2006-10-16 01:21:08 +04:00
|
|
|
# There can be multiple blocks of configuration data, chosen by
|
|
|
|
|
# compiler flags (using the compiler_args key to chose which block
|
|
|
|
|
# should be activated. This can be useful for multilib builds. See the
|
|
|
|
|
# multilib page at:
|
|
|
|
|
# https://svn.open-mpi.org/trac/ompi/wiki/compilerwrapper3264
|
|
|
|
|
# for more information.
|
|
|
|
|
|
2006-01-16 04:48:03 +03:00
|
|
|
project=Open MPI
|
|
|
|
|
project_short=OMPI
|
|
|
|
|
version=@OMPI_VERSION@
|
== Highlights ==
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
|
|
|
language=Fortran
|
2006-01-16 04:48:03 +03:00
|
|
|
compiler_env=FC
|
|
|
|
|
compiler_flags_env=FCFLAGS
|
|
|
|
|
compiler=@FC@
|
2006-02-13 05:39:32 +03:00
|
|
|
module_option=@OMPI_FC_MODULE_FLAG@
|
2006-01-16 04:48:03 +03:00
|
|
|
extra_includes=
|
|
|
|
|
preprocessor_flags=
|
2008-10-28 17:26:47 +03:00
|
|
|
compiler_flags=@OMPI_WRAPPER_EXTRA_FCFLAGS@
|
2006-01-16 04:48:03 +03:00
|
|
|
linker_flags=@OMPI_WRAPPER_EXTRA_LDFLAGS@
|
2012-12-14 20:34:20 +04:00
|
|
|
# Note that per https://svn.open-mpi.org/trac/ompi/ticket/3422, we
|
|
|
|
|
# intentionally only link in the MPI libraries (ORTE, OPAL, etc. are
|
|
|
|
|
# pulled in implicitly) because we intend MPI applications to only use
|
|
|
|
|
# the MPI API.
|
2013-01-29 04:00:43 +04:00
|
|
|
libs=@OMPI_FORTRAN_USEMPIF08_LIB@ @OMPI_FORTRAN_USEMPI_LIB@ -lmpi_mpifh -lmpi
|
|
|
|
|
libs_static=@OMPI_FORTRAN_USEMPIF08_LIB@ @OMPI_FORTRAN_USEMPI_LIB@ -lmpi_mpifh -lmpi -lopen-rte -lopen-pal @OMPI_WRAPPER_EXTRA_LIBS@
|
Put back the static-library-detection stuff from r27668, with some
additional functionality. Rationale (refs trac:3422):
* Normal MPI applications only ever use the MPI API. Hence, -lmpi is
sufficient (they'll never directly call ORTE or OPAL
functions). This is arguably the most common case.
* That being said, we do have some test programs (e.g., those in
orte/test/mpi) that call MPI functions but also call ORTE/OPAL
functions. I've also written the occasional MPI test program that
calls opal_output, for example (there even might be a few tests in
the IBM test suite that directly call ORTE/OPAL functions).
* Even though this is not a common case, these applications should
also compile/link with mpicc.
* So we should add a --openmpi:linkall option that will also link
in whatever is necessary to call ORTE/OPAL functions
* Yes, we could hard-code "-lopen-rte -lopen-pal" in Makefiles, but
we do reserve the right to change those library names and/or add
others someday, so it's better to abstract out the names and let
the wrapper supply whatever is necessary.
* ORTE programs, however, are different. They almost always call OPAL
functions (e.g., if they want to send a message, they must use the
OPAL DSS). As such, it seems like the ORTE programs should always
link in OPAL.
Therefore:
* Add undocumented --openmpi:linkall flag to the wrapper compilers.
See the comment in opal_wrapper.c for an explanation of what it
does. This flag is only intended for Open MPI developers -- not
end users. That's why it's undocumented.
* Update orte/test/mpi/Makefile.am to add --openmpi:linkall
* Make ortecc/ortec++'s wrapper data text files always explicitly
link in libopen-pal
This commit was SVN r27670.
The following SVN revision numbers were found above:
r27668 --> open-mpi/ompi@cf845897aa89407195aa13f56ddf4ec0d3c21a68
The following Trac tickets were found above:
Ticket 3422 --> https://svn.open-mpi.org/trac/ompi/ticket/3422
2012-12-14 02:31:37 +04:00
|
|
|
dyn_lib_file=libmpi.@OPAL_DYN_LIB_SUFFIX@
|
|
|
|
|
static_lib_file=libmpi.a
|
== Highlights ==
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
|
|
|
required_file=@OMPI_WRAPPER_FORTRAN_REQUIRED_FILE@
|
2007-04-21 04:16:31 +04:00
|
|
|
includedir=${includedir}
|
|
|
|
|
libdir=${libdir}
|