It looks like one help message was accidentally pasted in the middle
of another. Disentangle the two messages from each other, and
slightly tweak the one message to say that the job may also crash (in
addition to hanging).
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
In some rare cases when a process receives the connect ack while
locally updating the peer endpoint structure, we could drop the
incomming connect ack due to the fact that the send handler is
protected with a try lock (on the endpoint) and our initial send
event was not persistent. Making the send event persistent solves
all issues.
This commit fixes a race between a thread calling the tcp btl's
add_procs and a thread processing an incomming connection. The race
occured because the add_procs thread adds a newly created proc object
to the hash table *before* the object is fully initialized. The
connection thread then attempts to use the object before the endpoints
array on the object has beeen allocation. The fix is to only add the
proc to the hash table after it has been completely initialized.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
These macros should really be named OPAL_SUMMARY_*; they're used in
all projects, and therefore should be in the lowest later project (OPAL).
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Added mca parameter to turn progress thread on/off
Add a flag to check if we have btl progress thread.
Added macro for ob1 matching lock.
Update the AUTHORS file.
All BTL-only operations (basically all data movements
with the exception of the matching operation) can now
be handled for the TCP BTL by a progress thread.
This commit adds two m4 macros: OPAL_SUMMARY_ADD, OPAL_SUMMARY_PRINT.
OPAL_SUMMARY_ADD adds an item to a section in the summary. For example
OPAL_SUMMARY_ADD([[Transports]],[[Foo]],...,[yes]) will add the
following to the summary:
Transports
-----------------------
Foo: yes
With this commit two sections are added: Transports, Resource Managers.
The OPAL_SUMMARY_PRINT macro is called after AC_OUTPUT and prints out
some information about the build (version, projects, etc) and then
the summarys sections. It will additionally print a warning if
internal debugging is enabled.
Example output:
Open MPI configuration:
-----------------------
Version: 3.0.0 a1
Build Open Platform Abstration project: yes
Build Open Runtime project: yes
Build Open MPI project: yes
Build Open SHMEM project: no
MPI C++ bindings (deprecated): no
MPI Fortran bindings: mpif.h, use mpi, use mpi_f08
Debug build: yes
Transports
-----------------------
Cray uGNI (Gemini/Aries): no
Intel Omnipath (PSM2): no
KNEM Shared Memory: no
Linux CMA IPC: no
Mellanox MXM: no
Open UCX: no
OpenFabrics libfabric: no
OpenFabrics Verbs: no
portals4: no
QLogic Infinipath (PSM): no
tcp: yes
XPMEM Shared Memory: no
Resource Managers
-----------------------
Cray Alps: no
Grid Engine: no
LSF: no
Slurm: yes
Torque: yes
INTERNAL DEBUGGING IS ENABLED. DO NOT USE THIS BUILD FOR PERFORMANCE MEASUREMENTS!
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
This commit makes two changes to the tcp btl:
- If a tcp proc does not exist when handling a new connection create
a new proc and use it. The current implementation uses the
opal_proc_by_name() function to get the opal_proc_t then calls
add_procs on all btl modules. It may be sufficient to just call
add_procs until an endpoint is created so this may change somewhat.
- In add_procs add a check for an existing endpoint before creating
one.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit updates each non-compliant btl to send the
MCA_BTL_FLAGS_SEND flag in the btl_flags field if send is
supported. This fixes a problem identified after the latest bml/r2
update which excplicitly checks for the send flag.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Bring Slurm PMI-1 component online
Bring the s2 component online
Little cleanup - let the various PMIx modules set the process name during init, and then just raise it up to the ORTE level. Required as the different PMI environments all pass the jobid in different ways.
Bring the OMPI pubsub/pmi component online
Get comm_spawn working again
Ensure we always provide a cpuset, even if it is NULL
pmix/cray: adjust cray pmix component for pmix
Make changes so cray pmix can work within the integrated
ompi/pmix framework.
Bring singletons back online. Implement the comm_spawn operation using pmix - not tested yet
Cleanup comm_spawn - procs now starting, error in connect_accept
Complete integration
This commit does two things. It removes checks for C99 required
headers (stdlib.h, string.h, signal.h, etc). Additionally it removes
definitions for required C99 types (intptr_t, int64_t, int32_t, etc).
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
Also add another (superflous but symmetric) continue statement.
This missing "continue" statement allows IPv4 "private network"
matches to fall through and allow IPv6 matches to be made -- thereby
overriding the IPv4 match that was already made.
Fixes#585 (although several of the other issues identified on #585
still exist, the primary / initial bug that was reported there is now
fixed).
Use of the old ompi_free_list_t and ompi_free_list_item_t is
deprecated. These classes will be removed in a future commit.
This commit updates the entire code base to use opal_free_list_t and
opal_free_list_item_t.
Notes:
OMPI_FREE_LIST_*_MT -> opal_free_list_* (uses opal_using_threads ())
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit adds an owner file in each of the component directories
for each framework. This allows for a simple script to parse
the contents of the files and generate, among other things, tables
to be used on the project's wiki page. Currently there are two
"fields" in the file, an owner and a status. A tool to parse
the files and generate tables for the wiki page will be added
in a subsequent commit.
while cleaning up after receiving a zero byte on the connect socket
(localyy started connection), while another was trying to accept a
new connection from the same peer. Create a zero-timed event and
delocalize the accept into a timer_event.
Add support for registering an error callback, that can be used when a
connection is discovered as failed during the initialization process.
was quite subtle, and only happened on the process with the smallest
guid (as this process will tear down the connection created locally and
replace it with the result of accept). If multiple threads are active in
the system, the deadlock occurs during the recv event deletion as one
thread will hold the recv event lock of the endpoint and try to access
the TCP event base lock, while the other thread will hold the TCP event
base lock while trying to access the recv event lock (in case data is
available on the socket).
The proposed solution let the event callback fail to process the data,
preventing the deadlock and allowing the other thread to always complete
it's job. As the event is not execute the same triggered will trigger
again at the next opportunity, so this solution introduce a minimal
delay in the connection establishement.
inserted in the ompi_proc_list as soon as it is created and it
is removed only upon the call to the destructor. In ompi_proc_finalize
we loop over all procs in ompi_proc_finalize and release them once.
However, as a proc is not removed from this list right away, we
decrease the ref count for each proc until it reach zero and the
proc is finally removed. Thus, we cannot clean the BML/BTL after
the call the ompi_proc_finalize.
A quick fix is to delay the call to ompi_proc_finalize until all
other frameworks have been finalized, and then the behavior
depicted above will give the expected outcome.
structure
This structure member was originally used to specify the remote segment
for an RDMA operation. Since the new btl interface no longer uses
desriptors for RDMA this member no longer has a purpose. In addition
to removing these members the local segment information has been
renamed to des_segments/des_segment_count.
We recognize that this means other users of OPAL will need to "wrap" the opal_process_name_t if they desire to abstract it in some fashion. This is regrettable, and we are looking at possible alternatives that might mitigate that requirement. Meantime, however, we have to put the needs of the OMPI community first, and are taking this step to restore hetero and SPARC support.
These two macros set the prefix for the OPAL and ORTE libraries,
respectively. Specifically, the OPAL library will be named
libPREFIXopen-pal.la and the ORTE library will be named
libPREFIXopen-rte.la.
These macros must be called, even if the prefix argument is empty.
The intent is that Open MPI will call these macros with an empty
prefix, but other projects (such as ORCM) will call these macros with
a non-empty prefix. For example, ORCM libraries can be named
liborcm-open-pal.la and liborcm-open-rte.la.
This scheme is necessary to allow running Open MPI applications under
systems that use their own versions of ORTE and OPAL. For example,
when running MPI applications under ORTE, if the ORTE and OPAL
libraries between OMPI and ORCM are not identical (which, because they
are released at different times, are likely to be different), we need
to ensure that the OMPI applications link against their ORTE and OPAL
libraries, but the ORCM executables link against their ORTE and OPAL
libraries.
Properly setup the opal_process_info structure early in the initialization procedure. Define the local hostname right at the beginning of opal_init so all parts of opal can use it. Overlay that during orte_init as the user may choose to remove fqdn and strip prefixes during that time. Setup the job_session_dir and other such info immediately when it becomes available during orte_init.
WHAT: Merge the PMIx branch into the devel repo, creating a new
OPAL “lmix” framework to abstract PMI support for all RTEs.
Replace the ORTE daemon-level collectives with a new PMIx
server and update the ORTE grpcomm framework to support
server-to-server collectives
WHY: We’ve had problems dealing with variations in PMI implementations,
and need to extend the existing PMI definitions to meet exascale
requirements.
WHEN: Mon, Aug 25
WHERE: https://github.com/rhc54/ompi-svn-mirror.git
Several community members have been working on a refactoring of the current PMI support within OMPI. Although the APIs are common, Slurm and Cray implement a different range of capabilities, and package them differently. For example, Cray provides an integrated PMI-1/2 library, while Slurm separates the two and requires the user to specify the one to be used at runtime. In addition, several bugs in the Slurm implementations have caused problems requiring extra coding.
All this has led to a slew of #if’s in the PMI code and bugs when the corner-case logic for one implementation accidentally traps the other. Extending this support to other implementations would have increased this complexity to an unacceptable level.
Accordingly, we have:
* created a new OPAL “pmix” framework to abstract the PMI support, with separate components for Cray, Slurm PMI-1, and Slurm PMI-2 implementations.
* Replaced the current ORTE grpcomm daemon-based collective operation with an integrated PMIx server, and updated the grpcomm APIs to provide more flexible, multi-algorithm support for collective operations. At this time, only the xcast and allgather operations are supported.
* Replaced the current global collective id with a signature based on the names of the participating procs. The allows an unlimited number of collectives to be executed by any group of processes, subject to the requirement that only one collective can be active at a time for a unique combination of procs. Note that a proc can be involved in any number of simultaneous collectives - it is the specific combination of procs that is subject to the constraint
* removed the prior OMPI/OPAL modex code
* added new macros for executing modex send/recv to simplify use of the new APIs. The send macros allow the caller to specify whether or not the BTL supports async modex operations - if so, then the non-blocking “fence” operation is used, if the active PMIx component supports it. Otherwise, the default is a full blocking modex exchange as we currently perform.
* retained the current flag that directs us to use a blocking fence operation, but only to retrieve data upon demand
This commit was SVN r32570.
WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL
All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic.
This commit was SVN r32317.
