Dave Goodell correctly pointed out that it is unusual to return MPI
error classes from internal ompi functions. Correct this in the RMA
case by adding an internal error code to match MPI_ERR_RMA_SYNC.
This does change OMPI_ERR_MAX. I don't think this will cause any
problems with ABI.
cmr=v1.7.5:reviewer=jsquyres
This commit was SVN r31012.
pkg{data,lib,includedir}, use our own ompi{data,lib,includedir}, which is
always set to {datadir,libdir,includedir}/openmpi. This will keep us from
having help files in prefix/share/open-rte when building without Open MPI,
but in prefix/share/openmpi when building with Open MPI.
This commit was SVN r30140.
arrays.
The MPI 3.0 standard added const to all in buffers in the C bindings. This
commit adds the const keyword and in most cases casts const away. We will
eventually should go through and update the various interfaces (coll, pml,
io, etc) to take the const keyword. The group, comm, win, and datatype
interfaces have been updated with const.
cmr=v1.7.4:ticket=trac:3785:reviewer=jsquyres
This commit was SVN r29266.
The following Trac tickets were found above:
Ticket 3785 --> https://svn.open-mpi.org/trac/ompi/ticket/3785
George and I were talking about ORTE's error handling the other day in regards to the right way to deal with errors in the updated OOB. Specifically, it seemed a bad idea for a library such as ORTE to be aborting the job on its own prerogative. If we lose a connection or cannot send a message, then we really should just report it upwards and let the application and/or upper layers decide what to do about it.
The current code base only allows a single error callback to exist, which seemed unduly limiting. So, based on the conversation, I've modified the errmgr interface to provide a mechanism for registering any number of error handlers (this replaces the current "set_fault_callback" API). When an error occurs, these handlers will be called in order until one responds that the error has been "resolved" - i.e., no further action is required - by returning OMPI_SUCCESS. The default MPI layer error handler is specified to go "last" and calls mpi_abort, so the current "abort" behavior is preserved unless other error handlers are registered.
In the register_callback function, I provide an "order" param so you can specify "this callback must come first" or "this callback must come last". Seemed to me that we will probably have different code areas registering callbacks, and one might require it go first (the default "abort" will always require it go last). So you can append and prepend, or go first. Note that only one registration can declare itself "first" or "last", and since the default "abort" callback automatically takes "last", that one isn't available. :-)
The errhandler callback function passes an opal_pointer_array of structs, each of which contains the name of the proc involved (which can be yourself for internal errors) and the error code. This is a change from the current fault callback which returned an opal_pointer_array of just process names. Rationale is that you might need to see the cause of the error to decide what action to take. I realize that isn't a requirement for remote procs, but remember that we will use the SAME interface to report RTE errors internal to the proc itself. In those cases, you really do need to see the error code. It is legal to pass a NULL for the pointer array (e.g., when reporting an internal failure without error code), so handlers must be prepared for that possibility. If people find that too burdensome, we can remove it.
Should we ever decide to create a separate callback path for internal errors vs remote process failures, or if we decide to do something different based on experience, then we can adjust this API.
This commit was SVN r28852.
ompi_show_help, because opal_show_help is replaced with an
aggregating version when using ORTE, so there's no reason to
directly call orte_show_help.
This commit was SVN r28051.
ompi_mpi_errcodes array to NULL if the index is not MPI_UNDEFINED.
Thanks to Alexey Bayduraev for the patch.
This commit was SVN r26446.
The following Trac tickets were found above:
Ticket 3093 --> https://svn.open-mpi.org/trac/ompi/ticket/3093
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
Roll in the ORTE state machine. Remove last traces of opal_sos. Remove UTK epoch code.
Please see the various emails about the state machine change for details. I'll send something out later with more info on the new arch.
This commit was SVN r26242.
Note that the previous patch allowed the following test to -pass-:
ompi-tests/mpich_tester/mpich_pt2pt/truncmult.c
This patch makes that test -fail- due to the assumption that MPI_Wait will update the status.MPI_ERROR field. In Open MPI we do not do this, so the MPI_ERROR field being inspected will remain set to MPI_ERR_PENDING. See comments in req_wait.c for why we do this.
If we change the test to not inspect the MPI_ERROR field after calling MPI_Wait successfully, then the test would pass correctly with this patch.
This change was made per discussion on the below email thread:
http://www.open-mpi.org/community/lists/devel/2012/03/10753.php
This commit was SVN r26177.
The following SVN revision numbers were found above:
r26172 --> open-mpi/ompi@03a33417d5
* If something goes wrong during ompi_mpi_init, don't erroneously
report that it is illegal to invoke MPI_INIT* before MPI_INIT
* Aggregate help messages when possible when something goes wring
during ompi_mpi_init
This commit was SVN r24492.
error codes correctly again. Also fix a typo.
Reviewed by Jeff Squyres.
This commit was SVN r23531.
The following SVN revision numbers were found above:
r23463 --> open-mpi/ompi@2af3e6e5ae
* ompi_errcode_get_mpi_code() already checks for >0 error codes; the
checks in OMPI_ERRHANDLER_INVOKE, OMPI_ERRHANDLER_CHECK, and
OMPI_ERRHANDLER_RETURN were superfluous.
* Ensure to use/return an OPAL_SOS-decoded value in
ompi_errcode_get_mpi_code().
* Symbols beginning with !__ technically belong in the compiler
namespace; we shouldn't be using those.
* Other minor style updates in ompi_errcode_get_mpi_code().
This commit was SVN r23463.
The fix is to just check if the return value is positive or not, since all the SOS encoded errors are *always* negative.
The real fix (as Ralph points out) is to change these functions (opal_pointer_array_add and mca_base_param*) to return the index as a pointer.
This commit was SVN r23173.
(OMPI_ERR_* = OPAL_SOS_GET_ERR_CODE(ret)), since the return value could be a
SOS-encoded error. The OPAL_SOS_GET_ERR_CODE() takes in a SOS error and returns
back the native error code.
* Since OPAL_SUCCESS is preserved by SOS, also change all calls of the form
(OPAL_ERROR == ret) to (OPAL_SUCCESS != ret). We thus avoid having to
decode 'ret' to get the native error code.
This commit was SVN r23162.
Special-case the before MPI_INIT / after MPI_FINALIZE error messages
so that they can be a bit more clear than the general "an error
occurred" messages that are displayed in the middle of MPI jobs.
This is not really a "bug fix", but it is helpful for usability. I
leave it up to the v1.4 RM's to decide if they want it for the 1.4
series or not.
This commit was SVN r22382.
The following Trac tickets were found above:
Ticket 2158 --> https://svn.open-mpi.org/trac/ompi/ticket/2158
from "MPI_*_errhandler_fn" to "MPI_*_errhandler_function" (and their
corresponding C++ types, too). Also updated the corresponding man
pages, and marked the typedefs to the now-deprecated types as
deprecated.
This commit was SVN r22122.
The following Trac tickets were found above:
Ticket 2060 --> https://svn.open-mpi.org/trac/ompi/ticket/2060
not end up in OPAL
- Will post an updated patch for the OMPI_ALIGNMENT_ parts (within C).
This commit was SVN r21342.
The following SVN revision numbers were found above:
r21330 --> open-mpi/ompi@95596d1814
into the OPAL namespace, eliminating cases like opal/util/arch.c
testing for ompi_fortran_logical_t.
As this is processor- and compiler-related information
(e.g. does the compiler/architecture support REAL*16)
this should have been on the OPAL layer.
- Unifies f77 code using MPI_Flogical instead of opal_fortran_logical_t
- Tested locally (Linux/x86-64) with mpich and intel testsuite
but would like to get this week-ends MTT output
- PLEASE NOTE: configure-internal macro-names and
ompi_cv_ variables have not been changed, so that
external platform (not in contrib/) files still work.
This commit was SVN r21330.
- Delete unnecessary header files using
contrib/check_unnecessary_headers.sh after applying
patches, that include headers, being "lost" due to
inclusion in one of the now deleted headers...
In total 817 files are touched.
In ompi/mpi/c/ header files are moved up into the actual c-file,
where necessary (these are the only additional #include),
otherwise it is only deletions of #include (apart from the above
additions required due to notifier...)
- To get different MCAs (OpenIB, TM, ALPS), an earlier version was
successfully compiled (yesterday) on:
Linux locally using intel-11, gcc-4.3.2 and gcc-SVN + warnings enabled
Smoky cluster (x86-64 running Linux) using PGI-8.0.2 + warnings enabled
Lens cluster (x86-64 running Linux) using Pathscale-3.2 + warnings enabled
This commit was SVN r21096.
- This patch solely _adds_ required headers and is rather localized
The next patch (after RFC) heavily removes headers (based on script)
- ompi/communicator/communicator.h: For sources that use
ompi_mpi_comm_world, don't require them to include "mpi.h"
- ompi/debuggers/ompi_common_dll.c: mca_topo_base_comm_1_0_0_t needs
#include "ompi/mca/topo/topo.h"
- ompi/errhandler/errhandler_predefined.h:
ompi/communicator/communicator.h depends on this header file!
To prevent recursion just have fwd declarations.
#include "ompi/types.h" for fwd declarations of the main structs.
- ompi/mca/btl/btl.h: #include "opal/types.h" for ompi_ptr_t
- ompi/mca/mpool/base/mpool_base_tree.c: We use ompi_free_list_t and
ompi_rb_tree_t, so have the proper classes
- ompi/mca/op/op.h:
Op is pretty self-contained: Nobody up to now has done
#include "opal/class/opal_object.h"
- ompi/mca/osc/pt2pt/osc_pt2pt_replyreq.h:
#include "opal/types.h" for ompi_ptr_t
- ompi/mca/pml/base/base.h:
We use opal_lists
- ompi/mca/pml/dr/pml_dr_vfrag.h:
#include "opal/types.h" for ompi_ptr_t
- ompi/mca/pml/ob1/pml_ob1_hdr.h:
#include "ompi/mca/btl/btl.h" for mca_btl_base_segment_t
- opal/dss/dss_unpack.c:
#include "opal/types.h"
- opal/mca/base/base.h:
#include "opal/util/cmd_line.h" for opal_cmd_line_t
- orte/mca/oob/tcp/oob_tcp.c:
#include "opal/types.h" for opal_socklen_t
- orte/mca/oob/tcp/oob_tcp.h:
#include "opal/threads/threads.h" for opal_thread_t
- orte/mca/oob/tcp/oob_tcp_msg.c:
#include "opal/types.h"
- orte/mca/oob/tcp/oob_tcp_peer.c:
#include "opal/types.h" for opal_socklen_t
- orte/mca/oob/tcp/oob_tcp_send.c:
#include "opal/types.h"
- orte/mca/plm/base/plm_base_proxy.c:
#include "orte/util/name_fns.h" for ORTE_NAME_PRINT
- orte/mca/rml/base/rml_base_receive.c:
#include "opal/util/output.h" for OPAL_OUTPUT_VERBOSE
- orte/mca/rml/oob/rml_oob_recv.c:
#include "opal/types.h" for ompi_iov_base_ptr_t
- orte/mca/rml/oob/rml_oob_send.c:
#include "opal/types.h" for ompi_iov_base_ptr_t
- orte/runtime/orte_data_server.c
#include "opal/util/output.h" for OPAL_OUTPUT_VERBOSE
- orte/runtime/orte_globals.h:
#include "orte/util/name_fns.h" for ORTE_NAME_PRINT
Tested on Linux/x86-64
This commit was SVN r20817.
In case we use memcmp, strlen, strup and friends include <string.h>
Also several constants.h are not included directly
- Let's have mca_topo_base_cart_create return ompi-errors in
ompi/mca/topo/base/topo_base_cart_create.c
This commit was SVN r20773.
Adapt orte_process_info to orte_proc_info, and
change orte_proc_info() to orte_proc_info_init().
- Compiled on linux-x86-64
- Discussed with Ralph
This commit was SVN r20739.
Often, orte/util/show_help.h is included, although no functionality
is required -- instead, most often opal_output.h, or
orte/mca/rml/rml_types.h
Please see orte_show_help_replacement.sh commited next.
- Local compilation (Linux/x86_64) w/ -Wimplicit-function-declaration
actually showed two *missing* #include "orte/util/show_help.h"
in orte/mca/odls/base/odls_base_default_fns.c and
in orte/tools/orte-top/orte-top.c
Manually added these.
Let's have MTT the last word.
This commit was SVN r20557.
