1
1
cmr=v1.7.4:reviewer=ompi-gk1.7

This commit was SVN r29625.
Этот коммит содержится в:
Nathan Hjelm 2013-11-06 22:43:21 +00:00
родитель d37a5faa20
Коммит 0df678f1ea
38 изменённых файлов: 0 добавлений и 1821 удалений

Просмотреть файл

@ -56,30 +56,6 @@ EXTRA_DIST = \
platform/lanl/cray_xe6/optimized-common \
platform/lanl/cray_xe6/optimized-lustre \
platform/lanl/cray_xe6/optimized-lustre.conf \
platform/lanl/rr-class/cross-debug-slave \
platform/lanl/rr-class/cross-debug-slave.conf \
platform/lanl/rr-class/cross-optimized-slave \
platform/lanl/rr-class/cross-optimized-slave.conf \
platform/lanl/rr-class/debug-nopanasas \
platform/lanl/rr-class/debug-nopanasas.conf \
platform/lanl/rr-class/debug-panasas \
platform/lanl/rr-class/debug-panasas.conf \
platform/lanl/rr-class/optimized-nopanasas \
platform/lanl/rr-class/optimized-nopanasas.conf \
platform/lanl/rr-class/optimized-panasas \
platform/lanl/rr-class/optimized-panasas.conf \
platform/lanl/rr-class/debug-master \
platform/lanl/rr-class/debug-master.conf \
platform/lanl/rr-class/optimized-master \
platform/lanl/rr-class/optimized-master.conf \
platform/lanl/rr-class/debug-panasas-nocell \
platform/lanl/rr-class/debug-panasas-nocell.conf \
platform/lanl/rr-class/debug-nopanasas-nocell \
platform/lanl/rr-class/debug-nopanasas-nocell.conf \
platform/lanl/rr-class/optimized-nopanasas-nocell \
platform/lanl/rr-class/optimized-nopanasas-nocell.conf \
platform/lanl/rr-class/optimized-panasas-nocell \
platform/lanl/rr-class/optimized-panasas-nocell.conf \
platform/lanl/toss/debug-common \
platform/lanl/toss/debug-nopanasas \
platform/lanl/toss/debug-nopanasas.conf \

Просмотреть файл

@ -62,7 +62,6 @@
# Basic behavior to smooth startup
mca_base_component_show_load_errors = 0
orte_abort_timeout = 10
orte_report_launch_progress = 1
# Set line buffering for stdout/stderr

Просмотреть файл

@ -62,7 +62,6 @@
# Basic behavior to smooth startup
mca_base_component_show_load_errors = 0
orte_abort_timeout = 10
orte_report_launch_progress = 1
# Set line buffering for stdout/stderr

Просмотреть файл

@ -62,7 +62,6 @@
# Basic behavior to smooth startup
mca_base_component_show_load_errors = 0
orte_abort_timeout = 10
opal_set_max_sys_limits = 1
orte_report_launch_progress = 1

Просмотреть файл

@ -62,7 +62,6 @@
# Basic behavior to smooth startup
mca_base_component_show_load_errors = 0
orte_abort_timeout = 10
opal_set_max_sys_limits = 1
orte_report_launch_progress = 1

Просмотреть файл

@ -62,7 +62,6 @@
# Basic behavior to smooth startup
mca_base_component_show_load_errors = 0
orte_abort_timeout = 10
opal_set_max_sys_limits = 1
orte_report_launch_progress = 1

Просмотреть файл

@ -62,7 +62,6 @@
# Basic behavior to smooth startup
mca_base_component_show_load_errors = 0
orte_abort_timeout = 10
opal_set_max_sys_limits = 1
orte_report_launch_progress = 1

Просмотреть файл

@ -60,5 +60,3 @@
# Basic behavior to smooth startup
mca_base_component_show_load_errors = 0
orte_abort_timeout = 10

Просмотреть файл

@ -58,6 +58,3 @@
# parameters available and their default values.
#
# Basic behavior to smooth startup
orte_abort_timeout = 10

Просмотреть файл

@ -60,5 +60,4 @@
# Basic behavior to smooth startup
mca_base_component_show_load_errors = 0
orte_abort_timeout = 10

Просмотреть файл

@ -57,7 +57,3 @@
# See "ompi_info --param all all" for a full listing of Open MPI MCA
# parameters available and their default values.
#
# Basic behavior to smooth startup
orte_abort_timeout = 10

Просмотреть файл

@ -60,5 +60,4 @@
# Basic behavior to smooth startup
mca_base_component_show_load_errors = 0
orte_abort_timeout = 10

Просмотреть файл

@ -1,34 +0,0 @@
enable_dlopen=no
enable_mem_debug=no
enable_mem_profile=no
enable_debug_symbols=yes
enable_binaries=yes
enable_heterogeneous=yes
enable_debug=yes
enable_shared=no
enable_static=yes
enable_memchecker=no
enable_ipv6=no
enable_mpi_fortran=no
enable_mpi_cxx=no
enable_mpi_cxx_seek=no
enable_cxx_exceptions=no
enable_ft_thread=no
enable_per_user_config_files=no
enable_script_wrapper_compilers=yes
enable_io_romio=no
enable_mca_no_build=carto,crs,routed-linear,routed-radix,routed-binomial,routed-direct,snapc,pml-dr,pml-crcp2,pml-crcpw,pml-v,pml-example,crcp,pml-cm,btl-openib,btl-sm,filem,plm-tm,pml-csum
enable_contrib_no_build=libnbc,vt
with_tm=no
with_verbs=no
with_devel_headers=yes
with_slurm=no
with_memory_manager=ptmalloc2
CC=/opt/cell/toolchain/bin/ppu-gcc
CXX=/opt/cell/toolchain/bin/ppu-g++
LDFLAGS="-m64"
CFLAGS="-m64"
CXXFLAGS="-m64"
with_wrapper_ldflags="-m64"
with_wrapper_cflags="-m64"
with_wrapper_cxxflags="-m64"

Просмотреть файл

@ -1,84 +0,0 @@
#
# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
# University Research and Technology
# Corporation. All rights reserved.
# Copyright (c) 2004-2005 The University of Tennessee and The University
# of Tennessee Research Foundation. All rights
# reserved.
# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
# University of Stuttgart. All rights reserved.
# Copyright (c) 2004-2005 The Regents of the University of California.
# All rights reserved.
# Copyright (c) 2006 Cisco Systems, Inc. All rights reserved.
# $COPYRIGHT$
#
# Additional copyrights may follow
#
# $HEADER$
#
# This is the default system-wide MCA parameters defaults file.
# Specifically, the MCA parameter "mca_param_files" defaults to a
# value of
# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf"
# (this file is the latter of the two). So if the default value of
# mca_param_files is not changed, this file is used to set system-wide
# MCA parameters. This file can therefore be used to set system-wide
# default MCA parameters for all users. Of course, users can override
# these values if they want, but this file is an excellent location
# for setting system-specific MCA parameters for those users who don't
# know / care enough to investigate the proper values for them.
# Note that this file is only applicable where it is visible (in a
# filesystem sense). Specifically, MPI processes each read this file
# during their startup to determine what default values for MCA
# parameters should be used. mpirun does not bundle up the values in
# this file from the node where it was run and send them to all nodes;
# the default value decisions are effectively distributed. Hence,
# these values are only applicable on nodes that "see" this file. If
# $sysconf is a directory on a local disk, it is likely that changes
# to this file will need to be propagated to other nodes. If $sysconf
# is a directory that is shared via a networked filesystem, changes to
# this file will be visible to all nodes that share this $sysconf.
# The format is straightforward: one per line, mca_param_name =
# rvalue. Quoting is ignored (so if you use quotes or escape
# characters, they'll be included as part of the value). For example:
# Disable run-time MPI parameter checking
# mpi_param_check = 0
# Note that the value "~/" will be expanded to the current user's home
# directory. For example:
# Change component loading path
# component_path = /usr/local/lib/openmpi:~/my_openmpi_components
# See "ompi_info --param all all" for a full listing of Open MPI MCA
# parameters available and their default values.
#
# Basic behavior to smooth startup
mca_base_component_show_load_errors = 0
orte_abort_timeout = 10
opal_set_max_sys_limits = 1
## Protect the shared file systems
orte_no_session_dirs = /panfs,/scratch,/users,/usr/projects
orte_tmpdir_base = /tmp
## Add the interface for out-of-band communication
## and set it up
oob_tcp_if_include=eth0
oob_tcp_peer_retries = 1000
oob_tcp_disable_family = IPv6
oob_tcp_listen_mode = listen_thread
oob_tcp_sndbuf = 32768
oob_tcp_rcvbuf = 32768
## Define the MPI interconnects
btl = tcp,self
## Setup MPI options
mpi_show_handle_leaks = 0
mpi_warn_on_fork = 1

Просмотреть файл

@ -1,34 +0,0 @@
enable_dlopen=no
enable_mem_debug=no
enable_mem_profile=no
enable_debug_symbols=no
enable_binaries=yes
enable_heterogeneous=yes
enable_debug=no
enable_shared=no
enable_static=yes
enable_memchecker=no
enable_ipv6=no
enable_mpi_fortran=no
enable_mpi_cxx=no
enable_mpi_cxx_seek=no
enable_cxx_exceptions=no
enable_ft_thread=no
enable_per_user_config_files=no
enable_script_wrapper_compilers=yes
enable_io_romio=no
enable_mca_no_build=carto,crs,routed-linear,routed-radix,routed-binomial,routed-direct,snapc,pml-dr,pml-crcp2,pml-crcpw,pml-v,pml-example,crcp,pml-cm,btl-openib,btl-sm,filem,plm-tm,pml-csum
enable_contrib_no_build=libnbc,vt
with_tm=no
with_verbs=no
with_devel_headers=yes
with_slurm=no
with_memory_manager=ptmalloc2
CC=/opt/cell/toolchain/bin/ppu-gcc
CXX=/opt/cell/toolchain/bin/ppu-g++
LDFLAGS="-m64"
CFLAGS="-m64"
CXXFLAGS="-m64"
with_wrapper_ldflags="-m64"
with_wrapper_cflags="-m64"
with_wrapper_cxxflags="-m64"

Просмотреть файл

@ -1,84 +0,0 @@
#
# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
# University Research and Technology
# Corporation. All rights reserved.
# Copyright (c) 2004-2005 The University of Tennessee and The University
# of Tennessee Research Foundation. All rights
# reserved.
# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
# University of Stuttgart. All rights reserved.
# Copyright (c) 2004-2005 The Regents of the University of California.
# All rights reserved.
# Copyright (c) 2006 Cisco Systems, Inc. All rights reserved.
# $COPYRIGHT$
#
# Additional copyrights may follow
#
# $HEADER$
#
# This is the default system-wide MCA parameters defaults file.
# Specifically, the MCA parameter "mca_param_files" defaults to a
# value of
# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf"
# (this file is the latter of the two). So if the default value of
# mca_param_files is not changed, this file is used to set system-wide
# MCA parameters. This file can therefore be used to set system-wide
# default MCA parameters for all users. Of course, users can override
# these values if they want, but this file is an excellent location
# for setting system-specific MCA parameters for those users who don't
# know / care enough to investigate the proper values for them.
# Note that this file is only applicable where it is visible (in a
# filesystem sense). Specifically, MPI processes each read this file
# during their startup to determine what default values for MCA
# parameters should be used. mpirun does not bundle up the values in
# this file from the node where it was run and send them to all nodes;
# the default value decisions are effectively distributed. Hence,
# these values are only applicable on nodes that "see" this file. If
# $sysconf is a directory on a local disk, it is likely that changes
# to this file will need to be propagated to other nodes. If $sysconf
# is a directory that is shared via a networked filesystem, changes to
# this file will be visible to all nodes that share this $sysconf.
# The format is straightforward: one per line, mca_param_name =
# rvalue. Quoting is ignored (so if you use quotes or escape
# characters, they'll be included as part of the value). For example:
# Disable run-time MPI parameter checking
# mpi_param_check = 0
# Note that the value "~/" will be expanded to the current user's home
# directory. For example:
# Change component loading path
# component_path = /usr/local/lib/openmpi:~/my_openmpi_components
# See "ompi_info --param all all" for a full listing of Open MPI MCA
# parameters available and their default values.
#
# Basic behavior to smooth startup
mca_base_component_show_load_errors = 0
orte_abort_timeout = 10
opal_set_max_sys_limits = 1
## Protect the shared file systems
orte_no_session_dirs = /panfs,/scratch,/users,/usr/projects
orte_tmpdir_base = /tmp
## Add the interface for out-of-band communication
## and set it up
oob_tcp_if_include=eth0
oob_tcp_peer_retries = 1000
oob_tcp_disable_family = IPv6
oob_tcp_listen_mode = listen_thread
oob_tcp_sndbuf = 32768
oob_tcp_rcvbuf = 32768
## Define the MPI interconnects
btl = tcp,self
## Setup MPI options
mpi_show_handle_leaks = 0
mpi_warn_on_fork = 1

Просмотреть файл

@ -1,42 +0,0 @@
enable_dlopen=no
enable_mem_debug=no
enable_mem_profile=no
enable_debug_symbols=no
enable_binaries=yes
enable_heterogeneous=yes
enable_debug=yes
enable_shared=yes
enable_static=yes
enable_memchecker=no
enable_ipv6=no
enable_mpi_fortran=yes
enable_mpi_cxx=yes
enable_mpi_cxx_seek=yes
enable_cxx_exceptions=no
enable_ft_thread=no
enable_per_user_config_files=no
enable_mca_no_build=carto,crs,routed-direct,routed-linear,snapc,pml-dr,pml-crcp2,pml-crcpw,pml-v,pml-example,crcp,pml-cm,filem,pml-csum
enable_contrib_no_build=libnbc,vt
with_tm=/opt/PBS
with_verbs=/opt/ofed
with_verbs_libdir=/opt/ofed/lib64
with_devel_headers=yes
with_slurm=no
with_io_romio_flags=--with-file-system=ufs+nfs+panfs
with_valgrind=no
LDFLAGS="-L/opt/PBS/lib64 -m64"
CFLAGS="-I/opt/panfs/include -m64"
CXXFLAGS="-I/opt/panfs/include -m64"
FCFLAGS="-I/opt/panfs/include -m64"
FFLAGS="-I/opt/panfs/include -m64"
CCASFLAGS="-I/opt/panfs/include -m64"
with_wrapper_ldflags="-m64"
with_wrapper_cflags="-m64"
with_wrapper_cxxflags="-m64"
with_wrapper_fcflags="-m64"
with_wrapper_fflags="-m64"
with_wrapper_ccasflags="-m64"
with_memory_manager=ptmalloc2
with_openib_control_hdr_padding=yes
with_dst_checksum=yes

Просмотреть файл

@ -1,111 +0,0 @@
#
# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
# University Research and Technology
# Corporation. All rights reserved.
# Copyright (c) 2004-2005 The University of Tennessee and The University
# of Tennessee Research Foundation. All rights
# reserved.
# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
# University of Stuttgart. All rights reserved.
# Copyright (c) 2004-2005 The Regents of the University of California.
# All rights reserved.
# Copyright (c) 2006 Cisco Systems, Inc. All rights reserved.
# $COPYRIGHT$
#
# Additional copyrights may follow
#
# $HEADER$
#
# This is the default system-wide MCA parameters defaults file.
# Specifically, the MCA parameter "mca_param_files" defaults to a
# value of
# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf"
# (this file is the latter of the two). So if the default value of
# mca_param_files is not changed, this file is used to set system-wide
# MCA parameters. This file can therefore be used to set system-wide
# default MCA parameters for all users. Of course, users can override
# these values if they want, but this file is an excellent location
# for setting system-specific MCA parameters for those users who don't
# know / care enough to investigate the proper values for them.
# Note that this file is only applicable where it is visible (in a
# filesystem sense). Specifically, MPI processes each read this file
# during their startup to determine what default values for MCA
# parameters should be used. mpirun does not bundle up the values in
# this file from the node where it was run and send them to all nodes;
# the default value decisions are effectively distributed. Hence,
# these values are only applicable on nodes that "see" this file. If
# $sysconf is a directory on a local disk, it is likely that changes
# to this file will need to be propagated to other nodes. If $sysconf
# is a directory that is shared via a networked filesystem, changes to
# this file will be visible to all nodes that share this $sysconf.
# The format is straightforward: one per line, mca_param_name =
# rvalue. Quoting is ignored (so if you use quotes or escape
# characters, they'll be included as part of the value). For example:
# Disable run-time MPI parameter checking
# mpi_param_check = 0
# Note that the value "~/" will be expanded to the current user's home
# directory. For example:
# Change component loading path
# component_path = /usr/local/lib/openmpi:~/my_openmpi_components
# See "ompi_info --param all all" for a full listing of Open MPI MCA
# parameters available and their default values.
#
# Basic behavior to smooth startup
mca_base_component_show_load_errors = 0
orte_abort_timeout = 10
opal_set_max_sys_limits = 1
## Protect the shared file systems
orte_no_session_dirs = /panfs,/scratch,/users,/usr/projects
orte_tmpdir_base = /tmp
## Require an allocation to run - protects the frontend
## from inadvertent job executions
orte_allocation_required = 1
## MPI behavior
## Do NOT specify mpi_leave_pinned so system
## can figure out for itself whether or not
## it is supported and usable
## Protect looped collectives
coll_sync_priority = 100
coll_sync_barrier_before = 1000
## Activate hierarchical collectives
coll_hierarch_priority = 90
## Add the interface for out-of-band communication
## and set it up
oob_tcp_if_include=ib0,eth0
oob_tcp_peer_retries = 1000
oob_tcp_disable_family = IPv6
oob_tcp_listen_mode = listen_thread
oob_tcp_sndbuf = 32768
oob_tcp_rcvbuf = 32768
## Define the MPI interconnects
btl = sm,openib,tcp,self
btl_tcp_if_include = apnet0,apnet1,apnet2,apnet3,eth0
## Setup OpenIB
btl_openib_want_fork_support = 0
btl_openib_cpc_include = oob
btl_openib_flags = 2
btl_openib_max_btls=1
## Enable cpu affinity
hwloc_base_binding_policy = core
## Setup MPI options
mpi_show_handle_leaks = 0
mpi_warn_on_fork = 1

Просмотреть файл

@ -1,30 +0,0 @@
enable_dlopen=no
enable_mem_debug=yes
enable_mem_profile=yes
enable_debug_symbols=yes
enable_binaries=yes
enable_heterogeneous=no
enable_picky=yes
enable_debug=yes
enable_shared=yes
enable_static=yes
enable_ipv6=no
enable_mpi_fortran=yes
enable_mpi_cxx=yes
enable_mpi_cxx_seek=yes
enable_cxx_exceptions=yes
enable_ft_thread=no
enable_per_user_config_files=no
enable_mca_no_build=carto,crs,routed-direct,routed-linear,snapc,pml-dr,pml-crcp2,pml-crcpw,pml-v,pml-example,crcp,pml-cm,filem
enable_contrib_no_build=libnbc,vt
with_tm=/opt/PBS
with_verbs=/opt/ofed
with_verbs_libdir=/opt/ofed/lib64
with_devel_headers=yes
with_slurm=no
with_io_romio_flags=--with-file-system=ufs+nfs
with_valgrind=no
LDFLAGS="-L/opt/PBS/lib64"
with_memory_manager=ptmalloc2
with_openib_control_hdr_padding=yes
with_dst_checksum=yes

Просмотреть файл

@ -1,28 +0,0 @@
enable_dlopen=no
enable_mem_debug=yes
enable_mem_profile=yes
enable_debug_symbols=yes
enable_binaries=yes
enable_heterogeneous=no
enable_picky=yes
enable_debug=yes
enable_shared=yes
enable_static=yes
enable_ipv6=no
enable_mpi_fortran=yes
enable_mpi_cxx=yes
enable_mpi_cxx_seek=yes
enable_cxx_exceptions=yes
enable_ft_thread=no
enable_per_user_config_files=no
enable_mca_no_build=carto,crs,routed-direct,routed-linear,snapc,pml-csum,pml-dr,pml-crcp2,pml-crcpw,pml-v,pml-example,crcp,pml-cm,filem
enable_contrib_no_build=libnbc,vt
with_tm=/opt/PBS
with_verbs=/opt/ofed
with_verbs_libdir=/opt/ofed/lib64
with_devel_headers=yes
with_slurm=no
with_io_romio_flags=--with-file-system=ufs+nfs
with_valgrind=no
LDFLAGS="-L/opt/PBS/lib64"
with_memory_manager=ptmalloc2

Просмотреть файл

@ -1,122 +0,0 @@
#
# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
# University Research and Technology
# Corporation. All rights reserved.
# Copyright (c) 2004-2005 The University of Tennessee and The University
# of Tennessee Research Foundation. All rights
# reserved.
# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
# University of Stuttgart. All rights reserved.
# Copyright (c) 2004-2005 The Regents of the University of California.
# All rights reserved.
# Copyright (c) 2006 Cisco Systems, Inc. All rights reserved.
# Copyright (c) 2011 Los Alamos National Security, LLC.
# All rights reserved.
# $COPYRIGHT$
#
# Additional copyrights may follow
#
# $HEADER$
#
# This is the default system-wide MCA parameters defaults file.
# Specifically, the MCA parameter "mca_param_files" defaults to a
# value of
# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf"
# (this file is the latter of the two). So if the default value of
# mca_param_files is not changed, this file is used to set system-wide
# MCA parameters. This file can therefore be used to set system-wide
# default MCA parameters for all users. Of course, users can override
# these values if they want, but this file is an excellent location
# for setting system-specific MCA parameters for those users who don't
# know / care enough to investigate the proper values for them.
# Note that this file is only applicable where it is visible (in a
# filesystem sense). Specifically, MPI processes each read this file
# during their startup to determine what default values for MCA
# parameters should be used. mpirun does not bundle up the values in
# this file from the node where it was run and send them to all nodes;
# the default value decisions are effectively distributed. Hence,
# these values are only applicable on nodes that "see" this file. If
# $sysconf is a directory on a local disk, it is likely that changes
# to this file will need to be propagated to other nodes. If $sysconf
# is a directory that is shared via a networked filesystem, changes to
# this file will be visible to all nodes that share this $sysconf.
# The format is straightforward: one per line, mca_param_name =
# rvalue. Quoting is ignored (so if you use quotes or escape
# characters, they'll be included as part of the value). For example:
# Disable run-time MPI parameter checking
# mpi_param_check = 0
# Note that the value "~/" will be expanded to the current user's home
# directory. For example:
# Change component loading path
# component_path = /usr/local/lib/openmpi:~/my_openmpi_components
# See "ompi_info --param all all" for a full listing of Open MPI MCA
# parameters available and their default values.
#
# Basic behavior to smooth startup
mca_base_component_show_load_errors = 0
orte_abort_timeout = 10
opal_set_max_sys_limits = 1
# Define timeout for daemons to report back during launch
orte_startup_timeout = 1000
## Protect the shared file systems
orte_no_session_dirs = /panfs,/scratch,/users,/usr/projects
orte_tmpdir_base = /tmp
## Require an allocation to run - protects the frontend
## from inadvertent job executions
orte_allocation_required = 1
# Output a brief periodic report on launch progress
orte_report_launch_progress = 1
## MPI behavior
## Do NOT specify mpi_leave_pinned so system
## can figure out for itself whether or not
## it is supported and usable
notifier = syslog
## Protect looped collectives
coll_sync_priority = 100
coll_sync_barrier_before = 1000
## Activate hierarchical collectives
coll_hierarch_priority = 90
## Add the interface for out-of-band communication
## and set it up
oob_tcp_if_include=ib0
oob_tcp_peer_retries = 1000
oob_tcp_disable_family = IPv6
oob_tcp_listen_mode = listen_thread
oob_tcp_sndbuf = 32768
oob_tcp_rcvbuf = 32768
## Define the MPI interconnects
btl = sm,openib,self
## Setup OpenIB
btl_openib_want_fork_support = 0
btl_openib_cpc_include = oob
btl_openib_flags = 2
btl_openib_max_btls = 1
btl_openib_receive_queues = S,4096,1024:S,12288,512:S,65536,512
btl_openib_cq_size = 16384
## Enable cpu affinity
hwloc_base_binding_policy = core
## Setup MPI options
mpi_show_handle_leaks = 1
mpi_warn_on_fork = 1
mpi_abort_print_stack = 1

Просмотреть файл

@ -1,123 +0,0 @@
#
# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
# University Research and Technology
# Corporation. All rights reserved.
# Copyright (c) 2004-2005 The University of Tennessee and The University
# of Tennessee Research Foundation. All rights
# reserved.
# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
# University of Stuttgart. All rights reserved.
# Copyright (c) 2004-2005 The Regents of the University of California.
# All rights reserved.
# Copyright (c) 2006 Cisco Systems, Inc. All rights reserved.
# Copyright (c) 2011 Los Alamos National Security, LLC.
# All rights reserved.
# $COPYRIGHT$
#
# Additional copyrights may follow
#
# $HEADER$
#
# This is the default system-wide MCA parameters defaults file.
# Specifically, the MCA parameter "mca_param_files" defaults to a
# value of
# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf"
# (this file is the latter of the two). So if the default value of
# mca_param_files is not changed, this file is used to set system-wide
# MCA parameters. This file can therefore be used to set system-wide
# default MCA parameters for all users. Of course, users can override
# these values if they want, but this file is an excellent location
# for setting system-specific MCA parameters for those users who don't
# know / care enough to investigate the proper values for them.
# Note that this file is only applicable where it is visible (in a
# filesystem sense). Specifically, MPI processes each read this file
# during their startup to determine what default values for MCA
# parameters should be used. mpirun does not bundle up the values in
# this file from the node where it was run and send them to all nodes;
# the default value decisions are effectively distributed. Hence,
# these values are only applicable on nodes that "see" this file. If
# $sysconf is a directory on a local disk, it is likely that changes
# to this file will need to be propagated to other nodes. If $sysconf
# is a directory that is shared via a networked filesystem, changes to
# this file will be visible to all nodes that share this $sysconf.
# The format is straightforward: one per line, mca_param_name =
# rvalue. Quoting is ignored (so if you use quotes or escape
# characters, they'll be included as part of the value). For example:
# Disable run-time MPI parameter checking
# mpi_param_check = 0
# Note that the value "~/" will be expanded to the current user's home
# directory. For example:
# Change component loading path
# component_path = /usr/local/lib/openmpi:~/my_openmpi_components
# See "ompi_info --param all all" for a full listing of Open MPI MCA
# parameters available and their default values.
#
# Basic behavior to smooth startup
mca_base_component_show_load_errors = 0
orte_abort_timeout = 10
opal_set_max_sys_limits = 1
# Define timeout for daemons to report back during launch
orte_startup_timeout = 1000
## Protect the shared file systems
orte_no_session_dirs = /panfs,/scratch,/users,/usr/projects
orte_tmpdir_base = /tmp
## Require an allocation to run - protects the frontend
## from inadvertent job executions
orte_allocation_required = 1
# Output a brief periodic report on launch progress
orte_report_launch_progress = 1
## MPI behavior
## Do NOT specify mpi_leave_pinned so system
## can figure out for itself whether or not
## it is supported and usable
pml = csum
notifier = syslog
## Protect looped collectives
coll_sync_priority = 100
coll_sync_barrier_before = 1000
## Activate hierarchical collectives
coll_hierarch_priority = 90
## Add the interface for out-of-band communication
## and set it up
oob_tcp_if_include=ib0
oob_tcp_peer_retries = 1000
oob_tcp_disable_family = IPv6
oob_tcp_listen_mode = listen_thread
oob_tcp_sndbuf = 32768
oob_tcp_rcvbuf = 32768
## Define the MPI interconnects
btl = sm,openib,self
## Setup OpenIB
btl_openib_want_fork_support = 0
btl_openib_cpc_include = oob
btl_openib_flags = 2
btl_openib_max_btls = 1
btl_openib_receive_queues = S,4096,1024:S,12288,512:S,65536,512
btl_openib_cq_size = 16384
## Enable cpu affinity
hwloc_base_binding_policy = core
## Setup MPI options
mpi_show_handle_leaks = 1
mpi_warn_on_fork = 1
mpi_abort_print_stack = 1

Просмотреть файл

@ -1,36 +0,0 @@
enable_dlopen=no
enable_mem_debug=yes
enable_mem_profile=yes
enable_debug_symbols=yes
enable_binaries=yes
enable_heterogeneous=no
enable_picky=yes
enable_debug=yes
enable_shared=yes
enable_static=yes
enable_ipv6=no
enable_mpi_fortran=yes
enable_mpi_cxx=yes
enable_mpi_cxx_seek=yes
enable_cxx_exceptions=yes
enable_ft_thread=no
enable_per_user_config_files=no
enable_mca_no_build=carto,crs,routed-direct,routed-linear,snapc,pml-dr,pml-crcp2,pml-crcpw,pml-v,pml-example,crcp,pml-cm,filem
enable_contrib_no_build=libnbc,vt
with_tm=/opt/PBS
with_verbs=/opt/ofed
with_verbs_libdir=/opt/ofed/lib64
with_devel_headers=yes
with_slurm=no
with_io_romio_flags=--with-file-system=ufs+nfs+panfs
with_valgrind=no
LDFLAGS="-L/opt/PBS/lib64"
CFLAGS="-I/opt/panfs/include"
CXXFLAGS="-I/opt/panfs/include"
FCFLAGS="-I/opt/panfs/include"
FFLAGS="-I/opt/panfs/include"
CCASFLAGS="-I/opt/panfs/include"
with_memory_manager=ptmalloc2
with_openib_control_hdr_padding=yes
with_dst_checksum=yes

Просмотреть файл

@ -1,34 +0,0 @@
enable_dlopen=no
enable_mem_debug=yes
enable_mem_profile=yes
enable_debug_symbols=yes
enable_binaries=yes
enable_heterogeneous=no
enable_picky=yes
enable_debug=yes
enable_shared=yes
enable_static=yes
enable_ipv6=no
enable_mpi_fortran=yes
enable_mpi_cxx=yes
enable_mpi_cxx_seek=yes
enable_cxx_exceptions=yes
enable_ft_thread=no
enable_per_user_config_files=no
enable_mca_no_build=carto,crs,routed-direct,routed-linear,snapc,pml-csum,pml-dr,pml-crcp2,pml-crcpw,pml-v,pml-example,crcp,pml-cm,filem
enable_contrib_no_build=libnbc,vt
with_tm=/opt/PBS
with_verbs=/opt/ofed
with_verbs_libdir=/opt/ofed/lib64
with_devel_headers=yes
with_slurm=no
with_io_romio_flags=--with-file-system=ufs+nfs+panfs
with_valgrind=no
LDFLAGS="-L/opt/PBS/lib64"
CFLAGS="-I/opt/panfs/include"
CXXFLAGS="-I/opt/panfs/include"
FCFLAGS="-I/opt/panfs/include"
FFLAGS="-I/opt/panfs/include"
CCASFLAGS="-I/opt/panfs/include"
with_memory_manager=ptmalloc2

Просмотреть файл

@ -1,122 +0,0 @@
#
# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
# University Research and Technology
# Corporation. All rights reserved.
# Copyright (c) 2004-2005 The University of Tennessee and The University
# of Tennessee Research Foundation. All rights
# reserved.
# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
# University of Stuttgart. All rights reserved.
# Copyright (c) 2004-2005 The Regents of the University of California.
# All rights reserved.
# Copyright (c) 2006 Cisco Systems, Inc. All rights reserved.
# Copyright (c) 2011 Los Alamos National Security, LLC.
# All rights reserved.
# $COPYRIGHT$
#
# Additional copyrights may follow
#
# $HEADER$
#
# This is the default system-wide MCA parameters defaults file.
# Specifically, the MCA parameter "mca_param_files" defaults to a
# value of
# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf"
# (this file is the latter of the two). So if the default value of
# mca_param_files is not changed, this file is used to set system-wide
# MCA parameters. This file can therefore be used to set system-wide
# default MCA parameters for all users. Of course, users can override
# these values if they want, but this file is an excellent location
# for setting system-specific MCA parameters for those users who don't
# know / care enough to investigate the proper values for them.
# Note that this file is only applicable where it is visible (in a
# filesystem sense). Specifically, MPI processes each read this file
# during their startup to determine what default values for MCA
# parameters should be used. mpirun does not bundle up the values in
# this file from the node where it was run and send them to all nodes;
# the default value decisions are effectively distributed. Hence,
# these values are only applicable on nodes that "see" this file. If
# $sysconf is a directory on a local disk, it is likely that changes
# to this file will need to be propagated to other nodes. If $sysconf
# is a directory that is shared via a networked filesystem, changes to
# this file will be visible to all nodes that share this $sysconf.
# The format is straightforward: one per line, mca_param_name =
# rvalue. Quoting is ignored (so if you use quotes or escape
# characters, they'll be included as part of the value). For example:
# Disable run-time MPI parameter checking
# mpi_param_check = 0
# Note that the value "~/" will be expanded to the current user's home
# directory. For example:
# Change component loading path
# component_path = /usr/local/lib/openmpi:~/my_openmpi_components
# See "ompi_info --param all all" for a full listing of Open MPI MCA
# parameters available and their default values.
#
# Basic behavior to smooth startup
mca_base_component_show_load_errors = 0
orte_abort_timeout = 10
opal_set_max_sys_limits = 1
# Define timeout for daemons to report back during launch
orte_startup_timeout = 1000
## Protect the shared file systems
orte_no_session_dirs = /panfs,/scratch,/users,/usr/projects
orte_tmpdir_base = /tmp
## Require an allocation to run - protects the frontend
## from inadvertent job executions
orte_allocation_required = 1
# Output a brief periodic report on launch progress
orte_report_launch_progress = 1
## MPI behavior
## Do NOT specify mpi_leave_pinned so system
## can figure out for itself whether or not
## it is supported and usable
notifier = syslog
## Protect looped collectives
coll_sync_priority = 100
coll_sync_barrier_before = 1000
## Activate hierarchical collectives
coll_hierarch_priority = 90
## Add the interface for out-of-band communication
## and set it up
oob_tcp_if_include=ib0
oob_tcp_peer_retries = 1000
oob_tcp_disable_family = IPv6
oob_tcp_listen_mode = listen_thread
oob_tcp_sndbuf = 32768
oob_tcp_rcvbuf = 32768
## Define the MPI interconnects
btl = sm,openib,self
## Setup OpenIB
btl_openib_want_fork_support = 0
btl_openib_cpc_include = oob
btl_openib_flags = 2
btl_openib_max_btls = 1
btl_openib_receive_queues = S,4096,1024:S,12288,512:S,65536,512
btl_openib_cq_size = 16384
## Enable cpu affinity
hwloc_base_binding_policy = core
## Setup MPI options
mpi_show_handle_leaks = 1
mpi_warn_on_fork = 1
mpi_abort_print_stack = 1

Просмотреть файл

@ -1,123 +0,0 @@
#
# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
# University Research and Technology
# Corporation. All rights reserved.
# Copyright (c) 2004-2005 The University of Tennessee and The University
# of Tennessee Research Foundation. All rights
# reserved.
# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
# University of Stuttgart. All rights reserved.
# Copyright (c) 2004-2005 The Regents of the University of California.
# All rights reserved.
# Copyright (c) 2006 Cisco Systems, Inc. All rights reserved.
# Copyright (c) 2011 Los Alamos National Security, LLC.
# All rights reserved.
# $COPYRIGHT$
#
# Additional copyrights may follow
#
# $HEADER$
#
# This is the default system-wide MCA parameters defaults file.
# Specifically, the MCA parameter "mca_param_files" defaults to a
# value of
# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf"
# (this file is the latter of the two). So if the default value of
# mca_param_files is not changed, this file is used to set system-wide
# MCA parameters. This file can therefore be used to set system-wide
# default MCA parameters for all users. Of course, users can override
# these values if they want, but this file is an excellent location
# for setting system-specific MCA parameters for those users who don't
# know / care enough to investigate the proper values for them.
# Note that this file is only applicable where it is visible (in a
# filesystem sense). Specifically, MPI processes each read this file
# during their startup to determine what default values for MCA
# parameters should be used. mpirun does not bundle up the values in
# this file from the node where it was run and send them to all nodes;
# the default value decisions are effectively distributed. Hence,
# these values are only applicable on nodes that "see" this file. If
# $sysconf is a directory on a local disk, it is likely that changes
# to this file will need to be propagated to other nodes. If $sysconf
# is a directory that is shared via a networked filesystem, changes to
# this file will be visible to all nodes that share this $sysconf.
# The format is straightforward: one per line, mca_param_name =
# rvalue. Quoting is ignored (so if you use quotes or escape
# characters, they'll be included as part of the value). For example:
# Disable run-time MPI parameter checking
# mpi_param_check = 0
# Note that the value "~/" will be expanded to the current user's home
# directory. For example:
# Change component loading path
# component_path = /usr/local/lib/openmpi:~/my_openmpi_components
# See "ompi_info --param all all" for a full listing of Open MPI MCA
# parameters available and their default values.
#
# Basic behavior to smooth startup
mca_base_component_show_load_errors = 0
orte_abort_timeout = 10
opal_set_max_sys_limits = 1
# Define timeout for daemons to report back during launch
orte_startup_timeout = 1000
## Protect the shared file systems
orte_no_session_dirs = /panfs,/scratch,/users,/usr/projects
orte_tmpdir_base = /tmp
## Require an allocation to run - protects the frontend
## from inadvertent job executions
orte_allocation_required = 1
# Output a brief periodic report on launch progress
orte_report_launch_progress = 1
## MPI behavior
## Do NOT specify mpi_leave_pinned so system
## can figure out for itself whether or not
## it is supported and usable
pml = csum
notifier = syslog
## Protect looped collectives
coll_sync_priority = 100
coll_sync_barrier_before = 1000
## Activate hierarchical collectives
coll_hierarch_priority = 90
## Add the interface for out-of-band communication
## and set it up
oob_tcp_if_include=ib0
oob_tcp_peer_retries = 1000
oob_tcp_disable_family = IPv6
oob_tcp_listen_mode = listen_thread
oob_tcp_sndbuf = 32768
oob_tcp_rcvbuf = 32768
## Define the MPI interconnects
btl = sm,openib,self
## Setup OpenIB
btl_openib_want_fork_support = 0
btl_openib_cpc_include = oob
btl_openib_flags = 2
btl_openib_max_btls = 1
btl_openib_receive_queues = S,4096,1024:S,12288,512:S,65536,512
btl_openib_cq_size = 16384
## Enable cpu affinity
hwloc_base_binding_policy = core
## Setup MPI options
mpi_show_handle_leaks = 1
mpi_warn_on_fork = 1
mpi_abort_print_stack = 1

Просмотреть файл

@ -1,42 +0,0 @@
enable_dlopen=no
enable_mem_debug=no
enable_mem_profile=no
enable_debug_symbols=no
enable_binaries=yes
enable_heterogeneous=yes
enable_debug=no
enable_shared=yes
enable_static=yes
enable_memchecker=no
enable_ipv6=no
enable_mpi_fortran=yes
enable_mpi_cxx=yes
enable_mpi_cxx_seek=yes
enable_cxx_exceptions=no
enable_ft_thread=no
enable_per_user_config_files=no
enable_mca_no_build=carto,crs,routed-direct,routed-linear,snapc,pml-dr,pml-crcp2,pml-crcpw,pml-v,pml-example,crcp,pml-cm,filem,pml-csum
enable_contrib_no_build=libnbc,vt
with_tm=/opt/PBS
with_verbs=/opt/ofed
with_verbs_libdir=/opt/ofed/lib64
with_devel_headers=yes
with_slurm=no
with_io_romio_flags=--with-file-system=ufs+nfs+panfs
with_valgrind=no
LDFLAGS="-L/opt/PBS/lib64 -m64"
CFLAGS="-I/opt/panfs/include -m64"
CXXFLAGS="-I/opt/panfs/include -m64"
FCFLAGS="-I/opt/panfs/include -m64"
FFLAGS="-I/opt/panfs/include -m64"
CCASFLAGS="-I/opt/panfs/include -m64"
with_wrapper_ldflags="-m64"
with_wrapper_cflags="-m64"
with_wrapper_cxxflags="-m64"
with_wrapper_fcflags="-m64"
with_wrapper_fflags="-m64"
with_wrapper_ccasflags="-m64"
with_memory_manager=ptmalloc2
with_openib_control_hdr_padding=yes
with_dst_checksum=yes

Просмотреть файл

@ -1,111 +0,0 @@
#
# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
# University Research and Technology
# Corporation. All rights reserved.
# Copyright (c) 2004-2005 The University of Tennessee and The University
# of Tennessee Research Foundation. All rights
# reserved.
# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
# University of Stuttgart. All rights reserved.
# Copyright (c) 2004-2005 The Regents of the University of California.
# All rights reserved.
# Copyright (c) 2006 Cisco Systems, Inc. All rights reserved.
# $COPYRIGHT$
#
# Additional copyrights may follow
#
# $HEADER$
#
# This is the default system-wide MCA parameters defaults file.
# Specifically, the MCA parameter "mca_param_files" defaults to a
# value of
# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf"
# (this file is the latter of the two). So if the default value of
# mca_param_files is not changed, this file is used to set system-wide
# MCA parameters. This file can therefore be used to set system-wide
# default MCA parameters for all users. Of course, users can override
# these values if they want, but this file is an excellent location
# for setting system-specific MCA parameters for those users who don't
# know / care enough to investigate the proper values for them.
# Note that this file is only applicable where it is visible (in a
# filesystem sense). Specifically, MPI processes each read this file
# during their startup to determine what default values for MCA
# parameters should be used. mpirun does not bundle up the values in
# this file from the node where it was run and send them to all nodes;
# the default value decisions are effectively distributed. Hence,
# these values are only applicable on nodes that "see" this file. If
# $sysconf is a directory on a local disk, it is likely that changes
# to this file will need to be propagated to other nodes. If $sysconf
# is a directory that is shared via a networked filesystem, changes to
# this file will be visible to all nodes that share this $sysconf.
# The format is straightforward: one per line, mca_param_name =
# rvalue. Quoting is ignored (so if you use quotes or escape
# characters, they'll be included as part of the value). For example:
# Disable run-time MPI parameter checking
# mpi_param_check = 0
# Note that the value "~/" will be expanded to the current user's home
# directory. For example:
# Change component loading path
# component_path = /usr/local/lib/openmpi:~/my_openmpi_components
# See "ompi_info --param all all" for a full listing of Open MPI MCA
# parameters available and their default values.
#
# Basic behavior to smooth startup
mca_base_component_show_load_errors = 0
orte_abort_timeout = 10
opal_set_max_sys_limits = 1
## Protect the shared file systems
orte_no_session_dirs = /panfs,/scratch,/users,/usr/projects
orte_tmpdir_base = /tmp
## Require an allocation to run - protects the frontend
## from inadvertent job executions
orte_allocation_required = 1
## MPI behavior
## Do NOT specify mpi_leave_pinned so system
## can figure out for itself whether or not
## it is supported and usable
## Protect looped collectives
coll_sync_priority = 100
coll_sync_barrier_before = 1000
## Activate hierarchical collectives
coll_hierarch_priority = 90
## Add the interface for out-of-band communication
## and set it up
oob_tcp_if_include=ib0,eth0
oob_tcp_peer_retries = 1000
oob_tcp_disable_family = IPv6
oob_tcp_listen_mode = listen_thread
oob_tcp_sndbuf = 32768
oob_tcp_rcvbuf = 32768
## Define the MPI interconnects
btl = sm,openib,tcp,self
btl_tcp_if_include = apnet0,apnet1,apnet2,apnet3,eth0
## Setup OpenIB
btl_openib_want_fork_support = 0
btl_openib_cpc_include = oob
btl_openib_flags = 2
btl_openib_max_btls=1
## Enable cpu affinity
hwloc_base_binding_policy = core
## Setup MPI options
mpi_show_handle_leaks = 0
mpi_warn_on_fork = 1

Просмотреть файл

@ -1,31 +0,0 @@
enable_dlopen=no
enable_mem_debug=no
enable_mem_profile=no
enable_debug_symbols=no
enable_binaries=yes
enable_heterogeneous=no
enable_debug=no
enable_shared=yes
enable_static=yes
enable_memchecker=no
enable_ipv6=no
enable_mpi_fortran=yes
enable_mpi_cxx=yes
enable_mpi_cxx_seek=yes
enable_cxx_exceptions=no
enable_ft_thread=no
enable_per_user_config_files=no
enable_mca_no_build=carto,crs,routed-direct,routed-linear,snapc,pml-dr,pml-crcp2,pml-crcpw,pml-v,pml-example,crcp,pml-cm,filem
enable_contrib_no_build=libnbc,vt
with_tm=/opt/PBS
with_verbs=/opt/ofed
with_verbs_libdir=/opt/ofed/lib64
with_devel_headers=yes
with_slurm=no
with_io_romio_flags=--with-file-system=ufs+nfs
with_valgrind=no
LDFLAGS="-L/opt/PBS/lib64"
with_memory_manager=ptmalloc2
with_openib_control_hdr_padding=yes
with_dst_checksum=yes

Просмотреть файл

@ -1,29 +0,0 @@
enable_dlopen=no
enable_mem_debug=no
enable_mem_profile=no
enable_debug_symbols=no
enable_binaries=yes
enable_heterogeneous=no
enable_debug=no
enable_shared=yes
enable_static=yes
enable_memchecker=no
enable_ipv6=no
enable_mpi_fortran=yes
enable_mpi_cxx=yes
enable_mpi_cxx_seek=yes
enable_cxx_exceptions=no
enable_ft_thread=no
enable_per_user_config_files=no
enable_mca_no_build=carto,crs,routed-direct,routed-linear,snapc,pml-csum,pml-dr,pml-crcp2,pml-crcpw,pml-v,pml-example,crcp,pml-cm,filem
enable_contrib_no_build=libnbc,vt
with_tm=/opt/PBS
with_verbs=/opt/ofed
with_verbs_libdir=/opt/ofed/lib64
with_devel_headers=yes
with_slurm=no
with_io_romio_flags=--with-file-system=ufs+nfs
with_valgrind=no
LDFLAGS="-L/opt/PBS/lib64"
with_memory_manager=ptmalloc2

Просмотреть файл

@ -1,122 +0,0 @@
#
# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
# University Research and Technology
# Corporation. All rights reserved.
# Copyright (c) 2004-2005 The University of Tennessee and The University
# of Tennessee Research Foundation. All rights
# reserved.
# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
# University of Stuttgart. All rights reserved.
# Copyright (c) 2004-2005 The Regents of the University of California.
# All rights reserved.
# Copyright (c) 2006 Cisco Systems, Inc. All rights reserved.
# Copyright (c) 2011 Los Alamos National Security, LLC.
# All rights reserved.
# $COPYRIGHT$
#
# Additional copyrights may follow
#
# $HEADER$
#
# This is the default system-wide MCA parameters defaults file.
# Specifically, the MCA parameter "mca_param_files" defaults to a
# value of
# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf"
# (this file is the latter of the two). So if the default value of
# mca_param_files is not changed, this file is used to set system-wide
# MCA parameters. This file can therefore be used to set system-wide
# default MCA parameters for all users. Of course, users can override
# these values if they want, but this file is an excellent location
# for setting system-specific MCA parameters for those users who don't
# know / care enough to investigate the proper values for them.
# Note that this file is only applicable where it is visible (in a
# filesystem sense). Specifically, MPI processes each read this file
# during their startup to determine what default values for MCA
# parameters should be used. mpirun does not bundle up the values in
# this file from the node where it was run and send them to all nodes;
# the default value decisions are effectively distributed. Hence,
# these values are only applicable on nodes that "see" this file. If
# $sysconf is a directory on a local disk, it is likely that changes
# to this file will need to be propagated to other nodes. If $sysconf
# is a directory that is shared via a networked filesystem, changes to
# this file will be visible to all nodes that share this $sysconf.
# The format is straightforward: one per line, mca_param_name =
# rvalue. Quoting is ignored (so if you use quotes or escape
# characters, they'll be included as part of the value). For example:
# Disable run-time MPI parameter checking
# mpi_param_check = 0
# Note that the value "~/" will be expanded to the current user's home
# directory. For example:
# Change component loading path
# component_path = /usr/local/lib/openmpi:~/my_openmpi_components
# See "ompi_info --param all all" for a full listing of Open MPI MCA
# parameters available and their default values.
#
# Basic behavior to smooth startup
mca_base_component_show_load_errors = 0
orte_abort_timeout = 10
opal_set_max_sys_limits = 1
# Define timeout for daemons to report back during launch
orte_startup_timeout = 1000
## Protect the shared file systems
orte_no_session_dirs = /panfs,/scratch,/users,/usr/projects
orte_tmpdir_base = /tmp
## Require an allocation to run - protects the frontend
## from inadvertent job executions
orte_allocation_required = 1
# Output a brief periodic report on launch progress
orte_report_launch_progress = 1
## MPI behavior
## Do NOT specify mpi_leave_pinned so system
## can figure out for itself whether or not
## it is supported and usable
notifier = syslog
## Protect looped collectives
coll_sync_priority = 100
coll_sync_barrier_before = 1000
## Activate hierarchical collectives
coll_hierarch_priority = 90
## Add the interface for out-of-band communication
## and set it up
oob_tcp_if_include=ib0
oob_tcp_peer_retries = 1000
oob_tcp_disable_family = IPv6
oob_tcp_listen_mode = listen_thread
oob_tcp_sndbuf = 32768
oob_tcp_rcvbuf = 32768
## Define the MPI interconnects
btl = sm,openib,self
## Setup OpenIB
btl_openib_want_fork_support = 0
btl_openib_cpc_include = oob
btl_openib_flags = 2
btl_openib_max_btls = 1
btl_openib_receive_queues = S,4096,1024:S,12288,512:S,65536,512
btl_openib_cq_size = 16384
## Enable cpu affinity
hwloc_base_binding_policy = core
## Setup MPI options
mpi_show_handle_leaks = 0
mpi_warn_on_fork = 1

Просмотреть файл

@ -1,122 +0,0 @@
#
# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
# University Research and Technology
# Corporation. All rights reserved.
# Copyright (c) 2004-2005 The University of Tennessee and The University
# of Tennessee Research Foundation. All rights
# reserved.
# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
# University of Stuttgart. All rights reserved.
# Copyright (c) 2004-2005 The Regents of the University of California.
# All rights reserved.
# Copyright (c) 2006 Cisco Systems, Inc. All rights reserved.
# Copyright (c) 2011 Los Alamos National Security, LLC.
# All rights reserved.
# $COPYRIGHT$
#
# Additional copyrights may follow
#
# $HEADER$
#
# This is the default system-wide MCA parameters defaults file.
# Specifically, the MCA parameter "mca_param_files" defaults to a
# value of
# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf"
# (this file is the latter of the two). So if the default value of
# mca_param_files is not changed, this file is used to set system-wide
# MCA parameters. This file can therefore be used to set system-wide
# default MCA parameters for all users. Of course, users can override
# these values if they want, but this file is an excellent location
# for setting system-specific MCA parameters for those users who don't
# know / care enough to investigate the proper values for them.
# Note that this file is only applicable where it is visible (in a
# filesystem sense). Specifically, MPI processes each read this file
# during their startup to determine what default values for MCA
# parameters should be used. mpirun does not bundle up the values in
# this file from the node where it was run and send them to all nodes;
# the default value decisions are effectively distributed. Hence,
# these values are only applicable on nodes that "see" this file. If
# $sysconf is a directory on a local disk, it is likely that changes
# to this file will need to be propagated to other nodes. If $sysconf
# is a directory that is shared via a networked filesystem, changes to
# this file will be visible to all nodes that share this $sysconf.
# The format is straightforward: one per line, mca_param_name =
# rvalue. Quoting is ignored (so if you use quotes or escape
# characters, they'll be included as part of the value). For example:
# Disable run-time MPI parameter checking
# mpi_param_check = 0
# Note that the value "~/" will be expanded to the current user's home
# directory. For example:
# Change component loading path
# component_path = /usr/local/lib/openmpi:~/my_openmpi_components
# See "ompi_info --param all all" for a full listing of Open MPI MCA
# parameters available and their default values.
#
# Basic behavior to smooth startup
mca_base_component_show_load_errors = 0
orte_abort_timeout = 10
opal_set_max_sys_limits = 1
# Define timeout for daemons to report back during launch
orte_startup_timeout = 1000
## Protect the shared file systems
orte_no_session_dirs = /panfs,/scratch,/users,/usr/projects
orte_tmpdir_base = /tmp
## Require an allocation to run - protects the frontend
## from inadvertent job executions
orte_allocation_required = 1
# Output a brief periodic report on launch progress
orte_report_launch_progress = 1
## MPI behavior
## Do NOT specify mpi_leave_pinned so system
## can figure out for itself whether or not
## it is supported and usable
pml = csum
notifier = syslog
## Protect looped collectives
coll_sync_priority = 100
coll_sync_barrier_before = 1000
## Activate hierarchical collectives
coll_hierarch_priority = 90
## Add the interface for out-of-band communication
## and set it up
oob_tcp_if_include=ib0
oob_tcp_peer_retries = 1000
oob_tcp_disable_family = IPv6
oob_tcp_listen_mode = listen_thread
oob_tcp_sndbuf = 32768
oob_tcp_rcvbuf = 32768
## Define the MPI interconnects
btl = sm,openib,self
## Setup OpenIB
btl_openib_want_fork_support = 0
btl_openib_cpc_include = oob
btl_openib_flags = 2
btl_openib_max_btls = 1
btl_openib_receive_queues = S,4096,1024:S,12288,512:S,65536,512
btl_openib_cq_size = 16384
## Enable cpu affinity
hwloc_base_binding_policy = core
## Setup MPI options
mpi_show_handle_leaks = 0
mpi_warn_on_fork = 1

Просмотреть файл

@ -1,36 +0,0 @@
enable_dlopen=no
enable_mem_debug=no
enable_mem_profile=no
enable_debug_symbols=no
enable_binaries=yes
enable_heterogeneous=no
enable_debug=no
enable_shared=yes
enable_static=yes
enable_memchecker=no
enable_ipv6=no
enable_mpi_fortran=yes
enable_mpi_cxx=yes
enable_mpi_cxx_seek=yes
enable_cxx_exceptions=no
enable_ft_thread=no
enable_per_user_config_files=no
enable_mca_no_build=carto,crs,routed-direct,routed-linear,snapc,pml-dr,pml-crcp2,pml-crcpw,pml-v,pml-example,crcp,pml-cm,filem
enable_contrib_no_build=libnbc,vt
with_tm=/opt/PBS
with_verbs=/opt/ofed
with_verbs_libdir=/opt/ofed/lib64
with_devel_headers=yes
with_slurm=no
with_io_romio_flags=--with-file-system=ufs+nfs+panfs
with_valgrind=no
LDFLAGS="-L/opt/PBS/lib64"
CFLAGS="-I/opt/panfs/include"
CXXFLAGS="-I/opt/panfs/include"
FCFLAGS="-I/opt/panfs/include"
FFLAGS="-I/opt/panfs/include"
CCASFLAGS="-I/opt/panfs/include"
with_memory_manager=ptmalloc2
with_openib_control_hdr_padding=yes
with_dst_checksum=yes

Просмотреть файл

@ -1,34 +0,0 @@
enable_dlopen=no
enable_mem_debug=no
enable_mem_profile=no
enable_debug_symbols=no
enable_binaries=yes
enable_heterogeneous=no
enable_debug=no
enable_shared=yes
enable_static=yes
enable_memchecker=no
enable_ipv6=no
enable_mpi_fortran=yes
enable_mpi_cxx=yes
enable_mpi_cxx_seek=yes
enable_cxx_exceptions=no
enable_ft_thread=no
enable_per_user_config_files=no
enable_mca_no_build=carto,crs,routed-direct,routed-linear,snapc,pml-csum,pml-dr,pml-crcp2,pml-crcpw,pml-v,pml-example,crcp,pml-cm,filem
enable_contrib_no_build=libnbc,vt
with_tm=/opt/PBS
with_verbs=/opt/ofed
with_verbs_libdir=/opt/ofed/lib64
with_devel_headers=yes
with_slurm=no
with_io_romio_flags=--with-file-system=ufs+nfs+panfs
with_valgrind=no
LDFLAGS="-L/opt/PBS/lib64"
CFLAGS="-I/opt/panfs/include"
CXXFLAGS="-I/opt/panfs/include"
FCFLAGS="-I/opt/panfs/include"
FFLAGS="-I/opt/panfs/include"
CCASFLAGS="-I/opt/panfs/include"
with_memory_manager=ptmalloc2

Просмотреть файл

@ -1,122 +0,0 @@
#
# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
# University Research and Technology
# Corporation. All rights reserved.
# Copyright (c) 2004-2005 The University of Tennessee and The University
# of Tennessee Research Foundation. All rights
# reserved.
# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
# University of Stuttgart. All rights reserved.
# Copyright (c) 2004-2005 The Regents of the University of California.
# All rights reserved.
# Copyright (c) 2006 Cisco Systems, Inc. All rights reserved.
# Copyright (c) 2011 Los Alamos National Security, LLC.
# All rights reserved.
# $COPYRIGHT$
#
# Additional copyrights may follow
#
# $HEADER$
#
# This is the default system-wide MCA parameters defaults file.
# Specifically, the MCA parameter "mca_param_files" defaults to a
# value of
# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf"
# (this file is the latter of the two). So if the default value of
# mca_param_files is not changed, this file is used to set system-wide
# MCA parameters. This file can therefore be used to set system-wide
# default MCA parameters for all users. Of course, users can override
# these values if they want, but this file is an excellent location
# for setting system-specific MCA parameters for those users who don't
# know / care enough to investigate the proper values for them.
# Note that this file is only applicable where it is visible (in a
# filesystem sense). Specifically, MPI processes each read this file
# during their startup to determine what default values for MCA
# parameters should be used. mpirun does not bundle up the values in
# this file from the node where it was run and send them to all nodes;
# the default value decisions are effectively distributed. Hence,
# these values are only applicable on nodes that "see" this file. If
# $sysconf is a directory on a local disk, it is likely that changes
# to this file will need to be propagated to other nodes. If $sysconf
# is a directory that is shared via a networked filesystem, changes to
# this file will be visible to all nodes that share this $sysconf.
# The format is straightforward: one per line, mca_param_name =
# rvalue. Quoting is ignored (so if you use quotes or escape
# characters, they'll be included as part of the value). For example:
# Disable run-time MPI parameter checking
# mpi_param_check = 0
# Note that the value "~/" will be expanded to the current user's home
# directory. For example:
# Change component loading path
# component_path = /usr/local/lib/openmpi:~/my_openmpi_components
# See "ompi_info --param all all" for a full listing of Open MPI MCA
# parameters available and their default values.
#
# Basic behavior to smooth startup
mca_base_component_show_load_errors = 0
orte_abort_timeout = 10
opal_set_max_sys_limits = 1
# Define timeout for daemons to report back during launch
orte_startup_timeout = 1000
## Protect the shared file systems
orte_no_session_dirs = /panfs,/scratch,/users,/usr/projects
orte_tmpdir_base = /tmp
## Require an allocation to run - protects the frontend
## from inadvertent job executions
orte_allocation_required = 1
# Output a brief periodic report on launch progress
orte_report_launch_progress = 1
## MPI behavior
## Do NOT specify mpi_leave_pinned so system
## can figure out for itself whether or not
## it is supported and usable
notifier = syslog
## Protect looped collectives
coll_sync_priority = 100
coll_sync_barrier_before = 1000
## Activate hierarchical collectives
coll_hierarch_priority = 90
## Add the interface for out-of-band communication
## and set it up
oob_tcp_if_include=ib0
oob_tcp_peer_retries = 1000
oob_tcp_disable_family = IPv6
oob_tcp_listen_mode = listen_thread
oob_tcp_sndbuf = 32768
oob_tcp_rcvbuf = 32768
## Define the MPI interconnects
btl = sm,openib,self
## Setup OpenIB
btl_openib_want_fork_support = 0
btl_openib_cpc_include = oob
btl_openib_flags = 2
btl_openib_max_btls = 1
btl_openib_receive_queues = S,4096,1024:S,12288,512:S,65536,512
btl_openib_cq_size = 16384
## Enable cpu affinity
hwloc_base_binding_policy = core
## Setup MPI options
mpi_show_handle_leaks = 0
mpi_warn_on_fork = 1

Просмотреть файл

@ -1,122 +0,0 @@
#
# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
# University Research and Technology
# Corporation. All rights reserved.
# Copyright (c) 2004-2005 The University of Tennessee and The University
# of Tennessee Research Foundation. All rights
# reserved.
# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
# University of Stuttgart. All rights reserved.
# Copyright (c) 2004-2005 The Regents of the University of California.
# All rights reserved.
# Copyright (c) 2006 Cisco Systems, Inc. All rights reserved.
# Copyright (c) 2011 Los Alamos National Security, LLC.
# All rights reserved.
# $COPYRIGHT$
#
# Additional copyrights may follow
#
# $HEADER$
#
# This is the default system-wide MCA parameters defaults file.
# Specifically, the MCA parameter "mca_param_files" defaults to a
# value of
# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf"
# (this file is the latter of the two). So if the default value of
# mca_param_files is not changed, this file is used to set system-wide
# MCA parameters. This file can therefore be used to set system-wide
# default MCA parameters for all users. Of course, users can override
# these values if they want, but this file is an excellent location
# for setting system-specific MCA parameters for those users who don't
# know / care enough to investigate the proper values for them.
# Note that this file is only applicable where it is visible (in a
# filesystem sense). Specifically, MPI processes each read this file
# during their startup to determine what default values for MCA
# parameters should be used. mpirun does not bundle up the values in
# this file from the node where it was run and send them to all nodes;
# the default value decisions are effectively distributed. Hence,
# these values are only applicable on nodes that "see" this file. If
# $sysconf is a directory on a local disk, it is likely that changes
# to this file will need to be propagated to other nodes. If $sysconf
# is a directory that is shared via a networked filesystem, changes to
# this file will be visible to all nodes that share this $sysconf.
# The format is straightforward: one per line, mca_param_name =
# rvalue. Quoting is ignored (so if you use quotes or escape
# characters, they'll be included as part of the value). For example:
# Disable run-time MPI parameter checking
# mpi_param_check = 0
# Note that the value "~/" will be expanded to the current user's home
# directory. For example:
# Change component loading path
# component_path = /usr/local/lib/openmpi:~/my_openmpi_components
# See "ompi_info --param all all" for a full listing of Open MPI MCA
# parameters available and their default values.
#
# Basic behavior to smooth startup
mca_base_component_show_load_errors = 0
orte_abort_timeout = 10
opal_set_max_sys_limits = 1
# Define timeout for daemons to report back during launch
orte_startup_timeout = 1000
## Protect the shared file systems
orte_no_session_dirs = /panfs,/scratch,/users,/usr/projects
orte_tmpdir_base = /tmp
## Require an allocation to run - protects the frontend
## from inadvertent job executions
orte_allocation_required = 1
# Output a brief periodic report on launch progress
orte_report_launch_progress = 1
## MPI behavior
## Do NOT specify mpi_leave_pinned so system
## can figure out for itself whether or not
## it is supported and usable
pml = csum
notifier = syslog
## Protect looped collectives
coll_sync_priority = 100
coll_sync_barrier_before = 1000
## Activate hierarchical collectives
coll_hierarch_priority = 90
## Add the interface for out-of-band communication
## and set it up
oob_tcp_if_include=ib0
oob_tcp_peer_retries = 1000
oob_tcp_disable_family = IPv6
oob_tcp_listen_mode = listen_thread
oob_tcp_sndbuf = 32768
oob_tcp_rcvbuf = 32768
## Define the MPI interconnects
btl = sm,openib,self
## Setup OpenIB
btl_openib_want_fork_support = 0
btl_openib_cpc_include = oob
btl_openib_flags = 2
btl_openib_max_btls = 1
btl_openib_receive_queues = S,4096,1024:S,12288,512:S,65536,512
btl_openib_cq_size = 16384
## Enable cpu affinity
hwloc_base_binding_policy = core
## Setup MPI options
mpi_show_handle_leaks = 0
mpi_warn_on_fork = 1

Просмотреть файл

@ -62,7 +62,6 @@
# Basic behavior to smooth startup
mca_base_component_show_load_errors = 0
orte_abort_timeout = 10
opal_set_max_sys_limits = 1
orte_report_launch_progress = 1

Просмотреть файл

@ -62,7 +62,6 @@
# Basic behavior to smooth startup
mca_base_component_show_load_errors = 0
orte_abort_timeout = 10
opal_set_max_sys_limits = 1
orte_report_launch_progress = 1