2015-05-05 01:11:34 +03:00
|
|
|
/* -*- Mode: C; c-basic-offset:4 ; indent-tabs-mode:nil -*- */
|
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-)
WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL
All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic.
This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
|
|
|
/*
|
|
|
|
* Copyright (c) 2013 The University of Tennessee and The University
|
|
|
|
* of Tennessee Research Foundation. All rights
|
|
|
|
* reserved.
|
|
|
|
* Copyright (c) 2013 Inria. All rights reserved.
|
2016-01-16 20:44:52 +03:00
|
|
|
* Copyright (c) 2014-2016 Intel, Inc. All rights reserved.
|
2016-01-14 04:34:44 +03:00
|
|
|
* Copyright (c) 2014-2016 Research Organization for Information Science
|
2014-10-27 08:40:10 +03:00
|
|
|
* and Technology (RIST). All rights reserved.
|
2015-05-05 01:11:34 +03:00
|
|
|
* Copyright (c) 2015 Los Alamos National Security, LLC. All rights
|
|
|
|
* reserved.
|
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-)
WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL
All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic.
This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
|
|
|
* $COPYRIGHT$
|
2015-06-24 06:59:57 +03:00
|
|
|
*
|
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-)
WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL
All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic.
This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
|
|
|
* Additional copyrights may follow
|
2015-06-24 06:59:57 +03:00
|
|
|
*
|
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-)
WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL
All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic.
This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
|
|
|
* $HEADER$
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include "proc.h"
|
|
|
|
#include "opal/util/proc.h"
|
|
|
|
#include "opal/util/arch.h"
|
Per the PMIx RFC:
WHAT: Merge the PMIx branch into the devel repo, creating a new
OPAL “lmix” framework to abstract PMI support for all RTEs.
Replace the ORTE daemon-level collectives with a new PMIx
server and update the ORTE grpcomm framework to support
server-to-server collectives
WHY: We’ve had problems dealing with variations in PMI implementations,
and need to extend the existing PMI definitions to meet exascale
requirements.
WHEN: Mon, Aug 25
WHERE: https://github.com/rhc54/ompi-svn-mirror.git
Several community members have been working on a refactoring of the current PMI support within OMPI. Although the APIs are common, Slurm and Cray implement a different range of capabilities, and package them differently. For example, Cray provides an integrated PMI-1/2 library, while Slurm separates the two and requires the user to specify the one to be used at runtime. In addition, several bugs in the Slurm implementations have caused problems requiring extra coding.
All this has led to a slew of #if’s in the PMI code and bugs when the corner-case logic for one implementation accidentally traps the other. Extending this support to other implementations would have increased this complexity to an unacceptable level.
Accordingly, we have:
* created a new OPAL “pmix” framework to abstract the PMI support, with separate components for Cray, Slurm PMI-1, and Slurm PMI-2 implementations.
* Replaced the current ORTE grpcomm daemon-based collective operation with an integrated PMIx server, and updated the grpcomm APIs to provide more flexible, multi-algorithm support for collective operations. At this time, only the xcast and allgather operations are supported.
* Replaced the current global collective id with a signature based on the names of the participating procs. The allows an unlimited number of collectives to be executed by any group of processes, subject to the requirement that only one collective can be active at a time for a unique combination of procs. Note that a proc can be involved in any number of simultaneous collectives - it is the specific combination of procs that is subject to the constraint
* removed the prior OMPI/OPAL modex code
* added new macros for executing modex send/recv to simplify use of the new APIs. The send macros allow the caller to specify whether or not the BTL supports async modex operations - if so, then the non-blocking “fence” operation is used, if the active PMIx component supports it. Otherwise, the default is a full blocking modex exchange as we currently perform.
* retained the current flag that directs us to use a blocking fence operation, but only to retrieve data upon demand
This commit was SVN r32570.
2014-08-21 22:56:47 +04:00
|
|
|
#include "opal/mca/pmix/pmix.h"
|
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-)
WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL
All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic.
This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
|
|
|
|
2014-11-12 04:00:42 +03:00
|
|
|
opal_process_name_t opal_name_wildcard = {OPAL_JOBID_WILDCARD, OPAL_VPID_WILDCARD};
|
2015-06-24 06:59:57 +03:00
|
|
|
opal_process_name_t opal_name_invalid = {OPAL_JOBID_INVALID, OPAL_VPID_INVALID};
|
2014-11-12 04:00:42 +03:00
|
|
|
|
2014-07-27 01:43:34 +04:00
|
|
|
opal_process_info_t opal_process_info = {
|
2014-10-04 01:19:48 +04:00
|
|
|
.nodename = NULL,
|
|
|
|
.job_session_dir = NULL,
|
|
|
|
.proc_session_dir = NULL,
|
2014-08-22 09:17:51 +04:00
|
|
|
.num_local_peers = 0, /* there is nobody else but me */
|
2014-07-27 01:43:34 +04:00
|
|
|
.my_local_rank = 0, /* I'm the only process around here */
|
|
|
|
.cpuset = NULL,
|
|
|
|
};
|
|
|
|
|
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-)
WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL
All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic.
This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
|
|
|
static opal_proc_t opal_local_proc = {
|
|
|
|
{ .opal_list_next = NULL,
|
|
|
|
.opal_list_prev = NULL},
|
2014-11-12 04:00:42 +03:00
|
|
|
{OPAL_JOBID_INVALID, OPAL_VPID_INVALID},
|
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-)
WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL
All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic.
This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
|
|
|
0,
|
|
|
|
0,
|
|
|
|
NULL,
|
2014-10-04 01:19:48 +04:00
|
|
|
NULL
|
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-)
WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL
All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic.
This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
|
|
|
};
|
|
|
|
static opal_proc_t* opal_proc_my_name = &opal_local_proc;
|
|
|
|
|
|
|
|
static void opal_proc_construct(opal_proc_t* proc)
|
|
|
|
{
|
|
|
|
proc->proc_arch = opal_local_arch;
|
|
|
|
proc->proc_convertor = NULL;
|
|
|
|
proc->proc_flags = 0;
|
2014-11-12 04:00:42 +03:00
|
|
|
proc->proc_name = *OPAL_NAME_INVALID;
|
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-)
WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL
All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic.
This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
|
|
|
}
|
|
|
|
|
|
|
|
static void opal_proc_destruct(opal_proc_t* proc)
|
|
|
|
{
|
2014-08-01 20:36:23 +04:00
|
|
|
proc->proc_flags = 0;
|
2014-11-12 04:00:42 +03:00
|
|
|
proc->proc_name = *OPAL_NAME_INVALID;
|
2014-08-01 20:36:23 +04:00
|
|
|
proc->proc_hostname = NULL;
|
|
|
|
proc->proc_convertor = NULL;
|
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-)
WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL
All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic.
This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
|
|
|
}
|
|
|
|
|
|
|
|
OBJ_CLASS_INSTANCE(opal_proc_t, opal_list_item_t,
|
|
|
|
opal_proc_construct, opal_proc_destruct);
|
|
|
|
|
2015-06-18 19:53:20 +03:00
|
|
|
OBJ_CLASS_INSTANCE(opal_namelist_t, opal_list_item_t,
|
|
|
|
NULL, NULL);
|
|
|
|
|
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-)
WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL
All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic.
This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
|
|
|
static int
|
2014-10-27 08:40:10 +03:00
|
|
|
opal_compare_opal_procs(const opal_process_name_t p1,
|
|
|
|
const opal_process_name_t p2)
|
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-)
WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL
All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic.
This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
|
|
|
{
|
2014-11-12 04:00:42 +03:00
|
|
|
if( p1.jobid < p2.jobid ) {
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
if( p1.jobid > p2.jobid ) {
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
if( p1.vpid < p2.vpid ) {
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
if( p1.vpid > p2.vpid ) {
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
return 0;
|
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-)
WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL
All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic.
This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
|
|
|
}
|
|
|
|
|
|
|
|
opal_compare_proc_fct_t opal_compare_proc = opal_compare_opal_procs;
|
|
|
|
|
|
|
|
opal_proc_t* opal_proc_local_get(void)
|
|
|
|
{
|
|
|
|
return opal_proc_my_name;
|
|
|
|
}
|
|
|
|
|
|
|
|
int opal_proc_local_set(opal_proc_t* proc)
|
|
|
|
{
|
|
|
|
if( proc != opal_proc_my_name ) {
|
|
|
|
if( NULL != proc )
|
|
|
|
OBJ_RETAIN(proc);
|
|
|
|
if( &opal_local_proc != opal_proc_my_name )
|
|
|
|
OBJ_RELEASE(opal_proc_my_name);
|
|
|
|
if( NULL != proc ) {
|
|
|
|
opal_proc_my_name = proc;
|
|
|
|
} else {
|
|
|
|
opal_proc_my_name = &opal_local_proc;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return OPAL_SUCCESS;
|
|
|
|
}
|
|
|
|
|
Per the PMIx RFC:
WHAT: Merge the PMIx branch into the devel repo, creating a new
OPAL “lmix” framework to abstract PMI support for all RTEs.
Replace the ORTE daemon-level collectives with a new PMIx
server and update the ORTE grpcomm framework to support
server-to-server collectives
WHY: We’ve had problems dealing with variations in PMI implementations,
and need to extend the existing PMI definitions to meet exascale
requirements.
WHEN: Mon, Aug 25
WHERE: https://github.com/rhc54/ompi-svn-mirror.git
Several community members have been working on a refactoring of the current PMI support within OMPI. Although the APIs are common, Slurm and Cray implement a different range of capabilities, and package them differently. For example, Cray provides an integrated PMI-1/2 library, while Slurm separates the two and requires the user to specify the one to be used at runtime. In addition, several bugs in the Slurm implementations have caused problems requiring extra coding.
All this has led to a slew of #if’s in the PMI code and bugs when the corner-case logic for one implementation accidentally traps the other. Extending this support to other implementations would have increased this complexity to an unacceptable level.
Accordingly, we have:
* created a new OPAL “pmix” framework to abstract the PMI support, with separate components for Cray, Slurm PMI-1, and Slurm PMI-2 implementations.
* Replaced the current ORTE grpcomm daemon-based collective operation with an integrated PMIx server, and updated the grpcomm APIs to provide more flexible, multi-algorithm support for collective operations. At this time, only the xcast and allgather operations are supported.
* Replaced the current global collective id with a signature based on the names of the participating procs. The allows an unlimited number of collectives to be executed by any group of processes, subject to the requirement that only one collective can be active at a time for a unique combination of procs. Note that a proc can be involved in any number of simultaneous collectives - it is the specific combination of procs that is subject to the constraint
* removed the prior OMPI/OPAL modex code
* added new macros for executing modex send/recv to simplify use of the new APIs. The send macros allow the caller to specify whether or not the BTL supports async modex operations - if so, then the non-blocking “fence” operation is used, if the active PMIx component supports it. Otherwise, the default is a full blocking modex exchange as we currently perform.
* retained the current flag that directs us to use a blocking fence operation, but only to retrieve data upon demand
This commit was SVN r32570.
2014-08-21 22:56:47 +04:00
|
|
|
/* this function is used to temporarily set the local
|
|
|
|
* name while OPAL and upper layers are initializing,
|
|
|
|
* thus allowing debug messages to be more easily
|
|
|
|
* understood */
|
|
|
|
void opal_proc_set_name(opal_process_name_t *name)
|
|
|
|
{
|
2014-10-27 08:40:10 +03:00
|
|
|
/* to protect alignment, copy the name across */
|
|
|
|
memcpy(&opal_local_proc.proc_name, name, sizeof(opal_process_name_t));
|
Per the PMIx RFC:
WHAT: Merge the PMIx branch into the devel repo, creating a new
OPAL “lmix” framework to abstract PMI support for all RTEs.
Replace the ORTE daemon-level collectives with a new PMIx
server and update the ORTE grpcomm framework to support
server-to-server collectives
WHY: We’ve had problems dealing with variations in PMI implementations,
and need to extend the existing PMI definitions to meet exascale
requirements.
WHEN: Mon, Aug 25
WHERE: https://github.com/rhc54/ompi-svn-mirror.git
Several community members have been working on a refactoring of the current PMI support within OMPI. Although the APIs are common, Slurm and Cray implement a different range of capabilities, and package them differently. For example, Cray provides an integrated PMI-1/2 library, while Slurm separates the two and requires the user to specify the one to be used at runtime. In addition, several bugs in the Slurm implementations have caused problems requiring extra coding.
All this has led to a slew of #if’s in the PMI code and bugs when the corner-case logic for one implementation accidentally traps the other. Extending this support to other implementations would have increased this complexity to an unacceptable level.
Accordingly, we have:
* created a new OPAL “pmix” framework to abstract the PMI support, with separate components for Cray, Slurm PMI-1, and Slurm PMI-2 implementations.
* Replaced the current ORTE grpcomm daemon-based collective operation with an integrated PMIx server, and updated the grpcomm APIs to provide more flexible, multi-algorithm support for collective operations. At this time, only the xcast and allgather operations are supported.
* Replaced the current global collective id with a signature based on the names of the participating procs. The allows an unlimited number of collectives to be executed by any group of processes, subject to the requirement that only one collective can be active at a time for a unique combination of procs. Note that a proc can be involved in any number of simultaneous collectives - it is the specific combination of procs that is subject to the constraint
* removed the prior OMPI/OPAL modex code
* added new macros for executing modex send/recv to simplify use of the new APIs. The send macros allow the caller to specify whether or not the BTL supports async modex operations - if so, then the non-blocking “fence” operation is used, if the active PMIx component supports it. Otherwise, the default is a full blocking modex exchange as we currently perform.
* retained the current flag that directs us to use a blocking fence operation, but only to retrieve data upon demand
This commit was SVN r32570.
2014-08-21 22:56:47 +04:00
|
|
|
}
|
|
|
|
|
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-)
WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL
All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic.
This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
|
|
|
/**
|
|
|
|
* The following functions are surrogates for the RTE functionality, and are not supposed
|
|
|
|
* to be called. Instead, the corresponding function pointer should be set by the upper layer
|
|
|
|
* before the call to opal_init, to make them point to the correct accessors based on the
|
|
|
|
* underlying RTE.
|
|
|
|
*/
|
|
|
|
static char*
|
|
|
|
opal_process_name_print_should_never_be_called(const opal_process_name_t procname)
|
|
|
|
{
|
|
|
|
return "My Name is Nobody";
|
|
|
|
}
|
|
|
|
|
2014-11-12 04:00:42 +03:00
|
|
|
static char*
|
|
|
|
opal_vpid_print_should_never_be_called(const opal_vpid_t unused)
|
|
|
|
{
|
|
|
|
return "My VPID";
|
|
|
|
}
|
|
|
|
|
|
|
|
static char*
|
|
|
|
opal_jobid_print_should_never_be_called(const opal_jobid_t unused)
|
|
|
|
{
|
|
|
|
return "My JOBID";
|
|
|
|
}
|
|
|
|
|
|
|
|
static int opal_convert_string_to_process_name_should_never_be_called(opal_process_name_t *name,
|
|
|
|
const char* name_string)
|
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-)
WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL
All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic.
This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
|
|
|
{
|
2014-11-12 04:00:42 +03:00
|
|
|
return OPAL_ERR_NOT_SUPPORTED;
|
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-)
WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL
All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic.
This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
|
|
|
}
|
|
|
|
|
2015-06-18 19:53:20 +03:00
|
|
|
static int opal_convert_process_name_to_string_should_never_be_called(char** name_string,
|
|
|
|
const opal_process_name_t *name)
|
|
|
|
{
|
|
|
|
return OPAL_ERR_NOT_SUPPORTED;
|
|
|
|
}
|
|
|
|
|
2016-01-14 04:34:44 +03:00
|
|
|
static int opal_snprintf_jobid_should_never_be_called(char* name_string, size_t size, opal_jobid_t jobid)
|
2015-06-18 19:53:20 +03:00
|
|
|
{
|
2016-01-16 20:44:52 +03:00
|
|
|
(void)strncpy(name_string, "My JOBID", size);
|
|
|
|
return OPAL_SUCCESS;
|
2015-06-18 19:53:20 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
static int opal_convert_string_to_jobid_should_never_be_called(opal_jobid_t *jobid, const char *jobid_string)
|
|
|
|
{
|
|
|
|
return OPAL_ERR_NOT_SUPPORTED;
|
|
|
|
}
|
|
|
|
|
2015-05-05 01:11:34 +03:00
|
|
|
static struct opal_proc_t *opal_proc_for_name_should_never_be_called (opal_process_name_t name)
|
|
|
|
{
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-)
WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL
All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic.
This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
|
|
|
char* (*opal_process_name_print)(const opal_process_name_t) = opal_process_name_print_should_never_be_called;
|
2014-11-12 04:00:42 +03:00
|
|
|
char* (*opal_vpid_print)(const opal_vpid_t) = opal_vpid_print_should_never_be_called;
|
|
|
|
char* (*opal_jobid_print)(const opal_jobid_t) = opal_jobid_print_should_never_be_called;
|
|
|
|
int (*opal_convert_string_to_process_name)(opal_process_name_t *name, const char* name_string) = opal_convert_string_to_process_name_should_never_be_called;
|
2015-06-18 19:53:20 +03:00
|
|
|
int (*opal_convert_process_name_to_string)(char** name_string, const opal_process_name_t *name) = opal_convert_process_name_to_string_should_never_be_called;
|
2016-01-14 04:34:44 +03:00
|
|
|
int (*opal_snprintf_jobid)(char* name_string, size_t size, opal_jobid_t jobid) = opal_snprintf_jobid_should_never_be_called;
|
2015-06-18 19:53:20 +03:00
|
|
|
int (*opal_convert_string_to_jobid)(opal_jobid_t *jobid, const char *jobid_string) = opal_convert_string_to_jobid_should_never_be_called;
|
2015-05-05 01:11:34 +03:00
|
|
|
struct opal_proc_t *(*opal_proc_for_name) (const opal_process_name_t name) = opal_proc_for_name_should_never_be_called;
|
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-)
WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL
All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic.
This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
|
|
|
|
2014-10-04 01:19:48 +04:00
|
|
|
char* opal_get_proc_hostname(const opal_proc_t *proc)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
/* if the proc is NULL, then we can't know */
|
|
|
|
if (NULL == proc) {
|
|
|
|
return "unknown";
|
|
|
|
}
|
|
|
|
|
|
|
|
/* if it is my own hostname we are after, then just hand back
|
|
|
|
* the value in opal_process_info */
|
|
|
|
if (proc == opal_proc_my_name) {
|
|
|
|
return opal_process_info.nodename;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* see if we already have the data - if so, pass it back */
|
|
|
|
if (NULL != proc->proc_hostname) {
|
|
|
|
return proc->proc_hostname;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* if we don't already have it, then try to get it */
|
2015-06-18 19:53:20 +03:00
|
|
|
OPAL_MODEX_RECV_VALUE(ret, OPAL_PMIX_HOSTNAME, &proc->proc_name,
|
2014-10-04 01:19:48 +04:00
|
|
|
(char**)&(proc->proc_hostname), OPAL_STRING);
|
|
|
|
if (OPAL_SUCCESS != ret) {
|
|
|
|
OPAL_ERROR_LOG(ret);
|
|
|
|
return "unknown"; // return something so the caller doesn't segfault
|
|
|
|
}
|
|
|
|
|
|
|
|
/* user is not allowed to release the data */
|
|
|
|
return proc->proc_hostname;
|
|
|
|
}
|