1
1
openmpi/orte/mca/grpcomm/grpcomm.h

193 строки
6.8 KiB
C
Исходник Обычный вид История

/* -*- Mode: C; c-basic-offset:4 ; indent-tabs-mode:nil -*- */
/*
* Copyright (c) 2004-2008 The Trustees of Indiana University and Indiana
* University Research and Technology
* Corporation. All rights reserved.
* Copyright (c) 2004-2005 The University of Tennessee and The University
* of Tennessee Research Foundation. All rights
* reserved.
* Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
* University of Stuttgart. All rights reserved.
* Copyright (c) 2004-2005 The Regents of the University of California.
* All rights reserved.
* Copyright (c) 2011-2016 Los Alamos National Security, LLC. All rights
* reserved.
* Copyright (c) 2016 Research Organization for Information Science
* and Technology (RIST). All rights reserved.
* $COPYRIGHT$
*
* Additional copyrights may follow
*
* $HEADER$
*/
/** @file:
*
* The OpenRTE Group Communications
*
* The OpenRTE Group Comm framework provides communication services that
* span entire jobs or collections of processes. It is not intended to be
* used for point-to-point communications (the RML does that), nor should
* it be viewed as a high-performance communication channel for large-scale
* data transfers.
*/
#ifndef MCA_GRPCOMM_H
#define MCA_GRPCOMM_H
/*
* includes
*/
#include "orte_config.h"
#include "orte/constants.h"
#include "orte/types.h"
#include "orte/mca/mca.h"
These changes were mostly captured in a prior RFC (except for #2 below) and are aimed specifically at improving startup performance and setting up the remaining modifications described in that RFC. The commit has been tested for C/R and Cray operations, and on Odin (SLURM, rsh) and RoadRunner (TM). I tried to update all environments, but obviously could not test them. I know that Windows needs some work, and have highlighted what is know to be needed in the odls process component. This represents a lot of work by Brian, Tim P, Josh, and myself, with much advice from Jeff and others. For posterity, I have appended a copy of the email describing the work that was done: As we have repeatedly noted, the modex operation in MPI_Init is the single greatest consumer of time during startup. To-date, we have executed that operation as an ORTE stage gate that held the process until a startup message containing all required modex (and OOB contact info - see #3 below) info could be sent to it. Each process would send its data to the HNP's registry, which assembled and sent the message when all processes had reported in. In addition, ORTE had taken responsibility for monitoring process status as it progressed through a series of "stage gates". The process reported its status at each gate, and ORTE would then send a "release" message once all procs had reported in. The incoming changes revamp these procedures in three ways: 1. eliminating the ORTE stage gate system and cleanly delineating responsibility between the OMPI and ORTE layers for MPI init/finalize. The modex stage gate (STG1) has been replaced by a collective operation in the modex itself that performs an allgather on the required modex info. The allgather is implemented using the orte_grpcomm framework since the BTL's are not active at that point. At the moment, the grpcomm framework only has a "basic" component analogous to OMPI's "basic" coll framework - I would recommend that the MPI team create additional, more advanced components to improve performance of this step. The other stage gates have been replaced by orte_grpcomm barrier functions. We tried to use MPI barriers instead (since the BTL's are active at that point), but - as we discussed on the telecon - these are not currently true barriers so the job would hang when we fell through while messages were still in process. Note that the grpcomm barrier doesn't actually resolve that problem, but Brian has pointed out that we are unlikely to ever see it violated. Again, you might want to spend a little time on an advanced barrier algorithm as the one in "basic" is very simplistic. Summarizing this change: ORTE no longer tracks process state nor has direct responsibility for synchronizing jobs. This is now done via collective operations within the MPI layer, albeit using ORTE collective communication services. I -strongly- urge the MPI team to implement advanced collective algorithms to improve the performance of this critical procedure. 2. reducing the volume of data exchanged during modex. Data in the modex consisted of the process name, the name of the node where that process is located (expressed as a string), plus a string representation of all contact info. The nodename was required in order for the modex to determine if the process was local or not - in addition, some people like to have it to print pretty error messages when a connection failed. The size of this data has been reduced in three ways: (a) reducing the size of the process name itself. The process name consisted of two 32-bit fields for the jobid and vpid. This is far larger than any current system, or system likely to exist in the near future, can support. Accordingly, the default size of these fields has been reduced to 16-bits, which means you can have 32k procs in each of 32k jobs. Since the daemons must have a vpid, and we require one daemon/node, this also restricts the default configuration to 32k nodes. To support any future "mega-clusters", a configuration option --enable-jumbo-apps has been added. This option increases the jobid and vpid field sizes to 32-bits. Someday, if necessary, someone can add yet another option to increase them to 64-bits, I suppose. (b) replacing the string nodename with an integer nodeid. Since we have one daemon/node, the nodeid corresponds to the local daemon's vpid. This replaces an often lengthy string with only 2 (or at most 4) bytes, a substantial reduction. (c) when the mca param requesting that nodenames be sent to support pretty error messages, a second mca param is now used to request FQDN - otherwise, the domain name is stripped (by default) from the message to save space. If someone wants to combine those into a single param somehow (perhaps with an argument?), they are welcome to do so - I didn't want to alter what people are already using. While these may seem like small savings, they actually amount to a significant impact when aggregated across the entire modex operation. Since every proc must receive the modex data regardless of the collective used to send it, just reducing the size of the process name removes nearly 400MBytes of communication from a 32k proc job (admittedly, much of this comm may occur in parallel). So it does add up pretty quickly. 3. routing RML messages to reduce connections. The default messaging system remains point-to-point - i.e., each proc opens a socket to every proc it communicates with and sends its messages directly. A new option uses the orteds as routers - i.e., each proc only opens a single socket to its local orted. All messages are sent from the proc to the orted, which forwards the message to the orted on the node where the intended recipient proc is located - that orted then forwards the message to its local proc (the recipient). This greatly reduces the connection storm we have encountered during startup. It also has the benefit of removing the sharing of every proc's OOB contact with every other proc. The orted routing tables are populated during launch since every orted gets a map of where every proc is being placed. Each proc, therefore, only needs to know the contact info for its local daemon, which is passed in via the environment when the proc is fork/exec'd by the daemon. This alone removes ~50 bytes/process of communication that was in the current STG1 startup message - so for our 32k proc job, this saves us roughly 32k*50 = 1.6MBytes sent to 32k procs = 51GBytes of messaging. Note that you can use the new routing method by specifying -mca routed tree - if you so desire. This mode will become the default at some point in the future. There are a few minor additional changes in the commit that I'll just note in passing: * propagation of command line mca params to the orteds - fixes ticket #1073. See note there for details. * requiring of "finalize" prior to "exit" for MPI procs - fixes ticket #1144. See note there for details. * cleanup of some stale header files This commit was SVN r16364.
2007-10-05 19:48:23 +00:00
#include "opal/class/opal_list.h"
#include "opal/class/opal_bitmap.h"
#include "opal/dss/dss_types.h"
#include "orte/mca/rml/rml_types.h"
BEGIN_C_DECLS
Per the PMIx RFC: WHAT: Merge the PMIx branch into the devel repo, creating a new OPAL “lmix” framework to abstract PMI support for all RTEs. Replace the ORTE daemon-level collectives with a new PMIx server and update the ORTE grpcomm framework to support server-to-server collectives WHY: We’ve had problems dealing with variations in PMI implementations, and need to extend the existing PMI definitions to meet exascale requirements. WHEN: Mon, Aug 25 WHERE: https://github.com/rhc54/ompi-svn-mirror.git Several community members have been working on a refactoring of the current PMI support within OMPI. Although the APIs are common, Slurm and Cray implement a different range of capabilities, and package them differently. For example, Cray provides an integrated PMI-1/2 library, while Slurm separates the two and requires the user to specify the one to be used at runtime. In addition, several bugs in the Slurm implementations have caused problems requiring extra coding. All this has led to a slew of #if’s in the PMI code and bugs when the corner-case logic for one implementation accidentally traps the other. Extending this support to other implementations would have increased this complexity to an unacceptable level. Accordingly, we have: * created a new OPAL “pmix” framework to abstract the PMI support, with separate components for Cray, Slurm PMI-1, and Slurm PMI-2 implementations. * Replaced the current ORTE grpcomm daemon-based collective operation with an integrated PMIx server, and updated the grpcomm APIs to provide more flexible, multi-algorithm support for collective operations. At this time, only the xcast and allgather operations are supported. * Replaced the current global collective id with a signature based on the names of the participating procs. The allows an unlimited number of collectives to be executed by any group of processes, subject to the requirement that only one collective can be active at a time for a unique combination of procs. Note that a proc can be involved in any number of simultaneous collectives - it is the specific combination of procs that is subject to the constraint * removed the prior OMPI/OPAL modex code * added new macros for executing modex send/recv to simplify use of the new APIs. The send macros allow the caller to specify whether or not the BTL supports async modex operations - if so, then the non-blocking “fence” operation is used, if the active PMIx component supports it. Otherwise, the default is a full blocking modex exchange as we currently perform. * retained the current flag that directs us to use a blocking fence operation, but only to retrieve data upon demand This commit was SVN r32570.
2014-08-21 18:56:47 +00:00
/* define a callback function to be invoked upon
* collective completion */
typedef void (*orte_grpcomm_cbfunc_t)(int status, opal_buffer_t *buf, void *cbdata);
/* Define a collective signature so we don't need to
* track global collective id's */
typedef struct {
opal_object_t super;
orte_process_name_t *signature;
size_t sz;
} orte_grpcomm_signature_t;
OBJ_CLASS_DECLARATION(orte_grpcomm_signature_t);
/* Internal component object for tracking ongoing
* allgather operations */
typedef struct {
opal_list_item_t super;
/* collective's signature */
orte_grpcomm_signature_t *sig;
/* collection bucket */
opal_buffer_t bucket;
/* participating daemons */
orte_vpid_t *dmns;
/** number of participating daemons */
Per the PMIx RFC: WHAT: Merge the PMIx branch into the devel repo, creating a new OPAL “lmix” framework to abstract PMI support for all RTEs. Replace the ORTE daemon-level collectives with a new PMIx server and update the ORTE grpcomm framework to support server-to-server collectives WHY: We’ve had problems dealing with variations in PMI implementations, and need to extend the existing PMI definitions to meet exascale requirements. WHEN: Mon, Aug 25 WHERE: https://github.com/rhc54/ompi-svn-mirror.git Several community members have been working on a refactoring of the current PMI support within OMPI. Although the APIs are common, Slurm and Cray implement a different range of capabilities, and package them differently. For example, Cray provides an integrated PMI-1/2 library, while Slurm separates the two and requires the user to specify the one to be used at runtime. In addition, several bugs in the Slurm implementations have caused problems requiring extra coding. All this has led to a slew of #if’s in the PMI code and bugs when the corner-case logic for one implementation accidentally traps the other. Extending this support to other implementations would have increased this complexity to an unacceptable level. Accordingly, we have: * created a new OPAL “pmix” framework to abstract the PMI support, with separate components for Cray, Slurm PMI-1, and Slurm PMI-2 implementations. * Replaced the current ORTE grpcomm daemon-based collective operation with an integrated PMIx server, and updated the grpcomm APIs to provide more flexible, multi-algorithm support for collective operations. At this time, only the xcast and allgather operations are supported. * Replaced the current global collective id with a signature based on the names of the participating procs. The allows an unlimited number of collectives to be executed by any group of processes, subject to the requirement that only one collective can be active at a time for a unique combination of procs. Note that a proc can be involved in any number of simultaneous collectives - it is the specific combination of procs that is subject to the constraint * removed the prior OMPI/OPAL modex code * added new macros for executing modex send/recv to simplify use of the new APIs. The send macros allow the caller to specify whether or not the BTL supports async modex operations - if so, then the non-blocking “fence” operation is used, if the active PMIx component supports it. Otherwise, the default is a full blocking modex exchange as we currently perform. * retained the current flag that directs us to use a blocking fence operation, but only to retrieve data upon demand This commit was SVN r32570.
2014-08-21 18:56:47 +00:00
size_t ndmns;
/** my index in the dmns array */
unsigned long my_rank;
/* number of buckets expected */
size_t nexpected;
Per the PMIx RFC: WHAT: Merge the PMIx branch into the devel repo, creating a new OPAL “lmix” framework to abstract PMI support for all RTEs. Replace the ORTE daemon-level collectives with a new PMIx server and update the ORTE grpcomm framework to support server-to-server collectives WHY: We’ve had problems dealing with variations in PMI implementations, and need to extend the existing PMI definitions to meet exascale requirements. WHEN: Mon, Aug 25 WHERE: https://github.com/rhc54/ompi-svn-mirror.git Several community members have been working on a refactoring of the current PMI support within OMPI. Although the APIs are common, Slurm and Cray implement a different range of capabilities, and package them differently. For example, Cray provides an integrated PMI-1/2 library, while Slurm separates the two and requires the user to specify the one to be used at runtime. In addition, several bugs in the Slurm implementations have caused problems requiring extra coding. All this has led to a slew of #if’s in the PMI code and bugs when the corner-case logic for one implementation accidentally traps the other. Extending this support to other implementations would have increased this complexity to an unacceptable level. Accordingly, we have: * created a new OPAL “pmix” framework to abstract the PMI support, with separate components for Cray, Slurm PMI-1, and Slurm PMI-2 implementations. * Replaced the current ORTE grpcomm daemon-based collective operation with an integrated PMIx server, and updated the grpcomm APIs to provide more flexible, multi-algorithm support for collective operations. At this time, only the xcast and allgather operations are supported. * Replaced the current global collective id with a signature based on the names of the participating procs. The allows an unlimited number of collectives to be executed by any group of processes, subject to the requirement that only one collective can be active at a time for a unique combination of procs. Note that a proc can be involved in any number of simultaneous collectives - it is the specific combination of procs that is subject to the constraint * removed the prior OMPI/OPAL modex code * added new macros for executing modex send/recv to simplify use of the new APIs. The send macros allow the caller to specify whether or not the BTL supports async modex operations - if so, then the non-blocking “fence” operation is used, if the active PMIx component supports it. Otherwise, the default is a full blocking modex exchange as we currently perform. * retained the current flag that directs us to use a blocking fence operation, but only to retrieve data upon demand This commit was SVN r32570.
2014-08-21 18:56:47 +00:00
/* number reported in */
size_t nreported;
/* distance masks for receive */
opal_bitmap_t distance_mask_recv;
/* received buckets */
opal_buffer_t ** buffers;
Per the PMIx RFC: WHAT: Merge the PMIx branch into the devel repo, creating a new OPAL “lmix” framework to abstract PMI support for all RTEs. Replace the ORTE daemon-level collectives with a new PMIx server and update the ORTE grpcomm framework to support server-to-server collectives WHY: We’ve had problems dealing with variations in PMI implementations, and need to extend the existing PMI definitions to meet exascale requirements. WHEN: Mon, Aug 25 WHERE: https://github.com/rhc54/ompi-svn-mirror.git Several community members have been working on a refactoring of the current PMI support within OMPI. Although the APIs are common, Slurm and Cray implement a different range of capabilities, and package them differently. For example, Cray provides an integrated PMI-1/2 library, while Slurm separates the two and requires the user to specify the one to be used at runtime. In addition, several bugs in the Slurm implementations have caused problems requiring extra coding. All this has led to a slew of #if’s in the PMI code and bugs when the corner-case logic for one implementation accidentally traps the other. Extending this support to other implementations would have increased this complexity to an unacceptable level. Accordingly, we have: * created a new OPAL “pmix” framework to abstract the PMI support, with separate components for Cray, Slurm PMI-1, and Slurm PMI-2 implementations. * Replaced the current ORTE grpcomm daemon-based collective operation with an integrated PMIx server, and updated the grpcomm APIs to provide more flexible, multi-algorithm support for collective operations. At this time, only the xcast and allgather operations are supported. * Replaced the current global collective id with a signature based on the names of the participating procs. The allows an unlimited number of collectives to be executed by any group of processes, subject to the requirement that only one collective can be active at a time for a unique combination of procs. Note that a proc can be involved in any number of simultaneous collectives - it is the specific combination of procs that is subject to the constraint * removed the prior OMPI/OPAL modex code * added new macros for executing modex send/recv to simplify use of the new APIs. The send macros allow the caller to specify whether or not the BTL supports async modex operations - if so, then the non-blocking “fence” operation is used, if the active PMIx component supports it. Otherwise, the default is a full blocking modex exchange as we currently perform. * retained the current flag that directs us to use a blocking fence operation, but only to retrieve data upon demand This commit was SVN r32570.
2014-08-21 18:56:47 +00:00
/* callback function */
orte_grpcomm_cbfunc_t cbfunc;
/* user-provided callback data */
void *cbdata;
} orte_grpcomm_coll_t;
OBJ_CLASS_DECLARATION(orte_grpcomm_coll_t);
/*
* Component functions - all MUST be provided!
*/
Per the PMIx RFC: WHAT: Merge the PMIx branch into the devel repo, creating a new OPAL “lmix” framework to abstract PMI support for all RTEs. Replace the ORTE daemon-level collectives with a new PMIx server and update the ORTE grpcomm framework to support server-to-server collectives WHY: We’ve had problems dealing with variations in PMI implementations, and need to extend the existing PMI definitions to meet exascale requirements. WHEN: Mon, Aug 25 WHERE: https://github.com/rhc54/ompi-svn-mirror.git Several community members have been working on a refactoring of the current PMI support within OMPI. Although the APIs are common, Slurm and Cray implement a different range of capabilities, and package them differently. For example, Cray provides an integrated PMI-1/2 library, while Slurm separates the two and requires the user to specify the one to be used at runtime. In addition, several bugs in the Slurm implementations have caused problems requiring extra coding. All this has led to a slew of #if’s in the PMI code and bugs when the corner-case logic for one implementation accidentally traps the other. Extending this support to other implementations would have increased this complexity to an unacceptable level. Accordingly, we have: * created a new OPAL “pmix” framework to abstract the PMI support, with separate components for Cray, Slurm PMI-1, and Slurm PMI-2 implementations. * Replaced the current ORTE grpcomm daemon-based collective operation with an integrated PMIx server, and updated the grpcomm APIs to provide more flexible, multi-algorithm support for collective operations. At this time, only the xcast and allgather operations are supported. * Replaced the current global collective id with a signature based on the names of the participating procs. The allows an unlimited number of collectives to be executed by any group of processes, subject to the requirement that only one collective can be active at a time for a unique combination of procs. Note that a proc can be involved in any number of simultaneous collectives - it is the specific combination of procs that is subject to the constraint * removed the prior OMPI/OPAL modex code * added new macros for executing modex send/recv to simplify use of the new APIs. The send macros allow the caller to specify whether or not the BTL supports async modex operations - if so, then the non-blocking “fence” operation is used, if the active PMIx component supports it. Otherwise, the default is a full blocking modex exchange as we currently perform. * retained the current flag that directs us to use a blocking fence operation, but only to retrieve data upon demand This commit was SVN r32570.
2014-08-21 18:56:47 +00:00
/* initialize the selected module */
typedef int (*orte_grpcomm_base_module_init_fn_t)(void);
/* finalize the selected module */
typedef void (*orte_grpcomm_base_module_finalize_fn_t)(void);
Per the PMIx RFC: WHAT: Merge the PMIx branch into the devel repo, creating a new OPAL “lmix” framework to abstract PMI support for all RTEs. Replace the ORTE daemon-level collectives with a new PMIx server and update the ORTE grpcomm framework to support server-to-server collectives WHY: We’ve had problems dealing with variations in PMI implementations, and need to extend the existing PMI definitions to meet exascale requirements. WHEN: Mon, Aug 25 WHERE: https://github.com/rhc54/ompi-svn-mirror.git Several community members have been working on a refactoring of the current PMI support within OMPI. Although the APIs are common, Slurm and Cray implement a different range of capabilities, and package them differently. For example, Cray provides an integrated PMI-1/2 library, while Slurm separates the two and requires the user to specify the one to be used at runtime. In addition, several bugs in the Slurm implementations have caused problems requiring extra coding. All this has led to a slew of #if’s in the PMI code and bugs when the corner-case logic for one implementation accidentally traps the other. Extending this support to other implementations would have increased this complexity to an unacceptable level. Accordingly, we have: * created a new OPAL “pmix” framework to abstract the PMI support, with separate components for Cray, Slurm PMI-1, and Slurm PMI-2 implementations. * Replaced the current ORTE grpcomm daemon-based collective operation with an integrated PMIx server, and updated the grpcomm APIs to provide more flexible, multi-algorithm support for collective operations. At this time, only the xcast and allgather operations are supported. * Replaced the current global collective id with a signature based on the names of the participating procs. The allows an unlimited number of collectives to be executed by any group of processes, subject to the requirement that only one collective can be active at a time for a unique combination of procs. Note that a proc can be involved in any number of simultaneous collectives - it is the specific combination of procs that is subject to the constraint * removed the prior OMPI/OPAL modex code * added new macros for executing modex send/recv to simplify use of the new APIs. The send macros allow the caller to specify whether or not the BTL supports async modex operations - if so, then the non-blocking “fence” operation is used, if the active PMIx component supports it. Otherwise, the default is a full blocking modex exchange as we currently perform. * retained the current flag that directs us to use a blocking fence operation, but only to retrieve data upon demand This commit was SVN r32570.
2014-08-21 18:56:47 +00:00
/* Scalably send a message. Caller will provide an array
* of daemon vpids that are to receive the message. A NULL
* pointer indicates that all daemons are participating. */
typedef int (*orte_grpcomm_base_module_xcast_fn_t)(orte_vpid_t *vpids,
size_t nprocs,
opal_buffer_t *msg);
/* allgather - gather data from all specified daemons. Barrier operations
* will provide a zero-byte buffer. Caller will provide an array
* of daemon vpids that are participating in the allgather via the
* orte_grpcomm_coll_t object. A NULL pointer indicates that all daemons
* are participating.
*
* NOTE: this is a non-blocking call. The callback function cached in
* the orte_grpcomm_coll_t will be invoked upon completion. */
typedef int (*orte_grpcomm_base_module_allgather_fn_t)(orte_grpcomm_coll_t *coll,
opal_buffer_t *buf);
/*
Per the PMIx RFC: WHAT: Merge the PMIx branch into the devel repo, creating a new OPAL “lmix” framework to abstract PMI support for all RTEs. Replace the ORTE daemon-level collectives with a new PMIx server and update the ORTE grpcomm framework to support server-to-server collectives WHY: We’ve had problems dealing with variations in PMI implementations, and need to extend the existing PMI definitions to meet exascale requirements. WHEN: Mon, Aug 25 WHERE: https://github.com/rhc54/ompi-svn-mirror.git Several community members have been working on a refactoring of the current PMI support within OMPI. Although the APIs are common, Slurm and Cray implement a different range of capabilities, and package them differently. For example, Cray provides an integrated PMI-1/2 library, while Slurm separates the two and requires the user to specify the one to be used at runtime. In addition, several bugs in the Slurm implementations have caused problems requiring extra coding. All this has led to a slew of #if’s in the PMI code and bugs when the corner-case logic for one implementation accidentally traps the other. Extending this support to other implementations would have increased this complexity to an unacceptable level. Accordingly, we have: * created a new OPAL “pmix” framework to abstract the PMI support, with separate components for Cray, Slurm PMI-1, and Slurm PMI-2 implementations. * Replaced the current ORTE grpcomm daemon-based collective operation with an integrated PMIx server, and updated the grpcomm APIs to provide more flexible, multi-algorithm support for collective operations. At this time, only the xcast and allgather operations are supported. * Replaced the current global collective id with a signature based on the names of the participating procs. The allows an unlimited number of collectives to be executed by any group of processes, subject to the requirement that only one collective can be active at a time for a unique combination of procs. Note that a proc can be involved in any number of simultaneous collectives - it is the specific combination of procs that is subject to the constraint * removed the prior OMPI/OPAL modex code * added new macros for executing modex send/recv to simplify use of the new APIs. The send macros allow the caller to specify whether or not the BTL supports async modex operations - if so, then the non-blocking “fence” operation is used, if the active PMIx component supports it. Otherwise, the default is a full blocking modex exchange as we currently perform. * retained the current flag that directs us to use a blocking fence operation, but only to retrieve data upon demand This commit was SVN r32570.
2014-08-21 18:56:47 +00:00
* Ver 3.0 - internal modules
*/
Per the PMIx RFC: WHAT: Merge the PMIx branch into the devel repo, creating a new OPAL “lmix” framework to abstract PMI support for all RTEs. Replace the ORTE daemon-level collectives with a new PMIx server and update the ORTE grpcomm framework to support server-to-server collectives WHY: We’ve had problems dealing with variations in PMI implementations, and need to extend the existing PMI definitions to meet exascale requirements. WHEN: Mon, Aug 25 WHERE: https://github.com/rhc54/ompi-svn-mirror.git Several community members have been working on a refactoring of the current PMI support within OMPI. Although the APIs are common, Slurm and Cray implement a different range of capabilities, and package them differently. For example, Cray provides an integrated PMI-1/2 library, while Slurm separates the two and requires the user to specify the one to be used at runtime. In addition, several bugs in the Slurm implementations have caused problems requiring extra coding. All this has led to a slew of #if’s in the PMI code and bugs when the corner-case logic for one implementation accidentally traps the other. Extending this support to other implementations would have increased this complexity to an unacceptable level. Accordingly, we have: * created a new OPAL “pmix” framework to abstract the PMI support, with separate components for Cray, Slurm PMI-1, and Slurm PMI-2 implementations. * Replaced the current ORTE grpcomm daemon-based collective operation with an integrated PMIx server, and updated the grpcomm APIs to provide more flexible, multi-algorithm support for collective operations. At this time, only the xcast and allgather operations are supported. * Replaced the current global collective id with a signature based on the names of the participating procs. The allows an unlimited number of collectives to be executed by any group of processes, subject to the requirement that only one collective can be active at a time for a unique combination of procs. Note that a proc can be involved in any number of simultaneous collectives - it is the specific combination of procs that is subject to the constraint * removed the prior OMPI/OPAL modex code * added new macros for executing modex send/recv to simplify use of the new APIs. The send macros allow the caller to specify whether or not the BTL supports async modex operations - if so, then the non-blocking “fence” operation is used, if the active PMIx component supports it. Otherwise, the default is a full blocking modex exchange as we currently perform. * retained the current flag that directs us to use a blocking fence operation, but only to retrieve data upon demand This commit was SVN r32570.
2014-08-21 18:56:47 +00:00
typedef struct {
orte_grpcomm_base_module_init_fn_t init;
orte_grpcomm_base_module_finalize_fn_t finalize;
/* collective operations */
Per the PMIx RFC: WHAT: Merge the PMIx branch into the devel repo, creating a new OPAL “lmix” framework to abstract PMI support for all RTEs. Replace the ORTE daemon-level collectives with a new PMIx server and update the ORTE grpcomm framework to support server-to-server collectives WHY: We’ve had problems dealing with variations in PMI implementations, and need to extend the existing PMI definitions to meet exascale requirements. WHEN: Mon, Aug 25 WHERE: https://github.com/rhc54/ompi-svn-mirror.git Several community members have been working on a refactoring of the current PMI support within OMPI. Although the APIs are common, Slurm and Cray implement a different range of capabilities, and package them differently. For example, Cray provides an integrated PMI-1/2 library, while Slurm separates the two and requires the user to specify the one to be used at runtime. In addition, several bugs in the Slurm implementations have caused problems requiring extra coding. All this has led to a slew of #if’s in the PMI code and bugs when the corner-case logic for one implementation accidentally traps the other. Extending this support to other implementations would have increased this complexity to an unacceptable level. Accordingly, we have: * created a new OPAL “pmix” framework to abstract the PMI support, with separate components for Cray, Slurm PMI-1, and Slurm PMI-2 implementations. * Replaced the current ORTE grpcomm daemon-based collective operation with an integrated PMIx server, and updated the grpcomm APIs to provide more flexible, multi-algorithm support for collective operations. At this time, only the xcast and allgather operations are supported. * Replaced the current global collective id with a signature based on the names of the participating procs. The allows an unlimited number of collectives to be executed by any group of processes, subject to the requirement that only one collective can be active at a time for a unique combination of procs. Note that a proc can be involved in any number of simultaneous collectives - it is the specific combination of procs that is subject to the constraint * removed the prior OMPI/OPAL modex code * added new macros for executing modex send/recv to simplify use of the new APIs. The send macros allow the caller to specify whether or not the BTL supports async modex operations - if so, then the non-blocking “fence” operation is used, if the active PMIx component supports it. Otherwise, the default is a full blocking modex exchange as we currently perform. * retained the current flag that directs us to use a blocking fence operation, but only to retrieve data upon demand This commit was SVN r32570.
2014-08-21 18:56:47 +00:00
orte_grpcomm_base_module_xcast_fn_t xcast;
orte_grpcomm_base_module_allgather_fn_t allgather;
} orte_grpcomm_base_module_t;
/* the Public APIs */
/* Scalably send a message. Caller will provide an array
* of process names that are to receive the message. A NULL
* pointer indicates that all known procs are to receive
* the message. A pointer to a name that includes ORTE_VPID_WILDCARD
* will send the message to all procs in the specified jobid.
* The message will be sent to the daemons hosting the specified
* procs for processing and relay. */
typedef int (*orte_grpcomm_base_API_xcast_fn_t)(orte_grpcomm_signature_t *sig,
orte_rml_tag_t tag,
opal_buffer_t *msg);
/* allgather - gather data from all specified procs. Barrier operations
* will provide a zero-byte buffer. Caller will provide an array
* of application proc vpids that are participating in the allgather. A NULL
* pointer indicates that all known procs are participating. A pointer
* to a name that includes ORTE_VPID_WILDCARD indicates that all procs
* in the specified jobid are contributing.
*
* NOTE: this is a non-blocking call. The provided callback function
* will be invoked upon completion. */
typedef int (*orte_grpcomm_base_API_allgather_fn_t)(orte_grpcomm_signature_t *sig,
opal_buffer_t *buf,
orte_grpcomm_cbfunc_t cbfunc,
void *cbdata);
typedef struct {
/* collective operations */
orte_grpcomm_base_API_xcast_fn_t xcast;
orte_grpcomm_base_API_allgather_fn_t allgather;
} orte_grpcomm_API_module_t;
/*
* the standard component data structure
*/
Per the PMIx RFC: WHAT: Merge the PMIx branch into the devel repo, creating a new OPAL “lmix” framework to abstract PMI support for all RTEs. Replace the ORTE daemon-level collectives with a new PMIx server and update the ORTE grpcomm framework to support server-to-server collectives WHY: We’ve had problems dealing with variations in PMI implementations, and need to extend the existing PMI definitions to meet exascale requirements. WHEN: Mon, Aug 25 WHERE: https://github.com/rhc54/ompi-svn-mirror.git Several community members have been working on a refactoring of the current PMI support within OMPI. Although the APIs are common, Slurm and Cray implement a different range of capabilities, and package them differently. For example, Cray provides an integrated PMI-1/2 library, while Slurm separates the two and requires the user to specify the one to be used at runtime. In addition, several bugs in the Slurm implementations have caused problems requiring extra coding. All this has led to a slew of #if’s in the PMI code and bugs when the corner-case logic for one implementation accidentally traps the other. Extending this support to other implementations would have increased this complexity to an unacceptable level. Accordingly, we have: * created a new OPAL “pmix” framework to abstract the PMI support, with separate components for Cray, Slurm PMI-1, and Slurm PMI-2 implementations. * Replaced the current ORTE grpcomm daemon-based collective operation with an integrated PMIx server, and updated the grpcomm APIs to provide more flexible, multi-algorithm support for collective operations. At this time, only the xcast and allgather operations are supported. * Replaced the current global collective id with a signature based on the names of the participating procs. The allows an unlimited number of collectives to be executed by any group of processes, subject to the requirement that only one collective can be active at a time for a unique combination of procs. Note that a proc can be involved in any number of simultaneous collectives - it is the specific combination of procs that is subject to the constraint * removed the prior OMPI/OPAL modex code * added new macros for executing modex send/recv to simplify use of the new APIs. The send macros allow the caller to specify whether or not the BTL supports async modex operations - if so, then the non-blocking “fence” operation is used, if the active PMIx component supports it. Otherwise, the default is a full blocking modex exchange as we currently perform. * retained the current flag that directs us to use a blocking fence operation, but only to retrieve data upon demand This commit was SVN r32570.
2014-08-21 18:56:47 +00:00
struct orte_grpcomm_base_component_3_0_0_t {
mca_base_component_t base_version;
mca_base_component_data_t base_data;
};
Per the PMIx RFC: WHAT: Merge the PMIx branch into the devel repo, creating a new OPAL “lmix” framework to abstract PMI support for all RTEs. Replace the ORTE daemon-level collectives with a new PMIx server and update the ORTE grpcomm framework to support server-to-server collectives WHY: We’ve had problems dealing with variations in PMI implementations, and need to extend the existing PMI definitions to meet exascale requirements. WHEN: Mon, Aug 25 WHERE: https://github.com/rhc54/ompi-svn-mirror.git Several community members have been working on a refactoring of the current PMI support within OMPI. Although the APIs are common, Slurm and Cray implement a different range of capabilities, and package them differently. For example, Cray provides an integrated PMI-1/2 library, while Slurm separates the two and requires the user to specify the one to be used at runtime. In addition, several bugs in the Slurm implementations have caused problems requiring extra coding. All this has led to a slew of #if’s in the PMI code and bugs when the corner-case logic for one implementation accidentally traps the other. Extending this support to other implementations would have increased this complexity to an unacceptable level. Accordingly, we have: * created a new OPAL “pmix” framework to abstract the PMI support, with separate components for Cray, Slurm PMI-1, and Slurm PMI-2 implementations. * Replaced the current ORTE grpcomm daemon-based collective operation with an integrated PMIx server, and updated the grpcomm APIs to provide more flexible, multi-algorithm support for collective operations. At this time, only the xcast and allgather operations are supported. * Replaced the current global collective id with a signature based on the names of the participating procs. The allows an unlimited number of collectives to be executed by any group of processes, subject to the requirement that only one collective can be active at a time for a unique combination of procs. Note that a proc can be involved in any number of simultaneous collectives - it is the specific combination of procs that is subject to the constraint * removed the prior OMPI/OPAL modex code * added new macros for executing modex send/recv to simplify use of the new APIs. The send macros allow the caller to specify whether or not the BTL supports async modex operations - if so, then the non-blocking “fence” operation is used, if the active PMIx component supports it. Otherwise, the default is a full blocking modex exchange as we currently perform. * retained the current flag that directs us to use a blocking fence operation, but only to retrieve data upon demand This commit was SVN r32570.
2014-08-21 18:56:47 +00:00
typedef struct orte_grpcomm_base_component_3_0_0_t orte_grpcomm_base_component_3_0_0_t;
typedef orte_grpcomm_base_component_3_0_0_t orte_grpcomm_base_component_t;
/*
Per the PMIx RFC: WHAT: Merge the PMIx branch into the devel repo, creating a new OPAL “lmix” framework to abstract PMI support for all RTEs. Replace the ORTE daemon-level collectives with a new PMIx server and update the ORTE grpcomm framework to support server-to-server collectives WHY: We’ve had problems dealing with variations in PMI implementations, and need to extend the existing PMI definitions to meet exascale requirements. WHEN: Mon, Aug 25 WHERE: https://github.com/rhc54/ompi-svn-mirror.git Several community members have been working on a refactoring of the current PMI support within OMPI. Although the APIs are common, Slurm and Cray implement a different range of capabilities, and package them differently. For example, Cray provides an integrated PMI-1/2 library, while Slurm separates the two and requires the user to specify the one to be used at runtime. In addition, several bugs in the Slurm implementations have caused problems requiring extra coding. All this has led to a slew of #if’s in the PMI code and bugs when the corner-case logic for one implementation accidentally traps the other. Extending this support to other implementations would have increased this complexity to an unacceptable level. Accordingly, we have: * created a new OPAL “pmix” framework to abstract the PMI support, with separate components for Cray, Slurm PMI-1, and Slurm PMI-2 implementations. * Replaced the current ORTE grpcomm daemon-based collective operation with an integrated PMIx server, and updated the grpcomm APIs to provide more flexible, multi-algorithm support for collective operations. At this time, only the xcast and allgather operations are supported. * Replaced the current global collective id with a signature based on the names of the participating procs. The allows an unlimited number of collectives to be executed by any group of processes, subject to the requirement that only one collective can be active at a time for a unique combination of procs. Note that a proc can be involved in any number of simultaneous collectives - it is the specific combination of procs that is subject to the constraint * removed the prior OMPI/OPAL modex code * added new macros for executing modex send/recv to simplify use of the new APIs. The send macros allow the caller to specify whether or not the BTL supports async modex operations - if so, then the non-blocking “fence” operation is used, if the active PMIx component supports it. Otherwise, the default is a full blocking modex exchange as we currently perform. * retained the current flag that directs us to use a blocking fence operation, but only to retrieve data upon demand This commit was SVN r32570.
2014-08-21 18:56:47 +00:00
* Macro for use in components that are of type grpcomm v3.0.0
*/
Per the PMIx RFC: WHAT: Merge the PMIx branch into the devel repo, creating a new OPAL “lmix” framework to abstract PMI support for all RTEs. Replace the ORTE daemon-level collectives with a new PMIx server and update the ORTE grpcomm framework to support server-to-server collectives WHY: We’ve had problems dealing with variations in PMI implementations, and need to extend the existing PMI definitions to meet exascale requirements. WHEN: Mon, Aug 25 WHERE: https://github.com/rhc54/ompi-svn-mirror.git Several community members have been working on a refactoring of the current PMI support within OMPI. Although the APIs are common, Slurm and Cray implement a different range of capabilities, and package them differently. For example, Cray provides an integrated PMI-1/2 library, while Slurm separates the two and requires the user to specify the one to be used at runtime. In addition, several bugs in the Slurm implementations have caused problems requiring extra coding. All this has led to a slew of #if’s in the PMI code and bugs when the corner-case logic for one implementation accidentally traps the other. Extending this support to other implementations would have increased this complexity to an unacceptable level. Accordingly, we have: * created a new OPAL “pmix” framework to abstract the PMI support, with separate components for Cray, Slurm PMI-1, and Slurm PMI-2 implementations. * Replaced the current ORTE grpcomm daemon-based collective operation with an integrated PMIx server, and updated the grpcomm APIs to provide more flexible, multi-algorithm support for collective operations. At this time, only the xcast and allgather operations are supported. * Replaced the current global collective id with a signature based on the names of the participating procs. The allows an unlimited number of collectives to be executed by any group of processes, subject to the requirement that only one collective can be active at a time for a unique combination of procs. Note that a proc can be involved in any number of simultaneous collectives - it is the specific combination of procs that is subject to the constraint * removed the prior OMPI/OPAL modex code * added new macros for executing modex send/recv to simplify use of the new APIs. The send macros allow the caller to specify whether or not the BTL supports async modex operations - if so, then the non-blocking “fence” operation is used, if the active PMIx component supports it. Otherwise, the default is a full blocking modex exchange as we currently perform. * retained the current flag that directs us to use a blocking fence operation, but only to retrieve data upon demand This commit was SVN r32570.
2014-08-21 18:56:47 +00:00
#define ORTE_GRPCOMM_BASE_VERSION_3_0_0 \
/* grpcomm v3.0 is chained to MCA v2.0 */ \
ORTE_MCA_BASE_VERSION_2_1_0("grpcomm", 3, 0, 0)
Per the PMIx RFC: WHAT: Merge the PMIx branch into the devel repo, creating a new OPAL “lmix” framework to abstract PMI support for all RTEs. Replace the ORTE daemon-level collectives with a new PMIx server and update the ORTE grpcomm framework to support server-to-server collectives WHY: We’ve had problems dealing with variations in PMI implementations, and need to extend the existing PMI definitions to meet exascale requirements. WHEN: Mon, Aug 25 WHERE: https://github.com/rhc54/ompi-svn-mirror.git Several community members have been working on a refactoring of the current PMI support within OMPI. Although the APIs are common, Slurm and Cray implement a different range of capabilities, and package them differently. For example, Cray provides an integrated PMI-1/2 library, while Slurm separates the two and requires the user to specify the one to be used at runtime. In addition, several bugs in the Slurm implementations have caused problems requiring extra coding. All this has led to a slew of #if’s in the PMI code and bugs when the corner-case logic for one implementation accidentally traps the other. Extending this support to other implementations would have increased this complexity to an unacceptable level. Accordingly, we have: * created a new OPAL “pmix” framework to abstract the PMI support, with separate components for Cray, Slurm PMI-1, and Slurm PMI-2 implementations. * Replaced the current ORTE grpcomm daemon-based collective operation with an integrated PMIx server, and updated the grpcomm APIs to provide more flexible, multi-algorithm support for collective operations. At this time, only the xcast and allgather operations are supported. * Replaced the current global collective id with a signature based on the names of the participating procs. The allows an unlimited number of collectives to be executed by any group of processes, subject to the requirement that only one collective can be active at a time for a unique combination of procs. Note that a proc can be involved in any number of simultaneous collectives - it is the specific combination of procs that is subject to the constraint * removed the prior OMPI/OPAL modex code * added new macros for executing modex send/recv to simplify use of the new APIs. The send macros allow the caller to specify whether or not the BTL supports async modex operations - if so, then the non-blocking “fence” operation is used, if the active PMIx component supports it. Otherwise, the default is a full blocking modex exchange as we currently perform. * retained the current flag that directs us to use a blocking fence operation, but only to retrieve data upon demand This commit was SVN r32570.
2014-08-21 18:56:47 +00:00
/* Global structure for accessing grpcomm functions */
ORTE_DECLSPEC extern orte_grpcomm_API_module_t orte_grpcomm;
END_C_DECLS
#endif