Bring over all the work from the /tmp/ib-hw-detect branch. In
addition to my design and testing, it was conceptually approved by
Gil, Gleb, Pasha, Brad, and Galen. Functionally [probably somewhat
lightly] tested by Galen. We may still have to shake out some bugs
during the next few months, but it seems to be working for all the
cases that I can throw at it.
Here's a summary of the changes from that branch:
* Move MCA parameter registration to a new file (btl_openib_mca.c):
* Properly check the retun status of registering MCA params
* Check for valid values of MCA parameters
* Make help strings better
* Otherwise, the only default value of an MCA param that was
changed was max_btls; it went from 4 to -1 (meaning: use all
available)
* Properly prototyped internal functions in _component.c
* Made a bunch of functions static that didn't need to be public
* Renamed to remove "mca_" prefix from static functions
* Call new MCA param registration function
* Call new INI file read/lookup/finalize functions
* Updated a bunch of macros to be "BTL_" instead of "ORTE_"
* Be a little more consistent with return values
* Handle -1 for the max_btls MCA param
* Fixed a free() that should have been an OBJ_RELEASE()
* Some re-indenting
* Added INI-file parsing
* New flex file: btl_openib_ini.l
* New default HCA params .ini file (probably to be expanded over
time by other HCA vendors)
* Added more show_help messages for parsing problems
* Read in INI files and cache the values for later lookup
* When component opens an HCA, lookup to see if any corresponding
values were found in the INI files (ID'ed by the HCA vendor_id
and vendor_part_id)
* Added btl_openib_verbose MCA param that shows what the INI-file
stuff does (e.g., shows which MTU your HCA ends up using)
* Added btl_openib_hca_param_files as a colon-delimited list of INI
files to check for values during startup (in order,
left-to-right, just like the MCA base directory param).
* MTU is currently the only value supported in this framework.
* It is not a fatal error if we don't find params for the HCA in
the INI file(s). Instead, just print a warning. New MCA param
btl_openib_warn_no_hca_params_found can be used to disable
printing the warning.
* Add MTU to peer negotiation when making a connection
* Exchange maximum MTU; select the lesser of the two
This commit was SVN r11182.
2006-08-14 23:30:37 +04:00
|
|
|
#
|
|
|
|
|
# Copyright (c) 2006 Cisco Systems, Inc. All rights reserved.
|
2007-02-15 21:03:20 +03:00
|
|
|
# Copyright (c) 2006-2007 Mellanox Technologies. All rights reserved.
|
Bring over all the work from the /tmp/ib-hw-detect branch. In
addition to my design and testing, it was conceptually approved by
Gil, Gleb, Pasha, Brad, and Galen. Functionally [probably somewhat
lightly] tested by Galen. We may still have to shake out some bugs
during the next few months, but it seems to be working for all the
cases that I can throw at it.
Here's a summary of the changes from that branch:
* Move MCA parameter registration to a new file (btl_openib_mca.c):
* Properly check the retun status of registering MCA params
* Check for valid values of MCA parameters
* Make help strings better
* Otherwise, the only default value of an MCA param that was
changed was max_btls; it went from 4 to -1 (meaning: use all
available)
* Properly prototyped internal functions in _component.c
* Made a bunch of functions static that didn't need to be public
* Renamed to remove "mca_" prefix from static functions
* Call new MCA param registration function
* Call new INI file read/lookup/finalize functions
* Updated a bunch of macros to be "BTL_" instead of "ORTE_"
* Be a little more consistent with return values
* Handle -1 for the max_btls MCA param
* Fixed a free() that should have been an OBJ_RELEASE()
* Some re-indenting
* Added INI-file parsing
* New flex file: btl_openib_ini.l
* New default HCA params .ini file (probably to be expanded over
time by other HCA vendors)
* Added more show_help messages for parsing problems
* Read in INI files and cache the values for later lookup
* When component opens an HCA, lookup to see if any corresponding
values were found in the INI files (ID'ed by the HCA vendor_id
and vendor_part_id)
* Added btl_openib_verbose MCA param that shows what the INI-file
stuff does (e.g., shows which MTU your HCA ends up using)
* Added btl_openib_hca_param_files as a colon-delimited list of INI
files to check for values during startup (in order,
left-to-right, just like the MCA base directory param).
* MTU is currently the only value supported in this framework.
* It is not a fatal error if we don't find params for the HCA in
the INI file(s). Instead, just print a warning. New MCA param
btl_openib_warn_no_hca_params_found can be used to disable
printing the warning.
* Add MTU to peer negotiation when making a connection
* Exchange maximum MTU; select the lesser of the two
This commit was SVN r11182.
2006-08-14 23:30:37 +04:00
|
|
|
# $COPYRIGHT$
|
|
|
|
|
#
|
|
|
|
|
# Additional copyrights may follow
|
|
|
|
|
#
|
|
|
|
|
|
|
|
|
|
# This is the default HCA parameters file for Open MPI's OpenIB BTL.
|
|
|
|
|
# If HCA vendors wish to add their respective values into this file
|
|
|
|
|
# (that is distributed with Open MPI), please contact the Open MPI
|
|
|
|
|
# development team. See http://www.open-mpi.org/ for details.
|
|
|
|
|
|
|
|
|
|
# This file is in the "ini" style, meaning that it has sections
|
|
|
|
|
# identified section names enclosed in square brackets (e.g.,
|
|
|
|
|
# "[Section name]") followed by "key = value" pairs indicating values
|
|
|
|
|
# for a specific HCA vendor and model. HCAs are identified by their
|
|
|
|
|
# vendor ID and vendor part ID, which can be obtained by running the
|
|
|
|
|
# diagnostic utility command "ibv_devinfo". The fields "vendor_id"
|
|
|
|
|
# and "vendor_part"id" are the vendor ID and vendor part ID,
|
|
|
|
|
# respectively.
|
|
|
|
|
|
|
|
|
|
# The sections in this file only accept a few fields:
|
|
|
|
|
|
2006-08-31 00:28:48 +04:00
|
|
|
# vendor_id: a comma-delimited list of integers of HCA vendor IDs,
|
|
|
|
|
# expressed either in decimal or hexidecimal (e.g., "13" or "0xd").
|
|
|
|
|
# Individual values can be taken directly from the output of
|
Bring over all the work from the /tmp/ib-hw-detect branch. In
addition to my design and testing, it was conceptually approved by
Gil, Gleb, Pasha, Brad, and Galen. Functionally [probably somewhat
lightly] tested by Galen. We may still have to shake out some bugs
during the next few months, but it seems to be working for all the
cases that I can throw at it.
Here's a summary of the changes from that branch:
* Move MCA parameter registration to a new file (btl_openib_mca.c):
* Properly check the retun status of registering MCA params
* Check for valid values of MCA parameters
* Make help strings better
* Otherwise, the only default value of an MCA param that was
changed was max_btls; it went from 4 to -1 (meaning: use all
available)
* Properly prototyped internal functions in _component.c
* Made a bunch of functions static that didn't need to be public
* Renamed to remove "mca_" prefix from static functions
* Call new MCA param registration function
* Call new INI file read/lookup/finalize functions
* Updated a bunch of macros to be "BTL_" instead of "ORTE_"
* Be a little more consistent with return values
* Handle -1 for the max_btls MCA param
* Fixed a free() that should have been an OBJ_RELEASE()
* Some re-indenting
* Added INI-file parsing
* New flex file: btl_openib_ini.l
* New default HCA params .ini file (probably to be expanded over
time by other HCA vendors)
* Added more show_help messages for parsing problems
* Read in INI files and cache the values for later lookup
* When component opens an HCA, lookup to see if any corresponding
values were found in the INI files (ID'ed by the HCA vendor_id
and vendor_part_id)
* Added btl_openib_verbose MCA param that shows what the INI-file
stuff does (e.g., shows which MTU your HCA ends up using)
* Added btl_openib_hca_param_files as a colon-delimited list of INI
files to check for values during startup (in order,
left-to-right, just like the MCA base directory param).
* MTU is currently the only value supported in this framework.
* It is not a fatal error if we don't find params for the HCA in
the INI file(s). Instead, just print a warning. New MCA param
btl_openib_warn_no_hca_params_found can be used to disable
printing the warning.
* Add MTU to peer negotiation when making a connection
* Exchange maximum MTU; select the lesser of the two
This commit was SVN r11182.
2006-08-14 23:30:37 +04:00
|
|
|
# "ibv_devinfo". Example:
|
|
|
|
|
#
|
|
|
|
|
# vendor_id = 0x05ad
|
|
|
|
|
|
|
|
|
|
# vendor_part_id: a comma-delimited list of integers of different HCA
|
|
|
|
|
# models from a single vendor, expressed in either decimal or
|
|
|
|
|
# hexidecimal (e.g., "13" or "0xd"). Individual values can be
|
|
|
|
|
# obtained from the output of the "ibv_devinfo". Example:
|
|
|
|
|
#
|
|
|
|
|
# vendor_part_id = 25208,25218
|
|
|
|
|
|
|
|
|
|
# mtu: an integer indicating the maximum transfer unit (MTU) to be
|
|
|
|
|
# used with this HCA. The effective MTU will be the minimum of an
|
|
|
|
|
# HCA's MTU value and its peer HCA's MTU value. Valid values are 256,
|
|
|
|
|
# 512, 1024, 2048, and 4096. Example:
|
|
|
|
|
#
|
|
|
|
|
# mtu = 1024
|
|
|
|
|
|
2006-12-14 18:52:13 +03:00
|
|
|
# use_eager_rdma: an integer indicating whether RDMA should be used
|
|
|
|
|
# for eager messages. 0 values indicate "no" (false); non-zero values
|
|
|
|
|
# indicate "yes" (true). This flag should only be enabled for
|
|
|
|
|
# HCAs that can provide guarantees about ordering of data in memory --
|
|
|
|
|
# that the last byte of an incoming packet will always be written
|
|
|
|
|
# last. Certain cards cannot provide this guarantee (such as iWARP
|
|
|
|
|
# cards), while others can (such as many InfiniBand cards).
|
|
|
|
|
|
|
|
|
|
# use_eager_rdma = 1
|
|
|
|
|
|
Bring over all the work from the /tmp/ib-hw-detect branch. In
addition to my design and testing, it was conceptually approved by
Gil, Gleb, Pasha, Brad, and Galen. Functionally [probably somewhat
lightly] tested by Galen. We may still have to shake out some bugs
during the next few months, but it seems to be working for all the
cases that I can throw at it.
Here's a summary of the changes from that branch:
* Move MCA parameter registration to a new file (btl_openib_mca.c):
* Properly check the retun status of registering MCA params
* Check for valid values of MCA parameters
* Make help strings better
* Otherwise, the only default value of an MCA param that was
changed was max_btls; it went from 4 to -1 (meaning: use all
available)
* Properly prototyped internal functions in _component.c
* Made a bunch of functions static that didn't need to be public
* Renamed to remove "mca_" prefix from static functions
* Call new MCA param registration function
* Call new INI file read/lookup/finalize functions
* Updated a bunch of macros to be "BTL_" instead of "ORTE_"
* Be a little more consistent with return values
* Handle -1 for the max_btls MCA param
* Fixed a free() that should have been an OBJ_RELEASE()
* Some re-indenting
* Added INI-file parsing
* New flex file: btl_openib_ini.l
* New default HCA params .ini file (probably to be expanded over
time by other HCA vendors)
* Added more show_help messages for parsing problems
* Read in INI files and cache the values for later lookup
* When component opens an HCA, lookup to see if any corresponding
values were found in the INI files (ID'ed by the HCA vendor_id
and vendor_part_id)
* Added btl_openib_verbose MCA param that shows what the INI-file
stuff does (e.g., shows which MTU your HCA ends up using)
* Added btl_openib_hca_param_files as a colon-delimited list of INI
files to check for values during startup (in order,
left-to-right, just like the MCA base directory param).
* MTU is currently the only value supported in this framework.
* It is not a fatal error if we don't find params for the HCA in
the INI file(s). Instead, just print a warning. New MCA param
btl_openib_warn_no_hca_params_found can be used to disable
printing the warning.
* Add MTU to peer negotiation when making a connection
* Exchange maximum MTU; select the lesser of the two
This commit was SVN r11182.
2006-08-14 23:30:37 +04:00
|
|
|
############################################################################
|
|
|
|
|
|
|
|
|
|
[default]
|
|
|
|
|
# These are the default values, identified by the vendor and part ID
|
|
|
|
|
# numbers of 0 and 0. If queried HCA does not return vendor and part
|
|
|
|
|
# ID numbers that match any of the sections in this file, the values
|
2006-08-31 00:21:47 +04:00
|
|
|
# in this section are used. Vendor IDs and part IDs can be hex or
|
|
|
|
|
# decimal.
|
Bring over all the work from the /tmp/ib-hw-detect branch. In
addition to my design and testing, it was conceptually approved by
Gil, Gleb, Pasha, Brad, and Galen. Functionally [probably somewhat
lightly] tested by Galen. We may still have to shake out some bugs
during the next few months, but it seems to be working for all the
cases that I can throw at it.
Here's a summary of the changes from that branch:
* Move MCA parameter registration to a new file (btl_openib_mca.c):
* Properly check the retun status of registering MCA params
* Check for valid values of MCA parameters
* Make help strings better
* Otherwise, the only default value of an MCA param that was
changed was max_btls; it went from 4 to -1 (meaning: use all
available)
* Properly prototyped internal functions in _component.c
* Made a bunch of functions static that didn't need to be public
* Renamed to remove "mca_" prefix from static functions
* Call new MCA param registration function
* Call new INI file read/lookup/finalize functions
* Updated a bunch of macros to be "BTL_" instead of "ORTE_"
* Be a little more consistent with return values
* Handle -1 for the max_btls MCA param
* Fixed a free() that should have been an OBJ_RELEASE()
* Some re-indenting
* Added INI-file parsing
* New flex file: btl_openib_ini.l
* New default HCA params .ini file (probably to be expanded over
time by other HCA vendors)
* Added more show_help messages for parsing problems
* Read in INI files and cache the values for later lookup
* When component opens an HCA, lookup to see if any corresponding
values were found in the INI files (ID'ed by the HCA vendor_id
and vendor_part_id)
* Added btl_openib_verbose MCA param that shows what the INI-file
stuff does (e.g., shows which MTU your HCA ends up using)
* Added btl_openib_hca_param_files as a colon-delimited list of INI
files to check for values during startup (in order,
left-to-right, just like the MCA base directory param).
* MTU is currently the only value supported in this framework.
* It is not a fatal error if we don't find params for the HCA in
the INI file(s). Instead, just print a warning. New MCA param
btl_openib_warn_no_hca_params_found can be used to disable
printing the warning.
* Add MTU to peer negotiation when making a connection
* Exchange maximum MTU; select the lesser of the two
This commit was SVN r11182.
2006-08-14 23:30:37 +04:00
|
|
|
vendor_id = 0
|
|
|
|
|
vendor_part_id = 0
|
2006-12-14 18:52:13 +03:00
|
|
|
use_eager_rdma = 0
|
Bring over all the work from the /tmp/ib-hw-detect branch. In
addition to my design and testing, it was conceptually approved by
Gil, Gleb, Pasha, Brad, and Galen. Functionally [probably somewhat
lightly] tested by Galen. We may still have to shake out some bugs
during the next few months, but it seems to be working for all the
cases that I can throw at it.
Here's a summary of the changes from that branch:
* Move MCA parameter registration to a new file (btl_openib_mca.c):
* Properly check the retun status of registering MCA params
* Check for valid values of MCA parameters
* Make help strings better
* Otherwise, the only default value of an MCA param that was
changed was max_btls; it went from 4 to -1 (meaning: use all
available)
* Properly prototyped internal functions in _component.c
* Made a bunch of functions static that didn't need to be public
* Renamed to remove "mca_" prefix from static functions
* Call new MCA param registration function
* Call new INI file read/lookup/finalize functions
* Updated a bunch of macros to be "BTL_" instead of "ORTE_"
* Be a little more consistent with return values
* Handle -1 for the max_btls MCA param
* Fixed a free() that should have been an OBJ_RELEASE()
* Some re-indenting
* Added INI-file parsing
* New flex file: btl_openib_ini.l
* New default HCA params .ini file (probably to be expanded over
time by other HCA vendors)
* Added more show_help messages for parsing problems
* Read in INI files and cache the values for later lookup
* When component opens an HCA, lookup to see if any corresponding
values were found in the INI files (ID'ed by the HCA vendor_id
and vendor_part_id)
* Added btl_openib_verbose MCA param that shows what the INI-file
stuff does (e.g., shows which MTU your HCA ends up using)
* Added btl_openib_hca_param_files as a colon-delimited list of INI
files to check for values during startup (in order,
left-to-right, just like the MCA base directory param).
* MTU is currently the only value supported in this framework.
* It is not a fatal error if we don't find params for the HCA in
the INI file(s). Instead, just print a warning. New MCA param
btl_openib_warn_no_hca_params_found can be used to disable
printing the warning.
* Add MTU to peer negotiation when making a connection
* Exchange maximum MTU; select the lesser of the two
This commit was SVN r11182.
2006-08-14 23:30:37 +04:00
|
|
|
mtu = 1024
|
|
|
|
|
|
|
|
|
|
############################################################################
|
|
|
|
|
|
|
|
|
|
[Mellanox Tavor Infinihost]
|
2006-08-31 00:21:47 +04:00
|
|
|
# Several vendors resell Mellanox hardware and put their own firmware
|
|
|
|
|
# on the cards, therefore overriding the default Mellanox vendor ID.
|
|
|
|
|
#
|
|
|
|
|
# Mellanox 0x2c9
|
|
|
|
|
# Cisco 0x5ad
|
|
|
|
|
# Silverstorm 0x66a
|
|
|
|
|
# Voltaire 0x8f1
|
|
|
|
|
#
|
|
|
|
|
vendor_id = 0x2c9,0x5ad,0x66a,0x8f1
|
2006-10-16 18:46:39 +04:00
|
|
|
vendor_part_id = 23108
|
2006-12-14 18:52:13 +03:00
|
|
|
use_eager_rdma = 1
|
Bring over all the work from the /tmp/ib-hw-detect branch. In
addition to my design and testing, it was conceptually approved by
Gil, Gleb, Pasha, Brad, and Galen. Functionally [probably somewhat
lightly] tested by Galen. We may still have to shake out some bugs
during the next few months, but it seems to be working for all the
cases that I can throw at it.
Here's a summary of the changes from that branch:
* Move MCA parameter registration to a new file (btl_openib_mca.c):
* Properly check the retun status of registering MCA params
* Check for valid values of MCA parameters
* Make help strings better
* Otherwise, the only default value of an MCA param that was
changed was max_btls; it went from 4 to -1 (meaning: use all
available)
* Properly prototyped internal functions in _component.c
* Made a bunch of functions static that didn't need to be public
* Renamed to remove "mca_" prefix from static functions
* Call new MCA param registration function
* Call new INI file read/lookup/finalize functions
* Updated a bunch of macros to be "BTL_" instead of "ORTE_"
* Be a little more consistent with return values
* Handle -1 for the max_btls MCA param
* Fixed a free() that should have been an OBJ_RELEASE()
* Some re-indenting
* Added INI-file parsing
* New flex file: btl_openib_ini.l
* New default HCA params .ini file (probably to be expanded over
time by other HCA vendors)
* Added more show_help messages for parsing problems
* Read in INI files and cache the values for later lookup
* When component opens an HCA, lookup to see if any corresponding
values were found in the INI files (ID'ed by the HCA vendor_id
and vendor_part_id)
* Added btl_openib_verbose MCA param that shows what the INI-file
stuff does (e.g., shows which MTU your HCA ends up using)
* Added btl_openib_hca_param_files as a colon-delimited list of INI
files to check for values during startup (in order,
left-to-right, just like the MCA base directory param).
* MTU is currently the only value supported in this framework.
* It is not a fatal error if we don't find params for the HCA in
the INI file(s). Instead, just print a warning. New MCA param
btl_openib_warn_no_hca_params_found can be used to disable
printing the warning.
* Add MTU to peer negotiation when making a connection
* Exchange maximum MTU; select the lesser of the two
This commit was SVN r11182.
2006-08-14 23:30:37 +04:00
|
|
|
mtu = 1024
|
|
|
|
|
|
|
|
|
|
############################################################################
|
|
|
|
|
|
|
|
|
|
[Mellanox Arbel InfiniHost III MemFree/Tavor]
|
2006-08-31 00:21:47 +04:00
|
|
|
vendor_id = 0x2c9,0x5ad,0x66a,0x8f1
|
Bring over all the work from the /tmp/ib-hw-detect branch. In
addition to my design and testing, it was conceptually approved by
Gil, Gleb, Pasha, Brad, and Galen. Functionally [probably somewhat
lightly] tested by Galen. We may still have to shake out some bugs
during the next few months, but it seems to be working for all the
cases that I can throw at it.
Here's a summary of the changes from that branch:
* Move MCA parameter registration to a new file (btl_openib_mca.c):
* Properly check the retun status of registering MCA params
* Check for valid values of MCA parameters
* Make help strings better
* Otherwise, the only default value of an MCA param that was
changed was max_btls; it went from 4 to -1 (meaning: use all
available)
* Properly prototyped internal functions in _component.c
* Made a bunch of functions static that didn't need to be public
* Renamed to remove "mca_" prefix from static functions
* Call new MCA param registration function
* Call new INI file read/lookup/finalize functions
* Updated a bunch of macros to be "BTL_" instead of "ORTE_"
* Be a little more consistent with return values
* Handle -1 for the max_btls MCA param
* Fixed a free() that should have been an OBJ_RELEASE()
* Some re-indenting
* Added INI-file parsing
* New flex file: btl_openib_ini.l
* New default HCA params .ini file (probably to be expanded over
time by other HCA vendors)
* Added more show_help messages for parsing problems
* Read in INI files and cache the values for later lookup
* When component opens an HCA, lookup to see if any corresponding
values were found in the INI files (ID'ed by the HCA vendor_id
and vendor_part_id)
* Added btl_openib_verbose MCA param that shows what the INI-file
stuff does (e.g., shows which MTU your HCA ends up using)
* Added btl_openib_hca_param_files as a colon-delimited list of INI
files to check for values during startup (in order,
left-to-right, just like the MCA base directory param).
* MTU is currently the only value supported in this framework.
* It is not a fatal error if we don't find params for the HCA in
the INI file(s). Instead, just print a warning. New MCA param
btl_openib_warn_no_hca_params_found can be used to disable
printing the warning.
* Add MTU to peer negotiation when making a connection
* Exchange maximum MTU; select the lesser of the two
This commit was SVN r11182.
2006-08-14 23:30:37 +04:00
|
|
|
vendor_part_id = 25208,25218
|
2006-12-14 18:52:13 +03:00
|
|
|
use_eager_rdma = 1
|
Bring over all the work from the /tmp/ib-hw-detect branch. In
addition to my design and testing, it was conceptually approved by
Gil, Gleb, Pasha, Brad, and Galen. Functionally [probably somewhat
lightly] tested by Galen. We may still have to shake out some bugs
during the next few months, but it seems to be working for all the
cases that I can throw at it.
Here's a summary of the changes from that branch:
* Move MCA parameter registration to a new file (btl_openib_mca.c):
* Properly check the retun status of registering MCA params
* Check for valid values of MCA parameters
* Make help strings better
* Otherwise, the only default value of an MCA param that was
changed was max_btls; it went from 4 to -1 (meaning: use all
available)
* Properly prototyped internal functions in _component.c
* Made a bunch of functions static that didn't need to be public
* Renamed to remove "mca_" prefix from static functions
* Call new MCA param registration function
* Call new INI file read/lookup/finalize functions
* Updated a bunch of macros to be "BTL_" instead of "ORTE_"
* Be a little more consistent with return values
* Handle -1 for the max_btls MCA param
* Fixed a free() that should have been an OBJ_RELEASE()
* Some re-indenting
* Added INI-file parsing
* New flex file: btl_openib_ini.l
* New default HCA params .ini file (probably to be expanded over
time by other HCA vendors)
* Added more show_help messages for parsing problems
* Read in INI files and cache the values for later lookup
* When component opens an HCA, lookup to see if any corresponding
values were found in the INI files (ID'ed by the HCA vendor_id
and vendor_part_id)
* Added btl_openib_verbose MCA param that shows what the INI-file
stuff does (e.g., shows which MTU your HCA ends up using)
* Added btl_openib_hca_param_files as a colon-delimited list of INI
files to check for values during startup (in order,
left-to-right, just like the MCA base directory param).
* MTU is currently the only value supported in this framework.
* It is not a fatal error if we don't find params for the HCA in
the INI file(s). Instead, just print a warning. New MCA param
btl_openib_warn_no_hca_params_found can be used to disable
printing the warning.
* Add MTU to peer negotiation when making a connection
* Exchange maximum MTU; select the lesser of the two
This commit was SVN r11182.
2006-08-14 23:30:37 +04:00
|
|
|
mtu = 1024
|
|
|
|
|
|
|
|
|
|
############################################################################
|
|
|
|
|
|
|
|
|
|
[Mellanox Sinai Infinihost III]
|
2006-08-31 00:21:47 +04:00
|
|
|
vendor_id = 0x2c9,0x5ad,0x66a,0x8f1
|
Bring over all the work from the /tmp/ib-hw-detect branch. In
addition to my design and testing, it was conceptually approved by
Gil, Gleb, Pasha, Brad, and Galen. Functionally [probably somewhat
lightly] tested by Galen. We may still have to shake out some bugs
during the next few months, but it seems to be working for all the
cases that I can throw at it.
Here's a summary of the changes from that branch:
* Move MCA parameter registration to a new file (btl_openib_mca.c):
* Properly check the retun status of registering MCA params
* Check for valid values of MCA parameters
* Make help strings better
* Otherwise, the only default value of an MCA param that was
changed was max_btls; it went from 4 to -1 (meaning: use all
available)
* Properly prototyped internal functions in _component.c
* Made a bunch of functions static that didn't need to be public
* Renamed to remove "mca_" prefix from static functions
* Call new MCA param registration function
* Call new INI file read/lookup/finalize functions
* Updated a bunch of macros to be "BTL_" instead of "ORTE_"
* Be a little more consistent with return values
* Handle -1 for the max_btls MCA param
* Fixed a free() that should have been an OBJ_RELEASE()
* Some re-indenting
* Added INI-file parsing
* New flex file: btl_openib_ini.l
* New default HCA params .ini file (probably to be expanded over
time by other HCA vendors)
* Added more show_help messages for parsing problems
* Read in INI files and cache the values for later lookup
* When component opens an HCA, lookup to see if any corresponding
values were found in the INI files (ID'ed by the HCA vendor_id
and vendor_part_id)
* Added btl_openib_verbose MCA param that shows what the INI-file
stuff does (e.g., shows which MTU your HCA ends up using)
* Added btl_openib_hca_param_files as a colon-delimited list of INI
files to check for values during startup (in order,
left-to-right, just like the MCA base directory param).
* MTU is currently the only value supported in this framework.
* It is not a fatal error if we don't find params for the HCA in
the INI file(s). Instead, just print a warning. New MCA param
btl_openib_warn_no_hca_params_found can be used to disable
printing the warning.
* Add MTU to peer negotiation when making a connection
* Exchange maximum MTU; select the lesser of the two
This commit was SVN r11182.
2006-08-14 23:30:37 +04:00
|
|
|
vendor_part_id = 25204
|
2006-12-14 18:52:13 +03:00
|
|
|
use_eager_rdma = 1
|
Bring over all the work from the /tmp/ib-hw-detect branch. In
addition to my design and testing, it was conceptually approved by
Gil, Gleb, Pasha, Brad, and Galen. Functionally [probably somewhat
lightly] tested by Galen. We may still have to shake out some bugs
during the next few months, but it seems to be working for all the
cases that I can throw at it.
Here's a summary of the changes from that branch:
* Move MCA parameter registration to a new file (btl_openib_mca.c):
* Properly check the retun status of registering MCA params
* Check for valid values of MCA parameters
* Make help strings better
* Otherwise, the only default value of an MCA param that was
changed was max_btls; it went from 4 to -1 (meaning: use all
available)
* Properly prototyped internal functions in _component.c
* Made a bunch of functions static that didn't need to be public
* Renamed to remove "mca_" prefix from static functions
* Call new MCA param registration function
* Call new INI file read/lookup/finalize functions
* Updated a bunch of macros to be "BTL_" instead of "ORTE_"
* Be a little more consistent with return values
* Handle -1 for the max_btls MCA param
* Fixed a free() that should have been an OBJ_RELEASE()
* Some re-indenting
* Added INI-file parsing
* New flex file: btl_openib_ini.l
* New default HCA params .ini file (probably to be expanded over
time by other HCA vendors)
* Added more show_help messages for parsing problems
* Read in INI files and cache the values for later lookup
* When component opens an HCA, lookup to see if any corresponding
values were found in the INI files (ID'ed by the HCA vendor_id
and vendor_part_id)
* Added btl_openib_verbose MCA param that shows what the INI-file
stuff does (e.g., shows which MTU your HCA ends up using)
* Added btl_openib_hca_param_files as a colon-delimited list of INI
files to check for values during startup (in order,
left-to-right, just like the MCA base directory param).
* MTU is currently the only value supported in this framework.
* It is not a fatal error if we don't find params for the HCA in
the INI file(s). Instead, just print a warning. New MCA param
btl_openib_warn_no_hca_params_found can be used to disable
printing the warning.
* Add MTU to peer negotiation when making a connection
* Exchange maximum MTU; select the lesser of the two
This commit was SVN r11182.
2006-08-14 23:30:37 +04:00
|
|
|
mtu = 2048
|
2006-12-12 17:12:39 +03:00
|
|
|
|
|
|
|
|
############################################################################
|
|
|
|
|
|
|
|
|
|
[IBM eHCA 4x and 12x ]
|
|
|
|
|
vendor_id = 0x5076
|
|
|
|
|
vendor_part_id = 0
|
2006-12-14 18:52:13 +03:00
|
|
|
use_eager_rdma = 1
|
2006-12-12 17:12:39 +03:00
|
|
|
mtu = 2048
|
2007-01-19 22:46:29 +03:00
|
|
|
|
|
|
|
|
############################################################################
|
|
|
|
|
|
|
|
|
|
[QLogic InfiniPath]
|
|
|
|
|
vendor_id = 0x1fc1
|
|
|
|
|
vendor_part_id = 13,16
|
|
|
|
|
use_eager_rdma = 1
|
|
|
|
|
mtu = 2048
|