diff --git a/contrib/platform/cisco/ebuild/hlfr.conf b/contrib/platform/cisco/ebuild/hlfr.conf
index baab137e72..f426839d90 100644
--- a/contrib/platform/cisco/ebuild/hlfr.conf
+++ b/contrib/platform/cisco/ebuild/hlfr.conf
@@ -49,7 +49,6 @@
 #
 
 # Basic behavior to smooth startup
-mca_component_show_load_errors = 0
 orte_abort_timeout = 10 
 opal_set_max_sys_limits = 1
 
diff --git a/contrib/platform/cisco/ebuild/ludd b/contrib/platform/cisco/ebuild/ludd
new file mode 100644
index 0000000000..daff9264ab
--- /dev/null
+++ b/contrib/platform/cisco/ebuild/ludd
@@ -0,0 +1,35 @@
+enable_dlopen=no
+enable_multicast=yes
+enable_sensors=yes
+enable_opal_multi_threads=yes
+enable_ft_thread=no
+enable_mem_debug=no
+enable_mem_profile=no
+enable_debug_symbols=yes
+enable_binaries=yes
+enable_heterogeneous=no
+enable_picky=yes
+enable_debug=yes
+enable_shared=yes
+enable_static=no
+enable_memchecker=no
+enable_ipv6=no
+enable_mpi_f77=no
+enable_mpi_f90=no
+enable_mpi_cxx=no
+enable_mpi_cxx_seek=no
+enable_cxx_exceptions=no
+enable_per_user_config_files=no
+enable_script_wrapper_compilers=no
+enable_orterun_prefix_by_default=yes
+enable_io_romio=no
+enable_mca_no_build=carto,crs,snapc,crcp,ess-alps,ess-cnos,ess-lsf,ess-portals_utcp,ess-singleton,ess-slave,ess-slurm,ess-slurmd,ess-tm,ess-tool,filem,grpcomm-basic,grpcomm-cnos,grpcomm-hier,notifier-command,notifier-ftb,notifier-smtp,notifier-twitter,plm-alps,plm-ccp,plm-lsf,plm-process,plm-rshd,plm-slurm,plm-submit,plm-tm,plm-xgrid,ras-alps,ras-ccp,ras-gridengine,ras-loadleveler,ras-lsf,ras-slurm,ras-tm,rmaps-rank_file,rmaps-topo,rml-ftrm,routed-direct,routed-linear,routed-radix,routed-slave,timer-catamount,timer-aix,timer-altix,timer-solaris,timer-windows
+enable_contrib_no_build=libnbc,vt
+with_memory_manager=no
+with_tm=no
+with_openib=no
+with_devel_headers=yes
+with_slurm=no
+with_portals=no
+with_valgrind=no
+with_ft=orcm
diff --git a/contrib/platform/cisco/ebuild/ludd.conf b/contrib/platform/cisco/ebuild/ludd.conf
new file mode 100644
index 0000000000..fb7f86ecf1
--- /dev/null
+++ b/contrib/platform/cisco/ebuild/ludd.conf
@@ -0,0 +1,65 @@
+#
+# Copyright (c) 2009      Cisco Systems, Inc.  All rights reserved.
+# $COPYRIGHT$
+# 
+# Additional copyrights may follow
+# 
+# $HEADER$
+#
+
+# This is the default system-wide MCA parameters defaults file.
+# Specifically, the MCA parameter "mca_param_files" defaults to a
+# value of
+# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf"
+# (this file is the latter of the two).  So if the default value of
+# mca_param_files is not changed, this file is used to set system-wide
+# MCA parameters.  This file can therefore be used to set system-wide
+# default MCA parameters for all users.  Of course, users can override
+# these values if they want, but this file is an excellent location
+# for setting system-specific MCA parameters for those users who don't
+# know / care enough to investigate the proper values for them.
+
+# Note that this file is only applicable where it is visible (in a
+# filesystem sense).  Specifically, MPI processes each read this file
+# during their startup to determine what default values for MCA
+# parameters should be used.  mpirun does not bundle up the values in
+# this file from the node where it was run and send them to all nodes;
+# the default value decisions are effectively distributed.  Hence,
+# these values are only applicable on nodes that "see" this file.  If
+# $sysconf is a directory on a local disk, it is likely that changes
+# to this file will need to be propagated to other nodes.  If $sysconf
+# is a directory that is shared via a networked filesystem, changes to
+# this file will be visible to all nodes that share this $sysconf.
+
+# The format is straightforward: one per line, mca_param_name =
+# rvalue.  Quoting is ignored (so if you use quotes or escape
+# characters, they'll be included as part of the value).  For example:
+
+# Disable run-time MPI parameter checking
+#   mpi_param_check = 0
+
+# Note that the value "~/" will be expanded to the current user's home
+# directory.  For example:
+
+# Change component loading path
+#   component_path = /usr/local/lib/openmpi:~/my_openmpi_components
+
+# See "ompi_info --param all all" for a full listing of Open MPI MCA
+# parameters available and their default values.
+#
+
+# Basic behavior to smooth startup
+orte_abort_timeout = 10 
+opal_set_max_sys_limits = 1
+
+# ORTE behavior
+errmgr_base_enable_recovery = 1
+routed = cm
+rmaps = resilient
+orte_create_session_dirs = 0
+
+## Add the interface for out-of-band communication
+## and set it up
+#oob_tcp_listen_mode = listen_thread
+oob_tcp_sndbuf = 32768
+oob_tcp_rcvbuf = 32768
diff --git a/contrib/platform/cisco/ebuild/native b/contrib/platform/cisco/ebuild/native
index 81cfe21958..daff9264ab 100644
--- a/contrib/platform/cisco/ebuild/native
+++ b/contrib/platform/cisco/ebuild/native
@@ -33,4 +33,3 @@ with_slurm=no
 with_portals=no
 with_valgrind=no
 with_ft=orcm
-with_spread=yes
diff --git a/contrib/platform/cisco/ebuild/native.conf b/contrib/platform/cisco/ebuild/native.conf
index ef9d9628d3..fb7f86ecf1 100644
--- a/contrib/platform/cisco/ebuild/native.conf
+++ b/contrib/platform/cisco/ebuild/native.conf
@@ -49,7 +49,6 @@
 #
 
 # Basic behavior to smooth startup
-mca_component_show_load_errors = 0
 orte_abort_timeout = 10 
 opal_set_max_sys_limits = 1
 
diff --git a/contrib/platform/cisco/macosx-dynamic b/contrib/platform/cisco/macosx-dynamic
index a179e7c1b0..7d0309460d 100644
--- a/contrib/platform/cisco/macosx-dynamic
+++ b/contrib/platform/cisco/macosx-dynamic
@@ -1,6 +1,6 @@
-enable_heartbeat=yes
+enable_heartbeat=no
 enable_multicast=yes
-enable_sensors=yes
+enable_sensors=no
 enable_opal_multi_threads=yes
 enable_ft_thread=no
 enable_mem_debug=yes
@@ -24,5 +24,3 @@ enable_mca_no_build=carto,crs,memchecker,filem,plm-slurm,plm-xgrid,snapc
 with_memory_manager=no
 with_devel_headers=yes
 with_xgrid=no
-with_ft=orcm
-with_spread=/opt/local
diff --git a/contrib/platform/cisco/macosx-dynamic.conf b/contrib/platform/cisco/macosx-dynamic.conf
index 96fd4f0b04..9993ed0ab2 100644
--- a/contrib/platform/cisco/macosx-dynamic.conf
+++ b/contrib/platform/cisco/macosx-dynamic.conf
@@ -59,11 +59,9 @@
 #
 
 # Basic behavior to smooth startup
-mca_component_show_load_errors = 0
 orte_abort_timeout = 10 
 
 # ORTE behavior
-errmgr_base_enable_recovery = 1
 routed = cm
 rmaps = resilient
 orte_create_session_dirs = 0
diff --git a/contrib/platform/cisco/macosx-static.conf b/contrib/platform/cisco/macosx-static.conf
index b7e6ec8029..b8ad32256d 100644
--- a/contrib/platform/cisco/macosx-static.conf
+++ b/contrib/platform/cisco/macosx-static.conf
@@ -59,7 +59,6 @@
 #
 
 # Basic behavior to smooth startup
-mca_component_show_load_errors = 0
 orte_abort_timeout = 10 
 
 # ORTE behavior