1
1
openmpi/opal/mca/allocator/bucket/allocator_bucket.c

148 строки
4.9 KiB
C
Исходник Обычный вид История

/* -*- Mode: C; c-basic-offset:4 ; indent-tabs-mode:nil -*- */
/*
* Copyright (c) 2004-2007 The Trustees of Indiana University and Indiana
* University Research and Technology
* Corporation. All rights reserved.
* Copyright (c) 2004-2005 The University of Tennessee and The University
* of Tennessee Research Foundation. All rights
* reserved.
* Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
* University of Stuttgart. All rights reserved.
* Copyright (c) 2004-2005 The Regents of the University of California.
* All rights reserved.
* Copyright (c) 2008 Cisco Systems, Inc. All rights reserved.
* Copyright (c) 2014 Los Alamos National Security, LLC. All rights
* reseved.
* $COPYRIGHT$
*
* Additional copyrights may follow
*
* $HEADER$
*/
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 00:47:28 +00:00
#include "opal_config.h"
#include "opal/mca/allocator/allocator.h"
#include "opal/constants.h"
#include "opal/mca/allocator/bucket/allocator_bucket_alloc.h"
#include "opal/mca/mpool/mpool.h"
- massive change for module<-->component name fixes throughout the code base. - many (most) mca type names have "component" or "module" in them, as relevant, just to further distinguish the difference between component data/actions and module data/actions. All developers are encouraged to perpetuate this convention when you create types that are specific to a framework, component, or module - did very little to entire framework (just the basics to make it compile) because it's just about to be almost entirely replaced - ditto for io / romio - did not work on elan or ib components; have to commit and then convert those on a different machine with the right libraries and headers - renamed a bunch of *_module.c files to *_component.c and *module*c to *component*c (a few still remain, e.g., ptl/ib, ptl/elan, etc.) - modified autogen/configure/build process to match new filenames (e.g., output static-components.h instead of static-modules.h) - removed DOS-style cr/lf stuff in ns/ns.h - added newline to end of file src/util/numtostr.h - removed some redundant error checking in the top-level topo functions - added a few {} here and there where people "forgot" to put them in for 1 line blocks ;-) - removed a bunch of MPI_* types from mca header files (replaced with corresponding ompi_* types) - all the ptl components had version numbers in their structs; removed - converted a few more elements in the MCA base to use the OBJ interface -- removed some old manual reference counting kruft This commit was SVN r1830.
2004-08-02 00:24:22 +00:00
struct mca_allocator_base_module_t* mca_allocator_bucket_module_init(
bool enable_mpi_threads,
- massive change for module<-->component name fixes throughout the code base. - many (most) mca type names have "component" or "module" in them, as relevant, just to further distinguish the difference between component data/actions and module data/actions. All developers are encouraged to perpetuate this convention when you create types that are specific to a framework, component, or module - did very little to entire framework (just the basics to make it compile) because it's just about to be almost entirely replaced - ditto for io / romio - did not work on elan or ib components; have to commit and then convert those on a different machine with the right libraries and headers - renamed a bunch of *_module.c files to *_component.c and *module*c to *component*c (a few still remain, e.g., ptl/ib, ptl/elan, etc.) - modified autogen/configure/build process to match new filenames (e.g., output static-components.h instead of static-modules.h) - removed DOS-style cr/lf stuff in ns/ns.h - added newline to end of file src/util/numtostr.h - removed some redundant error checking in the top-level topo functions - added a few {} here and there where people "forgot" to put them in for 1 line blocks ;-) - removed a bunch of MPI_* types from mca header files (replaced with corresponding ompi_* types) - all the ptl components had version numbers in their structs; removed - converted a few more elements in the MCA base to use the OBJ interface -- removed some old manual reference counting kruft This commit was SVN r1830.
2004-08-02 00:24:22 +00:00
mca_allocator_base_component_segment_alloc_fn_t segment_alloc,
mca_allocator_base_component_segment_free_fn_t segment_free,
struct mca_mpool_base_module_t* mpool
);
int mca_allocator_bucket_module_open(void);
int mca_allocator_bucket_module_close(void);
void * mca_allocator_bucket_alloc_wrapper(
struct mca_allocator_base_module_t* allocator,
size_t size, size_t align,
mca_mpool_base_registration_t** registration);
static int mca_allocator_num_buckets;
- massive change for module<-->component name fixes throughout the code base. - many (most) mca type names have "component" or "module" in them, as relevant, just to further distinguish the difference between component data/actions and module data/actions. All developers are encouraged to perpetuate this convention when you create types that are specific to a framework, component, or module - did very little to entire framework (just the basics to make it compile) because it's just about to be almost entirely replaced - ditto for io / romio - did not work on elan or ib components; have to commit and then convert those on a different machine with the right libraries and headers - renamed a bunch of *_module.c files to *_component.c and *module*c to *component*c (a few still remain, e.g., ptl/ib, ptl/elan, etc.) - modified autogen/configure/build process to match new filenames (e.g., output static-components.h instead of static-modules.h) - removed DOS-style cr/lf stuff in ns/ns.h - added newline to end of file src/util/numtostr.h - removed some redundant error checking in the top-level topo functions - added a few {} here and there where people "forgot" to put them in for 1 line blocks ;-) - removed a bunch of MPI_* types from mca header files (replaced with corresponding ompi_* types) - all the ptl components had version numbers in their structs; removed - converted a few more elements in the MCA base to use the OBJ interface -- removed some old manual reference counting kruft This commit was SVN r1830.
2004-08-02 00:24:22 +00:00
int mca_allocator_bucket_finalize(struct mca_allocator_base_module_t* allocator)
{
mca_allocator_bucket_t *bucket = (mca_allocator_bucket_t *) allocator;
mca_allocator_bucket_cleanup(allocator);
for (int i = 0 ; i < bucket->num_buckets ; ++i) {
OBJ_DESTRUCT(&bucket->buckets[i].lock);
}
free (bucket->buckets);
free(allocator);
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 00:47:28 +00:00
return(OPAL_SUCCESS);
}
- massive change for module<-->component name fixes throughout the code base. - many (most) mca type names have "component" or "module" in them, as relevant, just to further distinguish the difference between component data/actions and module data/actions. All developers are encouraged to perpetuate this convention when you create types that are specific to a framework, component, or module - did very little to entire framework (just the basics to make it compile) because it's just about to be almost entirely replaced - ditto for io / romio - did not work on elan or ib components; have to commit and then convert those on a different machine with the right libraries and headers - renamed a bunch of *_module.c files to *_component.c and *module*c to *component*c (a few still remain, e.g., ptl/ib, ptl/elan, etc.) - modified autogen/configure/build process to match new filenames (e.g., output static-components.h instead of static-modules.h) - removed DOS-style cr/lf stuff in ns/ns.h - added newline to end of file src/util/numtostr.h - removed some redundant error checking in the top-level topo functions - added a few {} here and there where people "forgot" to put them in for 1 line blocks ;-) - removed a bunch of MPI_* types from mca header files (replaced with corresponding ompi_* types) - all the ptl components had version numbers in their structs; removed - converted a few more elements in the MCA base to use the OBJ interface -- removed some old manual reference counting kruft This commit was SVN r1830.
2004-08-02 00:24:22 +00:00
struct mca_allocator_base_module_t* mca_allocator_bucket_module_init(
bool enable_mpi_threads,
- massive change for module<-->component name fixes throughout the code base. - many (most) mca type names have "component" or "module" in them, as relevant, just to further distinguish the difference between component data/actions and module data/actions. All developers are encouraged to perpetuate this convention when you create types that are specific to a framework, component, or module - did very little to entire framework (just the basics to make it compile) because it's just about to be almost entirely replaced - ditto for io / romio - did not work on elan or ib components; have to commit and then convert those on a different machine with the right libraries and headers - renamed a bunch of *_module.c files to *_component.c and *module*c to *component*c (a few still remain, e.g., ptl/ib, ptl/elan, etc.) - modified autogen/configure/build process to match new filenames (e.g., output static-components.h instead of static-modules.h) - removed DOS-style cr/lf stuff in ns/ns.h - added newline to end of file src/util/numtostr.h - removed some redundant error checking in the top-level topo functions - added a few {} here and there where people "forgot" to put them in for 1 line blocks ;-) - removed a bunch of MPI_* types from mca header files (replaced with corresponding ompi_* types) - all the ptl components had version numbers in their structs; removed - converted a few more elements in the MCA base to use the OBJ interface -- removed some old manual reference counting kruft This commit was SVN r1830.
2004-08-02 00:24:22 +00:00
mca_allocator_base_component_segment_alloc_fn_t segment_alloc,
mca_allocator_base_component_segment_free_fn_t segment_free,
struct mca_mpool_base_module_t* mpool)
{
size_t alloc_size = sizeof(mca_allocator_bucket_t);
mca_allocator_bucket_t * retval;
mca_allocator_bucket_t * allocator = (mca_allocator_bucket_t *) malloc(alloc_size);
if(NULL == allocator) {
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 00:47:28 +00:00
return NULL;
}
retval = mca_allocator_bucket_init((mca_allocator_base_module_t *) allocator,
mca_allocator_num_buckets,
segment_alloc,
segment_free);
if(NULL == retval) {
free(allocator);
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 00:47:28 +00:00
return NULL;
}
allocator->super.alc_alloc = mca_allocator_bucket_alloc_wrapper;
allocator->super.alc_realloc = mca_allocator_bucket_realloc;
allocator->super.alc_free = mca_allocator_bucket_free;
allocator->super.alc_compact = mca_allocator_bucket_cleanup;
allocator->super.alc_finalize = mca_allocator_bucket_finalize;
allocator->super.alc_mpool = mpool;
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 00:47:28 +00:00
return (mca_allocator_base_module_t *) allocator;
}
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-27 21:09:41 +00:00
static int mca_allocator_bucket_module_register(void) {
mca_allocator_num_buckets = 30;
(void) mca_base_component_var_register(&mca_allocator_bucket_component.allocator_version,
"num_buckets", NULL, MCA_BASE_VAR_TYPE_INT, NULL, 0,
MCA_BASE_VAR_FLAG_SETTABLE, OPAL_INFO_LVL_9,
MCA_BASE_VAR_SCOPE_LOCAL, &mca_allocator_num_buckets);
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 00:47:28 +00:00
return OPAL_SUCCESS;
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-27 21:09:41 +00:00
}
int mca_allocator_bucket_module_open(void) {
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 00:47:28 +00:00
return OPAL_SUCCESS;
}
int mca_allocator_bucket_module_close(void) {
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 00:47:28 +00:00
return OPAL_SUCCESS;
}
void * mca_allocator_bucket_alloc_wrapper(
struct mca_allocator_base_module_t* allocator,
size_t size,
size_t align,
mca_mpool_base_registration_t** registration)
{
if(0 == align){
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 00:47:28 +00:00
return mca_allocator_bucket_alloc(allocator, size, registration);
}
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 00:47:28 +00:00
return mca_allocator_bucket_alloc_align(allocator, size, align, registration);
}
- massive change for module<-->component name fixes throughout the code base. - many (most) mca type names have "component" or "module" in them, as relevant, just to further distinguish the difference between component data/actions and module data/actions. All developers are encouraged to perpetuate this convention when you create types that are specific to a framework, component, or module - did very little to entire framework (just the basics to make it compile) because it's just about to be almost entirely replaced - ditto for io / romio - did not work on elan or ib components; have to commit and then convert those on a different machine with the right libraries and headers - renamed a bunch of *_module.c files to *_component.c and *module*c to *component*c (a few still remain, e.g., ptl/ib, ptl/elan, etc.) - modified autogen/configure/build process to match new filenames (e.g., output static-components.h instead of static-modules.h) - removed DOS-style cr/lf stuff in ns/ns.h - added newline to end of file src/util/numtostr.h - removed some redundant error checking in the top-level topo functions - added a few {} here and there where people "forgot" to put them in for 1 line blocks ;-) - removed a bunch of MPI_* types from mca header files (replaced with corresponding ompi_* types) - all the ptl components had version numbers in their structs; removed - converted a few more elements in the MCA base to use the OBJ interface -- removed some old manual reference counting kruft This commit was SVN r1830.
2004-08-02 00:24:22 +00:00
mca_allocator_base_component_t mca_allocator_bucket_component = {
/* First, the mca_base_module_t struct containing meta information
about the module itself */
{
MCA_ALLOCATOR_BASE_VERSION_2_0_0,
"bucket", /* MCA module name */
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 00:47:28 +00:00
OPAL_MAJOR_VERSION,
OPAL_MINOR_VERSION,
OPAL_RELEASE_VERSION,
mca_allocator_bucket_module_open, /* module open */
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-27 21:09:41 +00:00
mca_allocator_bucket_module_close, /* module close */
NULL,
mca_allocator_bucket_module_register
- massive change for module<-->component name fixes throughout the code base. - many (most) mca type names have "component" or "module" in them, as relevant, just to further distinguish the difference between component data/actions and module data/actions. All developers are encouraged to perpetuate this convention when you create types that are specific to a framework, component, or module - did very little to entire framework (just the basics to make it compile) because it's just about to be almost entirely replaced - ditto for io / romio - did not work on elan or ib components; have to commit and then convert those on a different machine with the right libraries and headers - renamed a bunch of *_module.c files to *_component.c and *module*c to *component*c (a few still remain, e.g., ptl/ib, ptl/elan, etc.) - modified autogen/configure/build process to match new filenames (e.g., output static-components.h instead of static-modules.h) - removed DOS-style cr/lf stuff in ns/ns.h - added newline to end of file src/util/numtostr.h - removed some redundant error checking in the top-level topo functions - added a few {} here and there where people "forgot" to put them in for 1 line blocks ;-) - removed a bunch of MPI_* types from mca header files (replaced with corresponding ompi_* types) - all the ptl components had version numbers in their structs; removed - converted a few more elements in the MCA base to use the OBJ interface -- removed some old manual reference counting kruft This commit was SVN r1830.
2004-08-02 00:24:22 +00:00
},
{
/* The component is checkpoint ready */
MCA_BASE_METADATA_PARAM_CHECKPOINT
- massive change for module<-->component name fixes throughout the code base. - many (most) mca type names have "component" or "module" in them, as relevant, just to further distinguish the difference between component data/actions and module data/actions. All developers are encouraged to perpetuate this convention when you create types that are specific to a framework, component, or module - did very little to entire framework (just the basics to make it compile) because it's just about to be almost entirely replaced - ditto for io / romio - did not work on elan or ib components; have to commit and then convert those on a different machine with the right libraries and headers - renamed a bunch of *_module.c files to *_component.c and *module*c to *component*c (a few still remain, e.g., ptl/ib, ptl/elan, etc.) - modified autogen/configure/build process to match new filenames (e.g., output static-components.h instead of static-modules.h) - removed DOS-style cr/lf stuff in ns/ns.h - added newline to end of file src/util/numtostr.h - removed some redundant error checking in the top-level topo functions - added a few {} here and there where people "forgot" to put them in for 1 line blocks ;-) - removed a bunch of MPI_* types from mca header files (replaced with corresponding ompi_* types) - all the ptl components had version numbers in their structs; removed - converted a few more elements in the MCA base to use the OBJ interface -- removed some old manual reference counting kruft This commit was SVN r1830.
2004-08-02 00:24:22 +00:00
},
mca_allocator_bucket_module_init
};