1
1
openmpi/config/ompi_setup_fc.m4

243 строки
10 KiB
Plaintext
Исходник Обычный вид История

== Highlights == 1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler 1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release 1. The mpi module has been re-implemented and is significantly "mo' bettah" 1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk. == More details == Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7. Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey: * Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort) * The Fortran J3 committee * Tobias Burnus/gfortran * Tony !Goetz/Absoft * Terry !Donte/Oracle * ...and probably others whom I'm forgetting :-( There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax. Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time. As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory: {{{ ompi/mpi/fortran/ base/ - glue code mpif-h/ - what used to be ompi/mpi/f77 use-mpi-tkr/ - what used to be ompi/mpi/f90 use-mpi-ignore-tkr/ - new mpi module implementation use-mpi-f08/ - new mpi_f08 module implementation }}} There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version. Other things that were done: * ompi_info grew a few new output fields to describe what level of Fortran support is included * Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added * The old Fortran MPI libraries were renamed: * libmpi_f77 -> libmpi_mpifh * libmpi_f90 -> libmpi_usempi * The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example: {{{ shell$ ./configure CC=icc CXX=icpc FC=ifort ... }}} All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches). I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed. This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
dnl -*- shell-script -*-
dnl
dnl Copyright (c) 2004-2006 The Trustees of Indiana University and Indiana
dnl University Research and Technology
dnl Corporation. All rights reserved.
dnl Copyright (c) 2004-2005 The University of Tennessee and The University
dnl of Tennessee Research Foundation. All rights
dnl reserved.
dnl Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
dnl University of Stuttgart. All rights reserved.
dnl Copyright (c) 2004-2005 The Regents of the University of California.
dnl All rights reserved.
dnl Copyright (c) 2007 Los Alamos National Security, LLC. All rights
dnl reserved.
dnl Copyright (c) 2007 Sun Microsystems, Inc. All rights reserved.
dnl Copyright (c) 2009-2013 Cisco Systems, Inc. All rights reserved.
== Highlights == 1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler 1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release 1. The mpi module has been re-implemented and is significantly "mo' bettah" 1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk. == More details == Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7. Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey: * Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort) * The Fortran J3 committee * Tobias Burnus/gfortran * Tony !Goetz/Absoft * Terry !Donte/Oracle * ...and probably others whom I'm forgetting :-( There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax. Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time. As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory: {{{ ompi/mpi/fortran/ base/ - glue code mpif-h/ - what used to be ompi/mpi/f77 use-mpi-tkr/ - what used to be ompi/mpi/f90 use-mpi-ignore-tkr/ - new mpi module implementation use-mpi-f08/ - new mpi_f08 module implementation }}} There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version. Other things that were done: * ompi_info grew a few new output fields to describe what level of Fortran support is included * Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added * The old Fortran MPI libraries were renamed: * libmpi_f77 -> libmpi_mpifh * libmpi_f90 -> libmpi_usempi * The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example: {{{ shell$ ./configure CC=icc CXX=icpc FC=ifort ... }}} All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches). I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed. This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
dnl $COPYRIGHT$
dnl
dnl Additional copyrights may follow
dnl
dnl $HEADER$
dnl
dnl OMPI_SETUP_FC
dnl
# This is REQUIREd, below.
AC_DEFUN_ONCE([_OMPI_SETUP_FC_BANNER],[
ompi_show_subtitle "Fortran compiler"
])
#############################################################################
# This is REQUIREd, below.
AC_DEFUN_ONCE([_OMPI_SETUP_FC_COMPILER],[
OPAL_VAR_SCOPE_PUSH([ompi_fcflags_save])
== Highlights == 1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler 1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release 1. The mpi module has been re-implemented and is significantly "mo' bettah" 1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk. == More details == Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7. Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey: * Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort) * The Fortran J3 committee * Tobias Burnus/gfortran * Tony !Goetz/Absoft * Terry !Donte/Oracle * ...and probably others whom I'm forgetting :-( There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax. Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time. As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory: {{{ ompi/mpi/fortran/ base/ - glue code mpif-h/ - what used to be ompi/mpi/f77 use-mpi-tkr/ - what used to be ompi/mpi/f90 use-mpi-ignore-tkr/ - new mpi module implementation use-mpi-f08/ - new mpi_f08 module implementation }}} There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version. Other things that were done: * ompi_info grew a few new output fields to describe what level of Fortran support is included * Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added * The old Fortran MPI libraries were renamed: * libmpi_f77 -> libmpi_mpifh * libmpi_f90 -> libmpi_usempi * The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example: {{{ shell$ ./configure CC=icc CXX=icpc FC=ifort ... }}} All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches). I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed. This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
ompi_fcflags_save="$FCFLAGS"
# Note that AC_PROG_FC will look for *any* fortran compiler, and
# we don't want it to find an F77-only compiler. The AC docs
# don't recommend using the "dialect" feature of AC_PROG_FC, so
# instead use the optional first parameter and steal the list of
# Fortran compilers (excluding the f77 compiler names) from AC's
# default list of compilers and use it here. This is the main
# reason we have an OMPI-ized version of the PROG_FC macro.
AC_PROG_FC([gfortran f95 fort xlf95 ifort ifc efc pgfortran pgf95 lf95 f90 xlf90 pgf90 epcf90])
FCFLAGS="$ompi_fcflags_save"
OPAL_VAR_SCOPE_POP
== Highlights == 1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler 1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release 1. The mpi module has been re-implemented and is significantly "mo' bettah" 1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk. == More details == Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7. Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey: * Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort) * The Fortran J3 committee * Tobias Burnus/gfortran * Tony !Goetz/Absoft * Terry !Donte/Oracle * ...and probably others whom I'm forgetting :-( There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax. Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time. As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory: {{{ ompi/mpi/fortran/ base/ - glue code mpif-h/ - what used to be ompi/mpi/f77 use-mpi-tkr/ - what used to be ompi/mpi/f90 use-mpi-ignore-tkr/ - new mpi module implementation use-mpi-f08/ - new mpi_f08 module implementation }}} There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version. Other things that were done: * ompi_info grew a few new output fields to describe what level of Fortran support is included * Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added * The old Fortran MPI libraries were renamed: * libmpi_f77 -> libmpi_mpifh * libmpi_f90 -> libmpi_usempi * The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example: {{{ shell$ ./configure CC=icc CXX=icpc FC=ifort ... }}} All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches). I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed. This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
])
#############################################################################
# General Fortran compiler setup
AC_DEFUN([OMPI_SETUP_FC],[
OPAL_VAR_SCOPE_PUSH([ompi_fc_happy LDFLAGS_save fc_version])
== Highlights == 1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler 1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release 1. The mpi module has been re-implemented and is significantly "mo' bettah" 1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk. == More details == Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7. Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey: * Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort) * The Fortran J3 committee * Tobias Burnus/gfortran * Tony !Goetz/Absoft * Terry !Donte/Oracle * ...and probably others whom I'm forgetting :-( There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax. Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time. As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory: {{{ ompi/mpi/fortran/ base/ - glue code mpif-h/ - what used to be ompi/mpi/f77 use-mpi-tkr/ - what used to be ompi/mpi/f90 use-mpi-ignore-tkr/ - new mpi module implementation use-mpi-f08/ - new mpi_f08 module implementation }}} There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version. Other things that were done: * ompi_info grew a few new output fields to describe what level of Fortran support is included * Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added * The old Fortran MPI libraries were renamed: * libmpi_f77 -> libmpi_mpifh * libmpi_f90 -> libmpi_usempi * The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example: {{{ shell$ ./configure CC=icc CXX=icpc FC=ifort ... }}} All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches). I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed. This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
# Force the intro banner to be displayed first
AC_REQUIRE([_OMPI_SETUP_FC_BANNER])
# Unfortunately, we must REQUIRE this for the reasons cited in the
# Autoconf (version >= 2.64) docs.
AC_REQUIRE([_OMPI_SETUP_FC_COMPILER])
AS_IF([test -z "$FC"],
[AC_MSG_WARN([*** All Fortran MPI bindings disabled (could not find compiler)])
ompi_fc_happy=0],
[ompi_fc_happy=1])
AS_IF([test $ompi_fc_happy -eq 1 -a "$WANT_DEBUG" = "1" -a "$enable_debug_symbols" != "no"],
[FCFLAGS="$FCFLAGS -g"
OPAL_FLAGS_UNIQ(FCFLAGS)
AC_MSG_WARN([-g has been added to FCFLAGS (--enable-debug)])
])
== Highlights == 1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler 1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release 1. The mpi module has been re-implemented and is significantly "mo' bettah" 1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk. == More details == Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7. Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey: * Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort) * The Fortran J3 committee * Tobias Burnus/gfortran * Tony !Goetz/Absoft * Terry !Donte/Oracle * ...and probably others whom I'm forgetting :-( There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax. Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time. As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory: {{{ ompi/mpi/fortran/ base/ - glue code mpif-h/ - what used to be ompi/mpi/f77 use-mpi-tkr/ - what used to be ompi/mpi/f90 use-mpi-ignore-tkr/ - new mpi module implementation use-mpi-f08/ - new mpi_f08 module implementation }}} There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version. Other things that were done: * ompi_info grew a few new output fields to describe what level of Fortran support is included * Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added * The old Fortran MPI libraries were renamed: * libmpi_f77 -> libmpi_mpifh * libmpi_f90 -> libmpi_usempi * The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example: {{{ shell$ ./configure CC=icc CXX=icpc FC=ifort ... }}} All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches). I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed. This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
# Make sure the compiler actually works, if not cross-compiling.
# Don't just use the AC macro so that we can have a pretty
# message.
AS_IF([test $ompi_fc_happy -eq 1],
[OMPI_CHECK_COMPILER_WORKS([Fortran], [], [], [],
[AC_MSG_ERROR([Could not run a simple Fortran program. Aborting.])])])
# OS X before 10.3 (deployment target) does not allow undefined common
# symbols in shared libraries. Because we can't figure out how to
# implement MPI_STATUSES_IGNORE and friends wihtout common symbols, on
# OS X we can't build the F90 bindings as a shared library.
OMPI_FORTRAN_EXTRA_SHARED_LIBRARY_FLAGS=
AS_IF([test $ompi_fc_happy -eq 1],
[AC_MSG_CHECKING([for extra arguments to build a shared library])
case "$host" in
*apple-darwin*)
if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
AC_MSG_RESULT([impossible -- -static])
OMPI_FORTRAN_EXTRA_SHARED_LIBRARY_FLAGS="-static"
else
case ${MACOSX_DEPLOYMENT_TARGET} in
10.[012])
AC_MSG_RESULT([impossible -- -static])
OMPI_FORTRAN_EXTRA_SHARED_LIBRARY_FLAGS="-static"
;;
10.*)
AC_MSG_RESULT([-Wl,-single_module])
OMPI_FORTRAN_EXTRA_SHARED_LIBRARY_FLAGS="-Wl,-single_module"
esac
fi
;;
*)
AC_MSG_RESULT([none needed])
OMPI_FORTRAN_EXTRA_SHARED_LIBRARY_FLAGS=""
;;
esac])
AC_SUBST(OMPI_FORTRAN_EXTRA_SHARED_LIBRARY_FLAGS)
# The Absoft compiler does not like the fact that we use lots of
# "ignore TKR" comment pragmas that it doesn't understand, and
# will warn about them. From Tony Goetz at Absoft, we can use the
# -Z790 flag to quell these warnings.
AC_MSG_CHECKING([for $FC warnings flags])
fc_version=`$FC --version 2>&1`
case "$fc_version" in
*Absoft*)
AC_MSG_RESULT([-Z790])
FCFLAGS="$FCFLAGS -Z790"
;;
*)
AC_MSG_RESULT([none])
;;
esac
== Highlights == 1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler 1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release 1. The mpi module has been re-implemented and is significantly "mo' bettah" 1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk. == More details == Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7. Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey: * Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort) * The Fortran J3 committee * Tobias Burnus/gfortran * Tony !Goetz/Absoft * Terry !Donte/Oracle * ...and probably others whom I'm forgetting :-( There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax. Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time. As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory: {{{ ompi/mpi/fortran/ base/ - glue code mpif-h/ - what used to be ompi/mpi/f77 use-mpi-tkr/ - what used to be ompi/mpi/f90 use-mpi-ignore-tkr/ - new mpi module implementation use-mpi-f08/ - new mpi_f08 module implementation }}} There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version. Other things that were done: * ompi_info grew a few new output fields to describe what level of Fortran support is included * Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added * The old Fortran MPI libraries were renamed: * libmpi_f77 -> libmpi_mpifh * libmpi_f90 -> libmpi_usempi * The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example: {{{ shell$ ./configure CC=icc CXX=icpc FC=ifort ... }}} All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches). I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed. This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
# If we're still good, then save the extra file types. Do this last
# because it implies tests that should be invoked by the above tests
# (e.g., running the fortran compiler).
AS_IF([test $ompi_fc_happy -eq 1],
[AC_FC_SRCEXT(f)
AC_FC_SRCEXT(f90)])
# Per #1982, on OS X, we may need some esoteric linker flags in
# the wrapper compilers. Assume that we need it for both F77 and
# FC flags (note that in an upcoming update where there will only
# be one Fortran compiler, anyway).
AS_IF([test $ompi_fc_happy -eq 1],
[AC_MSG_CHECKING([to see if Fortran compilers need additional linker flags])
case "$host" in
*apple-darwin*)
# Test whether -Wl,-commons,use_dylibs works; if it
# does, use it.
LDFLAGS_save=$LDFLAGS
LDFLAGS="$LDFLAGS -Wl,-commons,use_dylibs"
AC_LANG_PUSH([Fortran])
AC_LINK_IFELSE([AC_LANG_SOURCE([[program test
integer :: i
end program]])],
[OMPI_FORTRAN_WRAPPER_FLAGS="-Wl,-commons,use_dylibs"
OPAL_WRAPPER_FLAGS_ADD([FCFLAGS], [$OMPI_FORTRAN_WRAPPER_FLAGS])],
== Highlights == 1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler 1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release 1. The mpi module has been re-implemented and is significantly "mo' bettah" 1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk. == More details == Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7. Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey: * Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort) * The Fortran J3 committee * Tobias Burnus/gfortran * Tony !Goetz/Absoft * Terry !Donte/Oracle * ...and probably others whom I'm forgetting :-( There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax. Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time. As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory: {{{ ompi/mpi/fortran/ base/ - glue code mpif-h/ - what used to be ompi/mpi/f77 use-mpi-tkr/ - what used to be ompi/mpi/f90 use-mpi-ignore-tkr/ - new mpi module implementation use-mpi-f08/ - new mpi_f08 module implementation }}} There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version. Other things that were done: * ompi_info grew a few new output fields to describe what level of Fortran support is included * Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added * The old Fortran MPI libraries were renamed: * libmpi_f77 -> libmpi_mpifh * libmpi_f90 -> libmpi_usempi * The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example: {{{ shell$ ./configure CC=icc CXX=icpc FC=ifort ... }}} All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches). I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed. This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
[OMPI_FORTRAN_WRAPPER_FLAGS=none])
AC_LANG_POP([Fortran])
LDFLAGS=$LDFLAGS_save
AC_MSG_RESULT([$OMPI_FORTRAN_WRAPPER_FLAGS])
;;
*)
AC_MSG_RESULT([none])
;;
esac
])
# Get our Fortran symbol mangling scheme
AS_IF([test $ompi_fc_happy -eq 1],
[OMPI_FORTRAN_FIND_EXT_SYMBOL_CONVENTION])
# Make sure we can link with C code.
AS_IF([test $ompi_fc_happy -eq 1],
[OMPI_LANG_LINK_WITH_C([Fortran], [],
[cat <<EOF
**********************************************************************
It appears that your Fortran compiler is unable to link against
object files created by your C compiler. This typically indicates
one of a few possibilities:
- A conflict between CFLAGS and FCFLAGS
- A problem with your compiler installation(s)
- Different default build options between compilers (e.g., C
building for 32 bit and Fortran building for 64 bit)
- Incompatible compilers
Such problems can usually be solved by picking compatible compilers
and/or CFLAGS and FCFLAGS. More information (including exactly what
command was given to the compilers and what error resulted when the
commands were executed) is available in the config.log file in this
directory.
**********************************************************************
EOF
AC_MSG_ERROR([C and Fortran compilers are not link compatible. Can not continue.])])])
# Test to see if the Fortran compilers likes the C++ exceptions
# flags. If it doesn't, just abort. We *could* handle this
# scenario (e.g., probe the Fortran compiler for what flags would
# be necessary), but we're kinda assuming that no one will care.
# If they do, they'll e-mail us.
AS_IF([test $ompi_fc_happy -eq 1],
[AC_MSG_CHECKING([to see if Fortran compiler likes the C++ exception flags])
AS_IF([test "$OMPI_CXX_EXCEPTIONS_CXXFLAGS" = ""],
[AC_MSG_RESULT([skipped (no C++ exceptions flags)])],
[FCFLAGS="$FCFLAGS $OMPI_CXX_EXCEPTIONS_CXXFLAGS"
AC_LANG_PUSH([Fortran])
== Highlights == 1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler 1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release 1. The mpi module has been re-implemented and is significantly "mo' bettah" 1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk. == More details == Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7. Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey: * Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort) * The Fortran J3 committee * Tobias Burnus/gfortran * Tony !Goetz/Absoft * Terry !Donte/Oracle * ...and probably others whom I'm forgetting :-( There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax. Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time. As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory: {{{ ompi/mpi/fortran/ base/ - glue code mpif-h/ - what used to be ompi/mpi/f77 use-mpi-tkr/ - what used to be ompi/mpi/f90 use-mpi-ignore-tkr/ - new mpi module implementation use-mpi-f08/ - new mpi_f08 module implementation }}} There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version. Other things that were done: * ompi_info grew a few new output fields to describe what level of Fortran support is included * Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added * The old Fortran MPI libraries were renamed: * libmpi_f77 -> libmpi_mpifh * libmpi_f90 -> libmpi_usempi * The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example: {{{ shell$ ./configure CC=icc CXX=icpc FC=ifort ... }}} All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches). I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed. This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
AC_COMPILE_IFELSE([AC_LANG_PROGRAM([], [[
INTEGER I
I = 3]])],
[AC_MSG_RESULT([yes])],
[AC_MSG_RESULT([no])
AC_MSG_WARN([C++ exception flags are different between the C and Fortran compilers; this configure script cannot currently handle this scenario. Either disable C++ exception support or send mail to the Open MPI users list.])
AC_MSG_ERROR([*** Cannot continue])])
AC_LANG_POP
== Highlights == 1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler 1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release 1. The mpi module has been re-implemented and is significantly "mo' bettah" 1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk. == More details == Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7. Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey: * Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort) * The Fortran J3 committee * Tobias Burnus/gfortran * Tony !Goetz/Absoft * Terry !Donte/Oracle * ...and probably others whom I'm forgetting :-( There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax. Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time. As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory: {{{ ompi/mpi/fortran/ base/ - glue code mpif-h/ - what used to be ompi/mpi/f77 use-mpi-tkr/ - what used to be ompi/mpi/f90 use-mpi-ignore-tkr/ - new mpi module implementation use-mpi-f08/ - new mpi_f08 module implementation }}} There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version. Other things that were done: * ompi_info grew a few new output fields to describe what level of Fortran support is included * Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added * The old Fortran MPI libraries were renamed: * libmpi_f77 -> libmpi_mpifh * libmpi_f90 -> libmpi_usempi * The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example: {{{ shell$ ./configure CC=icc CXX=icpc FC=ifort ... }}} All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches). I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed. This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
])
])
# Per #1982, on OS X, we may need some esoteric linker flags in the
# Fortran wrapper compiler.
AC_MSG_CHECKING([to see if mpifort compiler needs additional linker flags])
case "$host" in
*apple-darwin*)
# Test whether -Wl,-commons,use_dylibs works; if it does, use it.
LDFLAGS_save=$LDFLAGS
LDFLAGS="$LDFLAGS -Wl,-commons,use_dylibs"
AC_LANG_PUSH([Fortran])
AC_LINK_IFELSE([AC_LANG_SOURCE([[program test
integer :: i
end program]])],
[OMPI_FORTRAN_WRAPPER_FLAGS="-Wl,-commons,use_dylibs"
OPAL_WRAPPER_FLAGS_ADD([FCFLAGS], [$OMPI_FORTRAN_WRAPPER_FLAGS])],
== Highlights == 1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler 1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release 1. The mpi module has been re-implemented and is significantly "mo' bettah" 1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk. == More details == Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7. Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey: * Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort) * The Fortran J3 committee * Tobias Burnus/gfortran * Tony !Goetz/Absoft * Terry !Donte/Oracle * ...and probably others whom I'm forgetting :-( There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax. Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time. As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory: {{{ ompi/mpi/fortran/ base/ - glue code mpif-h/ - what used to be ompi/mpi/f77 use-mpi-tkr/ - what used to be ompi/mpi/f90 use-mpi-ignore-tkr/ - new mpi module implementation use-mpi-f08/ - new mpi_f08 module implementation }}} There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version. Other things that were done: * ompi_info grew a few new output fields to describe what level of Fortran support is included * Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added * The old Fortran MPI libraries were renamed: * libmpi_f77 -> libmpi_mpifh * libmpi_f90 -> libmpi_usempi * The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example: {{{ shell$ ./configure CC=icc CXX=icpc FC=ifort ... }}} All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches). I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed. This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
[OMPI_FORTRAN_WRAPPER_FLAGS=none])
AC_LANG_POP([Fortran])
LDFLAGS=$LDFLAGS_save
AC_MSG_RESULT([$OMPI_FORTRAN_WRAPPER_FLAGS])
;;
*)
AC_MSG_RESULT([none])
;;
esac
# All done
AS_IF([test $ompi_fc_happy -eq 1],
[$1], [$2])
OPAL_VAR_SCOPE_POP
])dnl