1
1
openmpi/ompi/mca/osc/rdma/osc_rdma_component.c

1381 строка
52 KiB
C
Исходник Обычный вид История

/* -*- Mode: C; c-basic-offset:4 ; indent-tabs-mode:nil -*- */
/*
* Copyright (c) 2004-2007 The Trustees of Indiana University.
* All rights reserved.
* Copyright (c) 2004-2008 The University of Tennessee and The University
* of Tennessee Research Foundation. All rights
* reserved.
* Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
* University of Stuttgart. All rights reserved.
* Copyright (c) 2004-2005 The Regents of the University of California.
* All rights reserved.
* Copyright (c) 2007-2012 Los Alamos National Security, LLC. All rights
* reserved.
* Copyright (c) 2006-2008 University of Houston. All rights reserved.
* Copyright (c) 2010 Oracle and/or its affiliates. All rights reserved.
* $COPYRIGHT$
*
* Additional copyrights may follow
*
* $HEADER$
*/
#include "ompi_config.h"
#include <string.h>
#include "osc_rdma.h"
#include "osc_rdma_sendreq.h"
#include "osc_rdma_replyreq.h"
#include "osc_rdma_header.h"
#include "osc_rdma_data_move.h"
#include "osc_rdma_obj_convert.h"
#include "opal/threads/condition.h"
#include "opal/threads/mutex.h"
#include "opal/util/arch.h"
#include "opal/align.h"
#include "ompi/info/info.h"
#include "ompi/communicator/communicator.h"
#include "ompi/mca/osc/osc.h"
#include "ompi/mca/osc/base/base.h"
#include "ompi/mca/osc/base/osc_base_obj_convert.h"
#include "ompi/mca/btl/btl.h"
#include "ompi/mca/bml/bml.h"
#include "ompi/mca/bml/base/base.h"
#include "ompi/mca/pml/pml.h"
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-28 01:09:41 +04:00
static int component_register(void);
static void component_fragment_cb(struct mca_btl_base_module_t *btl,
mca_btl_base_tag_t tag,
mca_btl_base_descriptor_t *descriptor,
void *cbdata);
static int setup_rdma(ompi_osc_rdma_module_t *module);
ompi_osc_rdma_component_t mca_osc_rdma_component = {
{ /* ompi_osc_base_component_t */
{ /* ompi_base_component_t */
OMPI_OSC_BASE_VERSION_2_0_0,
"rdma",
OMPI_MAJOR_VERSION, /* MCA component major version */
OMPI_MINOR_VERSION, /* MCA component minor version */
OMPI_RELEASE_VERSION, /* MCA component release version */
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-28 01:09:41 +04:00
NULL,
NULL,
NULL,
component_register
},
{ /* mca_base_component_data */
/* The component is not checkpoint ready */
MCA_BASE_METADATA_PARAM_NONE
},
ompi_osc_rdma_component_init,
ompi_osc_rdma_component_query,
ompi_osc_rdma_component_select,
ompi_osc_rdma_component_finalize
}
};
ompi_osc_rdma_module_t ompi_osc_rdma_module_template = {
{
ompi_osc_rdma_module_free,
ompi_osc_rdma_module_put,
ompi_osc_rdma_module_get,
ompi_osc_rdma_module_accumulate,
ompi_osc_rdma_module_fence,
ompi_osc_rdma_module_start,
ompi_osc_rdma_module_complete,
ompi_osc_rdma_module_post,
ompi_osc_rdma_module_wait,
ompi_osc_rdma_module_test,
ompi_osc_rdma_module_lock,
ompi_osc_rdma_module_unlock,
}
};
/* look up parameters for configuring this window. The code first
looks in the info structure passed by the user, then through mca
parameters. */
static bool
check_config_value_bool(char *key, ompi_info_t *info)
{
char *value_string;
int value_len, ret, flag, param;
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-28 01:09:41 +04:00
const bool *flag_value;
bool result;
ret = ompi_info_get_valuelen(info, key, &value_len, &flag);
if (OMPI_SUCCESS != ret) goto info_not_found;
if (flag == 0) goto info_not_found;
value_len++;
value_string = (char*)malloc(sizeof(char) * value_len + 1); /* Should malloc 1 char for NUL-termination */
if (NULL == value_string) goto info_not_found;
ret = ompi_info_get(info, key, value_len, value_string, &flag);
if (OMPI_SUCCESS != ret) {
free(value_string);
goto info_not_found;
}
assert(flag != 0);
ret = ompi_info_value_to_bool(value_string, &result);
free(value_string);
if (OMPI_SUCCESS != ret) goto info_not_found;
return result;
info_not_found:
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-28 01:09:41 +04:00
param = mca_base_var_find("ompi", "osc", "rdma", key);
if (0 > param) return false;
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-28 01:09:41 +04:00
ret = mca_base_var_get_value(param, &flag_value, NULL, NULL);
if (OMPI_SUCCESS != ret) return false;
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-28 01:09:41 +04:00
return flag_value[0];
}
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-28 01:09:41 +04:00
static bool ompi_osc_rdma_eager_send;
static bool ompi_osc_rdma_use_buffers;
static bool ompi_osc_rdma_use_rdma;
static bool ompi_osc_rdma_rdma_completion_wait;
static bool ompi_osc_rdma_no_locks;
static int
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-28 01:09:41 +04:00
component_register(void)
{
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-28 01:09:41 +04:00
ompi_osc_rdma_eager_send = true;
(void) mca_base_component_var_register(&mca_osc_rdma_component.super.osc_version,
"eager_send",
"Attempt to start data movement during communication "
"call, instead of at synchrnoization time. "
"Info key of same name overrides this value.",
MCA_BASE_VAR_TYPE_BOOL, NULL, 0, 0,
OPAL_INFO_LVL_9,
MCA_BASE_VAR_SCOPE_READONLY,
&ompi_osc_rdma_eager_send);
ompi_osc_rdma_use_buffers = true;
(void) mca_base_component_var_register(&mca_osc_rdma_component.super.osc_version,
"use_buffers",
"Coalesce messages during an epoch to reduce "
"network utilization. Info key of same name "
"overrides this value.",
MCA_BASE_VAR_TYPE_BOOL, NULL, 0, 0,
OPAL_INFO_LVL_9,
MCA_BASE_VAR_SCOPE_READONLY,
&ompi_osc_rdma_use_buffers);
ompi_osc_rdma_use_rdma = false;
(void) mca_base_component_var_register(&mca_osc_rdma_component.super.osc_version,
"use_rdma",
"Use real RDMA operations to transfer data. "
"Info key of same name overrides this value.",
MCA_BASE_VAR_TYPE_BOOL, NULL, 0, 0,
OPAL_INFO_LVL_9,
MCA_BASE_VAR_SCOPE_READONLY,
&ompi_osc_rdma_use_rdma);
ompi_osc_rdma_rdma_completion_wait = true;
(void) mca_base_component_var_register(&mca_osc_rdma_component.super.osc_version,
"rdma_completion_wait",
"Wait for all completion of rdma events before "
"sending acknowledgment. Info key of same name "
"overrides this value.",
MCA_BASE_VAR_TYPE_BOOL, NULL, 0, 0,
OPAL_INFO_LVL_9,
MCA_BASE_VAR_SCOPE_READONLY,
&ompi_osc_rdma_rdma_completion_wait);
ompi_osc_rdma_no_locks = false;
(void) mca_base_component_var_register(&mca_osc_rdma_component.super.osc_version,
"no_locks",
"Enable optimizations available only if MPI_LOCK is "
"not used. "
"Info key of same name overrides this value.",
MCA_BASE_VAR_TYPE_BOOL, NULL, 0, 0,
OPAL_INFO_LVL_9,
MCA_BASE_VAR_SCOPE_READONLY,
&ompi_osc_rdma_no_locks);
return OMPI_SUCCESS;
}
int
ompi_osc_rdma_component_init(bool enable_progress_threads,
bool enable_mpi_threads)
{
if (!mca_bml_base_inited()) return OMPI_ERROR;
OBJ_CONSTRUCT(&mca_osc_rdma_component.c_lock, opal_mutex_t);
OBJ_CONSTRUCT(&mca_osc_rdma_component.c_modules,
opal_hash_table_t);
opal_hash_table_init(&mca_osc_rdma_component.c_modules, 2);
OBJ_CONSTRUCT(&mca_osc_rdma_component.c_request_lock,
opal_mutex_t);
OBJ_CONSTRUCT(&mca_osc_rdma_component.c_request_cond,
opal_condition_t);
OBJ_CONSTRUCT(&mca_osc_rdma_component.c_sendreqs, opal_free_list_t);
opal_free_list_init(&mca_osc_rdma_component.c_sendreqs,
sizeof(ompi_osc_rdma_sendreq_t),
OBJ_CLASS(ompi_osc_rdma_sendreq_t),
1, -1, 1);
OBJ_CONSTRUCT(&mca_osc_rdma_component.c_replyreqs, opal_free_list_t);
opal_free_list_init(&mca_osc_rdma_component.c_replyreqs,
sizeof(ompi_osc_rdma_replyreq_t),
OBJ_CLASS(ompi_osc_rdma_replyreq_t),
1, -1, 1);
OBJ_CONSTRUCT(&mca_osc_rdma_component.c_longreqs, opal_free_list_t);
opal_free_list_init(&mca_osc_rdma_component.c_longreqs,
sizeof(ompi_osc_rdma_longreq_t),
OBJ_CLASS(ompi_osc_rdma_longreq_t),
1, -1, 1);
mca_osc_rdma_component.c_btl_registered = false;
mca_osc_rdma_component.c_sequence_number = 0;
return OMPI_SUCCESS;
}
int
ompi_osc_rdma_component_finalize(void)
{
size_t num_modules;
if (0 !=
(num_modules = opal_hash_table_get_size(&mca_osc_rdma_component.c_modules))) {
opal_output(ompi_osc_base_output,
"WARNING: There were %d Windows created but not freed.",
(int) num_modules);
}
mca_bml.bml_register(MCA_BTL_TAG_OSC_RDMA, NULL, NULL);
OBJ_DESTRUCT(&mca_osc_rdma_component.c_longreqs);
OBJ_DESTRUCT(&mca_osc_rdma_component.c_replyreqs);
OBJ_DESTRUCT(&mca_osc_rdma_component.c_sendreqs);
OBJ_DESTRUCT(&mca_osc_rdma_component.c_request_cond);
OBJ_DESTRUCT(&mca_osc_rdma_component.c_request_lock);
OBJ_DESTRUCT(&mca_osc_rdma_component.c_modules);
OBJ_DESTRUCT(&mca_osc_rdma_component.c_lock);
return OMPI_SUCCESS;
}
int
ompi_osc_rdma_component_query(ompi_win_t *win,
ompi_info_t *info,
ompi_communicator_t *comm)
{
/* if we inited, then the BMLs are available and we have a path to
each peer. Return slightly higher priority than the
point-to-point code */
return 10;
}
int
ompi_osc_rdma_component_select(ompi_win_t *win,
ompi_info_t *info,
ompi_communicator_t *comm)
{
ompi_osc_rdma_module_t *module = NULL;
int ret, i;
char *tmp;
/* create module structure */
module = (ompi_osc_rdma_module_t*)
calloc(1, sizeof(ompi_osc_rdma_module_t));
if (NULL == module) return OMPI_ERR_TEMP_OUT_OF_RESOURCE;
/* fill in the function pointer part */
memcpy(module, &ompi_osc_rdma_module_template,
sizeof(ompi_osc_base_module_t));
/* initialize the module part */
OBJ_CONSTRUCT(&module->m_lock, opal_mutex_t);
OBJ_CONSTRUCT(&module->m_cond, opal_condition_t);
OBJ_CONSTRUCT(&module->m_acc_lock, opal_mutex_t);
OBJ_CONSTRUCT(&module->m_pending_sendreqs, opal_list_t);
OBJ_CONSTRUCT(&module->m_copy_pending_sendreqs, opal_list_t);
OBJ_CONSTRUCT(&module->m_queued_sendreqs, opal_list_t);
OBJ_CONSTRUCT(&module->m_locks_pending, opal_list_t);
OBJ_CONSTRUCT(&module->m_unlocks_pending, opal_list_t);
module->m_win = win;
OPAL_THREAD_LOCK(&mca_osc_rdma_component.c_lock);
module->m_sequence_number = (mca_osc_rdma_component.c_sequence_number++);
OPAL_THREAD_UNLOCK(&mca_osc_rdma_component.c_lock);
ret = ompi_comm_dup(comm, &module->m_comm);
if (ret != OMPI_SUCCESS) goto cleanup;
opal_output_verbose(1, ompi_osc_base_output,
"rdma component creating window with id %d",
ompi_comm_get_cid(module->m_comm));
asprintf(&tmp, "%d", ompi_comm_get_cid(module->m_comm));
ompi_win_set_name(win, tmp);
free(tmp);
module->m_num_pending_sendreqs = (unsigned int*)
malloc(sizeof(unsigned int) * ompi_comm_size(module->m_comm));
if (NULL == module->m_num_pending_sendreqs) {
ret = OMPI_ERR_TEMP_OUT_OF_RESOURCE;
goto cleanup;
}
memset(module->m_num_pending_sendreqs, 0,
sizeof(unsigned int) * ompi_comm_size(module->m_comm));
module->m_num_pending_out = 0;
module->m_num_pending_in = 0;
module->m_num_post_msgs = 0;
module->m_num_complete_msgs = 0;
module->m_tag_counter = 0;
module->m_copy_num_pending_sendreqs = (unsigned int*)
malloc(sizeof(unsigned int) * ompi_comm_size(module->m_comm));
if (NULL == module->m_copy_num_pending_sendreqs) {
ret = OMPI_ERR_TEMP_OUT_OF_RESOURCE;
goto cleanup;
}
memset(module->m_num_pending_sendreqs, 0,
sizeof(unsigned int) * ompi_comm_size(module->m_comm));
module->m_eager_send_ok = check_config_value_bool("eager_send", info);
/* initially, we're in that pseudo-fence state, so we allow eager
sends (yay for Fence). Other protocols will disable before
they start their epochs, so this isn't a problem. */
module->m_eager_send_active = module->m_eager_send_ok;
/* allocate space for rdma information */
module->m_use_rdma = check_config_value_bool("use_rdma", info);
module->m_rdma_wait_completion = check_config_value_bool("rdma_completion_wait", info);
module->m_setup_info = NULL;
module->m_peer_info = NULL;
/* buffer setup */
module->m_use_buffers = check_config_value_bool("use_buffers", info);
module->m_pending_buffers = (ompi_osc_rdma_buffer_t *) malloc(sizeof(ompi_osc_rdma_buffer_t) *
ompi_comm_size(module->m_comm));
memset(module->m_pending_buffers, 0,
sizeof(ompi_osc_rdma_buffer_t) * ompi_comm_size(module->m_comm));
/* fence data */
module->m_fence_coll_counts = (int*)
malloc(sizeof(int) * ompi_comm_size(module->m_comm));
if (NULL == module->m_fence_coll_counts) {
ret = OMPI_ERR_TEMP_OUT_OF_RESOURCE;
goto cleanup;
}
for (i = 0 ; i < ompi_comm_size(module->m_comm) ; ++i) {
module->m_fence_coll_counts[i] = 1;
}
/* pwsc data */
module->m_pw_group = NULL;
module->m_sc_group = NULL;
module->m_sc_remote_active_ranks = (bool*)
malloc(sizeof(bool) * ompi_comm_size(module->m_comm));
if (NULL == module->m_sc_remote_active_ranks) {
ret = OMPI_ERR_TEMP_OUT_OF_RESOURCE;
goto cleanup;
}
module->m_sc_remote_ranks = (int*)
malloc(sizeof(int) * ompi_comm_size(module->m_comm));
if (NULL == module->m_sc_remote_ranks) {
ret = OMPI_ERR_TEMP_OUT_OF_RESOURCE;
goto cleanup;
}
/* lock data */
module->m_lock_status = 0;
module->m_shared_count = 0;
module->m_lock_received_ack = 0;
/* update component data */
OPAL_THREAD_LOCK(&mca_osc_rdma_component.c_lock);
opal_hash_table_set_value_uint32(&mca_osc_rdma_component.c_modules,
ompi_comm_get_cid(module->m_comm),
module);
OPAL_THREAD_UNLOCK(&mca_osc_rdma_component.c_lock);
if (OMPI_SUCCESS != ret) goto cleanup;
/* fill in window information */
win->w_osc_module = (ompi_osc_base_module_t*) module;
if (check_config_value_bool("no_locks", info)) {
win->w_flags |= OMPI_WIN_NO_LOCKS;
}
/* register to receive fragment callbacks, if not already done */
OPAL_THREAD_LOCK(&mca_osc_rdma_component.c_lock);
if (!mca_osc_rdma_component.c_btl_registered) {
mca_osc_rdma_component.c_btl_registered = true;
ret = mca_bml.bml_register(MCA_BTL_TAG_OSC_RDMA,
component_fragment_cb,
NULL);
}
OPAL_THREAD_UNLOCK(&mca_osc_rdma_component.c_lock);
if (OMPI_SUCCESS != ret) goto cleanup;
/* sync memory - make sure all initialization completed */
opal_atomic_mb();
if (module->m_use_rdma) {
/* fill in rdma information - involves barrier semantics */
ret = setup_rdma(module);
} else {
/* barrier to prevent arrival of lock requests before we're
fully created */
ret = module->m_comm->c_coll.coll_barrier(module->m_comm,
module->m_comm->c_coll.coll_barrier_module);
}
if (OMPI_SUCCESS != ret) goto cleanup;
OPAL_OUTPUT_VERBOSE((50, ompi_osc_base_output,
"done creating window %d", ompi_comm_get_cid(module->m_comm)));
return OMPI_SUCCESS;
cleanup:
OBJ_DESTRUCT(&module->m_unlocks_pending);
OBJ_DESTRUCT(&module->m_locks_pending);
OBJ_DESTRUCT(&module->m_queued_sendreqs);
OBJ_DESTRUCT(&module->m_copy_pending_sendreqs);
OBJ_DESTRUCT(&module->m_pending_sendreqs);
OBJ_DESTRUCT(&module->m_acc_lock);
OBJ_DESTRUCT(&module->m_cond);
OBJ_DESTRUCT(&module->m_lock);
if (NULL != module->m_sc_remote_ranks) {
free(module->m_sc_remote_ranks);
}
if (NULL != module->m_sc_remote_active_ranks) {
free(module->m_sc_remote_active_ranks);
}
if (NULL != module->m_fence_coll_counts) {
free(module->m_fence_coll_counts);
}
if (NULL != module->m_copy_num_pending_sendreqs) {
free(module->m_copy_num_pending_sendreqs);
}
if (NULL != module->m_num_pending_sendreqs) {
free(module->m_num_pending_sendreqs);
}
if (NULL != module->m_peer_info) {
for (i = 0 ; i < ompi_comm_size(module->m_comm) ; ++i) {
ompi_osc_rdma_peer_info_free(&module->m_peer_info[i]);
}
free(module->m_peer_info);
}
if (NULL != module->m_comm) ompi_comm_free(&module->m_comm);
if (NULL != module) free(module);
return ret;
}
/* dispatch for callback on message completion */
static void
component_fragment_cb(struct mca_btl_base_module_t *btl,
mca_btl_base_tag_t tag,
mca_btl_base_descriptor_t *descriptor,
void *cbdata)
{
int ret;
ompi_osc_rdma_module_t *module;
void *payload;
bool done = false;
ompi_osc_rdma_base_header_t *base_header =
(ompi_osc_rdma_base_header_t*) descriptor->des_dst[0].seg_addr.pval;
assert(descriptor->des_dst[0].seg_len >=
sizeof(ompi_osc_rdma_base_header_t));
/* handle message */
while (!done) {
switch (base_header->hdr_type) {
case OMPI_OSC_RDMA_HDR_PUT:
{
ompi_osc_rdma_send_header_t *header;
/* get our header and payload */
header = (ompi_osc_rdma_send_header_t*) base_header;
payload = (void*) (header + 1);
#if !defined(WORDS_BIGENDIAN) && OPAL_ENABLE_HETEROGENEOUS_SUPPORT
if (header->hdr_base.hdr_flags & OMPI_OSC_RDMA_HDR_FLAG_NBO) {
OMPI_OSC_RDMA_SEND_HDR_NTOH(*header);
}
#endif
/* get our module pointer */
module = ompi_osc_rdma_windx_to_module(header->hdr_windx);
if (NULL == module) return;
if (!ompi_win_exposure_epoch(module->m_win)) {
if (OMPI_WIN_FENCE & ompi_win_get_mode(module->m_win)) {
/* well, we're definitely in an access epoch now */
ompi_win_set_mode(module->m_win,
OMPI_WIN_FENCE |
OMPI_WIN_ACCESS_EPOCH |
OMPI_WIN_EXPOSE_EPOCH);
}
}
ret = ompi_osc_rdma_sendreq_recv_put(module, header, &payload);
}
break;
case OMPI_OSC_RDMA_HDR_ACC:
{
ompi_osc_rdma_send_header_t *header;
/* get our header and payload */
header = (ompi_osc_rdma_send_header_t*) base_header;
payload = (void*) (header + 1);
#if !defined(WORDS_BIGENDIAN) && OPAL_ENABLE_HETEROGENEOUS_SUPPORT
if (header->hdr_base.hdr_flags & OMPI_OSC_RDMA_HDR_FLAG_NBO) {
OMPI_OSC_RDMA_SEND_HDR_NTOH(*header);
}
#endif
/* get our module pointer */
module = ompi_osc_rdma_windx_to_module(header->hdr_windx);
if (NULL == module) return;
if (!ompi_win_exposure_epoch(module->m_win)) {
if (OMPI_WIN_FENCE & ompi_win_get_mode(module->m_win)) {
/* well, we're definitely in an access epoch now */
ompi_win_set_mode(module->m_win,
OMPI_WIN_FENCE |
OMPI_WIN_ACCESS_EPOCH |
OMPI_WIN_EXPOSE_EPOCH);
}
}
/* receive into temporary buffer */
ret = ompi_osc_rdma_sendreq_recv_accum(module, header, &payload);
}
break;
case OMPI_OSC_RDMA_HDR_GET:
{
ompi_datatype_t *datatype;
ompi_osc_rdma_send_header_t *header;
ompi_osc_rdma_replyreq_t *replyreq;
ompi_proc_t *proc;
/* get our header and payload */
header = (ompi_osc_rdma_send_header_t*) base_header;
payload = (void*) (header + 1);
#if !defined(WORDS_BIGENDIAN) && OPAL_ENABLE_HETEROGENEOUS_SUPPORT
if (header->hdr_base.hdr_flags & OMPI_OSC_RDMA_HDR_FLAG_NBO) {
OMPI_OSC_RDMA_SEND_HDR_NTOH(*header);
}
#endif
/* get our module pointer */
module = ompi_osc_rdma_windx_to_module(header->hdr_windx);
if (NULL == module) return;
if (!ompi_win_exposure_epoch(module->m_win)) {
if (OMPI_WIN_FENCE & ompi_win_get_mode(module->m_win)) {
/* well, we're definitely in an access epoch now */
ompi_win_set_mode(module->m_win,
OMPI_WIN_FENCE |
OMPI_WIN_ACCESS_EPOCH |
OMPI_WIN_EXPOSE_EPOCH);
}
}
/* create or get a pointer to our datatype */
proc = ompi_comm_peer_lookup( module->m_comm, header->hdr_origin );
datatype = ompi_osc_base_datatype_create(proc, &payload);
if (NULL == datatype) {
opal_output(ompi_osc_base_output,
"Error recreating datatype. Aborting.");
ompi_mpi_abort(module->m_comm, 1, false);
}
/* create replyreq sendreq */
ret = ompi_osc_rdma_replyreq_alloc_init(module,
header->hdr_origin,
header->hdr_origin_sendreq,
header->hdr_target_disp,
header->hdr_target_count,
datatype,
&replyreq);
/* send replyreq */
ompi_osc_rdma_replyreq_send(module, replyreq);
/* sendreq does the right retain, so we can release safely */
OBJ_RELEASE(datatype);
}
break;
case OMPI_OSC_RDMA_HDR_REPLY:
{
ompi_osc_rdma_reply_header_t *header;
ompi_osc_rdma_sendreq_t *sendreq;
/* get our header and payload */
header = (ompi_osc_rdma_reply_header_t*) base_header;
payload = (void*) (header + 1);
#if !defined(WORDS_BIGENDIAN) && OPAL_ENABLE_HETEROGENEOUS_SUPPORT
if (header->hdr_base.hdr_flags & OMPI_OSC_RDMA_HDR_FLAG_NBO) {
OMPI_OSC_RDMA_REPLY_HDR_NTOH(*header);
}
#endif
/* get original sendreq pointer */
sendreq = (ompi_osc_rdma_sendreq_t*) header->hdr_origin_sendreq.pval;
module = sendreq->req_module;
/* receive data */
ompi_osc_rdma_replyreq_recv(module, sendreq, header, &payload);
}
break;
case OMPI_OSC_RDMA_HDR_POST:
{
ompi_osc_rdma_control_header_t *header =
(ompi_osc_rdma_control_header_t*) base_header;
int32_t count;
payload = (void*) (header + 1);
#if !defined(WORDS_BIGENDIAN) && OPAL_ENABLE_HETEROGENEOUS_SUPPORT
if (header->hdr_base.hdr_flags & OMPI_OSC_RDMA_HDR_FLAG_NBO) {
OMPI_OSC_RDMA_CONTROL_HDR_NTOH(*header);
}
#endif
/* get our module pointer */
module = ompi_osc_rdma_windx_to_module(header->hdr_windx);
if (NULL == module) return;
OPAL_THREAD_LOCK(&module->m_lock);
count = (module->m_num_post_msgs -= 1);
OPAL_THREAD_UNLOCK(&module->m_lock);
if (count == 0) {
module->m_eager_send_active = module->m_eager_send_ok;
while (module->m_eager_send_active &&
opal_list_get_size(&module->m_pending_sendreqs)) {
ompi_osc_rdma_sendreq_t *sendreq;
OPAL_THREAD_LOCK(&module->m_lock);
sendreq = (ompi_osc_rdma_sendreq_t*)
opal_list_remove_first(&module->m_pending_sendreqs);
if (NULL == sendreq) {
OPAL_THREAD_UNLOCK(&module->m_lock);
break;
}
sendreq->req_module->m_num_pending_out += 1;
OPAL_THREAD_UNLOCK(&module->m_lock);
ret = ompi_osc_rdma_sendreq_send(module, sendreq);
if (OMPI_SUCCESS != ret) {
OPAL_THREAD_LOCK(&module->m_lock);
sendreq->req_module->m_num_pending_out -= 1;
opal_list_append(&(module->m_pending_sendreqs),
(opal_list_item_t*) sendreq);
OPAL_THREAD_UNLOCK(&module->m_lock);
break;
}
}
opal_condition_broadcast(&module->m_cond);
}
}
break;
case OMPI_OSC_RDMA_HDR_COMPLETE:
{
ompi_osc_rdma_control_header_t *header =
(ompi_osc_rdma_control_header_t*) base_header;
int32_t count;
payload = (void*) (header + 1);
#if !defined(WORDS_BIGENDIAN) && OPAL_ENABLE_HETEROGENEOUS_SUPPORT
if (header->hdr_base.hdr_flags & OMPI_OSC_RDMA_HDR_FLAG_NBO) {
OMPI_OSC_RDMA_CONTROL_HDR_NTOH(*header);
}
#endif
/* get our module pointer */
module = ompi_osc_rdma_windx_to_module(header->hdr_windx);
if (NULL == module) return;
/* we've heard from one more place, and have value reqs to
process */
OPAL_THREAD_LOCK(&module->m_lock);
count = (module->m_num_complete_msgs -= 1);
count += (module->m_num_pending_in += header->hdr_value[0]);
OPAL_THREAD_UNLOCK(&module->m_lock);
if (count == 0) opal_condition_broadcast(&module->m_cond);
}
break;
case OMPI_OSC_RDMA_HDR_LOCK_REQ:
{
ompi_osc_rdma_control_header_t *header =
(ompi_osc_rdma_control_header_t*) base_header;
int32_t count;
payload = (void*) (header + 1);
#if !defined(WORDS_BIGENDIAN) && OPAL_ENABLE_HETEROGENEOUS_SUPPORT
if (header->hdr_base.hdr_flags & OMPI_OSC_RDMA_HDR_FLAG_NBO) {
OMPI_OSC_RDMA_CONTROL_HDR_NTOH(*header);
}
#endif
/* get our module pointer */
module = ompi_osc_rdma_windx_to_module(header->hdr_windx);
if (NULL == module) return;
if (header->hdr_value[1] > 0) {
ompi_osc_rdma_passive_lock(module, header->hdr_value[0],
header->hdr_value[1]);
} else {
OPAL_THREAD_LOCK(&module->m_lock);
count = (module->m_lock_received_ack += 1);
OPAL_THREAD_UNLOCK(&module->m_lock);
if (count != 0) opal_condition_broadcast(&module->m_cond);
}
}
break;
case OMPI_OSC_RDMA_HDR_UNLOCK_REQ:
{
ompi_osc_rdma_control_header_t *header =
(ompi_osc_rdma_control_header_t*) base_header;
payload = (void*) (header + 1);
#if !defined(WORDS_BIGENDIAN) && OPAL_ENABLE_HETEROGENEOUS_SUPPORT
if (header->hdr_base.hdr_flags & OMPI_OSC_RDMA_HDR_FLAG_NBO) {
OMPI_OSC_RDMA_CONTROL_HDR_NTOH(*header);
}
#endif
/* get our module pointer */
module = ompi_osc_rdma_windx_to_module(header->hdr_windx);
if (NULL == module) return;
ompi_osc_rdma_passive_unlock(module, header->hdr_value[0],
header->hdr_value[1]);
}
break;
case OMPI_OSC_RDMA_HDR_UNLOCK_REPLY:
{
ompi_osc_rdma_control_header_t *header =
(ompi_osc_rdma_control_header_t*) base_header;
int32_t count;
payload = (void*) (header + 1);
#if !defined(WORDS_BIGENDIAN) && OPAL_ENABLE_HETEROGENEOUS_SUPPORT
if (header->hdr_base.hdr_flags & OMPI_OSC_RDMA_HDR_FLAG_NBO) {
OMPI_OSC_RDMA_CONTROL_HDR_NTOH(*header);
}
#endif
/* get our module pointer */
module = ompi_osc_rdma_windx_to_module(header->hdr_windx);
if (NULL == module) return;
OPAL_THREAD_LOCK(&module->m_lock);
count = (module->m_num_pending_out -= 1);
OPAL_THREAD_UNLOCK(&module->m_lock);
if (count == 0) opal_condition_broadcast(&module->m_cond);
}
break;
case OMPI_OSC_RDMA_HDR_RDMA_COMPLETE:
{
ompi_osc_rdma_control_header_t *header =
(ompi_osc_rdma_control_header_t*) base_header;
int32_t count;
payload = (void*) (header + 1);
#if !defined(WORDS_BIGENDIAN) && OPAL_ENABLE_HETEROGENEOUS_SUPPORT
if (header->hdr_base.hdr_flags & OMPI_OSC_RDMA_HDR_FLAG_NBO) {
OMPI_OSC_RDMA_CONTROL_HDR_NTOH(*header);
}
#endif
/* get our module pointer */
module = ompi_osc_rdma_windx_to_module(header->hdr_windx);
if (NULL == module) return;
OPAL_THREAD_LOCK(&module->m_lock);
count = (module->m_num_pending_in -= header->hdr_value[0]);
OPAL_THREAD_UNLOCK(&module->m_lock);
if (count == 0) opal_condition_broadcast(&module->m_cond);
}
break;
case OMPI_OSC_RDMA_HDR_RDMA_INFO:
{
ompi_osc_rdma_rdma_info_header_t *header =
(ompi_osc_rdma_rdma_info_header_t*) base_header;
ompi_proc_t *proc = NULL;
mca_bml_base_endpoint_t *endpoint = NULL;
mca_bml_base_btl_t *bml_btl;
ompi_osc_rdma_btl_t *rdma_btl;
int origin, index;
payload = (void*) (header + 1);
#if !defined(WORDS_BIGENDIAN) && OPAL_ENABLE_HETEROGENEOUS_SUPPORT
if (header->hdr_base.hdr_flags & OMPI_OSC_RDMA_HDR_FLAG_NBO) {
OMPI_OSC_RDMA_RDMA_INFO_HDR_NTOH(*header);
}
#endif
/* get our module pointer */
module = ompi_osc_rdma_windx_to_module(header->hdr_windx);
if (NULL == module) return;
origin = header->hdr_origin;
/* find the bml_btl */
proc = ompi_comm_peer_lookup(module->m_comm, origin);
endpoint = (mca_bml_base_endpoint_t*) proc->proc_bml;
bml_btl = mca_bml_base_btl_array_find(&endpoint->btl_rdma, btl);
if (NULL == bml_btl) {
opal_output(ompi_osc_base_output,
"received rdma info for unknown btl from rank %d",
origin);
return;
} else {
OPAL_OUTPUT_VERBOSE((1, ompi_osc_base_output,
"received rdma info from rank %d for BTL %s",
origin,
bml_btl->btl->
btl_component->btl_version.
mca_component_name));
}
OPAL_THREAD_LOCK(&module->m_lock);
index = module->m_peer_info[origin].peer_num_btls++;
rdma_btl = &(module->m_peer_info[origin].peer_btls[index]);
memmove (rdma_btl->peer_seg, header + 1, bml_btl->btl->btl_seg_size);
rdma_btl->bml_btl = bml_btl;
rdma_btl->rdma_order = MCA_BTL_NO_ORDER;
rdma_btl->num_sent = 0;
module->m_setup_info->num_btls_callin++;
OPAL_THREAD_UNLOCK(&module->m_lock);
opal_condition_broadcast(&module->m_cond);
}
break;
case OMPI_OSC_RDMA_HDR_MULTI_END:
payload = base_header;
done = true;
break;
default:
/* BWB - FIX ME - this sucks */
opal_output(ompi_osc_base_output,
"received packet for Window with unknown type");
}
if ((base_header->hdr_flags & OMPI_OSC_RDMA_HDR_FLAG_MULTI) != 0) {
/* The next header starts at the next aligned address in
* the buffer. Therefore, check the hdr_flags to see if
* any extra alignment is necessary, and if so, pull value
* from the flags. */
if (base_header->hdr_flags & OMPI_OSC_RDMA_HDR_FLAG_ALIGN_MASK) {
payload = (char *)payload + (base_header->hdr_flags & OMPI_OSC_RDMA_HDR_FLAG_ALIGN_MASK);
}
base_header = (ompi_osc_rdma_base_header_t*) payload;
} else {
done = true;
}
}
}
int
ompi_osc_rdma_component_irecv(void *buf,
size_t count,
struct ompi_datatype_t *datatype,
int src,
int tag,
struct ompi_communicator_t *comm,
ompi_request_t **request,
ompi_request_complete_fn_t callback,
void *cbdata)
{
int ret;
bool missed_callback;
ompi_request_complete_fn_t tmp;
ret = MCA_PML_CALL(irecv(buf, count, datatype,
src, tag, comm, request));
if (OMPI_SUCCESS != ret) return ret;
/* lock the giant request mutex to update the callback data so
that the PML can't mark the request as complete while we're
updating the callback data, which means we can
deterministically ensure the callback is only fired once and
that we didn't miss it. */
OPAL_THREAD_LOCK(&ompi_request_lock);
(*request)->req_complete_cb = callback;
(*request)->req_complete_cb_data = cbdata;
missed_callback = (*request)->req_complete;
OPAL_THREAD_UNLOCK(&ompi_request_lock);
if (missed_callback) {
tmp = (*request)->req_complete_cb;
(*request)->req_complete_cb = NULL;
tmp(*request);
}
return OMPI_SUCCESS;
}
int
ompi_osc_rdma_component_isend(void *buf,
size_t count,
struct ompi_datatype_t *datatype,
int dest,
int tag,
struct ompi_communicator_t *comm,
ompi_request_t **request,
ompi_request_complete_fn_t callback,
void *cbdata)
{
int ret;
bool missed_callback;
ompi_request_complete_fn_t tmp;
ret = MCA_PML_CALL(isend(buf, count, datatype,
dest, tag, MCA_PML_BASE_SEND_STANDARD, comm, request));
if (OMPI_SUCCESS != ret) return ret;
/* lock the giant request mutex to update the callback data so
that the PML can't mark the request as complete while we're
updating the callback data, which means we can
deterministically ensure the callback is only fired once and
that we didn't miss it. */
OPAL_THREAD_LOCK(&ompi_request_lock);
(*request)->req_complete_cb = callback;
(*request)->req_complete_cb_data = cbdata;
missed_callback = (*request)->req_complete;
OPAL_THREAD_UNLOCK(&ompi_request_lock);
if (missed_callback) {
tmp = (*request)->req_complete_cb;
(*request)->req_complete_cb = NULL;
tmp(*request);
}
return OMPI_SUCCESS;
}
/*********** RDMA setup stuff ***********/
struct peer_rdma_send_info_t{
opal_list_item_t super;
ompi_osc_rdma_module_t *module;
ompi_proc_t *proc;
mca_bml_base_btl_t *bml_btl;
void *seg;
};
typedef struct peer_rdma_send_info_t peer_rdma_send_info_t;
OBJ_CLASS_INSTANCE(peer_rdma_send_info_t, opal_list_item_t, NULL, NULL);
static void
rdma_send_info_send_complete(struct mca_btl_base_module_t* btl,
struct mca_btl_base_endpoint_t *endpoint,
struct mca_btl_base_descriptor_t* descriptor,
int status)
{
peer_rdma_send_info_t *peer_send_info =
(peer_rdma_send_info_t*) descriptor->des_cbdata;
if (OMPI_SUCCESS == status) {
btl->btl_free(btl, descriptor);
OPAL_THREAD_LOCK(&peer_send_info->module->m_lock);
peer_send_info->module->m_setup_info->num_btls_outgoing--;
OPAL_THREAD_UNLOCK(&peer_send_info->module->m_lock);
opal_condition_broadcast(&(peer_send_info->module->m_cond));
OBJ_RELEASE(peer_send_info);
} else {
/* BWB - fix me */
abort();
}
}
static int
rdma_send_info_send(ompi_osc_rdma_module_t *module,
peer_rdma_send_info_t *peer_send_info)
{
int ret = OMPI_SUCCESS;
mca_bml_base_btl_t *bml_btl = NULL;
mca_btl_base_descriptor_t *descriptor = NULL;
ompi_osc_rdma_rdma_info_header_t *header = NULL;
size_t hdr_size;
bml_btl = peer_send_info->bml_btl;
hdr_size = sizeof(ompi_osc_rdma_rdma_info_header_t) + bml_btl->btl->btl_seg_size;
mca_bml_base_alloc(bml_btl, &descriptor, MCA_BTL_NO_ORDER, hdr_size,
MCA_BTL_DES_FLAGS_PRIORITY | MCA_BTL_DES_SEND_ALWAYS_CALLBACK);
if (NULL == descriptor) {
ret = OMPI_ERR_TEMP_OUT_OF_RESOURCE;
goto cleanup;
}
/* verify at least enough space for header */
if (descriptor->des_src[0].seg_len < hdr_size) {
ret = OMPI_ERR_OUT_OF_RESOURCE;
goto cleanup;
}
/* setup descriptor */
descriptor->des_cbfunc = rdma_send_info_send_complete;
descriptor->des_cbdata = peer_send_info;
descriptor->des_src[0].seg_len = sizeof(ompi_osc_rdma_rdma_info_header_t);
/* pack header */
header = (ompi_osc_rdma_rdma_info_header_t*) descriptor->des_src[0].seg_addr.pval;
header->hdr_base.hdr_type = OMPI_OSC_RDMA_HDR_RDMA_INFO;
header->hdr_base.hdr_flags = 0;
header->hdr_origin = ompi_comm_rank(module->m_comm);
header->hdr_windx = ompi_comm_get_cid(module->m_comm);
memmove (header + 1, peer_send_info->seg, bml_btl->btl->btl_seg_size);
#ifdef WORDS_BIGENDIAN
header->hdr_base.hdr_flags |= OMPI_OSC_RDMA_HDR_FLAG_NBO;
#elif OPAL_ENABLE_HETEROGENEOUS_SUPPORT
if (peer_send_info->proc->proc_arch & OPAL_ARCH_ISBIGENDIAN) {
header->hdr_base.hdr_flags |= OMPI_OSC_RDMA_HDR_FLAG_NBO;
OMPI_OSC_RDMA_RDMA_INFO_HDR_HTON(*header);
}
#endif
/* send fragment */
ret = mca_bml_base_send(bml_btl, descriptor, MCA_BTL_TAG_OSC_RDMA);
if (1 == ret) ret = OMPI_SUCCESS;
goto done;
cleanup:
if (descriptor != NULL) {
mca_bml_base_free(bml_btl, descriptor);
}
done:
return ret;
}
static bool
is_valid_rdma(mca_bml_base_btl_t *bml_btl)
{
if ((bml_btl->btl->btl_put != NULL) &&
(bml_btl->btl->btl_get != NULL) &&
((bml_btl->btl_flags & MCA_BTL_FLAGS_RDMA_MATCHED) == 0)) {
return true;
}
return false;
}
static int
setup_rdma(ompi_osc_rdma_module_t *module)
{
uint64_t local;
uint64_t *remote = NULL;
MPI_Datatype ui64_type;
int ret = OMPI_SUCCESS;
int i;
#if SIZEOF_LONG == 8
ui64_type = MPI_LONG;
#else
ui64_type = MPI_LONG_LONG;
#endif
/* create a setup info structure */
module->m_setup_info = (ompi_osc_rdma_setup_info_t *) malloc(sizeof(ompi_osc_rdma_setup_info_t));
if (NULL == module->m_setup_info) {
ret = OMPI_ERR_TEMP_OUT_OF_RESOURCE;
goto cleanup;
}
module->m_setup_info->num_btls_callin = 0;
module->m_setup_info->num_btls_expected = -1;
module->m_setup_info->num_btls_outgoing = 0;
module->m_setup_info->outstanding_btl_requests =
(opal_list_t *) malloc(sizeof(opal_list_t) * ompi_comm_size(module->m_comm));
if (NULL == module->m_setup_info->outstanding_btl_requests) {
ret = OMPI_ERR_TEMP_OUT_OF_RESOURCE;
goto cleanup;
}
for (i = 0 ; i < ompi_comm_size(module->m_comm) ; ++i) {
OBJ_CONSTRUCT(&(module->m_setup_info->outstanding_btl_requests[i]),
opal_list_t);
}
/* create peer info array */
module->m_peer_info = (ompi_osc_rdma_peer_info_t*)
malloc(sizeof(ompi_osc_rdma_peer_info_t) *
ompi_comm_size(module->m_comm));
if (NULL == module->m_peer_info) {
ret = OMPI_ERR_TEMP_OUT_OF_RESOURCE;
goto cleanup;
}
memset(module->m_peer_info, 0,
sizeof(ompi_osc_rdma_peer_info_t) * ompi_comm_size(module->m_comm));
/* get number of btls to each peer, descriptors for the window for
each peer */
for (i = 0 ; i < ompi_comm_size(module->m_comm) ; ++i) {
ompi_proc_t *proc = ompi_comm_peer_lookup(module->m_comm, i);
ompi_osc_rdma_peer_info_t *peer_info = &module->m_peer_info[i];
mca_bml_base_endpoint_t *endpoint =
(mca_bml_base_endpoint_t*) proc->proc_bml;
int num_avail =
mca_bml_base_btl_array_get_size(&endpoint->btl_rdma);
size_t j, size;
- Split the datatype engine into two parts: an MPI specific part in OMPI and a language agnostic part in OPAL. The convertor is completely moved into OPAL. This offers several benefits as described in RFC http://www.open-mpi.org/community/lists/devel/2009/07/6387.php namely: - Fewer basic types (int* and float* types, boolean and wchar - Fixing naming scheme to ompi-nomenclature. - Usability outside of the ompi-layer. - Due to the fixed nature of simple opal types, their information is completely known at compile time and therefore constified - With fewer datatypes (22), the actual sizes of bit-field types may be reduced from 64 to 32 bits, allowing reorganizing the opal_datatype structure, eliminating holes and keeping data required in convertor (upon send/recv) in one cacheline... This has implications to the convertor-datastructure and other parts of the code. - Several performance tests have been run, the netpipe latency does not change with this patch on Linux/x86-64 on the smoky cluster. - Extensive tests have been done to verify correctness (no new regressions) using: 1. mpi_test_suite on linux/x86-64 using clean ompi-trunk and ompi-ddt: a. running both trunk and ompi-ddt resulted in no differences (except for MPI_SHORT_INT and MPI_TYPE_MIX_LB_UB do now run correctly). b. with --enable-memchecker and running under valgrind (one buglet when run with static found in test-suite, commited) 2. ibm testsuite on linux/x86-64 using clean ompi-trunk and ompi-ddt: all passed (except for the dynamic/ tests failed!! as trunk/MTT) 3. compilation and usage of HDF5 tests on Jaguar using PGI and PathScale compilers. 4. compilation and usage on Scicortex. - Please note, that for the heterogeneous case, (-m32 compiled binaries/ompi), neither ompi-trunk, nor ompi-ddt branch would successfully launch. This commit was SVN r21641.
2009-07-13 08:56:31 +04:00
opal_convertor_t convertor;
/* skip peer if heterogeneous */
if (ompi_proc_local()->proc_arch != proc->proc_arch) {
continue;
}
/* get a rough estimation of how many BTLs we'll be able to
use, and exit if the answer is none */
for (j = 0 ;
j < mca_bml_base_btl_array_get_size(&endpoint->btl_rdma) ;
++j) {
mca_bml_base_btl_t *bml_btl =
mca_bml_base_btl_array_get_index(&endpoint->btl_rdma, j);
if (!is_valid_rdma(bml_btl)) num_avail--;
}
if (0 == num_avail) continue;
/* Allocate space for all the useable BTLs. They might not
all end up useable, if we can't pin memory for the btl or
the like. But the number of elements to start with should
be small and the number that fail the pin test should be
approximately 0, so this isn't too big of a waste */
peer_info->peer_btls = (ompi_osc_rdma_btl_t*)
malloc(sizeof(ompi_osc_rdma_btl_t) * num_avail);
peer_info->local_btls = (mca_bml_base_btl_t**)
malloc(sizeof(mca_bml_base_btl_t*) * num_avail);
peer_info->local_registrations = (mca_mpool_base_registration_t**)
malloc(sizeof(mca_mpool_base_registration_t*) * num_avail);
peer_info->local_descriptors = (mca_btl_base_descriptor_t**)
malloc(sizeof(mca_btl_base_descriptor_t*) * num_avail);
if (NULL == peer_info->peer_btls ||
NULL == peer_info->local_btls ||
NULL == peer_info->local_registrations ||
NULL == peer_info->local_descriptors) {
ret = OMPI_ERR_TEMP_OUT_OF_RESOURCE;
goto cleanup;
}
memset(peer_info->peer_btls, 0,
sizeof(ompi_osc_rdma_btl_t) * num_avail);
memset(peer_info->local_registrations, 0,
sizeof(mca_mpool_base_registration_t*) * num_avail);
memset(peer_info->local_descriptors, 0,
sizeof(mca_btl_base_descriptor_t*) * num_avail);
- Split the datatype engine into two parts: an MPI specific part in OMPI and a language agnostic part in OPAL. The convertor is completely moved into OPAL. This offers several benefits as described in RFC http://www.open-mpi.org/community/lists/devel/2009/07/6387.php namely: - Fewer basic types (int* and float* types, boolean and wchar - Fixing naming scheme to ompi-nomenclature. - Usability outside of the ompi-layer. - Due to the fixed nature of simple opal types, their information is completely known at compile time and therefore constified - With fewer datatypes (22), the actual sizes of bit-field types may be reduced from 64 to 32 bits, allowing reorganizing the opal_datatype structure, eliminating holes and keeping data required in convertor (upon send/recv) in one cacheline... This has implications to the convertor-datastructure and other parts of the code. - Several performance tests have been run, the netpipe latency does not change with this patch on Linux/x86-64 on the smoky cluster. - Extensive tests have been done to verify correctness (no new regressions) using: 1. mpi_test_suite on linux/x86-64 using clean ompi-trunk and ompi-ddt: a. running both trunk and ompi-ddt resulted in no differences (except for MPI_SHORT_INT and MPI_TYPE_MIX_LB_UB do now run correctly). b. with --enable-memchecker and running under valgrind (one buglet when run with static found in test-suite, commited) 2. ibm testsuite on linux/x86-64 using clean ompi-trunk and ompi-ddt: all passed (except for the dynamic/ tests failed!! as trunk/MTT) 3. compilation and usage of HDF5 tests on Jaguar using PGI and PathScale compilers. 4. compilation and usage on Scicortex. - Please note, that for the heterogeneous case, (-m32 compiled binaries/ompi), neither ompi-trunk, nor ompi-ddt branch would successfully launch. This commit was SVN r21641.
2009-07-13 08:56:31 +04:00
OBJ_CONSTRUCT(&convertor, opal_convertor_t);
/* Find all useable btls, try to do the descriptor thing for
them, and store all that information */
for (j = 0 ;
j < mca_bml_base_btl_array_get_size(&endpoint->btl_rdma) ;
++j) {
mca_bml_base_btl_t *bml_btl =
mca_bml_base_btl_array_get_index(&endpoint->btl_rdma, j);
mca_mpool_base_module_t *btl_mpool = bml_btl->btl->btl_mpool;
int index = peer_info->local_num_btls;
if (!is_valid_rdma(bml_btl)) continue;
if (NULL != btl_mpool) {
ret = btl_mpool->mpool_register(btl_mpool, module->m_win->w_baseptr,
module->m_win->w_size, 0,
&(peer_info->local_registrations[index]));
if (OMPI_SUCCESS != ret) continue;
} else {
peer_info->local_registrations[index] = NULL;
}
size = module->m_win->w_size;
- Split the datatype engine into two parts: an MPI specific part in OMPI and a language agnostic part in OPAL. The convertor is completely moved into OPAL. This offers several benefits as described in RFC http://www.open-mpi.org/community/lists/devel/2009/07/6387.php namely: - Fewer basic types (int* and float* types, boolean and wchar - Fixing naming scheme to ompi-nomenclature. - Usability outside of the ompi-layer. - Due to the fixed nature of simple opal types, their information is completely known at compile time and therefore constified - With fewer datatypes (22), the actual sizes of bit-field types may be reduced from 64 to 32 bits, allowing reorganizing the opal_datatype structure, eliminating holes and keeping data required in convertor (upon send/recv) in one cacheline... This has implications to the convertor-datastructure and other parts of the code. - Several performance tests have been run, the netpipe latency does not change with this patch on Linux/x86-64 on the smoky cluster. - Extensive tests have been done to verify correctness (no new regressions) using: 1. mpi_test_suite on linux/x86-64 using clean ompi-trunk and ompi-ddt: a. running both trunk and ompi-ddt resulted in no differences (except for MPI_SHORT_INT and MPI_TYPE_MIX_LB_UB do now run correctly). b. with --enable-memchecker and running under valgrind (one buglet when run with static found in test-suite, commited) 2. ibm testsuite on linux/x86-64 using clean ompi-trunk and ompi-ddt: all passed (except for the dynamic/ tests failed!! as trunk/MTT) 3. compilation and usage of HDF5 tests on Jaguar using PGI and PathScale compilers. 4. compilation and usage on Scicortex. - Please note, that for the heterogeneous case, (-m32 compiled binaries/ompi), neither ompi-trunk, nor ompi-ddt branch would successfully launch. This commit was SVN r21641.
2009-07-13 08:56:31 +04:00
opal_convertor_copy_and_prepare_for_send(proc->proc_convertor,
&(ompi_mpi_byte.dt.super),
module->m_win->w_size,
module->m_win->w_baseptr,
0,
&convertor);
mca_bml_base_prepare_dst(bml_btl,
peer_info->local_registrations[index],
&convertor, MCA_BTL_NO_ORDER, 0, &size, 0,
&peer_info->local_descriptors[index]);
if (NULL == peer_info->local_descriptors[index]) {
if (NULL != peer_info->local_registrations[index]) {
btl_mpool->mpool_deregister(btl_mpool,
peer_info->local_registrations[index]);
}
- Split the datatype engine into two parts: an MPI specific part in OMPI and a language agnostic part in OPAL. The convertor is completely moved into OPAL. This offers several benefits as described in RFC http://www.open-mpi.org/community/lists/devel/2009/07/6387.php namely: - Fewer basic types (int* and float* types, boolean and wchar - Fixing naming scheme to ompi-nomenclature. - Usability outside of the ompi-layer. - Due to the fixed nature of simple opal types, their information is completely known at compile time and therefore constified - With fewer datatypes (22), the actual sizes of bit-field types may be reduced from 64 to 32 bits, allowing reorganizing the opal_datatype structure, eliminating holes and keeping data required in convertor (upon send/recv) in one cacheline... This has implications to the convertor-datastructure and other parts of the code. - Several performance tests have been run, the netpipe latency does not change with this patch on Linux/x86-64 on the smoky cluster. - Extensive tests have been done to verify correctness (no new regressions) using: 1. mpi_test_suite on linux/x86-64 using clean ompi-trunk and ompi-ddt: a. running both trunk and ompi-ddt resulted in no differences (except for MPI_SHORT_INT and MPI_TYPE_MIX_LB_UB do now run correctly). b. with --enable-memchecker and running under valgrind (one buglet when run with static found in test-suite, commited) 2. ibm testsuite on linux/x86-64 using clean ompi-trunk and ompi-ddt: all passed (except for the dynamic/ tests failed!! as trunk/MTT) 3. compilation and usage of HDF5 tests on Jaguar using PGI and PathScale compilers. 4. compilation and usage on Scicortex. - Please note, that for the heterogeneous case, (-m32 compiled binaries/ompi), neither ompi-trunk, nor ompi-ddt branch would successfully launch. This commit was SVN r21641.
2009-07-13 08:56:31 +04:00
opal_convertor_cleanup(&convertor);
continue;
}
peer_info->local_btls[index] = bml_btl;
- Split the datatype engine into two parts: an MPI specific part in OMPI and a language agnostic part in OPAL. The convertor is completely moved into OPAL. This offers several benefits as described in RFC http://www.open-mpi.org/community/lists/devel/2009/07/6387.php namely: - Fewer basic types (int* and float* types, boolean and wchar - Fixing naming scheme to ompi-nomenclature. - Usability outside of the ompi-layer. - Due to the fixed nature of simple opal types, their information is completely known at compile time and therefore constified - With fewer datatypes (22), the actual sizes of bit-field types may be reduced from 64 to 32 bits, allowing reorganizing the opal_datatype structure, eliminating holes and keeping data required in convertor (upon send/recv) in one cacheline... This has implications to the convertor-datastructure and other parts of the code. - Several performance tests have been run, the netpipe latency does not change with this patch on Linux/x86-64 on the smoky cluster. - Extensive tests have been done to verify correctness (no new regressions) using: 1. mpi_test_suite on linux/x86-64 using clean ompi-trunk and ompi-ddt: a. running both trunk and ompi-ddt resulted in no differences (except for MPI_SHORT_INT and MPI_TYPE_MIX_LB_UB do now run correctly). b. with --enable-memchecker and running under valgrind (one buglet when run with static found in test-suite, commited) 2. ibm testsuite on linux/x86-64 using clean ompi-trunk and ompi-ddt: all passed (except for the dynamic/ tests failed!! as trunk/MTT) 3. compilation and usage of HDF5 tests on Jaguar using PGI and PathScale compilers. 4. compilation and usage on Scicortex. - Please note, that for the heterogeneous case, (-m32 compiled binaries/ompi), neither ompi-trunk, nor ompi-ddt branch would successfully launch. This commit was SVN r21641.
2009-07-13 08:56:31 +04:00
opal_convertor_cleanup(&convertor);
peer_info->local_num_btls++;
module->m_setup_info->num_btls_outgoing++;
}
OBJ_DESTRUCT(&convertor);
}
/* fill in information about remote peers */
remote = (uint64_t *) malloc(sizeof(uint64_t) * ompi_comm_size(module->m_comm));
if (NULL == remote) {
ret = OMPI_ERR_TEMP_OUT_OF_RESOURCE;
goto cleanup;
}
local = ompi_ptr_ptol(module->m_win->w_baseptr);
ret = module->m_comm->c_coll.coll_allgather(&local, 1, ui64_type,
remote, 1, ui64_type,
module->m_comm,
module->m_comm->c_coll.coll_allgather_module);
if (OMPI_SUCCESS != ret) goto cleanup;
for (i = 0 ; i < ompi_comm_size(module->m_comm) ; ++i) {
module->m_peer_info[i].peer_base = remote[i];
}
local = module->m_win->w_size;
ret = module->m_comm->c_coll.coll_allgather(&local, 1, ui64_type,
remote, 1, ui64_type,
module->m_comm,
module->m_comm->c_coll.coll_allgather_module);
if (OMPI_SUCCESS != ret) goto cleanup;
for (i = 0 ; i < ompi_comm_size(module->m_comm) ; ++i) {
module->m_peer_info[i].peer_len = remote[i];
}
/* get number of btls we're expecting from everyone */
for (i = 0 ; i < ompi_comm_size(module->m_comm) ; ++i) {
remote[i] = module->m_peer_info[i].local_num_btls;
}
ret = module->m_comm->c_coll.coll_reduce_scatter(remote,
&local,
module->m_fence_coll_counts,
ui64_type,
MPI_SUM,
module->m_comm,
module->m_comm->c_coll.coll_reduce_scatter_module);
if (OMPI_SUCCESS != ret) goto cleanup;
module->m_setup_info->num_btls_expected = (int32_t)local;
/* end fill in information about remote peers */
/* send our contact info to everyone... */
for (i = 0 ; i < ompi_comm_size(module->m_comm) ; ++i) {
ompi_osc_rdma_peer_info_t *peer_info = &module->m_peer_info[i];
int j;
for (j = 0 ; j < peer_info->local_num_btls ; ++j) {
peer_rdma_send_info_t *peer_send_info =
OBJ_NEW(peer_rdma_send_info_t);
peer_send_info->module = module;
peer_send_info->proc = ompi_comm_peer_lookup(module->m_comm, i);
peer_send_info->bml_btl = peer_info->local_btls[j];
peer_send_info->seg = (void *) peer_info->local_descriptors[j]->des_dst;
ret = rdma_send_info_send(module, peer_send_info);
if (OMPI_SUCCESS != ret) {
opal_list_append(&(module->m_setup_info->outstanding_btl_requests[i]),
&peer_send_info->super);
}
}
}
OPAL_THREAD_LOCK(&module->m_lock);
while ((module->m_setup_info->num_btls_outgoing != 0) ||
(module->m_setup_info->num_btls_expected !=
module->m_setup_info->num_btls_callin)) {
for (i = 0 ; i < ompi_comm_size(module->m_comm) ; ++i) {
peer_rdma_send_info_t *peer_send_info =
(peer_rdma_send_info_t*) opal_list_remove_first(&module->m_setup_info->outstanding_btl_requests[i]);
if (NULL != peer_send_info) {
ret = rdma_send_info_send(module, peer_send_info);
if (OMPI_SUCCESS != ret) {
opal_list_append(&(module->m_setup_info->outstanding_btl_requests[i]),
&peer_send_info->super);
}
}
}
opal_condition_wait(&module->m_cond, &module->m_lock);
}
OPAL_THREAD_UNLOCK(&module->m_lock);
ret = OMPI_SUCCESS;
cleanup:
if (NULL != module->m_setup_info) {
if (NULL != module->m_setup_info->outstanding_btl_requests) {
for (i = 0 ; i < ompi_comm_size(module->m_comm) ; ++i) {
OBJ_DESTRUCT(&(module->m_setup_info->outstanding_btl_requests[i]));
}
free(module->m_setup_info->outstanding_btl_requests);
}
free(module->m_setup_info);
}
if (NULL != remote) free(remote);
return ret;
}