via the visibility feature that is provided by some compilers.
Per default this feature is disabled, to enable it you need to
configure with --enable-visibility and obviously you need a compiler
with visibility support. Please refer to the wiki for more information.
https://svn.open-mpi.org/trac/ompi/wiki/Visibility
This commit was SVN r14582.
with RDMAing the rest of it. Also more than one RDMA writes can be performed
simultaneously by different threads. To make this code thread safe this patch
clones original request convertor for each RDMA fragment.
This commit was SVN r14574.
Make sure that the wrapper selection is compiled out if not enabling FT. Before the
logic would skip over it since the conditional if statements would not be satisfied,
now there are no additional if statements when compiled out.
With this modification the selection logic looks nearly identical to pre-r14051
with the exception of the non-FT related improvements.
This commit was SVN r14491.
The following SVN revision numbers were found above:
r14051 --> open-mpi/ompi@dadca7da88
There is a binomial algorithm in the code (i.e., the HNP would send to a subset of the orteds, which then relay it on according to the typical log-2 algo), but that has a bug in it so the code won't let you select it even if you tried (and the mca param doesn't show, so you'd *really* have to try).
This also involved a slight change to the oob.xcast API, so propagated that as required.
Note: this has *only* been tested on rsh, SLURM, and Bproc environments (now that it has been transferred to the OMPI trunk, I'll need to re-test it [only done rsh so far]). It should work fine on any environment that uses the ORTE daemons - anywhere else, you are on your own... :-)
Also, correct a mistake where the orte_debug_flag was declared an int, but the mca param was set as a bool. Move the storage for that flag to the orte/runtime/params.c and orte/runtime/params.h files appropriately.
This commit was SVN r14475.
- Move the PML Modex stuff out of the BML -- Abstraction violation.
- Also fix the location of the add_procs with respect to the stage gates.
This commit was SVN r14422.
to move it into the unexpected queue. Instead pack the data in
only one buffer. Now the code look more optimized and clear, but
I have a doubt about who's using this functionality. I think that
all BTLs always return only one memory segment attached to the
matching fragment (i.e. there is no unexpected iov type receive).
This commit was SVN r14416.
Fix for memory corruption in the restarted process stack. This stemed from
the brute force method we were previously using. This commit fixes this by
using a lighter weight solution focused in the r2 BML instead of above the PML.
This is a more efficient and flexible solution, and it solves the original
problem.
In the process I pulled out the ft_event function in the tcp BTL and r2 BML
into a set of *_ft.[c|h] files just to keep any updates to these code paths
as isolated as possible to make merging easier on everyone.
This commit was SVN r14371.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
The following Trac tickets were found above:
Ticket 977 --> https://svn.open-mpi.org/trac/ompi/ticket/977
Per discussions with Brian and Ralph, make a slight correction in
where components are installed. Use $pkglibdir, not $libdir/openmpi,
so that when compiled in the orte trunk, components are installed to
the right directory (because the component search patch is checking
$pkglibdir).
This commit was SVN r14345.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r14289
time difference...
1) The PML makes an assumption on local/remote completion semantics of the BTL
which Self BTL does not obey, nor should it, so we fix the PML
2) The Get protocol must handle the case when sender and reciever do not agree
on wheter the data is contiguous
This commit was SVN r14313.
Remove a redundant statement in the r2 BML.
This commit was SVN r14228.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
- Remove an old comment from crcp_base_fns.c
- Let ob1 have its very own ft_event function (which I'll fill in shortly)
- Make sure ob1 finalizes the bsend stuff so we don't leave a bunch of memory sitting around
- PML base - destruct the array upon finalize. Shrink the include search so it stops after finding a match
This commit was SVN r14222.
computation of the current location on the pack/unpack process. This can
be used both for retrieving the pointer to the first byte (in the special
case of the cached RDMA protocol) and for getting the current
position (for the pipelined protocol).
I modified all BTLs, but most of them are still untested.
This commit was SVN r14180.
if less than or equal pml_ob1_unexpected_limit just buffer in the PML level recv
fragment else allocate a buffer via the bucket allocator
This commit was SVN r14117.
This merge adds Checkpoint/Restart support to Open MPI. The initial
frameworks and components support a LAM/MPI-like implementation.
This commit follows the risk assessment presented to the Open MPI core
development group on Feb. 22, 2007.
This commit closes trac:158
More details to follow.
This commit was SVN r14051.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r13912
The following Trac tickets were found above:
Ticket 158 --> https://svn.open-mpi.org/trac/ompi/ticket/158
- Implement the BML/r2 finialize funciton
- Cleanup the btl close routine
- Wire up a pml_base_verbose MCA parameter so you can actually watch the PML selection logic if you really want to.
- Fix a potental segfault in the selection logic.
ompi_pointer_array_get_item() may return NULL, so we have to check for it
This commit was SVN r13734.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
when on the Cray machine (aka when the NULL GPR is in use).
This commit was SVN r13638.
The following SVN revision numbers were found above:
r13582 --> open-mpi/ompi@041beeb1b6
adding new procs that the remote proc's pml is the same as our local pml.
Turns the hangs from mismatched PMLs into an abort, which is better,
I think.
This commit was SVN r13582.
open MTL MX and BTL MX and initialize them at the same time. The problem is
that both call mx_init and mx_finalize, solution is to add an external entity
that does the init and finalize (based on ref counting).
This commit was SVN r13576.
needlessly registered in multiple different places, and none of them
had a good help string. There was also an inconsistent check for
setting both mpi_leave_pinned and mpi_leave_pinned_pipeline (i.e., it
was only in ob1). This commit moves the registration of these params
to one central place (ompi/runtime/ompi_mpi_params.c, with all other
mpi_* MCA params) and uses globals to propagate the values as
relevant. The error check was also moved to the central location to
ensure that we can consistency everywhere.
This commit was SVN r13226.
return the buffer address from Fortran. It is not expected
behavior. For MPI_Buffer_attach, adjust the address of
the buffer handed in so it is always aligned.
Refs trac:750
Buffer detach reviewed by Jeff Squyres
Buffer attach alignment reviewed by George Bosilca
This commit was SVN r13205.
The following Trac tickets were found above:
Ticket 750 --> https://svn.open-mpi.org/trac/ompi/ticket/750
OB1 always use first element from array of BTLs available for RDMA. The patch
change the array creation algorithm, it puts different BTL in the first element
in round robin fashion.
This commit was SVN r13174.
components that use configure.m4 for configuration or are always built.
The macro has not been needed since moving to configure types other than
configure.stub
Fixes trac:590
This commit was SVN r13031.
The following Trac tickets were found above:
Ticket 590 --> https://svn.open-mpi.org/trac/ompi/ticket/590
George wrote the initial patch, I extended it slightly and am responsible for all bugs found.
Refs trac:587
This commit was SVN r13023.
The following Trac tickets were found above:
Ticket 587 --> https://svn.open-mpi.org/trac/ompi/ticket/587
* Make sure that the pval always writes to the correct portion of the
lval. This only matters on 32 bit big endian machines.
* On 32 bit machines when assigning to pval, the other 4 bytes of lval
weren't being written, which could lead to bogus data
We use macros so that there aren't casts all over the code and the pval
assignment can occur to the correct 4 bytes. Refs trac:587
This commit was SVN r12974.
The following Trac tickets were found above:
Ticket 587 --> https://svn.open-mpi.org/trac/ompi/ticket/587
udapl/openib/vapi/gm mpools a deprecated. rdma mpool has parameter that allows
to limit its size mpool_rdma_rcache_size_limit (default is 0 - unlimited).
This commit was SVN r12878.
Move the req_mtl structure back to the end of each of the structures in
the CM PML. The req_mtl structure is cast into a mtl_*_request_structure
for each MTL, which is larger than the req_mtl itself. The cast will cause
the *_request to overwrite parts of the heavy requests if the req_mtl
isn't the *LAST* thing on each structure (hence the comment). This was
moved as an optimization at some point, which caused buffer sends to fail...
Refs trac:669
This commit was SVN r12873.
The following SVN revision numbers were found above:
r12871 --> open-mpi/ompi@597598b712
The following Trac tickets were found above:
Ticket 669 --> https://svn.open-mpi.org/trac/ompi/ticket/669
CM PML. The req_mtl structure is cast into a mtl_*_request_structure for
each MTL, which is larger than the req_mtl itself. The cast will cause
the *_request to overwrite parts of the heavy requests if the req_mtl
isn't the *LAST* thing on each structure (hence the comment). This was
moved as an optimization at some point, which caused buffer sends to
fail...
Refs trac:669
This commit was SVN r12871.
The following Trac tickets were found above:
Ticket 669 --> https://svn.open-mpi.org/trac/ompi/ticket/669
I found only two places that were looking at the tokens:
1. the odls - we used the tokens to separately process the globals container data from everything else. In this case, I left the subscription that returned the globals data alone, but "stripped" the subscription that returned the launch data for the procs. These subscriptions have nothing to do with the xcast message.
2. the pml_base_modex - the callback function was getting process names from the returned tokens. Actually, this function was doing a very bad thing - it was assuming that the first token returned was *always* the process name. This is currently true, but is one of those assumptions that someone could have easily changed - and suddenly found the system inexplicably failing. I modified the function to (a) get the name sent back to us, (b) "stripped" the value structures of tokens and segment strings, and (c) correctly obtained process names from the returned values. I also reindented the heck out of the code so it was legible (at least, to my old eyes).
This commit was SVN r12813.
* Do not add new procs to the global list during modex callback or
when sharing orte names during accept/connect. For modex, we
cache the modex info for later, in case that proc ever does get
added to the global proc list. For accept/connect orte name
exchange between the roots, we only need the orte name, so no
need to add a proc structure anyway. The procs will be added
to the global process list during the proc exchange later in
the wireup process
* Rename proc_get_namebuf and proc_get_proclist to proc_pack
and proc_unpack and extend them to include all information
needed to build that proc struct on a remote node (which
includes ORTE name, architecture, and hostname). Change
unpack to call pml_add_procs for the entire list of new
procs at once, rather than one at a time.
* Remove ompi_proc_find_and_add from the public proc
interface and make it a private function. This function
would add a half-created proc to the global proc list, so
making it harder to call is a good thing.
This means that there's only two ways to add new procs into the global proc list at this time: During MPI_INIT via the call to ompi_proc_init, where my job is added to the list and via ompi_proc_unpack using a buffer from a packed proc list sent to us by someone else. Currently, this is enough to implement MPI semantics. We can extend the interface more if we like, but that may require HNP communication to get the remote proc information and I wanted to avoid that if at all possible.
Refs trac:564
This commit was SVN r12798.
The following Trac tickets were found above:
Ticket 564 --> https://svn.open-mpi.org/trac/ompi/ticket/564
r12714) for supporting compilers / architectures with different
padding rules.
This commit was SVN r12749.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r12491
r12714
hits the buffer on the other side. For this kind of BTLs we need to send
FIN through the same BTL, PUT was performed with so network will handle
ordering for us. If we will use another BTL, receiver can get FIN before
data will hit the buffer and complete request prematurely. We mark such
problematic BTLs with MCA_BTL_FLAGS_FAKE_RDMA flag (this kind of RDMA
is really fake, because the real one guaranties that sender will see the
completion only after receiver's NIC confirmed that all the data was
received).
This commit was SVN r12732.
It calls mca_pml_ob1_send_fin_btl() which may fail and doesn't check return
code. This breaks all RDMA transports event when only one BTL is used. Revert
it for now, I am working on a real fix for the problem (I hope).
This commit was SVN r12731.
The following SVN revision numbers were found above:
r12720 --> open-mpi/ompi@3e3689320b
regresion from v1.1 was reviewed and put to v1.2 branch. So revert this part
of r12721 back.
This commit was SVN r12730.
The following SVN revision numbers were found above:
r12433 --> open-mpi/ompi@82f7c0dd69
r12721 --> open-mpi/ompi@3edd850d2e
protocol when multiple NICS are available between 2 peers. The fix force
the FIN message to take exactly the same path as the fragment it describe
(i.e. same path means same BTL). Otherwise, the FIN can be received by
the peer before the RDMA complete and the request will get freed
too early.
This commit was SVN r12720.
Accordingly, there are new APIs to the name service to support the ability to get a job's parent, root, immediate children, and all its descendants. In addition, the terminate_job, terminate_orted, and signal_job APIs for the PLS have been modified to accept attributes that define the extent of their actions. For example, doing a "terminate_job" with an attribute of ORTE_NS_INCLUDE_DESCENDANTS will terminate the given jobid AND all jobs that descended from it.
I have tested this capability on a MacBook under rsh, Odin under SLURM, and LANL's Flash (bproc). It worked successfully on non-MPI jobs (both simple and including a spawn), and MPI jobs (again, both simple and with a spawn).
This commit was SVN r12597.
Same sort of problem and fix as described in r12323 - mca_pml_ob1_recv_frag_progress() was segfaulting due to a NULL req_proc pointer. The path leading to this was through the mca_pml_ob1_check_cantmatch_for_match() function, where we can match a frag using the same macros as mca_pml_ob1_frag_match() and never initialize the req_proc pointer.
This commit was SVN r12582.
The following SVN revision numbers were found above:
r12323 --> open-mpi/ompi@c752502dee
is that if one add "pml=" to the configuration file, really bad things
happen. All PMLs will get initialize, and each of them will initialize
all BTLs. This patch force the mca_pml_base_pml to get initialized in
all cases before we go out of the mca_pml_base_open function.
This commit was SVN r12527.
set it up before the match when we know the peer, saving some
time on the critical path. If the receive is ANY_SOURCE then
we initialize the convertor on _MATCHED. Anyway, we will set it
up only once per receive.
This commit was SVN r12484.
This commit essentially caches the invoking comm/win/file on the
ompi_request_t. This, paired with the req_type field, allows us to
retrieve the invoking MPI object and invoke the proper errhandler.
The patch is missing most updates for the MPI-2 one-sided stuff (i.e.,
the patch mainly fixes comms and files); I didn't really understand
that code and didn't want to hazard trying to figure it out when Brian
can probably do it much more quickly.
So #250 will still stay open, pending MPI-2 one-sided updates for this
stuff.
This commit was SVN r12339.
The following Trac tickets were found above:
Ticket 250 --> https://svn.open-mpi.org/trac/ompi/ticket/250
* Create a new request type: NOOP (described below)
* For all MPI_*_INIT functions, OBJ_NEW an ompi_request_t and set its
type to NOOP
* Ensure that the NOOP requests are OBJ_RELEASE'd when they are done
* MPI_START looks at the request type; if NOOP, just return success. If
not, call the PML start() function
* MPI_STARTALL always pass the entire array of requests back to the PML
(see next point)
* Make the PMLs only process PML requests (i.e., ignore/skip anything
that isn't of type PML -- such as the NOOP requests)
* Add a little more param error checking in STARTALL
This commit was SVN r12338.
The following Trac tickets were found above:
Ticket 529 --> https://svn.open-mpi.org/trac/ompi/ticket/529
allocation logic is completely done outside the data-type engine (in the PML) there is
no need for any special case inside the data-type engine. There is less arguments for
the ompi_convertor_pack and ompi_convertor_unpack as well (the last field free_after is
not required anymore as there is no memory allocated in the engine itself). This change
affect all components using datatypes. I test most of them, but it might happens that I
miss some ... If it's the case please let me know (don't shoot the pianist!!).
This commit was SVN r12331.
A segfault would occur in mca_pml_ob1_recv_request_progress() when trying to prepare the convertor for unpacking, because the request's req_proc field was NULL.
Turns out that we weren't setting the req_proc field in the MCA_PML_OB1_CHECK_SPECIFIC_AND_WILD_RECEIVES_FOR_MATCH macro. Instead of just setting it there I removed the other place req_proc was being set correctly, and instead took care of all the cases at once in mca_pml_ob1_recv_frag_match().
This commit was SVN r12323.
parameter. For optimisation purpose only this BTL is used to send packet
through instead of trying to send packets through all BTLs. But actually the
code was wrong. It simply used provided bml_btl and it may represent different
endpoint from packet's destination. The fixed code checks if packet's
destination is reachable through the BTL, finds appropriate bml_btl and only
then tries to send it through correct bml_btl.
This commit was SVN r12319.
mentioned in the comment the completion/callback of the triggered
send operation can happen before the call returns. If this happens and
if the pipeline depth is 0 before we triggered the send operation and
this is the last send operation of the request then the completion detection
code will decrement the pipeline depth and check it for equality to 0.
Because (0-1) != 0 the pml completion function for this request will
*not* be called.
This part 2 of the fix for ticket #246.
This commit was SVN r12292.
all platforms. The only exceptions (and I will not deal with them
anytime soon) are on Windows:
- the write functions which require the length to be an int when it's
a size_t on all UNIX variants.
- all iovec manipulation functions where the iov_len is again an int
when it's a size_t on most of the UNIXes.
As these only happens on Windows, so I think we're set for now :)
This commit was SVN r12215.
size and diplacement of data-type. After this patch all data can contain size_t bytes
and the displacements are defined as ptrdiff_t. All of the files I was able to compile
have been modified to match this requirement.
This commit was SVN r12146.
First, move the OPAL_THREAD_LOCK out to the same level as its corresponding UNLOCK. It was possible to hit the UNLOCK without ever acquiring the lock.
Since the OPAL_THREAD_ADD64() is now protected by this lock, we can just do the decrement non-atomically.
This commit was SVN r11958.
Don't try to acquire ompi_request_lock here, which in all cases is already held. Avoids deadlock that occurs even when threads are enabled and we're running a THREAD_SINGLE app.
Reviewed by Galen.
This commit was SVN r11957.
The following Trac tickets were found above:
Ticket 183 --> https://svn.open-mpi.org/trac/ompi/ticket/183
long ago) supposed to be used as a cache for accessing the PML procs. But in
all of the PMLs the PML proc contain only one field i.e. a pointer to the ompi_proc.
This pointer can be accessed using the c_remote_group easily. Therefore, there is no
meaning of keeping the PML procs around. Slim fast commit ...
This commit was SVN r11730.
if we want to be able to reuse the request. If not, the request will never be freed
even if the user call MPI_Request_free.
This commit was SVN r11717.
different macros, one for each project. Therefore, now we have OPAL_DECLSPEC,
ORTE_DECLSPEC and OMPI_DECLSPEC. Please use them based on the sub-project.
This commit was SVN r11270.
through the c_pml_procs, as it might be an intercommunicator and therefore
c_my_rank might not be a valid index.
Fixes trac:266.
This commit was SVN r11238.
The following Trac tickets were found above:
Ticket 266 --> https://svn.open-mpi.org/trac/ompi/ticket/266
so use the req_buff field for keeping track of the bsend buffer and the
req_addr field for the user buffer, the way the comments suggested we
were doing it
This commit was SVN r11233.
the upperlayer assynchronously although there are some issues with this.. such
as there are multiple consumers of the btl's.. who get's the
This commit was SVN r11232.
Clean up the remainder of the size_t references in the runtime itself. Convert to orte_std_cntr_t wherever it makes sense (only avoid those places where the actual memory size is referenced).
Remove the obsolete oob barrier function (we actually obsoleted it a long time ago - just never bothered to clean it up).
I have done my best to go through all the components and catch everything, even if I couldn't test compile them since I wasn't on that type of system. Still, I cannot guarantee that problems won't show up when you test this on specific systems. Usually, these will just show as "warning: comparison between signed and unsigned" notes which are easily fixed (just change a size_t to orte_std_cntr_t).
In some places, people didn't use size_t, but instead used some other variant (e.g., I found several places with uint32_t). I tried to catch all of them, but...
Once we get all the instances caught and fixed, this should once and for all resolve many of the heterogeneity problems.
This commit was SVN r11204.
than $(LN_S). This causes problems with with Windows and probably
elsewhere (re: #200). So use a slightly different trick to get the
right header selected for the MEMCPY and TIMER components.
* Using the same trick used to solve the AC_CONFIG_LINKS problem,
stop using a separate header file for direct calling in the
PML and MTL. This lets me remove some icky code in ompi_mca.m4
that was more fragile than I really liked.
This commit was SVN r10841.
We now set truncation error if we received more than we delivered for both
the OB1 and DR PMLs (the CM PML doesn't need such a fix, as the condition
is set at the MTL level)
This commit was SVN r10812.
The following Trac tickets were found above:
Ticket 172 --> https://svn.open-mpi.org/trac/ompi/ticket/172
all but buffered and persistent requests. Unfortunately we were note able to
reuse the pml_base_request_t as it was just too heavy for our needs. Lots of
code for 2/10 usec ;-)
This commit was SVN r10810.
There was some old code regarding the convertor which does not have to be there
(the problem was corrected a while ago). In the PML we already know how the progress
function is defined, so call the BML progress instead, which will save one function
call.
The macro MCA_PML_OB1_COMPUTE_SEGMENT_LENGTH is already defined in the pml_ob1.h
so it should not be in the endpoint.h.
Remove a double definition of the mca_pml_ob1_progress function in the pml_ob1.h.
This commit was SVN r10775.
is the one provided by the user. For the buffered send the real datatype used
for the communication is always MPI_BYTE and the count can be retrieved from
the req_bytes_packed field. This will decrease the size of the request by
one pointer and one size_t (8 bytes or 16 bytes depending on the architecture).
This commit was SVN r10680.
bsend_request_init, but not both. Otherwise, you don't free
some buffer space and end up leaking buffers and ending in
badness
* since you only call alloc() or init(), but not both, need to
restore reference counting in init()
This commit was SVN r10674.
interconnects that provide matching logic in the library.
Currently includes support for MX and some support for
Portals
* Fix overuse of proc_pml pointer on the ompi_proc structuer,
splitting into proc_pml for pml data and proc_bml for
the BML endpoint data
* bug fixes in bsend init code, which wasn't being used by
the OB1 or DR PMLs...
This commit was SVN r10642.
standard). This macro allow us to specify the length of the fragment. Now we are
able to know how the message is fragmented between the network devices or inside
the communication protocol.
This commit was SVN r10508.
by the BTL (btl_max_rdma_size). Now the PUT protocol is pipelined even if there
is just one network between the 2 peers. Unfortunately, this problem is present
the 1.1 (no pipeline for the PUT protocol).
This commit was SVN r10499.
call to the _UNPACK macro, in the case where the length of the received data
is zero. This might happens on the PUT protocol.
This commit was SVN r10431.
Sender can receive and complete PUT request before it gets completion on the first rndv packet. senreq struct may be reused for the next MPI_Send and unexpected completion mess up the things. I sometimes got SEGV and sometimes data corruption.
This commit was SVN r10301.
- change MASK behavior for tags - we need the upper bit to be whether
the tag is reseved or not. MPI_ANY_TAG should not pull off any
reserved tag communication
- some other random debugging output to try to get some idea what is
spewing out of here.
This commit was SVN r9844.
message from a known peer (not MPI_ANY_SOURCE) then we can attach the
remote proc and initialize the convertor as soon as we know the data-type,
and the count (so basically in the _INIT macro). If it's not the case, then
create them in the _MATCHED macro (as in the original version). Of course,
beforeinitializing the convertor we check that there will be some data
in the message.
This commit, plus the convertor improvements from few days ago, lower the
latency for my test case environment (mvapi) by 0.1 microseconds. The convertor
now is as slim as it can be, I don't think there is anything else to
remove/improve.
This commit was SVN r9843.
or the bit-wise or changes all the high bits, which is bad
* push convertor creation to init to save a bit of time
* make debugging use macros so that it can go bye-bye
This commit was SVN r9810.
paper. This is just the shell, for checkpoint. Changes:
* Fix copyrights
* remove cancel code and ptl references
* add dump command
This commit was SVN r9779.
We support all the events in the PERUSE specifications, but right now only one event
of each type can be attached to a communicator. This will be worked out in the future.
The events were places in such a way, that we will be able to measure the overhead
for our threading implementation (the cost of the synchronization objects).
This commit was SVN r9500.
add object size to opal class
no longer need the size when allocating a new object as this is stored in
the class structure
--- dr changes
Previous rev. maintained state on the communicator used for acking duplicate
fragments, but the communicator may be destroyed prior to successfull
delivery of an ack to the peer. We must therefore maintain this state
globally on a per peer, not a per peer, per communicator basis.
This requires that we use a global rank on the wire and translate this as
appropriate to a local rank within the communicator.
This commit was SVN r9454.
only as a pointer reference completely confuse some compilers (gcc 4.1
included). Removing the inline (it was there before when the function
was used in the same file) seems to solve the problem. However, the most
strange thing is that the bug only appear when we compile directly in
the trunk directory. It just don't happens when we're using the VPATH
build.
This commit was SVN r9408.
