ports/openmpi
ports/openmpi
1
1
Форкнуть 0
Код Релизы Активность
d624e0d60f
openmpi/opal/mca/btl/usnic/btl_usnic_mca.c

313 строки
14 KiB
C
Исходник Обычный вид История

First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
/*
* Copyright (c) 2004-2008 The Trustees of Indiana University and Indiana
* University Research and Technology
* Corporation. All rights reserved.
* Copyright (c) 2004-2011 The University of Tennessee and The University
* of Tennessee Research Foundation. All rights
* reserved.
* Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
* University of Stuttgart. All rights reserved.
* Copyright (c) 2004-2005 The Regents of the University of California.
* All rights reserved.
* Copyright (c) 2006 Sandia National Laboratories. All rights
* reserved.
usnic: fix fi_av_insert (ARP resolution) bugs We had several problems in the old code: 1. We were specifying an arbitrary timeout (100 ms) and then abandoning all remaining pending AV insert operations. We would then free the endpoint buffer that we gave to fi_av_insert(), usually causing libfabric's progress thread to write to a freed buffer. 2. We were claiming in a show_help message that the timeout was controllable via an MCA parameter. This commit removes that parameter, since there's no good method for us to specify a timeout like this to libfabric right now. 3. We also weren't waiting for the correct number of fi_av_insert() operations to complete. We were waiting for nprocs, which is accidentally fine for 2 procs on separate hosts, but not for most other proc counts. Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
2015-01-07 19:25:17 +03:00
* Copyright (c) 2008-2015 Cisco Systems, Inc. All rights reserved.
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
* Copyright (c) 2012 Los Alamos National Security, LLC. All rights
usnic: remove all trailing whitespace Style cleanup only; no code changes. This commit was SVN r32366.
2014-07-31 00:56:15 +04:00
* reserved.
Remove OPAL_HAVE_HWLOC qualifier and error out if --without-hwloc is given
2015-09-05 02:54:40 +03:00
* Copyright (c) 2015 Intel, Inc. All rights reserved.
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
* $COPYRIGHT$
*
* Additional copyrights may follow
*
* $HEADER$
*/
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
#include "opal_config.h"
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
#include <string.h>
#include <errno.h>
#include "opal/mca/base/mca_base_var.h"
#include "opal/util/argv.h"
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
#include "opal/constants.h"
usnic: convert from verbs to libfabric (yay!) This commit represents the conversion of the usnic BTL from verbs to libfabric. For the moment, libfabric is embedded in Open MPI (currently in the usnic BTL). This is because the libfabric API is still changing, and also has not yet been released. Ultimately, this embedded copy of libfabric will likely disappear and the usnic BTL will rely on an external installation of libfabric. New configure options: * --with-libfabric: will cause configure to fail if libfabric support cannot be built * --without-libfabric: will prevent libfabric support from being built * --with-libfabric=DIR: use an external libfabric installation * --with-libfabric-libdir=LIBDIR: when paired with --with-libfabric=DIR, use LIBDIR for the libfabric installation library dir The --with-libnl3[-libdir] arguments are now gone.
2014-12-03 00:09:46 +03:00
#if BTL_IN_OPAL
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
#include "opal/mca/btl/btl.h"
#include "opal/mca/btl/base/base.h"
usnic: convert from verbs to libfabric (yay!) This commit represents the conversion of the usnic BTL from verbs to libfabric. For the moment, libfabric is embedded in Open MPI (currently in the usnic BTL). This is because the libfabric API is still changing, and also has not yet been released. Ultimately, this embedded copy of libfabric will likely disappear and the usnic BTL will rely on an external installation of libfabric. New configure options: * --with-libfabric: will cause configure to fail if libfabric support cannot be built * --without-libfabric: will prevent libfabric support from being built * --with-libfabric=DIR: use an external libfabric installation * --with-libfabric-libdir=LIBDIR: when paired with --with-libfabric=DIR, use LIBDIR for the libfabric installation library dir The --with-libnl3[-libdir] arguments are now gone.
2014-12-03 00:09:46 +03:00
#else
#include "ompi/mca/btl/btl.h"
#include "ompi/mca/btl/base/base.h"
#endif
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
#include "btl_usnic.h"
#include "btl_usnic_frag.h"
#include "btl_usnic_endpoint.h"
#include "btl_usnic_module.h"
/*
* Local flags
*/
enum {
REGINT_NEG_ONE_OK = 0x01,
REGINT_GE_ZERO = 0x02,
REGINT_GE_ONE = 0x04,
REGINT_NONZERO = 0x08,
REGINT_MAX = 0x88
};
enum {
REGSTR_EMPTY_OK = 0x01,
REGSTR_MAX = 0x88
};
/*
* utility routine for string parameter registration
*/
static int reg_string(const char* param_name,
const char* help_string,
const char* default_value, char **storage,
int flags, int level)
{
*storage = (char*) default_value;
mca_base_component_var_register(&mca_btl_usnic_component.super.btl_version,
usnic: remove all trailing whitespace Style cleanup only; no code changes. This commit was SVN r32366.
2014-07-31 00:56:15 +04:00
param_name, help_string,
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
MCA_BASE_VAR_TYPE_STRING,
NULL,
0,
0,
level,
MCA_BASE_VAR_SCOPE_READONLY,
storage);
usnic: remove all trailing whitespace Style cleanup only; no code changes. This commit was SVN r32366.
2014-07-31 00:56:15 +04:00
if (0 == (flags & REGSTR_EMPTY_OK) &&
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
(NULL == *storage || 0 == strlen(*storage))) {
opal_output(0, "Bad parameter value for parameter \"%s\"",
param_name);
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
return OPAL_ERR_BAD_PARAM;
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
}
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
return OPAL_SUCCESS;
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
}
/*
* utility routine for integer parameter registration
*/
static int reg_int(const char* param_name,
const char* help_string,
int default_value, int *storage, int flags, int level)
{
*storage = default_value;
mca_base_component_var_register(&mca_btl_usnic_component.super.btl_version,
usnic: remove all trailing whitespace Style cleanup only; no code changes. This commit was SVN r32366.
2014-07-31 00:56:15 +04:00
param_name, help_string,
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
MCA_BASE_VAR_TYPE_INT,
NULL,
0,
0,
level,
MCA_BASE_VAR_SCOPE_READONLY,
storage);
if (0 != (flags & REGINT_NEG_ONE_OK) && -1 == *storage) {
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
return OPAL_SUCCESS;
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
}
if ((0 != (flags & REGINT_GE_ZERO) && *storage < 0) ||
(0 != (flags & REGINT_GE_ONE) && *storage < 1) ||
(0 != (flags & REGINT_NONZERO) && 0 == *storage)) {
opal_output(0, "Bad parameter value for parameter \"%s\"",
param_name);
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
return OPAL_ERR_BAD_PARAM;
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
}
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
return OPAL_SUCCESS;
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
}
Add usnic connectivity-checking agent service. Basically: since usnic is a connectionless transport, we do not get OS-provided services "for free" that connection-oriented transports get, namely: "hey, I wasn't able to make a connection to peer X", and "hey, your connection to peer X has died." This connectivity-checker runs in a separate progress thread in the usnic BTL in local rank 0 on each server. Upon first send in any process, the connectivty-checker agent will send some UDP pings to the peer to ensure that we can reach it. If we can't, we'll abort the job with a nice show_help message. There's a lengthy comment in btl_usnic_connectivity.h explains the scheme and how it works. Reviewed by Dave Goodell. cmr=v1.7.5:ticket=trac:4253 This commit was SVN r30860. The following Trac tickets were found above: Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
2014-02-27 02:21:25 +04:00
/*
* utility routine for integer parameter registration
*/
static int reg_bool(const char* param_name,
const char* help_string,
bool default_value, bool *storage, int level)
{
*storage = default_value;
mca_base_component_var_register(&mca_btl_usnic_component.super.btl_version,
param_name, help_string,
MCA_BASE_VAR_TYPE_BOOL,
NULL,
0,
0,
level,
MCA_BASE_VAR_SCOPE_READONLY,
storage);
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
return OPAL_SUCCESS;
Add usnic connectivity-checking agent service. Basically: since usnic is a connectionless transport, we do not get OS-provided services "for free" that connection-oriented transports get, namely: "hey, I wasn't able to make a connection to peer X", and "hey, your connection to peer X has died." This connectivity-checker runs in a separate progress thread in the usnic BTL in local rank 0 on each server. Upon first send in any process, the connectivty-checker agent will send some UDP pings to the peer to ensure that we can reach it. If we can't, we'll abort the job with a nice show_help message. There's a lengthy comment in btl_usnic_connectivity.h explains the scheme and how it works. Reviewed by Dave Goodell. cmr=v1.7.5:ticket=trac:4253 This commit was SVN r30860. The following Trac tickets were found above: Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
2014-02-27 02:21:25 +04:00
}
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
int opal_btl_usnic_component_register(void)
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
{
Minor improvements to the usnic BTL: 1. Fix ompi_info memory leak in usnic BTL: do not allocate memory in the component register function, because ompi_info only calls the component register function and then dlclose's the component -- it does not call component finalize. Instead, defer parsing the MCA param (and alloc'ing memory) until the component init function so that any allocated memory can be freed in the component close function. 1. Also add a new check to ensure that we actually have some part numbers to check. Add a show_help message if we don't find any vendor part IDs to check. 1. Add a verbose output if usnic disqualifies itself from selection because THREAD_MULTIPLE was specified. cmr=v1.7.5:reviewer=dgoodell This commit was SVN r30073.
2013-12-24 15:57:35 +04:00
int tmp, ret = 0;
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
static int max_modules;
static int stats_relative;
static int want_numa_device_assignment;
static int sd_num;
static int rd_num;
static int prio_sd_num;
static int prio_rd_num;
static int cq_num;
usnic: convert from verbs to libfabric (yay!) This commit represents the conversion of the usnic BTL from verbs to libfabric. For the moment, libfabric is embedded in Open MPI (currently in the usnic BTL). This is because the libfabric API is still changing, and also has not yet been released. Ultimately, this embedded copy of libfabric will likely disappear and the usnic BTL will rely on an external installation of libfabric. New configure options: * --with-libfabric: will cause configure to fail if libfabric support cannot be built * --without-libfabric: will prevent libfabric support from being built * --with-libfabric=DIR: use an external libfabric installation * --with-libfabric-libdir=LIBDIR: when paired with --with-libfabric=DIR, use LIBDIR for the libfabric installation library dir The --with-libnl3[-libdir] arguments are now gone.
2014-12-03 00:09:46 +03:00
static int udp_port_base;
static int max_tiny_msg_size;
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
static int eager_limit;
static int rndv_eager_limit;
usnic: pack via convertor on the fly If we need to use a convertor, go back to stashing that convertor in the frag and populating segments "on the fly" (in ompi_btl_usnic_module_progress_sends). Previously we would pack into a chain of chunk segments at prepare_src time, unnecessarily consuming additional memory. Reviewed-by: Jeff Squyres <jsquyres@cisco.com> Reviewed-by: Reese Faucette <rfaucett@cisco.com> This commit was SVN r29592.
2013-11-05 02:52:03 +04:00
static int pack_lazy_threshold;
usnic: convert some BTL_ERRORs to more descriptive show_help messages 1. After we receive N abnormally-short messages (meaning: corrupted), print a show_help message about it. N defaults to 25. N can be set to 0 disable the message via btl_usnic_max_short_packets. 1. If we receive a completion error for something other than a receive, display a show_help message. Reviewed by Dave Goodell. CMR'ing to v1.8.3, but it will require a custom patch because of the OMPI->OPAL BTL move. cmr=v1.8.3 This commit was SVN r32522.
2014-08-13 19:01:20 +04:00
static int max_short_packets;
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
#define CHECK(expr) do {\
tmp = (expr); \
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
if (OPAL_SUCCESS != tmp) ret = tmp; \
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
} while (0)
CHECK(reg_int("max_btls",
"Maximum number of usNICs to use (default: 0 = as many as are available)",
0, &max_modules,
REGINT_GE_ZERO, OPAL_INFO_LVL_2));
mca_btl_usnic_component.max_modules = (size_t) max_modules;
CHECK(reg_string("if_include",
usnic: convert from verbs to libfabric (yay!) This commit represents the conversion of the usnic BTL from verbs to libfabric. For the moment, libfabric is embedded in Open MPI (currently in the usnic BTL). This is because the libfabric API is still changing, and also has not yet been released. Ultimately, this embedded copy of libfabric will likely disappear and the usnic BTL will rely on an external installation of libfabric. New configure options: * --with-libfabric: will cause configure to fail if libfabric support cannot be built * --without-libfabric: will prevent libfabric support from being built * --with-libfabric=DIR: use an external libfabric installation * --with-libfabric-libdir=LIBDIR: when paired with --with-libfabric=DIR, use LIBDIR for the libfabric installation library dir The --with-libnl3[-libdir] arguments are now gone.
2014-12-03 00:09:46 +03:00
"Comma-delimited list of usNIC devices/networks to be used (e.g. \"eth3,usnic_0,10.10.0.0/16\"; empty value means to use all available usNICs). Mutually exclusive with btl_usnic_if_exclude.",
usnic: remove all trailing whitespace Style cleanup only; no code changes. This commit was SVN r32366.
2014-07-31 00:56:15 +04:00
NULL, &mca_btl_usnic_component.if_include,
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
REGSTR_EMPTY_OK, OPAL_INFO_LVL_1));
usnic: remove all trailing whitespace Style cleanup only; no code changes. This commit was SVN r32366.
2014-07-31 00:56:15 +04:00
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
CHECK(reg_string("if_exclude",
usnic: convert from verbs to libfabric (yay!) This commit represents the conversion of the usnic BTL from verbs to libfabric. For the moment, libfabric is embedded in Open MPI (currently in the usnic BTL). This is because the libfabric API is still changing, and also has not yet been released. Ultimately, this embedded copy of libfabric will likely disappear and the usnic BTL will rely on an external installation of libfabric. New configure options: * --with-libfabric: will cause configure to fail if libfabric support cannot be built * --without-libfabric: will prevent libfabric support from being built * --with-libfabric=DIR: use an external libfabric installation * --with-libfabric-libdir=LIBDIR: when paired with --with-libfabric=DIR, use LIBDIR for the libfabric installation library dir The --with-libnl3[-libdir] arguments are now gone.
2014-12-03 00:09:46 +03:00
"Comma-delimited list of usNIC devices/networks to be excluded (empty value means to not exclude any usNICs). Mutually exclusive with btl_usnic_if_include.",
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
NULL, &mca_btl_usnic_component.if_exclude,
REGSTR_EMPTY_OK, OPAL_INFO_LVL_1));
CHECK(reg_int("stats",
usnic: convert from verbs to libfabric (yay!) This commit represents the conversion of the usnic BTL from verbs to libfabric. For the moment, libfabric is embedded in Open MPI (currently in the usnic BTL). This is because the libfabric API is still changing, and also has not yet been released. Ultimately, this embedded copy of libfabric will likely disappear and the usnic BTL will rely on an external installation of libfabric. New configure options: * --with-libfabric: will cause configure to fail if libfabric support cannot be built * --without-libfabric: will prevent libfabric support from being built * --with-libfabric=DIR: use an external libfabric installation * --with-libfabric-libdir=LIBDIR: when paired with --with-libfabric=DIR, use LIBDIR for the libfabric installation library dir The --with-libnl3[-libdir] arguments are now gone.
2014-12-03 00:09:46 +03:00
"A non-negative integer specifying the frequency at which each usnic BTL will output statistics (default: 0 seconds, meaning that statistics are disabled)",
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
0, &mca_btl_usnic_component.stats_frequency, 0,
OPAL_INFO_LVL_4));
usnic: remove all trailing whitespace Style cleanup only; no code changes. This commit was SVN r32366.
2014-07-31 00:56:15 +04:00
mca_btl_usnic_component.stats_enabled =
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
(bool) (mca_btl_usnic_component.stats_frequency > 0);
CHECK(reg_int("stats_relative",
usnic: convert from verbs to libfabric (yay!) This commit represents the conversion of the usnic BTL from verbs to libfabric. For the moment, libfabric is embedded in Open MPI (currently in the usnic BTL). This is because the libfabric API is still changing, and also has not yet been released. Ultimately, this embedded copy of libfabric will likely disappear and the usnic BTL will rely on an external installation of libfabric. New configure options: * --with-libfabric: will cause configure to fail if libfabric support cannot be built * --without-libfabric: will prevent libfabric support from being built * --with-libfabric=DIR: use an external libfabric installation * --with-libfabric-libdir=LIBDIR: when paired with --with-libfabric=DIR, use LIBDIR for the libfabric installation library dir The --with-libnl3[-libdir] arguments are now gone.
2014-12-03 00:09:46 +03:00
"If stats are enabled, output relative stats between the timestamps (vs. cumulative stats since the beginning of the job) (default: 0 -- i.e., absolute)",
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
0, &stats_relative, 0, OPAL_INFO_LVL_4));
mca_btl_usnic_component.stats_relative = (bool) stats_relative;
CHECK(reg_string("mpool", "Name of the memory pool to be used",
"grdma", &mca_btl_usnic_component.usnic_mpool_name, 0,
OPAL_INFO_LVL_5));
usnic: put the HWLOC #if's back to preserve compat with v1.10 We try to keep the source code the same between master and v1.10. So put the #if's back for OPAL_HAVE_HWLOC (and just hard-code it to 1 on master) so that this code is also compilable in v1.10.
2015-09-18 21:23:56 +03:00
want_numa_device_assignment = OPAL_HAVE_HWLOC ? 1 : -1;
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
CHECK(reg_int("want_numa_device_assignment",
"If 1, use only Cisco VIC ports thare are a minimum NUMA distance from the MPI process for short messages. If 0, use all available Cisco VIC ports for short messages. This parameter is meaningless (and ignored) unless MPI proceses are bound to processor cores. Defaults to 1 if NUMA support is included in Open MPI; -1 otherwise.",
want_numa_device_assignment,
&want_numa_device_assignment,
0, OPAL_INFO_LVL_5));
mca_btl_usnic_component.want_numa_device_assignment =
(1 == want_numa_device_assignment) ? true : false;
CHECK(reg_int("sd_num", "Maximum send descriptors to post (-1 = pre-set defaults; depends on number and type of devices available)",
-1, &sd_num, REGINT_NEG_ONE_OK, OPAL_INFO_LVL_5));
mca_btl_usnic_component.sd_num = (int32_t) sd_num;
CHECK(reg_int("rd_num", "Number of pre-posted receive buffers (-1 = pre-set defaults; depends on number and type of devices available)",
-1, &rd_num, REGINT_NEG_ONE_OK, OPAL_INFO_LVL_5));
mca_btl_usnic_component.rd_num = (int32_t) rd_num;
CHECK(reg_int("prio_sd_num", "Maximum priority send descriptors to post (-1 = pre-set defaults; depends on number and type of devices available)",
-1, &prio_sd_num, REGINT_NEG_ONE_OK, OPAL_INFO_LVL_5));
mca_btl_usnic_component.prio_sd_num = (int32_t) prio_sd_num;
CHECK(reg_int("prio_rd_num", "Number of pre-posted priority receive buffers (-1 = pre-set defaults; depends on number and type of devices available)",
-1, &prio_rd_num, REGINT_NEG_ONE_OK, OPAL_INFO_LVL_5));
mca_btl_usnic_component.prio_rd_num = (int32_t) prio_rd_num;
CHECK(reg_int("cq_num", "Number of completion queue entries (-1 = pre-set defaults; depends on number and type of devices available; will error if (sd_num+rd_num)>cq_num)",
-1, &cq_num, REGINT_NEG_ONE_OK, OPAL_INFO_LVL_5));
mca_btl_usnic_component.cq_num = (int32_t) cq_num;
usnic: convert from verbs to libfabric (yay!) This commit represents the conversion of the usnic BTL from verbs to libfabric. For the moment, libfabric is embedded in Open MPI (currently in the usnic BTL). This is because the libfabric API is still changing, and also has not yet been released. Ultimately, this embedded copy of libfabric will likely disappear and the usnic BTL will rely on an external installation of libfabric. New configure options: * --with-libfabric: will cause configure to fail if libfabric support cannot be built * --without-libfabric: will prevent libfabric support from being built * --with-libfabric=DIR: use an external libfabric installation * --with-libfabric-libdir=LIBDIR: when paired with --with-libfabric=DIR, use LIBDIR for the libfabric installation library dir The --with-libnl3[-libdir] arguments are now gone.
2014-12-03 00:09:46 +03:00
CHECK(reg_int("base_udp_port", "Base UDP port to use for usNIC communications. If 0, system will pick the port number. If non-zero, it will be added to each process' local rank to obtain the final port number (default: 0)",
0, &udp_port_base, REGINT_GE_ZERO, OPAL_INFO_LVL_5));
mca_btl_usnic_component.udp_port_base = (int) udp_port_base;
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
CHECK(reg_int("retrans_timeout", "Number of microseconds before retransmitting a frame",
1000, &mca_btl_usnic_component.retrans_timeout,
REGINT_GE_ONE, OPAL_INFO_LVL_5));
CHECK(reg_int("priority_limit", "Max size of \"priority\" messages (0 = use pre-set defaults; depends on number and type of devices available)",
usnic: convert from verbs to libfabric (yay!) This commit represents the conversion of the usnic BTL from verbs to libfabric. For the moment, libfabric is embedded in Open MPI (currently in the usnic BTL). This is because the libfabric API is still changing, and also has not yet been released. Ultimately, this embedded copy of libfabric will likely disappear and the usnic BTL will rely on an external installation of libfabric. New configure options: * --with-libfabric: will cause configure to fail if libfabric support cannot be built * --without-libfabric: will prevent libfabric support from being built * --with-libfabric=DIR: use an external libfabric installation * --with-libfabric-libdir=LIBDIR: when paired with --with-libfabric=DIR, use LIBDIR for the libfabric installation library dir The --with-libnl3[-libdir] arguments are now gone.
2014-12-03 00:09:46 +03:00
0, &max_tiny_msg_size,
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
REGINT_GE_ZERO, OPAL_INFO_LVL_5));
usnic: convert from verbs to libfabric (yay!) This commit represents the conversion of the usnic BTL from verbs to libfabric. For the moment, libfabric is embedded in Open MPI (currently in the usnic BTL). This is because the libfabric API is still changing, and also has not yet been released. Ultimately, this embedded copy of libfabric will likely disappear and the usnic BTL will rely on an external installation of libfabric. New configure options: * --with-libfabric: will cause configure to fail if libfabric support cannot be built * --without-libfabric: will prevent libfabric support from being built * --with-libfabric=DIR: use an external libfabric installation * --with-libfabric-libdir=LIBDIR: when paired with --with-libfabric=DIR, use LIBDIR for the libfabric installation library dir The --with-libnl3[-libdir] arguments are now gone.
2014-12-03 00:09:46 +03:00
opal_btl_usnic_module_template.max_tiny_msg_size =
(size_t) max_tiny_msg_size;
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
CHECK(reg_int("eager_limit", "Eager send limit (0 = use pre-set defaults; depends on number and type of devices available)",
0, &eager_limit, REGINT_GE_ZERO, OPAL_INFO_LVL_5));
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
opal_btl_usnic_module_template.super.btl_eager_limit = eager_limit;
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
CHECK(reg_int("rndv_eager_limit", "Eager rendezvous limit (0 = use pre-set defaults; depends on number and type of devices available)",
0, &rndv_eager_limit, REGINT_GE_ZERO, OPAL_INFO_LVL_5));
usnic: remove all trailing whitespace Style cleanup only; no code changes. This commit was SVN r32366.
2014-07-31 00:56:15 +04:00
opal_btl_usnic_module_template.super.btl_rndv_eager_limit =
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
rndv_eager_limit;
usnic: pack via convertor on the fly If we need to use a convertor, go back to stashing that convertor in the frag and populating segments "on the fly" (in ompi_btl_usnic_module_progress_sends). Previously we would pack into a chain of chunk segments at prepare_src time, unnecessarily consuming additional memory. Reviewed-by: Jeff Squyres <jsquyres@cisco.com> Reviewed-by: Reese Faucette <rfaucett@cisco.com> This commit was SVN r29592.
2013-11-05 02:52:03 +04:00
CHECK(reg_int("pack_lazy_threshold", "Convertor packing on-the-fly threshold (-1 = always pack eagerly, 0 = always pack lazily, otherwise will pack on the fly if fragment size is > limit)",
USNIC_DFLT_PACK_LAZY_THRESHOLD, &pack_lazy_threshold, REGINT_NEG_ONE_OK, OPAL_INFO_LVL_5));
mca_btl_usnic_component.pack_lazy_threshold = pack_lazy_threshold;
usnic: convert some BTL_ERRORs to more descriptive show_help messages 1. After we receive N abnormally-short messages (meaning: corrupted), print a show_help message about it. N defaults to 25. N can be set to 0 disable the message via btl_usnic_max_short_packets. 1. If we receive a completion error for something other than a receive, display a show_help message. Reviewed by Dave Goodell. CMR'ing to v1.8.3, but it will require a custom patch because of the OMPI->OPAL BTL move. cmr=v1.8.3 This commit was SVN r32522.
2014-08-13 19:01:20 +04:00
CHECK(reg_int("max_short_packets", "Number of abnormally-short packets received before outputting a warning (0 = never show the warning)",
25, &max_short_packets,
REGINT_GE_ZERO, OPAL_INFO_LVL_5));
mca_btl_usnic_component.max_short_packets = max_short_packets;
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
/* Default to bandwidth auto-detection */
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
opal_btl_usnic_module_template.super.btl_bandwidth = 0;
usnic: convert from verbs to libfabric (yay!) This commit represents the conversion of the usnic BTL from verbs to libfabric. For the moment, libfabric is embedded in Open MPI (currently in the usnic BTL). This is because the libfabric API is still changing, and also has not yet been released. Ultimately, this embedded copy of libfabric will likely disappear and the usnic BTL will rely on an external installation of libfabric. New configure options: * --with-libfabric: will cause configure to fail if libfabric support cannot be built * --without-libfabric: will prevent libfabric support from being built * --with-libfabric=DIR: use an external libfabric installation * --with-libfabric-libdir=LIBDIR: when paired with --with-libfabric=DIR, use LIBDIR for the libfabric installation library dir The --with-libnl3[-libdir] arguments are now gone.
2014-12-03 00:09:46 +03:00
opal_btl_usnic_module_template.super.btl_latency = 2;
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
usnic: behave better when ibv_create_ah() fails When ibv_create_ah() fails due to an address resolution failure, it really only means that we can't reach that one peer -- so we should just ignore that one peer. If ibv_create_ah() fails for some other reason, then give up on the entire usnic_X device. Change the show_help() message that is displayed when ibv_create_ah() fails due to address resolution failure; indicate that it's likely a routing problem. Also opal_output_verbose() the same info, since show_help() is de-duplicated (and this particular show_help() message can be squelched). Fixes Cisco bugs CSCup35851 and CSCup35872. cmr=v1.8.2:ticket=trac:4734 This commit was SVN r32061. The following Trac tickets were found above: Ticket 4734 --> https://svn.open-mpi.org/trac/ompi/ticket/4734
2014-06-21 00:53:50 +04:00
/* Show "cannot find route" warnings? */
mca_btl_usnic_component.show_route_failures = true;
CHECK(reg_bool("show_route_failures",
"Whether to show a warning when route failures between MPI process peers are detected (default = 1, enabled; 0 = disabled)",
mca_btl_usnic_component.show_route_failures,
&mca_btl_usnic_component.show_route_failures,
OPAL_INFO_LVL_3));
Add usnic connectivity-checking agent service. Basically: since usnic is a connectionless transport, we do not get OS-provided services "for free" that connection-oriented transports get, namely: "hey, I wasn't able to make a connection to peer X", and "hey, your connection to peer X has died." This connectivity-checker runs in a separate progress thread in the usnic BTL in local rank 0 on each server. Upon first send in any process, the connectivty-checker agent will send some UDP pings to the peer to ensure that we can reach it. If we can't, we'll abort the job with a nice show_help message. There's a lengthy comment in btl_usnic_connectivity.h explains the scheme and how it works. Reviewed by Dave Goodell. cmr=v1.7.5:ticket=trac:4253 This commit was SVN r30860. The following Trac tickets were found above: Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
2014-02-27 02:21:25 +04:00
/* Connectivity verification */
mca_btl_usnic_component.connectivity_enabled = true;
CHECK(reg_bool("connectivity_check",
"Whether to enable the usNIC connectivity check upon first send (default = 1, enabled; 0 = disabled)",
mca_btl_usnic_component.connectivity_enabled,
&mca_btl_usnic_component.connectivity_enabled,
OPAL_INFO_LVL_3));
btl_usnic_mca.c: Increase default connectivity checker frequency In abusive MPI communication patterns, sending a UDP ping only once a second may not be sufficient -- all the UDP pings may be dropped. So increase the frequency of the pings to every quarter second, and allow more total pings to be sent. Total timeout time is still the same (10 seconds) -- we'll just now try 40 times (i.e., once every quarter second) as opposed to 10 times (i.e., once a second). Testing has shown that this frequency allows the connectivity checker to always succeed even in the many-to-one abusive communication patterns. cmr=v1.8.2:reviewer=dgoodell This commit was SVN r31602.
2014-05-02 15:06:18 +04:00
mca_btl_usnic_component.connectivity_ack_timeout = 250;
Add usnic connectivity-checking agent service. Basically: since usnic is a connectionless transport, we do not get OS-provided services "for free" that connection-oriented transports get, namely: "hey, I wasn't able to make a connection to peer X", and "hey, your connection to peer X has died." This connectivity-checker runs in a separate progress thread in the usnic BTL in local rank 0 on each server. Upon first send in any process, the connectivty-checker agent will send some UDP pings to the peer to ensure that we can reach it. If we can't, we'll abort the job with a nice show_help message. There's a lengthy comment in btl_usnic_connectivity.h explains the scheme and how it works. Reviewed by Dave Goodell. cmr=v1.7.5:ticket=trac:4253 This commit was SVN r30860. The following Trac tickets were found above: Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
2014-02-27 02:21:25 +04:00
CHECK(reg_int("connectivity_ack_timeout",
usnic: convert from verbs to libfabric (yay!) This commit represents the conversion of the usnic BTL from verbs to libfabric. For the moment, libfabric is embedded in Open MPI (currently in the usnic BTL). This is because the libfabric API is still changing, and also has not yet been released. Ultimately, this embedded copy of libfabric will likely disappear and the usnic BTL will rely on an external installation of libfabric. New configure options: * --with-libfabric: will cause configure to fail if libfabric support cannot be built * --without-libfabric: will prevent libfabric support from being built * --with-libfabric=DIR: use an external libfabric installation * --with-libfabric-libdir=LIBDIR: when paired with --with-libfabric=DIR, use LIBDIR for the libfabric installation library dir The --with-libnl3[-libdir] arguments are now gone.
2014-12-03 00:09:46 +03:00
"Timeout, in milliseconds, while waiting for an ACK while verification connectivity between usNIC interfaces. If 0, the connectivity check is disabled (must be >=0).",
Add usnic connectivity-checking agent service. Basically: since usnic is a connectionless transport, we do not get OS-provided services "for free" that connection-oriented transports get, namely: "hey, I wasn't able to make a connection to peer X", and "hey, your connection to peer X has died." This connectivity-checker runs in a separate progress thread in the usnic BTL in local rank 0 on each server. Upon first send in any process, the connectivty-checker agent will send some UDP pings to the peer to ensure that we can reach it. If we can't, we'll abort the job with a nice show_help message. There's a lengthy comment in btl_usnic_connectivity.h explains the scheme and how it works. Reviewed by Dave Goodell. cmr=v1.7.5:ticket=trac:4253 This commit was SVN r30860. The following Trac tickets were found above: Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
2014-02-27 02:21:25 +04:00
mca_btl_usnic_component.connectivity_ack_timeout,
&mca_btl_usnic_component.connectivity_ack_timeout,
REGINT_GE_ZERO, OPAL_INFO_LVL_3));
btl_usnic_mca.c: Increase default connectivity checker frequency In abusive MPI communication patterns, sending a UDP ping only once a second may not be sufficient -- all the UDP pings may be dropped. So increase the frequency of the pings to every quarter second, and allow more total pings to be sent. Total timeout time is still the same (10 seconds) -- we'll just now try 40 times (i.e., once every quarter second) as opposed to 10 times (i.e., once a second). Testing has shown that this frequency allows the connectivity checker to always succeed even in the many-to-one abusive communication patterns. cmr=v1.8.2:reviewer=dgoodell This commit was SVN r31602.
2014-05-02 15:06:18 +04:00
mca_btl_usnic_component.connectivity_num_retries = 40;
Add usnic connectivity-checking agent service. Basically: since usnic is a connectionless transport, we do not get OS-provided services "for free" that connection-oriented transports get, namely: "hey, I wasn't able to make a connection to peer X", and "hey, your connection to peer X has died." This connectivity-checker runs in a separate progress thread in the usnic BTL in local rank 0 on each server. Upon first send in any process, the connectivty-checker agent will send some UDP pings to the peer to ensure that we can reach it. If we can't, we'll abort the job with a nice show_help message. There's a lengthy comment in btl_usnic_connectivity.h explains the scheme and how it works. Reviewed by Dave Goodell. cmr=v1.7.5:ticket=trac:4253 This commit was SVN r30860. The following Trac tickets were found above: Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
2014-02-27 02:21:25 +04:00
CHECK(reg_int("connectivity_error_num_retries",
"Number of times to retry usNIC connectivity verification before aborting the MPI job (must be >0).",
mca_btl_usnic_component.connectivity_num_retries,
&mca_btl_usnic_component.connectivity_num_retries,
REGINT_GE_ONE, OPAL_INFO_LVL_3));
usnic: add btl_usnic_connectivity_map MCA param to output link information If the btl_usnic_connectivity_map MCA param is set to a non-NULL value, then each MPI process will output a file named <prefix>-<hostname>.pid<pid>.job<jobid>.mcwrank<MCW rank>.txt. Its contents will detail which usNIC device(s) (and therefore which link(s)) are being used to communicate with each peer MPI process. Here is a sample output file (named mpi005.pid26071.job1640759297.mcwrank0.txt): {{{ device=usnic_0,interface=eth4,ip=10.10.0.5/16,mac=24:57:20:05:20:00,mtu=9000 device=usnic_1,interface=eth5,ip=10.2.0.5/16,mac=24:57:20:05:21:00,mtu=9000 device=usnic_2,interface=eth6,ip=10.3.0.5/16,mac=24:57:20:05:50:00,mtu=9000 peer=1,hostname=mpi006,device=usnic_0@peer_ip=10.10.0.6/16@peer_mac=24:57:20:06:20:00,device=usnic_1@peer_ip=10.2.0.6/16@peer_mac=24:57:20:06:21:00,device=usnic_2@peer_ip=10.3.0.6/16@peer_mac=24:57:20:06:50:00 peer=2,hostname=mpi007,device=usnic_0@peer_ip=10.10.0.7/16@peer_mac=24:57:20:07:20:00,device=usnic_1@peer_ip=10.2.0.7/16@peer_mac=24:57:20:07:21:00,device=usnic_2@peer_ip=10.3.0.7/16@peer_mac=24:57:20:07:50:00 peer=3,hostname=mpi008,device=usnic_0@peer_ip=10.10.0.8/16@peer_mac=24:57:20:08:20:00,device=usnic_1@peer_ip=10.2.0.8/16@peer_mac=24:57:20:08:21:00,device=usnic_2@peer_ip=10.3.0.8/16@peer_mac=24:57:20:08:50:00 }}} Reviewed by Reese Faucette cmr=v1.8.2 This commit was SVN r32156.
2014-07-08 23:14:46 +04:00
mca_btl_usnic_component.connectivity_map_prefix = NULL;
CHECK(reg_string("connectivity_map",
usnic: convert from verbs to libfabric (yay!) This commit represents the conversion of the usnic BTL from verbs to libfabric. For the moment, libfabric is embedded in Open MPI (currently in the usnic BTL). This is because the libfabric API is still changing, and also has not yet been released. Ultimately, this embedded copy of libfabric will likely disappear and the usnic BTL will rely on an external installation of libfabric. New configure options: * --with-libfabric: will cause configure to fail if libfabric support cannot be built * --without-libfabric: will prevent libfabric support from being built * --with-libfabric=DIR: use an external libfabric installation * --with-libfabric-libdir=LIBDIR: when paired with --with-libfabric=DIR, use LIBDIR for the libfabric installation library dir The --with-libnl3[-libdir] arguments are now gone.
2014-12-03 00:09:46 +03:00
"Write a per-process file containing the usNIC connectivity map. If this parameter is specified, it is the filename prefix emitted by each MPI process. The full filename emitted by each process is of the form: <prefix>-<hostname>.<pid>.<jobid>.<MCW rank>.txt.",
usnic: add btl_usnic_connectivity_map MCA param to output link information If the btl_usnic_connectivity_map MCA param is set to a non-NULL value, then each MPI process will output a file named <prefix>-<hostname>.pid<pid>.job<jobid>.mcwrank<MCW rank>.txt. Its contents will detail which usNIC device(s) (and therefore which link(s)) are being used to communicate with each peer MPI process. Here is a sample output file (named mpi005.pid26071.job1640759297.mcwrank0.txt): {{{ device=usnic_0,interface=eth4,ip=10.10.0.5/16,mac=24:57:20:05:20:00,mtu=9000 device=usnic_1,interface=eth5,ip=10.2.0.5/16,mac=24:57:20:05:21:00,mtu=9000 device=usnic_2,interface=eth6,ip=10.3.0.5/16,mac=24:57:20:05:50:00,mtu=9000 peer=1,hostname=mpi006,device=usnic_0@peer_ip=10.10.0.6/16@peer_mac=24:57:20:06:20:00,device=usnic_1@peer_ip=10.2.0.6/16@peer_mac=24:57:20:06:21:00,device=usnic_2@peer_ip=10.3.0.6/16@peer_mac=24:57:20:06:50:00 peer=2,hostname=mpi007,device=usnic_0@peer_ip=10.10.0.7/16@peer_mac=24:57:20:07:20:00,device=usnic_1@peer_ip=10.2.0.7/16@peer_mac=24:57:20:07:21:00,device=usnic_2@peer_ip=10.3.0.7/16@peer_mac=24:57:20:07:50:00 peer=3,hostname=mpi008,device=usnic_0@peer_ip=10.10.0.8/16@peer_mac=24:57:20:08:20:00,device=usnic_1@peer_ip=10.2.0.8/16@peer_mac=24:57:20:08:21:00,device=usnic_2@peer_ip=10.3.0.8/16@peer_mac=24:57:20:08:50:00 }}} Reviewed by Reese Faucette cmr=v1.8.2 This commit was SVN r32156.
2014-07-08 23:14:46 +04:00
mca_btl_usnic_component.connectivity_map_prefix,
&mca_btl_usnic_component.connectivity_map_prefix,
REGSTR_EMPTY_OK, OPAL_INFO_LVL_3));
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
return ret;
}
Копировать постоянную ссылку