1
1
openmpi/ompi/mca/bcol/basesmuma/bcol_basesmuma_module.c

691 строка
25 KiB
C
Исходник Обычный вид История

coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/* -*- Mode: C; c-basic-offset:4 ; indent-tabs-mode:nil -*- */
/*
* Copyright (c) 2009-2012 Oak Ridge National Laboratory. All rights reserved.
* Copyright (c) 2009-2012 Mellanox Technologies. All rights reserved.
* Copyright (c) 2012-2014 Los Alamos National Security, LLC. All rights
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
* reserved.
* Copyright (c) 2014 Research Organization for Information Science
* and Technology (RIST). All rights reserved.
* $COPYRIGHT$
*
* Additional copyrights may follow
*
* $HEADER$
*/
/**
* @file
*
*/
#include "ompi_config.h"
#include "ompi/constants.h"
#include "ompi/communicator/communicator.h"
#include "ompi/mca/bcol/bcol.h"
#include "ompi/mca/bcol/base/base.h"
#include "ompi/patterns/net/netpatterns.h"
#include "opal/util/show_help.h"
#include "opal/align.h"
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
#include "ompi/mca/bcol/basesmuma/bcol_basesmuma_reduce.h"
#include "bcol_basesmuma.h"
#include "bcol_basesmuma_utils.h"
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
#ifdef __PORTALS_AVAIL__
#include "bcol_basesmuma_portals.h"
#endif
/*
* Local functions
*/
static int alloc_lmsg_reduce_offsets_array(mca_bcol_basesmuma_module_t *sm_module)
{
int rc = OMPI_SUCCESS, i = 0;
netpatterns_k_exchange_node_t *k_node = &sm_module->knomial_exchange_tree;
int n_exchanges = k_node->n_exchanges;
/* Precalculate the allreduce offsets */
if (0 < k_node->n_exchanges) {
sm_module->reduce_offsets = (int **)malloc(n_exchanges * sizeof(int*));
if (!sm_module->reduce_offsets) {
rc = OMPI_ERROR;
return rc;
}
for (i=0; i < n_exchanges ; i++) {
sm_module->reduce_offsets[i] = (int *)malloc (sizeof(int) * NOFFSETS);
if (!sm_module->reduce_offsets[i]){
rc = OMPI_ERROR;
return rc;
}
}
}
return rc;
}
static int free_lmsg_reduce_offsets_array(mca_bcol_basesmuma_module_t *sm_module)
{
int rc = OMPI_SUCCESS, i = 0;
netpatterns_k_exchange_node_t *k_node = &sm_module->knomial_exchange_tree;
int n_exchanges = k_node->n_exchanges;
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
if (sm_module->reduce_offsets) {
for (i=0; i < n_exchanges; i++) {
free (sm_module->reduce_offsets[i]);
}
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
free(sm_module->reduce_offsets);
}
return rc;
}
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
static void
mca_bcol_basesmuma_module_construct(mca_bcol_basesmuma_module_t *module)
{
/* initialize all values to 0 */
memset((void*)((uintptr_t) module + sizeof (module->super)), 0, sizeof (*module) - sizeof (module->super));
module->super.bcol_component = (mca_bcol_base_component_t *) &mca_bcol_basesmuma_component;
module->super.list_n_connected = NULL;
module->super.hier_scather_offset = 0;
}
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
static void
mca_bcol_basesmuma_module_destruct(mca_bcol_basesmuma_module_t *sm_module)
{
/* local variables */
int i;
mca_bcol_basesmuma_component_t *cs = &mca_bcol_basesmuma_component;
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/*
* release allocated resrouces
*/
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/* ...but not until you're sure you have no outstanding collectives */
while(0 != opal_list_get_size(&(cs->nb_admin_barriers))) {
opal_progress();
}
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
#ifdef __PORTALS_AVAIL__
/* Remove portals bcast specific resources */
if ( PTL_OK != PtlEQFree(sm_module->sg_state.read_eq)) {
BASESMUMA_VERBOSE(10,("PtlEQFree() failed: )"));
}
#endif
/* Remove Lmsg Reduce Offsets Array */
free_lmsg_reduce_offsets_array(sm_module);
/* collective topology data */
if( sm_module->fanout_read_tree) {
for(i=0 ; i < sm_module->super.size_of_subgroup ; i++ ) {
if(0 < sm_module->fanout_read_tree[i].n_children ) {
free(sm_module->fanout_read_tree[i].children_ranks);
sm_module->fanout_read_tree[i].children_ranks=NULL;
}
}
free(sm_module->fanout_read_tree);
sm_module->fanout_read_tree=NULL;
}
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/* gvm Leak FIX Reduction_tree[].children_ranks has
* to be removed. I don't how to get the size (which is
* size of subgroup) of array reduction_tree
*/
if( sm_module->reduction_tree) {
for(i=0 ; i < sm_module->super.size_of_subgroup ; i++ ) {
if(0 < sm_module->reduction_tree[i].n_children ) {
free(sm_module->reduction_tree[i].children_ranks);
sm_module->reduction_tree[i].children_ranks=NULL;
}
}
free(sm_module->reduction_tree);
sm_module->reduction_tree=NULL;
}
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/* gvm Leak FIX */
if (sm_module->fanout_node.children_ranks){
free(sm_module->fanout_node.children_ranks);
sm_module->fanout_node.children_ranks = NULL;
}
if (sm_module->fanin_node.children_ranks){
free(sm_module->fanin_node.children_ranks);
sm_module->fanin_node.children_ranks = NULL;
}
/* colls_no_user_data resrouces */
if(sm_module->colls_no_user_data.ctl_buffs_mgmt){
free(sm_module->colls_no_user_data.ctl_buffs_mgmt);
sm_module->colls_no_user_data.ctl_buffs_mgmt=NULL;
}
if(sm_module->colls_no_user_data.ctl_buffs){
free(sm_module->colls_no_user_data.ctl_buffs);
sm_module->colls_no_user_data.ctl_buffs=NULL;
}
/* return control */
opal_list_append (&cs->ctl_structures, (opal_list_item_t *) sm_module->no_userdata_ctl);
/* colls_with_user_data resrouces */
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/*
*debug print */
/*
fprintf(stderr,"AAA colls_with_user_data.ctl_buffs %p \n",
sm_module->colls_with_user_data.ctl_buffs_mgmt);
end debug */
if(sm_module->colls_with_user_data.ctl_buffs_mgmt){
free(sm_module->colls_with_user_data.ctl_buffs_mgmt);
sm_module->colls_with_user_data.ctl_buffs_mgmt=NULL;
}
if(sm_module->colls_with_user_data.ctl_buffs){
free(sm_module->colls_with_user_data.ctl_buffs);
sm_module->colls_with_user_data.ctl_buffs=NULL;
}
if(sm_module->shared_memory_scratch_space) {
free(sm_module->shared_memory_scratch_space);
sm_module->shared_memory_scratch_space=NULL;
}
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/* return control */
opal_list_append (&cs->ctl_structures, (opal_list_item_t *) sm_module->userdata_ctl);
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
#if 1
if(sm_module->scatter_kary_tree) {
for(i=0 ; i < sm_module->super.size_of_subgroup ; i++ ) {
if(0 < sm_module->scatter_kary_tree[i].n_children) {
free(sm_module->scatter_kary_tree[i].children_ranks);
sm_module->scatter_kary_tree[i].children_ranks=NULL;
}
}
free(sm_module->scatter_kary_tree);
}
#endif
if(NULL != sm_module->super.list_n_connected ){
free(sm_module->super.list_n_connected);
sm_module->super.list_n_connected = NULL;
}
cleanup_nb_coll_buff_desc(&sm_module->ml_mem.nb_coll_desc,
sm_module->ml_mem.num_banks,
sm_module->ml_mem.num_buffers_per_bank);
for (i = 0; i < BCOL_NUM_OF_FUNCTIONS; i++){
/* gvm FIX: Go through the list and destroy each item */
/* Destroy the function table object for each bcol type list */
OPAL_LIST_DESTRUCT((&sm_module->super.bcol_fns_table[i]));
}
if (NULL != sm_module->payload_backing_files_info) {
free(sm_module->payload_backing_files_info);
sm_module->payload_backing_files_info = NULL;
}
if (NULL != sm_module->ctl_backing_files_info) {
free(sm_module->ctl_backing_files_info);
sm_module->ctl_backing_files_info = NULL;
}
if (NULL != sm_module->ml_mem.bank_release_counter) {
free(sm_module->ml_mem.bank_release_counter);
sm_module->ml_mem.bank_release_counter = NULL;
}
if (NULL != sm_module->colls_with_user_data.data_buffs) {
free((void *)sm_module->colls_with_user_data.data_buffs);
sm_module->colls_with_user_data.data_buffs = NULL;
}
/* free the k-nomial allgather tree here */
netpatterns_cleanup_recursive_knomial_allgather_tree_node(&sm_module->knomial_allgather_tree);
netpatterns_cleanup_recursive_doubling_tree_node(&sm_module->recursive_doubling_tree);
netpatterns_cleanup_recursive_knomial_tree_node(&sm_module->knomial_exchange_tree);
/* done */
}
static void bcol_basesmuma_set_small_msg_thresholds(struct mca_bcol_base_module_t *super)
{
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
mca_bcol_basesmuma_module_t *basesmuma_module =
(mca_bcol_basesmuma_module_t *) super;
size_t basesmuma_offset = bcol_basesmuma_data_offset_calc(basesmuma_module);
/* Set the Allreduce threshold, for Basesmuma it equals to ML buffer size - data offset */
super->small_message_thresholds[BCOL_ALLREDUCE] =
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
basesmuma_module->ml_mem.ml_mem_desc->size_buffer - basesmuma_offset;
/* Set the Bcast threshold, for Basesmuma it equals to ML buffer size - data offset */
super->small_message_thresholds[BCOL_BCAST] =
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
basesmuma_module->ml_mem.ml_mem_desc->size_buffer - basesmuma_offset;
/* Set the Gather threshold, for Basesmuma it equals to ML buffer size - data offset */
super->small_message_thresholds[BCOL_GATHER] =
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
(basesmuma_module->ml_mem.ml_mem_desc->size_buffer - basesmuma_offset) /
ompi_comm_size(basesmuma_module->super.sbgp_partner_module->group_comm);
/* Set the ALLgather threshold, for Basesmuma it equals to ML buffer size - data offset */
super->small_message_thresholds[BCOL_ALLGATHER] =
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
(basesmuma_module->ml_mem.ml_mem_desc->size_buffer - basesmuma_offset) /
ompi_comm_size(basesmuma_module->super.sbgp_partner_module->group_comm);
/* Set the Reduce threshold, for Basesmuma it equals to ML buffer size - data offset */
super->small_message_thresholds[BCOL_REDUCE] =
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
basesmuma_module->ml_mem.ml_mem_desc->size_buffer - basesmuma_offset;
/* Set the Scatter threshold, for Basesmuma it equals to ML buffer size - data offset */
super->small_message_thresholds[BCOL_SCATTER] =
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
basesmuma_module->ml_mem.ml_mem_desc->size_buffer - basesmuma_offset;
}
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/* setup memory management and collective routines */
static void load_func(mca_bcol_base_module_t *super)
{
int fnc;
/* Loading memory management and collective functions */
for (fnc = 0; fnc < BCOL_NUM_OF_FUNCTIONS; fnc++) {
super->bcol_function_table[fnc] = NULL;
}
/*super->bcol_function_table[BCOL_BARRIER] = bcol_basesmuma_recursive_double_barrier;*/
#ifdef __PORTALS_AVAIL__
super->bcol_function_table[BCOL_BCAST] = bcol_basesmuma_lmsg_scatter_allgather_portals_bcast;
/* super->bcol_function_table[BCOL_BCAST] =
bcol_basesmuma_lmsg_bcast_k_nomial_anyroot; */
#endif
/*super->bcol_function_table[BCOL_BCAST] = bcol_basesmuma_bcast;*/
/*super->bcol_function_table[BCOL_BCAST] = bcol_basesmuma_binary_scatter_allgather_segment;*/
/*super->bcol_function_table[BCOL_BCAST] = bcol_basesmuma_bcast_k_nomial_anyroot;*/
super->bcol_function_table[BCOL_BCAST] = bcol_basesmuma_bcast;
#ifdef __PORTALS_AVAIL__
super->bcol_function_table[BCOL_BCAST] =
bcol_basesmuma_lmsg_scatter_allgather_portals_bcast;
#endif
/* super->bcol_function_table[BCOL_ALLREDUCE] = bcol_basesmuma_allreduce_intra_fanin_fanout; */
super->bcol_function_table[BCOL_ALLREDUCE] = bcol_basesmuma_allreduce_intra_recursive_doubling;
super->bcol_function_table[BCOL_REDUCE] = bcol_basesmuma_reduce_intra_fanin_old;
/* memory management */
super->bcol_memory_init = bcol_basesmuma_bank_init_opti;
super->k_nomial_tree = bcol_basesmuma_setup_knomial_tree;
/* Set thresholds */
super->set_small_msg_thresholds = bcol_basesmuma_set_small_msg_thresholds;
}
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
static void load_func_with_choices(mca_bcol_base_module_t *super)
{
int fnc;
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/* Loading memory management and collective functions */
for (fnc=0; fnc < BCOL_NUM_OF_FUNCTIONS; fnc++) {
super->bcol_function_init_table[fnc] = NULL;
}
super->bcol_function_init_table[BCOL_FANIN] = bcol_basesmuma_fanin_init;
super->bcol_function_init_table[BCOL_FANOUT] = bcol_basesmuma_fanout_init;
super->bcol_function_init_table[BCOL_BARRIER] = bcol_basesmuma_barrier_init;
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
super->bcol_function_init_table[BCOL_BCAST] = bcol_basesmuma_bcast_init;
super->bcol_function_init_table[BCOL_ALLREDUCE] = bcol_basesmuma_allreduce_init;
super->bcol_function_init_table[BCOL_REDUCE] = bcol_basesmuma_reduce_init;
super->bcol_function_init_table[BCOL_GATHER] = bcol_basesmuma_gather_init;
super->bcol_function_init_table[BCOL_ALLGATHER] = bcol_basesmuma_allgather_init;
super->bcol_function_init_table[BCOL_SYNC] = bcol_basesmuma_memsync_init;
/* memory management */
super->bcol_memory_init = bcol_basesmuma_bank_init_opti;
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
super->k_nomial_tree = bcol_basesmuma_setup_knomial_tree;
}
static int load_recursive_knomial_info(mca_bcol_basesmuma_module_t
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
*sm_module)
{
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
int rc = OMPI_SUCCESS;
rc = netpatterns_setup_recursive_knomial_tree_node(sm_module->super.sbgp_partner_module->group_size,
sm_module->super.sbgp_partner_module->my_index,
mca_bcol_basesmuma_component.k_nomial_radix,
&sm_module->knomial_exchange_tree);
return rc;
}
int bcol_basesmuma_setup_knomial_tree(mca_bcol_base_module_t *super)
{
mca_bcol_basesmuma_module_t *sm_module = (mca_bcol_basesmuma_module_t *) super;
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
return netpatterns_setup_recursive_knomial_allgather_tree_node(sm_module->super.sbgp_partner_module->group_size,
sm_module->super.sbgp_partner_module->my_index,
mca_bcol_basesmuma_component.k_nomial_radix,
super->list_n_connected,
&sm_module->knomial_allgather_tree);
}
/* query to see if the module is available for use on the given
* communicator, and if so, what it's priority is. This is where
* the backing shared-memory file is created.
*/
mca_bcol_base_module_t **
mca_bcol_basesmuma_comm_query(mca_sbgp_base_module_t *module, int *num_modules)
{
/* local variables */
mca_bcol_base_module_t **sm_modules = NULL;
mca_bcol_basesmuma_module_t *sm_module;
bcol_basesmuma_registration_data_t *sm_reg_data;
int ret, my_rank, name_length;
char *name;
int i;
int bcast_radix;
mca_bcol_basesmuma_component_t *cs = &mca_bcol_basesmuma_component;
/*mca_base_component_list_item_t *hdl_cli = NULL;*/
/*int hdl_num;*/
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/* at this point I think there is only a sinle shared
memory bcol that we need to be concerned with */
/* No group, no modules */
if (OPAL_UNLIKELY(NULL == module)) {
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
return NULL;
}
/* allocate and initialize an sm_bcol module */
sm_module = OBJ_NEW(mca_bcol_basesmuma_module_t);
/* set the subgroup */
sm_module->super.sbgp_partner_module=module;
(*num_modules)=1;
cs->super.n_net_contexts = *num_modules;
sm_modules = (mca_bcol_base_module_t **) malloc((cs->super.n_net_contexts)*
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
sizeof(mca_bcol_base_module_t *));
if( !sm_modules ) {
opal_output (ompi_bcol_base_framework.framework_output, "In base_bcol_masesmuma_setup_library_buffers failed to allocate memory for sm_modules\n");
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
return NULL;
}
sm_module->reduction_tree = NULL;
sm_module->fanout_read_tree = NULL;
ret=netpatterns_setup_recursive_doubling_tree_node(
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
module->group_size,module->my_index,
&(sm_module->recursive_doubling_tree));
if(OMPI_SUCCESS != ret) {
opal_output (ompi_bcol_base_framework.framework_output, "Error setting up recursive_doubling_tree \n");
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
return NULL;
}
/* setup the fanin tree - this is used only as part of a hierarchical
* barrier, so will set this up with rank 0 as the root */
my_rank=module->my_index;
ret=netpatterns_setup_narray_tree(cs->radix_fanin,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
my_rank,module->group_size,&(sm_module->fanin_node));
if(OMPI_SUCCESS != ret) {
opal_output (ompi_bcol_base_framework.framework_output, "Error setting up fanin tree \n");
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
return NULL;
}
/* setup the fanout tree - this is used only as part of a hierarchical
* barrier, so will set this up with rank 0 as the root */
ret=netpatterns_setup_narray_tree(cs->radix_fanout,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
my_rank,module->group_size,&(sm_module->fanout_node));
if(OMPI_SUCCESS != ret) {
opal_output (ompi_bcol_base_framework.framework_output, "Error setting up fanout tree \n");
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
return NULL;
}
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/*
* Setup the broadcast tree - this is used only as part of a hierarchical
* bcast, so will set this up with rank 0 as the root.
*/
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/* set the radix of the bcast tree */
bcast_radix = cs->radix_read_tree;
/* initialize fan-out read tree */
sm_module->fanout_read_tree=(netpatterns_tree_node_t*) malloc(
sizeof(netpatterns_tree_node_t)*module->group_size);
if( NULL == sm_module->fanout_read_tree ) {
goto Error;
}
for(i = 0; i < module->group_size; i++){
ret = netpatterns_setup_narray_tree(bcast_radix,
i, module->group_size, &(sm_module->fanout_read_tree[i]));
if(OMPI_SUCCESS != ret) {
goto Error;
}
}
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
ret = load_recursive_knomial_info(sm_module);
if (OMPI_SUCCESS != ret) {
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
BASESMUMA_VERBOSE(10, ("Failed to load recursive knomial tree"));
goto Error;
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
}
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/* Allocate offsets array for lmsg reduce */
ret = alloc_lmsg_reduce_offsets_array(sm_module);
if (OMPI_SUCCESS != ret) {
BASESMUMA_VERBOSE(10, ("Failed to allocate reduce offsets array"));
goto Error;
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
}
/* initialize reduction tree */
sm_module->reduction_tree=(netpatterns_tree_node_t *) malloc(
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
sizeof(netpatterns_tree_node_t )*module->group_size);
if( NULL == sm_module->reduction_tree ) {
goto Error;
}
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
ret=netpatterns_setup_multinomial_tree(
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
cs->order_reduction_tree,module->group_size,
sm_module->reduction_tree);
if( MPI_SUCCESS != ret ) {
goto Error;
}
/* get largest power of k for given group size */
sm_module->pow_k_levels = pow_sm_k(cs->k_nomial_radix,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
sm_module->super.sbgp_partner_module->group_size,
&(sm_module->pow_k));
/* get largest power of 2 for a given group size
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
* used in scatter allgather
*/
sm_module->pow_2_levels = pow_sm_k(2,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
sm_module->super.sbgp_partner_module->group_size,
&(sm_module->pow_2));
/*
* setup scatter data
*/
sm_module->scatter_kary_radix=cs->scatter_kary_radix;
sm_module->scatter_kary_tree=NULL;
ret=netpatterns_setup_narray_tree_contigous_ranks(
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
sm_module->scatter_kary_radix,
sm_module->super.sbgp_partner_module->group_size,
&(sm_module->scatter_kary_tree));
if(OMPI_SUCCESS != ret) {
opal_output (ompi_bcol_base_framework.framework_output, "In base_bcol_masesmuma_setup_library_buffers and scatter k-ary tree setup failed \n");
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
return NULL;
}
/* setup the module shared memory management */
ret=base_bcol_basesmuma_setup_library_buffers(sm_module, cs);
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
if(OMPI_SUCCESS != ret) {
opal_output (ompi_bcol_base_framework.framework_output, "In base_bcol_masesmuma_setup_library_buffers and mpool was not successfully setup!\n");
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
return NULL;
}
/* setup the collectives and memory management */
/* check to see whether or not the mpool has been inited */
/* allocate some space for the network contexts */
if(!cs->mpool_inited) {
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/* if it's empty, then fill it for first time */
cs->super.network_contexts = (bcol_base_network_context_t **)
malloc((cs->super.n_net_contexts)*
sizeof(bcol_base_network_context_t *));
/* you need to do some basic setup - define the file name,
* set data seg alignment and size of cntl structure in sm
* file.
*/
/* give the payload sm file a name */
name_length=asprintf(&name,
"%s"OPAL_PATH_SEP"0%s%0d",
ompi_process_info.job_session_dir,
cs->payload_base_fname,
(int)getpid());
if( 0 > name_length ) {
opal_output (ompi_bcol_base_framework.framework_output, "Failed to assign the shared memory payload file a name\n");
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
return NULL;
}
/* make sure name is not too long */
if ( OPAL_PATH_MAX < (name_length-1) ) {
opal_output (ompi_bcol_base_framework.framework_output, "Shared memory file name is too long!\n");
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
return NULL;
}
/* set the name and alignment characteristics */
sm_reg_data = (bcol_basesmuma_registration_data_t *) malloc(
sizeof(bcol_basesmuma_registration_data_t));
sm_reg_data->file_name = name;
sm_reg_data->data_seg_alignment = getpagesize();
sm_reg_data->size_ctl_structure = 0;
cs->super.network_contexts[0] = (bcol_base_network_context_t *)
malloc(sizeof(bcol_base_network_context_t));
cs->super.network_contexts[0]->context_data =
(void *) sm_reg_data;
cs->super.network_contexts[0]->
register_memory_fn = mca_bcol_basesmuma_register_sm;
cs->super.network_contexts[0]->
deregister_memory_fn = mca_bcol_basesmuma_deregister_sm;
sm_module->super.network_context = cs->super.network_contexts[0];
} else {
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
sm_module->super.network_context = cs->super.network_contexts[0];
}
/* Set the header size */
sm_module->super.header_size = sizeof(mca_bcol_basesmuma_header_t);
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/*initialize the hdl module if it's to be enabled*/
#if 0
if (module->use_hdl) {
sm_module->super.use_hdl = module->use_hdl;
hdl_cli = (mca_base_component_list_item_t *)
opal_list_get_first(&mca_hdl_base_components_in_use);
sm_module->hdl_module = ((mca_hdl_base_component_t*)
hdl_cli->cli_component)->hdl_comm_query(sm_module, &hdl_num);
if (1 != hdl_num || sm_module->hdl_module == NULL) {
ML_ERROR(("hdl modules are not successfully initialized!\n"));
goto Error;
}
} else {
sm_module->hdl_module = NULL;
}
#else
sm_module->hdl_module = NULL;
#endif
/* collective setup */
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
load_func(&(sm_module->super));
load_func_with_choices(&(sm_module->super));
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/*
* This initializes all collective algorithms
*/
ret = mca_bcol_base_bcol_fns_table_init(&(sm_module->super));
if (OMPI_SUCCESS != ret) {
goto Error;
}
sm_module->super.supported_mode = 0;
/* NTH: this is not set anywhere on the trunk as of 08/13/13 */
#if 0
if (module->use_hdl) {
sm_module->super.supported_mode = MCA_BCOL_BASE_ZERO_COPY;
}
#endif
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/* Initializes portals library required for basesmuma large message */
#ifdef __PORTALS_AVAIL__
/* Enable zero copy mode */
sm_module->super.supported_mode = MCA_BCOL_BASE_ZERO_COPY;
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
ret = mca_bcol_basesmuma_portals_init(cs);
if (OMPI_SUCCESS != ret) {
return NULL;
}
sm_module->sg_state.phase = INIT;
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
ret = PtlEQAlloc(((mca_bcol_basesmuma_portal_proc_info_t*)
cs->portals_info)->ni_h, MAX_PORTAL_EVENTS_IN_Q,
PTL_EQ_HANDLER_NONE, &sm_module->sg_state.read_eq);
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
if (ret != PTL_OK) {
BASESMUMA_VERBOSE(10,( "PtlEQAlloc() failed: %d",ret));
return NULL;
}
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
#endif
/* blocking recursive double barrier test */
/*
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
{
opal_output (ompi_bcol_base_framework.framework_output, "BBB About to hit the barrier test\n");
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
int rc;
bcol_function_args_t bogus;
rc = bcol_basesmuma_rd_barrier_init(&(sm_module->super));
rc = bcol_basesmuma_recursive_double_barrier(
&bogus, &(sm_module->super));
}
*/
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/* in this case we only expect a single network context.
in the future we should loop around this */
sm_modules[0] = &(sm_module->super);
return sm_modules;
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
Error:
/* cleanup */
if( sm_module->reduction_tree ) {
free(sm_module->reduction_tree);
sm_module->reduction_tree=NULL;
}
return NULL;
}
OBJ_CLASS_INSTANCE(mca_bcol_basesmuma_module_t,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
mca_bcol_base_module_t,
mca_bcol_basesmuma_module_construct,
mca_bcol_basesmuma_module_destruct);