for differentiating the
output in multi-rail scenarios.
This commit fixes the following bugs:
- On send failure release newly allocated message.
- In the destructor for udcm_message_sent_t always remove the send
timeout event from the event base. Failure to do this can lead to
memory corruption since the destructor may be called from an event
callback.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This was fixed on my btl 3.0 branch but the changeset got lost in a
rebase. Fixes issues with lock ups when using osc/rdma.
References open-mpi/ompi#1010
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
The handling of RDMA get alignment in ugni BTL for Aries
(cray xc) was wrong, resulting in very poor bandwidth
for ugni BTL on aries.
Verified using osu_bw now gives sensible bandwidth on
Aries.
Fixes#1005
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
This commit removes the service and async event threads from the
openib btl. Both threads are replaced by opal progress thread
support. The run_in_main function is now supported by allocating an
event and adding it to the sync event base. This ensures that the
requested function is called as part of opal_progress.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit adds a access_flags argument to the mpool registration
function. This flag indicates what kind of access is being requested:
local write, remote read, remote write, and remote atomic. The values
of the registration access flags in the btl are tied to the new flags
in the mpool. All mpools have been updated to include the new argument
but only the grdma and udreg mpools have been updated to make use of
the access flags. In both mpools existing registrations are checked
for sufficient access before being returned. If a registration does
not contain sufficient access it is marked as invalid and a new
registration is generated.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
In the default mode of operation, the Portals4 components support
dynamic add_procs().
The Portals4 components have two alternate modes (flow control and
logical-to-physical) that require knowledge of all procs at startup.
In these modes, mtl-portals4 sets the MCA_MTL_BASE_FLAG_REQUIRE_WORLD
flag and btl-portals4 sets the MCA_BTL_FLAGS_SINGLE_ADD_PROCS flag
to tell the PML that we need all the procs in one add_procs() call.
After PMIx integration, the thrid parameter to OPAL_MODEX_RECV() is
opal_process_name_t instead of opal_proc_t. This commit replaces
proc with &proc->proc_name.
Fix CID 1312120: Uninitialized scalar variable
The response type will always be set unless a message of another type is passed to this function. To make sure that error is caught I am adding an assert.
Fix CID 1312116: Dereference after null check
This is a potential bug. If there is no endpoint data for an incoming connection a rejection should be sent. In this case we would just SEGV.
Fix CID 1312115: Dereference after null check
Clear error in the error message. Use the queue pair number that was passed in.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit adds support to the pml, mtl, and btl frameworks for
components to indicate at runtime that they do not support the new
dynamic add_procs behavior. At the high end the lack of dynamic
add_procs support is signalled by the pml using the new pml_flags
member to the pml module structure. If the
MCA_PML_BASE_FLAG_REQUIRE_WORLD flag is set MPI_Init will generate the
ompi_proc_t array passed to add_proc from ompi_proc_world () instead
of ompi_proc_get_allocated ().
Both cm and ob1 have been updated to detect if the underlying mtl and
btl components support dynamic add_procs.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
In the v1.10 opal_progress_thread emulation, ensure to create a
blocking libevent timer far in the future. Without that,
opal_event_loop() will return immediately (and therefore the progress
thread spins hard, stealing CPU cycles).
We try to keep the source code the same between master and v1.10. So
put the #if's back for OPAL_HAVE_HWLOC (and just hard-code it to 1 on
master) so that this code is also compilable in v1.10.
This commit makes two changes to the tcp btl:
- If a tcp proc does not exist when handling a new connection create
a new proc and use it. The current implementation uses the
opal_proc_by_name() function to get the opal_proc_t then calls
add_procs on all btl modules. It may be sufficient to just call
add_procs until an endpoint is created so this may change somewhat.
- In add_procs add a check for an existing endpoint before creating
one.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit adds an opal hash table to keep track of mapping between
process identifiers and ompi_proc_t's. This hash table is used by the
ompi_proc_by_name() function to lookup (in O(1) time) a given
process. This can be used by a BTL or other component to get a
ompi_proc_t when handling an incoming message from an as yet unknown
peer.
Additionally, this commit adds a new MCA variable to control the new
add_procs behavior: mpi_add_procs_cutoff. If the number of ranks in
the process falls below the threshold a ompi_proc_t is created for
every process. If the number of ranks is above the threshold then a
ompi_proc_t is only created for the local rank. The code needed to
generate additional ompi_proc_t's for a communicator is not yet
complete.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit updates each non-compliant btl to send the
MCA_BTL_FLAGS_SEND flag in the btl_flags field if send is
supported. This fixes a problem identified after the latest bml/r2
update which excplicitly checks for the send flag.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Bring Slurm PMI-1 component online
Bring the s2 component online
Little cleanup - let the various PMIx modules set the process name during init, and then just raise it up to the ORTE level. Required as the different PMI environments all pass the jobid in different ways.
Bring the OMPI pubsub/pmi component online
Get comm_spawn working again
Ensure we always provide a cpuset, even if it is NULL
pmix/cray: adjust cray pmix component for pmix
Make changes so cray pmix can work within the integrated
ompi/pmix framework.
Bring singletons back online. Implement the comm_spawn operation using pmix - not tested yet
Cleanup comm_spawn - procs now starting, error in connect_accept
Complete integration
