ports/openmpi
ports/openmpi
1
1
Форкнуть 0
Код Релизы Активность
e4c36a3611
openmpi/orte/runtime/orte_mca_params.c

504 строки
24 KiB
C
Исходник Обычный вид История

ORTE-level MCA params are defined in several places. Ompi_info cannot call orte_init due to an issue with the memory allocator, thus making it impossible for ompi_info to display all of the ORTE-level MCA params. By consolidating them all into one function, ompi_info can call that function and register the desired variables. This also requires, however, that ompi_info call orte_output_init to avoid generating tons of error messages, so make that adjustment too. Fixes ticket #1314 In addition, orte_output has a race condition issue whereby calls to orte_output/verbose can occur prior to either the RML being defined/setup, or the HNP being defined. This latter occurs during the initialization of the orte_process_info structure. In both cases, there is no way orte_output can send the output to the HNP. Hence, the message must be simply output locally. Fixes ticket #1315 This commit was SVN r18524.
2008-05-28 17:29:58 +04:00
/*
Some relatively minor C/R related cleanup * Fix a configure warning for checking --enable-ft-thread * In hnp and orted ErrMgr components check to see if other components have already recovered this process before trying to recover it again. * Fix 'npernode' for restarting using the resilient rmaps component * export ompi_info_set, so that internal functionality can use it. This commit was SVN r23535.
2010-07-30 22:59:34 +04:00
* Copyright (c) 2004-2010 The Trustees of Indiana University and Indiana
ORTE-level MCA params are defined in several places. Ompi_info cannot call orte_init due to an issue with the memory allocator, thus making it impossible for ompi_info to display all of the ORTE-level MCA params. By consolidating them all into one function, ompi_info can call that function and register the desired variables. This also requires, however, that ompi_info call orte_output_init to avoid generating tons of error messages, so make that adjustment too. Fixes ticket #1314 In addition, orte_output has a race condition issue whereby calls to orte_output/verbose can occur prior to either the RML being defined/setup, or the HNP being defined. This latter occurs during the initialization of the orte_process_info structure. In both cases, there is no way orte_output can send the output to the HNP. Hence, the message must be simply output locally. Fixes ticket #1315 This commit was SVN r18524.
2008-05-28 17:29:58 +04:00
* University Research and Technology
* Corporation. All rights reserved.
* Copyright (c) 2004-2008 The University of Tennessee and The University
* of Tennessee Research Foundation. All rights
* reserved.
* Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
* University of Stuttgart. All rights reserved.
* Copyright (c) 2004-2005 The Regents of the University of California.
* All rights reserved.
* Fix a truckload of Cisco copyrights to be the same as the rest of the code base. * Fix a few misspellings in other copyrights. This commit was SVN r20241.
2009-01-11 05:30:00 +03:00
* Copyright (c) 2007 Cisco Systems, Inc. All rights reserved.
Added new solaris sysinfo module. Also added code to assign orte_local_chip_type and orte_local_chip_model in MPI processes it the appropriate sysinfo module found the values on the machine. This commit was SVN r23581.
2010-08-09 23:28:56 +04:00
* Copyright (c) 2009-2010 Oracle and/or its affiliates. All rights reserved.
ORTE-level MCA params are defined in several places. Ompi_info cannot call orte_init due to an issue with the memory allocator, thus making it impossible for ompi_info to display all of the ORTE-level MCA params. By consolidating them all into one function, ompi_info can call that function and register the desired variables. This also requires, however, that ompi_info call orte_output_init to avoid generating tons of error messages, so make that adjustment too. Fixes ticket #1314 In addition, orte_output has a race condition issue whereby calls to orte_output/verbose can occur prior to either the RML being defined/setup, or the HNP being defined. This latter occurs during the initialization of the orte_process_info structure. In both cases, there is no way orte_output can send the output to the HNP. Hence, the message must be simply output locally. Fixes ticket #1315 This commit was SVN r18524.
2008-05-28 17:29:58 +04:00
* $COPYRIGHT$
*
* Additional copyrights may follow
*
* $HEADER$
*/
#include "orte_config.h"
#include "orte/constants.h"
#include "orte/types.h"
#ifdef HAVE_SYS_TIME_H
#include <sys/time.h>
#endif
Continue to improve timing instrumentation. Add ability to store timing data directly to a file instead of just to stdout. This commit was SVN r20229.
2009-01-08 17:27:52 +03:00
#include <stdio.h>
ORTE-level MCA params are defined in several places. Ompi_info cannot call orte_init due to an issue with the memory allocator, thus making it impossible for ompi_info to display all of the ORTE-level MCA params. By consolidating them all into one function, ompi_info can call that function and register the desired variables. This also requires, however, that ompi_info call orte_output_init to avoid generating tons of error messages, so make that adjustment too. Fixes ticket #1314 In addition, orte_output has a race condition issue whereby calls to orte_output/verbose can occur prior to either the RML being defined/setup, or the HNP being defined. This latter occurs during the initialization of the orte_process_info structure. In both cases, there is no way orte_output can send the output to the HNP. Hence, the message must be simply output locally. Fixes ticket #1315 This commit was SVN r18524.
2008-05-28 17:29:58 +04:00
#include "opal/mca/base/mca_base_param.h"
Modify the OMPI paffinity and mapping system to support socket-level mapping and binding. Mostly refactors existing code, with modifications to the odls_default module to support the new capabilities. Adds several new mpirun options: * -bysocket - assign ranks on a node by socket. Effectively load balances the procs assigned to a node across the available sockets. Note that ranks can still be bound to a specific core within the socket, or to the entire socket - the mapping is independent of the binding. * -bind-to-socket - bind each rank to all the cores on the socket to which they are assigned. * -bind-to-core - currently the default behavior (maintained from prior default) * -npersocket N - launch N procs for every socket on a node. Note that this implies we know how many sockets are on a node. Mpirun will determine its local values. These can be overridden by provided values, either via MCA param or in a hostfile Similar features/options are provided at the board level for multi-board nodes. Documentation to follow... This commit was SVN r21791.
2009-08-11 06:51:27 +04:00
#include "opal/mca/paffinity/base/base.h"
Continue to improve timing instrumentation. Add ability to store timing data directly to a file instead of just to stdout. This commit was SVN r20229.
2009-01-08 17:27:52 +03:00
#include "opal/util/output.h"
Modify the paffinity system to handle binding directives that are "soft" - i.e., when someone directs that we bind if the system supports it. This allows community members to distribute OMPI with default MCA param files that direct general binding policies, without having the distributed software fail if the system cannot support those policies. The new options work by adding an ":if-avail" qualifier to the "bind-to-socket" and "bind-to-core" MCA params. If the system does not support this capability, the job will launch anyway. Without the qualifier, the job will abort with an error message indicating that the required functionality is not supported on this system. This commit was SVN r21975.
2009-09-18 23:48:42 +04:00
#include "opal/util/argv.h"
ORTE-level MCA params are defined in several places. Ompi_info cannot call orte_init due to an issue with the memory allocator, thus making it impossible for ompi_info to display all of the ORTE-level MCA params. By consolidating them all into one function, ompi_info can call that function and register the desired variables. This also requires, however, that ompi_info call orte_output_init to avoid generating tons of error messages, so make that adjustment too. Fixes ticket #1314 In addition, orte_output has a race condition issue whereby calls to orte_output/verbose can occur prior to either the RML being defined/setup, or the HNP being defined. This latter occurs during the initialization of the orte_process_info structure. In both cases, there is no way orte_output can send the output to the HNP. Hence, the message must be simply output locally. Fixes ticket #1315 This commit was SVN r18524.
2008-05-28 17:29:58 +04:00
#include "orte/util/proc_info.h"
Some (hopefully final!) adjustments and corrections to the paffinity support: 1. default -npersocket to force -bind-to-socket 2. if we cannot get a value for cores/socket, try using #logical cpus. otherwise, default to 1 core 3. add missing error message for not-enough-processors 4. since we no longer loop through orte_register_params twice, put the auto-detect of topology info in the rte_init for hnp and std_orted 5. fix bind-to-core, bysocket combination This commit was SVN r21992.
2009-09-22 19:41:03 +04:00
#include "orte/mca/errmgr/errmgr.h"
ORTE-level MCA params are defined in several places. Ompi_info cannot call orte_init due to an issue with the memory allocator, thus making it impossible for ompi_info to display all of the ORTE-level MCA params. By consolidating them all into one function, ompi_info can call that function and register the desired variables. This also requires, however, that ompi_info call orte_output_init to avoid generating tons of error messages, so make that adjustment too. Fixes ticket #1314 In addition, orte_output has a race condition issue whereby calls to orte_output/verbose can occur prior to either the RML being defined/setup, or the HNP being defined. This latter occurs during the initialization of the orte_process_info structure. In both cases, there is no way orte_output can send the output to the HNP. Hence, the message must be simply output locally. Fixes ticket #1315 This commit was SVN r18524.
2008-05-28 17:29:58 +04:00
#include "orte/runtime/runtime.h"
#include "orte/runtime/orte_globals.h"
Update the cm ess module to support orted bootstrap. Continue work towards bootstrap capability. This commit was SVN r21989.
2009-09-22 06:16:40 +04:00
static bool passed_thru = false;
ORTE-level MCA params are defined in several places. Ompi_info cannot call orte_init due to an issue with the memory allocator, thus making it impossible for ompi_info to display all of the ORTE-level MCA params. By consolidating them all into one function, ompi_info can call that function and register the desired variables. This also requires, however, that ompi_info call orte_output_init to avoid generating tons of error messages, so make that adjustment too. Fixes ticket #1314 In addition, orte_output has a race condition issue whereby calls to orte_output/verbose can occur prior to either the RML being defined/setup, or the HNP being defined. This latter occurs during the initialization of the orte_process_info structure. In both cases, there is no way orte_output can send the output to the HNP. Hence, the message must be simply output locally. Fixes ticket #1315 This commit was SVN r18524.
2008-05-28 17:29:58 +04:00
int orte_register_params(void)
{
Enable comm_spawn of slave processes, currently only active for the rsh, slurm, and tm environments. Establish support for local rsh environments in the plm/base so that rsh of local slaves can be done by any environment that supports it. Create new orte_rsh_agent param so users can specify rsh agent from outside of rsh plm, and sym link that to the old plm_rsh_agent and pls_rsh_agent options. Modify the orte-bootproxy to pass prefix for the remote slave to support hetero/hybrid scenarios This commit was SVN r20492.
2009-02-09 23:44:44 +03:00
int value, tmp;
Modify the paffinity system to handle binding directives that are "soft" - i.e., when someone directs that we bind if the system supports it. This allows community members to distribute OMPI with default MCA param files that direct general binding policies, without having the distributed software fail if the system cannot support those policies. The new options work by adding an ":if-avail" qualifier to the "bind-to-socket" and "bind-to-core" MCA params. If the system does not support this capability, the job will launch anyway. Without the qualifier, the job will abort with an error message indicating that the required functionality is not supported on this system. This commit was SVN r21975.
2009-09-18 23:48:42 +04:00
char *strval, **params;
uint16_t binding;
ORTE-level MCA params are defined in several places. Ompi_info cannot call orte_init due to an issue with the memory allocator, thus making it impossible for ompi_info to display all of the ORTE-level MCA params. By consolidating them all into one function, ompi_info can call that function and register the desired variables. This also requires, however, that ompi_info call orte_output_init to avoid generating tons of error messages, so make that adjustment too. Fixes ticket #1314 In addition, orte_output has a race condition issue whereby calls to orte_output/verbose can occur prior to either the RML being defined/setup, or the HNP being defined. This latter occurs during the initialization of the orte_process_info structure. In both cases, there is no way orte_output can send the output to the HNP. Hence, the message must be simply output locally. Fixes ticket #1315 This commit was SVN r18524.
2008-05-28 17:29:58 +04:00
Update the cm ess module to support orted bootstrap. Continue work towards bootstrap capability. This commit was SVN r21989.
2009-09-22 06:16:40 +04:00
/* only go thru this once - mpirun calls it twice, which causes
* any error messages to show up twice
*/
if (passed_thru) {
return ORTE_SUCCESS;
}
passed_thru = true;
Restore process recovery for procs local to mpirun (first step towards restoring full capability). Define three new MCA params: 1. orte_enable_recovery - default recovery policy, can be overridden on a per-job basis 2. orte_max_local_restarts - default max number of local restarts, can be overridden 3. orte_max_global_restarts - default max number of relocates, can be overridden Implement the restart_proc API for the ODLS framework, reorganize the default fns a little to avoid copying code. This commit was SVN r23057.
2010-04-28 08:06:57 +04:00
#if !ORTE_DISABLE_FULL_SUPPORT
/* get a clean output channel too - need to do this here because
* we use it below, and orterun and some other tools call this
* function prior to calling orte_init
*/
{
opal_output_stream_t lds;
OBJ_CONSTRUCT(&lds, opal_output_stream_t);
lds.lds_want_stdout = true;
orte_clean_output = opal_output_open(&lds);
OBJ_DESTRUCT(&lds);
}
#endif /* !ORTE_DISABLE_FULL_SUPPORT */
Complete implementation of the --without-rte-support configure option. Working with Brian, this has been tested on RedStorm. Some minor changes to help facilitate debugger support so that both mpirun and yod can operate with it. Still to be completed. This commit was SVN r18664.
2008-06-18 07:15:56 +04:00
mca_base_param_reg_int_name("orte", "base_help_aggregate",
"If orte_base_help_aggregate is true, duplicate help messages will be aggregated rather than displayed individually. This can be helpful for parallel jobs that experience multiple identical failures; rather than print out the same help/failure message N times, display it once with a count of how many processes sent the same message.",
false, false,
(int) true, &value);
orte_help_want_aggregate = OPAL_INT_TO_BOOL(value);
mca_base_param_reg_string_name("orte", "tmpdir_base",
"Base of the session directory tree",
- Revert r20739 This commit was SVN r20742. The following SVN revision numbers were found above: r20739 --> open-mpi/ompi@781caee0b670ea169baead8facc23390112f094f
2009-03-06 00:56:03 +03:00
false, false, NULL, &(orte_process_info.tmpdir_base));
It is okay for us to init the ORTE mca params multiple times. Indeed, it is absolutely required by orterun as the first time has to be done prior to parsing the command line, which means that the mca values haven't been parsed yet! Add ability for sys admins to prohibit putting session directories under specified locations. Thus, they can now protect parallel file systems from foolish user mistakes. This commit was SVN r18721.
2008-06-24 21:50:56 +04:00
mca_base_param_reg_string_name("orte", "no_session_dirs",
"Prohibited locations for session directories (multiple locations separated by ',', default=NULL)",
false, false, NULL, &orte_prohibited_session_dirs);
Create a new mca parameter to control creation of session directories. Defaults to true so that the current behavior of always creating them is preserved. If set to false (0), then don't create session directories. Helps in those environments where session directories are a problem. Tell the sm btl that it cannot run if no session directories were created. This commit was SVN r22756.
2010-03-02 18:18:33 +03:00
mca_base_param_reg_int_name("orte", "create_session_dirs",
"Create session directories",
Don't overwrite a prior setting for create_session_dirs This commit was SVN r23383.
2010-07-13 10:30:09 +04:00
false, false, orte_create_session_dirs, &value);
Create a new mca parameter to control creation of session directories. Defaults to true so that the current behavior of always creating them is preserved. If set to false (0), then don't create session directories. Helps in those environments where session directories are a problem. Tell the sm btl that it cannot run if no session directories were created. This commit was SVN r22756.
2010-03-02 18:18:33 +03:00
orte_create_session_dirs = OPAL_INT_TO_BOOL(value);
Truly respect the -quiet option. Make it an mca param so someone doesn't have to put it solely on the cmd line. Tell show_help to shaddup as well. This commit was SVN r22926.
2010-04-02 18:19:38 +04:00
mca_base_param_reg_int_name("orte", "execute_quiet",
"Do not output error and help messages",
false, false, (int) false, &value);
orte_execute_quiet = OPAL_INT_TO_BOOL(value);
To help with debugging, add a new mca param that instructs ORTE_ERROR_LOG to output "silent" errors. Helps to track down silent errors that don't have an associated error message (e.g., via show_help). This commit was SVN r23893.
2010-10-16 07:29:47 +04:00
mca_base_param_reg_int_name("orte", "report_silent_errors",
"Report all errors, including silent ones",
false, false, (int) false, &value);
orte_report_silent_errors = OPAL_INT_TO_BOOL(value);
Complete implementation of the --without-rte-support configure option. Working with Brian, this has been tested on RedStorm. Some minor changes to help facilitate debugger support so that both mpirun and yod can operate with it. Still to be completed. This commit was SVN r18664.
2008-06-18 07:15:56 +04:00
#if !ORTE_DISABLE_FULL_SUPPORT
fixes to get compiling on Red Storm again This commit was SVN r20252.
2009-01-13 01:30:00 +03:00
mca_base_param_reg_int_name("orte", "send_profile",
"Send profile info in launch message",
false, false,
(int) false, &value);
orte_send_profile = OPAL_INT_TO_BOOL(value);
ORTE-level MCA params are defined in several places. Ompi_info cannot call orte_init due to an issue with the memory allocator, thus making it impossible for ompi_info to display all of the ORTE-level MCA params. By consolidating them all into one function, ompi_info can call that function and register the desired variables. This also requires, however, that ompi_info call orte_output_init to avoid generating tons of error messages, so make that adjustment too. Fixes ticket #1314 In addition, orte_output has a race condition issue whereby calls to orte_output/verbose can occur prior to either the RML being defined/setup, or the HNP being defined. This latter occurs during the initialization of the orte_process_info structure. In both cases, there is no way orte_output can send the output to the HNP. Hence, the message must be simply output locally. Fixes ticket #1315 This commit was SVN r18524.
2008-05-28 17:29:58 +04:00
mca_base_param_reg_int_name("orte", "debug",
"Top-level ORTE debug switch (default verbosity: 1)",
false, false, (int)false, &value);
orte_debug_flag = OPAL_INT_TO_BOOL(value);
mca_base_param_reg_int_name("orte", "debug_verbose",
"Verbosity level for ORTE debug messages (default: 1)",
false, false, -1, &orte_debug_verbosity);
Add an mca param to indicate if orte progress threads are to be enabled. Error out if this is given and libevent thread support was not built. This commit was SVN r24089.
2010-11-25 02:28:00 +03:00
mca_base_param_reg_int_name("orte", "debug_daemons",
ORTE-level MCA params are defined in several places. Ompi_info cannot call orte_init due to an issue with the memory allocator, thus making it impossible for ompi_info to display all of the ORTE-level MCA params. By consolidating them all into one function, ompi_info can call that function and register the desired variables. This also requires, however, that ompi_info call orte_output_init to avoid generating tons of error messages, so make that adjustment too. Fixes ticket #1314 In addition, orte_output has a race condition issue whereby calls to orte_output/verbose can occur prior to either the RML being defined/setup, or the HNP being defined. This latter occurs during the initialization of the orte_process_info structure. In both cases, there is no way orte_output can send the output to the HNP. Hence, the message must be simply output locally. Fixes ticket #1315 This commit was SVN r18524.
2008-05-28 17:29:58 +04:00
"Whether to debug the ORTE daemons or not",
false, false, (int)false, &value);
orte_debug_daemons_flag = OPAL_INT_TO_BOOL(value);
mca_base_param_reg_int_name("orte", "debug_daemons_file",
"Whether want stdout/stderr of daemons to go to a file or not",
false, false, (int)false, &value);
orte_debug_daemons_file_flag = OPAL_INT_TO_BOOL(value);
/* If --debug-daemons-file was specified, that also implies
Add an mca param to indicate if orte progress threads are to be enabled. Error out if this is given and libevent thread support was not built. This commit was SVN r24089.
2010-11-25 02:28:00 +03:00
--debug-daemons */
ORTE-level MCA params are defined in several places. Ompi_info cannot call orte_init due to an issue with the memory allocator, thus making it impossible for ompi_info to display all of the ORTE-level MCA params. By consolidating them all into one function, ompi_info can call that function and register the desired variables. This also requires, however, that ompi_info call orte_output_init to avoid generating tons of error messages, so make that adjustment too. Fixes ticket #1314 In addition, orte_output has a race condition issue whereby calls to orte_output/verbose can occur prior to either the RML being defined/setup, or the HNP being defined. This latter occurs during the initialization of the orte_process_info structure. In both cases, there is no way orte_output can send the output to the HNP. Hence, the message must be simply output locally. Fixes ticket #1315 This commit was SVN r18524.
2008-05-28 17:29:58 +04:00
if (orte_debug_daemons_file_flag) {
orte_debug_daemons_flag = true;
}
Fixes trac:1361: mainly add new internal MCA parameter that orterun will set when it launches under debuggers using the --debug option. This commit was SVN r19116. The following Trac tickets were found above: Ticket 1361 --> https://svn.open-mpi.org/trac/ompi/ticket/1361
2008-08-01 02:11:46 +04:00
Update the cm ess module to support orted bootstrap. Continue work towards bootstrap capability. This commit was SVN r21989.
2009-09-22 06:16:40 +04:00
mca_base_param_reg_int_name("orte", "daemon_bootstrap",
"Bootstrap the connection to the HNP",
false, false, (int)false, &value);
orte_daemon_bootstrap = OPAL_INT_TO_BOOL(value);
Provide a new option that allows a user to leave an ssh session open without getting deluged by ORTE debug output. The new option is --leave-session-attached, with a corresponding MCA param of orte_leave_session_attached. Theoretically, any PLM could use this - but in reality, all of them except rsh/ssh already leave the session attached anyway. This fixes trac:656 - a REALLY old ticket This commit was SVN r19294. The following Trac tickets were found above: Ticket 656 --> https://svn.open-mpi.org/trac/ompi/ticket/656
2008-08-14 22:59:01 +04:00
/* do we want session output left open? */
mca_base_param_reg_int_name("orte", "leave_session_attached",
"Whether applications and/or daemons should leave their sessions "
"attached so that any output can be received - this allows X forwarding "
"without all the attendant debugging output",
false, false, (int)false, &value);
orte_leave_session_attached = OPAL_INT_TO_BOOL(value);
Fixes trac:1361: mainly add new internal MCA parameter that orterun will set when it launches under debuggers using the --debug option. This commit was SVN r19116. The following Trac tickets were found above: Ticket 1361 --> https://svn.open-mpi.org/trac/ompi/ticket/1361
2008-08-01 02:11:46 +04:00
/* See comment in orte/tools/orterun/debuggers.c about this MCA
param (this param is internal) */
mca_base_param_reg_int_name("orte",
"in_parallel_debugger",
"Whether the application is being debugged "
"in a parallel debugger (default: false)",
true, false, 0, &value);
orte_in_parallel_debugger = OPAL_INT_TO_BOOL(value);
ORTE-level MCA params are defined in several places. Ompi_info cannot call orte_init due to an issue with the memory allocator, thus making it impossible for ompi_info to display all of the ORTE-level MCA params. By consolidating them all into one function, ompi_info can call that function and register the desired variables. This also requires, however, that ompi_info call orte_output_init to avoid generating tons of error messages, so make that adjustment too. Fixes ticket #1314 In addition, orte_output has a race condition issue whereby calls to orte_output/verbose can occur prior to either the RML being defined/setup, or the HNP being defined. This latter occurs during the initialization of the orte_process_info structure. In both cases, there is no way orte_output can send the output to the HNP. Hence, the message must be simply output locally. Fixes ticket #1315 This commit was SVN r18524.
2008-05-28 17:29:58 +04:00
mca_base_param_reg_int_name("orte", "do_not_launch",
"Perform all necessary operations to prepare to launch the application, but do not actually launch it",
false, false, (int)false, &value);
orte_do_not_launch = OPAL_INT_TO_BOOL(value);
mca_base_param_reg_int_name("orte", "daemon_spin",
"Have any orteds spin until we can connect a debugger to them",
false, false, (int)false, &value);
orted_spin_flag = OPAL_INT_TO_BOOL(value);
Cleanly handle the failed start of an orted, or its unexpected failure after start. This commit will allow mpirun to exit cleanly when this occurs, and does a best-effort attempt to cleanup the mess. However, it still has two unresolved issues that need to be eventually addressed: 1. it depends upon the ability of the native environment to alert us that the orted has died/failed to start. I have included that support for SLURM, but other environments need to be done. 2. for some yet-to-be-determined reason, the message that tells the remaining daemons to "die" isn't getting out of the RML, even though no obvious blockage is standing in the way. Work will continue on resolving that problem. For now, the orteds appear to be exiting on their own quite nicely when they see their HNP "lifeline" disappear. This represents the best-available fix for ticket #221 so I am closing that ticket at this time. This commit was SVN r18536.
2008-05-29 17:38:27 +04:00
mca_base_param_reg_int_name("orte", "daemon_fail",
"Have the specified orted fail after init for debugging purposes",
Upgrade the node/orted failure detection code to cover all environments. Use the native environment's capabilities where possible - e.g., SLURM detects orted failure and can report it. Elsewhere, use a heartbeat system to detect orted failure - e.g., for TM and rsh. Heart rate is set via mca param. The HNP checks for callback every 2*heartrate, declares orted failure if not seen in last 2*heartrate time. Also detect orted failed-to-start by setting timeout on launch. Currently only used in TM launcher. Neither detection is enabled by default, but are only active if heartrate is set and/or launch timeout is set. Exception for SLURM as orted failure is always detected and reported. More info to come on devel list. This commit was SVN r18555.
2008-06-03 01:46:34 +04:00
false, false, ORTE_VPID_INVALID, &orted_debug_failure);
Cleanly handle the failed start of an orted, or its unexpected failure after start. This commit will allow mpirun to exit cleanly when this occurs, and does a best-effort attempt to cleanup the mess. However, it still has two unresolved issues that need to be eventually addressed: 1. it depends upon the ability of the native environment to alert us that the orted has died/failed to start. I have included that support for SLURM, but other environments need to be done. 2. for some yet-to-be-determined reason, the message that tells the remaining daemons to "die" isn't getting out of the RML, even though no obvious blockage is standing in the way. Work will continue on resolving that problem. For now, the orteds appear to be exiting on their own quite nicely when they see their HNP "lifeline" disappear. This represents the best-available fix for ticket #221 so I am closing that ticket at this time. This commit was SVN r18536.
2008-05-29 17:38:27 +04:00
Upgrade the node/orted failure detection code to cover all environments. Use the native environment's capabilities where possible - e.g., SLURM detects orted failure and can report it. Elsewhere, use a heartbeat system to detect orted failure - e.g., for TM and rsh. Heart rate is set via mca param. The HNP checks for callback every 2*heartrate, declares orted failure if not seen in last 2*heartrate time. Also detect orted failed-to-start by setting timeout on launch. Currently only used in TM launcher. Neither detection is enabled by default, but are only active if heartrate is set and/or launch timeout is set. Exception for SLURM as orted failure is always detected and reported. More info to come on devel list. This commit was SVN r18555.
2008-06-03 01:46:34 +04:00
mca_base_param_reg_int_name("orte", "daemon_fail_delay",
"Have the specified orted fail after specified number of seconds (default: 0 => no delay)",
false, false, 0, &orted_debug_failure_delay);
mca_base_param_reg_int_name("orte", "startup_timeout",
"Milliseconds/daemon to wait for startup before declaring failed_to_start (default: 0 => do not check)",
false, false, 0, &orte_startup_timeout);
ORTE-level MCA params are defined in several places. Ompi_info cannot call orte_init due to an issue with the memory allocator, thus making it impossible for ompi_info to display all of the ORTE-level MCA params. By consolidating them all into one function, ompi_info can call that function and register the desired variables. This also requires, however, that ompi_info call orte_output_init to avoid generating tons of error messages, so make that adjustment too. Fixes ticket #1314 In addition, orte_output has a race condition issue whereby calls to orte_output/verbose can occur prior to either the RML being defined/setup, or the HNP being defined. This latter occurs during the initialization of the orte_process_info structure. In both cases, there is no way orte_output can send the output to the HNP. Hence, the message must be simply output locally. Fixes ticket #1315 This commit was SVN r18524.
2008-05-28 17:29:58 +04:00
/* check for timing requests */
mca_base_param_reg_int_name("orte", "timing",
"Request that critical timing loops be measured",
false, false, (int)false, &value);
orte_timing = OPAL_INT_TO_BOOL(value);
Continue to refine the timing instrumentation to identify where launch time is being spent This commit was SVN r20244.
2009-01-12 22:12:58 +03:00
mca_base_param_reg_int_name("orte", "timing_details",
"Request that detailed timing data by reported",
false, false, (int)false, &value);
orte_timing_details = OPAL_INT_TO_BOOL(value);
if (orte_timing_details) {
/* ensure the timing flag is set too */
orte_timing = true;
}
ORTE-level MCA params are defined in several places. Ompi_info cannot call orte_init due to an issue with the memory allocator, thus making it impossible for ompi_info to display all of the ORTE-level MCA params. By consolidating them all into one function, ompi_info can call that function and register the desired variables. This also requires, however, that ompi_info call orte_output_init to avoid generating tons of error messages, so make that adjustment too. Fixes ticket #1314 In addition, orte_output has a race condition issue whereby calls to orte_output/verbose can occur prior to either the RML being defined/setup, or the HNP being defined. This latter occurs during the initialization of the orte_process_info structure. In both cases, there is no way orte_output can send the output to the HNP. Hence, the message must be simply output locally. Fixes ticket #1315 This commit was SVN r18524.
2008-05-28 17:29:58 +04:00
Modify the orte_process_info structure to handle a broader range of process types by replacing the individual booleans with a 32-bit bitmap. Use a set of #define's to define the individual bits, and a set of matching macros to test for them. Update the orte code base to use the macros instead of the booleans. Minor mod to the ompi layer to use the new #define's - just one-line name replacements. This commit was SVN r21144.
2009-05-04 15:07:40 +04:00
if (ORTE_PROC_IS_HNP) {
Continue to improve timing instrumentation. Add ability to store timing data directly to a file instead of just to stdout. This commit was SVN r20229.
2009-01-08 17:27:52 +03:00
char *tmp;
mca_base_param_reg_string_name("orte", "timing_file",
"Name of the file where timing data is to be written (relative or absolute path)",
false, false, NULL, &tmp);
if (orte_timing && NULL == tmp) {
/* send the timing output to stdout */
orte_timing_output = stdout;
} else if (NULL != tmp) {
/* make sure the timing flag is set */
orte_timing = true;
/* send the output to the indicated file */
orte_timing_output = fopen(tmp, "w");
if (NULL == orte_timing_output) {
/* couldn't be opened */
opal_output(0, "File %s could not be opened", tmp);
orte_timing_output = stderr;
}
}
}
ORTE-level MCA params are defined in several places. Ompi_info cannot call orte_init due to an issue with the memory allocator, thus making it impossible for ompi_info to display all of the ORTE-level MCA params. By consolidating them all into one function, ompi_info can call that function and register the desired variables. This also requires, however, that ompi_info call orte_output_init to avoid generating tons of error messages, so make that adjustment too. Fixes ticket #1314 In addition, orte_output has a race condition issue whereby calls to orte_output/verbose can occur prior to either the RML being defined/setup, or the HNP being defined. This latter occurs during the initialization of the orte_process_info structure. In both cases, there is no way orte_output can send the output to the HNP. Hence, the message must be simply output locally. Fixes ticket #1315 This commit was SVN r18524.
2008-05-28 17:29:58 +04:00
/* User-level debugger info string */
mca_base_param_reg_string_name("orte", "base_user_debugger",
"Sequence of user-level debuggers to search for in orterun",
false, false, "totalview @mpirun@ -a @mpirun_args@ : ddt -n @np@ -start @executable@ @executable_argv@ @single_app@ : fxp @mpirun@ -a @mpirun_args@", NULL);
mca_base_param_reg_int_name("orte", "abort_timeout",
"Max time to wait [in secs] before aborting an ORTE operation (default: 1sec)",
false, false, 1, &value);
orte_max_timeout = 1000000.0 * value; /* convert to usec */
mca_base_param_reg_int_name("orte", "timeout_step",
Upgrade the node/orted failure detection code to cover all environments. Use the native environment's capabilities where possible - e.g., SLURM detects orted failure and can report it. Elsewhere, use a heartbeat system to detect orted failure - e.g., for TM and rsh. Heart rate is set via mca param. The HNP checks for callback every 2*heartrate, declares orted failure if not seen in last 2*heartrate time. Also detect orted failed-to-start by setting timeout on launch. Currently only used in TM launcher. Neither detection is enabled by default, but are only active if heartrate is set and/or launch timeout is set. Exception for SLURM as orted failure is always detected and reported. More info to come on devel list. This commit was SVN r18555.
2008-06-03 01:46:34 +04:00
"Time to wait [in usecs/proc] before aborting an ORTE operation (default: 1000 usec/proc)",
false, false, 1000, &orte_timeout_usec_per_proc);
ORTE-level MCA params are defined in several places. Ompi_info cannot call orte_init due to an issue with the memory allocator, thus making it impossible for ompi_info to display all of the ORTE-level MCA params. By consolidating them all into one function, ompi_info can call that function and register the desired variables. This also requires, however, that ompi_info call orte_output_init to avoid generating tons of error messages, so make that adjustment too. Fixes ticket #1314 In addition, orte_output has a race condition issue whereby calls to orte_output/verbose can occur prior to either the RML being defined/setup, or the HNP being defined. This latter occurs during the initialization of the orte_process_info structure. In both cases, there is no way orte_output can send the output to the HNP. Hence, the message must be simply output locally. Fixes ticket #1315 This commit was SVN r18524.
2008-05-28 17:29:58 +04:00
/* default hostfile */
mca_base_param_reg_string_name("orte", "default_hostfile",
"Name of the default hostfile (relative or absolute path)",
Revert r20128. Setting a default hostfile name breaks all the filtering code we added to the system. It would require multiple entries in several places to ensure that, should the default hostfile in fact not exist, the system will still work correctly. Too much complexity - just put the name in the default mca param file iff you actually have a default hostfile. This commit was SVN r20129. The following SVN revision numbers were found above: r20128 --> open-mpi/ompi@ea01da0eee63913a7d3b2cd83135ca20ec14ae14
2008-12-15 20:37:21 +03:00
false, false, NULL, &orte_default_hostfile);
Correct a couple of bugs in the rank_file mapper that were incorrectly assigning vpids. Add a capability to parse the rankfile to extract node information in place of requiring both hostfile and rankfile for non-RM managed environments. The rankfile is -only- parsed for this IF the hostfile and -host options are not given. Otherwise, those are used to establish allocation info as we did before this commit. This commit was SVN r21815.
2009-08-13 20:08:43 +04:00
/* rankfile */
tmp = mca_base_param_reg_string_name("orte", "rankfile",
"Name of the rankfile to be used for mapping processes (relative or absolute path)",
false, false, NULL, NULL);
Do not deprecate the rankfile mca param. This commit was SVN r21900.
2009-08-27 14:40:51 +04:00
mca_base_param_reg_syn_name(tmp, "rmaps", "rank_file_path", false);
Correct a couple of bugs in the rank_file mapper that were incorrectly assigning vpids. Add a capability to parse the rankfile to extract node information in place of requiring both hostfile and rankfile for non-RM managed environments. The rankfile is -only- parsed for this IF the hostfile and -host options are not given. Otherwise, those are used to establish allocation info as we did before this commit. This commit was SVN r21815.
2009-08-13 20:08:43 +04:00
mca_base_param_lookup_string(tmp, &orte_rankfile);
ORTE-level MCA params are defined in several places. Ompi_info cannot call orte_init due to an issue with the memory allocator, thus making it impossible for ompi_info to display all of the ORTE-level MCA params. By consolidating them all into one function, ompi_info can call that function and register the desired variables. This also requires, however, that ompi_info call orte_output_init to avoid generating tons of error messages, so make that adjustment too. Fixes ticket #1314 In addition, orte_output has a race condition issue whereby calls to orte_output/verbose can occur prior to either the RML being defined/setup, or the HNP being defined. This latter occurs during the initialization of the orte_process_info structure. In both cases, there is no way orte_output can send the output to the HNP. Hence, the message must be simply output locally. Fixes ticket #1315 This commit was SVN r18524.
2008-05-28 17:29:58 +04:00
Use this option only on Windows, so protect it with #ifdef __WINDOWS__. This commit was SVN r22701.
2010-02-24 11:50:03 +03:00
#ifdef __WINDOWS__
Add a global option for inputing the head node name for Windows CCP trough command line. This commit was SVN r22688.
2010-02-23 22:42:51 +03:00
mca_base_param_reg_string_name("orte", "ccp_headnode",
Add an mca param to indicate if orte progress threads are to be enabled. Error out if this is given and libevent thread support was not built. This commit was SVN r24089.
2010-11-25 02:28:00 +03:00
"Name of the cluster head node. (For Windows CCP only.)",
false, false,
NULL, &orte_ccp_headnode);
Use this option only on Windows, so protect it with #ifdef __WINDOWS__. This commit was SVN r22701.
2010-02-24 11:50:03 +03:00
#endif
ORTE-level MCA params are defined in several places. Ompi_info cannot call orte_init due to an issue with the memory allocator, thus making it impossible for ompi_info to display all of the ORTE-level MCA params. By consolidating them all into one function, ompi_info can call that function and register the desired variables. This also requires, however, that ompi_info call orte_output_init to avoid generating tons of error messages, so make that adjustment too. Fixes ticket #1314 In addition, orte_output has a race condition issue whereby calls to orte_output/verbose can occur prior to either the RML being defined/setup, or the HNP being defined. This latter occurs during the initialization of the orte_process_info structure. In both cases, there is no way orte_output can send the output to the HNP. Hence, the message must be simply output locally. Fixes ticket #1315 This commit was SVN r18524.
2008-05-28 17:29:58 +04:00
/* whether or not to keep FQDN hostnames */
mca_base_param_reg_int_name("orte", "keep_fqdn_hostnames",
"Whether or not to keep FQDN hostnames [default: no]",
false, false, (int)false, &value);
orte_keep_fqdn_hostnames = OPAL_INT_TO_BOOL(value);
Continue development of regular expression support by implementing it for slurm launches. Works for both initial (cmd line and non-cmd line) and comm_spawn launch. Additional work required to fully enable static port support when using cmd line regular expression launch system. This commit was SVN r21502.
2009-06-24 00:25:38 +04:00
/* whether or not to use regular expressions for launch */
mca_base_param_reg_int_name("orte", "use_regexp",
"Whether or not to use regular expressions for launch [default: no]",
false, false, (int)false, &value);
orte_use_regexp = OPAL_INT_TO_BOOL(value);
Fix a race condition in the IOF and add some new user-requested features: 1. fix a race condition whereby a proc's output could trigger an event prior to the other outputs being setup, thus c ausing the IOF to declare the proc "terminated" too early. This was really rare, but could happen. 2. add a new "timestamp-output" option that timestamp's each line of output 3. add a new "output-filename" option that redirects each proc's output to a separate rank-named file. 4. add a new "xterm" option that redirects the output of the specified ranks to a separate xterm window. This commit was SVN r20392.
2009-01-31 01:47:30 +03:00
/* whether to tag output */
Roll in the revamped IOF subsystem. Per the devel mailing list email, this is a complete rewrite of the iof framework designed to simplify the code for maintainability, and to support features we had planned to do, but were too difficult to implement in the old code. Specifically, the new code: 1. completely and cleanly separates responsibilities between the HNP, orted, and tool components. 2. removes all wireup messaging during launch and shutdown. 3. maintains flow control for stdin to avoid large-scale consumption of memory by orteds when large input files are forwarded. This is done using an xon/xoff protocol. 4. enables specification of stdin recipients on the mpirun cmd line. Allowed options include rank, "all", or "none". Default is rank 0. 5. creates a new MPI_Info key "ompi_stdin_target" that supports the above options for child jobs. Default is "none". 6. adds a new tool "orte-iof" that can connect to a running mpirun and display the output. Cmd line options allow selection of any combination of stdout, stderr, and stddiag. Default is stdout. 7. adds a new mpirun and orte-iof cmd line option "tag-output" that will tag each line of output with process name and stream ident. For example, "[1,0]<stdout>this is output" This is not intended for the 1.3 release as it is a major change requiring considerable soak time. This commit was SVN r19767.
2008-10-18 04:00:49 +04:00
mca_base_param_reg_int_name("orte", "tag_output",
"Tag all output with [job,rank] (default: false)",
false, false, (int) false, &value);
orte_tag_output = OPAL_INT_TO_BOOL(value);
Update the xml support to allow -xml-file foo whereby we redirect all xml formatted output (and ONLY xml formatted output) to a specified file This commit was SVN r21930.
2009-09-02 22:03:10 +04:00
/* if we requested xml output, be sure to tag the output as well */
if (orte_xml_output) {
orte_tag_output = true;
}
Initial work on xml support - allocation and job map outputs completed. More to come. This commit was SVN r18587.
2008-06-05 00:53:12 +04:00
mca_base_param_reg_int_name("orte", "xml_output",
"Display all output in XML format (default: false)",
false, false, (int) false, &value);
orte_xml_output = OPAL_INT_TO_BOOL(value);
Update the xml support to allow -xml-file foo whereby we redirect all xml formatted output (and ONLY xml formatted output) to a specified file This commit was SVN r21930.
2009-09-02 22:03:10 +04:00
mca_base_param_reg_string_name("orte", "xml_file",
"Provide all output in XML format to the specified file",
false, false, NULL, &strval);
if (NULL != strval) {
if (ORTE_PROC_IS_HNP && NULL == orte_xml_fp) {
/* only the HNP opens this file! Make sure it only happens once */
orte_xml_fp = fopen(strval, "w");
if (NULL == orte_xml_fp) {
opal_output(0, "Could not open specified xml output file: %s", strval);
return ORTE_ERROR;
}
}
/* ensure we set the flags to tag output */
orte_xml_output = true;
Implement the xml formatted output of stdout/err/diag. Force -tag-output if -xml is set. This commit was SVN r20302.
2009-01-20 19:58:31 +03:00
orte_tag_output = true;
Update the xml support to allow -xml-file foo whereby we redirect all xml formatted output (and ONLY xml formatted output) to a specified file This commit was SVN r21930.
2009-09-02 22:03:10 +04:00
} else {
/* default to stdout */
orte_xml_fp = stdout;
Implement the xml formatted output of stdout/err/diag. Force -tag-output if -xml is set. This commit was SVN r20302.
2009-01-20 19:58:31 +03:00
}
Update the xml support to allow -xml-file foo whereby we redirect all xml formatted output (and ONLY xml formatted output) to a specified file This commit was SVN r21930.
2009-09-02 22:03:10 +04:00
Fix a race condition in the IOF and add some new user-requested features: 1. fix a race condition whereby a proc's output could trigger an event prior to the other outputs being setup, thus c ausing the IOF to declare the proc "terminated" too early. This was really rare, but could happen. 2. add a new "timestamp-output" option that timestamp's each line of output 3. add a new "output-filename" option that redirects each proc's output to a separate rank-named file. 4. add a new "xterm" option that redirects the output of the specified ranks to a separate xterm window. This commit was SVN r20392.
2009-01-31 01:47:30 +03:00
/* whether to timestamp output */
mca_base_param_reg_int_name("orte", "timestamp_output",
"Timestamp all application process output (default: false)",
false, false, (int) false, &value);
orte_timestamp_output = OPAL_INT_TO_BOOL(value);
/* redirect output into files */
mca_base_param_reg_string_name("orte", "output_filename",
"Redirect output from application processes into filename.rank [default: NULL]",
false, false, NULL, &orte_output_filename);
Per request from IBM/Eclipse, provide MCA param to request output when nodes are resolved to a different nodename. This really only happens for the node that mpirun executes on, but they need the alert so they can do string matching of node names. This commit was SVN r20032.
2008-11-24 22:57:08 +03:00
mca_base_param_reg_int_name("orte", "show_resolved_nodenames",
"Display any node names that are resolved to a different name (default: false)",
false, false, (int) false, &value);
orte_show_resolved_nodenames = OPAL_INT_TO_BOOL(value);
It is okay for us to init the ORTE mca params multiple times. Indeed, it is absolutely required by orterun as the first time has to be done prior to parsing the command line, which means that the mca values haven't been parsed yet! Add ability for sys admins to prohibit putting session directories under specified locations. Thus, they can now protect parallel file systems from foolish user mistakes. This commit was SVN r18721.
2008-06-24 21:50:56 +04:00
mca_base_param_reg_int_name("orte", "hetero_apps",
"Indicates that multiple app_contexts are being provided that are a mix of 32/64 bit binaries (default: false)",
false, false, (int) false, &value);
orte_hetero_apps = OPAL_INT_TO_BOOL(value);
Per the July technical meeting: Standardize the handling of the orte launch agent option across PLMs. This has been a consistent complaint I have received - each PLM would register its own MCA param to get input on the launch agent for remote nodes (in fact, one or two didn't, but most did). This would then get handled in various and contradictory ways. Some PLMs would accept only a one-word input. Others accepted multi-word args such as "valgrind orted", but then some would error by putting any prefix specified on the cmd line in front of the incorrect argument. For example, while using the rsh launcher, if you specified "valgrind orted" as your launch agent and had "--prefix foo" on you cmd line, you would attempt to execute "ssh foo/valgrind orted" - which obviously wouldn't work. This was all -very- confusing to users, who had to know which PLM was being used so they could even set the right mca param in the first place! And since we don't warn about non-recognized or non-used mca params, half of the time they would wind up not doing what they thought they were telling us to do. To solve this problem, we did the following: 1. removed all mca params from the individual plms for the launch agent 2. added a new mca param "orte_launch_agent" for this purpose. To further simplify for users, this comes with a new cmd line option "--launch-agent" that can take a multi-word string argument. The value of the param defaults to "orted". 3. added a PLM base function that processes the orte_launch_agent value and adds the contents to a provided argv array. This can subsequently be harvested at-will to handle multi-word values 4. modified the PLMs to use this new function. All the PLMs except for the rsh PLM required very minor change - just called the function and moved on. The rsh PLM required much larger changes as - because of the rsh/ssh cmd line limitations - we had to correctly prepend any provided prefix to the correct argv entry. 5. added a new opal_argv_join_range function that allows the caller to "join" argv entries between two specified indices Please let me know of any problems. I tried to make this as clean as possible, but cannot compile all PLMs to ensure all is correct. This commit was SVN r19097.
2008-07-30 22:26:24 +04:00
/* allow specification of the launch agent */
mca_base_param_reg_string_name("orte", "launch_agent",
"Command used to start processes on remote nodes (default: orted)",
false, false, "orted", &orte_launch_agent);
Establish an MCA param "orte_allocation_required" so that a system can require the user have an RM-provided allocation in order to run. This helps prevent the problem where a user forgets to get an allocation on an RM-managed cluster, and then executes mpirun on the head node - thus causing all of their mpi procs to launch on the head node, usually bringing it to its knees. Since OMPI allows mpirun to default to the local node, and since users want to retain the option to co-locate procs with mpirun, we needed another param to block this error case. This commit was SVN r19135.
2008-08-04 18:25:19 +04:00
/* whether or not to require RM allocation */
mca_base_param_reg_int_name("orte", "allocation_required",
"Whether or not an allocation by a resource manager is required [default: no]",
false, false, (int)false, &value);
orte_allocation_required = OPAL_INT_TO_BOOL(value);
Add the ability to forward SIGTSTP (converted to SIGSTOP) and SIGCONT to the a.outs. By default, they are not forwarded and the behavior remains as it has always been. However, if one runs with --mca orte_forward_job_control 1, then mpirun will catch those two signals and forward them to the orteds which will deliver them to the a.outs. We have had requests for this feature. This commit was SVN r20391.
2009-01-30 21:50:10 +03:00
Fix a race condition in the IOF and add some new user-requested features: 1. fix a race condition whereby a proc's output could trigger an event prior to the other outputs being setup, thus c ausing the IOF to declare the proc "terminated" too early. This was really rare, but could happen. 2. add a new "timestamp-output" option that timestamp's each line of output 3. add a new "output-filename" option that redirects each proc's output to a separate rank-named file. 4. add a new "xterm" option that redirects the output of the specified ranks to a separate xterm window. This commit was SVN r20392.
2009-01-31 01:47:30 +03:00
/* generate new terminal windows to display output from specified ranks */
mca_base_param_reg_string_name("orte", "xterm",
"Create a new xterm window and display output from the specified ranks there [default: none]",
false, false, NULL, &orte_xterm);
Add the ability to forward SIGTSTP (converted to SIGSTOP) and SIGCONT to the a.outs. By default, they are not forwarded and the behavior remains as it has always been. However, if one runs with --mca orte_forward_job_control 1, then mpirun will catch those two signals and forward them to the orteds which will deliver them to the a.outs. We have had requests for this feature. This commit was SVN r20391.
2009-01-30 21:50:10 +03:00
/* whether or not to forward SIGTSTP and SIGCONT signals */
mca_base_param_reg_int_name("orte", "forward_job_control",
"Forward SIGTSTP (after converting to SIGSTOP) and SIGCONT signals to the application procs [default: no]",
false, false,
(int) false, &value);
orte_forward_job_control = OPAL_INT_TO_BOOL(value);
Enable comm_spawn of slave processes, currently only active for the rsh, slurm, and tm environments. Establish support for local rsh environments in the plm/base so that rsh of local slaves can be done by any environment that supports it. Create new orte_rsh_agent param so users can specify rsh agent from outside of rsh plm, and sym link that to the old plm_rsh_agent and pls_rsh_agent options. Modify the orte-bootproxy to pass prefix for the remote slave to support hetero/hybrid scenarios This commit was SVN r20492.
2009-02-09 23:44:44 +03:00
/* local rsh/ssh launch agent */
tmp = mca_base_param_reg_string_name("orte", "rsh_agent",
"The command used to launch executables on remote nodes (typically either \"ssh\" or \"rsh\")",
false, false, "ssh : rsh", NULL);
mca_base_param_reg_syn_name(tmp, "pls", "rsh_agent", true);
mca_base_param_reg_syn_name(tmp, "plm", "rsh_agent", true);
mca_base_param_lookup_string(tmp, &orte_rsh_agent);
Add the ability to directly launch procs via rsh/ssh. Collect common functions in plm/base. Create a new global param to set assume_same_shell, alias'd back to plm_rsh_assume_same_shell (not deprecated). This commit was SVN r21328.
2009-05-30 05:10:25 +04:00
tmp = mca_base_param_reg_int_name("orte", "assume_same_shell",
"If set to 1, assume that the shell on the remote node is the same as the shell on the local node. Otherwise, probe for what the remote shell [default: 1]",
false, false, 1, NULL);
mca_base_param_reg_syn_name(tmp, "plm", "rsh_assume_same_shell", true);
mca_base_param_lookup_int(tmp, &value);
orte_assume_same_shell = OPAL_INT_TO_BOOL(value);
Enable comm_spawn of slave processes, currently only active for the rsh, slurm, and tm environments. Establish support for local rsh environments in the plm/base so that rsh of local slaves can be done by any environment that supports it. Create new orte_rsh_agent param so users can specify rsh agent from outside of rsh plm, and sym link that to the old plm_rsh_agent and pls_rsh_agent options. Modify the orte-bootproxy to pass prefix for the remote slave to support hetero/hybrid scenarios This commit was SVN r20492.
2009-02-09 23:44:44 +03:00
Provide a "progress meter" for launch that outputs progress as we are launching, especially on large jobs. Also, provide a timeout mechanism so that we cleanly abort if we don't get a response from the next daemon in a specified time. This commit was SVN r21359.
2009-06-03 03:52:02 +04:00
/* whether or not to report launch progress */
mca_base_param_reg_int_name("orte", "report_launch_progress",
"Output a brief periodic report on launch progress [default: no]",
false, false,
(int) false, &value);
orte_report_launch_progress = OPAL_INT_TO_BOOL(value);
if (orte_report_launch_progress) {
/* ensure the startup timeout is set to something reasonable */
if (0 == orte_startup_timeout) {
orte_startup_timeout = 2000; /* default to 2 seconds */
}
}
Modify the OMPI paffinity and mapping system to support socket-level mapping and binding. Mostly refactors existing code, with modifications to the odls_default module to support the new capabilities. Adds several new mpirun options: * -bysocket - assign ranks on a node by socket. Effectively load balances the procs assigned to a node across the available sockets. Note that ranks can still be bound to a specific core within the socket, or to the entire socket - the mapping is independent of the binding. * -bind-to-socket - bind each rank to all the cores on the socket to which they are assigned. * -bind-to-core - currently the default behavior (maintained from prior default) * -npersocket N - launch N procs for every socket on a node. Note that this implies we know how many sockets are on a node. Mpirun will determine its local values. These can be overridden by provided values, either via MCA param or in a hostfile Similar features/options are provided at the board level for multi-board nodes. Documentation to follow... This commit was SVN r21791.
2009-08-11 06:51:27 +04:00
Added new solaris sysinfo module. Also added code to assign orte_local_chip_type and orte_local_chip_model in MPI processes it the appropriate sysinfo module found the values on the machine. This commit was SVN r23581.
2010-08-09 23:28:56 +04:00
/* cluster hardware info detected by orte only */
mca_base_param_reg_string_name("orte", "cpu_type",
corrected a couple places in orte where it said cpu_model when it should have been cpu_type. This commit was SVN r24221.
2011-01-11 22:56:26 +03:00
"cpu type detected in node",
Added new solaris sysinfo module. Also added code to assign orte_local_chip_type and orte_local_chip_model in MPI processes it the appropriate sysinfo module found the values on the machine. This commit was SVN r23581.
2010-08-09 23:28:56 +04:00
true, false, NULL, &orte_local_cpu_type);
mca_base_param_reg_string_name("orte", "cpu_model",
"cpu model detected in node",
true, false, NULL, &orte_local_cpu_model);
Modify the OMPI paffinity and mapping system to support socket-level mapping and binding. Mostly refactors existing code, with modifications to the odls_default module to support the new capabilities. Adds several new mpirun options: * -bysocket - assign ranks on a node by socket. Effectively load balances the procs assigned to a node across the available sockets. Note that ranks can still be bound to a specific core within the socket, or to the entire socket - the mapping is independent of the binding. * -bind-to-socket - bind each rank to all the cores on the socket to which they are assigned. * -bind-to-core - currently the default behavior (maintained from prior default) * -npersocket N - launch N procs for every socket on a node. Note that this implies we know how many sockets are on a node. Mpirun will determine its local values. These can be overridden by provided values, either via MCA param or in a hostfile Similar features/options are provided at the board level for multi-board nodes. Documentation to follow... This commit was SVN r21791.
2009-08-11 06:51:27 +04:00
/* cluster hardware info */
mca_base_param_reg_int_name("orte", "num_boards",
"Number of processor boards/node (1-256) [default: 1]",
false, false, 1, &value);
orte_default_num_boards = (uint8_t)value;
Some (hopefully final!) adjustments and corrections to the paffinity support: 1. default -npersocket to force -bind-to-socket 2. if we cannot get a value for cores/socket, try using #logical cpus. otherwise, default to 1 core 3. add missing error message for not-enough-processors 4. since we no longer loop through orte_register_params twice, put the auto-detect of topology info in the rte_init for hnp and std_orted 5. fix bind-to-core, bysocket combination This commit was SVN r21992.
2009-09-22 19:41:03 +04:00
Modify the OMPI paffinity and mapping system to support socket-level mapping and binding. Mostly refactors existing code, with modifications to the odls_default module to support the new capabilities. Adds several new mpirun options: * -bysocket - assign ranks on a node by socket. Effectively load balances the procs assigned to a node across the available sockets. Note that ranks can still be bound to a specific core within the socket, or to the entire socket - the mapping is independent of the binding. * -bind-to-socket - bind each rank to all the cores on the socket to which they are assigned. * -bind-to-core - currently the default behavior (maintained from prior default) * -npersocket N - launch N procs for every socket on a node. Note that this implies we know how many sockets are on a node. Mpirun will determine its local values. These can be overridden by provided values, either via MCA param or in a hostfile Similar features/options are provided at the board level for multi-board nodes. Documentation to follow... This commit was SVN r21791.
2009-08-11 06:51:27 +04:00
mca_base_param_reg_int_name("orte", "num_sockets",
Some (hopefully final!) adjustments and corrections to the paffinity support: 1. default -npersocket to force -bind-to-socket 2. if we cannot get a value for cores/socket, try using #logical cpus. otherwise, default to 1 core 3. add missing error message for not-enough-processors 4. since we no longer loop through orte_register_params twice, put the auto-detect of topology info in the rte_init for hnp and std_orted 5. fix bind-to-core, bysocket combination This commit was SVN r21992.
2009-09-22 19:41:03 +04:00
"Number of sockets/board (1-256)",
false, false, 0, &value);
Modify the OMPI paffinity and mapping system to support socket-level mapping and binding. Mostly refactors existing code, with modifications to the odls_default module to support the new capabilities. Adds several new mpirun options: * -bysocket - assign ranks on a node by socket. Effectively load balances the procs assigned to a node across the available sockets. Note that ranks can still be bound to a specific core within the socket, or to the entire socket - the mapping is independent of the binding. * -bind-to-socket - bind each rank to all the cores on the socket to which they are assigned. * -bind-to-core - currently the default behavior (maintained from prior default) * -npersocket N - launch N procs for every socket on a node. Note that this implies we know how many sockets are on a node. Mpirun will determine its local values. These can be overridden by provided values, either via MCA param or in a hostfile Similar features/options are provided at the board level for multi-board nodes. Documentation to follow... This commit was SVN r21791.
2009-08-11 06:51:27 +04:00
orte_default_num_sockets_per_board = (uint8_t)value;
Some (hopefully final!) adjustments and corrections to the paffinity support: 1. default -npersocket to force -bind-to-socket 2. if we cannot get a value for cores/socket, try using #logical cpus. otherwise, default to 1 core 3. add missing error message for not-enough-processors 4. since we no longer loop through orte_register_params twice, put the auto-detect of topology info in the rte_init for hnp and std_orted 5. fix bind-to-core, bysocket combination This commit was SVN r21992.
2009-09-22 19:41:03 +04:00
Modify the OMPI paffinity and mapping system to support socket-level mapping and binding. Mostly refactors existing code, with modifications to the odls_default module to support the new capabilities. Adds several new mpirun options: * -bysocket - assign ranks on a node by socket. Effectively load balances the procs assigned to a node across the available sockets. Note that ranks can still be bound to a specific core within the socket, or to the entire socket - the mapping is independent of the binding. * -bind-to-socket - bind each rank to all the cores on the socket to which they are assigned. * -bind-to-core - currently the default behavior (maintained from prior default) * -npersocket N - launch N procs for every socket on a node. Note that this implies we know how many sockets are on a node. Mpirun will determine its local values. These can be overridden by provided values, either via MCA param or in a hostfile Similar features/options are provided at the board level for multi-board nodes. Documentation to follow... This commit was SVN r21791.
2009-08-11 06:51:27 +04:00
mca_base_param_reg_int_name("orte", "num_cores",
Some (hopefully final!) adjustments and corrections to the paffinity support: 1. default -npersocket to force -bind-to-socket 2. if we cannot get a value for cores/socket, try using #logical cpus. otherwise, default to 1 core 3. add missing error message for not-enough-processors 4. since we no longer loop through orte_register_params twice, put the auto-detect of topology info in the rte_init for hnp and std_orted 5. fix bind-to-core, bysocket combination This commit was SVN r21992.
2009-09-22 19:41:03 +04:00
"Number of cores/socket (1-256)",
false, false, 0, &value);
Modify the OMPI paffinity and mapping system to support socket-level mapping and binding. Mostly refactors existing code, with modifications to the odls_default module to support the new capabilities. Adds several new mpirun options: * -bysocket - assign ranks on a node by socket. Effectively load balances the procs assigned to a node across the available sockets. Note that ranks can still be bound to a specific core within the socket, or to the entire socket - the mapping is independent of the binding. * -bind-to-socket - bind each rank to all the cores on the socket to which they are assigned. * -bind-to-core - currently the default behavior (maintained from prior default) * -npersocket N - launch N procs for every socket on a node. Note that this implies we know how many sockets are on a node. Mpirun will determine its local values. These can be overridden by provided values, either via MCA param or in a hostfile Similar features/options are provided at the board level for multi-board nodes. Documentation to follow... This commit was SVN r21791.
2009-08-11 06:51:27 +04:00
orte_default_num_cores_per_socket = (uint8_t)value;
/* cpu allocation specification */
mca_base_param_reg_string_name("orte", "cpu_set",
"Comma-separated list of ranges specifying logical cpus allocated to this job [default: none]",
false, false, NULL, &orte_default_cpu_set);
/* binding specification - this will be overridden by any cmd line directive, and
* ignored unless opal_paffinity_alone is set
*/
Add an mca param to indicate if orte progress threads are to be enabled. Error out if this is given and libevent thread support was not built. This commit was SVN r24089.
2010-11-25 02:28:00 +03:00
mca_base_param_reg_string_name("orte", "process_binding",
"Policy for binding processes [none | core | socket | board] (supported qualifier: if-avail)",
false, false, NULL, &strval);
if (NULL != strval) {
Modify the paffinity system to handle binding directives that are "soft" - i.e., when someone directs that we bind if the system supports it. This allows community members to distribute OMPI with default MCA param files that direct general binding policies, without having the distributed software fail if the system cannot support those policies. The new options work by adding an ":if-avail" qualifier to the "bind-to-socket" and "bind-to-core" MCA params. If the system does not support this capability, the job will launch anyway. Without the qualifier, the job will abort with an error message indicating that the required functionality is not supported on this system. This commit was SVN r21975.
2009-09-18 23:48:42 +04:00
if (0 == strcasecmp(strval, "none")) {
/* no binding */
ORTE_SET_BINDING_POLICY(ORTE_BIND_TO_NONE);
} else {
binding = 0;
params = opal_argv_split(strval, ':');
Final cleanup on new paffinity "if-avail" messages, plus fix one bug reported by Terry This commit was SVN r21978.
2009-09-19 21:43:21 +04:00
if (1 < opal_argv_count(params)) {
Modify the paffinity system to handle binding directives that are "soft" - i.e., when someone directs that we bind if the system supports it. This allows community members to distribute OMPI with default MCA param files that direct general binding policies, without having the distributed software fail if the system cannot support those policies. The new options work by adding an ":if-avail" qualifier to the "bind-to-socket" and "bind-to-core" MCA params. If the system does not support this capability, the job will launch anyway. Without the qualifier, the job will abort with an error message indicating that the required functionality is not supported on this system. This commit was SVN r21975.
2009-09-18 23:48:42 +04:00
if (0 != strcasecmp(params[1], "if-avail")) {
/* unknown option */
opal_output(0, "Unknown qualifier to orte_process_binding: %s", strval);
return ORTE_ERR_BAD_PARAM;
}
binding = ORTE_BIND_IF_SUPPORTED;
}
Final cleanup on new paffinity "if-avail" messages, plus fix one bug reported by Terry This commit was SVN r21978.
2009-09-19 21:43:21 +04:00
if (0 == strcasecmp(params[0], "socket")) {
Modify the paffinity system to handle binding directives that are "soft" - i.e., when someone directs that we bind if the system supports it. This allows community members to distribute OMPI with default MCA param files that direct general binding policies, without having the distributed software fail if the system cannot support those policies. The new options work by adding an ":if-avail" qualifier to the "bind-to-socket" and "bind-to-core" MCA params. If the system does not support this capability, the job will launch anyway. Without the qualifier, the job will abort with an error message indicating that the required functionality is not supported on this system. This commit was SVN r21975.
2009-09-18 23:48:42 +04:00
ORTE_SET_BINDING_POLICY(ORTE_BIND_TO_SOCKET | binding);
Final cleanup on new paffinity "if-avail" messages, plus fix one bug reported by Terry This commit was SVN r21978.
2009-09-19 21:43:21 +04:00
} else if (0 == strcasecmp(params[0], "board")) {
Modify the paffinity system to handle binding directives that are "soft" - i.e., when someone directs that we bind if the system supports it. This allows community members to distribute OMPI with default MCA param files that direct general binding policies, without having the distributed software fail if the system cannot support those policies. The new options work by adding an ":if-avail" qualifier to the "bind-to-socket" and "bind-to-core" MCA params. If the system does not support this capability, the job will launch anyway. Without the qualifier, the job will abort with an error message indicating that the required functionality is not supported on this system. This commit was SVN r21975.
2009-09-18 23:48:42 +04:00
ORTE_SET_BINDING_POLICY(ORTE_BIND_TO_BOARD | binding);
Final cleanup on new paffinity "if-avail" messages, plus fix one bug reported by Terry This commit was SVN r21978.
2009-09-19 21:43:21 +04:00
} else if (0 == strcasecmp(params[0], "core")) {
Modify the paffinity system to handle binding directives that are "soft" - i.e., when someone directs that we bind if the system supports it. This allows community members to distribute OMPI with default MCA param files that direct general binding policies, without having the distributed software fail if the system cannot support those policies. The new options work by adding an ":if-avail" qualifier to the "bind-to-socket" and "bind-to-core" MCA params. If the system does not support this capability, the job will launch anyway. Without the qualifier, the job will abort with an error message indicating that the required functionality is not supported on this system. This commit was SVN r21975.
2009-09-18 23:48:42 +04:00
ORTE_SET_BINDING_POLICY(ORTE_BIND_TO_CORE | binding);
}
Modify the OMPI paffinity and mapping system to support socket-level mapping and binding. Mostly refactors existing code, with modifications to the odls_default module to support the new capabilities. Adds several new mpirun options: * -bysocket - assign ranks on a node by socket. Effectively load balances the procs assigned to a node across the available sockets. Note that ranks can still be bound to a specific core within the socket, or to the entire socket - the mapping is independent of the binding. * -bind-to-socket - bind each rank to all the cores on the socket to which they are assigned. * -bind-to-core - currently the default behavior (maintained from prior default) * -npersocket N - launch N procs for every socket on a node. Note that this implies we know how many sockets are on a node. Mpirun will determine its local values. These can be overridden by provided values, either via MCA param or in a hostfile Similar features/options are provided at the board level for multi-board nodes. Documentation to follow... This commit was SVN r21791.
2009-08-11 06:51:27 +04:00
}
}
Revise the new binding system slightly: 1. finalize the logic for properly respecting externally assigned bindings. Thanks to Chris Samuel for his help with this. Still needs some acid testing, but appears to now work. 2. remove the double-logic of requiring opal_paffinity_alone AND bind-to-foo. If the user specifies bind-to-foo, trust her and just do it. This commit was SVN r21885.
2009-08-26 06:01:49 +04:00
/* if nothing was set, but opal_paffinity_alone is set, then default
* to bind-to-core
*/
if (opal_paffinity_alone) {
ORTE_XSET_BINDING_POLICY(ORTE_BIND_TO_CORE);
}
Instead of an odls-base mca param, make report_bindings a global param so that we can (a) detect it was set in the plm, and then (b) ensure it gets passed along to remote orteds so they will comply with the request. This commit was SVN r22021.
2009-09-28 07:17:15 +04:00
/* whether or not to report bindings */
mca_base_param_reg_int_name("orte", "report_bindings",
"Report bindings",
false, false,
(int) false, &value);
orte_report_bindings = OPAL_INT_TO_BOOL(value);
Enable a new command line option to --report-events that instructs mpirun to RML-report specific events during job life to the requestor. This commit was SVN r21954.
2009-09-09 09:28:45 +04:00
/* tool communication controls */
mca_base_param_reg_string_name("orte", "report_events",
"URI to which events are to be reported (default: NULL)]",
false, false, NULL, &orte_report_events_uri);
if (NULL != orte_report_events_uri) {
orte_report_events = true;
}
The ability to add procs to a running job was unfortunately borked when we added the detection of a proc exiting before calling init. Re-enable it here, ensuring that procs that are being restarted and/or added to a job do -not- call barrier during orte_init. This commit was SVN r22404.
2010-01-14 20:59:42 +03:00
/* barrier control */
mca_base_param_reg_int_name("orte", "do_not_barrier",
"Do not barrier in orte_init",
true, false,
(int) false, &value);
orte_do_not_barrier = OPAL_INT_TO_BOOL(value);
Restore process recovery for procs local to mpirun (first step towards restoring full capability). Define three new MCA params: 1. orte_enable_recovery - default recovery policy, can be overridden on a per-job basis 2. orte_max_local_restarts - default max number of local restarts, can be overridden 3. orte_max_global_restarts - default max number of relocates, can be overridden Implement the restart_proc API for the ODLS framework, reorganize the default fns a little to avoid copying code. This commit was SVN r23057.
2010-04-28 08:06:57 +04:00
mca_base_param_reg_int_name("orte", "enable_recovery",
"Enable recovery from process failure [Default = disabled]",
false, false,
(int)false, &value);
orte_enable_recovery = OPAL_INT_TO_BOOL(value);
Remove the distinction between local and global restarts - leave it up to the error strategy to decide which to do. Cleanup the heartbeat handling so it is associated with the proc, not a node. Cleanup handling of recovery options so that defaults do not override user values iff they are provided. This commit was SVN r24382.
2011-02-14 23:49:12 +03:00
mca_base_param_reg_int_name("orte", "max_restarts",
"Max number of times to restart a failed process",
Restore process recovery for procs local to mpirun (first step towards restoring full capability). Define three new MCA params: 1. orte_enable_recovery - default recovery policy, can be overridden on a per-job basis 2. orte_max_local_restarts - default max number of local restarts, can be overridden 3. orte_max_global_restarts - default max number of relocates, can be overridden Implement the restart_proc API for the ODLS framework, reorganize the default fns a little to avoid copying code. This commit was SVN r23057.
2010-04-28 08:06:57 +04:00
false, false,
A max_restarts value of -1 is now valid and indicates infinite restarts, so correct the validity check This commit was SVN r24546.
2011-03-20 04:17:00 +03:00
0, &orte_max_restarts);
if (!orte_enable_recovery && orte_max_restarts != 0) {
Restore process recovery for procs local to mpirun (first step towards restoring full capability). Define three new MCA params: 1. orte_enable_recovery - default recovery policy, can be overridden on a per-job basis 2. orte_max_local_restarts - default max number of local restarts, can be overridden 3. orte_max_global_restarts - default max number of relocates, can be overridden Implement the restart_proc API for the ODLS framework, reorganize the default fns a little to avoid copying code. This commit was SVN r23057.
2010-04-28 08:06:57 +04:00
if (ORTE_PROC_IS_HNP) {
opal_output(orte_clean_output,
"------------------------------------------------------------------\n"
Some relatively minor C/R related cleanup * Fix a configure warning for checking --enable-ft-thread * In hnp and orted ErrMgr components check to see if other components have already recovered this process before trying to recover it again. * Fix 'npernode' for restarting using the resilient rmaps component * export ompi_info_set, so that internal functionality can use it. This commit was SVN r23535.
2010-07-30 22:59:34 +04:00
"The MCA param orte_enable_recovery was not set to true, but\n"
A max_restarts value of -1 is now valid and indicates infinite restarts, so correct the validity check This commit was SVN r24546.
2011-03-20 04:17:00 +03:00
"a value was provided for the number of restarts:\n\n"
Remove the distinction between local and global restarts - leave it up to the error strategy to decide which to do. Cleanup the heartbeat handling so it is associated with the proc, not a node. Cleanup handling of recovery options so that defaults do not override user values iff they are provided. This commit was SVN r24382.
2011-02-14 23:49:12 +03:00
"Max restarts: %d\n"
Restore process recovery for procs local to mpirun (first step towards restoring full capability). Define three new MCA params: 1. orte_enable_recovery - default recovery policy, can be overridden on a per-job basis 2. orte_max_local_restarts - default max number of local restarts, can be overridden 3. orte_max_global_restarts - default max number of relocates, can be overridden Implement the restart_proc API for the ODLS framework, reorganize the default fns a little to avoid copying code. This commit was SVN r23057.
2010-04-28 08:06:57 +04:00
"We are enabling process recovery and continuing execution. To avoid\n"
Some relatively minor C/R related cleanup * Fix a configure warning for checking --enable-ft-thread * In hnp and orted ErrMgr components check to see if other components have already recovered this process before trying to recover it again. * Fix 'npernode' for restarting using the resilient rmaps component * export ompi_info_set, so that internal functionality can use it. This commit was SVN r23535.
2010-07-30 22:59:34 +04:00
"this warning in the future, please set the orte_enable_recovery\n"
Restore process recovery for procs local to mpirun (first step towards restoring full capability). Define three new MCA params: 1. orte_enable_recovery - default recovery policy, can be overridden on a per-job basis 2. orte_max_local_restarts - default max number of local restarts, can be overridden 3. orte_max_global_restarts - default max number of relocates, can be overridden Implement the restart_proc API for the ODLS framework, reorganize the default fns a little to avoid copying code. This commit was SVN r23057.
2010-04-28 08:06:57 +04:00
"param to non-zero.\n"
"------------------------------------------------------------------",
Remove the distinction between local and global restarts - leave it up to the error strategy to decide which to do. Cleanup the heartbeat handling so it is associated with the proc, not a node. Cleanup handling of recovery options so that defaults do not override user values iff they are provided. This commit was SVN r24382.
2011-02-14 23:49:12 +03:00
orte_max_restarts);
Restore process recovery for procs local to mpirun (first step towards restoring full capability). Define three new MCA params: 1. orte_enable_recovery - default recovery policy, can be overridden on a per-job basis 2. orte_max_local_restarts - default max number of local restarts, can be overridden 3. orte_max_global_restarts - default max number of relocates, can be overridden Implement the restart_proc API for the ODLS framework, reorganize the default fns a little to avoid copying code. This commit was SVN r23057.
2010-04-28 08:06:57 +04:00
}
orte_enable_recovery = true;
}
Per off-list discussion, implement the new OMPI exit status policy (soon to be on wiki) and further cleanup error reporting to cover new cases. Implement process migration when failed nodes are detected. Some testing still required This commit was SVN r23121.
2010-05-12 22:11:58 +04:00
mca_base_param_reg_int_name("orte", "report_child_jobs_separately",
"Return the exit status of the primary job only",
false, false,
(int)false, &value);
orte_report_child_jobs_separately = OPAL_INT_TO_BOOL(value);
Restore process recovery for procs local to mpirun (first step towards restoring full capability). Define three new MCA params: 1. orte_enable_recovery - default recovery policy, can be overridden on a per-job basis 2. orte_max_local_restarts - default max number of local restarts, can be overridden 3. orte_max_global_restarts - default max number of relocates, can be overridden Implement the restart_proc API for the ODLS framework, reorganize the default fns a little to avoid copying code. This commit was SVN r23057.
2010-04-28 08:06:57 +04:00
Per off-list discussion, implement the new OMPI exit status policy (soon to be on wiki) and further cleanup error reporting to cover new cases. Implement process migration when failed nodes are detected. Some testing still required This commit was SVN r23121.
2010-05-12 22:11:58 +04:00
mca_base_param_reg_int_name("orte", "child_time_to_exit",
"Max time a spawned child job is allowed to run after the primary job has terminated (seconds)",
false, false,
INT_MAX, &value);
orte_child_time_to_exit.tv_sec = value;
orte_child_time_to_exit.tv_usec = 0;
Add an mca param to indicate if orte progress threads are to be enabled. Error out if this is given and libevent thread support was not built. This commit was SVN r24089.
2010-11-25 02:28:00 +03:00
Forgot that Terry wanted to control the vm launch with an mca param - set one up for that purpose This commit was SVN r24525.
2011-03-13 03:46:42 +03:00
mca_base_param_reg_int_name("orte", "vm_launch",
"Launch daemons on all nodes at start to form a virtual machine for subsequent jobs",
false, false, (int)false, &value);
orte_vm_launch = OPAL_INT_TO_BOOL(value);
Complete implementation of the --without-rte-support configure option. Working with Brian, this has been tested on RedStorm. Some minor changes to help facilitate debugger support so that both mpirun and yod can operate with it. Still to be completed. This commit was SVN r18664.
2008-06-18 07:15:56 +04:00
#endif /* ORTE_DISABLE_FULL_SUPPORT */
ORTE-level MCA params are defined in several places. Ompi_info cannot call orte_init due to an issue with the memory allocator, thus making it impossible for ompi_info to display all of the ORTE-level MCA params. By consolidating them all into one function, ompi_info can call that function and register the desired variables. This also requires, however, that ompi_info call orte_output_init to avoid generating tons of error messages, so make that adjustment too. Fixes ticket #1314 In addition, orte_output has a race condition issue whereby calls to orte_output/verbose can occur prior to either the RML being defined/setup, or the HNP being defined. This latter occurs during the initialization of the orte_process_info structure. In both cases, there is no way orte_output can send the output to the HNP. Hence, the message must be simply output locally. Fixes ticket #1315 This commit was SVN r18524.
2008-05-28 17:29:58 +04:00
return ORTE_SUCCESS;
}
Копировать постоянную ссылку