ports/openmpi
ports/openmpi
1
1
Форкнуть 0
Код Релизы Активность
c8258c06e2
openmpi/ompi/attribute/attribute_predefined.c

276 строки
9.5 KiB
C
Исходник Обычный вид История

Some fixes for the attribute code: - move the attribute init section in ompi_mpi_init() down below where communicators are setup (we need MPI_COMM_WORLD to be setup before attributes and keyvals are setup) - removed confusing extra wrapper class around ompi_hash_table_t; looks like it was a victim of slow eroding of members so I put took it out back and put it out of its misery - added preliminary definitions for all the pre-defined keyvals. Still need more work here to assign their initial values, but I think Edgar was running into an atrribute problem and it may have been that the pre-defined attrs didn't yet exist. - removed some LAM-specific predefined keyvals from mpi.h This commit was SVN r2695.
2004-09-16 04:00:09 +04:00
/*
Update the copyright notices for IU and UTK. This commit was SVN r7999.
2005-11-05 22:57:48 +03:00
* Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
* University Research and Technology
* Corporation. All rights reserved.
* Copyright (c) 2004-2005 The University of Tennessee and The University
* of Tennessee Research Foundation. All rights
* reserved.
Hey, sports fans!! Guess what?? Here's the huge registry check-in you've all been waiting for with baited breath. The revised version sends a single message to all processes at the various stage gates, thus making the startup much more scalable. I could provide you with all the tawdry details, but won't for now - you are welcome to ask, though, and I'll merrily bore your ears to tears. In addition, the commit contains the following: 1. set the ignore properties on ompi/debuggers and orte/mca/pls/poe 2. Added simplified subscribe and put functions to the registry's API. I have also converted all of the ompi functions that registered subscriptions to the new API, and caught their associated put's as well. In a follow-on commit, I'll be adding support for George's hetero arch registry subscription (wanted to get this one in first). This commit was SVN r7118.
2005-09-01 05:07:30 +04:00
* Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
Add HLRS copyright This commit was SVN r3665.
2004-11-28 23:09:25 +03:00
* University of Stuttgart. All rights reserved.
Add UC copyright This commit was SVN r5009.
2005-03-24 15:43:37 +03:00
* Copyright (c) 2004-2005 The Regents of the University of California.
* All rights reserved.
Rewriting much of the errorcode and errorclass code, since - we have to be able to attach a string to an error class, not just to an error code - according to MPI-2 the attribute MPI_LASTUSEDCODE has to be updated everytime you add a new code or a new class. Thus, you have to have single list for both. Thus, we got rid of the error_class structure. In the error-code structure, we can distinguish whether we are dealing with an error code or an error class by looking at the err->code element of the structure. In case its value is MPI_UNDEFINED, the according entry is a class, else it is an error code. All predefined error codes have the code and the class field set to the same value. The test MPI_Add_error_class1 passes now. Fixes trac:418 This commit was SVN r12764. The following Trac tickets were found above: Ticket 418 --> https://svn.open-mpi.org/trac/ompi/ticket/418
2006-12-05 22:07:02 +03:00
* Copyright (c) 2006 University of Houston. All rights reserved.
Fixes trac:817 The C++ bindings were not tracking keyvals properly -- they were freeing some internal meta data when Free_keyval() was called, not when the keyval was actually destroyed (keyvals are refcounted in the C layer, just like all other MPI objects, because they can live for long after their corresponding Free call is invoked). This commit fixes this problem and several other things: * Add infrastructure on the ompi_attribute_keyval_t for an "extra" destructor pointer that will be invoked during the "real" constructor (i.e., when OBJ_RELEASE puts the refcount to 0). This allows calling back into the C++ layer to release meta data associated with the keyval. * Adjust all cases where keyvals are created to pass in relevant destructors (NULL or the C++ destructor). * Do essentially the same for MPI::Comm, MPI::Win, and MPI:Datatype: * Move several functions out of the .cc file into the _inln.h file since they no longer require locks * Make the 4 Create_keyval() functions call a common back-end keyval creation function that does the Right Thing depending on whether C or C++ function pointers were used for the keyval functions. The back-end function does not call the corresponding C MPI_*_create_keyval function, but rather does the work itself so that it can associate a "destructor" callback for the C++ bindings for when the keyval is actually destroyed. * Change a few type names to be more indicative of what they are (mostly dealing with keyvals [not "keys"]). * Add the 3 missing bindings for MPI::Comm::Create_keyval(). * Remove MPI::Comm::comm_map (and associated types) because it's no longer necessary in the intercepts -- it was a by-product of being a portable C++ bindings layer. Now we can just query the C layer directly to figure out what type a communicator is. This solves some logistics / callback issues, too. * Rename several types, variables, and fix many comments in the back-end C attribute implementation to make the names really reflect what they are (keyvals vs. attributes). The previous names heavily overloaded the name "key" and were ''extremely'' confusing. This commit was SVN r13565. The following Trac tickets were found above: Ticket 817 --> https://svn.open-mpi.org/trac/ompi/ticket/817
2007-02-09 02:50:04 +03:00
* Copyright (c) 2007 Cisco Systems, Inc. All rights reserved.
First cut at copyrights: IU, UTK, and some OSU. LANL and HLRS still pending. This commit was SVN r3655.
2004-11-22 04:38:40 +03:00
* $COPYRIGHT$
Hey, sports fans!! Guess what?? Here's the huge registry check-in you've all been waiting for with baited breath. The revised version sends a single message to all processes at the various stage gates, thus making the startup much more scalable. I could provide you with all the tawdry details, but won't for now - you are welcome to ask, though, and I'll merrily bore your ears to tears. In addition, the commit contains the following: 1. set the ignore properties on ompi/debuggers and orte/mca/pls/poe 2. Added simplified subscribe and put functions to the registry's API. I have also converted all of the ompi functions that registered subscriptions to the new API, and caught their associated put's as well. In a follow-on commit, I'll be adding support for George's hetero arch registry subscription (wanted to get this one in first). This commit was SVN r7118.
2005-09-01 05:07:30 +04:00
*
First cut at copyrights: IU, UTK, and some OSU. LANL and HLRS still pending. This commit was SVN r3655.
2004-11-22 04:38:40 +03:00
* Additional copyrights may follow
Hey, sports fans!! Guess what?? Here's the huge registry check-in you've all been waiting for with baited breath. The revised version sends a single message to all processes at the various stage gates, thus making the startup much more scalable. I could provide you with all the tawdry details, but won't for now - you are welcome to ask, though, and I'll merrily bore your ears to tears. In addition, the commit contains the following: 1. set the ignore properties on ompi/debuggers and orte/mca/pls/poe 2. Added simplified subscribe and put functions to the registry's API. I have also converted all of the ompi functions that registered subscriptions to the new API, and caught their associated put's as well. In a follow-on commit, I'll be adding support for George's hetero arch registry subscription (wanted to get this one in first). This commit was SVN r7118.
2005-09-01 05:07:30 +04:00
*
Some fixes for the attribute code: - move the attribute init section in ompi_mpi_init() down below where communicators are setup (we need MPI_COMM_WORLD to be setup before attributes and keyvals are setup) - removed confusing extra wrapper class around ompi_hash_table_t; looks like it was a victim of slow eroding of members so I put took it out back and put it out of its misery - added preliminary definitions for all the pre-defined keyvals. Still need more work here to assign their initial values, but I think Edgar was running into an atrribute problem and it may have been that the pre-defined attrs didn't yet exist. - removed some LAM-specific predefined keyvals from mpi.h This commit was SVN r2695.
2004-09-16 04:00:09 +04:00
* $HEADER$
*/
Submitted by: Jeff "I love MPI attributes" Squyres Reviewed by: Brian "MPI attributes ROCK" Barrett Bunches of changes to the attribute engine: - After many hours of discussion about MPI attributes, we came to the conclusion that MPI-2 Example 4.13 (the C->Fortran example) is just wrong. If you accept that, the rest of the text makes much more sense. - There are 9 inter-language cases: all combinations of (read, write) with C, Fortran MPI-1, and Fortran MPI-2 for each value. Each of the 9 cases have specific code for what is supposed to happen (and is labeled in the code with comments). There is a *lengthy* comment at the top of src/attribute/attribute.c that describes all of this. - All predefined attributes are now treated as if they were put from MPI-1 Fortran calls, with the exception of the window predefined attributes (which are irrelevant on the beta, because there is no one-sided support; preliminary fixes included in this patch, but will be fully addressed on the trunk) - MPI API calls (particularly the Fortran wrappers) are now fundamentally simpler -- they do *not* call the back-end MPI C API calls; instead, they call directly back into the attribute engine. - The MPI_LASTUSEDCODE attribute only exists on MPI_COMM_WORLD and is updated appropriately when user error classes are added. --> Note: Edgar made a suggestion that for communicator attributes, we ignore the communicator argument when retrieving attributes and simply return the value. This will likely only happen on the trunk, and will alleviate (from the user's perspective) the restriction that LASTUSEDCODE is only on MPI_COMM_WORLD. - The predefined attributes are now "better". We create keyvals separately than assigning values, and correctly distinguish between comm, type, and win attributes. Initial values are now set as if they were called from MPI-1 fortran. - Added a comment to the top of src/attribute/attribute_predefined.c explaining what each of the predefined attributes were and what OMPI sets them to be. This commit was SVN r6193.
2005-06-27 23:17:11 +04:00
/**
* @file
*
* Setup the predefined attributes in MPI.
*
* A number of pre-defined attributes are created here, most of which
* are exactly what one would expect, but there are a few exceptions
* -- so they're documented here.
*
* Predefined attributes are integer-valued or address-valued (per
* MPI-2; see section 4.12.7, keeping in mind that Example 4.13 is
* totally wrong -- see src/attribute/attribute.h for a lengthy
Hey, sports fans!! Guess what?? Here's the huge registry check-in you've all been waiting for with baited breath. The revised version sends a single message to all processes at the various stage gates, thus making the startup much more scalable. I could provide you with all the tawdry details, but won't for now - you are welcome to ask, though, and I'll merrily bore your ears to tears. In addition, the commit contains the following: 1. set the ignore properties on ompi/debuggers and orte/mca/pls/poe 2. Added simplified subscribe and put functions to the registry's API. I have also converted all of the ompi functions that registered subscriptions to the new API, and caught their associated put's as well. In a follow-on commit, I'll be adding support for George's hetero arch registry subscription (wanted to get this one in first). This commit was SVN r7118.
2005-09-01 05:07:30 +04:00
* explanation of this).
Submitted by: Jeff "I love MPI attributes" Squyres Reviewed by: Brian "MPI attributes ROCK" Barrett Bunches of changes to the attribute engine: - After many hours of discussion about MPI attributes, we came to the conclusion that MPI-2 Example 4.13 (the C->Fortran example) is just wrong. If you accept that, the rest of the text makes much more sense. - There are 9 inter-language cases: all combinations of (read, write) with C, Fortran MPI-1, and Fortran MPI-2 for each value. Each of the 9 cases have specific code for what is supposed to happen (and is labeled in the code with comments). There is a *lengthy* comment at the top of src/attribute/attribute.c that describes all of this. - All predefined attributes are now treated as if they were put from MPI-1 Fortran calls, with the exception of the window predefined attributes (which are irrelevant on the beta, because there is no one-sided support; preliminary fixes included in this patch, but will be fully addressed on the trunk) - MPI API calls (particularly the Fortran wrappers) are now fundamentally simpler -- they do *not* call the back-end MPI C API calls; instead, they call directly back into the attribute engine. - The MPI_LASTUSEDCODE attribute only exists on MPI_COMM_WORLD and is updated appropriately when user error classes are added. --> Note: Edgar made a suggestion that for communicator attributes, we ignore the communicator argument when retrieving attributes and simply return the value. This will likely only happen on the trunk, and will alleviate (from the user's perspective) the restriction that LASTUSEDCODE is only on MPI_COMM_WORLD. - The predefined attributes are now "better". We create keyvals separately than assigning values, and correctly distinguish between comm, type, and win attributes. Initial values are now set as if they were called from MPI-1 fortran. - Added a comment to the top of src/attribute/attribute_predefined.c explaining what each of the predefined attributes were and what OMPI sets them to be. This commit was SVN r6193.
2005-06-27 23:17:11 +04:00
*
* The only address-valued attribute is MPI_WIN_BASE. We treat it as
* if it were set from C. All other attributes are integer-valued.
* We treat them as if they were set from Fortran MPI-1 (i.e.,
* MPI_ATTR_PUT) or Fortran MPI-2 (i.e., MPI_xxx_ATTR_SET). Most
* attributes are MPI-1 integer-valued, meaning that they are the size
* of MPI_Fint (INTEGER). But MPI_WIN_SIZE and MPI_WIN_DISP_UNIT are
* MPI-2 integer-valued, meaning that they are the size of MPI_Aint
* (INTEGER(KIND=MPI_ADDRESS_KIND)).
*
* MPI_TAG_UB is set to a fixed upper limit.
*
* MPI_HOST is set to MPI_PROC_NULL (per MPI-1, see 7.1.1, p192).
*
Didn't have a good preset value for MPI_IO (see MPI-1, 7.1.1, p192). We may need to revisit this per whacky platforms like Red Storm, Blue Gene, etc. This commit was SVN r6245.
2005-07-01 01:29:22 +04:00
* MPI_IO is set to MPI_ANY_SOURCE. We may need to revist this.
Submitted by: Jeff "I love MPI attributes" Squyres Reviewed by: Brian "MPI attributes ROCK" Barrett Bunches of changes to the attribute engine: - After many hours of discussion about MPI attributes, we came to the conclusion that MPI-2 Example 4.13 (the C->Fortran example) is just wrong. If you accept that, the rest of the text makes much more sense. - There are 9 inter-language cases: all combinations of (read, write) with C, Fortran MPI-1, and Fortran MPI-2 for each value. Each of the 9 cases have specific code for what is supposed to happen (and is labeled in the code with comments). There is a *lengthy* comment at the top of src/attribute/attribute.c that describes all of this. - All predefined attributes are now treated as if they were put from MPI-1 Fortran calls, with the exception of the window predefined attributes (which are irrelevant on the beta, because there is no one-sided support; preliminary fixes included in this patch, but will be fully addressed on the trunk) - MPI API calls (particularly the Fortran wrappers) are now fundamentally simpler -- they do *not* call the back-end MPI C API calls; instead, they call directly back into the attribute engine. - The MPI_LASTUSEDCODE attribute only exists on MPI_COMM_WORLD and is updated appropriately when user error classes are added. --> Note: Edgar made a suggestion that for communicator attributes, we ignore the communicator argument when retrieving attributes and simply return the value. This will likely only happen on the trunk, and will alleviate (from the user's perspective) the restriction that LASTUSEDCODE is only on MPI_COMM_WORLD. - The predefined attributes are now "better". We create keyvals separately than assigning values, and correctly distinguish between comm, type, and win attributes. Initial values are now set as if they were called from MPI-1 fortran. - Added a comment to the top of src/attribute/attribute_predefined.c explaining what each of the predefined attributes were and what OMPI sets them to be. This commit was SVN r6193.
2005-06-27 23:17:11 +04:00
*
* MPI_WTIME_IS_GLOBAL is set to 0 (a conservative answer).
*
* MPI_APPNUM is set as the result of a GPR subscription.
*
* MPI_LASTUSEDCODE is set to an initial value and is reset every time
Rewriting much of the errorcode and errorclass code, since - we have to be able to attach a string to an error class, not just to an error code - according to MPI-2 the attribute MPI_LASTUSEDCODE has to be updated everytime you add a new code or a new class. Thus, you have to have single list for both. Thus, we got rid of the error_class structure. In the error-code structure, we can distinguish whether we are dealing with an error code or an error class by looking at the err->code element of the structure. In case its value is MPI_UNDEFINED, the according entry is a class, else it is an error code. All predefined error codes have the code and the class field set to the same value. The test MPI_Add_error_class1 passes now. Fixes trac:418 This commit was SVN r12764. The following Trac tickets were found above: Ticket 418 --> https://svn.open-mpi.org/trac/ompi/ticket/418
2006-12-05 22:07:02 +03:00
* MPI_ADD_ERROR_CLASS or MPI_ADD_ERROR_CODE is invoked.
* Its copy function is set to
Submitted by: Jeff "I love MPI attributes" Squyres Reviewed by: Brian "MPI attributes ROCK" Barrett Bunches of changes to the attribute engine: - After many hours of discussion about MPI attributes, we came to the conclusion that MPI-2 Example 4.13 (the C->Fortran example) is just wrong. If you accept that, the rest of the text makes much more sense. - There are 9 inter-language cases: all combinations of (read, write) with C, Fortran MPI-1, and Fortran MPI-2 for each value. Each of the 9 cases have specific code for what is supposed to happen (and is labeled in the code with comments). There is a *lengthy* comment at the top of src/attribute/attribute.c that describes all of this. - All predefined attributes are now treated as if they were put from MPI-1 Fortran calls, with the exception of the window predefined attributes (which are irrelevant on the beta, because there is no one-sided support; preliminary fixes included in this patch, but will be fully addressed on the trunk) - MPI API calls (particularly the Fortran wrappers) are now fundamentally simpler -- they do *not* call the back-end MPI C API calls; instead, they call directly back into the attribute engine. - The MPI_LASTUSEDCODE attribute only exists on MPI_COMM_WORLD and is updated appropriately when user error classes are added. --> Note: Edgar made a suggestion that for communicator attributes, we ignore the communicator argument when retrieving attributes and simply return the value. This will likely only happen on the trunk, and will alleviate (from the user's perspective) the restriction that LASTUSEDCODE is only on MPI_COMM_WORLD. - The predefined attributes are now "better". We create keyvals separately than assigning values, and correctly distinguish between comm, type, and win attributes. Initial values are now set as if they were called from MPI-1 fortran. - Added a comment to the top of src/attribute/attribute_predefined.c explaining what each of the predefined attributes were and what OMPI sets them to be. This commit was SVN r6193.
2005-06-27 23:17:11 +04:00
* MPI_COMM_NULL_COPY_FN, meaning that *only* MPI_COMM_WORLD will have
* this attribute value. As such, we only have to update
* MPI_COMM_WORLD when this value changes (i.e., since this is an
* integer-valued attribute, we have to update this attribute on every
* communicator -- using NULL_COPY_FN ensures that only MPI_COMM_WORLD
* has this attribute value set).
*
* MPI_UNIVERSE_SIZE is set as the result of a GPR subscription.
*
* MPI_WIN_BASE is an address-valued attribute, and is set directly
* from MPI_WIN_CREATE. MPI_WIN_SIZE and MPI_WIN_DISP_UNIT are both
* integer-valued attributes, *BUT* at least the MPI_WIN_SIZE is an
* MPI_Aint, so in terms of consistency, both should be the same --
* hence, we treat them as MPI-2 Fortran integer-valued attributes.
* All three of these atrributes have NULL_COPY_FN copy functions; it
* doesn't make sense to copy them to new windows (because they're
* values specific and unique to each window) -- especially when
* WIN_CREATE will explicitly set them on new windows anyway.
*
* These are not supported yet, but are included here for consistency:
*
* MPI_IMPI_CLIENT_SIZE, MPI_IMPI_CLIENT_COLOR, MPI_IMPI_HOST_SIZE,
* and MPI_IMPI_HOST_COLOR are integer-valued attributes.
*/
Some fixes for the attribute code: - move the attribute init section in ompi_mpi_init() down below where communicators are setup (we need MPI_COMM_WORLD to be setup before attributes and keyvals are setup) - removed confusing extra wrapper class around ompi_hash_table_t; looks like it was a victim of slow eroding of members so I put took it out back and put it out of its misery - added preliminary definitions for all the pre-defined keyvals. Still need more work here to assign their initial values, but I think Edgar was running into an atrribute problem and it may have been that the pre-defined attrs didn't yet exist. - removed some LAM-specific predefined keyvals from mpi.h This commit was SVN r2695.
2004-09-16 04:00:09 +04:00
#include "ompi_config.h"
The system headers are supposed to be protected by #ifdef and not by #if. This commit was SVN r21700.
2009-07-16 22:27:33 +04:00
#ifdef HAVE_STDLIB_H
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
#include <stdlib.h>
#endif
Some fixes for the attribute code: - move the attribute init section in ompi_mpi_init() down below where communicators are setup (we need MPI_COMM_WORLD to be setup before attributes and keyvals are setup) - removed confusing extra wrapper class around ompi_hash_table_t; looks like it was a victim of slow eroding of members so I put took it out back and put it out of its misery - added preliminary definitions for all the pre-defined keyvals. Still need more work here to assign their initial values, but I think Edgar was running into an atrribute problem and it may have been that the pre-defined attrs didn't yet exist. - removed some LAM-specific predefined keyvals from mpi.h This commit was SVN r2695.
2004-09-16 04:00:09 +04:00
#include "mpi.h"
* results from initial merge of the tim branch into the trunk. Compiles and ompi_info works, but that's all that has been tested. This commit was SVN r4827.
2005-03-14 23:57:21 +03:00
Next step in the project split, mainly source code re-arranging - move files out of toplevel include/ and etc/, moving it into the sub-projects - rather than including config headers with <project>/include, have them as <project> - require all headers to be included with a project prefix, with the exception of the config headers ({opal,orte,ompi}_config.h mpi.h, and mpif.h) This commit was SVN r8985.
2006-02-12 04:33:29 +03:00
#include "ompi/attribute/attribute.h"
* results from initial merge of the tim branch into the trunk. Compiles and ompi_info works, but that's all that has been tested. This commit was SVN r4827.
2005-03-14 23:57:21 +03:00
Rewriting much of the errorcode and errorclass code, since - we have to be able to attach a string to an error class, not just to an error code - according to MPI-2 the attribute MPI_LASTUSEDCODE has to be updated everytime you add a new code or a new class. Thus, you have to have single list for both. Thus, we got rid of the error_class structure. In the error-code structure, we can distinguish whether we are dealing with an error code or an error class by looking at the err->code element of the structure. In case its value is MPI_UNDEFINED, the according entry is a class, else it is an error code. All predefined error codes have the code and the class field set to the same value. The test MPI_Add_error_class1 passes now. Fixes trac:418 This commit was SVN r12764. The following Trac tickets were found above: Ticket 418 --> https://svn.open-mpi.org/trac/ompi/ticket/418
2006-12-05 22:07:02 +03:00
#include "ompi/errhandler/errcode.h"
remove hard coded constants for value of MPI_TAG_UB and the max CID and add the values to the PML structure. This will allow PMLs that want to do hardware matching at the cost of a smaller range of valid tags and cids. Updated all the places that used the MPI_TAG_UB_VALUE constant to instead look at the pml struct. This commit was SVN r6778.
2005-08-09 18:56:04 +04:00
#include "ompi/communicator/communicator.h"
#include "ompi/mca/pml/pml.h"
Some fixes for the attribute code: - move the attribute init section in ompi_mpi_init() down below where communicators are setup (we need MPI_COMM_WORLD to be setup before attributes and keyvals are setup) - removed confusing extra wrapper class around ompi_hash_table_t; looks like it was a victim of slow eroding of members so I put took it out back and put it out of its misery - added preliminary definitions for all the pre-defined keyvals. Still need more work here to assign their initial values, but I think Edgar was running into an atrribute problem and it may have been that the pre-defined attrs didn't yet exist. - removed some LAM-specific predefined keyvals from mpi.h This commit was SVN r2695.
2004-09-16 04:00:09 +04:00
/*
* Private functions
*/
Submitted by: Jeff "I love MPI attributes" Squyres Reviewed by: Brian "MPI attributes ROCK" Barrett Bunches of changes to the attribute engine: - After many hours of discussion about MPI attributes, we came to the conclusion that MPI-2 Example 4.13 (the C->Fortran example) is just wrong. If you accept that, the rest of the text makes much more sense. - There are 9 inter-language cases: all combinations of (read, write) with C, Fortran MPI-1, and Fortran MPI-2 for each value. Each of the 9 cases have specific code for what is supposed to happen (and is labeled in the code with comments). There is a *lengthy* comment at the top of src/attribute/attribute.c that describes all of this. - All predefined attributes are now treated as if they were put from MPI-1 Fortran calls, with the exception of the window predefined attributes (which are irrelevant on the beta, because there is no one-sided support; preliminary fixes included in this patch, but will be fully addressed on the trunk) - MPI API calls (particularly the Fortran wrappers) are now fundamentally simpler -- they do *not* call the back-end MPI C API calls; instead, they call directly back into the attribute engine. - The MPI_LASTUSEDCODE attribute only exists on MPI_COMM_WORLD and is updated appropriately when user error classes are added. --> Note: Edgar made a suggestion that for communicator attributes, we ignore the communicator argument when retrieving attributes and simply return the value. This will likely only happen on the trunk, and will alleviate (from the user's perspective) the restriction that LASTUSEDCODE is only on MPI_COMM_WORLD. - The predefined attributes are now "better". We create keyvals separately than assigning values, and correctly distinguish between comm, type, and win attributes. Initial values are now set as if they were called from MPI-1 fortran. - Added a comment to the top of src/attribute/attribute_predefined.c explaining what each of the predefined attributes were and what OMPI sets them to be. This commit was SVN r6193.
2005-06-27 23:17:11 +04:00
static int create_comm(int target_keyval, bool want_inherit);
- Upon Finalize, also release the memory of predefined attributes. This commit was SVN r9169.
2006-02-27 18:15:48 +03:00
static int free_comm(int keyval);
Submitted by: Jeff "I love MPI attributes" Squyres Reviewed by: Brian "MPI attributes ROCK" Barrett Bunches of changes to the attribute engine: - After many hours of discussion about MPI attributes, we came to the conclusion that MPI-2 Example 4.13 (the C->Fortran example) is just wrong. If you accept that, the rest of the text makes much more sense. - There are 9 inter-language cases: all combinations of (read, write) with C, Fortran MPI-1, and Fortran MPI-2 for each value. Each of the 9 cases have specific code for what is supposed to happen (and is labeled in the code with comments). There is a *lengthy* comment at the top of src/attribute/attribute.c that describes all of this. - All predefined attributes are now treated as if they were put from MPI-1 Fortran calls, with the exception of the window predefined attributes (which are irrelevant on the beta, because there is no one-sided support; preliminary fixes included in this patch, but will be fully addressed on the trunk) - MPI API calls (particularly the Fortran wrappers) are now fundamentally simpler -- they do *not* call the back-end MPI C API calls; instead, they call directly back into the attribute engine. - The MPI_LASTUSEDCODE attribute only exists on MPI_COMM_WORLD and is updated appropriately when user error classes are added. --> Note: Edgar made a suggestion that for communicator attributes, we ignore the communicator argument when retrieving attributes and simply return the value. This will likely only happen on the trunk, and will alleviate (from the user's perspective) the restriction that LASTUSEDCODE is only on MPI_COMM_WORLD. - The predefined attributes are now "better". We create keyvals separately than assigning values, and correctly distinguish between comm, type, and win attributes. Initial values are now set as if they were called from MPI-1 fortran. - Added a comment to the top of src/attribute/attribute_predefined.c explaining what each of the predefined attributes were and what OMPI sets them to be. This commit was SVN r6193.
2005-06-27 23:17:11 +04:00
static int create_win(int target_keyval);
- Upon Finalize, also release the memory of predefined attributes. This commit was SVN r9169.
2006-02-27 18:15:48 +03:00
static int free_win(int keyval);
Submitted by: Jeff "I love MPI attributes" Squyres Reviewed by: Brian "MPI attributes ROCK" Barrett Bunches of changes to the attribute engine: - After many hours of discussion about MPI attributes, we came to the conclusion that MPI-2 Example 4.13 (the C->Fortran example) is just wrong. If you accept that, the rest of the text makes much more sense. - There are 9 inter-language cases: all combinations of (read, write) with C, Fortran MPI-1, and Fortran MPI-2 for each value. Each of the 9 cases have specific code for what is supposed to happen (and is labeled in the code with comments). There is a *lengthy* comment at the top of src/attribute/attribute.c that describes all of this. - All predefined attributes are now treated as if they were put from MPI-1 Fortran calls, with the exception of the window predefined attributes (which are irrelevant on the beta, because there is no one-sided support; preliminary fixes included in this patch, but will be fully addressed on the trunk) - MPI API calls (particularly the Fortran wrappers) are now fundamentally simpler -- they do *not* call the back-end MPI C API calls; instead, they call directly back into the attribute engine. - The MPI_LASTUSEDCODE attribute only exists on MPI_COMM_WORLD and is updated appropriately when user error classes are added. --> Note: Edgar made a suggestion that for communicator attributes, we ignore the communicator argument when retrieving attributes and simply return the value. This will likely only happen on the trunk, and will alleviate (from the user's perspective) the restriction that LASTUSEDCODE is only on MPI_COMM_WORLD. - The predefined attributes are now "better". We create keyvals separately than assigning values, and correctly distinguish between comm, type, and win attributes. Initial values are now set as if they were called from MPI-1 fortran. - Added a comment to the top of src/attribute/attribute_predefined.c explaining what each of the predefined attributes were and what OMPI sets them to be. This commit was SVN r6193.
2005-06-27 23:17:11 +04:00
static int set_f(int keyval, MPI_Fint value);
Some fixes for the attribute code: - move the attribute init section in ompi_mpi_init() down below where communicators are setup (we need MPI_COMM_WORLD to be setup before attributes and keyvals are setup) - removed confusing extra wrapper class around ompi_hash_table_t; looks like it was a victim of slow eroding of members so I put took it out back and put it out of its misery - added preliminary definitions for all the pre-defined keyvals. Still need more work here to assign their initial values, but I think Edgar was running into an atrribute problem and it may have been that the pre-defined attrs didn't yet exist. - removed some LAM-specific predefined keyvals from mpi.h This commit was SVN r2695.
2004-09-16 04:00:09 +04:00
int ompi_attr_create_predefined(void)
The merged main trunk and gpr integration branch. Tested on Mac only so far - will check out and test on Linux. If that has a problem, will back all changes out (again), but I think we have this one correct. Will send out a more complete change notice once testing is complete. This commit was SVN r3644.
2004-11-20 22:12:43 +03:00
{
Make it so the universe size is passed through the ODLS instead of through a gpr trigger during MPI init. This matches what is currently being done with the app number. The default odls has been updated and works fine. The process odls has been updated, but I could not verify its operation. The bproc ODLS has not been updated yet. Ralph will look at it soon. This commit was SVN r15257.
2007-07-02 05:33:35 +04:00
int ret;
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
char *univ_size;
int usize;
Hey, sports fans!! Guess what?? Here's the huge registry check-in you've all been waiting for with baited breath. The revised version sends a single message to all processes at the various stage gates, thus making the startup much more scalable. I could provide you with all the tawdry details, but won't for now - you are welcome to ask, though, and I'll merrily bore your ears to tears. In addition, the commit contains the following: 1. set the ignore properties on ompi/debuggers and orte/mca/pls/poe 2. Added simplified subscribe and put functions to the registry's API. I have also converted all of the ompi functions that registered subscriptions to the new API, and caught their associated put's as well. In a follow-on commit, I'll be adding support for George's hetero arch registry subscription (wanted to get this one in first). This commit was SVN r7118.
2005-09-01 05:07:30 +04:00
Submitted by: Jeff "I love MPI attributes" Squyres Reviewed by: Brian "MPI attributes ROCK" Barrett Bunches of changes to the attribute engine: - After many hours of discussion about MPI attributes, we came to the conclusion that MPI-2 Example 4.13 (the C->Fortran example) is just wrong. If you accept that, the rest of the text makes much more sense. - There are 9 inter-language cases: all combinations of (read, write) with C, Fortran MPI-1, and Fortran MPI-2 for each value. Each of the 9 cases have specific code for what is supposed to happen (and is labeled in the code with comments). There is a *lengthy* comment at the top of src/attribute/attribute.c that describes all of this. - All predefined attributes are now treated as if they were put from MPI-1 Fortran calls, with the exception of the window predefined attributes (which are irrelevant on the beta, because there is no one-sided support; preliminary fixes included in this patch, but will be fully addressed on the trunk) - MPI API calls (particularly the Fortran wrappers) are now fundamentally simpler -- they do *not* call the back-end MPI C API calls; instead, they call directly back into the attribute engine. - The MPI_LASTUSEDCODE attribute only exists on MPI_COMM_WORLD and is updated appropriately when user error classes are added. --> Note: Edgar made a suggestion that for communicator attributes, we ignore the communicator argument when retrieving attributes and simply return the value. This will likely only happen on the trunk, and will alleviate (from the user's perspective) the restriction that LASTUSEDCODE is only on MPI_COMM_WORLD. - The predefined attributes are now "better". We create keyvals separately than assigning values, and correctly distinguish between comm, type, and win attributes. Initial values are now set as if they were called from MPI-1 fortran. - Added a comment to the top of src/attribute/attribute_predefined.c explaining what each of the predefined attributes were and what OMPI sets them to be. This commit was SVN r6193.
2005-06-27 23:17:11 +04:00
/* Create all the keyvals */
/* DO NOT CHANGE THE ORDER OF CREATING THESE KEYVALS! This order
strictly adheres to the order in mpi.h. If you change the
order here, you must change the order in mpi.h as well! */
Hey, sports fans!! Guess what?? Here's the huge registry check-in you've all been waiting for with baited breath. The revised version sends a single message to all processes at the various stage gates, thus making the startup much more scalable. I could provide you with all the tawdry details, but won't for now - you are welcome to ask, though, and I'll merrily bore your ears to tears. In addition, the commit contains the following: 1. set the ignore properties on ompi/debuggers and orte/mca/pls/poe 2. Added simplified subscribe and put functions to the registry's API. I have also converted all of the ompi functions that registered subscriptions to the new API, and caught their associated put's as well. In a follow-on commit, I'll be adding support for George's hetero arch registry subscription (wanted to get this one in first). This commit was SVN r7118.
2005-09-01 05:07:30 +04:00
Submitted by: Jeff "I love MPI attributes" Squyres Reviewed by: Brian "MPI attributes ROCK" Barrett Bunches of changes to the attribute engine: - After many hours of discussion about MPI attributes, we came to the conclusion that MPI-2 Example 4.13 (the C->Fortran example) is just wrong. If you accept that, the rest of the text makes much more sense. - There are 9 inter-language cases: all combinations of (read, write) with C, Fortran MPI-1, and Fortran MPI-2 for each value. Each of the 9 cases have specific code for what is supposed to happen (and is labeled in the code with comments). There is a *lengthy* comment at the top of src/attribute/attribute.c that describes all of this. - All predefined attributes are now treated as if they were put from MPI-1 Fortran calls, with the exception of the window predefined attributes (which are irrelevant on the beta, because there is no one-sided support; preliminary fixes included in this patch, but will be fully addressed on the trunk) - MPI API calls (particularly the Fortran wrappers) are now fundamentally simpler -- they do *not* call the back-end MPI C API calls; instead, they call directly back into the attribute engine. - The MPI_LASTUSEDCODE attribute only exists on MPI_COMM_WORLD and is updated appropriately when user error classes are added. --> Note: Edgar made a suggestion that for communicator attributes, we ignore the communicator argument when retrieving attributes and simply return the value. This will likely only happen on the trunk, and will alleviate (from the user's perspective) the restriction that LASTUSEDCODE is only on MPI_COMM_WORLD. - The predefined attributes are now "better". We create keyvals separately than assigning values, and correctly distinguish between comm, type, and win attributes. Initial values are now set as if they were called from MPI-1 fortran. - Added a comment to the top of src/attribute/attribute_predefined.c explaining what each of the predefined attributes were and what OMPI sets them to be. This commit was SVN r6193.
2005-06-27 23:17:11 +04:00
if (OMPI_SUCCESS != (ret = create_comm(MPI_TAG_UB, true)) ||
OMPI_SUCCESS != (ret = create_comm(MPI_HOST, true)) ||
OMPI_SUCCESS != (ret = create_comm(MPI_IO, true)) ||
OMPI_SUCCESS != (ret = create_comm(MPI_WTIME_IS_GLOBAL, true)) ||
OMPI_SUCCESS != (ret = create_comm(MPI_APPNUM, true)) ||
OMPI_SUCCESS != (ret = create_comm(MPI_LASTUSEDCODE, false)) ||
OMPI_SUCCESS != (ret = create_comm(MPI_UNIVERSE_SIZE, true)) ||
OMPI_SUCCESS != (ret = create_win(MPI_WIN_BASE)) ||
OMPI_SUCCESS != (ret = create_win(MPI_WIN_SIZE)) ||
OMPI_SUCCESS != (ret = create_win(MPI_WIN_DISP_UNIT)) ||
#if 0
/* JMS For when we implement IMPI */
- Upon Finalize, also release the memory of predefined attributes. This commit was SVN r9169.
2006-02-27 18:15:48 +03:00
OMPI_SUCCESS != (ret = create_comm(IMPI_CLIENT_SIZE, true)) ||
OMPI_SUCCESS != (ret = create_comm(IMPI_CLIENT_COLOR, true)) ||
OMPI_SUCCESS != (ret = create_comm(IMPI_HOST_SIZE, true)) ||
OMPI_SUCCESS != (ret = create_comm(IMPI_HOST_COLOR, true)) ||
Submitted by: Jeff "I love MPI attributes" Squyres Reviewed by: Brian "MPI attributes ROCK" Barrett Bunches of changes to the attribute engine: - After many hours of discussion about MPI attributes, we came to the conclusion that MPI-2 Example 4.13 (the C->Fortran example) is just wrong. If you accept that, the rest of the text makes much more sense. - There are 9 inter-language cases: all combinations of (read, write) with C, Fortran MPI-1, and Fortran MPI-2 for each value. Each of the 9 cases have specific code for what is supposed to happen (and is labeled in the code with comments). There is a *lengthy* comment at the top of src/attribute/attribute.c that describes all of this. - All predefined attributes are now treated as if they were put from MPI-1 Fortran calls, with the exception of the window predefined attributes (which are irrelevant on the beta, because there is no one-sided support; preliminary fixes included in this patch, but will be fully addressed on the trunk) - MPI API calls (particularly the Fortran wrappers) are now fundamentally simpler -- they do *not* call the back-end MPI C API calls; instead, they call directly back into the attribute engine. - The MPI_LASTUSEDCODE attribute only exists on MPI_COMM_WORLD and is updated appropriately when user error classes are added. --> Note: Edgar made a suggestion that for communicator attributes, we ignore the communicator argument when retrieving attributes and simply return the value. This will likely only happen on the trunk, and will alleviate (from the user's perspective) the restriction that LASTUSEDCODE is only on MPI_COMM_WORLD. - The predefined attributes are now "better". We create keyvals separately than assigning values, and correctly distinguish between comm, type, and win attributes. Initial values are now set as if they were called from MPI-1 fortran. - Added a comment to the top of src/attribute/attribute_predefined.c explaining what each of the predefined attributes were and what OMPI sets them to be. This commit was SVN r6193.
2005-06-27 23:17:11 +04:00
#endif
0) {
return ret;
}
Make it so the universe size is passed through the ODLS instead of through a gpr trigger during MPI init. This matches what is currently being done with the app number. The default odls has been updated and works fine. The process odls has been updated, but I could not verify its operation. The bproc ODLS has not been updated yet. Ralph will look at it soon. This commit was SVN r15257.
2007-07-02 05:33:35 +04:00
/* Set default values for everything except MPI_UNIVERSE_SIZE */
Submitted by: Jeff "I love MPI attributes" Squyres Reviewed by: Brian "MPI attributes ROCK" Barrett Bunches of changes to the attribute engine: - After many hours of discussion about MPI attributes, we came to the conclusion that MPI-2 Example 4.13 (the C->Fortran example) is just wrong. If you accept that, the rest of the text makes much more sense. - There are 9 inter-language cases: all combinations of (read, write) with C, Fortran MPI-1, and Fortran MPI-2 for each value. Each of the 9 cases have specific code for what is supposed to happen (and is labeled in the code with comments). There is a *lengthy* comment at the top of src/attribute/attribute.c that describes all of this. - All predefined attributes are now treated as if they were put from MPI-1 Fortran calls, with the exception of the window predefined attributes (which are irrelevant on the beta, because there is no one-sided support; preliminary fixes included in this patch, but will be fully addressed on the trunk) - MPI API calls (particularly the Fortran wrappers) are now fundamentally simpler -- they do *not* call the back-end MPI C API calls; instead, they call directly back into the attribute engine. - The MPI_LASTUSEDCODE attribute only exists on MPI_COMM_WORLD and is updated appropriately when user error classes are added. --> Note: Edgar made a suggestion that for communicator attributes, we ignore the communicator argument when retrieving attributes and simply return the value. This will likely only happen on the trunk, and will alleviate (from the user's perspective) the restriction that LASTUSEDCODE is only on MPI_COMM_WORLD. - The predefined attributes are now "better". We create keyvals separately than assigning values, and correctly distinguish between comm, type, and win attributes. Initial values are now set as if they were called from MPI-1 fortran. - Added a comment to the top of src/attribute/attribute_predefined.c explaining what each of the predefined attributes were and what OMPI sets them to be. This commit was SVN r6193.
2005-06-27 23:17:11 +04:00
* update ob1 to direct call * don't know what I was thinking, but can't use the MCA_PML_CALL macro on the two data values, as they don't have things that the macro can expand into This commit was SVN r6868.
2005-08-14 07:14:20 +04:00
if (OMPI_SUCCESS != (ret = set_f(MPI_TAG_UB, mca_pml.pml_max_tag)) ||
Submitted by: Jeff "I love MPI attributes" Squyres Reviewed by: Brian "MPI attributes ROCK" Barrett Bunches of changes to the attribute engine: - After many hours of discussion about MPI attributes, we came to the conclusion that MPI-2 Example 4.13 (the C->Fortran example) is just wrong. If you accept that, the rest of the text makes much more sense. - There are 9 inter-language cases: all combinations of (read, write) with C, Fortran MPI-1, and Fortran MPI-2 for each value. Each of the 9 cases have specific code for what is supposed to happen (and is labeled in the code with comments). There is a *lengthy* comment at the top of src/attribute/attribute.c that describes all of this. - All predefined attributes are now treated as if they were put from MPI-1 Fortran calls, with the exception of the window predefined attributes (which are irrelevant on the beta, because there is no one-sided support; preliminary fixes included in this patch, but will be fully addressed on the trunk) - MPI API calls (particularly the Fortran wrappers) are now fundamentally simpler -- they do *not* call the back-end MPI C API calls; instead, they call directly back into the attribute engine. - The MPI_LASTUSEDCODE attribute only exists on MPI_COMM_WORLD and is updated appropriately when user error classes are added. --> Note: Edgar made a suggestion that for communicator attributes, we ignore the communicator argument when retrieving attributes and simply return the value. This will likely only happen on the trunk, and will alleviate (from the user's perspective) the restriction that LASTUSEDCODE is only on MPI_COMM_WORLD. - The predefined attributes are now "better". We create keyvals separately than assigning values, and correctly distinguish between comm, type, and win attributes. Initial values are now set as if they were called from MPI-1 fortran. - Added a comment to the top of src/attribute/attribute_predefined.c explaining what each of the predefined attributes were and what OMPI sets them to be. This commit was SVN r6193.
2005-06-27 23:17:11 +04:00
OMPI_SUCCESS != (ret = set_f(MPI_HOST, MPI_PROC_NULL)) ||
Didn't have a good preset value for MPI_IO (see MPI-1, 7.1.1, p192). We may need to revisit this per whacky platforms like Red Storm, Blue Gene, etc. This commit was SVN r6245.
2005-07-01 01:29:22 +04:00
OMPI_SUCCESS != (ret = set_f(MPI_IO, MPI_ANY_SOURCE)) ||
Submitted by: Jeff "I love MPI attributes" Squyres Reviewed by: Brian "MPI attributes ROCK" Barrett Bunches of changes to the attribute engine: - After many hours of discussion about MPI attributes, we came to the conclusion that MPI-2 Example 4.13 (the C->Fortran example) is just wrong. If you accept that, the rest of the text makes much more sense. - There are 9 inter-language cases: all combinations of (read, write) with C, Fortran MPI-1, and Fortran MPI-2 for each value. Each of the 9 cases have specific code for what is supposed to happen (and is labeled in the code with comments). There is a *lengthy* comment at the top of src/attribute/attribute.c that describes all of this. - All predefined attributes are now treated as if they were put from MPI-1 Fortran calls, with the exception of the window predefined attributes (which are irrelevant on the beta, because there is no one-sided support; preliminary fixes included in this patch, but will be fully addressed on the trunk) - MPI API calls (particularly the Fortran wrappers) are now fundamentally simpler -- they do *not* call the back-end MPI C API calls; instead, they call directly back into the attribute engine. - The MPI_LASTUSEDCODE attribute only exists on MPI_COMM_WORLD and is updated appropriately when user error classes are added. --> Note: Edgar made a suggestion that for communicator attributes, we ignore the communicator argument when retrieving attributes and simply return the value. This will likely only happen on the trunk, and will alleviate (from the user's perspective) the restriction that LASTUSEDCODE is only on MPI_COMM_WORLD. - The predefined attributes are now "better". We create keyvals separately than assigning values, and correctly distinguish between comm, type, and win attributes. Initial values are now set as if they were called from MPI-1 fortran. - Added a comment to the top of src/attribute/attribute_predefined.c explaining what each of the predefined attributes were and what OMPI sets them to be. This commit was SVN r6193.
2005-06-27 23:17:11 +04:00
OMPI_SUCCESS != (ret = set_f(MPI_WTIME_IS_GLOBAL, 0)) ||
Hey, sports fans!! Guess what?? Here's the huge registry check-in you've all been waiting for with baited breath. The revised version sends a single message to all processes at the various stage gates, thus making the startup much more scalable. I could provide you with all the tawdry details, but won't for now - you are welcome to ask, though, and I'll merrily bore your ears to tears. In addition, the commit contains the following: 1. set the ignore properties on ompi/debuggers and orte/mca/pls/poe 2. Added simplified subscribe and put functions to the registry's API. I have also converted all of the ompi functions that registered subscriptions to the new API, and caught their associated put's as well. In a follow-on commit, I'll be adding support for George's hetero arch registry subscription (wanted to get this one in first). This commit was SVN r7118.
2005-09-01 05:07:30 +04:00
OMPI_SUCCESS != (ret = set_f(MPI_LASTUSEDCODE,
Rewriting much of the errorcode and errorclass code, since - we have to be able to attach a string to an error class, not just to an error code - according to MPI-2 the attribute MPI_LASTUSEDCODE has to be updated everytime you add a new code or a new class. Thus, you have to have single list for both. Thus, we got rid of the error_class structure. In the error-code structure, we can distinguish whether we are dealing with an error code or an error class by looking at the err->code element of the structure. In case its value is MPI_UNDEFINED, the according entry is a class, else it is an error code. All predefined error codes have the code and the class field set to the same value. The test MPI_Add_error_class1 passes now. Fixes trac:418 This commit was SVN r12764. The following Trac tickets were found above: Ticket 418 --> https://svn.open-mpi.org/trac/ompi/ticket/418
2006-12-05 22:07:02 +03:00
ompi_mpi_errcode_lastused)) ||
Submitted by: Jeff "I love MPI attributes" Squyres Reviewed by: Brian "MPI attributes ROCK" Barrett Bunches of changes to the attribute engine: - After many hours of discussion about MPI attributes, we came to the conclusion that MPI-2 Example 4.13 (the C->Fortran example) is just wrong. If you accept that, the rest of the text makes much more sense. - There are 9 inter-language cases: all combinations of (read, write) with C, Fortran MPI-1, and Fortran MPI-2 for each value. Each of the 9 cases have specific code for what is supposed to happen (and is labeled in the code with comments). There is a *lengthy* comment at the top of src/attribute/attribute.c that describes all of this. - All predefined attributes are now treated as if they were put from MPI-1 Fortran calls, with the exception of the window predefined attributes (which are irrelevant on the beta, because there is no one-sided support; preliminary fixes included in this patch, but will be fully addressed on the trunk) - MPI API calls (particularly the Fortran wrappers) are now fundamentally simpler -- they do *not* call the back-end MPI C API calls; instead, they call directly back into the attribute engine. - The MPI_LASTUSEDCODE attribute only exists on MPI_COMM_WORLD and is updated appropriately when user error classes are added. --> Note: Edgar made a suggestion that for communicator attributes, we ignore the communicator argument when retrieving attributes and simply return the value. This will likely only happen on the trunk, and will alleviate (from the user's perspective) the restriction that LASTUSEDCODE is only on MPI_COMM_WORLD. - The predefined attributes are now "better". We create keyvals separately than assigning values, and correctly distinguish between comm, type, and win attributes. Initial values are now set as if they were called from MPI-1 fortran. - Added a comment to the top of src/attribute/attribute_predefined.c explaining what each of the predefined attributes were and what OMPI sets them to be. This commit was SVN r6193.
2005-06-27 23:17:11 +04:00
#if 0
/* JMS For when we implement IMPI */
- Upon Finalize, also release the memory of predefined attributes. This commit was SVN r9169.
2006-02-27 18:15:48 +03:00
OMPI_SUCCESS != (ret = set(IMPI_CLIENT_SIZE,
Submitted by: Jeff "I love MPI attributes" Squyres Reviewed by: Brian "MPI attributes ROCK" Barrett Bunches of changes to the attribute engine: - After many hours of discussion about MPI attributes, we came to the conclusion that MPI-2 Example 4.13 (the C->Fortran example) is just wrong. If you accept that, the rest of the text makes much more sense. - There are 9 inter-language cases: all combinations of (read, write) with C, Fortran MPI-1, and Fortran MPI-2 for each value. Each of the 9 cases have specific code for what is supposed to happen (and is labeled in the code with comments). There is a *lengthy* comment at the top of src/attribute/attribute.c that describes all of this. - All predefined attributes are now treated as if they were put from MPI-1 Fortran calls, with the exception of the window predefined attributes (which are irrelevant on the beta, because there is no one-sided support; preliminary fixes included in this patch, but will be fully addressed on the trunk) - MPI API calls (particularly the Fortran wrappers) are now fundamentally simpler -- they do *not* call the back-end MPI C API calls; instead, they call directly back into the attribute engine. - The MPI_LASTUSEDCODE attribute only exists on MPI_COMM_WORLD and is updated appropriately when user error classes are added. --> Note: Edgar made a suggestion that for communicator attributes, we ignore the communicator argument when retrieving attributes and simply return the value. This will likely only happen on the trunk, and will alleviate (from the user's perspective) the restriction that LASTUSEDCODE is only on MPI_COMM_WORLD. - The predefined attributes are now "better". We create keyvals separately than assigning values, and correctly distinguish between comm, type, and win attributes. Initial values are now set as if they were called from MPI-1 fortran. - Added a comment to the top of src/attribute/attribute_predefined.c explaining what each of the predefined attributes were and what OMPI sets them to be. This commit was SVN r6193.
2005-06-27 23:17:11 +04:00
&attr_impi_client_size)) ||
- Upon Finalize, also release the memory of predefined attributes. This commit was SVN r9169.
2006-02-27 18:15:48 +03:00
OMPI_SUCCESS != (ret = set(IMPI_CLIENT_COLOR,
Submitted by: Jeff "I love MPI attributes" Squyres Reviewed by: Brian "MPI attributes ROCK" Barrett Bunches of changes to the attribute engine: - After many hours of discussion about MPI attributes, we came to the conclusion that MPI-2 Example 4.13 (the C->Fortran example) is just wrong. If you accept that, the rest of the text makes much more sense. - There are 9 inter-language cases: all combinations of (read, write) with C, Fortran MPI-1, and Fortran MPI-2 for each value. Each of the 9 cases have specific code for what is supposed to happen (and is labeled in the code with comments). There is a *lengthy* comment at the top of src/attribute/attribute.c that describes all of this. - All predefined attributes are now treated as if they were put from MPI-1 Fortran calls, with the exception of the window predefined attributes (which are irrelevant on the beta, because there is no one-sided support; preliminary fixes included in this patch, but will be fully addressed on the trunk) - MPI API calls (particularly the Fortran wrappers) are now fundamentally simpler -- they do *not* call the back-end MPI C API calls; instead, they call directly back into the attribute engine. - The MPI_LASTUSEDCODE attribute only exists on MPI_COMM_WORLD and is updated appropriately when user error classes are added. --> Note: Edgar made a suggestion that for communicator attributes, we ignore the communicator argument when retrieving attributes and simply return the value. This will likely only happen on the trunk, and will alleviate (from the user's perspective) the restriction that LASTUSEDCODE is only on MPI_COMM_WORLD. - The predefined attributes are now "better". We create keyvals separately than assigning values, and correctly distinguish between comm, type, and win attributes. Initial values are now set as if they were called from MPI-1 fortran. - Added a comment to the top of src/attribute/attribute_predefined.c explaining what each of the predefined attributes were and what OMPI sets them to be. This commit was SVN r6193.
2005-06-27 23:17:11 +04:00
&attr_impi_client_color)) ||
- Upon Finalize, also release the memory of predefined attributes. This commit was SVN r9169.
2006-02-27 18:15:48 +03:00
OMPI_SUCCESS != (ret = set(IMPI_HOST_SIZE,
Submitted by: Jeff "I love MPI attributes" Squyres Reviewed by: Brian "MPI attributes ROCK" Barrett Bunches of changes to the attribute engine: - After many hours of discussion about MPI attributes, we came to the conclusion that MPI-2 Example 4.13 (the C->Fortran example) is just wrong. If you accept that, the rest of the text makes much more sense. - There are 9 inter-language cases: all combinations of (read, write) with C, Fortran MPI-1, and Fortran MPI-2 for each value. Each of the 9 cases have specific code for what is supposed to happen (and is labeled in the code with comments). There is a *lengthy* comment at the top of src/attribute/attribute.c that describes all of this. - All predefined attributes are now treated as if they were put from MPI-1 Fortran calls, with the exception of the window predefined attributes (which are irrelevant on the beta, because there is no one-sided support; preliminary fixes included in this patch, but will be fully addressed on the trunk) - MPI API calls (particularly the Fortran wrappers) are now fundamentally simpler -- they do *not* call the back-end MPI C API calls; instead, they call directly back into the attribute engine. - The MPI_LASTUSEDCODE attribute only exists on MPI_COMM_WORLD and is updated appropriately when user error classes are added. --> Note: Edgar made a suggestion that for communicator attributes, we ignore the communicator argument when retrieving attributes and simply return the value. This will likely only happen on the trunk, and will alleviate (from the user's perspective) the restriction that LASTUSEDCODE is only on MPI_COMM_WORLD. - The predefined attributes are now "better". We create keyvals separately than assigning values, and correctly distinguish between comm, type, and win attributes. Initial values are now set as if they were called from MPI-1 fortran. - Added a comment to the top of src/attribute/attribute_predefined.c explaining what each of the predefined attributes were and what OMPI sets them to be. This commit was SVN r6193.
2005-06-27 23:17:11 +04:00
&attr_impi_host_size)) ||
- Upon Finalize, also release the memory of predefined attributes. This commit was SVN r9169.
2006-02-27 18:15:48 +03:00
OMPI_SUCCESS != (ret = set(IMPI_HOST_COLOR,
Submitted by: Jeff "I love MPI attributes" Squyres Reviewed by: Brian "MPI attributes ROCK" Barrett Bunches of changes to the attribute engine: - After many hours of discussion about MPI attributes, we came to the conclusion that MPI-2 Example 4.13 (the C->Fortran example) is just wrong. If you accept that, the rest of the text makes much more sense. - There are 9 inter-language cases: all combinations of (read, write) with C, Fortran MPI-1, and Fortran MPI-2 for each value. Each of the 9 cases have specific code for what is supposed to happen (and is labeled in the code with comments). There is a *lengthy* comment at the top of src/attribute/attribute.c that describes all of this. - All predefined attributes are now treated as if they were put from MPI-1 Fortran calls, with the exception of the window predefined attributes (which are irrelevant on the beta, because there is no one-sided support; preliminary fixes included in this patch, but will be fully addressed on the trunk) - MPI API calls (particularly the Fortran wrappers) are now fundamentally simpler -- they do *not* call the back-end MPI C API calls; instead, they call directly back into the attribute engine. - The MPI_LASTUSEDCODE attribute only exists on MPI_COMM_WORLD and is updated appropriately when user error classes are added. --> Note: Edgar made a suggestion that for communicator attributes, we ignore the communicator argument when retrieving attributes and simply return the value. This will likely only happen on the trunk, and will alleviate (from the user's perspective) the restriction that LASTUSEDCODE is only on MPI_COMM_WORLD. - The predefined attributes are now "better". We create keyvals separately than assigning values, and correctly distinguish between comm, type, and win attributes. Initial values are now set as if they were called from MPI-1 fortran. - Added a comment to the top of src/attribute/attribute_predefined.c explaining what each of the predefined attributes were and what OMPI sets them to be. This commit was SVN r6193.
2005-06-27 23:17:11 +04:00
&attr_impi_host_color)) ||
#endif
0) {
return ret;
}
Make it so the universe size is passed through the ODLS instead of through a gpr trigger during MPI init. This matches what is currently being done with the app number. The default odls has been updated and works fine. The process odls has been updated, but I could not verify its operation. The bproc ODLS has not been updated yet. Ralph will look at it soon. This commit was SVN r15257.
2007-07-02 05:33:35 +04:00
/* If the universe size is set, then use it. Otherwise default
* to the size of MPI_COMM_WORLD */
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
univ_size = getenv("OMPI_UNIVERSE_SIZE");
if (NULL == univ_size || (usize = strtol(univ_size, NULL, 0)) <= 0) {
Make it so the universe size is passed through the ODLS instead of through a gpr trigger during MPI init. This matches what is currently being done with the app number. The default odls has been updated and works fine. The process odls has been updated, but I could not verify its operation. The bproc ODLS has not been updated yet. Ralph will look at it soon. This commit was SVN r15257.
2007-07-02 05:33:35 +04:00
ret = set_f(MPI_UNIVERSE_SIZE, ompi_comm_size(MPI_COMM_WORLD));
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
} else {
ret = set_f(MPI_UNIVERSE_SIZE, usize);
Fix ticket #545 Setup subscriptions to correctly return the MPI_APPNUM attribute. Fix an unreported bug that was found. The universe size was incorrectly defined in the attributes code. As coded, it looked for size_t values and based its size computation on those numbers. Unfortunately, the node_slots value had been changed to an orte_std_cntr_t awhile back! So the universe size was never updated. Update the hello_nodename test to check for MPI_APPNUM. Add a definition to ns_types for ORTE_PROC_MY_NAME - just a shortcut for orte_process_info.my_name. Brought over from ORTE 2.0 as it will be used extensively there. This commit was SVN r12377.
2006-11-01 00:29:07 +03:00
}
Commit Ralph's fix for MPI_APPNUM. This commit was SVN r16371.
2007-10-06 22:54:43 +04:00
if (OMPI_SUCCESS != ret) {
return ret;
}
- Since r22727 orte_app_idx_t was introduced, being a uint32_t (was previously an orte_std_cntr_t, which is int32_t). Comparison with < 0 don't make any sense, here. This commit was SVN r22799. The following SVN revision numbers were found above: r22727 --> open-mpi/ompi@2541aa98abe61dc7fc29c412a66200b8e5f995ec
2010-03-09 01:56:33 +03:00
Move the RTE framework change into the trunk. With this change, all non-CR runtime code goes through one of the rte, dpm, or pubsub frameworks. This commit was SVN r27934.
2013-01-28 03:25:10 +04:00
ret = set_f(MPI_APPNUM, ompi_process_info.app_num);
- Since r22727 orte_app_idx_t was introduced, being a uint32_t (was previously an orte_std_cntr_t, which is int32_t). Comparison with < 0 don't make any sense, here. This commit was SVN r22799. The following SVN revision numbers were found above: r22727 --> open-mpi/ompi@2541aa98abe61dc7fc29c412a66200b8e5f995ec
2010-03-09 01:56:33 +03:00
Make it so the universe size is passed through the ODLS instead of through a gpr trigger during MPI init. This matches what is currently being done with the app number. The default odls has been updated and works fine. The process odls has been updated, but I could not verify its operation. The bproc ODLS has not been updated yet. Ralph will look at it soon. This commit was SVN r15257.
2007-07-02 05:33:35 +04:00
return ret;
- Upon Finalize, also release the memory of predefined attributes. This commit was SVN r9169.
2006-02-27 18:15:48 +03:00
}
Hey, sports fans!! Guess what?? Here's the huge registry check-in you've all been waiting for with baited breath. The revised version sends a single message to all processes at the various stage gates, thus making the startup much more scalable. I could provide you with all the tawdry details, but won't for now - you are welcome to ask, though, and I'll merrily bore your ears to tears. In addition, the commit contains the following: 1. set the ignore properties on ompi/debuggers and orte/mca/pls/poe 2. Added simplified subscribe and put functions to the registry's API. I have also converted all of the ompi functions that registered subscriptions to the new API, and caught their associated put's as well. In a follow-on commit, I'll be adding support for George's hetero arch registry subscription (wanted to get this one in first). This commit was SVN r7118.
2005-09-01 05:07:30 +04:00
- Upon Finalize, also release the memory of predefined attributes. This commit was SVN r9169.
2006-02-27 18:15:48 +03:00
int ompi_attr_free_predefined(void)
{
int ret;
if (OMPI_SUCCESS != (ret = free_comm(MPI_TAG_UB)) ||
OMPI_SUCCESS != (ret = free_comm(MPI_HOST)) ||
OMPI_SUCCESS != (ret = free_comm(MPI_IO)) ||
OMPI_SUCCESS != (ret = free_comm(MPI_WTIME_IS_GLOBAL)) ||
OMPI_SUCCESS != (ret = free_comm(MPI_APPNUM)) ||
OMPI_SUCCESS != (ret = free_comm(MPI_LASTUSEDCODE)) ||
OMPI_SUCCESS != (ret = free_comm(MPI_UNIVERSE_SIZE)) ||
OMPI_SUCCESS != (ret = free_win(MPI_WIN_BASE)) ||
OMPI_SUCCESS != (ret = free_win(MPI_WIN_SIZE)) ||
OMPI_SUCCESS != (ret = free_win(MPI_WIN_DISP_UNIT)) ||
#if 0
/* JMS For when we implement IMPI */
OMPI_SUCCESS != (ret = free_comm(IMPI_CLIENT_SIZE)) ||
OMPI_SUCCESS != (ret = free_comm(IMPI_CLIENT_COLOR)) ||
OMPI_SUCCESS != (ret = free_comm(IMPI_HOST_SIZE)) ||
OMPI_SUCCESS != (ret = free_comm(IMPI_HOST_COLOR)) ||
#endif
0) {
return ret;
}
return OMPI_SUCCESS;
The merged main trunk and gpr integration branch. Tested on Mac only so far - will check out and test on Linux. If that has a problem, will back all changes out (again), but I think we have this one correct. Will send out a more complete change notice once testing is complete. This commit was SVN r3644.
2004-11-20 22:12:43 +03:00
}
Submitted by: Jeff "I love MPI attributes" Squyres Reviewed by: Brian "MPI attributes ROCK" Barrett Bunches of changes to the attribute engine: - After many hours of discussion about MPI attributes, we came to the conclusion that MPI-2 Example 4.13 (the C->Fortran example) is just wrong. If you accept that, the rest of the text makes much more sense. - There are 9 inter-language cases: all combinations of (read, write) with C, Fortran MPI-1, and Fortran MPI-2 for each value. Each of the 9 cases have specific code for what is supposed to happen (and is labeled in the code with comments). There is a *lengthy* comment at the top of src/attribute/attribute.c that describes all of this. - All predefined attributes are now treated as if they were put from MPI-1 Fortran calls, with the exception of the window predefined attributes (which are irrelevant on the beta, because there is no one-sided support; preliminary fixes included in this patch, but will be fully addressed on the trunk) - MPI API calls (particularly the Fortran wrappers) are now fundamentally simpler -- they do *not* call the back-end MPI C API calls; instead, they call directly back into the attribute engine. - The MPI_LASTUSEDCODE attribute only exists on MPI_COMM_WORLD and is updated appropriately when user error classes are added. --> Note: Edgar made a suggestion that for communicator attributes, we ignore the communicator argument when retrieving attributes and simply return the value. This will likely only happen on the trunk, and will alleviate (from the user's perspective) the restriction that LASTUSEDCODE is only on MPI_COMM_WORLD. - The predefined attributes are now "better". We create keyvals separately than assigning values, and correctly distinguish between comm, type, and win attributes. Initial values are now set as if they were called from MPI-1 fortran. - Added a comment to the top of src/attribute/attribute_predefined.c explaining what each of the predefined attributes were and what OMPI sets them to be. This commit was SVN r6193.
2005-06-27 23:17:11 +04:00
static int create_comm(int target_keyval, bool want_inherit)
Some fixes for the attribute code: - move the attribute init section in ompi_mpi_init() down below where communicators are setup (we need MPI_COMM_WORLD to be setup before attributes and keyvals are setup) - removed confusing extra wrapper class around ompi_hash_table_t; looks like it was a victim of slow eroding of members so I put took it out back and put it out of its misery - added preliminary definitions for all the pre-defined keyvals. Still need more work here to assign their initial values, but I think Edgar was running into an atrribute problem and it may have been that the pre-defined attrs didn't yet exist. - removed some LAM-specific predefined keyvals from mpi.h This commit was SVN r2695.
2004-09-16 04:00:09 +04:00
{
int err;
int keyval;
ompi_attribute_fn_ptr_union_t copy;
ompi_attribute_fn_ptr_union_t del;
keyval = -1;
Add one more argument to the copy functions for the MPI objects. As this argument is the last one on the list and as on C the caller "make it right" this addition will not affect the way we handle the user defined copy functions. Only the C version of the function has this additional parameter. As it represent the pointer to the newly created MPI object It hold the key to allow us to modify the new object (communicator, window or type) depending on some key stored on the initial communicator. This commit was SVN r9371.
2006-03-23 07:47:14 +03:00
copy.attr_communicator_copy_fn = (MPI_Comm_internal_copy_attr_function*)
(want_inherit ? MPI_COMM_DUP_FN : MPI_COMM_NULL_COPY_FN);
Some fixes for the attribute code: - move the attribute init section in ompi_mpi_init() down below where communicators are setup (we need MPI_COMM_WORLD to be setup before attributes and keyvals are setup) - removed confusing extra wrapper class around ompi_hash_table_t; looks like it was a victim of slow eroding of members so I put took it out back and put it out of its misery - added preliminary definitions for all the pre-defined keyvals. Still need more work here to assign their initial values, but I think Edgar was running into an atrribute problem and it may have been that the pre-defined attrs didn't yet exist. - removed some LAM-specific predefined keyvals from mpi.h This commit was SVN r2695.
2004-09-16 04:00:09 +04:00
del.attr_communicator_delete_fn = MPI_COMM_NULL_DELETE_FN;
err = ompi_attr_create_keyval(COMM_ATTR, copy, del,
Fixes trac:817 The C++ bindings were not tracking keyvals properly -- they were freeing some internal meta data when Free_keyval() was called, not when the keyval was actually destroyed (keyvals are refcounted in the C layer, just like all other MPI objects, because they can live for long after their corresponding Free call is invoked). This commit fixes this problem and several other things: * Add infrastructure on the ompi_attribute_keyval_t for an "extra" destructor pointer that will be invoked during the "real" constructor (i.e., when OBJ_RELEASE puts the refcount to 0). This allows calling back into the C++ layer to release meta data associated with the keyval. * Adjust all cases where keyvals are created to pass in relevant destructors (NULL or the C++ destructor). * Do essentially the same for MPI::Comm, MPI::Win, and MPI:Datatype: * Move several functions out of the .cc file into the _inln.h file since they no longer require locks * Make the 4 Create_keyval() functions call a common back-end keyval creation function that does the Right Thing depending on whether C or C++ function pointers were used for the keyval functions. The back-end function does not call the corresponding C MPI_*_create_keyval function, but rather does the work itself so that it can associate a "destructor" callback for the C++ bindings for when the keyval is actually destroyed. * Change a few type names to be more indicative of what they are (mostly dealing with keyvals [not "keys"]). * Add the 3 missing bindings for MPI::Comm::Create_keyval(). * Remove MPI::Comm::comm_map (and associated types) because it's no longer necessary in the intercepts -- it was a by-product of being a portable C++ bindings layer. Now we can just query the C layer directly to figure out what type a communicator is. This solves some logistics / callback issues, too. * Rename several types, variables, and fix many comments in the back-end C attribute implementation to make the names really reflect what they are (keyvals vs. attributes). The previous names heavily overloaded the name "key" and were ''extremely'' confusing. This commit was SVN r13565. The following Trac tickets were found above: Ticket 817 --> https://svn.open-mpi.org/trac/ompi/ticket/817
2007-02-09 02:50:04 +03:00
&keyval, NULL, OMPI_KEYVAL_PREDEFINED, NULL);
Submitted by: Jeff "I love MPI attributes" Squyres Reviewed by: Brian "MPI attributes ROCK" Barrett Bunches of changes to the attribute engine: - After many hours of discussion about MPI attributes, we came to the conclusion that MPI-2 Example 4.13 (the C->Fortran example) is just wrong. If you accept that, the rest of the text makes much more sense. - There are 9 inter-language cases: all combinations of (read, write) with C, Fortran MPI-1, and Fortran MPI-2 for each value. Each of the 9 cases have specific code for what is supposed to happen (and is labeled in the code with comments). There is a *lengthy* comment at the top of src/attribute/attribute.c that describes all of this. - All predefined attributes are now treated as if they were put from MPI-1 Fortran calls, with the exception of the window predefined attributes (which are irrelevant on the beta, because there is no one-sided support; preliminary fixes included in this patch, but will be fully addressed on the trunk) - MPI API calls (particularly the Fortran wrappers) are now fundamentally simpler -- they do *not* call the back-end MPI C API calls; instead, they call directly back into the attribute engine. - The MPI_LASTUSEDCODE attribute only exists on MPI_COMM_WORLD and is updated appropriately when user error classes are added. --> Note: Edgar made a suggestion that for communicator attributes, we ignore the communicator argument when retrieving attributes and simply return the value. This will likely only happen on the trunk, and will alleviate (from the user's perspective) the restriction that LASTUSEDCODE is only on MPI_COMM_WORLD. - The predefined attributes are now "better". We create keyvals separately than assigning values, and correctly distinguish between comm, type, and win attributes. Initial values are now set as if they were called from MPI-1 fortran. - Added a comment to the top of src/attribute/attribute_predefined.c explaining what each of the predefined attributes were and what OMPI sets them to be. This commit was SVN r6193.
2005-06-27 23:17:11 +04:00
if (MPI_SUCCESS != err) {
Some fixes for the attribute code: - move the attribute init section in ompi_mpi_init() down below where communicators are setup (we need MPI_COMM_WORLD to be setup before attributes and keyvals are setup) - removed confusing extra wrapper class around ompi_hash_table_t; looks like it was a victim of slow eroding of members so I put took it out back and put it out of its misery - added preliminary definitions for all the pre-defined keyvals. Still need more work here to assign their initial values, but I think Edgar was running into an atrribute problem and it may have been that the pre-defined attrs didn't yet exist. - removed some LAM-specific predefined keyvals from mpi.h This commit was SVN r2695.
2004-09-16 04:00:09 +04:00
return err;
}
Submitted by: Jeff "I love MPI attributes" Squyres Reviewed by: Brian "MPI attributes ROCK" Barrett Bunches of changes to the attribute engine: - After many hours of discussion about MPI attributes, we came to the conclusion that MPI-2 Example 4.13 (the C->Fortran example) is just wrong. If you accept that, the rest of the text makes much more sense. - There are 9 inter-language cases: all combinations of (read, write) with C, Fortran MPI-1, and Fortran MPI-2 for each value. Each of the 9 cases have specific code for what is supposed to happen (and is labeled in the code with comments). There is a *lengthy* comment at the top of src/attribute/attribute.c that describes all of this. - All predefined attributes are now treated as if they were put from MPI-1 Fortran calls, with the exception of the window predefined attributes (which are irrelevant on the beta, because there is no one-sided support; preliminary fixes included in this patch, but will be fully addressed on the trunk) - MPI API calls (particularly the Fortran wrappers) are now fundamentally simpler -- they do *not* call the back-end MPI C API calls; instead, they call directly back into the attribute engine. - The MPI_LASTUSEDCODE attribute only exists on MPI_COMM_WORLD and is updated appropriately when user error classes are added. --> Note: Edgar made a suggestion that for communicator attributes, we ignore the communicator argument when retrieving attributes and simply return the value. This will likely only happen on the trunk, and will alleviate (from the user's perspective) the restriction that LASTUSEDCODE is only on MPI_COMM_WORLD. - The predefined attributes are now "better". We create keyvals separately than assigning values, and correctly distinguish between comm, type, and win attributes. Initial values are now set as if they were called from MPI-1 fortran. - Added a comment to the top of src/attribute/attribute_predefined.c explaining what each of the predefined attributes were and what OMPI sets them to be. This commit was SVN r6193.
2005-06-27 23:17:11 +04:00
if (target_keyval != keyval) {
return OMPI_ERR_BAD_PARAM;
Some fixes for the attribute code: - move the attribute init section in ompi_mpi_init() down below where communicators are setup (we need MPI_COMM_WORLD to be setup before attributes and keyvals are setup) - removed confusing extra wrapper class around ompi_hash_table_t; looks like it was a victim of slow eroding of members so I put took it out back and put it out of its misery - added preliminary definitions for all the pre-defined keyvals. Still need more work here to assign their initial values, but I think Edgar was running into an atrribute problem and it may have been that the pre-defined attrs didn't yet exist. - removed some LAM-specific predefined keyvals from mpi.h This commit was SVN r2695.
2004-09-16 04:00:09 +04:00
}
Submitted by: Jeff "I love MPI attributes" Squyres Reviewed by: Brian "MPI attributes ROCK" Barrett Bunches of changes to the attribute engine: - After many hours of discussion about MPI attributes, we came to the conclusion that MPI-2 Example 4.13 (the C->Fortran example) is just wrong. If you accept that, the rest of the text makes much more sense. - There are 9 inter-language cases: all combinations of (read, write) with C, Fortran MPI-1, and Fortran MPI-2 for each value. Each of the 9 cases have specific code for what is supposed to happen (and is labeled in the code with comments). There is a *lengthy* comment at the top of src/attribute/attribute.c that describes all of this. - All predefined attributes are now treated as if they were put from MPI-1 Fortran calls, with the exception of the window predefined attributes (which are irrelevant on the beta, because there is no one-sided support; preliminary fixes included in this patch, but will be fully addressed on the trunk) - MPI API calls (particularly the Fortran wrappers) are now fundamentally simpler -- they do *not* call the back-end MPI C API calls; instead, they call directly back into the attribute engine. - The MPI_LASTUSEDCODE attribute only exists on MPI_COMM_WORLD and is updated appropriately when user error classes are added. --> Note: Edgar made a suggestion that for communicator attributes, we ignore the communicator argument when retrieving attributes and simply return the value. This will likely only happen on the trunk, and will alleviate (from the user's perspective) the restriction that LASTUSEDCODE is only on MPI_COMM_WORLD. - The predefined attributes are now "better". We create keyvals separately than assigning values, and correctly distinguish between comm, type, and win attributes. Initial values are now set as if they were called from MPI-1 fortran. - Added a comment to the top of src/attribute/attribute_predefined.c explaining what each of the predefined attributes were and what OMPI sets them to be. This commit was SVN r6193.
2005-06-27 23:17:11 +04:00
return OMPI_SUCCESS;
}
- Upon Finalize, also release the memory of predefined attributes. This commit was SVN r9169.
2006-02-27 18:15:48 +03:00
static int free_comm(int keyval)
{
int key = keyval;
return ompi_attr_free_keyval (COMM_ATTR, &key, true);
}
Submitted by: Jeff "I love MPI attributes" Squyres Reviewed by: Brian "MPI attributes ROCK" Barrett Bunches of changes to the attribute engine: - After many hours of discussion about MPI attributes, we came to the conclusion that MPI-2 Example 4.13 (the C->Fortran example) is just wrong. If you accept that, the rest of the text makes much more sense. - There are 9 inter-language cases: all combinations of (read, write) with C, Fortran MPI-1, and Fortran MPI-2 for each value. Each of the 9 cases have specific code for what is supposed to happen (and is labeled in the code with comments). There is a *lengthy* comment at the top of src/attribute/attribute.c that describes all of this. - All predefined attributes are now treated as if they were put from MPI-1 Fortran calls, with the exception of the window predefined attributes (which are irrelevant on the beta, because there is no one-sided support; preliminary fixes included in this patch, but will be fully addressed on the trunk) - MPI API calls (particularly the Fortran wrappers) are now fundamentally simpler -- they do *not* call the back-end MPI C API calls; instead, they call directly back into the attribute engine. - The MPI_LASTUSEDCODE attribute only exists on MPI_COMM_WORLD and is updated appropriately when user error classes are added. --> Note: Edgar made a suggestion that for communicator attributes, we ignore the communicator argument when retrieving attributes and simply return the value. This will likely only happen on the trunk, and will alleviate (from the user's perspective) the restriction that LASTUSEDCODE is only on MPI_COMM_WORLD. - The predefined attributes are now "better". We create keyvals separately than assigning values, and correctly distinguish between comm, type, and win attributes. Initial values are now set as if they were called from MPI-1 fortran. - Added a comment to the top of src/attribute/attribute_predefined.c explaining what each of the predefined attributes were and what OMPI sets them to be. This commit was SVN r6193.
2005-06-27 23:17:11 +04:00
static int create_win(int target_keyval)
{
int err;
int keyval;
ompi_attribute_fn_ptr_union_t copy;
ompi_attribute_fn_ptr_union_t del;
Some fixes for the attribute code: - move the attribute init section in ompi_mpi_init() down below where communicators are setup (we need MPI_COMM_WORLD to be setup before attributes and keyvals are setup) - removed confusing extra wrapper class around ompi_hash_table_t; looks like it was a victim of slow eroding of members so I put took it out back and put it out of its misery - added preliminary definitions for all the pre-defined keyvals. Still need more work here to assign their initial values, but I think Edgar was running into an atrribute problem and it may have been that the pre-defined attrs didn't yet exist. - removed some LAM-specific predefined keyvals from mpi.h This commit was SVN r2695.
2004-09-16 04:00:09 +04:00
Submitted by: Jeff "I love MPI attributes" Squyres Reviewed by: Brian "MPI attributes ROCK" Barrett Bunches of changes to the attribute engine: - After many hours of discussion about MPI attributes, we came to the conclusion that MPI-2 Example 4.13 (the C->Fortran example) is just wrong. If you accept that, the rest of the text makes much more sense. - There are 9 inter-language cases: all combinations of (read, write) with C, Fortran MPI-1, and Fortran MPI-2 for each value. Each of the 9 cases have specific code for what is supposed to happen (and is labeled in the code with comments). There is a *lengthy* comment at the top of src/attribute/attribute.c that describes all of this. - All predefined attributes are now treated as if they were put from MPI-1 Fortran calls, with the exception of the window predefined attributes (which are irrelevant on the beta, because there is no one-sided support; preliminary fixes included in this patch, but will be fully addressed on the trunk) - MPI API calls (particularly the Fortran wrappers) are now fundamentally simpler -- they do *not* call the back-end MPI C API calls; instead, they call directly back into the attribute engine. - The MPI_LASTUSEDCODE attribute only exists on MPI_COMM_WORLD and is updated appropriately when user error classes are added. --> Note: Edgar made a suggestion that for communicator attributes, we ignore the communicator argument when retrieving attributes and simply return the value. This will likely only happen on the trunk, and will alleviate (from the user's perspective) the restriction that LASTUSEDCODE is only on MPI_COMM_WORLD. - The predefined attributes are now "better". We create keyvals separately than assigning values, and correctly distinguish between comm, type, and win attributes. Initial values are now set as if they were called from MPI-1 fortran. - Added a comment to the top of src/attribute/attribute_predefined.c explaining what each of the predefined attributes were and what OMPI sets them to be. This commit was SVN r6193.
2005-06-27 23:17:11 +04:00
keyval = -1;
Add one more argument to the copy functions for the MPI objects. As this argument is the last one on the list and as on C the caller "make it right" this addition will not affect the way we handle the user defined copy functions. Only the C version of the function has this additional parameter. As it represent the pointer to the newly created MPI object It hold the key to allow us to modify the new object (communicator, window or type) depending on some key stored on the initial communicator. This commit was SVN r9371.
2006-03-23 07:47:14 +03:00
copy.attr_win_copy_fn = (MPI_Win_internal_copy_attr_function*)MPI_WIN_NULL_COPY_FN;
Submitted by: Jeff "I love MPI attributes" Squyres Reviewed by: Brian "MPI attributes ROCK" Barrett Bunches of changes to the attribute engine: - After many hours of discussion about MPI attributes, we came to the conclusion that MPI-2 Example 4.13 (the C->Fortran example) is just wrong. If you accept that, the rest of the text makes much more sense. - There are 9 inter-language cases: all combinations of (read, write) with C, Fortran MPI-1, and Fortran MPI-2 for each value. Each of the 9 cases have specific code for what is supposed to happen (and is labeled in the code with comments). There is a *lengthy* comment at the top of src/attribute/attribute.c that describes all of this. - All predefined attributes are now treated as if they were put from MPI-1 Fortran calls, with the exception of the window predefined attributes (which are irrelevant on the beta, because there is no one-sided support; preliminary fixes included in this patch, but will be fully addressed on the trunk) - MPI API calls (particularly the Fortran wrappers) are now fundamentally simpler -- they do *not* call the back-end MPI C API calls; instead, they call directly back into the attribute engine. - The MPI_LASTUSEDCODE attribute only exists on MPI_COMM_WORLD and is updated appropriately when user error classes are added. --> Note: Edgar made a suggestion that for communicator attributes, we ignore the communicator argument when retrieving attributes and simply return the value. This will likely only happen on the trunk, and will alleviate (from the user's perspective) the restriction that LASTUSEDCODE is only on MPI_COMM_WORLD. - The predefined attributes are now "better". We create keyvals separately than assigning values, and correctly distinguish between comm, type, and win attributes. Initial values are now set as if they were called from MPI-1 fortran. - Added a comment to the top of src/attribute/attribute_predefined.c explaining what each of the predefined attributes were and what OMPI sets them to be. This commit was SVN r6193.
2005-06-27 23:17:11 +04:00
del.attr_win_delete_fn = MPI_WIN_NULL_DELETE_FN;
err = ompi_attr_create_keyval(WIN_ATTR, copy, del,
Fixes trac:817 The C++ bindings were not tracking keyvals properly -- they were freeing some internal meta data when Free_keyval() was called, not when the keyval was actually destroyed (keyvals are refcounted in the C layer, just like all other MPI objects, because they can live for long after their corresponding Free call is invoked). This commit fixes this problem and several other things: * Add infrastructure on the ompi_attribute_keyval_t for an "extra" destructor pointer that will be invoked during the "real" constructor (i.e., when OBJ_RELEASE puts the refcount to 0). This allows calling back into the C++ layer to release meta data associated with the keyval. * Adjust all cases where keyvals are created to pass in relevant destructors (NULL or the C++ destructor). * Do essentially the same for MPI::Comm, MPI::Win, and MPI:Datatype: * Move several functions out of the .cc file into the _inln.h file since they no longer require locks * Make the 4 Create_keyval() functions call a common back-end keyval creation function that does the Right Thing depending on whether C or C++ function pointers were used for the keyval functions. The back-end function does not call the corresponding C MPI_*_create_keyval function, but rather does the work itself so that it can associate a "destructor" callback for the C++ bindings for when the keyval is actually destroyed. * Change a few type names to be more indicative of what they are (mostly dealing with keyvals [not "keys"]). * Add the 3 missing bindings for MPI::Comm::Create_keyval(). * Remove MPI::Comm::comm_map (and associated types) because it's no longer necessary in the intercepts -- it was a by-product of being a portable C++ bindings layer. Now we can just query the C layer directly to figure out what type a communicator is. This solves some logistics / callback issues, too. * Rename several types, variables, and fix many comments in the back-end C attribute implementation to make the names really reflect what they are (keyvals vs. attributes). The previous names heavily overloaded the name "key" and were ''extremely'' confusing. This commit was SVN r13565. The following Trac tickets were found above: Ticket 817 --> https://svn.open-mpi.org/trac/ompi/ticket/817
2007-02-09 02:50:04 +03:00
&keyval, NULL, OMPI_KEYVAL_PREDEFINED, NULL);
Submitted by: Jeff "I love MPI attributes" Squyres Reviewed by: Brian "MPI attributes ROCK" Barrett Bunches of changes to the attribute engine: - After many hours of discussion about MPI attributes, we came to the conclusion that MPI-2 Example 4.13 (the C->Fortran example) is just wrong. If you accept that, the rest of the text makes much more sense. - There are 9 inter-language cases: all combinations of (read, write) with C, Fortran MPI-1, and Fortran MPI-2 for each value. Each of the 9 cases have specific code for what is supposed to happen (and is labeled in the code with comments). There is a *lengthy* comment at the top of src/attribute/attribute.c that describes all of this. - All predefined attributes are now treated as if they were put from MPI-1 Fortran calls, with the exception of the window predefined attributes (which are irrelevant on the beta, because there is no one-sided support; preliminary fixes included in this patch, but will be fully addressed on the trunk) - MPI API calls (particularly the Fortran wrappers) are now fundamentally simpler -- they do *not* call the back-end MPI C API calls; instead, they call directly back into the attribute engine. - The MPI_LASTUSEDCODE attribute only exists on MPI_COMM_WORLD and is updated appropriately when user error classes are added. --> Note: Edgar made a suggestion that for communicator attributes, we ignore the communicator argument when retrieving attributes and simply return the value. This will likely only happen on the trunk, and will alleviate (from the user's perspective) the restriction that LASTUSEDCODE is only on MPI_COMM_WORLD. - The predefined attributes are now "better". We create keyvals separately than assigning values, and correctly distinguish between comm, type, and win attributes. Initial values are now set as if they were called from MPI-1 fortran. - Added a comment to the top of src/attribute/attribute_predefined.c explaining what each of the predefined attributes were and what OMPI sets them to be. This commit was SVN r6193.
2005-06-27 23:17:11 +04:00
if (MPI_SUCCESS != err) {
return err;
}
if (target_keyval != keyval) {
return OMPI_ERR_BAD_PARAM;
}
Some fixes for the attribute code: - move the attribute init section in ompi_mpi_init() down below where communicators are setup (we need MPI_COMM_WORLD to be setup before attributes and keyvals are setup) - removed confusing extra wrapper class around ompi_hash_table_t; looks like it was a victim of slow eroding of members so I put took it out back and put it out of its misery - added preliminary definitions for all the pre-defined keyvals. Still need more work here to assign their initial values, but I think Edgar was running into an atrribute problem and it may have been that the pre-defined attrs didn't yet exist. - removed some LAM-specific predefined keyvals from mpi.h This commit was SVN r2695.
2004-09-16 04:00:09 +04:00
return OMPI_SUCCESS;
}
Submitted by: Jeff "I love MPI attributes" Squyres Reviewed by: Brian "MPI attributes ROCK" Barrett Bunches of changes to the attribute engine: - After many hours of discussion about MPI attributes, we came to the conclusion that MPI-2 Example 4.13 (the C->Fortran example) is just wrong. If you accept that, the rest of the text makes much more sense. - There are 9 inter-language cases: all combinations of (read, write) with C, Fortran MPI-1, and Fortran MPI-2 for each value. Each of the 9 cases have specific code for what is supposed to happen (and is labeled in the code with comments). There is a *lengthy* comment at the top of src/attribute/attribute.c that describes all of this. - All predefined attributes are now treated as if they were put from MPI-1 Fortran calls, with the exception of the window predefined attributes (which are irrelevant on the beta, because there is no one-sided support; preliminary fixes included in this patch, but will be fully addressed on the trunk) - MPI API calls (particularly the Fortran wrappers) are now fundamentally simpler -- they do *not* call the back-end MPI C API calls; instead, they call directly back into the attribute engine. - The MPI_LASTUSEDCODE attribute only exists on MPI_COMM_WORLD and is updated appropriately when user error classes are added. --> Note: Edgar made a suggestion that for communicator attributes, we ignore the communicator argument when retrieving attributes and simply return the value. This will likely only happen on the trunk, and will alleviate (from the user's perspective) the restriction that LASTUSEDCODE is only on MPI_COMM_WORLD. - The predefined attributes are now "better". We create keyvals separately than assigning values, and correctly distinguish between comm, type, and win attributes. Initial values are now set as if they were called from MPI-1 fortran. - Added a comment to the top of src/attribute/attribute_predefined.c explaining what each of the predefined attributes were and what OMPI sets them to be. This commit was SVN r6193.
2005-06-27 23:17:11 +04:00
- Upon Finalize, also release the memory of predefined attributes. This commit was SVN r9169.
2006-02-27 18:15:48 +03:00
static int free_win(int keyval)
{
int key = keyval;
return ompi_attr_free_keyval (WIN_ATTR, &key, true);
}
Submitted by: Jeff "I love MPI attributes" Squyres Reviewed by: Brian "MPI attributes ROCK" Barrett Bunches of changes to the attribute engine: - After many hours of discussion about MPI attributes, we came to the conclusion that MPI-2 Example 4.13 (the C->Fortran example) is just wrong. If you accept that, the rest of the text makes much more sense. - There are 9 inter-language cases: all combinations of (read, write) with C, Fortran MPI-1, and Fortran MPI-2 for each value. Each of the 9 cases have specific code for what is supposed to happen (and is labeled in the code with comments). There is a *lengthy* comment at the top of src/attribute/attribute.c that describes all of this. - All predefined attributes are now treated as if they were put from MPI-1 Fortran calls, with the exception of the window predefined attributes (which are irrelevant on the beta, because there is no one-sided support; preliminary fixes included in this patch, but will be fully addressed on the trunk) - MPI API calls (particularly the Fortran wrappers) are now fundamentally simpler -- they do *not* call the back-end MPI C API calls; instead, they call directly back into the attribute engine. - The MPI_LASTUSEDCODE attribute only exists on MPI_COMM_WORLD and is updated appropriately when user error classes are added. --> Note: Edgar made a suggestion that for communicator attributes, we ignore the communicator argument when retrieving attributes and simply return the value. This will likely only happen on the trunk, and will alleviate (from the user's perspective) the restriction that LASTUSEDCODE is only on MPI_COMM_WORLD. - The predefined attributes are now "better". We create keyvals separately than assigning values, and correctly distinguish between comm, type, and win attributes. Initial values are now set as if they were called from MPI-1 fortran. - Added a comment to the top of src/attribute/attribute_predefined.c explaining what each of the predefined attributes were and what OMPI sets them to be. This commit was SVN r6193.
2005-06-27 23:17:11 +04:00
static int set_f(int keyval, MPI_Fint value)
{
return ompi_attr_set_fortran_mpi1(COMM_ATTR, MPI_COMM_WORLD,
Hey, sports fans!! Guess what?? Here's the huge registry check-in you've all been waiting for with baited breath. The revised version sends a single message to all processes at the various stage gates, thus making the startup much more scalable. I could provide you with all the tawdry details, but won't for now - you are welcome to ask, though, and I'll merrily bore your ears to tears. In addition, the commit contains the following: 1. set the ignore properties on ompi/debuggers and orte/mca/pls/poe 2. Added simplified subscribe and put functions to the registry's API. I have also converted all of the ompi functions that registered subscriptions to the new API, and caught their associated put's as well. In a follow-on commit, I'll be adding support for George's hetero arch registry subscription (wanted to get this one in first). This commit was SVN r7118.
2005-09-01 05:07:30 +04:00
&MPI_COMM_WORLD->c_keyhash,
keyval, value,
Fixes trac:2767: Recursive locking when ROMIO used with THREAD_MULITPLE This commit was SVN r24681. The following Trac tickets were found above: Ticket 2767 --> https://svn.open-mpi.org/trac/ompi/ticket/2767
2011-05-04 10:31:42 +04:00
true);
Submitted by: Jeff "I love MPI attributes" Squyres Reviewed by: Brian "MPI attributes ROCK" Barrett Bunches of changes to the attribute engine: - After many hours of discussion about MPI attributes, we came to the conclusion that MPI-2 Example 4.13 (the C->Fortran example) is just wrong. If you accept that, the rest of the text makes much more sense. - There are 9 inter-language cases: all combinations of (read, write) with C, Fortran MPI-1, and Fortran MPI-2 for each value. Each of the 9 cases have specific code for what is supposed to happen (and is labeled in the code with comments). There is a *lengthy* comment at the top of src/attribute/attribute.c that describes all of this. - All predefined attributes are now treated as if they were put from MPI-1 Fortran calls, with the exception of the window predefined attributes (which are irrelevant on the beta, because there is no one-sided support; preliminary fixes included in this patch, but will be fully addressed on the trunk) - MPI API calls (particularly the Fortran wrappers) are now fundamentally simpler -- they do *not* call the back-end MPI C API calls; instead, they call directly back into the attribute engine. - The MPI_LASTUSEDCODE attribute only exists on MPI_COMM_WORLD and is updated appropriately when user error classes are added. --> Note: Edgar made a suggestion that for communicator attributes, we ignore the communicator argument when retrieving attributes and simply return the value. This will likely only happen on the trunk, and will alleviate (from the user's perspective) the restriction that LASTUSEDCODE is only on MPI_COMM_WORLD. - The predefined attributes are now "better". We create keyvals separately than assigning values, and correctly distinguish between comm, type, and win attributes. Initial values are now set as if they were called from MPI-1 fortran. - Added a comment to the top of src/attribute/attribute_predefined.c explaining what each of the predefined attributes were and what OMPI sets them to be. This commit was SVN r6193.
2005-06-27 23:17:11 +04:00
}
Копировать постоянную ссылку