diff --git a/contrib/Makefile.am b/contrib/Makefile.am index ec43eb9ce2..74b560ee53 100644 --- a/contrib/Makefile.am +++ b/contrib/Makefile.am @@ -13,6 +13,7 @@ # Copyright (c) 2010 IBM Corporation. All rights reserved. # Copyright (c) 2010-2011 Oak Ridge National Labs. All rights reserved. # Copyright (c) 2013 Los Alamos National Security, Inc. All rights reserved. +# Copyright (c) 2013 Intel Corporation. All rights reserved. # $COPYRIGHT$ # # Additional copyrights may follow @@ -104,21 +105,13 @@ EXTRA_DIST = \ platform/ibm/debug-ppc64-gcc \ platform/ibm/optimized-ppc32-gcc \ platform/ibm/optimized-ppc64-gcc \ - platform/greenplum/bend/mac \ - platform/greenplum/bend/mac.conf \ - platform/greenplum/bend/linux \ - platform/greenplum/bend/linux.conf \ - platform/greenplum/bend/mac-optimized \ - platform/greenplum/bend/mac-optimized.conf \ - platform/greenplum/bend/linux-optimized \ - platform/greenplum/bend/linux-optimized.conf \ - platform/greenplum/mrplus/mac \ - platform/greenplum/mrplus/mac.conf \ - platform/greenplum/mrplus/linux \ - platform/greenplum/mrplus/linux.conf \ - platform/greenplum/mrplus/mac-optimized \ - platform/greenplum/mrplus/mac-optimized.conf \ - platform/greenplum/mrplus/linux-optimized \ - platform/greenplum/mrplus/linux-optimized.conf + platform/intel/bend/mac \ + platform/intel/bend/mac.conf \ + platform/intel/bend/linux \ + platform/intel/bend/linux.conf \ + platform/intel/bend/mac-optimized \ + platform/intel/bend/mac-optimized.conf \ + platform/intel/bend/linux-optimized \ + platform/intel/bend/linux-optimized.conf \ dist_pkgdata_DATA = openmpi-valgrind.supp diff --git a/contrib/platform/greenplum/mrplus/linux b/contrib/platform/greenplum/mrplus/linux deleted file mode 100644 index 9c14ca4c52..0000000000 --- a/contrib/platform/greenplum/mrplus/linux +++ /dev/null @@ -1,30 +0,0 @@ -enable_event_thread_support=yes -enable_opal_multi_threads=yes -enable_orte_progress_threads=yes -enable_ft_thread=no -enable_mem_debug=no -enable_mem_profile=no -enable_debug_symbols=yes -enable_binaries=yes -enable_heterogeneous=no -enable_picky=yes -enable_debug=yes -enable_shared=yes -enable_static=no -enable_memchecker=no -enable_ipv6=no -enable_mpi_fortran=no -enable_mpi_cxx=no -enable_mpi_cxx_seek=no -enable_cxx_exceptions=no -enable_mpi_java=yes -enable_io_romio=no -enable_vt=no -enable_mca_no_build=crs,memchecker,snapc,crcp,rml-ftrm,filem-rsh -enable_contrib_no_build=libnbc,vt -with_memory_manager=no -with_tm=no -with_slurm=no -with_devel_headers=yes -with_portals=no -with_valgrind=no diff --git a/contrib/platform/greenplum/mrplus/linux-optimized b/contrib/platform/greenplum/mrplus/linux-optimized deleted file mode 100644 index ddb5611fdb..0000000000 --- a/contrib/platform/greenplum/mrplus/linux-optimized +++ /dev/null @@ -1,30 +0,0 @@ -enable_event_thread_support=yes -enable_opal_multi_threads=yes -enable_orte_progress_threads=yes -enable_ft_thread=no -enable_mem_debug=no -enable_mem_profile=no -enable_debug_symbols=no -enable_binaries=yes -enable_heterogeneous=no -enable_picky=no -enable_debug=no -enable_shared=yes -enable_static=no -enable_memchecker=no -enable_ipv6=no -enable_mpi_fortran=no -enable_mpi_cxx=no -enable_mpi_cxx_seek=no -enable_cxx_exceptions=no -enable_mpi_java=yes -enable_io_romio=no -enable_vt=no -enable_mca_no_build=crs,memchecker,snapc,crcp,rml-ftrm,filem-rsh -enable_contrib_no_build=libnbc,vt -with_memory_manager=no -with_tm=no -with_slurm=no -with_devel_headers=yes -with_portals=no -with_valgrind=no diff --git a/contrib/platform/greenplum/mrplus/linux-optimized.conf b/contrib/platform/greenplum/mrplus/linux-optimized.conf deleted file mode 100644 index 0e767d9c2e..0000000000 --- a/contrib/platform/greenplum/mrplus/linux-optimized.conf +++ /dev/null @@ -1,87 +0,0 @@ -# -# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana -# University Research and Technology -# Corporation. All rights reserved. -# Copyright (c) 2004-2005 The University of Tennessee and The University -# of Tennessee Research Foundation. All rights -# reserved. -# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart, -# University of Stuttgart. All rights reserved. -# Copyright (c) 2004-2005 The Regents of the University of California. -# All rights reserved. -# Copyright (c) 2006 Cisco Systems, Inc. All rights reserved. -# $COPYRIGHT$ -# -# Additional copyrights may follow -# -# $HEADER$ -# - -# This is the default system-wide MCA parameters defaults file. -# Specifically, the MCA parameter "mca_param_files" defaults to a -# value of -# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf" -# (this file is the latter of the two). So if the default value of -# mca_param_files is not changed, this file is used to set system-wide -# MCA parameters. This file can therefore be used to set system-wide -# default MCA parameters for all users. Of course, users can override -# these values if they want, but this file is an excellent location -# for setting system-specific MCA parameters for those users who don't -# know / care enough to investigate the proper values for them. - -# Note that this file is only applicable where it is visible (in a -# filesystem sense). Specifically, MPI processes each read this file -# during their startup to determine what default values for MCA -# parameters should be used. mpirun does not bundle up the values in -# this file from the node where it was run and send them to all nodes; -# the default value decisions are effectively distributed. Hence, -# these values are only applicable on nodes that "see" this file. If -# $sysconf is a directory on a local disk, it is likely that changes -# to this file will need to be propagated to other nodes. If $sysconf -# is a directory that is shared via a networked filesystem, changes to -# this file will be visible to all nodes that share this $sysconf. - -# The format is straightforward: one per line, mca_param_name = -# rvalue. Quoting is ignored (so if you use quotes or escape -# characters, they'll be included as part of the value). For example: - -# Disable run-time MPI parameter checking -# mpi_param_check = 0 - -# Note that the value "~/" will be expanded to the current user's home -# directory. For example: - -# Change component loading path -# component_path = /usr/local/lib/openmpi:~/my_openmpi_components - -# See "ompi_info --param all all" for a full listing of Open MPI MCA -# parameters available and their default values. -# - -# setup for MapReduce behavior -orte_staged_execution = 1 -filem_raw_flatten_directory_trees = 1 -orte_set_default_slots = cores -orte_soft_locations = 1 -orte_allowed_exit_without_sync = 1 -orte_retain_aliases = 1 -dfs_orted_num_worker_threads = 4 - -# Basic behavior to smooth startup -mca_base_component_show_load_errors = 1 -mpi_param_check = 0 -orte_abort_timeout = 10 -hwloc_base_mem_bind_failure_action = silent - -## Protect the shared file systems - -## Add the interface for out-of-band communication -## and set it up -oob_tcp_peer_retries = 120 -#oob_tcp_connect_timeout=600 - -## Define the MPI interconnects -btl = sm,tcp,self - -## Setup shared memory -btl_sm_free_list_max = 768 diff --git a/contrib/platform/greenplum/mrplus/linux.conf b/contrib/platform/greenplum/mrplus/linux.conf deleted file mode 100644 index 0e767d9c2e..0000000000 --- a/contrib/platform/greenplum/mrplus/linux.conf +++ /dev/null @@ -1,87 +0,0 @@ -# -# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana -# University Research and Technology -# Corporation. All rights reserved. -# Copyright (c) 2004-2005 The University of Tennessee and The University -# of Tennessee Research Foundation. All rights -# reserved. -# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart, -# University of Stuttgart. All rights reserved. -# Copyright (c) 2004-2005 The Regents of the University of California. -# All rights reserved. -# Copyright (c) 2006 Cisco Systems, Inc. All rights reserved. -# $COPYRIGHT$ -# -# Additional copyrights may follow -# -# $HEADER$ -# - -# This is the default system-wide MCA parameters defaults file. -# Specifically, the MCA parameter "mca_param_files" defaults to a -# value of -# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf" -# (this file is the latter of the two). So if the default value of -# mca_param_files is not changed, this file is used to set system-wide -# MCA parameters. This file can therefore be used to set system-wide -# default MCA parameters for all users. Of course, users can override -# these values if they want, but this file is an excellent location -# for setting system-specific MCA parameters for those users who don't -# know / care enough to investigate the proper values for them. - -# Note that this file is only applicable where it is visible (in a -# filesystem sense). Specifically, MPI processes each read this file -# during their startup to determine what default values for MCA -# parameters should be used. mpirun does not bundle up the values in -# this file from the node where it was run and send them to all nodes; -# the default value decisions are effectively distributed. Hence, -# these values are only applicable on nodes that "see" this file. If -# $sysconf is a directory on a local disk, it is likely that changes -# to this file will need to be propagated to other nodes. If $sysconf -# is a directory that is shared via a networked filesystem, changes to -# this file will be visible to all nodes that share this $sysconf. - -# The format is straightforward: one per line, mca_param_name = -# rvalue. Quoting is ignored (so if you use quotes or escape -# characters, they'll be included as part of the value). For example: - -# Disable run-time MPI parameter checking -# mpi_param_check = 0 - -# Note that the value "~/" will be expanded to the current user's home -# directory. For example: - -# Change component loading path -# component_path = /usr/local/lib/openmpi:~/my_openmpi_components - -# See "ompi_info --param all all" for a full listing of Open MPI MCA -# parameters available and their default values. -# - -# setup for MapReduce behavior -orte_staged_execution = 1 -filem_raw_flatten_directory_trees = 1 -orte_set_default_slots = cores -orte_soft_locations = 1 -orte_allowed_exit_without_sync = 1 -orte_retain_aliases = 1 -dfs_orted_num_worker_threads = 4 - -# Basic behavior to smooth startup -mca_base_component_show_load_errors = 1 -mpi_param_check = 0 -orte_abort_timeout = 10 -hwloc_base_mem_bind_failure_action = silent - -## Protect the shared file systems - -## Add the interface for out-of-band communication -## and set it up -oob_tcp_peer_retries = 120 -#oob_tcp_connect_timeout=600 - -## Define the MPI interconnects -btl = sm,tcp,self - -## Setup shared memory -btl_sm_free_list_max = 768 diff --git a/contrib/platform/greenplum/mrplus/mac b/contrib/platform/greenplum/mrplus/mac deleted file mode 100644 index d040db5433..0000000000 --- a/contrib/platform/greenplum/mrplus/mac +++ /dev/null @@ -1,28 +0,0 @@ -enable_event_thread_support=yes -enable_opal_multi_threads=yes -enable_orte_progress_threads=yes -enable_mem_debug=yes -enable_mem_profile=no -enable_debug_symbols=yes -enable_binaries=yes -enable_heterogeneous=no -enable_picky=yes -enable_debug=yes -enable_shared=yes -enable_static=no -enable_io_romio=no -enable_ipv6=no -enable_mpi_fortran=no -enable_mpi_cxx=no -enable_mpi_cxx_seek=no -enable_mpi_java=yes -enable_memchecker=no -enable_vt=no -enable_mca_no_build=crs,memchecker,snapc,crcp,rml-ftrm,filem-rsh -enable_contrib_no_build=libnbc,vt -with_memory_manager=no -with_devel_headers=yes -with_xgrid=no -with_slurm=no -with_jdk_bindir=/usr/bin -with_jdk_headers=/System/Library/Frameworks/JavaVM.framework/Versions/Current/Headers diff --git a/contrib/platform/greenplum/mrplus/mac-optimized b/contrib/platform/greenplum/mrplus/mac-optimized deleted file mode 100644 index aa806352ec..0000000000 --- a/contrib/platform/greenplum/mrplus/mac-optimized +++ /dev/null @@ -1,28 +0,0 @@ -enable_event_thread_support=yes -enable_opal_multi_threads=yes -enable_orte_progress_threads=yes -enable_mem_debug=no -enable_mem_profile=no -enable_debug_symbols=no -enable_binaries=yes -enable_heterogeneous=no -enable_picky=no -enable_debug=no -enable_shared=yes -enable_static=no -enable_io_romio=no -enable_ipv6=no -enable_mpi_fortran=no -enable_mpi_cxx=no -enable_mpi_cxx_seek=no -enable_mpi_java=yes -enable_memchecker=no -enable_vt=no -enable_mca_no_build=crs,memchecker,snapc,crcp,rml-ftrm,filem-rsh -enable_contrib_no_build=libnbc,vt -with_memory_manager=no -with_devel_headers=yes -with_xgrid=no -with_slurm=no -with_jdk_bindir=/usr/bin -with_jdk_headers=/System/Library/Frameworks/JavaVM.framework/Versions/Current/Headers diff --git a/contrib/platform/greenplum/mrplus/mac-optimized.conf b/contrib/platform/greenplum/mrplus/mac-optimized.conf deleted file mode 100644 index 0e767d9c2e..0000000000 --- a/contrib/platform/greenplum/mrplus/mac-optimized.conf +++ /dev/null @@ -1,87 +0,0 @@ -# -# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana -# University Research and Technology -# Corporation. All rights reserved. -# Copyright (c) 2004-2005 The University of Tennessee and The University -# of Tennessee Research Foundation. All rights -# reserved. -# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart, -# University of Stuttgart. All rights reserved. -# Copyright (c) 2004-2005 The Regents of the University of California. -# All rights reserved. -# Copyright (c) 2006 Cisco Systems, Inc. All rights reserved. -# $COPYRIGHT$ -# -# Additional copyrights may follow -# -# $HEADER$ -# - -# This is the default system-wide MCA parameters defaults file. -# Specifically, the MCA parameter "mca_param_files" defaults to a -# value of -# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf" -# (this file is the latter of the two). So if the default value of -# mca_param_files is not changed, this file is used to set system-wide -# MCA parameters. This file can therefore be used to set system-wide -# default MCA parameters for all users. Of course, users can override -# these values if they want, but this file is an excellent location -# for setting system-specific MCA parameters for those users who don't -# know / care enough to investigate the proper values for them. - -# Note that this file is only applicable where it is visible (in a -# filesystem sense). Specifically, MPI processes each read this file -# during their startup to determine what default values for MCA -# parameters should be used. mpirun does not bundle up the values in -# this file from the node where it was run and send them to all nodes; -# the default value decisions are effectively distributed. Hence, -# these values are only applicable on nodes that "see" this file. If -# $sysconf is a directory on a local disk, it is likely that changes -# to this file will need to be propagated to other nodes. If $sysconf -# is a directory that is shared via a networked filesystem, changes to -# this file will be visible to all nodes that share this $sysconf. - -# The format is straightforward: one per line, mca_param_name = -# rvalue. Quoting is ignored (so if you use quotes or escape -# characters, they'll be included as part of the value). For example: - -# Disable run-time MPI parameter checking -# mpi_param_check = 0 - -# Note that the value "~/" will be expanded to the current user's home -# directory. For example: - -# Change component loading path -# component_path = /usr/local/lib/openmpi:~/my_openmpi_components - -# See "ompi_info --param all all" for a full listing of Open MPI MCA -# parameters available and their default values. -# - -# setup for MapReduce behavior -orte_staged_execution = 1 -filem_raw_flatten_directory_trees = 1 -orte_set_default_slots = cores -orte_soft_locations = 1 -orte_allowed_exit_without_sync = 1 -orte_retain_aliases = 1 -dfs_orted_num_worker_threads = 4 - -# Basic behavior to smooth startup -mca_base_component_show_load_errors = 1 -mpi_param_check = 0 -orte_abort_timeout = 10 -hwloc_base_mem_bind_failure_action = silent - -## Protect the shared file systems - -## Add the interface for out-of-band communication -## and set it up -oob_tcp_peer_retries = 120 -#oob_tcp_connect_timeout=600 - -## Define the MPI interconnects -btl = sm,tcp,self - -## Setup shared memory -btl_sm_free_list_max = 768 diff --git a/contrib/platform/greenplum/mrplus/mac.conf b/contrib/platform/greenplum/mrplus/mac.conf deleted file mode 100644 index 0e767d9c2e..0000000000 --- a/contrib/platform/greenplum/mrplus/mac.conf +++ /dev/null @@ -1,87 +0,0 @@ -# -# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana -# University Research and Technology -# Corporation. All rights reserved. -# Copyright (c) 2004-2005 The University of Tennessee and The University -# of Tennessee Research Foundation. All rights -# reserved. -# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart, -# University of Stuttgart. All rights reserved. -# Copyright (c) 2004-2005 The Regents of the University of California. -# All rights reserved. -# Copyright (c) 2006 Cisco Systems, Inc. All rights reserved. -# $COPYRIGHT$ -# -# Additional copyrights may follow -# -# $HEADER$ -# - -# This is the default system-wide MCA parameters defaults file. -# Specifically, the MCA parameter "mca_param_files" defaults to a -# value of -# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf" -# (this file is the latter of the two). So if the default value of -# mca_param_files is not changed, this file is used to set system-wide -# MCA parameters. This file can therefore be used to set system-wide -# default MCA parameters for all users. Of course, users can override -# these values if they want, but this file is an excellent location -# for setting system-specific MCA parameters for those users who don't -# know / care enough to investigate the proper values for them. - -# Note that this file is only applicable where it is visible (in a -# filesystem sense). Specifically, MPI processes each read this file -# during their startup to determine what default values for MCA -# parameters should be used. mpirun does not bundle up the values in -# this file from the node where it was run and send them to all nodes; -# the default value decisions are effectively distributed. Hence, -# these values are only applicable on nodes that "see" this file. If -# $sysconf is a directory on a local disk, it is likely that changes -# to this file will need to be propagated to other nodes. If $sysconf -# is a directory that is shared via a networked filesystem, changes to -# this file will be visible to all nodes that share this $sysconf. - -# The format is straightforward: one per line, mca_param_name = -# rvalue. Quoting is ignored (so if you use quotes or escape -# characters, they'll be included as part of the value). For example: - -# Disable run-time MPI parameter checking -# mpi_param_check = 0 - -# Note that the value "~/" will be expanded to the current user's home -# directory. For example: - -# Change component loading path -# component_path = /usr/local/lib/openmpi:~/my_openmpi_components - -# See "ompi_info --param all all" for a full listing of Open MPI MCA -# parameters available and their default values. -# - -# setup for MapReduce behavior -orte_staged_execution = 1 -filem_raw_flatten_directory_trees = 1 -orte_set_default_slots = cores -orte_soft_locations = 1 -orte_allowed_exit_without_sync = 1 -orte_retain_aliases = 1 -dfs_orted_num_worker_threads = 4 - -# Basic behavior to smooth startup -mca_base_component_show_load_errors = 1 -mpi_param_check = 0 -orte_abort_timeout = 10 -hwloc_base_mem_bind_failure_action = silent - -## Protect the shared file systems - -## Add the interface for out-of-band communication -## and set it up -oob_tcp_peer_retries = 120 -#oob_tcp_connect_timeout=600 - -## Define the MPI interconnects -btl = sm,tcp,self - -## Setup shared memory -btl_sm_free_list_max = 768 diff --git a/contrib/platform/greenplum/nmon/linux b/contrib/platform/greenplum/nmon/linux deleted file mode 100644 index fa4f0c9861..0000000000 --- a/contrib/platform/greenplum/nmon/linux +++ /dev/null @@ -1,32 +0,0 @@ -enable_event_thread_support=yes -enable_opal_multi_threads=yes -enable_orte_progress_threads=yes -enable_sensors=yes -enable_ft_thread=no -enable_mem_debug=no -enable_mem_profile=no -enable_debug_symbols=yes -enable_binaries=yes -enable_heterogeneous=no -enable_picky=yes -enable_debug=yes -enable_shared=yes -enable_static=no -enable_memchecker=no -enable_ipv6=no -enable_mpi_fortran=no -enable_mpi_cxx=no -enable_mpi_cxx_seek=no -enable_cxx_exceptions=no -enable_mpi_java=yes -enable_io_romio=no -enable_vt=no -enable_mca_no_build=crs,memchecker,snapc,crcp,rml-ftrm,filem-rsh -enable_contrib_no_build=libnbc,vt -with_memory_manager=no -with_tm=no -with_slurm=no -with_devel_headers=yes -with_portals=no -with_valgrind=no -with_sqlite3=no diff --git a/contrib/platform/greenplum/nmon/linux.conf b/contrib/platform/greenplum/nmon/linux.conf deleted file mode 100644 index ba6d3c4fa5..0000000000 --- a/contrib/platform/greenplum/nmon/linux.conf +++ /dev/null @@ -1,84 +0,0 @@ -# -# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana -# University Research and Technology -# Corporation. All rights reserved. -# Copyright (c) 2004-2005 The University of Tennessee and The University -# of Tennessee Research Foundation. All rights -# reserved. -# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart, -# University of Stuttgart. All rights reserved. -# Copyright (c) 2004-2005 The Regents of the University of California. -# All rights reserved. -# Copyright (c) 2006 Cisco Systems, Inc. All rights reserved. -# Copyright (c) 2012 Los Alamos National Security, LLC. All rights -# reserved. -# $COPYRIGHT$ -# -# Additional copyrights may follow -# -# $HEADER$ -# - -# This is the default system-wide MCA parameters defaults file. -# Specifically, the MCA parameter "mca_param_files" defaults to a -# value of -# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf" -# (this file is the latter of the two). So if the default value of -# mca_param_files is not changed, this file is used to set system-wide -# MCA parameters. This file can therefore be used to set system-wide -# default MCA parameters for all users. Of course, users can override -# these values if they want, but this file is an excellent location -# for setting system-specific MCA parameters for those users who don't -# know / care enough to investigate the proper values for them. - -# Note that this file is only applicable where it is visible (in a -# filesystem sense). Specifically, MPI processes each read this file -# during their startup to determine what default values for MCA -# parameters should be used. mpirun does not bundle up the values in -# this file from the node where it was run and send them to all nodes; -# the default value decisions are effectively distributed. Hence, -# these values are only applicable on nodes that "see" this file. If -# $sysconf is a directory on a local disk, it is likely that changes -# to this file will need to be propagated to other nodes. If $sysconf -# is a directory that is shared via a networked filesystem, changes to -# this file will be visible to all nodes that share this $sysconf. - -# The format is straightforward: one per line, mca_param_name = -# rvalue. Quoting is ignored (so if you use quotes or escape -# characters, they'll be included as part of the value). For example: - -# Disable run-time MPI parameter checking -# mpi_param_check = 0 - -# Note that the value "~/" will be expanded to the current user's home -# directory. For example: - -# Change component loading path -# component_path = /usr/local/lib/openmpi:~/my_openmpi_components - -# See "ompi_info --param all all" for a full listing of Open MPI MCA -# parameters available and their default values. -# - -# hdmon behavior -sensor_sample_rate = 1.0 -sensor_log_samples = 1 - -# Basic behavior to smooth startup -mca_component_show_load_errors = 1 -mpi_param_check = 0 -orte_abort_timeout = 10 -hwloc_base_mem_bind_failure_action = silent - -## Protect the shared file systems - -## Add the interface for out-of-band communication -## and set it up -oob_tcp_peer_retries = 120 -#oob_tcp_connect_timeout=600 - -## Define the MPI interconnects -btl = sm,tcp,self - -## Setup shared memory -btl_sm_free_list_max = 768 diff --git a/contrib/platform/greenplum/nmon/mac b/contrib/platform/greenplum/nmon/mac deleted file mode 100644 index aa90f41b3b..0000000000 --- a/contrib/platform/greenplum/nmon/mac +++ /dev/null @@ -1,29 +0,0 @@ -enable_event_thread_support=yes -enable_opal_multi_threads=yes -enable_orte_progress_threads=yes -enable_sensors=yes -enable_mem_debug=yes -enable_mem_profile=no -enable_debug_symbols=yes -enable_binaries=yes -enable_heterogeneous=no -enable_picky=yes -enable_debug=yes -enable_shared=yes -enable_static=no -enable_io_romio=no -enable_ipv6=no -enable_mpi_fortran=no -enable_mpi_cxx=no -enable_mpi_cxx_seek=no -enable_mpi_java=yes -enable_memchecker=no -enable_vt=no -enable_mca_no_build=crs,memchecker,snapc,crcp,rml-ftrm,filem,dfs,sstore -enable_contrib_no_build=libnbc,vt -with_memory_manager=no -with_devel_headers=yes -with_xgrid=no -with_slurm=no -with_jdk_bindir=/usr/bin -with_jdk_headers=/System/Library/Frameworks/JavaVM.framework/Versions/Current/Headers diff --git a/contrib/platform/greenplum/nmon/mac.conf b/contrib/platform/greenplum/nmon/mac.conf deleted file mode 100644 index ba6d3c4fa5..0000000000 --- a/contrib/platform/greenplum/nmon/mac.conf +++ /dev/null @@ -1,84 +0,0 @@ -# -# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana -# University Research and Technology -# Corporation. All rights reserved. -# Copyright (c) 2004-2005 The University of Tennessee and The University -# of Tennessee Research Foundation. All rights -# reserved. -# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart, -# University of Stuttgart. All rights reserved. -# Copyright (c) 2004-2005 The Regents of the University of California. -# All rights reserved. -# Copyright (c) 2006 Cisco Systems, Inc. All rights reserved. -# Copyright (c) 2012 Los Alamos National Security, LLC. All rights -# reserved. -# $COPYRIGHT$ -# -# Additional copyrights may follow -# -# $HEADER$ -# - -# This is the default system-wide MCA parameters defaults file. -# Specifically, the MCA parameter "mca_param_files" defaults to a -# value of -# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf" -# (this file is the latter of the two). So if the default value of -# mca_param_files is not changed, this file is used to set system-wide -# MCA parameters. This file can therefore be used to set system-wide -# default MCA parameters for all users. Of course, users can override -# these values if they want, but this file is an excellent location -# for setting system-specific MCA parameters for those users who don't -# know / care enough to investigate the proper values for them. - -# Note that this file is only applicable where it is visible (in a -# filesystem sense). Specifically, MPI processes each read this file -# during their startup to determine what default values for MCA -# parameters should be used. mpirun does not bundle up the values in -# this file from the node where it was run and send them to all nodes; -# the default value decisions are effectively distributed. Hence, -# these values are only applicable on nodes that "see" this file. If -# $sysconf is a directory on a local disk, it is likely that changes -# to this file will need to be propagated to other nodes. If $sysconf -# is a directory that is shared via a networked filesystem, changes to -# this file will be visible to all nodes that share this $sysconf. - -# The format is straightforward: one per line, mca_param_name = -# rvalue. Quoting is ignored (so if you use quotes or escape -# characters, they'll be included as part of the value). For example: - -# Disable run-time MPI parameter checking -# mpi_param_check = 0 - -# Note that the value "~/" will be expanded to the current user's home -# directory. For example: - -# Change component loading path -# component_path = /usr/local/lib/openmpi:~/my_openmpi_components - -# See "ompi_info --param all all" for a full listing of Open MPI MCA -# parameters available and their default values. -# - -# hdmon behavior -sensor_sample_rate = 1.0 -sensor_log_samples = 1 - -# Basic behavior to smooth startup -mca_component_show_load_errors = 1 -mpi_param_check = 0 -orte_abort_timeout = 10 -hwloc_base_mem_bind_failure_action = silent - -## Protect the shared file systems - -## Add the interface for out-of-band communication -## and set it up -oob_tcp_peer_retries = 120 -#oob_tcp_connect_timeout=600 - -## Define the MPI interconnects -btl = sm,tcp,self - -## Setup shared memory -btl_sm_free_list_max = 768 diff --git a/contrib/platform/greenplum/slurm/linux b/contrib/platform/greenplum/slurm/linux deleted file mode 100644 index 321fe0cc67..0000000000 --- a/contrib/platform/greenplum/slurm/linux +++ /dev/null @@ -1,30 +0,0 @@ -enable_event_thread_support=yes -enable_opal_multi_threads=yes -enable_orte_progress_threads=yes -enable_ft_thread=no -enable_mem_debug=no -enable_mem_profile=no -enable_debug_symbols=yes -enable_binaries=yes -enable_heterogeneous=no -enable_picky=yes -enable_debug=yes -enable_shared=yes -enable_static=no -enable_memchecker=no -enable_ipv6=no -enable_mpi_fortran=no -enable_mpi_cxx=no -enable_mpi_cxx_seek=no -enable_cxx_exceptions=no -enable_mpi_java=no -enable_io_romio=no -enable_vt=no -enable_mca_no_build=crs,memchecker,snapc,crcp,rml-ftrm,filem-rsh -enable_contrib_no_build=libnbc,vt -with_memory_manager=no -with_tm=no -with_slurm=yes -with_devel_headers=yes -with_portals=no -with_valgrind=no diff --git a/contrib/platform/greenplum/slurm/linux-optimized b/contrib/platform/greenplum/slurm/linux-optimized deleted file mode 100644 index cad65a63b3..0000000000 --- a/contrib/platform/greenplum/slurm/linux-optimized +++ /dev/null @@ -1,30 +0,0 @@ -enable_event_thread_support=yes -enable_opal_multi_threads=yes -enable_orte_progress_threads=yes -enable_ft_thread=no -enable_mem_debug=no -enable_mem_profile=no -enable_debug_symbols=no -enable_binaries=yes -enable_heterogeneous=no -enable_picky=no -enable_debug=no -enable_shared=yes -enable_static=no -enable_memchecker=no -enable_ipv6=no -enable_mpi_fortran=no -enable_mpi_cxx=no -enable_mpi_cxx_seek=no -enable_cxx_exceptions=no -enable_mpi_java=no -enable_io_romio=no -enable_vt=no -enable_mca_no_build=crs,memchecker,snapc,crcp,rml-ftrm,filem-rsh -enable_contrib_no_build=libnbc,vt -with_memory_manager=no -with_tm=no -with_slurm=yes -with_devel_headers=yes -with_portals=no -with_valgrind=no diff --git a/contrib/platform/greenplum/slurm/linux-optimized.conf b/contrib/platform/greenplum/slurm/linux-optimized.conf deleted file mode 100644 index dc6b582879..0000000000 --- a/contrib/platform/greenplum/slurm/linux-optimized.conf +++ /dev/null @@ -1,82 +0,0 @@ -# -# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana -# University Research and Technology -# Corporation. All rights reserved. -# Copyright (c) 2004-2005 The University of Tennessee and The University -# of Tennessee Research Foundation. All rights -# reserved. -# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart, -# University of Stuttgart. All rights reserved. -# Copyright (c) 2004-2005 The Regents of the University of California. -# All rights reserved. -# Copyright (c) 2006 Cisco Systems, Inc. All rights reserved. -# $COPYRIGHT$ -# -# Additional copyrights may follow -# -# $HEADER$ -# - -# This is the default system-wide MCA parameters defaults file. -# Specifically, the MCA parameter "mca_param_files" defaults to a -# value of -# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf" -# (this file is the latter of the two). So if the default value of -# mca_param_files is not changed, this file is used to set system-wide -# MCA parameters. This file can therefore be used to set system-wide -# default MCA parameters for all users. Of course, users can override -# these values if they want, but this file is an excellent location -# for setting system-specific MCA parameters for those users who don't -# know / care enough to investigate the proper values for them. - -# Note that this file is only applicable where it is visible (in a -# filesystem sense). Specifically, MPI processes each read this file -# during their startup to determine what default values for MCA -# parameters should be used. mpirun does not bundle up the values in -# this file from the node where it was run and send them to all nodes; -# the default value decisions are effectively distributed. Hence, -# these values are only applicable on nodes that "see" this file. If -# $sysconf is a directory on a local disk, it is likely that changes -# to this file will need to be propagated to other nodes. If $sysconf -# is a directory that is shared via a networked filesystem, changes to -# this file will be visible to all nodes that share this $sysconf. - -# The format is straightforward: one per line, mca_param_name = -# rvalue. Quoting is ignored (so if you use quotes or escape -# characters, they'll be included as part of the value). For example: - -# Disable run-time MPI parameter checking -# mpi_param_check = 0 - -# Note that the value "~/" will be expanded to the current user's home -# directory. For example: - -# Change component loading path -# component_path = /usr/local/lib/openmpi:~/my_openmpi_components - -# See "ompi_info --param all all" for a full listing of Open MPI MCA -# parameters available and their default values. -# - -# Basic behavior to smooth startup -mca_component_show_load_errors = 1 -mpi_param_check = 0 -orte_abort_timeout = 10 -hwloc_base_mem_bind_failure_action = silent - -# setup slurm -ras_slurm_enable_dyn_alloc = 1 -ras_slurm_dyn_allocate_timeout = 5 - -## Protect the shared file systems - -## Add the interface for out-of-band communication -## and set it up -oob_tcp_peer_retries = 120 -#oob_tcp_connect_timeout=600 - -## Define the MPI interconnects -btl = sm,tcp,self - -## Setup shared memory -btl_sm_free_list_max = 768 diff --git a/contrib/platform/greenplum/slurm/linux.conf b/contrib/platform/greenplum/slurm/linux.conf deleted file mode 100644 index dc6b582879..0000000000 --- a/contrib/platform/greenplum/slurm/linux.conf +++ /dev/null @@ -1,82 +0,0 @@ -# -# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana -# University Research and Technology -# Corporation. All rights reserved. -# Copyright (c) 2004-2005 The University of Tennessee and The University -# of Tennessee Research Foundation. All rights -# reserved. -# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart, -# University of Stuttgart. All rights reserved. -# Copyright (c) 2004-2005 The Regents of the University of California. -# All rights reserved. -# Copyright (c) 2006 Cisco Systems, Inc. All rights reserved. -# $COPYRIGHT$ -# -# Additional copyrights may follow -# -# $HEADER$ -# - -# This is the default system-wide MCA parameters defaults file. -# Specifically, the MCA parameter "mca_param_files" defaults to a -# value of -# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf" -# (this file is the latter of the two). So if the default value of -# mca_param_files is not changed, this file is used to set system-wide -# MCA parameters. This file can therefore be used to set system-wide -# default MCA parameters for all users. Of course, users can override -# these values if they want, but this file is an excellent location -# for setting system-specific MCA parameters for those users who don't -# know / care enough to investigate the proper values for them. - -# Note that this file is only applicable where it is visible (in a -# filesystem sense). Specifically, MPI processes each read this file -# during their startup to determine what default values for MCA -# parameters should be used. mpirun does not bundle up the values in -# this file from the node where it was run and send them to all nodes; -# the default value decisions are effectively distributed. Hence, -# these values are only applicable on nodes that "see" this file. If -# $sysconf is a directory on a local disk, it is likely that changes -# to this file will need to be propagated to other nodes. If $sysconf -# is a directory that is shared via a networked filesystem, changes to -# this file will be visible to all nodes that share this $sysconf. - -# The format is straightforward: one per line, mca_param_name = -# rvalue. Quoting is ignored (so if you use quotes or escape -# characters, they'll be included as part of the value). For example: - -# Disable run-time MPI parameter checking -# mpi_param_check = 0 - -# Note that the value "~/" will be expanded to the current user's home -# directory. For example: - -# Change component loading path -# component_path = /usr/local/lib/openmpi:~/my_openmpi_components - -# See "ompi_info --param all all" for a full listing of Open MPI MCA -# parameters available and their default values. -# - -# Basic behavior to smooth startup -mca_component_show_load_errors = 1 -mpi_param_check = 0 -orte_abort_timeout = 10 -hwloc_base_mem_bind_failure_action = silent - -# setup slurm -ras_slurm_enable_dyn_alloc = 1 -ras_slurm_dyn_allocate_timeout = 5 - -## Protect the shared file systems - -## Add the interface for out-of-band communication -## and set it up -oob_tcp_peer_retries = 120 -#oob_tcp_connect_timeout=600 - -## Define the MPI interconnects -btl = sm,tcp,self - -## Setup shared memory -btl_sm_free_list_max = 768 diff --git a/contrib/platform/greenplum/slurm/mac b/contrib/platform/greenplum/slurm/mac deleted file mode 100644 index d958f8f01d..0000000000 --- a/contrib/platform/greenplum/slurm/mac +++ /dev/null @@ -1,26 +0,0 @@ -enable_event_thread_support=yes -enable_opal_multi_threads=yes -enable_orte_progress_threads=yes -enable_mem_debug=yes -enable_mem_profile=no -enable_debug_symbols=yes -enable_binaries=yes -enable_heterogeneous=no -enable_picky=yes -enable_debug=yes -enable_shared=yes -enable_static=no -enable_io_romio=no -enable_ipv6=no -enable_mpi_fortran=no -enable_mpi_cxx=no -enable_mpi_cxx_seek=no -enable_mpi_java=no -enable_memchecker=no -enable_vt=no -enable_mca_no_build=crs,memchecker,snapc,crcp,rml-ftrm,filem-rsh -enable_contrib_no_build=libnbc,vt -with_memory_manager=no -with_devel_headers=yes -with_xgrid=no -with_slurm=yes diff --git a/contrib/platform/greenplum/slurm/mac-optimized b/contrib/platform/greenplum/slurm/mac-optimized deleted file mode 100644 index ff23dc9458..0000000000 --- a/contrib/platform/greenplum/slurm/mac-optimized +++ /dev/null @@ -1,26 +0,0 @@ -enable_event_thread_support=yes -enable_opal_multi_threads=yes -enable_orte_progress_threads=yes -enable_mem_debug=no -enable_mem_profile=no -enable_debug_symbols=no -enable_binaries=yes -enable_heterogeneous=no -enable_picky=no -enable_debug=no -enable_shared=yes -enable_static=no -enable_io_romio=no -enable_ipv6=no -enable_mpi_fortran=no -enable_mpi_cxx=no -enable_mpi_cxx_seek=no -enable_mpi_java=no -enable_memchecker=no -enable_vt=no -enable_mca_no_build=crs,memchecker,snapc,crcp,rml-ftrm,filem-rsh -enable_contrib_no_build=libnbc,vt -with_memory_manager=no -with_devel_headers=yes -with_xgrid=no -with_slurm=yes diff --git a/contrib/platform/greenplum/slurm/mac-optimized.conf b/contrib/platform/greenplum/slurm/mac-optimized.conf deleted file mode 100644 index dc6b582879..0000000000 --- a/contrib/platform/greenplum/slurm/mac-optimized.conf +++ /dev/null @@ -1,82 +0,0 @@ -# -# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana -# University Research and Technology -# Corporation. All rights reserved. -# Copyright (c) 2004-2005 The University of Tennessee and The University -# of Tennessee Research Foundation. All rights -# reserved. -# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart, -# University of Stuttgart. All rights reserved. -# Copyright (c) 2004-2005 The Regents of the University of California. -# All rights reserved. -# Copyright (c) 2006 Cisco Systems, Inc. All rights reserved. -# $COPYRIGHT$ -# -# Additional copyrights may follow -# -# $HEADER$ -# - -# This is the default system-wide MCA parameters defaults file. -# Specifically, the MCA parameter "mca_param_files" defaults to a -# value of -# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf" -# (this file is the latter of the two). So if the default value of -# mca_param_files is not changed, this file is used to set system-wide -# MCA parameters. This file can therefore be used to set system-wide -# default MCA parameters for all users. Of course, users can override -# these values if they want, but this file is an excellent location -# for setting system-specific MCA parameters for those users who don't -# know / care enough to investigate the proper values for them. - -# Note that this file is only applicable where it is visible (in a -# filesystem sense). Specifically, MPI processes each read this file -# during their startup to determine what default values for MCA -# parameters should be used. mpirun does not bundle up the values in -# this file from the node where it was run and send them to all nodes; -# the default value decisions are effectively distributed. Hence, -# these values are only applicable on nodes that "see" this file. If -# $sysconf is a directory on a local disk, it is likely that changes -# to this file will need to be propagated to other nodes. If $sysconf -# is a directory that is shared via a networked filesystem, changes to -# this file will be visible to all nodes that share this $sysconf. - -# The format is straightforward: one per line, mca_param_name = -# rvalue. Quoting is ignored (so if you use quotes or escape -# characters, they'll be included as part of the value). For example: - -# Disable run-time MPI parameter checking -# mpi_param_check = 0 - -# Note that the value "~/" will be expanded to the current user's home -# directory. For example: - -# Change component loading path -# component_path = /usr/local/lib/openmpi:~/my_openmpi_components - -# See "ompi_info --param all all" for a full listing of Open MPI MCA -# parameters available and their default values. -# - -# Basic behavior to smooth startup -mca_component_show_load_errors = 1 -mpi_param_check = 0 -orte_abort_timeout = 10 -hwloc_base_mem_bind_failure_action = silent - -# setup slurm -ras_slurm_enable_dyn_alloc = 1 -ras_slurm_dyn_allocate_timeout = 5 - -## Protect the shared file systems - -## Add the interface for out-of-band communication -## and set it up -oob_tcp_peer_retries = 120 -#oob_tcp_connect_timeout=600 - -## Define the MPI interconnects -btl = sm,tcp,self - -## Setup shared memory -btl_sm_free_list_max = 768 diff --git a/contrib/platform/greenplum/slurm/mac.conf b/contrib/platform/greenplum/slurm/mac.conf deleted file mode 100644 index dc6b582879..0000000000 --- a/contrib/platform/greenplum/slurm/mac.conf +++ /dev/null @@ -1,82 +0,0 @@ -# -# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana -# University Research and Technology -# Corporation. All rights reserved. -# Copyright (c) 2004-2005 The University of Tennessee and The University -# of Tennessee Research Foundation. All rights -# reserved. -# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart, -# University of Stuttgart. All rights reserved. -# Copyright (c) 2004-2005 The Regents of the University of California. -# All rights reserved. -# Copyright (c) 2006 Cisco Systems, Inc. All rights reserved. -# $COPYRIGHT$ -# -# Additional copyrights may follow -# -# $HEADER$ -# - -# This is the default system-wide MCA parameters defaults file. -# Specifically, the MCA parameter "mca_param_files" defaults to a -# value of -# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf" -# (this file is the latter of the two). So if the default value of -# mca_param_files is not changed, this file is used to set system-wide -# MCA parameters. This file can therefore be used to set system-wide -# default MCA parameters for all users. Of course, users can override -# these values if they want, but this file is an excellent location -# for setting system-specific MCA parameters for those users who don't -# know / care enough to investigate the proper values for them. - -# Note that this file is only applicable where it is visible (in a -# filesystem sense). Specifically, MPI processes each read this file -# during their startup to determine what default values for MCA -# parameters should be used. mpirun does not bundle up the values in -# this file from the node where it was run and send them to all nodes; -# the default value decisions are effectively distributed. Hence, -# these values are only applicable on nodes that "see" this file. If -# $sysconf is a directory on a local disk, it is likely that changes -# to this file will need to be propagated to other nodes. If $sysconf -# is a directory that is shared via a networked filesystem, changes to -# this file will be visible to all nodes that share this $sysconf. - -# The format is straightforward: one per line, mca_param_name = -# rvalue. Quoting is ignored (so if you use quotes or escape -# characters, they'll be included as part of the value). For example: - -# Disable run-time MPI parameter checking -# mpi_param_check = 0 - -# Note that the value "~/" will be expanded to the current user's home -# directory. For example: - -# Change component loading path -# component_path = /usr/local/lib/openmpi:~/my_openmpi_components - -# See "ompi_info --param all all" for a full listing of Open MPI MCA -# parameters available and their default values. -# - -# Basic behavior to smooth startup -mca_component_show_load_errors = 1 -mpi_param_check = 0 -orte_abort_timeout = 10 -hwloc_base_mem_bind_failure_action = silent - -# setup slurm -ras_slurm_enable_dyn_alloc = 1 -ras_slurm_dyn_allocate_timeout = 5 - -## Protect the shared file systems - -## Add the interface for out-of-band communication -## and set it up -oob_tcp_peer_retries = 120 -#oob_tcp_connect_timeout=600 - -## Define the MPI interconnects -btl = sm,tcp,self - -## Setup shared memory -btl_sm_free_list_max = 768 diff --git a/contrib/platform/greenplum/xconnect/linux b/contrib/platform/greenplum/xconnect/linux deleted file mode 100644 index e2dd3bc34b..0000000000 --- a/contrib/platform/greenplum/xconnect/linux +++ /dev/null @@ -1,30 +0,0 @@ -enable_event_thread_support=yes -enable_opal_multi_threads=yes -enable_orte_progress_threads=yes -enable_ft_thread=no -enable_mem_debug=no -enable_mem_profile=no -enable_debug_symbols=yes -enable_binaries=yes -enable_heterogeneous=no -enable_picky=yes -enable_debug=yes -enable_shared=yes -enable_static=no -enable_memchecker=no -enable_ipv6=yes -enable_mpi_fortran=no -enable_mpi_cxx=no -enable_mpi_cxx_seek=no -enable_cxx_exceptions=no -enable_mpi_java=no -enable_io_romio=no -enable_vt=no -enable_mca_no_build=crs,memchecker,snapc,crcp,rml-ftrm,filem-rsh -enable_contrib_no_build=libnbc,vt -with_memory_manager=no -with_tm=no -with_slurm=no -with_devel_headers=yes -with_portals=no -with_valgrind=no diff --git a/contrib/platform/greenplum/xconnect/linux-optimized b/contrib/platform/greenplum/xconnect/linux-optimized deleted file mode 100644 index 36a5ac5eec..0000000000 --- a/contrib/platform/greenplum/xconnect/linux-optimized +++ /dev/null @@ -1,30 +0,0 @@ -enable_event_thread_support=yes -enable_opal_multi_threads=yes -enable_orte_progress_threads=yes -enable_ft_thread=no -enable_mem_debug=no -enable_mem_profile=no -enable_debug_symbols=no -enable_binaries=yes -enable_heterogeneous=no -enable_picky=no -enable_debug=no -enable_shared=yes -enable_static=no -enable_memchecker=no -enable_ipv6=no -enable_mpi_fortran=no -enable_mpi_cxx=no -enable_mpi_cxx_seek=no -enable_cxx_exceptions=no -enable_mpi_java=no -enable_io_romio=no -enable_vt=no -enable_mca_no_build=crs,memchecker,snapc,crcp,rml-ftrm,filem-rsh -enable_contrib_no_build=libnbc,vt -with_memory_manager=no -with_tm=no -with_slurm=no -with_devel_headers=yes -with_portals=no -with_valgrind=no diff --git a/contrib/platform/greenplum/xconnect/linux-optimized.conf b/contrib/platform/greenplum/xconnect/linux-optimized.conf deleted file mode 100644 index 851342ef53..0000000000 --- a/contrib/platform/greenplum/xconnect/linux-optimized.conf +++ /dev/null @@ -1,78 +0,0 @@ -# -# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana -# University Research and Technology -# Corporation. All rights reserved. -# Copyright (c) 2004-2005 The University of Tennessee and The University -# of Tennessee Research Foundation. All rights -# reserved. -# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart, -# University of Stuttgart. All rights reserved. -# Copyright (c) 2004-2005 The Regents of the University of California. -# All rights reserved. -# Copyright (c) 2006 Cisco Systems, Inc. All rights reserved. -# $COPYRIGHT$ -# -# Additional copyrights may follow -# -# $HEADER$ -# - -# This is the default system-wide MCA parameters defaults file. -# Specifically, the MCA parameter "mca_param_files" defaults to a -# value of -# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf" -# (this file is the latter of the two). So if the default value of -# mca_param_files is not changed, this file is used to set system-wide -# MCA parameters. This file can therefore be used to set system-wide -# default MCA parameters for all users. Of course, users can override -# these values if they want, but this file is an excellent location -# for setting system-specific MCA parameters for those users who don't -# know / care enough to investigate the proper values for them. - -# Note that this file is only applicable where it is visible (in a -# filesystem sense). Specifically, MPI processes each read this file -# during their startup to determine what default values for MCA -# parameters should be used. mpirun does not bundle up the values in -# this file from the node where it was run and send them to all nodes; -# the default value decisions are effectively distributed. Hence, -# these values are only applicable on nodes that "see" this file. If -# $sysconf is a directory on a local disk, it is likely that changes -# to this file will need to be propagated to other nodes. If $sysconf -# is a directory that is shared via a networked filesystem, changes to -# this file will be visible to all nodes that share this $sysconf. - -# The format is straightforward: one per line, mca_param_name = -# rvalue. Quoting is ignored (so if you use quotes or escape -# characters, they'll be included as part of the value). For example: - -# Disable run-time MPI parameter checking -# mpi_param_check = 0 - -# Note that the value "~/" will be expanded to the current user's home -# directory. For example: - -# Change component loading path -# component_path = /usr/local/lib/openmpi:~/my_openmpi_components - -# See "ompi_info --param all all" for a full listing of Open MPI MCA -# parameters available and their default values. -# - -# Basic behavior to smooth startup -mca_base_component_show_load_errors = 0 -mpi_param_check = 0 -orte_abort_timeout = 10 -hwloc_base_mem_bind_failure_action = silent - -## Protect the shared file systems - -## Add the interface for out-of-band communication -## and set it up -oob_tcp_peer_retries = 120 -#oob_tcp_connect_timeout=600 - -## Define the MPI interconnects -btl = sm,tcp,self - -## Setup shared memory -btl_sm_free_list_max = 768 diff --git a/contrib/platform/greenplum/xconnect/linux.conf b/contrib/platform/greenplum/xconnect/linux.conf deleted file mode 100644 index 3d25f51286..0000000000 --- a/contrib/platform/greenplum/xconnect/linux.conf +++ /dev/null @@ -1,78 +0,0 @@ -# -# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana -# University Research and Technology -# Corporation. All rights reserved. -# Copyright (c) 2004-2005 The University of Tennessee and The University -# of Tennessee Research Foundation. All rights -# reserved. -# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart, -# University of Stuttgart. All rights reserved. -# Copyright (c) 2004-2005 The Regents of the University of California. -# All rights reserved. -# Copyright (c) 2006 Cisco Systems, Inc. All rights reserved. -# $COPYRIGHT$ -# -# Additional copyrights may follow -# -# $HEADER$ -# - -# This is the default system-wide MCA parameters defaults file. -# Specifically, the MCA parameter "mca_param_files" defaults to a -# value of -# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf" -# (this file is the latter of the two). So if the default value of -# mca_param_files is not changed, this file is used to set system-wide -# MCA parameters. This file can therefore be used to set system-wide -# default MCA parameters for all users. Of course, users can override -# these values if they want, but this file is an excellent location -# for setting system-specific MCA parameters for those users who don't -# know / care enough to investigate the proper values for them. - -# Note that this file is only applicable where it is visible (in a -# filesystem sense). Specifically, MPI processes each read this file -# during their startup to determine what default values for MCA -# parameters should be used. mpirun does not bundle up the values in -# this file from the node where it was run and send them to all nodes; -# the default value decisions are effectively distributed. Hence, -# these values are only applicable on nodes that "see" this file. If -# $sysconf is a directory on a local disk, it is likely that changes -# to this file will need to be propagated to other nodes. If $sysconf -# is a directory that is shared via a networked filesystem, changes to -# this file will be visible to all nodes that share this $sysconf. - -# The format is straightforward: one per line, mca_param_name = -# rvalue. Quoting is ignored (so if you use quotes or escape -# characters, they'll be included as part of the value). For example: - -# Disable run-time MPI parameter checking -# mpi_param_check = 0 - -# Note that the value "~/" will be expanded to the current user's home -# directory. For example: - -# Change component loading path -# component_path = /usr/local/lib/openmpi:~/my_openmpi_components - -# See "ompi_info --param all all" for a full listing of Open MPI MCA -# parameters available and their default values. -# - -# Basic behavior to smooth startup -mca_base_component_show_load_errors = 1 -mpi_param_check = 0 -orte_abort_timeout = 10 -hwloc_base_mem_bind_failure_action = silent - -## Protect the shared file systems - -## Add the interface for out-of-band communication -## and set it up -oob_tcp_peer_retries = 120 -#oob_tcp_connect_timeout=600 - -## Define the MPI interconnects -btl = sm,tcp,self - -## Setup shared memory -btl_sm_free_list_max = 768 diff --git a/contrib/platform/greenplum/xconnect/mac b/contrib/platform/greenplum/xconnect/mac deleted file mode 100644 index 2eb2b5f1ac..0000000000 --- a/contrib/platform/greenplum/xconnect/mac +++ /dev/null @@ -1,26 +0,0 @@ -enable_event_thread_support=yes -enable_opal_multi_threads=yes -enable_orte_progress_threads=yes -enable_mem_debug=yes -enable_mem_profile=no -enable_debug_symbols=yes -enable_binaries=yes -enable_heterogeneous=no -enable_picky=yes -enable_debug=yes -enable_shared=yes -enable_static=no -enable_io_romio=no -enable_ipv6=yes -enable_mpi_fortran=no -enable_mpi_cxx=no -enable_mpi_cxx_seek=no -enable_mpi_java=no -enable_memchecker=no -enable_vt=no -enable_mca_no_build=crs,memchecker,snapc,crcp,rml-ftrm,filem-rsh -enable_contrib_no_build=libnbc,vt -with_memory_manager=no -with_devel_headers=yes -with_xgrid=no -with_slurm=no diff --git a/contrib/platform/greenplum/xconnect/mac-optimized b/contrib/platform/greenplum/xconnect/mac-optimized deleted file mode 100644 index 24b2e4bfb0..0000000000 --- a/contrib/platform/greenplum/xconnect/mac-optimized +++ /dev/null @@ -1,26 +0,0 @@ -enable_event_thread_support=yes -enable_opal_multi_threads=yes -enable_orte_progress_threads=yes -enable_mem_debug=no -enable_mem_profile=no -enable_debug_symbols=no -enable_binaries=yes -enable_heterogeneous=no -enable_picky=no -enable_debug=no -enable_shared=yes -enable_static=no -enable_io_romio=no -enable_ipv6=no -enable_mpi_fortran=no -enable_mpi_cxx=no -enable_mpi_cxx_seek=no -enable_mpi_java=no -enable_memchecker=no -enable_vt=no -enable_mca_no_build=crs,memchecker,snapc,crcp,rml-ftrm,filem-rsh -enable_contrib_no_build=libnbc,vt -with_memory_manager=no -with_devel_headers=yes -with_xgrid=no -with_slurm=no diff --git a/contrib/platform/greenplum/xconnect/mac-optimized.conf b/contrib/platform/greenplum/xconnect/mac-optimized.conf deleted file mode 100644 index 851342ef53..0000000000 --- a/contrib/platform/greenplum/xconnect/mac-optimized.conf +++ /dev/null @@ -1,78 +0,0 @@ -# -# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana -# University Research and Technology -# Corporation. All rights reserved. -# Copyright (c) 2004-2005 The University of Tennessee and The University -# of Tennessee Research Foundation. All rights -# reserved. -# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart, -# University of Stuttgart. All rights reserved. -# Copyright (c) 2004-2005 The Regents of the University of California. -# All rights reserved. -# Copyright (c) 2006 Cisco Systems, Inc. All rights reserved. -# $COPYRIGHT$ -# -# Additional copyrights may follow -# -# $HEADER$ -# - -# This is the default system-wide MCA parameters defaults file. -# Specifically, the MCA parameter "mca_param_files" defaults to a -# value of -# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf" -# (this file is the latter of the two). So if the default value of -# mca_param_files is not changed, this file is used to set system-wide -# MCA parameters. This file can therefore be used to set system-wide -# default MCA parameters for all users. Of course, users can override -# these values if they want, but this file is an excellent location -# for setting system-specific MCA parameters for those users who don't -# know / care enough to investigate the proper values for them. - -# Note that this file is only applicable where it is visible (in a -# filesystem sense). Specifically, MPI processes each read this file -# during their startup to determine what default values for MCA -# parameters should be used. mpirun does not bundle up the values in -# this file from the node where it was run and send them to all nodes; -# the default value decisions are effectively distributed. Hence, -# these values are only applicable on nodes that "see" this file. If -# $sysconf is a directory on a local disk, it is likely that changes -# to this file will need to be propagated to other nodes. If $sysconf -# is a directory that is shared via a networked filesystem, changes to -# this file will be visible to all nodes that share this $sysconf. - -# The format is straightforward: one per line, mca_param_name = -# rvalue. Quoting is ignored (so if you use quotes or escape -# characters, they'll be included as part of the value). For example: - -# Disable run-time MPI parameter checking -# mpi_param_check = 0 - -# Note that the value "~/" will be expanded to the current user's home -# directory. For example: - -# Change component loading path -# component_path = /usr/local/lib/openmpi:~/my_openmpi_components - -# See "ompi_info --param all all" for a full listing of Open MPI MCA -# parameters available and their default values. -# - -# Basic behavior to smooth startup -mca_base_component_show_load_errors = 0 -mpi_param_check = 0 -orte_abort_timeout = 10 -hwloc_base_mem_bind_failure_action = silent - -## Protect the shared file systems - -## Add the interface for out-of-band communication -## and set it up -oob_tcp_peer_retries = 120 -#oob_tcp_connect_timeout=600 - -## Define the MPI interconnects -btl = sm,tcp,self - -## Setup shared memory -btl_sm_free_list_max = 768 diff --git a/contrib/platform/greenplum/xconnect/mac.conf b/contrib/platform/greenplum/xconnect/mac.conf deleted file mode 100644 index 3d25f51286..0000000000 --- a/contrib/platform/greenplum/xconnect/mac.conf +++ /dev/null @@ -1,78 +0,0 @@ -# -# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana -# University Research and Technology -# Corporation. All rights reserved. -# Copyright (c) 2004-2005 The University of Tennessee and The University -# of Tennessee Research Foundation. All rights -# reserved. -# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart, -# University of Stuttgart. All rights reserved. -# Copyright (c) 2004-2005 The Regents of the University of California. -# All rights reserved. -# Copyright (c) 2006 Cisco Systems, Inc. All rights reserved. -# $COPYRIGHT$ -# -# Additional copyrights may follow -# -# $HEADER$ -# - -# This is the default system-wide MCA parameters defaults file. -# Specifically, the MCA parameter "mca_param_files" defaults to a -# value of -# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf" -# (this file is the latter of the two). So if the default value of -# mca_param_files is not changed, this file is used to set system-wide -# MCA parameters. This file can therefore be used to set system-wide -# default MCA parameters for all users. Of course, users can override -# these values if they want, but this file is an excellent location -# for setting system-specific MCA parameters for those users who don't -# know / care enough to investigate the proper values for them. - -# Note that this file is only applicable where it is visible (in a -# filesystem sense). Specifically, MPI processes each read this file -# during their startup to determine what default values for MCA -# parameters should be used. mpirun does not bundle up the values in -# this file from the node where it was run and send them to all nodes; -# the default value decisions are effectively distributed. Hence, -# these values are only applicable on nodes that "see" this file. If -# $sysconf is a directory on a local disk, it is likely that changes -# to this file will need to be propagated to other nodes. If $sysconf -# is a directory that is shared via a networked filesystem, changes to -# this file will be visible to all nodes that share this $sysconf. - -# The format is straightforward: one per line, mca_param_name = -# rvalue. Quoting is ignored (so if you use quotes or escape -# characters, they'll be included as part of the value). For example: - -# Disable run-time MPI parameter checking -# mpi_param_check = 0 - -# Note that the value "~/" will be expanded to the current user's home -# directory. For example: - -# Change component loading path -# component_path = /usr/local/lib/openmpi:~/my_openmpi_components - -# See "ompi_info --param all all" for a full listing of Open MPI MCA -# parameters available and their default values. -# - -# Basic behavior to smooth startup -mca_base_component_show_load_errors = 1 -mpi_param_check = 0 -orte_abort_timeout = 10 -hwloc_base_mem_bind_failure_action = silent - -## Protect the shared file systems - -## Add the interface for out-of-band communication -## and set it up -oob_tcp_peer_retries = 120 -#oob_tcp_connect_timeout=600 - -## Define the MPI interconnects -btl = sm,tcp,self - -## Setup shared memory -btl_sm_free_list_max = 768 diff --git a/contrib/platform/greenplum/bend/linux b/contrib/platform/intel/bend/linux similarity index 100% rename from contrib/platform/greenplum/bend/linux rename to contrib/platform/intel/bend/linux diff --git a/contrib/platform/greenplum/bend/linux-optimized b/contrib/platform/intel/bend/linux-optimized similarity index 100% rename from contrib/platform/greenplum/bend/linux-optimized rename to contrib/platform/intel/bend/linux-optimized diff --git a/contrib/platform/greenplum/bend/linux-optimized.conf b/contrib/platform/intel/bend/linux-optimized.conf similarity index 100% rename from contrib/platform/greenplum/bend/linux-optimized.conf rename to contrib/platform/intel/bend/linux-optimized.conf diff --git a/contrib/platform/greenplum/bend/linux.conf b/contrib/platform/intel/bend/linux.conf similarity index 100% rename from contrib/platform/greenplum/bend/linux.conf rename to contrib/platform/intel/bend/linux.conf diff --git a/contrib/platform/greenplum/bend/mac b/contrib/platform/intel/bend/mac similarity index 97% rename from contrib/platform/greenplum/bend/mac rename to contrib/platform/intel/bend/mac index 312c7a0544..3e63071c60 100644 --- a/contrib/platform/greenplum/bend/mac +++ b/contrib/platform/intel/bend/mac @@ -10,7 +10,7 @@ enable_debug=yes enable_shared=yes enable_static=no enable_io_romio=no -enable_ipv6=yes +enable_ipv6=no enable_mpi_fortran=no enable_mpi_cxx=no enable_mpi_cxx_seek=no diff --git a/contrib/platform/greenplum/bend/mac-optimized b/contrib/platform/intel/bend/mac-optimized similarity index 100% rename from contrib/platform/greenplum/bend/mac-optimized rename to contrib/platform/intel/bend/mac-optimized diff --git a/contrib/platform/greenplum/bend/mac-optimized.conf b/contrib/platform/intel/bend/mac-optimized.conf similarity index 100% rename from contrib/platform/greenplum/bend/mac-optimized.conf rename to contrib/platform/intel/bend/mac-optimized.conf diff --git a/contrib/platform/greenplum/bend/mac.conf b/contrib/platform/intel/bend/mac.conf similarity index 100% rename from contrib/platform/greenplum/bend/mac.conf rename to contrib/platform/intel/bend/mac.conf