lanl: help out lanl admins

LANL admins want platform files and *.conf
files so oblige them.

Signed-off-by: Howard Pritchard <howardp@lanl.gov>

contrib/platform/lanl/cray_xc_cle5.2/debug-common

@@ -0,0 +1,39 @@
+# do not use IB verbs
+with_verbs=no
+
+enable_dlopen=no
+enable_mem_profile=no
+enable_binaries=yes
+enable_heterogeneous=no
+enable_shared=yes
+enable_static=yes
+enable_orte_static_ports=no
+enable_ipv6=no
+enable_mpi_fortran=yes
+
+# enable debugging
+enable_mem_debug=yes
+enable_debug_symbols=yes
+enable_picky=yes
+enable_debug=yes
+
+# disable c++ bindings (removed in MPI 3.0)
+enable_mpi_cxx=no
+enable_mpi_cxx_seek=no
+enable_cxx_exceptions=no
+
+enable_per_user_config_files=no
+enable_pty_support=no
+enable_mca_no_build=crs,filem,routed-linear,snapc,pml-dr,pml-crcp2,pml-crcpw,pml-v,pml-example,crcp,pml-cm,ess-cnos,grpcomm-cnos,plm-rsh,btl-tcp,oob-ud,ras-simulator
+
+# enable direct calling for ob1
+enable_mca_direct=pml-ob1
+
+# enable development headers
+with_devel_headers=yes
+
+# enable ptmalloc (enables lazy deregistration)
+with_memory_manager=linux
+
+# disable valgrind
+with_valgrind=no

contrib/platform/lanl/cray_xc_cle5.2/debug-lustre

@@ -0,0 +1,19 @@
+# (c) 2012-2015 Los Alamos National Security, LLC. All rights reserved.
+# Open MPI configuration for Cray XC v2.x GNU compiler,
+# Lustre
+
+if test "$CC" = "cc" ; then
+   echo "ERROR: Open MPI should not be compiled with Cray's wrapper compilers (cc/CC/ftn)"
+   exit 1
+fi
+
+source debug-common
+
+if test "$CC" = "icc" ; then
+   source intel-common
+else
+   source gnu-common
+fi
+
+# enable and Lustre in romio
+with_io_romio_flags="--with-file-system=ufs+nfs+lustre CFLAGS=-I/opt/cray/lustre-cray_gem_s/default/include"

contrib/platform/lanl/cray_xc_cle5.2/debug-lustre.conf

@@ -0,0 +1,104 @@
+#
+# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
+#                         University Research and Technology
+#                         Corporation.  All rights reserved.
+# Copyright (c) 2004-2005 The University of Tennessee and The University
+#                         of Tennessee Research Foundation.  All rights
+#                         reserved.
+# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
+#                         University of Stuttgart.  All rights reserved.
+# Copyright (c) 2004-2005 The Regents of the University of California.
+#                         All rights reserved.
+# Copyright (c) 2006      Cisco Systems, Inc.  All rights reserved.
+# Copyright (c) 2015      Los Alamos National Security, LLC.
+#                         All rights reserved.
+# $COPYRIGHT$
+#
+# Additional copyrights may follow
+#
+# $HEADER$
+#
+
+# This is the default system-wide MCA parameters defaults file.
+# Specifically, the MCA parameter "mca_param_files" defaults to a
+# value of
+# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf"
+# (this file is the latter of the two).  So if the default value of
+# mca_param_files is not changed, this file is used to set system-wide
+# MCA parameters.  This file can therefore be used to set system-wide
+# default MCA parameters for all users.  Of course, users can override
+# these values if they want, but this file is an excellent location
+# for setting system-specific MCA parameters for those users who don't
+# know / care enough to investigate the proper values for them.
+
+# Note that this file is only applicable where it is visible (in a
+# filesystem sense).  Specifically, MPI processes each read this file
+# during their startup to determine what default values for MCA
+# parameters should be used.  mpirun does not bundle up the values in
+# this file from the node where it was run and send them to all nodes;
+# the default value decisions are effectively distributed.  Hence,
+# these values are only applicable on nodes that "see" this file.  If
+# $sysconf is a directory on a local disk, it is likely that changes
+# to this file will need to be propagated to other nodes.  If $sysconf
+# is a directory that is shared via a networked filesystem, changes to
+# this file will be visible to all nodes that share this $sysconf.
+
+# The format is straightforward: one per line, mca_param_name =
+# rvalue.  Quoting is ignored (so if you use quotes or escape
+# characters, they'll be included as part of the value).  For example:
+
+# Disable run-time MPI parameter checking
+#   mpi_param_check = 0
+
+# Note that the value "~/" will be expanded to the current user's home
+# directory.  For example:
+
+# Change component loading path
+#   component_path = /usr/local/lib/openmpi:~/my_openmpi_components
+
+# See "ompi_info --param all all" for a full listing of Open MPI MCA
+# parameters available and their default values.
+#
+
+# Basic behavior to smooth startup
+mca_base_component_show_load_errors = 0
+orte_report_launch_progress = 1
+
+# Set line buffering for stdout/stderr
+ess_base_stream_buffering = 1
+
+# Define timeout for daemons to report back during launch
+orte_startup_timeout = 360
+
+## Protect the shared file systems
+orte_no_session_dirs = /lustre,/panfs,/scratch,/lscratch,/users,/usr/projects
+orte_tmpdir_base = /var/tmp
+
+## Require an allocation to run - protects the frontend
+## from inadvertent job executions
+orte_allocation_required = 1
+
+## Deal with the allocator
+orte_strip_prefix = nid
+orte_retain_aliases = 1
+# 1st alias entry is the stripped node name,
+# 2nd is the unstripped one
+orte_hostname_alias_index = 2
+
+## Add the interface for out-of-band communication
+## and set it up
+oob_tcp_if_include=ipogif0
+oob_tcp_peer_retries = 1000
+oob_tcp_sndbuf = 32768
+oob_tcp_rcvbuf = 32768
+
+## Define the MPI interconnects
+btl = self,vader,ugni
+
+## Enable cpu affinity
+hwloc_base_binding_policy = core
+
+## Setup MPI options
+mpi_show_handle_leaks = 1
+mpi_warn_on_fork = 1
+#mpi_abort_print_stack = 1

contrib/platform/lanl/cray_xc_cle5.2/optimized-common

@@ -0,0 +1,47 @@
+# do not use IB verbs
+with_verbs=no
+
+enable_dlopen=no
+
+enable_mem_profile=no
+enable_binaries=yes
+
+enable_heterogeneous=no
+enable_shared=yes
+enable_static=yes
+
+enable_orte_static_ports=no
+
+enable_ipv6=no
+
+# enable fortran bindings
+enable_mpi_fortran=yes
+
+# disable debugging
+enable_mem_debug=no
+enable_debug_symbols=no
+enable_picky=no
+enable_debug=no
+
+# disable c++ bindings (removed in MPI 3.0)
+enable_mpi_cxx=no
+enable_mpi_cxx_seek=no
+enable_cxx_exceptions=no
+
+enable_per_user_config_files=no
+enable_pty_support=no
+enable_mca_no_build=crs,filem,routed-linear,snapc,pml-dr,pml-crcp2,pml-crcpw,pml-v,pml-example,crcp,pml-cm,ess-cnos,grpcomm-cnos,plm-rsh,btl-tcp,oob-ud,ras-simulator,mpool-fake
+enable_mca_static=btl:ugni,btl:self,btl:vader,pml:ob1
+#enable_contrib_no_build=libnbc
+
+# enable direct calling for ob1
+enable_mca_direct=pml-ob1
+
+# enable development headers
+with_devel_headers=yes
+
+# enable ptmalloc (enables lazy deregistration)
+with_memory_manager=linux
+
+# disable valgrind
+with_valgrind=no

contrib/platform/lanl/cray_xc_cle5.2/optimized-lustre

@@ -0,0 +1,17 @@
+# (c) 2012-2015 Los Alamos National Security, LLC. All rights reserved.
+# Open MPI configuration for Cray XC v2.x GNU compiler,
+# Lustre
+
+if test "$CC" = "cc" ; then
+   echo "ERROR: Open MPI should not be compiled with Cray's wrapper compilers (cc/CC/ftn)"
+   exit 1
+fi
+
+if test "$enable_debug" = "yes"; then
+   source debug-common
+else
+   source optimized-common
+fi
+
+# enable and Lustre in romio
+with_io_romio_flags="--with-file-system=ufs+nfs+lustre CFLAGS=-I/opt/cray/lustre-cray_gem_s/default/include"

contrib/platform/lanl/cray_xc_cle5.2/optimized-lustre.conf

@@ -0,0 +1,107 @@
+#
+# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
+#                         University Research and Technology
+#                         Corporation.  All rights reserved.
+# Copyright (c) 2004-2005 The University of Tennessee and The University
+#                         of Tennessee Research Foundation.  All rights
+#                         reserved.
+# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
+#                         University of Stuttgart.  All rights reserved.
+# Copyright (c) 2004-2005 The Regents of the University of California.
+#                         All rights reserved.
+# Copyright (c) 2006      Cisco Systems, Inc.  All rights reserved.
+# Copyright (c) 2015      Los Alamos National Security, LLC.
+#                         All rights reserved.
+# $COPYRIGHT$
+#
+# Additional copyrights may follow
+#
+# $HEADER$
+#
+
+# This is the default system-wide MCA parameters defaults file.
+# Specifically, the MCA parameter "mca_param_files" defaults to a
+# value of
+# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf"
+# (this file is the latter of the two).  So if the default value of
+# mca_param_files is not changed, this file is used to set system-wide
+# MCA parameters.  This file can therefore be used to set system-wide
+# default MCA parameters for all users.  Of course, users can override
+# these values if they want, but this file is an excellent location
+# for setting system-specific MCA parameters for those users who don't
+# know / care enough to investigate the proper values for them.
+
+# Note that this file is only applicable where it is visible (in a
+# filesystem sense).  Specifically, MPI processes each read this file
+# during their startup to determine what default values for MCA
+# parameters should be used.  mpirun does not bundle up the values in
+# this file from the node where it was run and send them to all nodes;
+# the default value decisions are effectively distributed.  Hence,
+# these values are only applicable on nodes that "see" this file.  If
+# $sysconf is a directory on a local disk, it is likely that changes
+# to this file will need to be propagated to other nodes.  If $sysconf
+# is a directory that is shared via a networked filesystem, changes to
+# this file will be visible to all nodes that share this $sysconf.
+
+# The format is straightforward: one per line, mca_param_name =
+# rvalue.  Quoting is ignored (so if you use quotes or escape
+# characters, they'll be included as part of the value).  For example:
+
+# Disable run-time MPI parameter checking
+#   mpi_param_check = 0
+
+# Note that the value "~/" will be expanded to the current user's home
+# directory.  For example:
+
+# Change component loading path
+#   component_path = /usr/local/lib/openmpi:~/my_openmpi_components
+
+# See "ompi_info --param all all" for a full listing of Open MPI MCA
+# parameters available and their default values.
+#
+
+# Basic behavior to smooth startup
+mca_base_component_show_load_errors = 0
+#orte_report_launch_progress = 1
+
+# Set line buffering for stdout/stderr
+ess_base_stream_buffering = 1
+
+# Define timeout for daemons to report back during launch
+orte_startup_timeout = 360
+
+## Protect the shared file systems
+orte_no_session_dirs = /lustre,/panfs,/scratch,/lscratch,/users,/usr/projects
+orte_tmpdir_base = /var/tmp
+
+## Require an allocation to run - protects the frontend
+## from inadvertent job executions
+orte_allocation_required = 1
+
+## Deal with the allocator
+orte_strip_prefix = nid
+orte_retain_aliases = 1
+# 1st alias entry is the stripped node name,
+# 2nd is the unstripped one
+orte_hostname_alias_index = 2
+
+## Add the interface for out-of-band communication
+## and set it up
+oob_tcp_if_include=ipogif0
+oob_tcp_peer_retries = 1000
+oob_tcp_sndbuf = 32768
+oob_tcp_rcvbuf = 32768
+
+## Define the MPI interconnects
+btl = self,vader,ugni
+
+## Setup Gemini
+# TODO LANL
+
+## Enable cpu affinity
+hwloc_base_binding_policy = core
+
+## Setup MPI options
+mpi_show_handle_leaks = 1
+mpi_warn_on_fork = 1
+#mpi_abort_print_stack = 1