1
1
Граф коммитов

11 Коммитов

Автор SHA1 Сообщение Дата
Rainer Keller
d81443cc5a - On the way to get the BTLs split out and lessen dependency on orte:
Often, orte/util/show_help.h is included, although no functionality
   is required -- instead, most often opal_output.h, or               
   orte/mca/rml/rml_types.h                                           
   Please see orte_show_help_replacement.sh commited next.            

 - Local compilation (Linux/x86_64) w/ -Wimplicit-function-declaration
   actually showed two *missing* #include "orte/util/show_help.h"     
   in orte/mca/odls/base/odls_base_default_fns.c and                  
   in orte/tools/orte-top/orte-top.c                                  
   Manually added these.                                              

   Let's have MTT the last word.

This commit was SVN r20557.
2009-02-14 02:26:12 +00:00
Jeff Squyres
0af7ac53f2 Fixes trac:1392, #1400
* add "register" function to mca_base_component_t
   * converted coll:basic and paffinity:linux and paffinity:solaris to
     use this function
   * we'll convert the rest over time (I'll file a ticket once all
     this is committed)
 * add 32 bytes of "reserved" space to the end of mca_base_component_t
   and mca_base_component_data_2_0_0_t to make future upgrades
   [slightly] easier
   * new mca_base_component_t size: 196 bytes
   * new mca_base_component_data_2_0_0_t size: 36 bytes
 * MCA base version bumped to v2.0
   * '''We now refuse to load components that are not MCA v2.0.x'''
 * all MCA frameworks versions bumped to v2.0
 * be a little more explicit about version numbers in the MCA base
   * add big comment in mca.h about versioning philosophy

This commit was SVN r19073.

The following Trac tickets were found above:
  Ticket 1392 --> https://svn.open-mpi.org/trac/ompi/ticket/1392
2008-07-28 22:40:57 +00:00
Ralph Castain
9613b3176c Effectively revert the orte_output system and return to direct use of opal_output at all levels. Retain the orte_show_help subsystem to allow aggregation of show_help messages at the HNP.
After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach.

I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive.

This commit was SVN r18619.
2008-06-09 14:53:58 +00:00
Rolf vandeVaart
18879285c7 Fix the selection logic to prevent memory leaks. More work may be done in the priority logic but for now we just fix the leaks and preserve current behavior.
This commit fixes trac:1307.

This commit was SVN r18504.

The following Trac tickets were found above:
  Ticket 1307 --> https://svn.open-mpi.org/trac/ompi/ticket/1307
2008-05-27 14:16:39 +00:00
Edgar Gabriel
0500420bec fixing a bug in the inter-communicator scatter operation, where we used
accidentally rcount instead of scounts.

This commit was SVN r18466.
2008-05-20 21:17:19 +00:00
Jeff Squyres
e7ecd56bd2 This commit represents a bunch of work on a Mercurial side branch. As
such, the commit message back to the master SVN repository is fairly
long.

= ORTE Job-Level Output Messages =

Add two new interfaces that should be used for all new code throughout
the ORTE and OMPI layers (we already make the search-and-replace on
the existing ORTE / OMPI layers):

 * orte_output(): (and corresponding friends ORTE_OUTPUT,
   orte_output_verbose, etc.)  This function sends the output directly
   to the HNP for processing as part of a job-specific output
   channel.  It supports all the same outputs as opal_output()
   (syslog, file, stdout, stderr), but for stdout/stderr, the output
   is sent to the HNP for processing and output.  More on this below.
 * orte_show_help(): This function is a drop-in-replacement for
   opal_show_help(), with two differences in functionality:
   1. the rendered text help message output is sent to the HNP for
      display (rather than outputting directly into the process' stderr
      stream)
   1. the HNP detects duplicate help messages and does not display them
      (so that you don't see the same error message N times, once from
      each of your N MPI processes); instead, it counts "new" instances
      of the help message and displays a message every ~5 seconds when
      there are new ones ("I got X new copies of the help message...")

opal_show_help and opal_output still exist, but they only output in
the current process.  The intent for the new orte_* functions is that
they can apply job-level intelligence to the output.  As such, we
recommend that all new ORTE and OMPI code use the new orte_*
functions, not thei opal_* functions.

=== New code ===

For ORTE and OMPI programmers, here's what you need to do differently
in new code:

 * Do not include opal/util/show_help.h or opal/util/output.h.
   Instead, include orte/util/output.h (this one header file has
   declarations for both the orte_output() series of functions and
   orte_show_help()).
 * Effectively s/opal_output/orte_output/gi throughout your code.
   Note that orte_output_open() takes a slightly different argument
   list (as a way to pass data to the filtering stream -- see below),
   so you if explicitly call opal_output_open(), you'll need to
   slightly adapt to the new signature of orte_output_open().
 * Literally s/opal_show_help/orte_show_help/.  The function signature
   is identical.

=== Notes ===

 * orte_output'ing to stream 0 will do similar to what
   opal_output'ing did, so leaving a hard-coded "0" as the first
   argument is safe.
 * For systems that do not use ORTE's RML or the HNP, the effect of
   orte_output_* and orte_show_help will be identical to their opal
   counterparts (the additional information passed to
   orte_output_open() will be lost!).  Indeed, the orte_* functions
   simply become trivial wrappers to their opal_* counterparts.  Note
   that we have not tested this; the code is simple but it is quite
   possible that we mucked something up.

= Filter Framework =

Messages sent view the new orte_* functions described above and
messages output via the IOF on the HNP will now optionally be passed
through a new "filter" framework before being output to
stdout/stderr.  The "filter" OPAL MCA framework is intended to allow
preprocessing to messages before they are sent to their final
destinations.  The first component that was written in the filter
framework was to create an XML stream, segregating all the messages
into different XML tags, etc.  This will allow 3rd party tools to read
the stdout/stderr from the HNP and be able to know exactly what each
text message is (e.g., a help message, another OMPI infrastructure
message, stdout from the user process, stderr from the user process,
etc.).

Filtering is not active by default.  Filter components must be
specifically requested, such as:

{{{
$ mpirun --mca filter xml ...
}}}

There can only be one filter component active.

= New MCA Parameters =

The new functionality described above introduces two new MCA
parameters:

 * '''orte_base_help_aggregate''': Defaults to 1 (true), meaning that
   help messages will be aggregated, as described above.  If set to 0,
   all help messages will be displayed, even if they are duplicates
   (i.e., the original behavior).
 * '''orte_base_show_output_recursions''': An MCA parameter to help
   debug one of the known issues, described below.  It is likely that
   this MCA parameter will disappear before v1.3 final.

= Known Issues =

 * The XML filter component is not complete.  The current output from
   this component is preliminary and not real XML.  A bit more work
   needs to be done to configure.m4 search for an appropriate XML
   library/link it in/use it at run time.
 * There are possible recursion loops in the orte_output() and
   orte_show_help() functions -- e.g., if RML send calls orte_output()
   or orte_show_help().  We have some ideas how to fix these, but
   figured that it was ok to commit before feature freeze with known
   issues.  The code currently contains sub-optimal workarounds so
   that this will not be a problem, but it would be good to actually
   solve the problem rather than have hackish workarounds before v1.3 final.

This commit was SVN r18434.
2008-05-13 20:00:55 +00:00
George Bosilca
a00ca20446 More cleanups.
This commit was SVN r18069.
2008-04-02 06:38:33 +00:00
Jeff Squyres
213b5d5c6e Per long threads on the mailing list and much confusion discussion
about linkers, have all OPAL, ORTE, and OMPI components '''not'' link
against the OPAL, ORTE, or OMPI libraries.

See ttp://www.open-mpi.org/community/lists/users/2007/10/4220.php for
details (or https://svn.open-mpi.org/trac/ompi/wiki/Linkers for a
better-formatted version of the same info).

This commit was SVN r16968.
2007-12-15 13:32:02 +00:00
Brian Barrett
af4e86c25f Update collectives selection logic to allow for multiple components to be
used at nce (up to one unique collective module per collective function).
Matches r15795:15921 of the tmp/bwb-coll-select branch

This commit was SVN r15924.

The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
  r15795
  r15921
2007-08-19 03:37:49 +00:00
Jeff Squyres
51f286d737 Just like r14289 on the ORTE trunk:
Per discussions with Brian and Ralph, make a slight correction in
where components are installed. Use $pkglibdir, not $libdir/openmpi,
so that when compiled in the orte trunk, components are installed to
the right directory (because the component search patch is checking
$pkglibdir).

This commit was SVN r14345.

The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
  r14289
2007-04-12 11:19:42 +00:00
Mohamad Chaarawi
bfaf9d4a12 Added new module for intercomm collectives. This will require an
autogen.

This commit was SVN r14149.
2007-03-27 02:06:42 +00:00