Remove all remaining vestiges of the Windows integration

This commit was SVN r28137.

README

@@ -115,8 +115,6 @@ General notes
   - ARMv4, ARMv5, ARMv6, ARMv7 (when using non-inline assembly; only
     ARMv7 is fully supported when -DOMPI_DISABLE_INLINE_ASM is used).
   - Other 64 bit platforms (e.g., Linux on PPC64)
-  - Microsoft Windows CCP (Microsoft Windows server 2003 and 2008);
-    see the README.WINDOWS file.
 
 Compiler Notes
 --------------

README.WINDOWS.txt

@@ -1,179 +0,0 @@
-10 July 2009
----------------
-
-This version of Open MPI compiles and runs under Microsoft Windows
-platforms, including Windows XP, Windows HPC Server 2003/2008 and also
-Windows 7 RC. It provides two remote process launch components, one is
-using WMI, and the other is using Windows CCP API for Windows HPC
-Servers. But it has received limited testing compared to other POSIX-like
-environments, so feedbacks are important and helpful for us. 
-
-You can download an Open MPI tarball from the main web site
-(http://www.open-mpi.org) or check out a developer copy via Subversion
-(more information about SVN checkout available on the Open MPI web
-site).
-
-The rest of the document is divided on 3 sections.  The first and
-second sections are for "easy" setup, based on some files that are
-distributed in Open MPI (32 and 64 bits versions).  The third section
-is only for advanced users or developers who want to deeply dig into
-the software.
-
-============================================================================
-
-First approach: Using CMake 
-
-NOTE: CMake support is available in the Open MPI development
-trunk and 1.3.3 release.
-
-
-I. Build Open MPI
-
-  1. Download the latest version of CMake (at least v2.4).
-
-  2. In the CMake GUI, add the source path and build path of Open MPI
-   (out of source build is recommended).
-
-  3. Then configure, and after the first time configuration, all
-     available options will show up in the CMake GUI.  Select the
-     options that you require.
-
-  4. Run configure again to generate all Windows solution files; they
-     will be generated in build path.
-
-  5. Go to the build directory, open the generated Windows solution
-     file, and compile.
-
-  6. Build the 'INSTALL' project to install files into the path that
-     has been set with CMAKE_INSTALL_PREFIX variable in CMake GUI.
-
-  7. (optional) To generate a installer, you should install NSIS, and build the 
-     'PACKAGE' project in the Open MPI sulotion. 
-
-
-II. Build MPI applications with Open MPI
-
-After successfully built and installed Open MPI, there are two ways
-to compile and link your applications against the generated libraries:
-
-  Using Visual Studio IDE
-
-  1. In your application's Visual Studio solution, on the target project
-  that needs to link with MPI, add the installed Open MPI library path 
-  (for example C:\Program Files\OpenMPI_v1.4\lib) into "Project Property Pages" -> 
-  "Configuration Properties" -> Linker -> General -> "Additional Library Directories"
-
-  2. Also put the library names, for example libopen-mpi.lib, into 
-  "Project Property Pages" -> "Configuration Properties" -> Linker -> 
-  Input -> "Additional Dependencies". Please note that, if you built 
-  debug version of Open MPI, the generated library names will have
-  suffix 'd', for example, libopen-mpid.lib.
-
-  Using Open MPI compiler wrappers in VS Command Prompt
-
-  1. Open up a Visual Studio Command Prompt, so that the Visual Studio 
-  environment is set, and the VS compiler command cl.exe is available.
-
-  2. Set up Open MPI path environment variable, for example,
-  "set PATH=c:\Program Files\OpenMPI_v1.4\bin;%PATH%", or set it up in
-  the system settings. Please note, using an Open MPI installer, there
-  will be an option to set the system variables automatically.
-
-  3. Simply use one of the Open MPI compiler wrapper to compile and 
-  link your application with one single command, for example:
-      c:\> mpicc app.c
-
-
-III. Run MPI applications
-
-To launch the application, use the mpirun command, for example:
-      c:\> mpirun -np 2 app.exe
-or
-      c:\> mpirun -np 2 -host host1 host2 app.exe
-
-Please note, in order to launch remote MPI processes using WMI, a few Windows 
-settings has to be configured on all nodes, please refer to the following links:
-http://msdn.microsoft.com/en-us/library/aa393266(VS.85).aspx
-http://community.spiceworks.com/topic/578
-
-
-----------------------------------------------------------------------------
-
-Second approach: Simple and straightforward
-
-Step 1: Untar the contrib/platform/win32/ompi-static.tgz tarball in
-        the root directory of the Open MPI distribution.
-
-Step 2: Go in the ompi/datatype subdirectory in the Open MPI
-        distribution and copy the following:
-
-        datatype_pack.c   to datatype_pack_checksum.c
-        datatype_unpack.c to datatype_unpack_checksum.c
-        
-Step 3: Add the following to ompi/tools/ompi_info/ompi_info.h and
-        change the relevant information inside (i.e., replace
-        everything between @'s).
-
-#define OPAL_CONFIGURE_USER "@USER_NAME@"
-#define OPAL_CONFIGURE_HOST "@HOST_NAME@"
-#define OPAL_CONFIGURE_DATE "@TODAY_DATE@"
-#define OMPI_BUILD_USER OPAL_CONFIGURE_USER
-#define OMPI_BUILD_HOST OPAL_CONFIGURE_HOST
-#define OMPI_BUILD_DATE OPAL_CONFIGURE_DATE
-#define OMPI_BUILD_CFLAGS "/Od /Gm /EHsc /RTC1 /MDd"
-#define OMPI_BUILD_CPPFLAGS "-I${HOME}/ompi-trunk -I${HOME}/opal/include -I${HOME}/ompi-trunk/orte/include -I${HOME}/ompi-trunk/ompi/include"
-#define OMPI_BUILD_CXXFLAGS "/Od /Gm /EHsc /RTC1 /MDd"
-#define OMPI_BUILD_CXXCPPFLAGS "-I${HOME}/ompi-trunk -I../../.. -I$(HOME}/ompi-trunk/opal/include -I${HOME}/ompi-trunk/orte/include -I${HOME}/ompi-trunk/ompi/include"
-#define OMPI_BUILD_FFLAGS ""
-#define OMPI_BUILD_FCFLAGS ""
-#define OMPI_BUILD_LDFLAGS " "
-#define OMPI_BUILD_LIBS " "
-#define OPAL_CC_ABSOLUTE "cl"
-#define OMPI_CXX_ABSOLUTE "cl"
-#define OMPI_F77_ABSOLUTE "none"
-#define OMPI_F90_ABSOLUTE "none"
-#define OMPI_F90_BUILD_SIZE "small"
-
-Step 4: Open the Open MPI project (.sln file) from the root directory
-        of the distribution.
-
-Step 5: Choose which version you want to build (from the project
-        manager).
-
-Step 6: Add the build directory to your PATH.
-
-----------------------------------------------------------------------------
-
-Third approach: Advanced users
-
-The rest of this document is only for advanced users / developers;
-i.e., those who has spare time or an urgent necessity to compile their
-own Windows version of Open MPI.
-
-Compiling Open MPI natively on Windows requires several tools.  Of
-course, one need the Microsoft Visual Studio for their C/C++ compiler
-as well as for the ml (assembler compiler) and the link utilities.
-But the current version require some GNU tools as well.  Here is the
-list of such tools:
-
-1. Download any Unix for Windows environment. Tested environments include
-    - cygwin http://www.cygwin.com/
-    - minGW  http://www.mingw.org/
-    - Windows Services for Unix (SFU)
-             http://technet.microsoft.com/en-us/interopmigration/bb380242.aspx
-
-2. Make the default shell ash.exe (install it if it's not installed by
-   default) as it will highly decrease the configuration and
-   compilation time.
-
-3. Download a very recent Gnu Libtool (e.g., Libtool 2.2.6).
-
-Now you should be set. The most difficult part is done. Just use your
-favorite shell to get a window, go in the Open MPi directory and do
-like in any UNIX environments: configure, make, and make install.
-
-----------------------------------------------------------------------------
-
-If you have any problems, find any bugs please feel free to report
-them to Open MPI user's mailing list (see
-http://www.open-mpi.org/community/lists/ompi.php).

VERSION

@@ -21,12 +21,12 @@ release=0
 # only requirement is that it must be entirely printable ASCII 
 # characters and have no white space.
 
-greek=a1
+greek=
 
 # If want_repo_rev=1, then the repo revision number will be included
 # in the overall Open MPI version number in some form.
 
-want_repo_rev=1
+want_repo_rev=0
 
 # If repo_rev=-1, then the repository version number will be obtained
 # dynamically at run time, either: 
@@ -46,11 +46,11 @@ want_repo_rev=1
 # from an SVN checkout, if repo_rev=-1, then its value is replaced
 # with the output of "svnversion".
 
-repo_rev=-1
+repo_rev=r28134M
 
 # The date when this release was created
 
-date="Unreleased developer copy"
+date="Feb 28, 2013"
 
 # The shared library version of each of Open MPI's public libraries.
 # These versions are maintained in accordance with the "Library

config/opal_config_asm.m4

@@ -761,9 +761,7 @@ AC_DEFUN([OPAL_CONFIG_ASM],[
       [AC_HELP_STRING([--enable-builtin-atomics],
          [Enable use of __sync builtin atomics (default: disabled)])])
 
-    if test "$ompi_cv_c_compiler_vendor" = "microsoft" ; then
+    if test "$enable_builtin_atomics" = "yes" ; then
-        ompi_cv_asm_arch="WINDOWS"
-    elif test "$enable_builtin_atomics" = "yes" ; then
        OPAL_CHECK_SYNC_BUILTINS([ompi_cv_asm_arch="SYNC_BUILTIN"],
          [AC_MSG_ERROR([__sync builtin atomics requested but not found.])])
        AC_DEFINE([OPAL_C_GCC_INLINE_ASSEMBLY], [1],

contrib/build-mca-comps-outside-of-tree/btl_tcp2.h

@@ -119,11 +119,7 @@ struct mca_btl_tcp2_module_t {
 typedef struct mca_btl_tcp2_module_t mca_btl_tcp2_module_t;
 extern mca_btl_tcp2_module_t mca_btl_tcp2_module;
 
-#if defined(__WINDOWS__)
-#define CLOSE_THE_SOCKET(socket)   closesocket(socket)
-#else
 #define CLOSE_THE_SOCKET(socket)   close(socket)
-#endif  /* defined(__WINDOWS__) */
 
 /**
  * Register TCP component parameters with the MCA framework

contrib/build-mca-comps-outside-of-tree/btl_tcp2_component.c

@@ -172,13 +172,6 @@ static void mca_btl_tcp2_component_accept_handler(int, short, void*);
 int mca_btl_tcp2_component_open(void)
 {
     char* message;
-#ifdef __WINDOWS__
-    WSADATA win_sock_data;
-    if( WSAStartup(MAKEWORD(2,2), &win_sock_data) != 0 ) {
-        BTL_ERROR(("failed to initialise windows sockets:%d", WSAGetLastError()));
-        return OMPI_ERROR;
-    }
-#endif
 
     /* initialize state */
     mca_btl_tcp2_component.tcp_listen_sd = -1;
@@ -340,10 +333,6 @@ int mca_btl_tcp2_component_close(void)
     OBJ_DESTRUCT(&mca_btl_tcp2_component.tcp_frag_user);
     OBJ_DESTRUCT(&mca_btl_tcp2_component.tcp_lock);
 
-#ifdef __WINDOWS__
-    WSACleanup();
-#endif
-
     return OMPI_SUCCESS;
 }
 

ompi/CMakeLists.txt

@@ -1,181 +0,0 @@
-# Copyright (c) 2007-2011 High Performance Computing Center Stuttgart, 
-#                         University of Stuttgart.  All rights reserved.
-# Copyright (c) 2008      The University of Tennessee and The University
-#                         of Tennessee Research Foundation.  All rights
-#                         reserved.
-# $COPYRIGHT$
-# 
-# Additional copyrights may follow
-# 
-# $HEADER$
-#
-
-
-
-# The source code is compiled as C++ for dynamic build 
-# and compiled as C for static build
-
-PROJECT (OMPI)
-
-# Recuresive search sub directories excluding mca, mpi and tools. 
-# Add sources in different source groups.
-INCLUDE(list_subdirs)
-CHECK_SUBDIRS("${PROJECT_SOURCE_DIR}" OMPI_SUBDIRS)
-
-SET(OMPI_EXCLUDE_SUBDIRS contrib debuggers mca mpi mpiext tools)
-
-FOREACH(OMPI_SUBDIR ${OMPI_SUBDIRS})
-
-  LIST(FIND OMPI_EXCLUDE_SUBDIRS ${OMPI_SUBDIR} OMPI_EXCLUDE_SUBDIR)
-
-  IF(${OMPI_EXCLUDE_SUBDIR} EQUAL -1)
-
-      FILE(GLOB_RECURSE OMPI_${OMPI_SUBDIR}_FILES 
-        "${OMPI_SUBDIR}/*.h" "${OMPI_SUBDIR}/*.c" "${OMPI_SUBDIR}/*.cc" "${OMPI_SUBDIR}/*.cpp")
-        
-      SET (OMPI_SOURCE_FILES
-        ${OMPI_SOURCE_FILES}
-        ${OMPI_${OMPI_SUBDIR}_FILES}
-      )
-      
-      SOURCE_GROUP("${OMPI_SUBDIR}" FILES ${OMPI_${OMPI_SUBDIR}_FILES})
-      
-  ENDIF(${OMPI_EXCLUDE_SUBDIR} EQUAL  -1)
-  
-ENDFOREACH(OMPI_SUBDIR ${OMPI_SUBDIRS})
-
-
-# Add MPI C files
-FILE(GLOB OMPI_MPI_C_FILES "mpi/c/*.h" "mpi/c/*.c")
-
-# Remove all MPI_File related files if the option is not selected
-IF (NOT OMPI_PROVIDE_MPI_FILE_INTERFACE)
-  MESSAGE( STATUS "Skipping the MPI I/O interface")
-  SET( TMP_SRC "" )
-  FOREACH ( FILENAME ${OMPI_MPI_C_FILES})
-    GET_FILENAME_COMPONENT(relname ${FILENAME} NAME)
-    IF (NOT ${relname} MATCHES "file.*[ch]$")
-      IF (NOT ${relname} STREQUAL "register_datarep.c")
-        LIST(APPEND TMP_SRC ${FILENAME})
-      ENDIF (NOT ${relname} STREQUAL "register_datarep.c")
-    ENDIF(NOT ${relname} MATCHES "file.*[ch]$")
-  ENDFOREACH(FILENAME)
-  SET( OMPI_MPI_C_FILES ${TMP_SRC})
-ENDIF(NOT OMPI_PROVIDE_MPI_FILE_INTERFACE)
-
-SET (OMPI_SOURCE_FILES ${OMPI_SOURCE_FILES} ${OMPI_MPI_C_FILES})
-SOURCE_GROUP(mpi "")
-SOURCE_GROUP(mpi\\c FILES ${OMPI_MPI_C_FILES})
-
-IF(OMPI_ENABLE_MPI_PROFILING)
-  # As weak symbols are not supported by MS compiler,
-  # we have to compile the C source files again for profiler,
-  # i.e. add the pre-processor "OMPI_PROFILING_DEFINES" explicitly.
-  
-  # first get the file names.
-  # FILE(GLOB OMPI_PROFILE_NAMES "mpi/c/*.c" )
-  # then copy them to the build directory with a prefix.
-  FOREACH(FILE_NAME ${OMPI_MPI_C_FILES})
-    GET_FILENAME_COMPONENT(relname ${FILE_NAME} NAME)
-    IF(NOT ${relname} STREQUAL "attr_fn.c")
-      CONFIGURE_FILE(${FILE_NAME}
-                     ${PROJECT_BINARY_DIR}/mpi/c/profile/p${relname} [COPYONLY])
-      SET(OMPI_C_PROFILE_FILES ${OMPI_C_PROFILE_FILES} ${PROJECT_BINARY_DIR}/mpi/c/profile/p${relname})
-    ENDIF(NOT ${relname} STREQUAL "attr_fn.c")
-  ENDFOREACH(FILE_NAME ${OMPI_MPI_C_FILES})
-
-  # FILE(GLOB_RECURSE OMPI_C_PROFILE_FILES "${PROJECT_BINARY_DIR}/mpi/c/profile/*.c" )
-
-  SET_SOURCE_FILES_PROPERTIES(${OMPI_C_PROFILE_FILES} 
-                              PROPERTIES COMPILE_DEFINITIONS OMPI_PROFILING_DEFINES)
-  SET(OMPI_SOURCE_FILES ${OMPI_SOURCE_FILES} ${OMPI_C_PROFILE_FILES})
-  SOURCE_GROUP(mpi\\c\\profile FILES  ${OMPI_C_PROFILE_FILES})
-ELSE(OMPI_ENABLE_MPI_PROFILING)
-  MESSAGE( STATUS "Skipping the MPI profiling interface")
-ENDIF(OMPI_ENABLE_MPI_PROFILING)
-
-
-IF(OMPI_WANT_FORTRAN_BINDINGS)
-  # A handful of files in mpi/fortran/base must be included in libmpi, in order to build the
-  # Fortran 77 glue into libmpi
-  FILE(GLOB OMPI_FORTRAN_BASE_FILES "mpi/fortran/base/*.c")
-  SET_SOURCE_FILES_PROPERTIES(${OMPI_FORTRAN_BASE_FILES} 
-                              PROPERTIES COMPILE_FLAGS "${OMPI_C_DEF_PRE}OMPI_COMPILING_FORTRAN_WRAPPERS=1 ${OMPI_C_DEF_PRE}OMPI_PROFILE_LAYER=0")
-  SET(OMPI_SOURCE_FILES ${OMPI_SOURCE_FILES} ${OMPI_FORTRAN_BASE_FILES})
-  SOURCE_GROUP(mpi\\fortran\\base FILES ${OMPI_FORTRAN_BASE_FILES})
-ENDIF(OMPI_WANT_FORTRAN_BINDINGS)
-
-#configure ompi extension components
-INCLUDE (ompi_ext_config)
-SET (OMPI_SOURCE_FILES ${OMPI_SOURCE_FILES} ${OMPI_EXT_FILES})
-
-INCLUDE (check_mca_subdirs)
-SET (OMPI_SOURCE_FILES ${OMPI_SOURCE_FILES} ${MCA_FILES})
-
-ADD_LIBRARY (libmpi ${OMPI_SOURCE_FILES})
-ADD_DEPENDENCIES(libmpi libopen-rte libopen-pal)
-
-SET_TARGET_PROPERTIES(libmpi PROPERTIES 
-  COMPILE_DEFINITIONS "OMPI_MPIHANDLES_DLL_PREFIX=libompi_dbg_mpihandles;OMPI_MSGQ_DLL_PREFIX=libompi_dbg_msgq;OMPI_BUILDING;OMPI_BUILDING_CXX_BINDINGS_LIBRARY")
-
-# Set compile flags for this target
-IF (BUILD_SHARED_LIBS)
-  SET_TARGET_PROPERTIES(libmpi PROPERTIES 
-    COMPILE_DEFINITIONS "_USRDLL;HAVE_CONFIG_H;OMPI_EXPORTS;OPAL_IMPORTS;ORTE_IMPORTS"
-    COMPILE_FLAGS "${OMPI_CXX_LAN_FLAG}" PREFIX "" IMPORT_PREFIX "")
-
-  IF(WINDOWS_MINGW)
-    TARGET_LINK_LIBRARIES (libmpi ${OpenMPI_BINARY_DIR}/event${CMAKE_DEBUG_POSTFIX}.lib
-      ${OpenMPI_BINARY_DIR}/hwloc${CMAKE_DEBUG_POSTFIX}.lib
-      libopen-rte Ws2_32.lib shlwapi.lib ${EXTRA_LINK_LIBRARIES})
-  ELSEIF(WINDOWS_VS)
-    TARGET_LINK_LIBRARIES (libmpi ${OpenMPI_BINARY_DIR}/${CMAKE_CFG_INTDIR}/event${CMAKE_DEBUG_POSTFIX}.lib
-      ${OpenMPI_BINARY_DIR}/${CMAKE_CFG_INTDIR}/hwloc${CMAKE_DEBUG_POSTFIX}.lib
-      libopen-rte Ws2_32.lib shlwapi.lib ${EXTRA_LINK_LIBRARIES})
-  ENDIF(WINDOWS_MINGW)
-
-ELSE (BUILD_SHARED_LIBS)
-  SET_TARGET_PROPERTIES(libmpi PROPERTIES COMPILE_DEFINITIONS "${OMPI_C_DEF_PRE}_LIB")
-ENDIF(BUILD_SHARED_LIBS)
-
-# generate ompi_config.h
-CONFIGURE_FILE(${OpenMPI_SOURCE_DIR}/ompi/include/ompi_config.h.in  ${OpenMPI_BINARY_DIR}/ompi/include/ompi_config.h)
-
-# generate version.h
-CONFIGURE_FILE(${OpenMPI_SOURCE_DIR}/ompi/include/ompi/version.h.in  ${OpenMPI_BINARY_DIR}/ompi/include/ompi/version.h)
-
-
-ADD_SUBDIRECTORY(mpi)
-ADD_SUBDIRECTORY(tools)
-
-
-# Install libraries headers, and shared files
-INSTALL(TARGETS libmpi
-        RUNTIME DESTINATION bin
-        LIBRARY DESTINATION lib
-        ARCHIVE DESTINATION lib)
-INSTALL(FILES ${PROJECT_BINARY_DIR}/include/user/mpi.h ${PROJECT_SOURCE_DIR}/include/mpi_portable_platform.h
-  DESTINATION include)
-
-INSTALL(FILES errhandler/help-mpi-errors.txt
-  DESTINATION share/openmpi)
-
-IF (OMPI_DEBUG_BUILD AND WINDOWS_VS)
-  INSTALL(FILES ${OpenMPI_BINARY_DIR}/Debug/libmpi${CMAKE_DEBUG_POSTFIX}.pdb
-    DESTINATION bin)
-ENDIF (OMPI_DEBUG_BUILD AND WINDOWS_VS)
-
-IF(OMPI_WANT_FORTRAN_BINDINGS)
-  INSTALL(FILES ${PROJECT_BINARY_DIR}/include/mpif.h
-    ${PROJECT_BINARY_DIR}/include/mpif-config.h 
-    ${PROJECT_BINARY_DIR}/include/mpif-common.h
-    ${PROJECT_SOURCE_DIR}/include/mpif-all-common.h
-    ${PROJECT_SOURCE_DIR}/include/mpif-mpi-io.h
-    DESTINATION include)
-ENDIF(OMPI_WANT_FORTRAN_BINDINGS)
-
-INSTALL(FILES ${PROJECT_SOURCE_DIR}/runtime/help-mpi-runtime.txt ${PROJECT_SOURCE_DIR}/mpi/help-mpi-api.txt
-  DESTINATION share/openmpi)
-INSTALL(DIRECTORY mpi/cxx/ DESTINATION include/openmpi/ompi/mpi/cxx
-  FILES_MATCHING PATTERN "*.h" PATTERN ".svn" EXCLUDE)
-

ompi/Makefile.am

@@ -19,8 +19,6 @@
 # $HEADER$
 #
 
-EXTRA_DIST = CMakeLists.txt
-
 # We always have C bindings, but do we have profiling?
 
 if BUILD_MPI_BINDINGS_LAYER

ompi/include/ompi_config.h.in

@@ -79,35 +79,6 @@ typedef struct {
 #endif
 
 
-#if defined(__WINDOWS__)
-
-#  if defined(_USRDLL)    /* building shared libraries (.DLL) */
-#    if defined(OMPI_EXPORTS)
-#      define OMPI_DECLSPEC        __declspec(dllexport)
-#      define OMPI_MODULE_DECLSPEC
-#    else
-#      if defined(OMPI_IMPORTS)
-#        define OMPI_DECLSPEC      __declspec(dllimport)
-#      else
-#        define OMPI_DECLSPEC
-#      endif  /*defined(OMPI_IMPORTS)*/
-#      if defined(OMPI_MODULE_EXPORTS)
-#        define OMPI_MODULE_DECLSPEC __declspec(dllexport)
-#      else
-#        define OMPI_MODULE_DECLSPEC __declspec(dllimport)
-#      endif  /* defined(OMPI_MODULE_EXPORTS) */
-#    endif  /* defined(OMPI_EXPORTS) */
-#  else          /* building static library */
-#    if defined(OMPI_IMPORTS)
-#      define OMPI_DECLSPEC        __declspec(dllimport)
-#    else
-#      define OMPI_DECLSPEC
-#    endif  /* defined(OMPI_IMPORTS) */
-#    define OMPI_MODULE_DECLSPEC
-#  endif  /* defined(_USRDLL) */
-
-#else
-
 #  if OPAL_C_HAVE_VISIBILITY
 #    ifndef OMPI_DECLSPEC
 #      define OMPI_DECLSPEC            __opal_attribute_visibility__("default")
@@ -123,7 +94,6 @@ typedef struct {
 #      define OMPI_MODULE_DECLSPEC
 #    endif
 #  endif
-#endif  /* defined(__WINDOWS__) */
 
 /* Convenience */
 #if OMPI_BUILD_FORTRAN_MPIFH_BINDINGS || OMPI_BUILD_FORTRAN_USEMPI_BINDINGS || OMPI_BUILD_FORTRAN_USEMPIF08_BINDINGS

ompi/mca/bcol/basesmuma/bcol_basesmuma_smcm.h

@@ -52,10 +52,6 @@ typedef struct bcol_basesmuma_smcm_mmap_t {
     size_t map_size;
     /* Filename */
     char map_path[OPAL_PATH_MAX];
-#if defined(__WINDOWS__)
-    /* Handle to the object */
-    HANDLE hMappedObject;
-#endif  /* defined(__WINDOWS__) */
 } bcol_basesmuma_smcm_mmap_t;
 
 OBJ_CLASS_DECLARATION(bcol_basesmuma_smcm_mmap_t);

ompi/mca/bcol/ptpcoll/bcol_ptpcoll.h

@@ -27,8 +27,6 @@ BEGIN_C_DECLS
 #ifdef HAVE_SCHED_YIELD
 #  include <sched.h>
 #  define SPIN sched_yield()
-#elif defined(__WINDOWS__)
-#  define SPIN SwitchToThread()
 #else  /* no switch available */
 #  define SPIN
 #endif

ompi/mca/btl/openib/btl_openib.c

@@ -12,7 +12,7 @@
  *                         All rights reserved.
  * Copyright (c) 2007-2013 Cisco Systems, Inc.  All rights reserved.
  * Copyright (c) 2006-2009 Mellanox Technologies. All rights reserved.
- * Copyright (c) 2006-2012 Los Alamos National Security, LLC.  All rights
+ * Copyright (c) 2006-2013 Los Alamos National Security, LLC.  All rights
  *                         reserved.
  * Copyright (c) 2006-2007 Voltaire All rights reserved.
  * Copyright (c) 2008-2012 Oracle and/or its affiliates.  All rights reserved.
@@ -134,9 +134,7 @@ void mca_btl_openib_show_init_error(const char *file, int line,
 {
     if (ENOMEM == errno) {
         int ret;
-#ifndef __WINDOWS__
         struct rlimit limit;
-#endif
         char *str_limit = NULL;
 
 #if HAVE_DECL_RLIMIT_MEMLOCK
@@ -144,7 +142,6 @@ void mca_btl_openib_show_init_error(const char *file, int line,
 #else
         ret = -1;
 #endif
-#ifndef __WINDOWS__
         if (0 != ret) {
             asprintf(&str_limit, "Unknown");
         } else if (limit.rlim_cur == RLIM_INFINITY) {
@@ -152,7 +149,6 @@ void mca_btl_openib_show_init_error(const char *file, int line,
         } else {
             asprintf(&str_limit, "%ld", (long)limit.rlim_cur);
         }
-#endif
 
         opal_show_help("help-mpi-btl-openib.txt", "init-fail-no-mem",
                        true, ompi_process_info.nodename,

ompi/mca/btl/openib/btl_openib_component.c

@@ -12,7 +12,7 @@
  *                         All rights reserved.
  * Copyright (c) 2006-2013 Cisco Systems, Inc.  All rights reserved.
  * Copyright (c) 2006-2009 Mellanox Technologies. All rights reserved.
- * Copyright (c) 2006-2012 Los Alamos National Security, LLC.  All rights
+ * Copyright (c) 2006-2013 Los Alamos National Security, LLC.  All rights
  *                         reserved.
  * Copyright (c) 2006-2007 Voltaire All rights reserved.
  * Copyright (c) 2009-2012 Oracle and/or its affiliates.  All rights reserved.
@@ -252,9 +252,7 @@ static int btl_openib_component_close(void)
 #endif
 
     ompi_btl_openib_connect_base_finalize();
-#ifndef __WINDOWS__
     ompi_btl_openib_fd_finalize();
-#endif
     ompi_btl_openib_ini_finalize();
     if (NULL != mca_btl_openib_component.receive_queues) {
         free(mca_btl_openib_component.receive_queues);
@@ -2478,24 +2476,20 @@ btl_openib_component_init(int *num_btl_modules,
         goto no_btls;
     }
 
-#ifndef __WINDOWS__
     seedv[0] = OMPI_PROC_MY_NAME->vpid;
     seedv[1] = opal_timer_base_get_cycles();
     seedv[2] = opal_timer_base_get_cycles();
     seed48(seedv);
-#endif
 
     /* Read in INI files with device-specific parameters */
     if (OMPI_SUCCESS != (ret = ompi_btl_openib_ini_init())) {
         goto no_btls;
     }
 
-#ifndef __WINDOWS__
     /* Initialize FD listening */
     if (OMPI_SUCCESS != ompi_btl_openib_fd_init()) {
         goto no_btls;
     }
-#endif
 
     /* Init CPC components */
     if (OMPI_SUCCESS != (ret = ompi_btl_openib_connect_base_init())) {
@@ -2916,10 +2910,8 @@ btl_openib_component_init(int *num_btl_modules,
     /* If we fail early enough in the setup, we just modex around that
        there are no openib BTL's in this process and return NULL. */
 
-#ifndef __WINDOWS__
     /* Be sure to shut down the fd listener */
     ompi_btl_openib_fd_finalize();
-#endif
 
     mca_btl_openib_component.ib_num_btls = 0;
     btl_openib_modex_send();

ompi/mca/btl/openib/btl_openib_ini.c

@@ -11,7 +11,7 @@
  *                         All rights reserved.
  * Copyright (c) 2006-2013 Cisco Systems, Inc.  All rights reserved.
  * Copyright (c) 2008      Mellanox Technologies. All rights reserved.
- * Copyright (c) 2012      Los Alamos National Security, LLC.  All rights
+ * Copyright (c) 2012-2013 Los Alamos National Security, LLC.  All rights
  *                         reserved. 
  * $COPYRIGHT$
  *
@@ -107,14 +107,7 @@ int ompi_btl_openib_ini_init(void)
 {
     int ret = OMPI_ERR_NOT_FOUND;
     char *colon;
-
-#ifndef __WINDOWS__
     char separator = ':';
-#else
-    /* ':' is part of the path on Windows,
-       so use ';' instead. */
-    char separator = ';';
-#endif
 
     OBJ_CONSTRUCT(&devices, opal_list_t);
 

ompi/mca/btl/openib/connect/btl_openib_connect_rdmacm.c

@@ -4,7 +4,7 @@
  * Copyright (c) 2008      Mellanox Technologies. All rights reserved.
  * Copyright (c) 2009      Sandia National Laboratories. All rights reserved.
  * Copyright (c) 2010      Oracle and/or its affiliates.  All rights reserved.
- * Copyright (c) 2012      Los Alamos National Security, LLC.  All rights
+ * Copyright (c) 2012-2013 Los Alamos National Security, LLC.  All rights
  *                         reserved. 
  *
  * $COPYRIGHT$
@@ -1051,10 +1051,8 @@ static int rdmacm_endpoint_finalize(struct mca_btl_base_endpoint_t *endpoint)
                 OPAL_OUTPUT((-1, "MAIN Main thread calling disconnect on ID %p",
                              (void*) ((id_context_t*) item2)->id));
                 ++num_to_wait_for;
-#ifndef __WINDOWS__
                 ompi_btl_openib_fd_run_in_service(call_disconnect_callback,
                                                   item2);
-#endif
             }
 	    /* remove_item returns the item before the item removed,
 	       meaning that the for list is still safe */
@@ -1070,10 +1068,8 @@ static int rdmacm_endpoint_finalize(struct mca_btl_base_endpoint_t *endpoint)
 
     /* Now wait for all the disconnect callbacks to occur */
     while (num_to_wait_for != disconnect_callbacks) {
-#ifndef __WINDOWS__
         ompi_btl_openib_fd_main_thread_drain();
         sched_yield();
-#endif
     }
 
     OPAL_OUTPUT((-1, "MAIN Endpoint finished finalizing"));
@@ -1968,10 +1964,8 @@ static int rdmacm_component_finalize(void)
     }
 
     if (NULL != event_channel) {
-#ifndef __WINDOWS__
         rc = ompi_btl_openib_fd_unmonitor(event_channel->fd,
                                           rdmacm_unmonitor, (void*) &barrier);
-#endif
         if (OMPI_SUCCESS != rc) {
             BTL_ERROR(("Error disabling fd monitor"));
         }
@@ -1979,9 +1973,7 @@ static int rdmacm_component_finalize(void)
         /* Wait for the service thread to stop monitoring the fd */
         OPAL_OUTPUT((-1, "MAIN rdmacm_component_finalize: waiting for thread to finish"));
         while (0 == barrier) {
-#ifndef __WINDOWS__
             sched_yield();
-#endif
         }
         OPAL_OUTPUT((-1, "MAIN rdmacm_component_finalize: thread finished"));
     }
@@ -2041,11 +2033,9 @@ static int rdmacm_component_init(void)
         return OMPI_ERR_UNREACH;
     }
 
-#ifndef __WINDOWS__
     /* Start monitoring the fd associated with the cm_device */
     ompi_btl_openib_fd_monitor(event_channel->fd, OPAL_EV_READ,
                                rdmacm_event_dispatch, NULL);
-#endif
 
     rdmacm_component_initialized = true;
     return OMPI_SUCCESS;

ompi/mca/btl/openib/connect/btl_openib_connect_udcm.c

@@ -3,7 +3,7 @@
  * Copyright (c) 2007-2012 Cisco Systems, Inc.  All rights reserved.
  * Copyright (c) 2008-2009 Mellanox Technologies. All rights reserved.
  * Copyright (c) 2009      IBM Corporation.  All rights reserved.
- * Copyright (c) 2011      Los Alamos National Security, LLC.  All
+ * Copyright (c) 2011-2013 Los Alamos National Security, LLC.  All
  *                         rights reserved.
  *
  * $COPYRIGHT$
@@ -706,9 +706,7 @@ static int udcm_module_finalize(mca_btl_openib_module_t *btl,
     ompi_btl_openib_fd_unmonitor(m->cm_channel->fd, udcm_unmonitor, (void *)&barrier);
 
     while (0 == barrier) {
-#ifndef __WINDOWS__
 	sched_yield();
-#endif
     }
 
     /* destroy the listen queue pair. this will cause ibv_get_cq_event to

ompi/mca/btl/sctp/btl_sctp.h

@@ -115,11 +115,7 @@ struct mca_btl_sctp_module_t {
 typedef struct mca_btl_sctp_module_t mca_btl_sctp_module_t;
 extern mca_btl_sctp_module_t mca_btl_sctp_module;
 
-#if defined(__WINDOWS__)
-#define CLOSE_THE_SOCKET(socket)   closesocket(socket)
-#else
 #define CLOSE_THE_SOCKET(socket)   close(socket)
-#endif  /* defined(__WINDOWS__) */
 
 /**
  * SCTP component initialization.

ompi/mca/btl/sctp/btl_sctp_component.c

@@ -17,10 +17,6 @@
  * 
  * $HEADER$
  *
- * In windows, many of the socket functions return an EWOULDBLOCK
- * instead of \ things like EAGAIN, EINPROGRESS, etc. It has been
- * verified that this will \ not conflict with other error codes that
- * are returned by these functions \ under UNIX/Linux environments 
  */
 
 #include "ompi_config.h"
@@ -232,14 +228,6 @@ static int mca_btl_sctp_component_register(void)
 
 static int mca_btl_sctp_component_open(void)
 {
-#ifdef __WINDOWS__
-    WSADATA win_sock_data;
-    if (WSAStartup(MAKEWORD(2,2), &win_sock_data) != 0) {
-        BTL_ERROR(("failed to initialise windows sockets:%d", WSAGetLastError()));
-        return OMPI_ERROR;
-    }
-#endif
-
     /* initialize state */
     mca_btl_sctp_component.sctp_listen_sd = -1;
     /* TODO different sd for ipv6 */
@@ -347,10 +335,6 @@ int mca_btl_sctp_component_close(void)
     OBJ_DESTRUCT(&mca_btl_sctp_component.sctp_frag_user);
     OBJ_DESTRUCT(&mca_btl_sctp_component.sctp_lock);
 
-#ifdef __WINDOWS__
-    WSACleanup();
-#endif
-
     return OMPI_SUCCESS;
 }
 

ompi/mca/btl/tcp/btl_tcp.h

@@ -122,11 +122,7 @@ struct mca_btl_tcp_module_t {
 typedef struct mca_btl_tcp_module_t mca_btl_tcp_module_t;
 extern mca_btl_tcp_module_t mca_btl_tcp_module;
 
-#if defined(__WINDOWS__)
-#define CLOSE_THE_SOCKET(socket)   closesocket(socket)
-#else
 #define CLOSE_THE_SOCKET(socket)   close(socket)
-#endif  /* defined(__WINDOWS__) */
 
 /**
  * TCP component initialization.

ompi/mca/btl/tcp/btl_tcp_component.c

@@ -12,7 +12,7 @@
  * Copyright (c) 2007-2012 Cisco Systems, Inc.  All rights reserved.
  * Copyright (c) 2008      Sun Microsystems, Inc.  All rights reserved.
  * Copyright (c) 2009      Oak Ridge National Laboratory
- * Copyright (c) 2012      Los Alamos National Security, LLC.  All rights
+ * Copyright (c) 2012-2013 Los Alamos National Security, LLC.  All rights
  *                         reserved. 
  * $COPYRIGHT$
  * 
@@ -189,11 +189,7 @@ static int mca_btl_tcp_component_register(void)
         mca_btl_tcp_param_register_string("if_include", "Comma-delimited list of devices and/or CIDR notation of networks to use for MPI communication (e.g., \"eth0,192.168.0.0/16\").  Mutually exclusive with btl_tcp_if_exclude.", "");
     mca_btl_tcp_component.tcp_if_exclude =
         mca_btl_tcp_param_register_string("if_exclude", "Comma-delimited list of devices and/or CIDR notation of networks to NOT use for MPI communication -- all devices not matching these specifications will be used (e.g., \"eth0,192.168.0.0/16\").  If set to a non-default value, it is mutually exclusive with btl_tcp_if_include.", 
-#ifndef __WINDOWS__
         "127.0.0.1/8,sppp"
-#else
-        ""
-#endif
         );
 
     mca_btl_tcp_component.tcp_free_list_num =
@@ -329,14 +325,6 @@ static int mca_btl_tcp_component_register(void)
 
 static int mca_btl_tcp_component_open(void)
 {
-#ifdef __WINDOWS__
-    WSADATA win_sock_data;
-    if( WSAStartup(MAKEWORD(2,2), &win_sock_data) != 0 ) {
-        BTL_ERROR(("failed to initialise windows sockets:%d", WSAGetLastError()));
-        return OMPI_ERROR;
-    }
-#endif
-
     /* initialize state */
     mca_btl_tcp_component.tcp_listen_sd = -1;
 #if OPAL_WANT_IPV6
@@ -430,10 +418,6 @@ static int mca_btl_tcp_component_close(void)
     OBJ_DESTRUCT(&mca_btl_tcp_component.tcp_frag_user);
     OBJ_DESTRUCT(&mca_btl_tcp_component.tcp_lock);
 
-#ifdef __WINDOWS__
-    WSACleanup();
-#endif
-
     return OMPI_SUCCESS;
 }
 

ompi/mca/coll/sm/coll_sm_reduce.c

@@ -52,12 +52,10 @@ static int reduce_no_order(void *sbuf, void* rbuf, int count,
 /*
  * Useful utility routine
  */
-#if !defined(__WINDOWS__)
 static inline int min(int a, int b)
 {
     return (a < b) ? a : b;
 }
-#endif  /* !defined(__WINDOWS__) */
 
 /**
  * Shared memory reduction.

ompi/mca/fbtl/base/fbtl_base_open.c

@@ -34,11 +34,7 @@
  * statements and the definition of an array of pointers to each
  * component's public mca_base_component_t struct.
  */
-#ifdef __WINDOWS__
-    const mca_base_component_t *mca_fbtl_base_static_components[] = {NULL};
-#else 
 #include "ompi/mca/fbtl/base/static-components.h"
-#endif
 
 /*
  * Global variables; most of which are loaded by back-ends of MCA

ompi/mca/fcoll/base/fcoll_base_open.c

@@ -34,11 +34,7 @@
  * statements and the definition of an array of pointers to each
  * component's public mca_base_component_t struct.
  */
-#ifdef __WINDOWS__
-    const mca_base_component_t *mca_fcoll_base_static_components[] = {NULL};
-#else 
 #include "ompi/mca/fcoll/base/static-components.h"
-#endif
 
 /*
  * Global variables; most of which are loaded by back-ends of MCA

ompi/mca/fs/base/fs_base_get_parent_dir.c

@@ -48,15 +48,9 @@ void mca_fs_base_get_parent_dir ( char *filename, char **dirnamep)
     int err;
     char *dir = NULL, *slash;
     struct stat statbuf;
-    
-
 
     err = lstat(filename, &statbuf);
 
-/* no symlink on Windows */
-#ifdef __WINDOWS__
-    dir = strdup(filename);
-#else
     if (err || (!S_ISLNK(statbuf.st_mode))) {
 	/* no such file, or file is not a link; these are the "normal"
 	 * cases where we can just return the parent directory.
@@ -88,7 +82,6 @@ void mca_fs_base_get_parent_dir ( char *filename, char **dirnamep)
 	    free(linkbuf);
 	}
     }
-#endif
 
     slash = strrchr(dir, '/');
     if (!slash) strncpy(dir, ".", 2);

ompi/mca/fs/base/fs_base_open.c

@@ -35,11 +35,7 @@
  * statements and the definition of an array of pointers to each
  * component's public mca_base_component_t struct.
  */
-#ifdef __WINDOWS__
-    const mca_base_component_t *mca_fs_base_static_components[] = {NULL};
-#else 
 #include "ompi/mca/fs/base/static-components.h"
-#endif
 
 /*
  * Global variables; most of which are loaded by back-ends of MCA

ompi/mca/rte/orte/rte_orte_module.c

@@ -108,9 +108,7 @@ void ompi_rte_wait_for_debugger(void)
     if (orte_standalone_operation) {
         /* spin until debugger attaches and releases us */
         while (MPIR_debug_gate == 0) {
-#if defined(__WINDOWS__)
+#if defined(HAVE_USLEEP)
-            Sleep(100);     /* milliseconds */
-#elif defined(HAVE_USLEEP)
             usleep(100000); /* microseconds */
 #else
             sleep(1);       /* seconds */

ompi/mca/sbgp/basesmsocket/sbgp_basesmsocket.h

@@ -25,8 +25,6 @@ BEGIN_C_DECLS
 #ifdef HAVE_SCHED_YIELD
 #  include <sched.h>
 #  define SPIN sched_yield()
-#elif defined(__WINDOWS__)
-#  define SPIN SwitchToThread()
 #else  /* no switch available */
 #  define SPIN
 #endif

ompi/mca/sbgp/basesmuma/sbgp_basesmuma.h

@@ -26,8 +26,6 @@ BEGIN_C_DECLS
 #ifdef HAVE_SCHED_YIELD
 #  include <sched.h>
 #  define SPIN sched_yield()
-#elif defined(__WINDOWS__)
-#  define SPIN SwitchToThread()
 #else  /* no switch available */
 #  define SPIN
 #endif

ompi/mca/sbgp/ibnet/sbgp_ibnet.h

@@ -28,8 +28,6 @@ BEGIN_C_DECLS
 #ifdef HAVE_SCHED_YIELD
 #  include <sched.h>
 #  define SPIN sched_yield()
-#elif defined(__WINDOWS__)
-#  define SPIN SwitchToThread()
 #else  /* no switch available */
 #  define SPIN
 #endif

ompi/mca/sbgp/p2p/sbgp_p2p.h

@@ -26,8 +26,6 @@ BEGIN_C_DECLS
 #ifdef HAVE_SCHED_YIELD
 #  include <sched.h>
 #  define SPIN sched_yield()
-#elif defined(__WINDOWS__)
-#  define SPIN SwitchToThread()
 #else  /* no switch available */
 #  define SPIN
 #endif

ompi/mca/sharedfp/base/sharedfp_base_open.c

@@ -35,11 +35,7 @@
  * statements and the definition of an array of pointers to each
  * component's public mca_base_component_t struct.
  */
-#ifdef __WINDOWS__
-    const mca_base_component_t *mca_sharedfp_base_static_components[] = {NULL};
-#else 
 #include "ompi/mca/sharedfp/base/static-components.h"
-#endif
 
 /*
  * Global variables; most of which are loaded by back-ends of MCA

ompi/mca/vprotocol/pessimist/vprotocol_pessimist_sender_based.c

@@ -26,17 +26,6 @@
 
 static int sb_mmap_file_open(const char *path)
 {
-#if defined(__WINDOWS__)
-    sb.sb_fd = CreateFile(path, GENERIC_READ | GENERIC_WRITE, 0, NULL, 
-                          CREATE_ALWAYS, FILE_ATTRIBUTE_NORMAL, NULL);
-    if(INVALID_HANDLE_VALUE == sb.sb_fd) 
-    { 
-        V_OUTPUT_ERR("pml_v: vprotocol_pessimist: sender_based_init: open (%s): %s", 
-                     path, GetLastError());
-        return OPAL_ERR_FILE_OPEN_FAILURE;
-    }
-    return OPAL_SUCCESS;
-#else    
     sb.sb_fd = open(path, O_CREAT | O_TRUNC | O_RDWR, 0600);
     if(-1 == sb.sb_fd)
     {
@@ -45,44 +34,18 @@ static int sb_mmap_file_open(const char *path)
         return OPAL_ERR_FILE_OPEN_FAILURE;
     }
     return OPAL_SUCCESS;
-#endif
 }
 
 static void sb_mmap_file_close(void)
 {
-#if defined(__WINDOWS__)    
-    CloseHandle(sb.sb_fd);
-#else
     int ret = close(sb.sb_fd);
     if(-1 == ret)
         V_OUTPUT_ERR("pml_v: protocol_pessimist: sender_based_finalize: close (%d): %s", 
                      sb.sb_fd, strerror(errno));
-#endif
 }
     
 static void sb_mmap_alloc(void)
 {
-#if defined(__WINDOWS__)
-    sb.sb_map = CreateFileMapping(sb.sb_fd, NULL, PAGE_READWRITE, 0, 
-                                  (DWORD)sb.sb_offset + sb.sb_length,  NULL); 
-    if(NULL == sb.sb_map) 
-    {
-        V_OUTPUT_ERR("pml_v: vprotocol_pessimist: sender_based_alloc: CreateFileMapping : %s", 
-                     GetLastError());
-        ompi_mpi_abort(MPI_COMM_NULL, MPI_ERR_NO_SPACE, false);
-    }
-    
-    sb.sb_addr = (uintptr_t) MapViewOfFile(sb.sb_map, FILE_MAP_ALL_ACCESS, 0, 
-                                           sb.sb_offset, sb.sb_length); 
-    if(NULL == (void*)sb.sb_addr) 
-    {
-        V_OUTPUT_ERR("pml_v: vprotocol_pessimist: sender_based_alloc: mmap: %s", 
-                     GetLastError());
-        CloseHandle(sb.sb_map);
-        CloseHandle(sb.sb_fd);
-        ompi_mpi_abort(MPI_COMM_NULL, MPI_ERR_NO_SPACE, false);    
-    }
-#else    
 #ifndef MAP_NOCACHE
 #   define MAP_NOCACHE 0
 #endif
@@ -104,20 +67,14 @@ static void sb_mmap_alloc(void)
         close(sb.sb_fd);
         ompi_mpi_abort(MPI_COMM_NULL, MPI_ERR_NO_SPACE, false);
     }
-#endif
 }
 
 static void sb_mmap_free(void)
 {
-#if    defined(__WINDOWS__)
-    UnmapViewOfFile( (LPCVOID)sb.sb_addr);
-    CloseHandle(sb.sb_map);
-#else
     int ret = munmap((void *) sb.sb_addr, sb.sb_length);
     if(-1 == ret)
         V_OUTPUT_ERR("pml_v: protocol_pessimsit: sender_based_finalize: munmap (%p): %s", 
                      (void *) sb.sb_addr, strerror(errno));
-#endif
 }
 
 int vprotocol_pessimist_sender_based_init(const char *mmapfile, size_t size) 

ompi/mca/vprotocol/pessimist/vprotocol_pessimist_sender_based_types.h

@@ -29,14 +29,7 @@ typedef struct vprotocol_pessimist_sender_based_t
 #ifdef SB_USE_CONVERTOR_METHOD
     uintptr_t sb_conv_to_pessimist_offset; /* end of request from req_conv */
 #endif
-    
+    int sb_fd;              /* file descriptor of mapped file */    
-#if defined __WINDOWS__
-    HANDLE sb_fd;           /*  file handle of mapped file */
-    HANDLE sb_map;          /*  view handle of mapped file */
-#else
-    int sb_fd;              /* file descriptor of mapped file */
-#endif
-    
     off_t sb_offset;        /* offset in mmaped file          */
     uintptr_t sb_addr;      /* base address of mmaped segment */
     size_t sb_length;       /* length of mmaped segment */

ompi/mpi/CMakeLists.txt

@@ -1,20 +0,0 @@
-# Copyright (c) 2007-2012 High Performance Computing Center Stuttgart, 
-#                         University of Stuttgart.  All rights reserved.
-# $COPYRIGHT$
-# 
-# Additional copyrights may follow
-# 
-# $HEADER$
-#
-
-IF(OMPI_BUILD_CXX_BINDINGS)
-  ADD_SUBDIRECTORY(cxx)
-ELSE(OMPI_BUILD_CXX_BINDINGS)
-  MESSAGE(STATUS "Skipping MPI C++ interface")
-ENDIF(OMPI_BUILD_CXX_BINDINGS)
-
-IF(OMPI_WANT_FORTRAN_BINDINGS)
-  ADD_SUBDIRECTORY(fortran/mpif-h)
-ELSE(OMPI_WANT_FORTRAN_BINDINGS)
-  MESSAGE(STATUS "Skipping MPI FORTRAN interface")
-ENDIF(OMPI_WANT_FORTRAN_BINDINGS)

ompi/mpi/Makefile.am

@@ -17,8 +17,7 @@
 # $HEADER$
 #
 
-EXTRA_DIST += \
+EXTRA_DIST = \
-        mpi/CMakeLists.txt \
         mpi/fortran/configure-fortran-output-bottom.h
 
 dist_pkgdata_DATA += mpi/help-mpi-api.txt

ompi/mpi/c/wtick.c

@@ -43,14 +43,7 @@ double MPI_Wtick(void)
     OPAL_CR_NOOP_PROGRESS();
 
 #if OPAL_TIMER_USEC_NATIVE
-    /* We may or may not have native usec precision on Windows, so put
-       this #if before the #ifdef checking for Windows. */
     return 0.000001;
-#elif defined(__WINDOWS__)
-    if( (opal_timer_t)0 == opal_timer_base_get_freq() ) {
-        opal_output( 0, "No timer frequency\n" );
-    }
-    return (double)opal_timer_base_get_freq();
 #else
     /* Otherwise, we already return usec precision. */
     return 0.000001;

ompi/mpi/c/wtime.c

@@ -43,12 +43,7 @@ double MPI_Wtime(void)
     double wtime;
 
 #if OPAL_TIMER_USEC_NATIVE
-    /* We may or may not have native usec precision on Windows, so put
-       this #if before the #ifdef checking for Windows. */
     wtime = ((double) opal_timer_base_get_usec()) / 1000000.0;
-#elif defined(__WINDOWS__)
-    wtime = ((double) opal_timer_base_get_cycles()) /
-        ((double) opal_timer_base_get_freq());
 #else
     /* Fall back to gettimeofday() if we have nothing else */
     struct timeval tv;

ompi/mpi/cxx/CMakeLists.txt

@@ -1,55 +0,0 @@
-# Copyright (c) 2007-2011 High Performance Computing Center Stuttgart, 
-#                         University of Stuttgart.  All rights reserved.
-# $COPYRIGHT$
-# 
-# Additional copyrights may follow
-# 
-# $HEADER$
-#
-
-FILE(GLOB CXX_SOURCE_FILES "*.h" "*.c" "*.cc" "*.cpp")
-
-# skip the file interface sources if not wanted
-IF(NOT OMPI_PROVIDE_MPI_FILE_INTERFACE)
-  SET( TMP_SRC "" )
-  FOREACH ( FILENAME ${CXX_SOURCE_FILES})
-    GET_FILENAME_COMPONENT(relname ${FILENAME} NAME)
-    IF (NOT ${relname} MATCHES "file.*[ch]$")
-	  LIST(APPEND TMP_SRC ${FILENAME})
-    ENDIF (NOT ${relname} MATCHES "file.*[ch]$")
-  ENDFOREACH(FILENAME)
-  SET( CXX_SOURCE_FILES ${TMP_SRC})
-ENDIF(NOT OMPI_PROVIDE_MPI_FILE_INTERFACE)
-
-ADD_LIBRARY (libmpi_cxx ${CXX_SOURCE_FILES})
-
-SET_TARGET_PROPERTIES (libmpi_cxx PROPERTIES LINKER_LANGUAGE CXX PREFIX "" IMPORT_PREFIX "")
-
-# Set compile flags for this target
-IF (BUILD_SHARED_LIBS)
-
-  TARGET_LINK_LIBRARIES(libmpi_cxx libmpi libopen-pal)
-  # Need OMPI_BUILDING_CXX_BINDINGS_LIBRARY so that we can get the path 
-  # names correct inside the MPI C++ library.  OMPI_SKIP_MPICXX is necessary
-  # so that mpi.h doesn't include mpicxx.h through the incorrect pathname 
-  # in any of the C++ bindings .c files.  Just use the define for this purpose 
-  # from user code.
-  ADD_DEFINITIONS (-D_USRDLL -DOMPI_BUILDING 
-    -DOMPI_BUILDING_CXX_BINDINGS_LIBRARY=1  -DOMPI_SKIP_MPICXX=1
-    -DOMPI_IMPORTS -DOPAL_IMPORTS)
-
-ELSE (BUILD_SHARED_LIBS)
-  ADD_DEFINITIONS (-D_LIB -DOMPI_BUILDING
-    -DOMPI_BUILDING_CXX_BINDINGS_LIBRARY=1  -DOMPI_SKIP_MPICXX=1)
-ENDIF(BUILD_SHARED_LIBS)
-
-INSTALL(TARGETS libmpi_cxx
-        RUNTIME DESTINATION bin
-        LIBRARY DESTINATION lib
-        ARCHIVE DESTINATION lib)
-
-IF (OMPI_DEBUG_BUILD AND WINDOWS_VS)
-  INSTALL(FILES ${OpenMPI_BINARY_DIR}/Debug/libmpi_cxx${CMAKE_DEBUG_POSTFIX}.pdb
-    DESTINATION bin)
-ENDIF (OMPI_DEBUG_BUILD AND WINDOWS_VS)
-

ompi/mpi/cxx/Makefile.am

@@ -18,8 +18,6 @@
 # $HEADER$
 #
 
-EXTRA_DIST = CMakeLists.txt
-
 # Need the first so that we can get the path names correct inside the
 # MPI C++ library.  The second is necessary so that mpi.h doesn't
 # include mpicxx.h through the incorrect pathname in any of the C++

ompi/mpi/fortran/mpif-h/CMakeLists.txt

@@ -1,75 +0,0 @@
-# Copyright (c) 2008-2010 High Performance Computing Center Stuttgart, 
-#                         University of Stuttgart.  All rights reserved.
-# Copyright (c) 2012 Cisco Systems, Inc.  All rights reserved.
-# $COPYRIGHT$
-# 
-# Additional copyrights may follow
-# 
-# $HEADER$
-#
-
-FILE(GLOB OMPI_FORTRAN_FILES "*.c")
-FILE(GLOB OMPI_FORTRAN_HEADER_FILES "*.h")
-
-# Remove all MPI_File related files if the option is not selected
-IF (NOT OMPI_PROVIDE_MPI_FILE_INTERFACE)
-  MESSAGE( STATUS "Skipping the MPI I/O interface")
-  SET( TMP_SRC "" )
-  FOREACH ( FILENAME ${OMPI_FORTRAN_FILES})
-    GET_FILENAME_COMPONENT(relname ${FILENAME} NAME)
-    IF (NOT ${relname} MATCHES "file.*[ch]$")
-      IF (NOT ${relname} STREQUAL "register_datarep.c")
-        LIST(APPEND TMP_SRC ${FILENAME})
-      ENDIF (NOT ${relname} STREQUAL "register_datarep.c")
-    ENDIF(NOT ${relname} MATCHES "file.*[ch]$")
-  ENDFOREACH(FILENAME ${OMPI_FORTRAN_FILES})
-  SET( OMPI_FORTRAN_FILES ${TMP_SRC})
-ENDIF(NOT OMPI_PROVIDE_MPI_FILE_INTERFACE)
-
-SET_SOURCE_FILES_PROPERTIES(${OMPI_FORTRAN_FILES} PROPERTIES
-  COMPILE_FLAGS "${OMPI_C_DEF_PRE}OMPI_PROFILE_LAYER=0 ${OMPI_C_DEF_PRE}OMPI_COMPILING_FORTRAN_WRAPPERS=1")
-
-IF(OMPI_ENABLE_MPI_PROFILING)
-  # As weak symbols are not supported by MS compiler,
-  # we have to compile the C source files again for profiler,
-  # i.e. add the pre-processor "OMPI_PROFILING_DEFINES" explicitly.
-  
-  # copy the files to the build directory with a prefix.
-  FOREACH(FILE_NAME ${OMPI_FORTRAN_FILES})
-    GET_FILENAME_COMPONENT(relname ${FILE_NAME} NAME)
-    CONFIGURE_FILE(${FILE_NAME}
-                   ${PROJECT_BINARY_DIR}/profile/p${relname} [COPYONLY])
-  ENDFOREACH(FILE_NAME ${OMPI_FORTRAN_FILES})
-
-  FILE(GLOB OMPI_FORTRAN_PROFILE_FILES "${PROJECT_BINARY_DIR}/profile/*.c" )
-
-  SET_SOURCE_FILES_PROPERTIES(${OMPI_FORTRAN_PROFILE_FILES} PROPERTIES 
-    COMPILE_FLAGS "${OMPI_C_DEF_PRE}OMPI_PROFILE_LAYER=1 ${OMPI_C_DEF_PRE}OMPI_COMPILING_FORTRAN_WRAPPERS=1")
-
-  SET(OMPI_FORTRAN_FILES ${OMPI_FORTRAN_FILES} ${OMPI_FORTRAN_PROFILE_FILES})
-  SOURCE_GROUP(profile FILES  ${OMPI_FORTRAN_PROFILE_FILES})
-
-ELSE(OMPI_ENABLE_MPI_PROFILING)
-  MESSAGE( STATUS "Skipping the MPI profiling interface")
-ENDIF(OMPI_ENABLE_MPI_PROFILING)
-
-
-ADD_LIBRARY(libmpi_fortran ${OMPI_FORTRAN_FILES} ${OMPI_FORTRAN_HEADER_FILES})
-TARGET_LINK_LIBRARIES(libmpi_fortran libmpi)
-
-IF(BUILD_SHARED_LIBS)
-  ADD_DEFINITIONS(${OMPI_C_DEF_PRE}_USRDLL ${OMPI_C_DEF_PRE}OPAL_IMPORTS
-    ${OMPI_C_DEF_PRE}OMPI_IMPORTS ${OMPI_CXX_LAN_FLAG})
-ELSE(BUILD_SHARED_LIBS)
-  ADD_DEFINITIONS(${OMPI_C_DEF_PRE}_LIB)
-ENDIF(BUILD_SHARED_LIBS)
-
-INSTALL(TARGETS libmpi_fortran
-        RUNTIME DESTINATION bin
-        LIBRARY DESTINATION lib
-        ARCHIVE DESTINATION lib)
-
-IF (OMPI_DEBUG_BUILD AND WINDOWS_VS)
-  INSTALL(FILES ${OpenMPI_BINARY_DIR}/Debug/libmpi_fortran${CMAKE_DEBUG_POSTFIX}.pdb
-    DESTINATION bin)
-ENDIF (OMPI_DEBUG_BUILD AND WINDOWS_VS)

ompi/mpi/fortran/mpif-h/Makefile.am

@@ -18,8 +18,6 @@
 # $HEADER$
 #
 
-EXTRA_DIST = CMakeLists.txt
-
 SUBDIRS = profile
 
 #

ompi/mpi/java/c/mpi_MPI.c

@@ -41,12 +41,8 @@
 #endif
 
 #if OPAL_WANT_LIBLTDL
-  #ifndef __WINDOWS__
+  #if OPAL_LIBLTDL_INTERNAL
-    #if OPAL_LIBLTDL_INTERNAL
+    #include "opal/libltdl/ltdl.h"
-      #include "opal/libltdl/ltdl.h"
-    #else
-      #include "ltdl.h"
-    #endif
   #else
     #include "ltdl.h"
   #endif

ompi/runtime/ompi_mpi_params.c

@@ -10,7 +10,7 @@
  * Copyright (c) 2004-2005 The Regents of the University of California.
  *                         All rights reserved.
  * Copyright (c) 2006-2009 Cisco Systems, Inc.  All rights reserved.
- * Copyright (c) 2007-2012 Los Alamos National Security, LLC.  All rights
+ * Copyright (c) 2007-2013 Los Alamos National Security, LLC.  All rights
  *                         reserved. 
  * Copyright (c) 2013      NVIDIA Corporation.  All rights reserved.
  * $COPYRIGHT$
@@ -215,14 +215,14 @@ int ompi_mpi_register_params(void)
                                 /* If we do not have stack trace
                                    capability, make this a read-only
                                    MCA param */
-#if OPAL_WANT_PRETTY_PRINT_STACKTRACE && ! defined(__WINDOWS__) && defined(HAVE_BACKTRACE)
+#if OPAL_WANT_PRETTY_PRINT_STACKTRACE && defined(HAVE_BACKTRACE)
                                 false, 
 #else
                                 true,
 #endif
                                 (int) ompi_mpi_abort_print_stack,
                                 &value);
-#if OPAL_WANT_PRETTY_PRINT_STACKTRACE && ! defined(__WINDOWS__) && defined(HAVE_BACKTRACE)
+#if OPAL_WANT_PRETTY_PRINT_STACKTRACE && defined(HAVE_BACKTRACE)
     /* Only take the value if we have stack trace capability */
     ompi_mpi_abort_print_stack = OPAL_INT_TO_BOOL(value);
 #else

ompi/tools/CMakeLists.txt

@@ -1,144 +0,0 @@
-# Copyright (c) 2007-2011 High Performance Computing Center Stuttgart, 
-#                         University of Stuttgart.  All rights reserved.
-# Copyright (c) 2008      The University of Tennessee and The University
-#                         of Tennessee Research Foundation.  All rights
-#                         reserved.
-# $COPYRIGHT$
-# 
-# Additional copyrights may follow
-# 
-# $HEADER$
-#
-
-ADD_SUBDIRECTORY(ompi_info)
-
-
-MACRO(CONFIGURE_WRAPPER_DATA_FILE APP_NAME)
-
-  # mpic++ and mpicxx share the same input file
-  IF(${APP_NAME} STREQUAL "mpicxx")
-    SET(INPUT_PREFIX "mpic++")
-  ELSE(${APP_NAME} STREQUAL "mpicxx")
-    SET(INPUT_PREFIX ${APP_NAME})
-  ENDIF(${APP_NAME} STREQUAL "mpicxx")
-  
-  FILE(READ ${OpenMPI_SOURCE_DIR}/ompi/tools/wrappers/${INPUT_PREFIX}-wrapper-data.txt.in DATA_FILE)
-  STRING(REGEX REPLACE "-l[-a-zA-Z0-9_]+ " "" DATA_FILE ${DATA_FILE})
-
-  # create a temporary input file, for "write file" command only
-  # replace the variables in the first level. :(
-  FILE(WRITE ${OMPI_BINARY_DIR}/tools/wrappers/${APP_NAME}-wrapper-data.txt.in "${DATA_FILE}")
-
-  CONFIGURE_FILE(${OMPI_BINARY_DIR}/tools/wrappers/${APP_NAME}-wrapper-data.txt.in
-                 ${OMPI_BINARY_DIR}/tools/wrappers/${APP_NAME}${OMPI_EXE_DEBUG_POSTFIX}-wrapper-data.txt @ONLY)
-  INSTALL(FILES ${OMPI_BINARY_DIR}/tools/wrappers/${APP_NAME}${OMPI_EXE_DEBUG_POSTFIX}-wrapper-data.txt
-          DESTINATION share/openmpi)
-  CONFIGURE_FILE(${OMPI_BINARY_DIR}/tools/wrappers/${APP_NAME}-wrapper-data.txt.in
-                 ${OMPI_BINARY_DIR}/tools/wrappers/${APP_NAME}${OMPI_EXE_DEBUG_POSTFIX}.exe-wrapper-data.txt @ONLY)
-  INSTALL(FILES ${OMPI_BINARY_DIR}/tools/wrappers/${APP_NAME}${OMPI_EXE_DEBUG_POSTFIX}.exe-wrapper-data.txt
-          DESTINATION share/openmpi)
-ENDMACRO()
-
-
-# select debug or release libraries at configure time
-IF(WINDOWS_VS)
-  IF(OMPI_DEBUG_BUILD)
-    SET(OMPI_WRAPPER_BASE_LIBS
-      "libmpid.lib libopen-pald.lib libopen-rted.lib advapi32.lib Ws2_32.lib shlwapi.lib")
-  ELSE(OMPI_DEBUG_BUILD)
-    SET(OMPI_WRAPPER_BASE_LIBS
-      "libmpi.lib libopen-pal.lib libopen-rte.lib advapi32.lib Ws2_32.lib shlwapi.lib")
-  ENDIF(OMPI_DEBUG_BUILD)
-ELSEIF(WINDOWS_MINGW)
-  IF(OMPI_DEBUG_BUILD)
-    SET(OMPI_WRAPPER_BASE_LIBS "-lmpid")
-  ELSE(OMPI_DEBUG_BUILD)
-    SET(OMPI_WRAPPER_BASE_LIBS "-lmpi")
-  ENDIF(OMPI_DEBUG_BUILD)
-ENDIF(WINDOWS_VS)
-
-IF(BUILD_SHARED_LIBS)
-  SET(OMPI_WRAPPER_EXTRA_CFLAGS
-    "${OMPI_C_LAN_FLAG}")
-ELSE(BUILD_SHARED_LIBS)
-  IF(OMPI_DEBUG_BUILD)
-    SET(OMPI_WRAPPER_EXTRA_CFLAGS "${OMPI_C_LAN_FLAG} ${OMPI_C_MD_DEBUG}")
-  ELSE(OMPI_DEBUG_BUILD)
-    SET(OMPI_WRAPPER_EXTRA_CFLAGS "${OMPI_C_LAN_FLAG} ${OMPI_C_MD}")
-  ENDIF(OMPI_DEBUG_BUILD)
-ENDIF(BUILD_SHARED_LIBS)
-
-SET(OMPI_WRAPPER_EXTRA_LIBS ${OMPI_WRAPPER_BASE_LIBS})
-CONFIGURE_WRAPPER_DATA_FILE(mpicc)
-UNSET(OMPI_WRAPPER_EXTRA_LIBS)
-
-IF(OMPI_BUILD_CXX_BINDINGS)
-
-  # select debug or release libraries at configure time
-  IF(WINDOWS_VS)
-    IF(OMPI_DEBUG_BUILD)
-      SET(OMPI_WRAPPER_CXX_LIB "libmpi_cxxd.lib ${OMPI_WRAPPER_BASE_LIBS}")
-    ELSE(OMPI_DEBUG_BUILD)
-      SET(OMPI_WRAPPER_CXX_LIB "libmpi_cxx.lib ${OMPI_WRAPPER_BASE_LIBS}")
-    ENDIF(OMPI_DEBUG_BUILD)
-  ELSEIF(WINDOWS_MINGW)
-    IF(OMPI_DEBUG_BUILD)
-      SET(OMPI_WRAPPER_CXX_LIB "-lmpi_cxxd ${OMPI_WRAPPER_BASE_LIBS}")
-    ELSE(OMPI_DEBUG_BUILD)
-      SET(OMPI_WRAPPER_CXX_LIB "-lmpi_cxx ${OMPI_WRAPPER_BASE_LIBS}")
-    ENDIF(OMPI_DEBUG_BUILD)
-  ENDIF(WINDOWS_VS)
-
-  IF(BUILD_SHARED_LIBS)
-    SET(OMPI_WRAPPER_EXTRA_CXXFLAGS 
-      "${OMPI_CXX_LAN_FLAG} ${OMPI_CXX_EXCEPTION}")
-  ELSE(BUILD_SHARED_LIBS)
-    IF(OMPI_DEBUG_BUILD)
-      SET(OMPI_WRAPPER_EXTRA_CXXFLAGS "${OMPI_CXX_LAN_FLAG} ${OMPI_CXX_EXCEPTION} ${OMPI_C_MD_DEBUG}")
-    ELSE(OMPI_DEBUG_BUILD)
-      SET(OMPI_WRAPPER_EXTRA_CXXFLAGS "${OMPI_CXX_LAN_FLAG} ${OMPI_CXX_EXCEPTION} ${OMPI_C_MD}")
-    ENDIF(OMPI_DEBUG_BUILD)
-  ENDIF(BUILD_SHARED_LIBS)
-
-  CONFIGURE_WRAPPER_DATA_FILE(mpic++)
-  CONFIGURE_WRAPPER_DATA_FILE(mpicxx)
-ENDIF(OMPI_BUILD_CXX_BINDINGS)
-
-IF(OMPI_WANT_FORTRAN_BINDINGS)
-  # select debug or release libraries at configure time
-  IF(WINDOWS_VS)
-    IF(OMPI_DEBUG_BUILD)
-      SET(OMPI_WRAPPER_EXTRA_LIBS "libmpi_fortrand.lib ${OMPI_WRAPPER_BASE_LIBS}")
-    ELSE(OMPI_DEBUG_BUILD)
-      SET(OMPI_WRAPPER_EXTRA_LIBS "libmpi_fortran.lib ${OMPI_WRAPPER_BASE_LIBS}")
-    ENDIF(OMPI_DEBUG_BUILD)
-  ELSEIF(WINDOWS_MINGW)
-    IF(OMPI_DEBUG_BUILD)
-      SET(OMPI_WRAPPER_EXTRA_LIBS "-lmpi_fortrand ${OMPI_WRAPPER_BASE_LIBS}")
-    ELSE(OMPI_DEBUG_BUILD)
-      SET(OMPI_WRAPPER_EXTRA_LIBS "-lmpi_fortran ${OMPI_WRAPPER_BASE_LIBS}")
-    ENDIF(OMPI_DEBUG_BUILD)
-  ENDIF(WINDOWS_VS)
-
-  IF(BUILD_SHARED_LIBS)
-    SET(OMPI_WRAPPER_EXTRA_FFLAGS 
-      "")
-  ELSE(BUILD_SHARED_LIBS)
-    IF(OMPI_DEBUG_BUILD)
-      SET(OMPI_WRAPPER_EXTRA_FFLAGS "${FORTRAN_DYNAMIC_FLAG_DEBUG}")
-    ELSE(OMPI_DEBUG_BUILD)
-      SET(OMPI_WRAPPER_EXTRA_FFLAGS "${FORTRAN_DYNAMIC_FLAG}")
-    ENDIF(OMPI_DEBUG_BUILD)
-  ENDIF(BUILD_SHARED_LIBS)
-
-  CONFIGURE_WRAPPER_DATA_FILE(mpifort)
-  UNSET(OMPI_WRAPPER_EXTRA_LIBS)
-ENDIF(OMPI_WANT_FORTRAN_BINDINGS)
-
-#IF(OMPI_WANT_F90_BINDINGS)
-#  CONFIGURE_WRAPPER_DATA_FILE(mpif90)
-#ENDIF(OMPI_WANT_F90_BINDINGS)
-
-IF(WANT_INSTALL_HEADERS)
-  CONFIGURE_WRAPPER_DATA_FILE(opal-wrapper)
-ENDIF(WANT_INSTALL_HEADERS)

ompi/tools/Makefile.am

@@ -19,8 +19,6 @@
 
 # This makefile.am does not stand on its own - it is included from ompi/Makefile.am
 
-EXTRA_DIST += tools/win_makefile tools/CMakeLists.txt
-
 SUBDIRS += \
 	tools/ompi_info \
 	tools/wrappers

ompi/tools/ompi_info/CMakeLists.txt

@@ -1,26 +0,0 @@
-# Copyright (c) 2007-2010 High Performance Computing Center Stuttgart, 
-#                         University of Stuttgart.  All rights reserved.
-# $COPYRIGHT$
-# 
-# Additional copyrights may follow
-# 
-# $HEADER$
-#
-
-FILE(GLOB_RECURSE OMPI_INFO_SOURCE_FILES "*.h" "*.c" "*.cc" "*.cpp")
-ADD_EXECUTABLE (ompi_info ${OMPI_INFO_SOURCE_FILES})
-
-ADD_DEPENDENCIES(ompi_info libmpi)
-IF(BUILD_SHARED_LIBS)
-  SET_TARGET_PROPERTIES(ompi_info PROPERTIES
-     COMPILE_FLAGS "${OMPI_C_DEF_PRE}_USRDLL ${OMPI_C_DEF_PRE}OPAL_IMPORTS ${OMPI_C_DEF_PRE}OMPI_IMPORTS ${OMPI_C_DEF_PRE}ORTE_IMPORTS")
-  SET_SOURCE_FILES_PROPERTIES(${PROJECT_SOURCE_DIR}/tools/ompi_info/components.c PROPERTIES COMPILE_FLAGS "${OMPI_CXX_LAN_FLAG}")
-ENDIF(BUILD_SHARED_LIBS)
-
-SET_TARGET_PROPERTIES(ompi_info PROPERTIES
-  DEBUG_POSTFIX "${OMPI_EXE_DEBUG_POSTFIX}")
-
-TARGET_LINK_LIBRARIES (ompi_info libmpi libopen-rte libopen-pal Ws2_32.lib shlwapi.lib)
-
-INSTALL(TARGETS ompi_info
-  DESTINATION bin)

ompi/tools/ompi_info/Makefile.am

@@ -41,7 +41,7 @@ AM_CFLAGS = \
 include $(top_srcdir)/Makefile.man-page-rules
 
 man_pages = ompi_info.1
-EXTRA_DIST = $(man_pages:.1=.1in) CMakeLists.txt
+EXTRA_DIST = $(man_pages:.1=.1in)
 
 if OMPI_INSTALL_BINARIES
 

ompi/tools/win_makefile

@@ -1,172 +0,0 @@
-#!/bin/sh
-#
-# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
-#                         University Research and Technology
-#                         Corporation.  All rights reserved.
-# Copyright (c) 2004-2005 The University of Tennessee and The University
-#                         of Tennessee Research Foundation.  All rights
-#                         reserved.
-# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart, 
-#                         University of Stuttgart.  All rights reserved.
-# Copyright (c) 2004-2005 The Regents of the University of California.
-#                         All rights reserved.
-# $COPYRIGHT$
-# 
-# Additional copyrights may follow
-# 
-# $HEADER$
-#
-# This is a simple makefile for windows which makes all the components
-# which are required for super computing. Too lazy to open up visual
-# studio each and every time to compile a component, so just adding
-# this to the svn repository
-#
-
-topdir := $(shell cygpath -m $(CURDIR))/../..
-installdir = ${topdir}/src/Debug
-libdir = ${installdir}/lib
-bindir = ${installdir}/bin
-incdir = ${installdir}/include
-
-# list of components to build with the c compiler
-C_SUBDIRS = \
-        orted
-
-# list of components to build with the cpp compiler
-# (because of the problem with OBJ_CLASS_INSTANCE)
-CPP_SUBDIRS = \
-        ompi_info
-
-CC = cl
-
-INCL = \
-        /I"${topdir}/src/win32/generated_include" \
-        /I"${topdir}/src/win32" \
-        /I"${topdir}/include" \
-        /I"${topdir}/src" \
-        /I"${topdir}/src/event/compat/" \
-        /I"${topdir}/src/event" \
-        /I"${topdir}/src/event/WIN32-Code/" 
-
-CFLAGS = \
-        /DWIN32 \
-        /DHAVE_CONFIG_H \
-        /DOMPI_SYSCONFDIR="\"${installdir}/share\"" \
-        /DOMPI_BUILDING_WIN_DSO=1 \
-        /EHsc \
-        /ML \
-        /W0 \
-        /Wp64 \
-        /TC \
-        /D_MBCS \
-        /LD\
-        /nologo \
-        /c
-
-CPPFLAGS = \
-        /DWIN32 \
-        /TP \
-        /DHAVE_CONFIG_H \
-        /DOMPI_SYSCONFDIR="\"${installdir}/share\"" \
-		  /DOMPI_BUILDING_WIN_DSO=1 \
-        /EHsc \
-        /ML \
-        /W0 \
-        /Wp64 \
-        /D_MBCS \
-        /LD \
-        /nologo \
-        /c
-
-ADD_INCL = \
-        /DOMPI_BUILD_USER="\"not implemented\"" \
-        /DOMPI_BUILD_DATE="\"not implemented\"" \
-        /DOMPI_BUILD_HOST="\"not implemented\"" \
-        /DOMPI_WANT_SVN="\"not implemented\"" \
-        /DOMPI_SVN_R="\"not implemented\"" \
-        /DOPAL_CONFIGURE_USER="\"not implemented\"" \
-        /DOPAL_CONFIGURE_DATE="\"not implemented\"" \
-        /DOPAL_CONFIGURE_HOST="\"not implemented\"" \
-        /DOMPI_BUILD_CFLAGS="\"not implemented\"" \
-        /DOMPI_BUILD_CXXFLAGS="\"not implemented\"" \
-        /DOMPI_BUILD_FFLAGS="\"not implemented\"" \
-        /DOMPI_BUILD_FCFLAGS="\"not implemented\"" \
-        /DOMPI_BUILD_LDFLAGS="\"not implemented\"" \
-        /DOMPI_BUILD_LIBS="\"not implemented\"" \
-        /DOMPI_MAJOR_VERSION=1 \
-        /DOMPI_MINOR_VERSION=0 \
-        /DOMPI_RELEASE_VERSION=0 \
-        /DOMPI_ALPHA_VERSION=0 \
-        /DOMPI_BETA_VERSION=0 \
-        /DOMPI_SVN_VERSION=0 \
-        /DOMPI_PREFIX="\"${prefix}\"" \
-        /DOMPI_BINDIR="\"${bindir}\"" \
-        /DOMPI_LIBDIR="\"${libdir}\"" \
-        /DOMPI_INCDIR="\"${incdir}\"" \
-        /DOMPI_PKGLIBDIR="\"${libdir}\"" 
-
-
-# link with ompi.lib to resolve external symbols
-OMPILIB = \
-        "${topdir}/src/libmpi.lib"
-
-LINK = link
-
-LINKFLAGS = \
-        /OPT:NOICF \
-        /OPT:NOREF \
-        /DEFAULTLIB:${OMPILIB} \
-        /nologo
-
-ADDLIBS = \
-        ws2_32.lib \
-        kernel32.lib \
-        user32.lib \
-        gdi32.lib \
-        winspool.lib \
-        comdlg32.lib \
-        advapi32.lib \
-        shell32.lib \
-        ole32.lib \
-        oleaut32.lib \
-        uuid.lib \
-        odbc32.lib \
-        odbccp32.lib
-
-all: \
-    cexes \
-    cppexecs
-
-cexes: ${C_SUBDIRS}
-	@for dirs in ${C_SUBDIRS}; do \
-	    (echo "Entering $$dirs"; cd $$dirs; \
-			${CC} ${CFLAGS} ${INCL} *.c; ${LINK} ${LINKFLAGS} ${ADDLIBS} *.obj;); \
-	done
-
-cppexecs: ${CPP_SUBDIRS}
-	@for dirs in ${CPP_SUBDIRS}; do \
-	    (echo "Entering $$dirs"; cd $$dirs; \
-			${CC} ${CPPFLAGS} ${INCL} ${ADD_INCL} *.cc; ${LINK} ${LINKFLAGS} ${ADDLIBS} *.obj;); \
-	done
-
-install: win_makefile
-	@echo -n "Installing components ......................."
-	@for dirs in ${C_SUBDIRS}; do \
-        install -d ${CURDIR}/$${dirs}/ ${bindir}; \
-        install -p ${CURDIR}/$${dirs}/$${dirs}.exe ${installdir}/$${dirs}.exe; \
-	done
-	@for dirs in ${CPP_SUBDIRS}; do \
-        install -d ${CURDIR}/$${dirs}/ ${bindir}; \
-        install -p ${CURDIR}/$${dirs}/$${dirs}.exe ${installdir}/$${dirs}.exe; \
-	done
-	@echo "done"
-
-.PHONY: clean
-
-clean:
-	@for dirs in ${C_SUBDIRS}; do \
-	    (echo "Entering $$dirs"; cd $$dirs; rm -rf *.lib *.obj *.exp;); \
-	done
-	@for dirs in ${CPP_SUBDIRS}; do \
-	    (echo "Entering $$dirs"; cd $$dirs; rm -rf *.lib *.obj *.exp;); \
-	done

opal/CMakeLists.txt

@@ -1,176 +0,0 @@
-# Copyright (c) 2007-2010 High Performance Computing Center Stuttgart, 
-#                         University of Stuttgart.  All rights reserved.
-# $COPYRIGHT$
-# 
-# Additional copyrights may follow
-# 
-# $HEADER$
-#
-
-
-PROJECT (OPAL)
-
-
-
-# Add include sub directory to gernerate opal_config.h
-ADD_SUBDIRECTORY (include)
-
-# These two files need to be compiled twice, one time with preprocessor CHECKSUM.
-# Make one copy of them with another file name and add them into the project.
-CONFIGURE_FILE(datatype/opal_datatype_pack.c ${PROJECT_BINARY_DIR}/datatype/opal_datatype_pack_checksum.c [COPYONLY])
-CONFIGURE_FILE(datatype/opal_datatype_unpack.c ${PROJECT_BINARY_DIR}/datatype/opal_datatype_unpack_checksum.c [COPYONLY])
-
-SET(DATATYPE_CHECKSUM_FILES ${PROJECT_BINARY_DIR}/datatype/opal_datatype_pack_checksum.c
-                            ${PROJECT_BINARY_DIR}/datatype/opal_datatype_unpack_checksum.c )
-
-SET_SOURCE_FILES_PROPERTIES(${DATATYPE_CHECKSUM_FILES}
-                            PROPERTIES COMPILE_DEFINITIONS CHECKSUM)
-SET(OPAL_SOURCE_FILES ${OPAL_SOURCE_FILES} ${DATATYPE_CHECKSUM_FILES})
-SOURCE_GROUP(datatype FILES  ${DATATYPE_CHECKSUM_FILES})
-
-IF(OPAL_WANT_LIBLTDL)
-  INCLUDE(find_libltdl)
-ENDIF(OPAL_WANT_LIBLTDL)
-
-
-# Include headers.
-FILE(GLOB OPAL_INCLUDE_FILES "include/*.h" "include/opal/*.h" "include/opal/sys/win32/*.h")
-SOURCE_GROUP(include FILES ${OPAL_INCLUDE_FILES})
-
-SET (OPAL_SOURCE_FILES
-  ${OPAL_SOURCE_FILES}
-  ${OPAL_EVENT_FILES}
-  ${OPAL_INCLUDE_FILES}
-)
-
-# Recuresive search sub directories excluding mca, event, include and tools. 
-# Add sources in different source groups.
-INCLUDE(list_subdirs)
-CHECK_SUBDIRS("${PROJECT_SOURCE_DIR}" OPAL_SUBDIRS)
-
-SET(OPAL_EXCLUDE_SUBDIRS event include libltdl mca tools)
-
-FOREACH(OPAL_SUBDIR ${OPAL_SUBDIRS})
-
-  LIST(FIND OPAL_EXCLUDE_SUBDIRS ${OPAL_SUBDIR} OPAL_EXCLUDE_SUBDIR)
-
-  IF(${OPAL_EXCLUDE_SUBDIR} EQUAL -1)
-      
-    FILE(GLOB_RECURSE OPAL_${OPAL_SUBDIR}_FILES 
-      "${OPAL_SUBDIR}/*.h" "${OPAL_SUBDIR}/*.c" "${OPAL_SUBDIR}/*.cc" "${OPAL_SUBDIR}/*.cpp")
-      
-      SET (OPAL_SOURCE_FILES
-        ${OPAL_SOURCE_FILES}
-        ${OPAL_${OPAL_SUBDIR}_FILES}
-      )
-      
-      SOURCE_GROUP("${OPAL_SUBDIR}" FILES ${OPAL_${OPAL_SUBDIR}_FILES})
-      
-  ENDIF(${OPAL_EXCLUDE_SUBDIR} EQUAL -1)
-
-ENDFOREACH(OPAL_SUBDIR ${OPAL_SUBDIRS})
-
-# remove non-mca files that shouldn't be compiled under windows
-LIST(REMOVE_ITEM OPAL_SOURCE_FILES "${PROJECT_SOURCE_DIR}/datatype/opal_datatype_cuda.c"
-  "${PROJECT_SOURCE_DIR}/datatype/opal_datatype_cuda.h")
-
-#only generate if it's not a tarball
-IF(NOT EXISTS ${PROJECT_SOURCE_DIR}/util/keyval/keyval_lex.c)
-  ADD_FLEX_FILE(OPAL_SOURCE_FILES ./util/keyval/keyval_lex.l
-    opal_util_keyval_yy "${PROJECT_BINARY_DIR}/util/keyval/")
-ENDIF(NOT EXISTS ${PROJECT_SOURCE_DIR}/util/keyval/keyval_lex.c)
-
-IF(NOT EXISTS ${PROJECT_SOURCE_DIR}/util/show_help_lex.c)
-  ADD_FLEX_FILE(OPAL_SOURCE_FILES ./util/show_help_lex.l
-    opal_show_help_yy "${PROJECT_BINARY_DIR}/util/")
-ENDIF(NOT EXISTS ${PROJECT_SOURCE_DIR}/util/show_help_lex.c)
-
-
-# Add source files from mca subdirectories.
-INCLUDE (check_mca_subdirs)
-SET (OPAL_SOURCE_FILES ${OPAL_SOURCE_FILES} ${MCA_FILES})
-
-
-ADD_LIBRARY (libopen-pal ${OPAL_SOURCE_FILES})
-
-
-IF(WINDOWS_MINGW)
-  SET(CMAKE_CXX_STANDARD_LIBRARIES "${CMAKE_CXX_STANDARD_LIRARIES} -lpthread")
-  SET(CMAKE_C_STANDARD_LIBRARIES "${CMAKE_CXX_STANDARD_LIRARIES} -lpthread")
-ENDIF(WINDOWS_MINGW)
-
-# Set compile flags for this target
-IF (BUILD_SHARED_LIBS)
-  IF(WINDOWS_MINGW)
-    ADD_CUSTOM_COMMAND(TARGET libopen-pal POST_BUILD
-      COMMAND ar -rcs ${OpenMPI_BINARY_DIR}/event${CMAKE_DEBUG_POSTFIX}.lib ${EVENT_OBJ_FILES}
-      WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
-      COMMENT "Generating static event library."
-    )
-    ADD_CUSTOM_COMMAND(TARGET libopen-pal POST_BUILD
-      COMMAND ar -rcs ${OpenMPI_BINARY_DIR}/hwloc${CMAKE_DEBUG_POSTFIX}.lib ${HWLOC_OBJ_FILES}
-      WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
-      COMMENT "Generating static hwloc library."
-    )
-  ELSEIF(WINDOWS_VS)
-    ADD_CUSTOM_COMMAND(TARGET libopen-pal POST_BUILD
-      COMMAND ${OMPI_LIB_CMD} ${OMPI_LIB_CMD_OUTPUT}${OpenMPI_BINARY_DIR}/${CMAKE_CFG_INTDIR}/event${CMAKE_DEBUG_POSTFIX}.lib ${EVENT_OBJ_FILES}
-      WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
-      COMMENT "Generating static event library."
-    )
-    ADD_CUSTOM_COMMAND(TARGET libopen-pal POST_BUILD
-      COMMAND ${OMPI_LIB_CMD} ${OMPI_LIB_CMD_OUTPUT}${OpenMPI_BINARY_DIR}/${CMAKE_CFG_INTDIR}/hwloc${CMAKE_DEBUG_POSTFIX}.lib ${HWLOC_OBJ_FILES}
-      WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
-      COMMENT "Generating static hwloc library."
-    )
-  ENDIF(WINDOWS_MINGW)
-
-  SET_TARGET_PROPERTIES(libopen-pal PROPERTIES COMPILE_DEFINITIONS "_USRDLL;OPAL_EXPORTS"
-                                    PREFIX "" IMPORT_PREFIX "")
-  IF(OPAL_WANT_LIBLTDL AND LIBLTDL_FOUND)
-    INCLUDE_DIRECTORIES(${LIBLTDL_INCLUDE_PATH})
-    TARGET_LINK_LIBRARIES (libopen-pal Ws2_32.lib shlwapi.lib ${LIBLTDL_LIB})
-  ELSE(OPAL_WANT_LIBLTDL AND LIBLTDL_FOUND)
-    TARGET_LINK_LIBRARIES (libopen-pal Ws2_32.lib shlwapi.lib)
-  ENDIF(OPAL_WANT_LIBLTDL AND LIBLTDL_FOUND)
-ELSE (BUILD_SHARED_LIBS)
-  SET_TARGET_PROPERTIES(libopen-pal PROPERTIES COMPILE_DEFINITIONS _LIB)
-ENDIF(BUILD_SHARED_LIBS)
-
-# Generate install_dirs.h
-SET(prefix ${CMAKE_INSTALL_PREFIX})
-SET(bindir ${prefix}/bin)
-SET(sbindir ${prefix}/sbin)
-SET(libexecdir ${prefix}/libexec)
-SET(datarootdir ${prefix}/share)
-SET(datadir ${prefix}/share)
-SET(PACKAGE "openmpi")
-SET(sysconfdir ${prefix}/etc)
-SET(sharedstatedir ${prefix}/com)
-SET(localstatedir ${prefix}/var)
-SET(libdir ${prefix}/lib)
-SET(includedir ${prefix}/include)
-SET(infodir ${datarootdir}/info)
-SET(mandir ${datarootdir}/man)
-CONFIGURE_FILE(${OpenMPI_SOURCE_DIR}/opal/mca/installdirs/config/install_dirs.h.in
-  ${OpenMPI_BINARY_DIR}/opal/mca/installdirs/config/install_dirs.h)
-
-# generate version.h
-CONFIGURE_FILE(${OpenMPI_SOURCE_DIR}/opal/include/opal/version.h.in  ${OpenMPI_BINARY_DIR}/opal/include/opal/version.h)
-
-ADD_SUBDIRECTORY(tools)
-
-# Install libraries, shared files.
-INSTALL(TARGETS libopen-pal
-        RUNTIME DESTINATION bin
-        LIBRARY DESTINATION lib
-        ARCHIVE DESTINATION lib)
-INSTALL(FILES runtime/help-opal-runtime.txt
-    mca/base/help-mca-base.txt
-    mca/base/help-mca-param.txt
-    DESTINATION share/openmpi)
-
-IF (OMPI_DEBUG_BUILD AND WINDOWS_VS)
-  INSTALL(FILES ${OpenMPI_BINARY_DIR}/Debug/libopen-pal${CMAKE_DEBUG_POSTFIX}.pdb
-    DESTINATION bin)
-ENDIF (OMPI_DEBUG_BUILD AND WINDOWS_VS)

opal/Makefile.am

@@ -17,8 +17,6 @@
 # $HEADER$
 #
 
-EXTRA_DIST = CMakeLists.txt
-
 SUBDIRS = \
 	include \
         $(LIBLTDL_SUBDIR) \
@@ -83,6 +81,5 @@ include memoryhooks/Makefile.am
 include runtime/Makefile.am
 include threads/Makefile.am
 include mca/Makefile.am
-include win32/Makefile.am
 include tools/Makefile.am
 include dss/Makefile.am

opal/include/CMakeLists.txt

@@ -1,45 +0,0 @@
-#
-# Copyright (c) 2007-2012 High Performance Computing Center Stuttgart, 
-#                         University of Stuttgart.  All rights reserved.
-# Copyright (c) 2008      The University of Tennessee and The University
-#                         of Tennessee Research Foundation.  All rights
-#                         reserved.
-# $COPYRIGHT$
-# 
-# Additional copyrights may follow
-# 
-# $HEADER$
-#
-
-# make a temporary copy of the input file
-FILE(READ ${OpenMPI_SOURCE_DIR}/ompi/include/mpi.h.in MPI_H_IN)
-
-# change the syntax of the copy into CMake understandable
-STRING(REGEX REPLACE "#undef ([-_a-zA-Z0-9]+)[ ]*\n" "#cmakedefine \\1 \${\\1}\n" MPI_H_OUT "${MPI_H_IN}")
-STRING(REPLACE "#cmakedefine OMPI_HAVE_FORTRAN_" "#define OMPI_HAVE_FORTRAN_"  MPI_H_OUT "${MPI_H_OUT}")
-STRING(REPLACE "{OMPI_PROVIDE_MPI_FILE_INTERFACE}"
- "{OMPI_PROVIDE_MPI_FILE_INTERFACE}" MPI_H_OUT "${MPI_H_OUT}")
-STRING(REPLACE "\${OMPI_BUILD_CXX_BINDINGS}" "1" MPI_H_OUT "${MPI_H_OUT}")
-STRING(REPLACE "\${OMPI_WANT_FORTRAN_BINDINGS}" "1" MPI_H_OUT "${MPI_H_OUT}")
-STRING(REPLACE "\${OMPI_WANT_F90_BINDINGS}" "1" MPI_H_OUT "${MPI_H_OUT}")
-STRING(REPLACE "\${OMPI_WANT_MPI_CXX_SEEK}" "1" MPI_H_OUT "${MPI_H_OUT}")
-STRING(REPLACE "\${OMPI_WANT_MPI_INTERFACE_WARNING}" "1" MPI_H_OUT "${MPI_H_OUT}")
-
-FILE(WRITE ${OpenMPI_BINARY_DIR}/ompi/include/mpi.h.in "${MPI_H_OUT}")
-
-# generate mpi.h
-CONFIGURE_FILE(${OpenMPI_BINARY_DIR}/ompi/include/mpi.h.in ${OpenMPI_BINARY_DIR}/ompi/include/mpi.h)
-
-
-#define OMPI/ORTE/OPAL_IMPORTS in mpi.h, then we dont't need to define it in the command line or solution config.
-#this mpi.h is used only for user programs
-STRING(REPLACE "define OMPI_MPI_H" 
-  "define OMPI_MPI_H\n\n#define OMPI_IMPORTS\n#define OPAL_IMPORTS\n#define ORTE_IMPORTS" MPI_H_OUT "${MPI_H_OUT}")
-FILE(WRITE ${OpenMPI_BINARY_DIR}/ompi/include/user/mpi.h.in "${MPI_H_OUT}")
-CONFIGURE_FILE(${OpenMPI_BINARY_DIR}/ompi/include/user/mpi.h.in ${OpenMPI_BINARY_DIR}/ompi/include/user/mpi.h)
-
-IF(OMPI_WANT_FORTRAN_BINDINGS)
-  CONFIGURE_FILE(${OpenMPI_SOURCE_DIR}/ompi/include/mpif.h.in ${OpenMPI_BINARY_DIR}/ompi/include/mpif.h)
-  CONFIGURE_FILE(${OpenMPI_SOURCE_DIR}/ompi/include/mpif-common.h.fin ${OpenMPI_BINARY_DIR}/ompi/include/mpif-common.h)
-  CONFIGURE_FILE(${OpenMPI_SOURCE_DIR}/ompi/include/mpif-config.h.in ${OpenMPI_BINARY_DIR}/ompi/include/mpif-config.h)
-ENDIF(OMPI_WANT_FORTRAN_BINDINGS)

opal/include/Makefile.am

@@ -27,7 +27,7 @@ nodist_headers = opal_config.h
 
 include opal/Makefile.am
 
-EXTRA_DIST = CMakeLists.txt $(headers)
+EXTRA_DIST = $(headers)
 
 if WANT_INSTALL_HEADERS 
 opaldir = $(includedir)/openmpi

opal/include/opal/opal_socket_errno.h

@@ -18,121 +18,9 @@
 #ifndef OPAL_GET_SOCKET_ERROR_H
 #define OPAL_GET_SOCKET_ERROR_H
 
-/* In windows, sockets return differnt error codes than the linux counter parts. Although,
-   one can find there are some similarities in the naming, there are definite differences.
-   opal_socket_errno is defined to be errno under linux and opal_get_socket_errno under
-   windows to ensure that the code which uses errno does not have to be changed. In windows,
-   the mapping is taken care of by opal_get_socket_errno().
-   
-   ANYONE USING SOCKET FUNCTIONS' RETURN VALUE PLEASE USE opal_socket_errno INSTEAD
-   OF errno FOR COMPATIBILITY  */
-
 #include <errno.h>
 #include "opal/constants.h"
-#ifdef __WINDOWS__
-#define opal_socket_errno opal_get_socket_errno()
 
-/* some of these have been defined in newer version of errno.h*/
-#if (defined(__WINDOWS__) && !defined(_MSC_VER)) || _MSC_VER < 1600
-
-#define EWOULDBLOCK       WSAEWOULDBLOCK
-#define EINPROGRESS       WSAEINPROGRESS
-#define EALREADY          WSAEALREADY
-#define ENOTSOCK          WSAENOTSOCK
-#define EDESTADDRREQ      WSAEDESTADDRREQ
-#define EMSGSIZE          WSAEMSGSIZE
-#define EPROTOTYPE        WSAEPROTOTYPE
-#define ENOPROTOOPT       WSAENOPROTOOPT
-#define EPROTONOSUPPORT   WSAEPROTONOSUPPORT
-#define EOPNOTSUPP        WSAEOPNOTSUPP
-#define EAFNOSUPPORT      WSAEAFNOSUPPORT
-#define EADDRINUSE        WSAEADDRINUSE
-#define EADDRNOTAVAIL     WSAEADDRNOTAVAIL
-#define ENETDOWN          WSAENETDOWN
-#define ENETUNREACH       WSAENETUNREACH
-#define ENETRESET         WSAENETRESET
-#define ECONNABORTED      WSAECONNABORTED
-#define ECONNRESET        WSAECONNRESET
-#define ENOBUFS           WSAENOBUFS
-#define EISCONN           WSAEISCONN
-#define ENOTCONN          WSAENOTCONN
-#define ETIMEDOUT         WSAETIMEDOUT
-#define ECONNREFUSED      WSAECONNREFUSED
-#define ELOOP             WSAELOOP
-#define EHOSTUNREACH      WSAEHOSTUNREACH
-
-#endif /*defined(_MSC_VER) && _MSC_VER < 1600*/
-
-#define ESOCKTNOSUPPORT   WSAESOCKTNOSUPPORT
-#define EPFNOSUPPORT      WSAEPFNOSUPPORT
-#define ESHUTDOWN         WSAESHUTDOWN
-#define ETOOMANYREFS      WSAETOOMANYREFS
-#define EHOSTDOWN         WSAEHOSTDOWN
-#define EPROCLIM          WSAEPROCLIM
-#define EUSERS            WSAEUSERS
-#define EDQUOT            WSAEDQUOT
-#define ESTALE            WSAESTALE
-#define EREMOTE           WSAEREMOTE
-
-/*
- * pound define opal_get_error() to be opal_errno. so, in windows land
- * this simply defaults to being errno
- */
-
-/* return directly from the case statments */
-
-static __inline int opal_get_socket_errno(void) {
-    int ret = WSAGetLastError();
-    switch (ret) {
-      case WSAEINTR: return EINTR; 
-      case WSAEBADF: return EBADF; 
-      case WSAEACCES: return EACCES;           
-      case WSAEFAULT: return EFAULT;          
-      case WSAEINVAL: return EINVAL;          
-      case WSAEMFILE: return EMFILE;          
-      case WSAEWOULDBLOCK: return EWOULDBLOCK;      
-      case WSAEINPROGRESS: return EINPROGRESS;     
-      case WSAEALREADY: return EALREADY;         
-      case WSAENOTSOCK: return ENOTSOCK;        
-      case WSAEDESTADDRREQ: return EDESTADDRREQ;     
-      case WSAEMSGSIZE: return EMSGSIZE;       
-      case WSAEPROTOTYPE: return EPROTOTYPE;       
-      case WSAENOPROTOOPT: return ENOPROTOOPT;     
-      case WSAEPROTONOSUPPORT: return EPROTONOSUPPORT;  
-      case WSAESOCKTNOSUPPORT: return ESOCKTNOSUPPORT; 
-      case WSAEOPNOTSUPP: return EOPNOTSUPP;      
-      case WSAEPFNOSUPPORT: return EPFNOSUPPORT;    
-      case WSAEAFNOSUPPORT: return EAFNOSUPPORT;    
-      case WSAEADDRINUSE: return EADDRINUSE;      
-      case WSAEADDRNOTAVAIL: return EADDRNOTAVAIL;    
-      case WSAENETDOWN: return ENETDOWN;       
-      case WSAENETUNREACH: return ENETUNREACH;      
-      case WSAENETRESET: return ENETRESET;      
-      case WSAECONNABORTED: return ECONNABORTED;     
-      case WSAECONNRESET: return ECONNRESET;      
-      case WSAENOBUFS: return ENOBUFS;         
-      case WSAEISCONN: return EISCONN;         
-      case WSAENOTCONN: return ENOTCONN;        
-      case WSAESHUTDOWN: return ESHUTDOWN;        
-      case WSAETOOMANYREFS: return ETOOMANYREFS;    
-      case WSAETIMEDOUT: return ETIMEDOUT;       
-      case WSAECONNREFUSED: return ECONNREFUSED;    
-      case WSAELOOP: return ELOOP;           
-      case WSAENAMETOOLONG: return ENAMETOOLONG;    
-      case WSAEHOSTDOWN: return EHOSTDOWN;       
-      case WSAEHOSTUNREACH: return EHOSTUNREACH;    
-      case WSAENOTEMPTY: return ENOTEMPTY;       
-      case WSAEPROCLIM: return EPROCLIM;        
-      case WSAEUSERS: return EUSERS;          
-      case WSAEDQUOT: return EDQUOT;          
-      case WSAESTALE: return ESTALE;          
-      case WSAEREMOTE: return EREMOTE;         
-      default: printf("Feature not implemented: %d %s\n", __LINE__, __FILE__); return OPAL_ERROR;
-    };                                
-}
-
-#else 
 #define opal_socket_errno errno
-#endif
 
 #endif /* OPAL_GET_ERROR_H */

opal/include/opal/sys/Makefile.am

@@ -35,5 +35,4 @@ include opal/sys/ia64/Makefile.am
 include opal/sys/mips/Makefile.am
 include opal/sys/powerpc/Makefile.am
 include opal/sys/sparcv9/Makefile.am
-include opal/sys/win32/Makefile.am
 include opal/sys/sync_builtin/Makefile.am

opal/include/opal/sys/architecture.h

@@ -26,7 +26,6 @@
 
 /* Architectures */
 #define OMPI_UNSUPPORTED    0000
-#define OMPI_WINDOWS        0001
 #define OMPI_IA32           0010
 #define OMPI_IA64           0020
 #define OMPI_AMD64          0030

opal/include/opal/sys/atomic.h

@@ -139,9 +139,6 @@ typedef struct opal_atomic_lock_t opal_atomic_lock_t;
  *********************************************************************/
 #if defined(DOXYGEN)
 /* don't include system-level gorp when generating doxygen files */ 
-#elif OPAL_ASSEMBLY_ARCH == OMPI_WINDOWS
-/* windows first, as they have API-level primitives for this stuff */
-#include "opal/sys/win32/atomic.h"
 #elif OPAL_ASSEMBLY_ARCH == OMPI_ALPHA
 #include "opal/sys/alpha/atomic.h"
 #elif OPAL_ASSEMBLY_ARCH == OMPI_AMD64

opal/include/opal/sys/timer.h

@@ -93,8 +93,6 @@ BEGIN_C_DECLS
 #include "opal/sys/sparcv9/timer.h"
 #elif OPAL_ASSEMBLY_ARCH == OMPI_SPARCV9_64
 #include "opal/sys/sparcv9/timer.h"
-#elif OPAL_ASSEMBLY_ARCH == OMPI_WINDOWS
-#include "opal/sys/win32/timer.h"
 #elif OPAL_ASSEMBLY_ARCH == OMPI_MIPS
 #include "opal/sys/mips/timer.h"
 #endif

opal/include/opal/sys/win32/Makefile.am

@@ -1,23 +0,0 @@
-#
-# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
-#                         University Research and Technology
-#                         Corporation.  All rights reserved.
-# Copyright (c) 2004-2005 The University of Tennessee and The University
-#                         of Tennessee Research Foundation.  All rights
-#                         reserved.
-# Copyright (c) 2004-2009 High Performance Computing Center Stuttgart, 
-#                         University of Stuttgart.  All rights reserved.
-# Copyright (c) 2004-2005 The Regents of the University of California.
-#                         All rights reserved.
-# $COPYRIGHT$
-# 
-# Additional copyrights may follow
-# 
-# $HEADER$
-#
-
-# This makefile.am does not stand on its own - it is included from opal/include/Makefile.am
-
-headers += \
-	opal/sys/win32/atomic.h \
-	opal/sys/win32/timer.h

opal/include/opal/sys/win32/atomic.h

@@ -1,178 +0,0 @@
-/*
- * Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
- *                         University Research and Technology
- *                         Corporation.  All rights reserved.
- * Copyright (c) 2004-2006 The University of Tennessee and The University
- *                         of Tennessee Research Foundation.  All rights
- *                         reserved.
- * Copyright (c) 2004-2005 High Performance Computing Center Stuttgart, 
- *                         University of Stuttgart.  All rights reserved.
- * Copyright (c) 2004-2005 The Regents of the University of California.
- *                         All rights reserved.
- * $COPYRIGHT$
- * 
- * Additional copyrights may follow
- * 
- * $HEADER$
- */
-
-#ifndef OMPI_SYS_ARCH_ATOMIC_H
-#define OMPI_SYS_ARCH_ATOMIC_H 1
-
-#include <windows.h>
-#if defined(HAVE_WDM_H)
-#include <wdm.h>
-#endif  /* HAVE_WDM_H */
-
-/**********************************************************************
- *
- * Memory Barriers
- *
- *********************************************************************/
-#define OPAL_HAVE_ATOMIC_MEM_BARRIER 1
-
-static inline void opal_atomic_mb(void)
-{    
-#if defined(HAVE_WDM_H)
-   return KeMemoryBarrier();
-#endif  /* HAVE_WDM_H */
-}
-
-static inline void opal_atomic_rmb(void)
-{
-#if defined(HAVE_WDM_H)
-   return KeMemoryBarrier();
-#endif  /* HAVE_WDM_H */
-}
-
-static inline void opal_atomic_wmb(void)
-{    
-#if defined(HAVE_WDM_H)
-   return KeMemoryBarrier();
-#endif  /* HAVE_WDM_H */
-}
-
-/**********************************************************************
- *
- * Atomic math operations
- *
- *********************************************************************/
-
-#define OPAL_HAVE_ATOMIC_CMPSET_32 1
-static inline int opal_atomic_cmpset_acq_32( volatile int32_t *addr,
-                                             int32_t oldval, int32_t newval)
-{
-#if HAVE_INTERLOCKEDCOMPAREEXCHANGEACQUIRE
-   int32_t ret = InterlockedCompareExchangeAcquire( (long volatile*)addr,
-                                                    (long)newval, (long)oldval);
-#else
-   int32_t ret = InterlockedCompareExchange( (long volatile*)addr,
-                                             (long)newval, (long)oldval );
-#endif  /* HAVE_INTERLOCKEDCOMPAREEXCHANGEACQUIRE */
-   return (oldval == ret) ? 1: 0;
-}
-
-
-static inline int opal_atomic_cmpset_rel_32( volatile int32_t *addr,
-                                             int32_t oldval, int32_t newval)
-{
-#if HAVE_INTERLOCKEDCOMPAREEXCHANGERELEASE
-   int32_t ret = InterlockedCompareExchangeRelease( (long volatile*)addr,
-                                                    (long)newval, (long)oldval );
-#else
-   int32_t ret = InterlockedCompareExchange( (long volatile*)addr,
-                                             (long)newval, (long)oldval );
-#endif  /* HAVE_INTERLOCKEDCOMPAREEXCHANGERELEASE */
-   return (oldval == ret) ? 1: 0;
-}
-
-static inline int opal_atomic_cmpset_32( volatile int32_t *addr,
-                                         int32_t oldval, int32_t newval)
-{
-   int32_t ret = InterlockedCompareExchange ((long volatile*) addr,
-                                             (long) newval, (long) oldval);
-
-   return (oldval == ret) ? 1: 0;
-}
-
-#define OPAL_HAVE_ATOMIC_MATH_32 1
-
-#define OPAL_HAVE_ATOMIC_ADD_32 1
-static inline int32_t opal_atomic_add_32(volatile int32_t *addr, int32_t delta)
-{
-   return InterlockedExchangeAdd ((LONG volatile *) addr,
-                                  (LONG) delta);
-}
-
-#define OPAL_HAVE_ATOMIC_SUB_32 1
-static inline int32_t opal_atomic_sub_32(volatile int32_t *addr, int32_t delta)
-{
-   return InterlockedExchangeAdd( (LONG volatile *) addr,
-                                  (LONG) (-delta));
-}
-
-#if HAVE_INTERLOCKEDCOMPAREEXCHANGE64
-#define OPAL_HAVE_ATOMIC_CMPSET_64 1
-static inline int opal_atomic_cmpset_acq_64( volatile int64_t *addr,
-                                             int64_t oldval, int64_t newval)
-{
-/* The address should be 64 bits aligned otherwise ...
- * http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dllproc/base/interlockedcompareexchange64.asp
- */
-#if HAVE_INTERLOCKEDCOMPAREEXCHANGEACQUIRE64
-	int64_t ret = InterlockedCompareExchangeAcquire64 ((int64_t volatile*) addr,
-                                                      (int64_t) newval, (int64_t) oldval);
-#else
-    int64_t ret = InterlockedCompareExchange64 ((int64_t volatile*) addr,
-                                                 (int64_t) newval, (int64_t) oldval);
-#endif  /* HAVE_INTERLOCKEDCOMPAREEXCHANGEACQUIRE64 */
-    return (oldval == ret) ? 1: 0;
-}
-
-static inline int opal_atomic_cmpset_rel_64( volatile int64_t *addr,
-                                             int64_t oldval, int64_t newval)
-{
-#if HAVE_INTERLOCKEDCOMPAREEXCHANGERELEASE64
-    int64_t ret = InterlockedCompareExchangeRelease64 ((int64_t volatile*) addr,
-                                                       (int64_t) newval, (int64_t) oldval);
-#else
-    int64_t ret = InterlockedCompareExchange64 ((int64_t volatile*) addr,
-                                                 (int64_t) newval, (int64_t) oldval);
-#endif  /* HAVE_INTERLOCKEDCOMPAREEXCHANGERELEASE64 */
-    return (oldval == ret) ? 1: 0;
-}
-
-
-static inline int opal_atomic_cmpset_64( volatile int64_t *addr,
-                                         int64_t oldval, int64_t newval)
-{
-    int64_t ret = InterlockedCompareExchange64 ((int64_t volatile*) addr,
-                                                 (int64_t) newval, (int64_t) oldval);
-    return (oldval == ret) ? 1: 0;
-}
-
-#define OPAL_HAVE_ATOMIC_MATH_64 1
-#define OPAL_HAVE_ATOMIC_ADD_64 1
-static inline int64_t opal_atomic_add_64(volatile int64_t *addr, int64_t delta)
-{
-    return InterlockedExchangeAdd64 ((int64_t volatile *) addr,
-                                     (int64_t) delta);
-}
-
-#define OPAL_HAVE_ATOMIC_SUB_64 1
-static inline int64_t opal_atomic_sub_64(volatile int64_t *addr, int64_t delta)
-{
-    return InterlockedExchangeAdd64 ((int64_t volatile *) addr,
-                                     (int64_t) (-delta));
-}
-
-#else
-
-#define OPAL_HAVE_ATOMIC_CMPSET_64 0
-#define OPAL_HAVE_ATOMIC_MATH_64 0
-#define OPAL_HAVE_ATOMIC_ADD_64 0
-#define OPAL_HAVE_ATOMIC_SUB_64 0
-
-#endif  /* HAVE_INTERLOCKEDCOMPAREEXCHANGE64 */
-
-#endif /* ! OMPI_SYS_ARCH_ATOMIC_H */

opal/include/opal/sys/win32/timer.h

@@ -1,29 +0,0 @@
-/*
- * Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
- *                         University Research and Technology
- *                         Corporation.  All rights reserved.
- * Copyright (c) 2004-2005 The University of Tennessee and The University
- *                         of Tennessee Research Foundation.  All rights
- *                         reserved.
- * Copyright (c) 2004-2005 High Performance Computing Center Stuttgart, 
- *                         University of Stuttgart.  All rights reserved.
- * Copyright (c) 2004-2005 The Regents of the University of California.
- *                         All rights reserved.
- * $COPYRIGHT$
- * 
- * Additional copyrights may follow
- * 
- * $HEADER$
- */
-
-#ifndef OMPI_SYS_ARCH_TIMER_H
-#define OMPI_SYS_ARCH_TIMER_H 1
-
-
-typedef LONGLONG opal_timer_t;
-
-opal_timer_t opal_sys_timer_get_cycles(void);
-
-#define OPAL_HAVE_SYS_TIMER_GET_CYCLES 1
-
-#endif /* ! OMPI_SYS_ARCH_TIMER_H */

opal/include/opal_config_bottom.h

@@ -52,7 +52,7 @@
 /*
  * Flex is trying to include the unistd.h file. As there is no configure
  * option or this, the flex generated files will try to include the file
- * even on platforms without unistd.h (such as Windows). Therefore, if we
+ * even on platforms without unistd.h. Therefore, if we
  * know this file is not available, we can prevent flex from including it.
  */
 #ifndef HAVE_UNISTD_H
@@ -220,45 +220,6 @@
 #    define __opal_attribute_weak_alias__(a)
 #endif
 
-/***********************************************************************
- *
- * Windows library interface declaration code
- *
- **********************************************************************/
-#if !defined(__WINDOWS__)
-#  if defined(_WIN32) || defined(WIN32) || defined(WIN64)
-#    define __WINDOWS__
-#  endif
-#endif  /* !defined(__WINDOWS__) */
-
-#if defined(__WINDOWS__)
-
-#  if defined(_USRDLL)    /* building shared libraries (.DLL) */
-#    if defined(OPAL_EXPORTS)
-#      define OPAL_DECLSPEC        __declspec(dllexport)
-#      define OPAL_MODULE_DECLSPEC
-#    else
-#      if defined(OPAL_IMPORTS)
-#        define OPAL_DECLSPEC      __declspec(dllimport)
-#      else
-#        define OPAL_DECLSPEC
-#      endif  /*defined(OPAL_IMPORTS)*/
-#      if defined(OPAL_MODULE_EXPORTS)
-#        define OPAL_MODULE_DECLSPEC __declspec(dllexport)
-#      else
-#        define OPAL_MODULE_DECLSPEC __declspec(dllimport)
-#      endif  /* defined(OPAL_MODULE_EXPORTS) */
-#    endif  /* defined(OPAL_EXPORTS) */
-#  else          /* building static library */
-#    if defined(OPAL_IMPORTS)
-#      define OPAL_DECLSPEC        __declspec(dllimport)
-#    else
-#      define OPAL_DECLSPEC
-#    endif  /* defined(OPAL_IMPORTS) */
-#    define OPAL_MODULE_DECLSPEC
-#  endif  /* defined(_USRDLL) */
-#  include "opal/win32/win_compat.h"
-#else
 #  if OPAL_C_HAVE_VISIBILITY
 #    define OPAL_DECLSPEC           __opal_attribute_visibility__("default")
 #    define OPAL_MODULE_DECLSPEC    __opal_attribute_visibility__("default")
@@ -266,7 +227,6 @@
 #    define OPAL_DECLSPEC
 #    define OPAL_MODULE_DECLSPEC
 #  endif
-#endif  /* defined(__WINDOWS__) */
 
 /*
  * Do we have <stdint.h>?
@@ -370,13 +330,8 @@ typedef unsigned char bool;
 /*
  * Set the compile-time path-separator on this system and variable separator
  */
-#ifdef __WINDOWS__
-#define OPAL_PATH_SEP "\\"
-#define OPAL_ENV_SEP  ';'
-#else
 #define OPAL_PATH_SEP "/"
 #define OPAL_ENV_SEP  ':'
-#endif
 
 
 /*
@@ -478,9 +433,9 @@ typedef unsigned char bool;
  * are no htonl and friends.  If that's the case, provide stubs.  I
  * would hope we never find a platform that doesn't have these macros
  * and would want to talk to the outside world... On other platforms
- * (like Windows) we fail to detect them correctly.
+ * we fail to detect them correctly.
  */
-#if !defined(__WINDOWS__) && !defined(HAVE_UNIX_BYTESWAP)
+#if !defined(HAVE_UNIX_BYTESWAP)
 static inline uint32_t htonl(uint32_t hostvar) { return hostvar; }
 static inline uint32_t ntohl(uint32_t netvar) { return netvar; }
 static inline uint16_t htons(uint16_t hostvar) { return hostvar; }
@@ -498,35 +453,13 @@ static inline uint16_t ntohs(uint16_t netvar) { return netvar; }
 #define __func__ __FILE__
 #endif
 
-/**
- * Because of the way we're using the opal_object inside Open MPI (i.e.
- * dynamic resolution at run-time to derive all objects from the basic
- * type), on Windows we have to build everything on C++ mode, simply
- * because the C mode does not support dynamic resolution in DLL. Therefore,
- * no automatic conversion is allowed. All types have to be explicitly casted
- * or the compiler generate an error. This is true even for the void* type. As
- * we use void* to silence others compilers in the resolution of the addr member
- * of the iovec structure, we have now to find a way around. The simplest solution
- * is to define a special type for this field (just for casting). It can be
- * set to void* on all platforms with the exception of windows where it has to be
- * char*.
- */
-#if defined(__WINDOWS__)
-#define IOVBASE_TYPE  char
-#else
 #define IOVBASE_TYPE  void
-#endif  /* defined(__WINDOWS__) */
 
 /**
  * If we generate our own bool type, we need a special way to cast the result
- * in such a way to keep the compilers silent. Right now, th only compiler who
+ * in such a way to keep the compilers silent.
- * complain about int to bool conversions is the Microsoft compiler.
  */
-#if defined(__WINDOWS__)
-#  define OPAL_INT_TO_BOOL(VALUE)  ((VALUE) != 0 ? true : false)
-#else
 #  define OPAL_INT_TO_BOOL(VALUE)  (bool)(VALUE)
-#endif  /* defined(__WINDOWS__) */
 
 /**
  * Top level define to check 2 things: a) if we want ipv6 support, and

opal/mca/base/mca_base_component_find.c

@@ -41,12 +41,8 @@
 #endif
 
 #if OPAL_WANT_LIBLTDL
-  #ifndef __WINDOWS__
+  #if OPAL_LIBLTDL_INTERNAL
-    #if OPAL_LIBLTDL_INTERNAL
+    #include "opal/libltdl/ltdl.h"
-      #include "opal/libltdl/ltdl.h"
-    #else
-      #include "ltdl.h"
-    #endif
   #else
     #include "ltdl.h"
   #endif
@@ -358,12 +354,6 @@ static void find_dyn_components(const char *path, const char *type_name,
         file->filename[OPAL_PATH_MAX] = '\0';
         file->status = UNVISITED;
 
-#if defined(__WINDOWS__) && defined(_DEBUG)
-        /* remove the debug suffix 'd', otherwise we will fail to 
-           load the module in later phase. */
-        file->name[strlen(file->name)-1] = '\0';
-#endif
-
         opal_list_append(&found_files, (opal_list_item_t *) 
                          file);
     }

opal/mca/base/mca_base_component_repository.c

@@ -27,12 +27,8 @@
 #include <stdio.h>
 
 #if OPAL_WANT_LIBLTDL
-  #ifndef __WINDOWS__
+  #if OPAL_LIBLTDL_INTERNAL
-    #if OPAL_LIBLTDL_INTERNAL
+    #include "opal/libltdl/ltdl.h"
-      #include "opal/libltdl/ltdl.h"
-    #else
-      #include "ltdl.h"
-    #endif
   #else
     #include "ltdl.h"
   #endif

opal/mca/base/mca_base_open.c

@@ -72,11 +72,7 @@ int mca_base_open(void)
     mca_base_system_default_path = strdup(opal_install_dirs.pkglibdir);
     asprintf(&mca_base_user_default_path, "%s"OPAL_PATH_SEP".openmpi"OPAL_PATH_SEP"components", opal_home_directory());
 #else
-# if defined(__WINDOWS__) && defined(_DEBUG)
-    asprintf(&mca_base_system_default_path, "%s/debug", opal_install_dirs.pkglibdir); 
-# else
     asprintf(&mca_base_system_default_path, "%s", opal_install_dirs.pkglibdir); 
-# endif
 #endif
 
     /* see if the user wants to override the defaults */
@@ -133,9 +129,7 @@ static void set_defaults(opal_output_stream_t *lds)
     /* Load up defaults */
 
     OBJ_CONSTRUCT(lds, opal_output_stream_t);
-#ifndef __WINDOWS__
     lds->lds_syslog_priority = LOG_INFO;
-#endif
     lds->lds_syslog_ident = "ompi";
     lds->lds_want_stderr = true;
 }
@@ -146,85 +140,83 @@ static void set_defaults(opal_output_stream_t *lds)
  */
 static void parse_verbose(char *e, opal_output_stream_t *lds)
 {
-  char *edup;
+    char *edup;
-  char *ptr, *next;
+    char *ptr, *next;
-  bool have_output = false;
+    bool have_output = false;
 
-  if (NULL == e) {
+    if (NULL == e) {
-    return;
+        return;
-  }
-
-  edup = strdup(e);
-  ptr = edup;
-
-  /* Now parse the environment variable */
-
-  while (NULL != ptr && strlen(ptr) > 0) {
-    next = strchr(ptr, ',');
-    if (NULL != next) {
-      *next = '\0';
     }
 
-    if (0 == strcasecmp(ptr, "syslog")) {
+    edup = strdup(e);
-#ifndef __WINDOWS__  /* there is no syslog */
+    ptr = edup;
-		lds->lds_want_syslog = true;
+
-      have_output = true;
+    /* Now parse the environment variable */
-    }
+
-    else if (strncasecmp(ptr, "syslogpri:", 10) == 0) {
+    while (NULL != ptr && strlen(ptr) > 0) {
-      lds->lds_want_syslog = true;
+        next = strchr(ptr, ',');
-      have_output = true;
+        if (NULL != next) {
-      if (strcasecmp(ptr + 10, "notice") == 0)
+            *next = '\0';
-	lds->lds_syslog_priority = LOG_NOTICE;
+        }
-      else if (strcasecmp(ptr + 10, "INFO") == 0)
+
-	lds->lds_syslog_priority = LOG_INFO;
+        if (0 == strcasecmp(ptr, "syslog")) {
-      else if (strcasecmp(ptr + 10, "DEBUG") == 0)
+            lds->lds_want_syslog = true;
-	lds->lds_syslog_priority = LOG_DEBUG;
+            have_output = true;
-    } else if (strncasecmp(ptr, "syslogid:", 9) == 0) {
+        }
-      lds->lds_want_syslog = true;
+        else if (strncasecmp(ptr, "syslogpri:", 10) == 0) {
-      lds->lds_syslog_ident = ptr + 9;
+            lds->lds_want_syslog = true;
-#endif
+            have_output = true;
+            if (strcasecmp(ptr + 10, "notice") == 0)
+                lds->lds_syslog_priority = LOG_NOTICE;
+            else if (strcasecmp(ptr + 10, "INFO") == 0)
+                lds->lds_syslog_priority = LOG_INFO;
+            else if (strcasecmp(ptr + 10, "DEBUG") == 0)
+                lds->lds_syslog_priority = LOG_DEBUG;
+        } else if (strncasecmp(ptr, "syslogid:", 9) == 0) {
+            lds->lds_want_syslog = true;
+            lds->lds_syslog_ident = ptr + 9;
+        }
+
+        else if (strcasecmp(ptr, "stdout") == 0) {
+            lds->lds_want_stdout = true;
+            have_output = true;
+        } else if (strcasecmp(ptr, "stderr") == 0) {
+            lds->lds_want_stderr = true;
+            have_output = true;
+        }
+
+        else if (strcasecmp(ptr, "file") == 0) {
+            lds->lds_want_file = true;
+            have_output = true;
+        } else if (strncasecmp(ptr, "file:", 5) == 0) {
+            lds->lds_want_file = true;
+            lds->lds_file_suffix = ptr + 5;
+            have_output = true;
+        } else if (strcasecmp(ptr, "fileappend") == 0) {
+            lds->lds_want_file = true;
+            lds->lds_want_file_append = 1;
+            have_output = true;
+        } 
+
+        else if (strncasecmp(ptr, "level", 5) == 0) {
+            lds->lds_verbose_level = 0;
+            if (ptr[5] == OPAL_ENV_SEP)
+                lds->lds_verbose_level = atoi(ptr + 6);
+        }
+
+        if (NULL == next) {
+            break;
+        }
+        ptr = next + 1;
     }
 
-    else if (strcasecmp(ptr, "stdout") == 0) {
+    /* If we didn't get an output, default to stderr */
-      lds->lds_want_stdout = true;
+
-      have_output = true;
+    if (!have_output) {
-    } else if (strcasecmp(ptr, "stderr") == 0) {
+        lds->lds_want_stderr = true;
-      lds->lds_want_stderr = true;
-      have_output = true;
     }
 
-    else if (strcasecmp(ptr, "file") == 0) {
+    /* All done */
-      lds->lds_want_file = true;
-      have_output = true;
-    } else if (strncasecmp(ptr, "file:", 5) == 0) {
-      lds->lds_want_file = true;
-      lds->lds_file_suffix = ptr + 5;
-      have_output = true;
-    } else if (strcasecmp(ptr, "fileappend") == 0) {
-      lds->lds_want_file = true;
-      lds->lds_want_file_append = 1;
-      have_output = true;
-    } 
 
-    else if (strncasecmp(ptr, "level", 5) == 0) {
+    free(edup);
-      lds->lds_verbose_level = 0;
-      if (ptr[5] == OPAL_ENV_SEP)
-        lds->lds_verbose_level = atoi(ptr + 6);
-    }
-
-    if (NULL == next) {
-      break;
-    }
-    ptr = next + 1;
-  }
-
-  /* If we didn't get an output, default to stderr */
-
-  if (!have_output) {
-    lds->lds_want_stderr = true;
-  }
-
-  /* All done */
-
-  free(edup);
 }

opal/mca/base/mca_base_param.c

@@ -10,7 +10,7 @@
  * Copyright (c) 2004-2005 The Regents of the University of California.
  *                         All rights reserved.
  * Copyright (c) 2008-2011 Cisco Systems, Inc.  All rights reserved.
- * Copyright (c) 2012      Los Alamos National Security, LLC. All rights
+ * Copyright (c) 2012-2013 Los Alamos National Security, LLC. All rights
  *                         reserved.
  * $COPYRIGHT$
  * 
@@ -95,9 +95,6 @@ static char * force_agg_path = NULL;
 /*
  * local functions
  */
-#if defined(__WINDOWS__)
-static int read_keys_from_registry(HKEY hKey, char *sub_key, char *current_name);
-#endif  /* defined(__WINDOWS__) */
 static int fixup_files(char **file_list, char * path, bool rel_path_search);
 static int read_files(char *file_list);
 static int param_register(const char *type_name,
@@ -270,11 +267,6 @@ int mca_base_param_recache_files(bool rel_path_search)
     }
     
     read_files(new_files);
-#if defined(__WINDOWS__)
-    read_keys_from_registry(HKEY_LOCAL_MACHINE, "SOFTWARE\\Open MPI", NULL);
-    read_keys_from_registry(HKEY_CURRENT_USER, "SOFTWARE\\Open MPI", NULL);
-#endif  /* defined(__WINDOWS__) */
-    
     free(files);
     free(new_files);
     if( NULL != new_agg_files ) {
@@ -996,131 +988,6 @@ static int read_files(char *file_list)
     return OPAL_SUCCESS;
 }
 
-/**
- *
- */
-#if defined(__WINDOWS__)
-#define MAX_KEY_LENGTH 255
-#define MAX_VALUE_NAME 16383
-
-static int read_keys_from_registry(HKEY hKey, char *sub_key, char *current_name)
-{       
-    TCHAR   achKey[MAX_KEY_LENGTH];        /* buffer for subkey name */
-    DWORD   cbName;                        /* size of name string */
-    TCHAR   achClass[MAX_PATH] = TEXT(""); /* buffer for class name */
-    DWORD   cchClassName = MAX_PATH;       /* size of class string */
-    DWORD   cSubKeys=0;                    /* number of subkeys */
-    DWORD   cbMaxSubKey;                   /* longest subkey size */
-    DWORD   cchMaxClass;                   /* longest class string */
-    DWORD   cValues;                       /* number of values for key */
-    DWORD   cchMaxValue;                   /* longest value name */
-    DWORD   cbMaxValueData;                /* longest value data */
-    DWORD   cbSecurityDescriptor;          /* size of security descriptor */
-
-    LPDWORD lpType;
-    LPDWORD word_lpData;
-    TCHAR   str_lpData[MAX_VALUE_NAME];
-    TCHAR   *str_key_name, *type_name, *next_name;
-    DWORD   dwSize, i, retCode, type_len, param_type;
-    TCHAR achValue[MAX_VALUE_NAME];
-    DWORD cchValue = MAX_VALUE_NAME;
-    HKEY hTestKey; 
-    char *sub_sub_key;
-    mca_base_param_storage_t storage, override, lookup;
-      
-    if( !RegOpenKeyEx( hKey, sub_key, 0, KEY_READ, &hTestKey) == ERROR_SUCCESS )
-        return OPAL_ERROR;
-
-    /* Get the class name and the value count. */
-    retCode = RegQueryInfoKey( hTestKey,                /* key handle */
-                               achClass,                /* buffer for class name */
-                               &cchClassName,           /* size of class string */
-                               NULL,                    /* reserved */
-                               &cSubKeys,               /* number of subkeys */
-                               &cbMaxSubKey,            /* longest subkey size */
-                               &cchMaxClass,            /* longest class string */
-                               &cValues,                /* number of values for this key */
-                               &cchMaxValue,            /* longest value name */
-                               &cbMaxValueData,         /* longest value data */
-                               &cbSecurityDescriptor,   /* security descriptor */
-                               NULL );
-
-    /* Enumerate the subkeys, until RegEnumKeyEx fails. */
-    for (i = 0; i < cSubKeys; i++) { 
-        cbName = MAX_KEY_LENGTH;
-        retCode = RegEnumKeyEx(hTestKey, i, achKey, &cbName, NULL, NULL, NULL, NULL); 
-        if (retCode != ERROR_SUCCESS) continue;
-        asprintf(&sub_sub_key, "%s\\%s", sub_key, achKey);
-        if( NULL != current_name ) {
-            asprintf(&next_name, "%s_%s", current_name, achKey);
-        } else {
-            asprintf(&next_name, "%s", achKey);
-        }
-        read_keys_from_registry(hKey, sub_sub_key, next_name);
-        free(next_name);
-        free(sub_sub_key);
-    }
-    
-    /* Enumerate the key values. */
-    for( i = 0; i < cValues; i++ ) { 
-        cchValue = MAX_VALUE_NAME; 
-        achValue[0] = '\0'; 
-        retCode = RegEnumValue(hTestKey, i, achValue, &cchValue, NULL, NULL, NULL, NULL);
-        if (retCode != ERROR_SUCCESS ) continue; 
-       
-        /* lpType - get the type of the value
-         * dwSize - get the size of the buffer to hold the value
-         */
-        retCode = RegQueryValueEx(hTestKey, achValue, NULL, (LPDWORD)&lpType, NULL, &dwSize);
-
-        if (strcmp(achValue,"")) {
-            if (current_name!=NULL)
-                asprintf(&type_name, "%s_%s", current_name, achValue);
-            else
-                asprintf(&type_name, "%s", achValue);
-        } else {
-            if (current_name!=NULL)
-                asprintf(&type_name, "%s", current_name);
-            else
-                asprintf(&type_name, "%s", achValue);
-        } 
-        
-        type_len = strcspn(type_name, "_");
-        str_key_name = type_name + type_len + 1;
-        if( type_len == strlen(type_name) )
-            str_key_name = NULL;
-        type_name[type_len] = '\0';
-
-        retCode = 1;
-        if( lpType == (LPDWORD)REG_SZ ) { /* REG_SZ = 1 */
-            retCode = RegQueryValueEx(hTestKey, achValue, NULL, NULL, (LPBYTE)&str_lpData, &dwSize);
-            storage.stringval = (char*)str_lpData;
-            override.stringval = (char*)str_lpData;
-            param_type = MCA_BASE_PARAM_TYPE_STRING;
-        } else if( lpType == (LPDWORD)REG_DWORD ) { /* REG_DWORD = 4 */
-            retCode = RegQueryValueEx(hTestKey, achValue, NULL, NULL, (LPBYTE)&word_lpData, &dwSize);
-            storage.intval  = (int)word_lpData;
-            override.intval = (int)word_lpData;
-            param_type = MCA_BASE_PARAM_TYPE_INT;
-        }
-        if( !retCode ) {
-            (void)param_register( type_name, NULL, str_key_name, NULL, 
-                                  param_type, false, false,
-                                  &storage, NULL, &override, &lookup );
-        } else {
-            opal_output( 0, "error reading value of param_name: %s with %d error.\n",
-                         str_key_name, retCode);
-        }
-        
-        free(type_name);
-    }
-
-    RegCloseKey( hKey );
-
-    return OPAL_SUCCESS;
-}
-#endif  /* defined(__WINDOWS__) */
-
 /******************************************************************************/
 
    

opal/mca/if/if.h

@@ -88,17 +88,10 @@ typedef struct opal_if_t {
     char                if_name[IF_NAMESIZE];
     int                 if_index;
     uint16_t            if_kernel_index;
-#ifndef __WINDOWS__
     int                 if_flags;
-#else
-    u_long              if_flags;
-#endif
     int                 if_speed;
     struct sockaddr_storage  if_addr;
    uint32_t             if_mask;
-#ifdef __WINDOWS__
-    struct sockaddr_in  if_bcast;
-#endif
     uint32_t            if_bandwidth;
 } opal_if_t;
 OPAL_DECLSPEC OBJ_CLASS_DECLARATION(opal_if_t);

opal/runtime/opal_cr.c

@@ -9,7 +9,7 @@
  *                         University of Stuttgart.  All rights reserved.
  * Copyright (c) 2004-2005 The Regents of the University of California.
  *                         All rights reserved.
- * Copyright (c) 2007      Los Alamos National Security, LLC.  All rights
+ * Copyright (c) 2007-2013 Los Alamos National Security, LLC.  All rights
  *                         reserved. 
  * Copyright (c) 2011      Oak Ridge National Labs.  All rights reserved.
  * Copyright (c) 2012 Cisco Systems, Inc.  All rights reserved.
@@ -310,7 +310,6 @@ int opal_cr_init(void )
                         (MPIR_debug_with_checkpoint ? "True": "False"));
 #endif
 
-#ifndef __WINDOWS__
     mca_base_param_reg_int_name("opal_cr", "signal",
                                 "Checkpoint/Restart signal used to initialize an OPAL Only checkpoint of a program",
                                 false, false,
@@ -348,10 +347,6 @@ int opal_cr_init(void )
     }
 #endif
 
-#else
-    opal_cr_is_tool = true;  /* no support for CR on Windows yet */ 
-#endif  /* __WINDOWS__ */
-
 #if OPAL_ENABLE_CRDEBUG == 1
     opal_cr_debug_num_free_threads = 3;
     opal_cr_debug_free_threads = (opal_thread_t **)malloc(sizeof(opal_thread_t *) * opal_cr_debug_num_free_threads );
@@ -1413,9 +1408,7 @@ void *MPIR_checkpoint_debugger_breakpoint(void)
 {
     /* spin until debugger attaches and releases us */
     while (MPIR_checkpoint_debug_gate == 0) {
-#if defined(__WINDOWS__)
+#if defined(HAVE_USLEEP)
-        Sleep(100);     /* milliseconds */
-#elif defined(HAVE_USLEEP)
         usleep(100000); /* microseconds */
 #else
         sleep(1);       /* seconds */

opal/runtime/opal_progress.c

@@ -9,7 +9,7 @@
  *                         University of Stuttgart.  All rights reserved.
  * Copyright (c) 2004-2005 The Regents of the University of California.
  *                         All rights reserved.
- * Copyright (c) 2006      Los Alamos National Security, LLC.  All rights
+ * Copyright (c) 2006-2013 Los Alamos National Security, LLC.  All rights
  *                         reserved. 
  *
  * $COPYRIGHT$
@@ -207,20 +207,16 @@ opal_progress(void)
         events += (callbacks[i])();
     }
 
-#if defined(__WINDOWS__) || defined(HAVE_SCHED_YIELD)
+#if defined(HAVE_SCHED_YIELD)
     if (call_yield && events <= 0) {
         /* If there is nothing to do - yield the processor - otherwise
          * we could consume the processor for the entire time slice. If
          * the processor is oversubscribed - this will result in a best-case
          * latency equivalent to the time-slice.
          */
-#if defined(__WINDOWS__)
-        SwitchToThread();
-#else
         sched_yield();
-#endif  /* defined(__WINDOWS__) */
     }
-#endif  /* defined(__WINDOWS__) || defined(HAVE_SCHED_YIELD) */
+#endif  /* defined(HAVE_SCHED_YIELD) */
 #if OPAL_ENABLE_MULTI_THREADS
     opal_atomic_add(&opal_progress_recursion_depth_counter, -1);
 #else

opal/threads/Makefile.am

@@ -24,7 +24,6 @@ headers += \
         threads/condition.h \
         threads/mutex.h \
         threads/mutex_unix.h \
-        threads/mutex_windows.h \
         threads/threads.h \
 	threads/tsd.h
 

opal/threads/mutex.c

@@ -9,7 +9,7 @@
  *                         University of Stuttgart.  All rights reserved.
  * Copyright (c) 2004-2005 The Regents of the University of California.
  *                         All rights reserved.
- * Copyright (c) 2007      Los Alamos National Security, LLC.  All rights
+ * Copyright (c) 2007-2013 Los Alamos National Security, LLC.  All rights
  *                         reserved. 
  * $COPYRIGHT$
  * 
@@ -30,24 +30,6 @@ bool opal_uses_threads = false;
 bool opal_mutex_check_locks = false;
 
 
-#ifdef __WINDOWS__
-
-static void opal_mutex_construct(opal_mutex_t *m)
-{
-    InterlockedExchange(&m->m_lock, 0);
-#if !OPAL_ENABLE_MULTI_THREADS && OPAL_ENABLE_DEBUG
-    m->m_lock_debug = 0;
-    m->m_lock_file = NULL;
-    m->m_lock_line = 0;
-#endif  /* !OPAL_ENABLE_MULTI_THREADS && OPAL_ENABLE_DEBUG */
-}
-
-static void opal_mutex_destruct(opal_mutex_t *m)
-{
-}
-
-#else
-
 static void opal_mutex_construct(opal_mutex_t *m)
 {
 #if OPAL_HAVE_POSIX_THREADS
@@ -97,8 +79,6 @@ static void opal_mutex_destruct(opal_mutex_t *m)
 #endif
 }
 
-#endif /* __WINDOWS__ */
-
 OBJ_CLASS_INSTANCE(opal_mutex_t,
                    opal_object_t,
                    opal_mutex_construct,

opal/threads/mutex.h

@@ -10,7 +10,7 @@
  * Copyright (c) 2004-2005 The Regents of the University of California.
  *                         All rights reserved.
  * Copyright (c) 2007      Cisco Systems, Inc.  All rights reserved.
- * Copyright (c) 2007      Los Alamos National Security, LLC.  All rights
+ * Copyright (c) 2007-2013 Los Alamos National Security, LLC.  All rights
  *                         reserved. 
  * Copyright (c) 2007      Voltaire. All rights reserved.
  * Copyright (c) 2010      Oracle and/or its affiliates.  All rights reserved.
@@ -110,11 +110,7 @@ static inline void opal_mutex_atomic_unlock(opal_mutex_t *mutex);
 
 END_C_DECLS
 
-#ifdef __WINDOWS__
-#include "mutex_windows.h"
-#else
 #include "mutex_unix.h"
-#endif
 
 BEGIN_C_DECLS
 

opal/threads/mutex_windows.h

@@ -1,95 +0,0 @@
-/*
- * Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
- *                         University Research and Technology
- *                         Corporation.  All rights reserved.
- * Copyright (c) 2004-2005 The University of Tennessee and The University
- *                         of Tennessee Research Foundation.  All rights
- *                         reserved.
- * Copyright (c) 2004-2005 High Performance Computing Center Stuttgart, 
- *                         University of Stuttgart.  All rights reserved.
- * Copyright (c) 2004-2005 The Regents of the University of California.
- *                         All rights reserved.
- * Copyright (c) 2007      Los Alamos National Security, LLC.  All rights
- *                         reserved. 
- * $COPYRIGHT$
- * 
- * Additional copyrights may follow
- * 
- * $HEADER$
- */
-
-#ifndef  OPAL_MUTEX_WINDOWS_H
-#define  OPAL_MUTEX_WINDOWS_H 1
-
-/**
- * @file:
- *
- * Mutual exclusion functions: Windows implementation.
- *
- * Functions for locking of critical sections.
- *
- * On Windows, base everything on InterlockedExchange().
- */
-
-#include "opal_config.h"
-#include "opal/class/opal_object.h"
-#include "opal/sys/atomic.h"
-
-BEGIN_C_DECLS
-
-struct opal_mutex_t {
-    opal_object_t super;
-    volatile LONG m_lock;
-
-#if OPAL_ENABLE_DEBUG
-    int m_lock_debug;
-    const char *m_lock_file;
-    int m_lock_line;
-#endif
-};
-
-OPAL_DECLSPEC OBJ_CLASS_DECLARATION(opal_mutex_t);
-
-
-static inline int opal_mutex_trylock(opal_mutex_t *m)
-{
-	return (0 == InterlockedExchange(&m->m_lock, 1) ? 1 : 0);
-}
-
-
-static inline void opal_mutex_lock(opal_mutex_t *m)
-{
-    while (InterlockedExchange(&m->m_lock, 1)) {
-        while (m->m_lock == 1) {
-            /* spin */;
-        }
-    }
-}
-
-
-static inline void opal_mutex_unlock(opal_mutex_t *m)
-{
-    InterlockedExchange(&m->m_lock, 0);
-}
-
-
-static inline int opal_mutex_atomic_trylock(opal_mutex_t *m)
-{
-    return opal_mutex_trylock(m);
-}
-
-
-static inline void opal_mutex_atomic_lock(opal_mutex_t *m)
-{
-   opal_mutex_lock(m);
-}
-
-
-static inline void opal_mutex_atomic_unlock(opal_mutex_t *m)
-{
-    opal_mutex_unlock(m);
-}
-
-END_C_DECLS
-
-#endif  /* OPAL_MUTEX_WINDOWS_H */

opal/threads/thread.c

@@ -37,87 +37,14 @@ OBJ_CLASS_INSTANCE(opal_thread_t,
 static void opal_thread_construct(opal_thread_t *t)
 {
     t->t_run = 0;
-#ifdef __WINDOWS__
+#ifdef OPAL_HAVE_POSIX_THREADS
-    t->t_handle = (HANDLE)NULL;
-#elif OPAL_HAVE_POSIX_THREADS
     t->t_handle = (pthread_t) -1;
 #elif OPAL_HAVE_SOLARIS_THREADS
     t->t_handle = (thread_t) -1;
 #endif
 }
 
-
+#ifdef OPAL_HAVE_POSIX_THREADS
-#ifdef __WINDOWS__
-
-/************************************************************************
- * Windows threads
- ************************************************************************/
-
-int opal_thread_start(opal_thread_t *t)
-{
-    DWORD tid;
-
-    if (OPAL_ENABLE_DEBUG) {
-        if (NULL == t->t_run || t->t_handle != (HANDLE) -1L) {
-            return OPAL_ERR_BAD_PARAM;
-        }
-    }
-
-    t->t_handle = CreateThread(NULL,    /* default security attributes */
-                               0,       /* default stack size */
-                               (LPTHREAD_START_ROUTINE) t->t_run,
-                               t,       /* argument */
-                               0,       /* default creation flags */
-                               &tid);
-
-    if (t->t_handle == NULL) {
-        return OPAL_ERROR;
-    }
-
-    return OPAL_SUCCESS;
-}
-
-
-int opal_thread_join(opal_thread_t *t, void **thr_return)
-{
-    DWORD rc;
-
-    if (WaitForSingleObject(t->t_handle, INFINITE) != WAIT_OBJECT_0) {
-        return OPAL_ERROR;
-    }
-    if (!GetExitCodeThread(t->t_handle, &rc)) {
-        return OPAL_ERROR;
-    }
-
-    if( NULL != thr_return ) {
-        *thr_return = (void *)((intptr_t)rc);
-    }
-
-    return OPAL_SUCCESS;
-}
-
-
-bool opal_thread_self_compare(opal_thread_t *t)
-{
-    HANDLE thread_handle;
-    thread_handle = GetCurrentThread();
-    return (thread_handle == t->t_handle ? true : false);
-}
-
-
-opal_thread_t *opal_thread_get_self(void)
-{
-    opal_thread_t *t = OBJ_NEW(opal_thread_t);
-    t->t_handle = GetCurrentThread();
-    return t;
-}
-
-
-void opal_thread_kill(opal_thread_t *t, int sig)
-{
-}
-
-#elif OPAL_HAVE_POSIX_THREADS
 
 /************************************************************************
  * POSIX threads

opal/threads/threads.h

@@ -47,9 +47,7 @@ struct opal_thread_t {
     opal_object_t super;
     opal_thread_fn_t t_run;
     void* t_arg;
-#ifdef __WINDOWS__
+#ifdef OPAL_HAVE_POSIX_THREADS
-    HANDLE t_handle;
-#elif OPAL_HAVE_POSIX_THREADS
     pthread_t t_handle;
 #elif OPAL_HAVE_SOLARIS_THREADS
     thread_t t_handle;

opal/threads/tsd.c

@@ -1,5 +1,5 @@
 /* 
- * Copyright (c) 2007      Los Alamos National Security, LLC.  All rights
+ * Copyright (c) 2007-2013 Los Alamos National Security, LLC.  All rights
  *                         reserved. 
  * $COPYRIGHT$
  * 
@@ -20,7 +20,7 @@
 
 #include "opal/threads/tsd.h"
 
-#if !OPAL_HAVE_POSIX_THREADS && !OPAL_HAVE_SOLARIS_THREADS && !defined(__WINDOWS__)
+#if !OPAL_HAVE_POSIX_THREADS && !OPAL_HAVE_SOLARIS_THREADS
 
 #define TSD_ENTRIES 32
 

opal/threads/tsd.h

@@ -1,5 +1,5 @@
 /* 
- * Copyright (c) 2007      Los Alamos National Security, LLC.  All rights
+ * Copyright (c) 2007-2013 Los Alamos National Security, LLC.  All rights
  *                         reserved. 
  * Copyright (c) 2008      Cisco Systems, Inc.  All rights reserved.
  * $COPYRIGHT$
@@ -195,46 +195,6 @@ opal_tsd_getspecific(opal_tsd_key_t key, void **valuep)
     return thr_getspecific(key, valuep);
 }
 
-#elif defined(__WINDOWS__)
-
-/* BWB - FIX ME - this is still not quite right -- we also need to
-   implement support for running the destructors when a thread exits,
-   but I'm not sure we have a framework for doing that just yet. */
-
-typedef DWORD opal_tsd_key_t;
-
-static inline int
-opal_tsd_key_create(opal_tsd_key_t *key,
-                    opal_tsd_destructor_t destructor)
-{
-    *key = TlsAlloc();
-
-    return (*key == TLS_OUT_OF_INDEXES) ? OPAL_ERROR : OPAL_SUCCESS;
-}
-
-static inline int
-opal_tsd_key_delete(opal_tsd_key_t key)
-{
-    key = TlsFree(key);
-
-    return (key == 0) ? OPAL_ERROR : OPAL_SUCCESS;
-}
-
-static inline int
-opal_tsd_setspecific(opal_tsd_key_t key, void *value)
-{
-    BOOL ret = TlsSetValue(key, (LPVOID) value);
-
-    return (ret) ? OPAL_SUCCESS : OPAL_ERROR;
-}
-
-static inline int
-opal_tsd_getspecific(opal_tsd_key_t key, void **valuep)
-{
-    *valuep = TlsGetValue(key);
-    return OPAL_SUCCESS;
-}
-
 #else
 
 typedef int opal_tsd_key_t;

opal/tools/CMakeLists.txt

@@ -1,16 +0,0 @@
-# Copyright (c) 2007-2008 High Performance Computing Center Stuttgart, 
-#                         University of Stuttgart.  All rights reserved.
-# Copyright (c) 2008      The University of Tennessee and The University
-#                         of Tennessee Research Foundation.  All rights
-#                         reserved.
-# $COPYRIGHT$
-# 
-# Additional copyrights may follow
-# 
-# $HEADER$
-#
-
-IF(OPAL_ENABLE_FT)
-  ADD_SUBDIRECTORY(opal-restart)
-ENDIF(OPAL_ENABLE_FT)
-ADD_SUBDIRECTORY(wrappers)

opal/tools/Makefile.am

@@ -17,8 +17,6 @@
 # $HEADER$
 #
 
-EXTRA_DIST += tools/CMakeLists.txt
-
 # This makefile.am does not stand on its own - it is included from
 # opal/Makefile.am
 

opal/tools/opal-checkpoint/CMakeLists.txt

@@ -1,27 +0,0 @@
-# Copyright (c) 2007-2010 High Performance Computing Center Stuttgart, 
-#                         University of Stuttgart.  All rights reserved.
-# $COPYRIGHT$
-# 
-# Additional copyrights may follow
-# 
-# $HEADER$
-#
-
-FILE(GLOB_RECURSE OPAL_CHECKPOINT_SOURCE_FILES "*.h" "*.c" "*.cc" "*.cpp")
-
-ADD_EXECUTABLE (opal-checkpoint ${OPAL_CHECKPOINT_SOURCE_FILES})
-
-ADD_DEPENDENCIES(opal-checkpoint libopen-pal)
-IF(BUILD_SHARED_LIBS)
-  SET_TARGET_PROPERTIES(opal-checkpoint PROPERTIES 
-    COMPILE_FLAGS "${OMPI_C_DEF_PRE}_USRDLL ${OMPI_C_DEF_PRE}OPAL_IMPORTS ${OMPI_C_DEF_PRE}OMPI_IMPORTS ${OMPI_C_DEF_PRE}ORTE_IMPORTS ${OMPI_CXX_LAN_FLAG}")
-ENDIF(BUILD_SHARED_LIBS)
-
-SET_TARGET_PROPERTIES(opal-checkpoint PROPERTIES
-  DEBUG_POSTFIX "${OMPI_EXE_DEBUG_POSTFIX}")
-
-TARGET_LINK_LIBRARIES (opal-checkpoint libopen-pal Ws2_32.lib shlwapi.lib)
-
-INSTALL(TARGETS opal-checkpoint
-  DESTINATION bin)
-INSTALL(FILES help-opal-checkpoint.txt DESTINATION share/openmpi)

opal/tools/opal-checkpoint/Makefile.am

@@ -22,7 +22,7 @@
 include $(top_srcdir)/Makefile.man-page-rules
 
 man_pages = opal-checkpoint.1
-EXTRA_DIST = $(man_pages:.1=.1in) CMakeLists.txt
+EXTRA_DIST = $(man_pages:.1=.1in)
 
 if WANT_FT_CR
 if OMPI_INSTALL_BINARIES

opal/tools/opal-restart/CMakeLists.txt

@@ -1,27 +0,0 @@
-# Copyright (c) 2007-2010 High Performance Computing Center Stuttgart, 
-#                         University of Stuttgart.  All rights reserved.
-# $COPYRIGHT$
-# 
-# Additional copyrights may follow
-# 
-# $HEADER$
-#
-
-FILE(GLOB_RECURSE OPAL_RESTART_SOURCE_FILES "*.h" "*.c" "*.cc" "*.cpp")
-
-ADD_EXECUTABLE (opal-restart ${OPAL_RESTART_SOURCE_FILES})
-
-ADD_DEPENDENCIES(opal-restart libopen-pal)
-IF(BUILD_SHARED_LIBS)
-  SET_TARGET_PROPERTIES(opal-restart PROPERTIES
-    COMPILE_FLAGS "${OMPI_C_DEF_PRE}_USRDLL ${OMPI_C_DEF_PRE}OPAL_IMPORTS ${OMPI_C_DEF_PRE}OMPI_IMPORTS ${OMPI_C_DEF_PRE}ORTE_IMPORTS ${OMPI_CXX_LAN_FLAG}")
-ENDIF(BUILD_SHARED_LIBS)
-
-SET_TARGET_PROPERTIES(opal-restart PROPERTIES
-  DEBUG_POSTFIX "${OMPI_EXE_DEBUG_POSTFIX}")
-
-TARGET_LINK_LIBRARIES (opal-restart libopen-pal Ws2_32.lib shlwapi.lib)
-
-INSTALL(TARGETS opal-restart
-  DESTINATION bin)
-INSTALL(FILES help-opal-restart.txt DESTINATION share/openmpi)

opal/tools/opal-restart/Makefile.am

@@ -22,7 +22,7 @@
 include $(top_srcdir)/Makefile.man-page-rules
 
 man_pages = opal-restart.1
-EXTRA_DIST = $(man_pages:.1=.1in) CMakeLists.txt
+EXTRA_DIST = $(man_pages:.1=.1in)
 
 if WANT_FT_CR
 if OMPI_INSTALL_BINARIES

opal/tools/wrappers/CMakeLists.txt

@@ -1,103 +0,0 @@
-# Copyright (c) 2007-2010 High Performance Computing Center Stuttgart, 
-#                         University of Stuttgart.  All rights reserved.
-# $COPYRIGHT$
-# 
-# Additional copyrights may follow
-# 
-# $HEADER$
-#
-
-FILE(GLOB_RECURSE OPAL_WRAPPER_SOURCE_FILES "*.h" "*.c" "*.cc" "*.cpp")
-
-ADD_EXECUTABLE (opal-wrapper ${OPAL_WRAPPER_SOURCE_FILES})
-
-ADD_DEPENDENCIES(opal-wrapper libopen-pal)
-IF(BUILD_SHARED_LIBS)
-  SET_TARGET_PROPERTIES(opal-wrapper PROPERTIES
-    COMPILE_FLAGS "${OMPI_C_DEF_PRE}_USRDLL ${OMPI_C_DEF_PRE}OPAL_IMPORTS ${OMPI_C_DEF_PRE}OMPI_IMPORTS ${OMPI_C_DEF_PRE}ORTE_IMPORTS ${OMPI_CXX_LAN_FLAG}")
-ENDIF(BUILD_SHARED_LIBS)
-
-SET_TARGET_PROPERTIES(opal-wrapper PROPERTIES
-  DEBUG_POSTFIX "${OMPI_EXE_DEBUG_POSTFIX}")
-
-  TARGET_LINK_LIBRARIES (opal-wrapper libopen-pal Ws2_32.lib shlwapi.lib)
-
-ADD_CUSTOM_COMMAND (TARGET opal-wrapper
-  POST_BUILD
-  COMMAND ${CMAKE_COMMAND} -E copy
-  ${OpenMPI_BINARY_DIR}/${CMAKE_CFG_INTDIR}/opal-wrapper${OMPI_EXE_DEBUG_POSTFIX}.exe
-  ${PROJECT_BINARY_DIR}/mpicc${OMPI_EXE_DEBUG_POSTFIX}.exe
-  COMMENT "Copying C compiler wrappers...")
-
-IF(OMPI_BUILD_CXX_BINDINGS)
-  ADD_CUSTOM_COMMAND (TARGET opal-wrapper
-    POST_BUILD
-    COMMAND ${CMAKE_COMMAND} -E copy
-    ${OpenMPI_BINARY_DIR}/${CMAKE_CFG_INTDIR}/opal-wrapper${OMPI_EXE_DEBUG_POSTFIXX}.exe
-    ${PROJECT_BINARY_DIR}/mpic++${OMPI_EXE_DEBUG_POSTFIX}.exe
-    COMMAND ${CMAKE_COMMAND} -E copy
-    ${OpenMPI_BINARY_DIR}/${CMAKE_CFG_INTDIR}/opal-wrapper${OMPI_EXE_DEBUG_POSTFIX}.exe
-    ${PROJECT_BINARY_DIR}/mpicxx${OMPI_EXE_DEBUG_POSTFIX}.exe
-    COMMENT "Copying C++ compiler wrappers...")
-
-  INSTALL(FILES ${PROJECT_BINARY_DIR}/mpic++${OMPI_EXE_DEBUG_POSTFIX}.exe
-    ${PROJECT_BINARY_DIR}/mpicxx${OMPI_EXE_DEBUG_POSTFIX}.exe
-    DESTINATION bin)
-ENDIF(OMPI_BUILD_CXX_BINDINGS)
-
-IF(OMPI_WANT_FORTRAN_BINDINGS)
-  ADD_CUSTOM_COMMAND(TARGET opal-wrapper
-  POST_BUILD
-  COMMAND ${CMAKE_COMMAND} -E copy
-  ${OpenMPI_BINARY_DIR}/${CMAKE_CFG_INTDIR}/opal-wrapper${OMPI_EXE_DEBUG_POSTFIX}.exe
-  ${PROJECT_BINARY_DIR}/mpifortran${OMPI_EXE_DEBUG_POSTFIX}.exe
-  COMMENT "Copying FORTRAN compiler wrappers...")
-
-  INSTALL(FILES ${PROJECT_BINARY_DIR}/mpifortran${OMPI_EXE_DEBUG_POSTFIX}.exe
-    DESTINATION bin)
-ENDIF(OMPI_WANT_FORTRAN_BINDINGS)
-
-ADD_CUSTOM_COMMAND (TARGET opal-wrapper
-  POST_BUILD
-  COMMAND ${CMAKE_COMMAND} -E copy
-  ${PROJECT_SOURCE_DIR}/tools/wrappers/help-opal-wrapper.txt
-  ${PROJECT_BINARY_DIR}/help-opal-wrapper${OMPI_EXE_DEBUG_POSTFIX}.exe.txt
-  COMMENT "Copying wrapper help files...")
-
-INSTALL(TARGETS opal-wrapper
-  DESTINATION bin)
-INSTALL(FILES help-opal-wrapper.txt
-  ${PROJECT_BINARY_DIR}/help-opal-wrapper${OMPI_EXE_DEBUG_POSTFIX}.exe.txt
-  DESTINATION share/openmpi)
-INSTALL(FILES ${PROJECT_BINARY_DIR}/mpicc${OMPI_EXE_DEBUG_POSTFIX}.exe
-  DESTINATION bin)
-
-IF(WANT_INSTALL_HEADERS)
-
-  ADD_CUSTOM_COMMAND (TARGET opal-wrapper
-    POST_BUILD
-    COMMAND ${CMAKE_COMMAND} -E copy
-    ${OpenMPI_BINARY_DIR}/${CMAKE_CFG_INTDIR}/opal-wrapper${OMPI_EXE_DEBUG_POSTFIX}.exe
-    ${PROJECT_BINARY_DIR}/opalcc${OMPI_EXE_DEBUG_POSTFIX}.exe
-    COMMENT "Copying renamed executables...")
-
-  IF(OMPI_BUILD_CXX_BINDINGS)
-    ADD_CUSTOM_COMMAND (TARGET opal-wrapper
-      POST_BUILD
-      COMMAND ${CMAKE_COMMAND} -E copy
-      ${OpenMPI_BINARY_DIR}/${CMAKE_CFG_INTDIR}/opal-wrapper${OMPI_EXE_DEBUG_POSTFIX}.exe
-      ${PROJECT_BINARY_DIR}/opalc++${OMPI_EXE_DEBUG_POSTFIX}.exe
-      COMMENT "Copying renamed executables...")
-
-    CONFIGURE_FILE(${OPAL_SOURCE_DIR}/tools/wrappers/opalc++-wrapper-data.txt.in
-                   ${OPAL_BINARY_DIR}/tools/wrappers/opalc++-wrapper-data.txt @ONLY)
-    INSTALL(FILES ${OPAL_BINARY_DIR}/tools/wrappers/opalc++-wrapper-data.txt
-            DESTINATION share/openmpi)
-  ENDIF(OMPI_BUILD_CXX_BINDINGS)
-
-  CONFIGURE_FILE(${OPAL_SOURCE_DIR}/tools/wrappers/opalcc-wrapper-data.txt.in
-                 ${OPAL_BINARY_DIR}/tools/wrappers/opalcc-wrapper-data.txt @ONLY)
-  INSTALL(FILES ${OPAL_BINARY_DIR}/tools/wrappers/opalcc-wrapper-data.txt
-          DESTINATION share/openmpi)
-
-ENDIF(WANT_INSTALL_HEADERS)

opal/tools/wrappers/Makefile.am

@@ -21,7 +21,7 @@
 DEFS="-DEXEEXT=\"$(EXEEXT)\""
 
 real_man_pages = generic_wrapper.1 opal_wrapper.1
-EXTRA_DIST = $(real_man_pages:.1=.1in) CMakeLists.txt
+EXTRA_DIST = $(real_man_pages:.1=.1in)
 
 include $(top_srcdir)/Makefile.man-page-rules
 

opal/tools/wrappers/opal_wrapper.c

@@ -10,7 +10,7 @@
  * Copyright (c) 2004-2005 The Regents of the University of California.
  *                         All rights reserved.
  * Copyright (c) 2007-2012 Cisco Systems, Inc.  All rights reserved.
- * Copyright (c) 2007      Los Alamos National Security, LLC.  All rights
+ * Copyright (c) 2007-2013 Los Alamos National Security, LLC.  All rights
  *                         reserved. 
  * Copyright (c) 2010      Oracle and/or its affiliates.  All rights reserved.
  * $COPYRIGHT$
@@ -56,13 +56,8 @@
 #include "opal/util/basename.h"
 #include "opal/util/os_path.h"
 
-#if defined(__WINDOWS__) && defined(_MSC_VER)
-#define OPAL_INCLUDE_FLAG  "/I"
-#define OPAL_LIBDIR_FLAG   "/LIBPATH:"
-#else
 #define OPAL_INCLUDE_FLAG  "-I"
 #define OPAL_LIBDIR_FLAG   "-L"
-#endif  /* !defined(__WINDOWS__) && defined(_MSC_VER) */
 
 struct options_data_t {
     char **compiler_args;
@@ -321,13 +316,8 @@ data_callback(const char *key, const char *value)
             if (0 != strcmp(options_data[parse_options_idx].path_includedir, "/usr/include") ||
                 0 == strncmp(options_data[parse_options_idx].language, "Fortran", strlen("Fortran"))) {
                 char *line;
-#if defined(__WINDOWS__)
-                asprintf(&line, OPAL_INCLUDE_FLAG"\"%s\"", 
-                         options_data[parse_options_idx].path_includedir);
-#else
                 asprintf(&line, OPAL_INCLUDE_FLAG"%s", 
                          options_data[parse_options_idx].path_includedir);
-#endif  /* defined(__WINDOWS__) */
                 opal_argv_append_nosize(&options_data[parse_options_idx].preproc_flags, line);
                 free(line);
             }
@@ -335,24 +325,10 @@ data_callback(const char *key, const char *value)
     } else if (0 == strcmp(key, "libdir")) {
         if (NULL != value) options_data[parse_options_idx].path_libdir = 
                                opal_install_dirs_expand(value);
-#if defined(__WINDOWS__) && defined(_MSC_VER)
-        opal_argv_append_nosize( &options_data[parse_options_idx].link_flags, "/link" );
-#endif  /* defined(__WINDOWS__) && defined(_MSC_VER) */
         if (0 != strcmp(options_data[parse_options_idx].path_libdir, "/usr/lib")) {
             char *line;
-#if defined(__WINDOWS__)
-#  if defined(_MSC_VER)
-            asprintf(&line, OPAL_LIBDIR_FLAG"\"%s\"", 
-                     options_data[parse_options_idx].path_libdir);
-#  else
-            /* linked DLLs are in bin for MinGW build*/
             asprintf(&line, OPAL_LIBDIR_FLAG"\"%s/../bin\"", 
                      options_data[parse_options_idx].path_libdir);
-#  endif /* defined(_MSC_VER) */
-#else
-            asprintf(&line, OPAL_LIBDIR_FLAG"%s", 
-                     options_data[parse_options_idx].path_libdir);
-#endif  /* defined(__WINDOWS__) */
             opal_argv_append_nosize(&options_data[parse_options_idx].link_flags, line);
             free(line);
         }

opal/util/basename.c

@@ -43,23 +43,13 @@ static inline char* opal_find_last_path_separator( const char* filename, size_t
 
     /* First skip the latest separators */
     for ( ; p >= filename; p-- ) {
-#if defined(__WINDOWS__)
-        if( (*p != '\\') && (*p != '/') )
-            break;
-#else
         if( *p != OPAL_PATH_SEP[0] )
             break;
-#endif  /* defined(__WINDOWS__) */
     }
 
     for ( ; p >= filename; p-- ) {
-#if defined(__WINDOWS__)
-        if( (*p == '\\') || (*p == '/') )
-            return p;
-#else
         if( *p == OPAL_PATH_SEP[0] )
             return p;
-#endif  /* defined(__WINDOWS__) */
     }
 
     return NULL;  /* nothing found inside the filename */
@@ -82,22 +72,6 @@ char *opal_basename(const char *filename)
         return strdup(filename);
     }
 
-    /* On Windows, automatically exclude the drive designator */
-
-#ifdef __WINDOWS__
-    if( isalpha(filename[0]) && (':' == filename[1]) ) {
-        if( strlen(filename) == 2 ) {
-            return strdup(filename);
-        } else if( strlen(filename) == 3 && (sep == filename[2]) ) {
-            return strdup(filename);
-        }
-        filename += 2;
-        if( sep == filename[0] ) {
-            ++filename;
-        }
-    }
-#endif
-
     /* Remove trailing sep's (note that we already know that strlen > 0) */
     tmp = strdup(filename);
     for (i = strlen(tmp) - 1; i > 0; --i) {

opal/util/daemon_init.c

@@ -35,12 +35,6 @@
 int opal_daemon_init(char *working_dir)
 {
 #if defined(HAVE_FORK)
-#ifndef __WINDOWS__
-    /* it seems that there is an entirely different way to write daemons in 
-       WINDOWS land. Firstly, they are called services and the way to 
-       go about it is to get a service handle annd then call CreateService()
-       So, I am guessing that this piece of code is called only by UNIX versions */
-
     pid_t pid;
     int fd;
 
@@ -85,10 +79,6 @@ int opal_daemon_init(char *working_dir)
     }
 
     return OPAL_SUCCESS;
-#else
-    printf ("This function has not been implemented in windows yet, file %s line %d\n", __FILE__, __LINE__);
-    abort();
-#endif
 
 #else /* HAVE_FORK */
     return OPAL_ERR_NOT_SUPPORTED;

opal/util/few.c

@@ -36,7 +36,6 @@
 
 int opal_few(char *argv[], int *status)
 {
-#ifndef __WINDOWS__
 #if defined(HAVE_FORK) && defined(HAVE_EXECVE) && defined(HAVE_WAITPID)
     pid_t pid, ret;
 
@@ -81,47 +80,4 @@ int opal_few(char *argv[], int *status)
 #else
     return OPAL_ERR_NOT_SUPPORTED;
 #endif
-
-#else
-
-    STARTUPINFO si;
-    PROCESS_INFORMATION pi;
-    DWORD process_stat;
-    char* command  = argv[0];
-    char* exec_command;
-
-    ZeroMemory (&si, sizeof(si));
-    ZeroMemory (&pi, sizeof(pi));
-
-    _flushall();  /* Push all output */
-
-    GetStartupInfo (&si);
-    argv[0] = opal_basename( command );
-    exec_command = opal_argv_join( argv, ' ' );
-    free( argv[0] );
-    argv[0] = command;
-    if (!CreateProcess (argv[0],
-                        (LPSTR)exec_command,
-                        NULL,
-                        NULL,
-                        TRUE,
-                        0,
-                        NULL,
-                        NULL,
-                        &si,
-                        &pi)){
-        *status = (int)GetLastError();
-        return OPAL_ERROR;
-    }
-
-    /* wait for child to die */
-    WaitForSingleObject(pi.hProcess, INFINITE);
-    if( 0 == GetExitCodeProcess(pi.hProcess, &process_stat) ) {
-        *status = (int)GetLastError();
-        return OPAL_ERROR;
-    }
-    *status = (int)process_stat;
-
-    return OPAL_SUCCESS;
-#endif
 }

opal/util/if.c

@@ -194,11 +194,7 @@ int opal_ifaddrtoname(const char* if_addr, char* if_name, int length)
     int error;
     struct addrinfo hints, *res = NULL, *r;
 #else
-#ifndef __WINDOWS__
     in_addr_t inaddr;
-#else 
-    unsigned long inaddr;
-#endif
     struct hostent *h;
 #endif
 
@@ -397,8 +393,6 @@ int opal_ifindextomask(int if_index, uint32_t* if_mask, int length)
 /* 
  *  Lookup the interface by opal_list index and return the 
  *  flags assigned to the interface.
- *
- *  Bug: Make return type portable (compatible with Windows)
  */
 
 int opal_ifindextoflags(int if_index, uint32_t* if_flags)

opal/util/lt_interface.c

@@ -16,12 +16,8 @@
 #include "opal/util/output.h"
 
 #if OPAL_WANT_LIBLTDL
-  #ifndef __WINDOWS__
+  #if OPAL_LIBLTDL_INTERNAL
-    #if OPAL_LIBLTDL_INTERNAL
+    #include "opal/libltdl/ltdl.h"
-      #include "opal/libltdl/ltdl.h"
-    #else
-      #include "ltdl.h"
-    #endif
   #else
     #include "ltdl.h"
   #endif

opal/util/opal_environ.c

@@ -10,7 +10,7 @@
  * Copyright (c) 2004-2005 The Regents of the University of California.
  *                         All rights reserved.
  * Copyright (c) 2006      Cisco Systems, Inc.  All rights reserved.
- * Copyright (c) 2007      Los Alamos National Security, LLC.  All rights
+ * Copyright (c) 2007-2013 Los Alamos National Security, LLC.  All rights
  *                         reserved. 
  * $COPYRIGHT$
  * 
@@ -30,11 +30,7 @@
 #include "opal/util/opal_environ.h"
 #include "opal/constants.h"
 
-#ifdef __WINDOWS__ 
-#define OPAL_DEFAULT_TMPDIR "C:\\TEMP" 
-#else 
 #define OPAL_DEFAULT_TMPDIR "/tmp" 
-#endif
 
 /*
  * Merge two environ-like char arrays, ensuring that there are no
@@ -206,11 +202,9 @@ int opal_unsetenv(const char *name, char ***env)
     for (i = 0; (*env)[i] != NULL; ++i) {
         if (0 != strncmp((*env)[i], compare, len))
             continue;
-#if !defined(__WINDOWS__)
         if (environ != *env) {
             free((*env)[i]);
         }
-#endif
         for (; (*env)[i] != NULL; ++i)
             (*env)[i] = (*env)[i + 1];
         found = true;
@@ -238,11 +232,6 @@ const char* opal_home_directory( void )
 {
     char* home = getenv("HOME");
 
-#if defined(__WINDOWS__)
-    if( NULL == home )
-        home = getenv("USERPROFILE");
-#endif  /* defined(__WINDOWS__) */
-
     return home;
 }
 

opal/util/opal_environ.h

@@ -9,7 +9,7 @@
  *                         University of Stuttgart.  All rights reserved.
  * Copyright (c) 2004-2005 The Regents of the University of California.
  *                         All rights reserved.
- * Copyright (c)      2007 Los Alamos National Security, LLC.  All rights
+ * Copyright (c) 2007-2013 Los Alamos National Security, LLC.  All rights
  *                         reserved. 
  * $COPYRIGHT$
  * 
@@ -133,16 +133,12 @@ OPAL_DECLSPEC const char* opal_tmp_directory( void );
 
 /* Some care is needed with environ on OS X when dealing with shared
    libraries.  Handle that care here... */
-#if !defined(__WINDOWS__)
-
 #ifdef HAVE__NSGETENVIRON
 #define environ (*_NSGetEnviron())
 #else
 OPAL_DECLSPEC extern char **environ;
 #endif
 
-#endif  /* !defined(__WINDOWS__) */
-
 END_C_DECLS
 
 #endif /* OPAL_ENVIRON */

opal/util/opal_pty.c

@@ -108,17 +108,6 @@ int opal_openpty(int *amaster, int *aslave, char *name,
     return -1;
 }
 
-#elif defined(__WINDOWS__)
-
-/* yeah, let's assume for the moment that ptys don't work on windows */
-
-int opal_openpty(int *amaster, int *aslave, char *name, 
-                 struct termios *termp, struct winsize *winp)
-{
-    return -1;
-}
-
-
 #elif defined(HAVE_OPENPTY)
 
 int opal_openpty(int *amaster, int *aslave, char *name, 

opal/util/os_dirpath.c

@@ -84,44 +84,9 @@ int opal_os_dirpath_create(const char *path, const mode_t mode)
        building up a directory name.  Check to see if that dirname
        exists.  If it doesn't, create it. */
 
-    /* Notes about stat(): Windows has funny definitions of what will
-       return 0 from stat().  "C:" will return failure, while "C:\"
-       will return success.  Similarly, "C:\foo" will return success,
-       while "C:\foo\" will return failure (assuming that a folder
-       named "foo" exists under C:\).
-
-       POSIX implementations of stat() are generally a bit more
-       forgiving; most will return true for "/foo" and "/foo/"
-       (assuming /foo exists).  But we might as well abide by the same
-       rules as Windows and generally disallow checking for names
-       ending with path_sep (the only possible allowable one is
-       checking for "/", which is the root directory, and is
-       guaranteed to exist on valid POSIX filesystems, and is
-       therefore not worth checking for). */
-
     len = opal_argv_count(parts);
     for (i = 0; i < len; ++i) {
         if (i == 0) {
-
-#ifdef __WINDOWS__
-            /* In the Windows case, check for "<drive>:" case (i.e.,
-               an absolute pathname).  If this is the case, ensure
-               that it ends in a path_sep. */
-
-            if (2 == strlen(parts[0]) && isalpha(parts[0][0]) &&
-                ':' == parts[0][1]) {
-                strcat(tmp, parts[i]);
-                strcat(tmp, path_sep);
-            }
-            
-            /* Otherwise, it's a relative path.  Per the comment
-               above, we don't want a '\' at the end, so just append
-               this part. */
-
-            else {
-                strcat(tmp, parts[i]);
-            }
-#else
             /* If in POSIX-land, ensure that we never end a directory
                name with path_sep */
 
@@ -129,7 +94,6 @@ int opal_os_dirpath_create(const char *path, const mode_t mode)
                 strcat(tmp, path_sep);
             }
             strcat(tmp, parts[i]);
-#endif
         }
 
         /* If it's not the first part, ensure that there's a
@@ -178,6 +142,12 @@ int opal_os_dirpath_destroy(const char *path,
 {
     int rc, exit_status = OPAL_SUCCESS;
     bool is_dir = false;
+    DIR *dp;
+    struct dirent *ep;
+    char *filenm;
+#ifndef HAVE_STRUCT_DIRENT_D_TYPE 
+    struct stat buf;
+#endif
 
     if (NULL == path) {  /* protect against error */
         return OPAL_ERROR;
@@ -191,164 +161,85 @@ int opal_os_dirpath_destroy(const char *path,
         goto cleanup;
     }
 
-#ifndef __WINDOWS__
+    /* Open up the directory */
-    {
+    dp = opendir(path);
-        DIR *dp;
+    if (NULL == dp) {
-        struct dirent *ep;
+        return OPAL_ERROR;
-        char *filenm;
+    }
-#ifndef HAVE_STRUCT_DIRENT_D_TYPE 
-        struct stat buf;
-#endif
 
-        /* Open up the directory */
+    while (NULL != (ep = readdir(dp)) ) {
-        dp = opendir(path);
+        /* skip:
-        if (NULL == dp) {
+         *  - . and ..
-            return OPAL_ERROR;
+         */
+        if ((0 == strcmp(ep->d_name, ".")) ||
+            (0 == strcmp(ep->d_name, "..")) ) {
+            continue;
         }
-
-        while (NULL != (ep = readdir(dp)) ) {
-            /* skip:
-            *  - . and ..
-            */
-            if ((0 == strcmp(ep->d_name, ".")) ||
-                (0 == strcmp(ep->d_name, "..")) ) {
-                    continue;
-            }
         
-            /* Check to see if it is a directory */
+        /* Check to see if it is a directory */
-            is_dir = false;
+        is_dir = false;
 
-            /* Create a pathname.  This is not always needed, but it makes
+        /* Create a pathname.  This is not always needed, but it makes
-             * for cleaner code just to create it here.  Note that we are
+         * for cleaner code just to create it here.  Note that we are
-             * allocating memory here, so we need to free it later on. 
+         * allocating memory here, so we need to free it later on. 
-             */
+         */
-            filenm = opal_os_path(false, path, ep->d_name, NULL);
+        filenm = opal_os_path(false, path, ep->d_name, NULL);
 #ifdef HAVE_STRUCT_DIRENT_D_TYPE
-            if (DT_DIR == ep->d_type) {
+        if (DT_DIR == ep->d_type) {
-                is_dir = true;
+            is_dir = true;
-            }
+        }
 #else /* have dirent.d_type */
-            rc = stat(filenm, &buf);
+        rc = stat(filenm, &buf);
-            if (rc < 0 || S_ISDIR(buf.st_mode)) {
+        if (rc < 0 || S_ISDIR(buf.st_mode)) {
-                is_dir = true;
+            is_dir = true;
-            }
+        }
 #endif /* have dirent.d_type */        
 
+        /*
+         * If not recursively decending, then if we find a directory then fail
+         * since we were not told to remove it.
+         */
+        if( is_dir && !recursive) {
+            /* Set the error indicating that we found a directory,
+             * but continue removing files
+             */
+            exit_status = OPAL_ERROR;
+            free(filenm);
+            continue;
+        }
+
+        /* Will the caller allow us to remove this file/directory? */
+        if(NULL != cbfunc) {
             /*
-              * If not recursively decending, then if we find a directory then fail
+             * Caller does not wish to remove this file/directory,
-              * since we were not told to remove it.
+             * continue with the rest of the entries
-              */
+             */
-            if( is_dir && !recursive) {
+            if( ! (cbfunc(path, ep->d_name)) ) {
-                /* Set the error indicating that we found a directory,
-                 * but continue removing files
-                 */
-                exit_status = OPAL_ERROR;
                 free(filenm);
                 continue;
             }
-
-            /* Will the caller allow us to remove this file/directory? */
-            if(NULL != cbfunc) {
-                /*
-                 * Caller does not wish to remove this file/directory,
-                 * continue with the rest of the entries
-                 */
-                if( ! (cbfunc(path, ep->d_name)) ) {
-                    free(filenm);
-                    continue;
-                }
-            }
-            /* Directories are recursively destroyed */
-            if(is_dir) {
-                rc = opal_os_dirpath_destroy(filenm, recursive, cbfunc);
-                free(filenm);
-                if (OPAL_SUCCESS != rc) {
-                    exit_status = rc;
-                    closedir(dp);
-                    goto cleanup;
-                }
-            }
-            /* Files are removed right here */
-            else {
-                if( 0 != (rc = unlink(filenm) ) ) {
-                    exit_status = OPAL_ERROR;
-                }
-                free(filenm);
-            }
         }
-    
+        /* Directories are recursively destroyed */
-        /* Done with this directory */
+        if(is_dir) {
-        closedir(dp);
+            rc = opal_os_dirpath_destroy(filenm, recursive, cbfunc);
-    }
+            free(filenm);
-#else
+            if (OPAL_SUCCESS != rc) {
-    {
+                exit_status = rc;
-        char search_path[MAX_PATH];
+                closedir(dp);
-        HANDLE file;
+                goto cleanup;
-        WIN32_FIND_DATA file_data;
-        TCHAR *file_name;
-    
-        strncpy(search_path, path, strlen(path)+1);
-        strncat (search_path, OPAL_PATH_SEP"*", 3);
-        file = FindFirstFile(search_path, &file_data);
-    
-        if (INVALID_HANDLE_VALUE == file) {
-            FindClose(file);
-            return OPAL_ERROR;
-        } 
-    
-        do {
-            /* Skip . and .. */
-            if ((0 == strcmp(file_data.cFileName, ".")) ||
-                (0 == strcmp(file_data.cFileName, "..")) ) {
-                    continue;
             }
-        
+        }
-            is_dir = false;
+        /* Files are removed right here */
-            if(file_data.dwFileAttributes & FILE_ATTRIBUTE_DIRECTORY) {
+        else {
-                is_dir = true;
+            if( 0 != (rc = unlink(filenm) ) ) {
-            } 
-            /*
-             * If not recursively decending, then if we find a directory then fail
-             * since we were not told to remove it.
-             */
-            if( is_dir && !recursive) {
-                /* Set the error indicating that we found a directory,
-                 * but continue removing files
-                 */
                 exit_status = OPAL_ERROR;
-                continue;
             }
-        
+            free(filenm);
-            /* Will the caller allow us to remove this file/directory */
+        }
-            if( NULL != cbfunc) {
-                /*
-                 * Caller does not wish to remove this file/directory,
-                 * continue with the rest of the entries
-                 */
-                if( !cbfunc(path, file_data.cFileName) ) {
-                    continue;
-                }
-            }
-
-            file_name = opal_os_path(false, path, file_data.cFileName, NULL);
-            if( is_dir ) {
-                if( OPAL_SUCCESS != (rc = opal_os_dirpath_destroy(file_name,
-                                                                  recursive,
-                                                                  cbfunc) ) ) {
-                    exit_status = rc;
-                    free(file_name);
-                    FindClose(file);
-                    goto cleanup;
-                }
-            } else {
-                DeleteFile(file_name);
-            }
-            free(file_name);
-        } while( 0 != FindNextFile(file, &file_data) );
-    
-        FindClose(file);
     }
-#endif
+    
+    /* Done with this directory */
+    closedir(dp);
     
  cleanup:
     
@@ -363,7 +254,6 @@ int opal_os_dirpath_destroy(const char *path,
 }
 
 bool opal_os_dirpath_is_empty(const char *path ) {
-#ifndef __WINDOWS__
     DIR *dp;
     struct dirent *ep;
     
@@ -384,44 +274,10 @@ bool opal_os_dirpath_is_empty(const char *path ) {
     }
 
     return true;
-#else 
-    char search_path[MAX_PATH];
-    HANDLE file;
-    WIN32_FIND_DATA file_data;
-    bool found = false;
-
-    if (NULL != path) {
-        strncpy(search_path, path, strlen(path)+1);
-        strncat (search_path, "\\*", 3);
-
-        file = FindFirstFile(search_path, &file_data);
-        if (INVALID_HANDLE_VALUE == file) {
-            goto cleanup;
-        }
-
-        do {
-            if (0 != strcmp(file_data.cFileName, ".") || 0 != strcmp(file_data.cFileName, "..")) {
-                found = true;
-                goto cleanup;
-            }
-        } while (0 != FindNextFile(file, &file_data));
-    }
-  cleanup:
-    FindClose(file);
-    return found;
-#endif /* ifndef __WINDOWS__ */
 }
 
 int opal_os_dirpath_access(const char *path, const mode_t in_mode ) {
-#ifndef __WINDOWS__
     struct stat buf;
-#else
-#  ifndef _MSC_VER
-    struct stat buf;
-#  else
-    struct __stat64 buf;
-#  endif
-#endif
     mode_t loc_mode = S_IRWXU;  /* looking for full rights */
 
     /*
@@ -431,11 +287,7 @@ int opal_os_dirpath_access(const char *path, const mode_t in_mode ) {
         loc_mode = in_mode;
     }
 
-#ifndef __WINDOWS__
     if (0 == stat(path, &buf)) { /* exists - check access */
-#else
-    if (0 == _stat64(path, &buf)) { /* exist -- check */
-#endif
         if ((buf.st_mode & loc_mode) == loc_mode) { /* okay, I can work here */
             return(OPAL_SUCCESS);
         }

opal/util/os_path.c

@@ -59,9 +59,7 @@ char *opal_os_path(bool relative, ...)
     	    strcpy(path, ".");
             strcat(path, path_sep);
     	} else {
-#ifndef __WINDOWS__
     	    strcpy(path, path_sep);
-#endif
     	}
     	return(path);
     }
@@ -88,13 +86,9 @@ char *opal_os_path(bool relative, ...)
     }
 
     va_start(ap, relative);
-    /* Windows does not require to have the initial separator. */
     if( NULL != (element = va_arg(ap, char*)) ) {
     	if (path_sep[0] != element[0]) {
-#ifdef __WINDOWS__
+            strcat(path, path_sep);
-            if( relative )
-#endif  /* __WINDOWS__ */
-                strcat(path, path_sep);
         }
         strcat(path, element);
     }

opal/util/os_path.h

@@ -67,35 +67,9 @@ OPAL_DECLSPEC char *opal_os_path(bool relative, ...) __opal_attribute_malloc__ _
 
 /**
  * Convert the path to be OS friendly. On UNIX this function will
- * be empty, when on Windows it will convert all '/' to '\\' and
+ * be empty.
- * eventually remove the '/cygdrive/' from the beginning of the
- * path (if the configure was runned under Cygwin).
  */
-#if defined(__WINDOWS__)
-static inline char* opal_make_filename_os_friendly( char* filename )
-{
-    char* p = filename;
-    size_t length;
-    
-    if( NULL == filename )
-        return NULL;
-    
-    length = strlen(filename);
-    if( strncmp( filename, "/cygdrive/", 10 ) == 0 ) {
-        memmove( filename + 1, filename + 10, length - 10 );
-        filename[0] = filename[1];
-        filename[1] = ':';
-        filename[length - 10 + 1] = '\0';
-    }
-    for( ; *p != '\0'; p++ ) {
-        if( *p == '/' )
-            *p = '\\';
-    }
-    return filename;
-}
-#else
 #define opal_make_filename_os_friendly(PATH)   (PATH)
-#endif  /* defined(__WINDOWS__) */
 
 END_C_DECLS
 

opal/util/output.c

@@ -60,11 +60,7 @@ typedef struct {
     bool ldi_syslog;
     int ldi_syslog_priority;
 
-#ifndef __WINDOWS__
     char *ldi_syslog_ident;
-#else
-    HANDLE ldi_syslog_ident;
-#endif
     char *ldi_prefix;
     int ldi_prefix_len;
 
@@ -94,7 +90,7 @@ static int output(int output_id, const char *format, va_list arglist);
 
 
 #define OPAL_OUTPUT_MAX_STREAMS 64
-#if defined(__WINDOWS__) || defined(HAVE_SYSLOG)
+#if defined(HAVE_SYSLOG)
 #define USE_SYSLOG 1
 #else
 #define USE_SYSLOG 0
@@ -164,12 +160,6 @@ bool opal_output_init(void)
     }
 
     OBJ_CONSTRUCT(&verbose, opal_output_stream_t);
-#if defined(__WINDOWS__)
-    {
-        WSADATA wsaData;
-        WSAStartup( MAKEWORD(2,2), &wsaData );
-    }
-#endif  /* defined(__WINDOWS__) */
     if (opal_output_redirected_to_syslog) {
         verbose.lds_want_syslog = true;
         verbose.lds_syslog_priority = opal_output_redirected_syslog_pri;
@@ -350,10 +340,6 @@ void opal_output_close(int output_id)
         if (i >= OPAL_OUTPUT_MAX_STREAMS && syslog_opened) {
             closelog();
         }
-#elif defined(__WINDOWS__)
-        if(info[output_id].ldi_syslog_ident != NULL) {
-            DeregisterEventSource(info[output_id].ldi_syslog_ident);
-        }
 #endif
     }
 
@@ -508,9 +494,6 @@ void opal_output_finalize(void)
         OBJ_DESTRUCT(&verbose);
         OBJ_DESTRUCT(&mutex);
     }
-#if defined(__WINDOWS__)
-    WSACleanup();
-#endif  /* defined(__WINDOWS__) */
 }
 
 /************************************************************************/
@@ -626,12 +609,6 @@ static int do_open(int output_id, opal_output_stream_t * lds)
                 info[i].ldi_syslog_ident = NULL;
                 openlog("opal", LOG_PID, LOG_USER);
             }
-#elif defined(__WINDOWS__)
-            if (NULL == (info[i].ldi_syslog_ident =
-                         RegisterEventSource(NULL, TEXT("opal: ")))) {
-                /* handle the error */
-                return OPAL_ERROR;
-            }
 #endif
             syslog_opened = true;
             info[i].ldi_syslog_priority = lds->lds_syslog_priority;
@@ -777,13 +754,9 @@ static int open_file(int i)
 
         /* Make the file be close-on-exec to prevent child inheritance
          * problems */
-
-#ifndef __WINDOWS__
-        /* TODO: Need to find out the equivalent in windows */
         if (-1 == fcntl(info[i].ldi_fd, F_SETFD, 1)) {
            return OPAL_ERR_IN_ERRNO;
         }
-#endif
 
     }
 
@@ -827,12 +800,10 @@ static void free_descriptor(int output_id)
 	}
 	ldi->ldi_file_suffix = NULL;
 
-#ifndef __WINDOWS__
 	if (NULL != ldi->ldi_syslog_ident) {
 	    free(ldi->ldi_syslog_ident);
 	}
 	ldi->ldi_syslog_ident = NULL;
-#endif
     }
 }
 

opal/util/path.c

@@ -11,7 +11,7 @@
  *                         All rights reserved.
  * Copyright (c) 2009-2012 Cisco Systems, Inc.  All rights reserved.
  * Copyright (c) 2010      IBM Corporation.  All rights reserved.
- * Copyright (c) 2012      Los Alamos National Security, LLC.
+ * Copyright (c) 2012-2013 Los Alamos National Security, LLC.
  *                         All rights reserved.
  * $COPYRIGHT$
  * 
@@ -60,15 +60,9 @@ static char *list_env_get(char *var, char **list);
 
 bool opal_path_is_absolute( const char *path )
 {
-#if defined(__WINDOWS__)
-    /* On Windows an absolute path always start with [a-z]:\ or with \\ */
-    if( (isalpha(path[0]) && (':' == path[1])) ||
-        ('\\' == path[0]) && ('\\' == path[1]) ) return true;
-#else
     if( OPAL_PATH_SEP[0] == *path ) {
         return true;
     }
-#endif  /* defined(__WINDOWS__) */
     return false;
 }
 
@@ -367,13 +361,7 @@ char* opal_find_absolute_path( char* app_name )
     
     if( NULL != abs_app_name ) {
         char* resolved_path = (char*)malloc(OPAL_PATH_MAX);
-#if !defined(__WINDOWS__)
         realpath( abs_app_name, resolved_path );
-#else
-#ifdef HAVE_SHLWAPI_H
-		PathCanonicalize(resolved_path, abs_app_name);
-#endif
-#endif  /* !defined(__WINDOWS__) */
         if( abs_app_name != app_name ) free(abs_app_name);
         return resolved_path;
     }
@@ -419,10 +407,6 @@ char* opal_find_absolute_path( char* app_name )
  *   statfs(const char *path, struct statfs *buf);
  *          with f_fstypename, contains a string of length MFSTYPENAMELEN
  *          return 0 success, -1 on failure with errno set.
- * Windows (interix):
- *      statvfs(const char *path, struct statvfs *buf);
- *          with unsigned long f_fsid
- *          return 0 success, -1 on failure with errno set.
  */
 #ifndef LL_SUPER_MAGIC
 #define LL_SUPER_MAGIC                    0x0BD00BD0     /* Lustre magic number */
@@ -442,7 +426,6 @@ char* opal_find_absolute_path( char* app_name )
 
 bool opal_path_nfs(char *fname)
 {
-#if !defined(__WINDOWS__)
     int i;
     int rc;
     int trials;
@@ -530,17 +513,12 @@ found:
     return true;
 
 #undef FS_TYPES_NUM
-
-#else
-    return false;
-#endif /* __WINDOWS__ */
 }
 
 int
 opal_path_df(const char *path,
              uint64_t *out_avail)
 {
-#if !defined(__WINDOWS__)
     int rc = -1;
     int trials = 5;
     int err = 0;
@@ -582,27 +560,4 @@ opal_path_df(const char *path,
                          path, *out_avail));
 
     return OPAL_SUCCESS;
-
-#else /* defined __WINDOWS__ */
-    *out_avail = 0;
-    if (!GetDiskFreeSpaceEx(NULL, (PULARGE_INTEGER)out_avail, NULL, NULL)) {
-        DWORD dwSectorsPerCluster = 0, dwBytesPerSector = 0;
-        DWORD dwFreeClusters = 0, dwTotalClusters = 0;
-
-        if (!GetDiskFreeSpaceA(NULL, &dwSectorsPerCluster,
-            &dwBytesPerSector, &dwFreeClusters, &dwTotalClusters)) {
-            OPAL_OUTPUT_VERBOSE((10, 2, "opal_path_df: GetDiskFreeSpaceA on "
-                        "path: %s failed with errno: %d (%s)\n",
-                        path, err, strerror(err)));
-            return OPAL_ERROR;
-        }
-        *out_avail = dwFreeClusters * dwSectorsPerCluster * dwBytesPerSector;
-    }
-
-    OPAL_OUTPUT_VERBOSE((10, 2, "opal_path_df: stat(v)fs states "
-                        "path: %s has %"PRIu64 " B of free space.",
-                        path, *out_avail));
-
-    return OPAL_SUCCESS;
-#endif /* !defined(__WINDOWS__) */
 }

opal/util/stacktrace.c

@@ -66,7 +66,7 @@ static char *unable_to_print_msg = "Unable to print stack trace!\n";
  *
  * FIXME: Should distinguish for systems, which don't have siginfo...
  */
-#if OPAL_WANT_PRETTY_PRINT_STACKTRACE && ! defined(__WINDOWS__)
+#if OPAL_WANT_PRETTY_PRINT_STACKTRACE
 static void show_stackframe (int signo, siginfo_t * info, void * p)
 {   
     char print_buffer[1024];
@@ -379,7 +379,7 @@ static void show_stackframe (int signo, siginfo_t * info, void * p)
     fflush(stderr);
 }
 
-#endif /* OPAL_WANT_PRETTY_PRINT_STACKTRACE && ! defined(__WINDOWS__) */
+#endif /* OPAL_WANT_PRETTY_PRINT_STACKTRACE */
 
 
 #if OPAL_WANT_PRETTY_PRINT_STACKTRACE
@@ -453,7 +453,7 @@ char *opal_stackframe_output_string(void)
  */
 int opal_util_register_stackhandlers (void)
 {
-#if OPAL_WANT_PRETTY_PRINT_STACKTRACE && ! defined(__WINDOWS__)
+#if OPAL_WANT_PRETTY_PRINT_STACKTRACE
     struct sigaction act, old;
     char * string_value;
     char * tmp;
@@ -535,7 +535,7 @@ int opal_util_register_stackhandlers (void)
       }
     }
     free(string_value);
-#endif /* OPAL_WANT_PRETTY_PRINT_STACKTRACE && ! defined(__WINDOWS__) */
+#endif /* OPAL_WANT_PRETTY_PRINT_STACKTRACE */
 
     return OPAL_SUCCESS;
 }

opal/util/sys_limits.c

@@ -56,9 +56,7 @@ OPAL_DECLSPEC opal_sys_limits_t opal_sys_limits = {
 
 int opal_util_init_sys_limits(void)
 {
-#ifndef __WINDOWS__    
     struct rlimit rlim, rlim_set;
-#endif
     int value;
     bool set_lims;
 
@@ -67,9 +65,6 @@ int opal_util_init_sys_limits(void)
                                 false, false, (int)false, &value);
     set_lims = OPAL_INT_TO_BOOL(value);
 
-#ifdef __WINDOWS__
-    /* George: please insert whatever is needed here someday */
-#else
     /* get/set the system limits on number of files we can have open */
     if (0 <= getrlimit (RLIMIT_NOFILE, &rlim)) {
         if (set_lims) {
@@ -110,7 +105,6 @@ int opal_util_init_sys_limits(void)
     
     /* indicate we initialized the limits structure */
     opal_sys_limits.initialized = true;
-#endif
 
   return OPAL_SUCCESS;
 }