Minor adjustments to lanl platform files, addition of slave configuration

This commit was SVN r20487.

contrib/platform/lanl/rr-class/debug-nopanasas

@@ -3,7 +3,7 @@ enable_mem_debug=yes
 enable_mem_profile=yes
 enable_debug_symbols=yes
 enable_binaries=yes
-enable_heterogeneous=no
+enable_heterogeneous=yes
 enable_picky=yes
 enable_debug=yes
 enable_shared=yes
@@ -16,7 +16,7 @@ enable_mpi_cxx_seek=yes
 enable_cxx_exceptions=yes
 enable_ft_thread=no
 enable_per_user_config_files=no
-enable_mca_no_build=crs,routed-direct,routed-linear,snapc,pml-dr,pml-crcp2,pml-crcpw,pml-v,pml-example,crcp,pml-cm,btl-tcp
+enable_mca_no_build=crs,routed-direct,routed-linear,snapc,pml-dr,pml-crcp2,pml-crcpw,pml-v,pml-example,crcp,pml-cm,filem
 enable_contrib_no_build=libnbc,vt
 with_tm=/opt/PBS
 with_openib=/opt/ofed

contrib/platform/lanl/rr-class/debug-panasas

@@ -3,7 +3,7 @@ enable_mem_debug=yes
 enable_mem_profile=yes
 enable_debug_symbols=yes
 enable_binaries=yes
-enable_heterogeneous=no
+enable_heterogeneous=yes
 enable_picky=yes
 enable_debug=yes
 enable_shared=yes
@@ -16,7 +16,7 @@ enable_mpi_cxx_seek=yes
 enable_cxx_exceptions=yes
 enable_ft_thread=no
 enable_per_user_config_files=no
-enable_mca_no_build=crs,routed-direct,routed-linear,snapc,pml-dr,pml-crcp2,pml-crcpw,pml-v,pml-example,crcp,pml-cm,btl-tcp
+enable_mca_no_build=crs,routed-direct,routed-linear,snapc,pml-dr,pml-crcp2,pml-crcpw,pml-v,pml-example,crcp,pml-cm,filem
 enable_contrib_no_build=libnbc,vt
 with_tm=/opt/PBS
 with_openib=/opt/ofed

contrib/platform/lanl/rr-class/debug.conf

@@ -73,7 +73,7 @@ orte_allocation_required = 1
 
 ## Add the interface for out-of-band communication
 ## and set it up
-oob_tcp_if_include=ib0 
+oob_tcp_if_include=ib0,eth0
 oob_tcp_peer_retries = 10
 oob_tcp_disable_family = IPv6 
 oob_tcp_listen_mode = listen_thread
@@ -82,7 +82,7 @@ oob_tcp_rcvbuf = 32768
 
 
 ## Define the MPI interconnects
-btl = sm,openib,self 
+btl = sm,openib,tcp,self 
 
 ## Setup OpenIB
 btl_openib_want_fork_support = 0

contrib/platform/lanl/rr-class/optimized-nopanasas

@@ -3,7 +3,7 @@ enable_mem_debug=no
 enable_mem_profile=no
 enable_debug_symbols=no
 enable_binaries=yes
-enable_heterogeneous=no
+enable_heterogeneous=yes
 enable_debug=no
 enable_shared=yes
 enable_static=yes
@@ -16,7 +16,7 @@ enable_mpi_cxx_seek=yes
 enable_cxx_exceptions=no
 enable_ft_thread=no
 enable_per_user_config_files=no
-enable_mca_no_build=crs,routed-direct,routed-linear,snapc,pml-dr,pml-crcp2,pml-crcpw,pml-v,pml-example,crcp,pml-cm,btl-tcp
+enable_mca_no_build=crs,routed-direct,routed-linear,snapc,pml-dr,pml-crcp2,pml-crcpw,pml-v,pml-example,crcp,pml-cm,filem
 enable_contrib_no_build=libnbc,vt
 with_tm=/opt/PBS
 with_openib=/opt/ofed

contrib/platform/lanl/rr-class/optimized-panasas

@@ -16,7 +16,7 @@ enable_mpi_cxx_seek=yes
 enable_cxx_exceptions=no
 enable_ft_thread=no
 enable_per_user_config_files=no
-enable_mca_no_build=crs,routed-direct,routed-linear,snapc,pml-dr,pml-crcp2,pml-crcpw,pml-v,pml-example,crcp,pml-cm,btl-tcp
+enable_mca_no_build=crs,routed-direct,routed-linear,snapc,pml-dr,pml-crcp2,pml-crcpw,pml-v,pml-example,crcp,pml-cm,filem
 enable_contrib_no_build=libnbc,vt
 with_tm=/opt/PBS
 with_openib=/opt/ofed

contrib/platform/lanl/rr-class/optimized.conf

@@ -73,7 +73,7 @@ orte_allocation_required = 1
 
 ## Add the interface for out-of-band communication
 ## and set it up
-oob_tcp_if_include=ib0 
+oob_tcp_if_include=ib0,eth0
 oob_tcp_peer_retries = 10
 oob_tcp_disable_family = IPv6 
 oob_tcp_listen_mode = listen_thread
@@ -81,7 +81,7 @@ oob_tcp_sndbuf = 32768
 oob_tcp_rcvbuf = 32768
 
 ## Define the MPI interconnects
-btl = sm,openib,self 
+btl = sm,openib,tcp,self 
 
 ## Setup OpenIB
 btl_openib_want_fork_support = 0

contrib/platform/lanl/rr-class/slave

@@ -0,0 +1,27 @@
+enable_dlopen=no
+enable_mem_debug=no
+enable_mem_profile=no
+enable_debug_symbols=no
+enable_binaries=no
+enable_heterogeneous=yes
+enable_debug=no
+enable_shared=no
+enable_static=yes
+enable_memchecker=no
+enable_ipv6=no
+enable_mpi_f77=yes
+enable_mpi_f90=yes
+enable_mpi_cxx=yes
+enable_mpi_cxx_seek=yes
+enable_cxx_exceptions=no
+enable_ft_thread=no
+enable_per_user_config_files=no
+enable_mca_no_build=crs,routed-direct,routed-linear,routed-radix,snapc,pml-dr,pml-crcp2,pml-crcpw,pml-v,pml-example,crcp,pml-cm,btl-openib,btl-sm,filem,plm-tm
+enable_contrib_no_build=libnbc,vt
+with_tm=no
+with_openib=no
+with_devel_headers=yes
+with_slurm=no
+with_io_romio_flags=--with-file-system=ufs+nfs
+with_threads=posix
+LDFLAGS=-L/opt/PBS/lib64

contrib/platform/lanl/rr-class/slave.conf

@@ -0,0 +1,84 @@
+#
+# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
+#                         University Research and Technology
+#                         Corporation.  All rights reserved.
+# Copyright (c) 2004-2005 The University of Tennessee and The University
+#                         of Tennessee Research Foundation.  All rights
+#                         reserved.
+# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart, 
+#                         University of Stuttgart.  All rights reserved.
+# Copyright (c) 2004-2005 The Regents of the University of California.
+#                         All rights reserved.
+# Copyright (c) 2006      Cisco Systems, Inc.  All rights reserved.
+# $COPYRIGHT$
+# 
+# Additional copyrights may follow
+# 
+# $HEADER$
+#
+
+# This is the default system-wide MCA parameters defaults file.
+# Specifically, the MCA parameter "mca_param_files" defaults to a
+# value of
+# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf"
+# (this file is the latter of the two).  So if the default value of
+# mca_param_files is not changed, this file is used to set system-wide
+# MCA parameters.  This file can therefore be used to set system-wide
+# default MCA parameters for all users.  Of course, users can override
+# these values if they want, but this file is an excellent location
+# for setting system-specific MCA parameters for those users who don't
+# know / care enough to investigate the proper values for them.
+
+# Note that this file is only applicable where it is visible (in a
+# filesystem sense).  Specifically, MPI processes each read this file
+# during their startup to determine what default values for MCA
+# parameters should be used.  mpirun does not bundle up the values in
+# this file from the node where it was run and send them to all nodes;
+# the default value decisions are effectively distributed.  Hence,
+# these values are only applicable on nodes that "see" this file.  If
+# $sysconf is a directory on a local disk, it is likely that changes
+# to this file will need to be propagated to other nodes.  If $sysconf
+# is a directory that is shared via a networked filesystem, changes to
+# this file will be visible to all nodes that share this $sysconf.
+
+# The format is straightforward: one per line, mca_param_name =
+# rvalue.  Quoting is ignored (so if you use quotes or escape
+# characters, they'll be included as part of the value).  For example:
+
+# Disable run-time MPI parameter checking
+#   mpi_param_check = 0
+
+# Note that the value "~/" will be expanded to the current user's home
+# directory.  For example:
+
+# Change component loading path
+#   component_path = /usr/local/lib/openmpi:~/my_openmpi_components
+
+# See "ompi_info --param all all" for a full listing of Open MPI MCA
+# parameters available and their default values.
+#
+
+# Basic behavior to smooth startup
+mca_component_show_load_errors = 0
+orte_abort_timeout = 10 
+opal_set_max_sys_limits = 1
+
+## Protect the shared file systems
+orte_no_session_dirs = /panfs,/scratch,/users,/usr/projects
+orte_tmpdir_base = /tmp
+
+## Add the interface for out-of-band communication
+## and set it up
+oob_tcp_if_include=eth0 
+oob_tcp_peer_retries = 10
+oob_tcp_disable_family = IPv6 
+oob_tcp_listen_mode = listen_thread
+oob_tcp_sndbuf = 32768
+oob_tcp_rcvbuf = 32768
+
+## Define the MPI interconnects
+btl = tcp,self 
+
+## Setup MPI options
+mpi_show_handle_leaks = 0
+mpi_warn_on_fork = 1