1
1
openmpi/opal/mca/mpool/hugepage/mpool_hugepage_component.c

403 строки
14 KiB
C
Исходник Обычный вид История

opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
/* -*- Mode: C; c-basic-offset:4 ; indent-tabs-mode:nil -*- */
/*
* Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
* University Research and Technology
* Corporation. All rights reserved.
* Copyright (c) 2004-2013 The University of Tennessee and The University
* of Tennessee Research Foundation. All rights
* reserved.
* Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
* University of Stuttgart. All rights reserved.
* Copyright (c) 2004-2005 The Regents of the University of California.
* All rights reserved.
* Copyright (c) 2006 Voltaire. All rights reserved.
* Copyright (c) 2007-2009 Cisco Systems, Inc. All rights reserved.
* Copyright (c) 2012-2016 Los Alamos National Security, LLC. All rights
* reserved.
* Copyright (c) 2016 Intel, Inc. All rights reserved.
* Copyright (c) 2016-2019 Research Organization for Information Science
* and Technology (RIST). All rights reserved.
opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
*
* $COPYRIGHT$
*
* Additional copyrights may follow
*
* $HEADER$
*/
#define OPAL_DISABLE_ENABLE_MEM_DEBUG 1
#include "opal_config.h"
#include "opal/mca/base/base.h"
#include "opal/runtime/opal_params.h"
#include "opal/mca/base/mca_base_pvar.h"
#include "opal/mca/mpool/base/base.h"
#include "opal/mca/allocator/base/base.h"
#include "opal/util/argv.h"
opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
#include "mpool_hugepage.h"
opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
#ifdef HAVE_UNISTD_H
#include <unistd.h>
#endif
#ifdef HAVE_MALLOC_H
#include <malloc.h>
#endif
#ifdef HAVE_SYS_VFS_H
#include <sys/vfs.h>
#endif
#ifdef HAVE_SYS_MOUNT_H
#include <sys/mount.h>
#endif
#ifdef HAVE_SYS_PARAM_H
#include <sys/param.h>
#endif
#ifdef HAVE_SYS_MMAN_H
#include <sys/mman.h>
#endif
#ifdef HAVE_MNTENT_H
#include <mntent.h>
#endif
opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
#include <fcntl.h>
/*
* Note that some OS's (e.g., NetBSD and Solaris) have statfs(), but
* no struct statfs (!). So check to make sure we have struct statfs
* before allowing the use of statfs().
*/
#if defined(HAVE_STATFS) && (defined(HAVE_STRUCT_STATFS_F_FSTYPENAME) || \
defined(HAVE_STRUCT_STATFS_F_TYPE))
#define USE_STATFS 1
#endif
opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
/*
* Local functions
*/
static int mca_mpool_hugepage_open (void);
static int mca_mpool_hugepage_close (void);
static int mca_mpool_hugepage_register (void);
static int mca_mpool_hugepage_query (const char *hints, int *priority,
mca_mpool_base_module_t **module);
static void mca_mpool_hugepage_find_hugepages (void);
static int mca_mpool_hugepage_priority;
static unsigned long mca_mpool_hugepage_page_size;
mca_mpool_hugepage_component_t mca_mpool_hugepage_component = {
{
/* First, the mca_base_component_t struct containing meta
information about the component itself */
.mpool_version ={
MCA_MPOOL_BASE_VERSION_3_0_0,
.mca_component_name = "hugepage",
MCA_BASE_MAKE_VERSION(component, OPAL_MAJOR_VERSION, OPAL_MINOR_VERSION,
OPAL_RELEASE_VERSION),
.mca_open_component = mca_mpool_hugepage_open,
.mca_close_component = mca_mpool_hugepage_close,
.mca_register_component_params = mca_mpool_hugepage_register,
},
.mpool_data = {
/* The component is checkpoint ready */
MCA_BASE_METADATA_PARAM_CHECKPOINT
},
.mpool_query = mca_mpool_hugepage_query,
},
};
/**
* component open/close/init function
*/
static int mca_mpool_hugepage_register(void)
{
mca_mpool_hugepage_priority = 50;
(void) mca_base_component_var_register (&mca_mpool_hugepage_component.super.mpool_version,
"priority", "Default priority of the hugepage mpool component "
"(default: 50)", MCA_BASE_VAR_TYPE_INT, NULL, 0, 0,
OPAL_INFO_LVL_9, MCA_BASE_VAR_SCOPE_LOCAL,
&mca_mpool_hugepage_priority);
mca_mpool_hugepage_page_size = 1 << 21;
(void) mca_base_component_var_register (&mca_mpool_hugepage_component.super.mpool_version,
"page_size", "Default huge page size of the hugepage mpool component "
"(default: 2M)", MCA_BASE_VAR_TYPE_INT, NULL, 0, 0,
OPAL_INFO_LVL_9, MCA_BASE_VAR_SCOPE_LOCAL,
&mca_mpool_hugepage_page_size);
mca_mpool_hugepage_component.bytes_allocated = 0;
(void) mca_base_component_pvar_register (&mca_mpool_hugepage_component.super.mpool_version,
"bytes_allocated", "Number of bytes currently allocated in the mpool "
"hugepage component", OPAL_INFO_LVL_3, MCA_BASE_PVAR_CLASS_SIZE,
MCA_BASE_VAR_TYPE_UNSIGNED_LONG, NULL, MCA_BASE_VAR_BIND_NO_OBJECT,
MCA_BASE_PVAR_FLAG_READONLY | MCA_BASE_PVAR_FLAG_CONTINUOUS,
NULL, NULL, NULL, (void *) &mca_mpool_hugepage_component.bytes_allocated);
opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
return OPAL_SUCCESS;
}
static int mca_mpool_hugepage_open (void)
{
mca_mpool_hugepage_module_t *hugepage_module;
mca_mpool_hugepage_hugepage_t *hp;
int module_index, rc;
OBJ_CONSTRUCT(&mca_mpool_hugepage_component.huge_pages, opal_list_t);
mca_mpool_hugepage_find_hugepages ();
if (0 == opal_list_get_size (&mca_mpool_hugepage_component.huge_pages)) {
return OPAL_SUCCESS;
}
mca_mpool_hugepage_component.modules = (mca_mpool_hugepage_module_t *)
calloc (opal_list_get_size (&mca_mpool_hugepage_component.huge_pages),
sizeof (mca_mpool_hugepage_module_t));
if (NULL == mca_mpool_hugepage_component.modules) {
return OPAL_ERR_OUT_OF_RESOURCE;
}
module_index = 0;
OPAL_LIST_FOREACH(hp, &mca_mpool_hugepage_component.huge_pages, mca_mpool_hugepage_hugepage_t) {
hugepage_module = mca_mpool_hugepage_component.modules + module_index;
rc = mca_mpool_hugepage_module_init (hugepage_module, hp);
if (OPAL_SUCCESS != rc) {
continue;
}
module_index++;
}
mca_mpool_hugepage_component.module_count = module_index;
return OPAL_SUCCESS;
}
static int mca_mpool_hugepage_close (void)
{
OPAL_LIST_DESTRUCT(&mca_mpool_hugepage_component.huge_pages);
for (int i = 0 ; i < mca_mpool_hugepage_component.module_count ; ++i) {
mca_mpool_hugepage_module_t *module = mca_mpool_hugepage_component.modules + i;
module->super.mpool_finalize (&module->super);
}
free (mca_mpool_hugepage_component.modules);
mca_mpool_hugepage_component.modules = NULL;
return OPAL_SUCCESS;
}
#ifdef HAVE_MNTENT_H
opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
static int page_compare (opal_list_item_t **a, opal_list_item_t **b) {
mca_mpool_hugepage_hugepage_t *pagea = (mca_mpool_hugepage_hugepage_t *) *a;
mca_mpool_hugepage_hugepage_t *pageb = (mca_mpool_hugepage_hugepage_t *) *b;
if (pagea->page_size > pageb->page_size) {
return 1;
} else if (pagea->page_size < pageb->page_size) {
return -1;
}
return 0;
}
#endif
opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
static void mca_mpool_hugepage_find_hugepages (void) {
#ifdef HAVE_MNTENT_H
opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
mca_mpool_hugepage_hugepage_t *hp;
FILE *fh;
struct mntent *mntent;
char *opts, *tok, *ctx;
opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
fh = setmntent ("/proc/mounts", "r");
opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
if (NULL == fh) {
return;
}
while (NULL != (mntent = getmntent(fh))) {
opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
unsigned long page_size = 0;
if (0 != strcmp(mntent->mnt_type, "hugetlbfs")) {
opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
continue;
}
opts = strdup(mntent->mnt_opts);
if (NULL == opts) {
break;
}
tok = strtok_r (opts, ",", &ctx);
opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
do {
if (0 == strncmp (tok, "pagesize", 8)) {
break;
}
tok = strtok_r (NULL, ",", &ctx);
} while (tok);
if (!tok) {
#if defined(USE_STATFS)
opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
struct statfs info;
statfs (mntent->mnt_dir, &info);
#elif defined(HAVE_STATVFS)
struct statvfs info;
statvfs (mntent->mnt_dir, &info);
opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
#endif
page_size = info.f_bsize;
opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
} else {
(void) sscanf (tok, "pagesize=%lu", &page_size);
opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
}
free(opts);
opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
if (0 == page_size) {
/* could not get page size */
continue;
}
hp = OBJ_NEW(mca_mpool_hugepage_hugepage_t);
if (NULL == hp) {
break;
}
hp->path = strdup (mntent->mnt_dir);
opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
hp->page_size = page_size;
if(0 == access (hp->path, R_OK | W_OK)){
opal_output_verbose (MCA_BASE_VERBOSE_INFO, opal_mpool_base_framework.framework_output,
"found huge page with size = %lu, path = %s, mmap flags = 0x%x, adding to list",
hp->page_size, hp->path, hp->mmap_flags);
opal_list_append (&mca_mpool_hugepage_component.huge_pages, &hp->super);
} else {
opal_output_verbose (MCA_BASE_VERBOSE_INFO, opal_mpool_base_framework.framework_output,
"found huge page with size = %lu, path = %s, mmap flags = 0x%x, with invalid "
"permissions, skipping", hp->page_size, hp->path, hp->mmap_flags);
OBJ_RELEASE(hp);
}
opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
}
opal_list_sort (&mca_mpool_hugepage_component.huge_pages, page_compare);
endmntent (fh);
#endif
opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
}
static int mca_mpool_hugepage_query (const char *hints, int *priority_out,
mca_mpool_base_module_t **module)
{
unsigned long page_size = 0;
char **hints_array;
int my_priority = mca_mpool_hugepage_priority;
char *tmp;
bool found = false;
if (0 == mca_mpool_hugepage_component.module_count) {
return OPAL_ERR_NOT_AVAILABLE;
}
if (hints) {
hints_array = opal_argv_split (hints, ',');
if (NULL == hints_array) {
return OPAL_ERR_OUT_OF_RESOURCE;
}
for (int i = 0 ; hints_array[i] ; ++i) {
char *key = hints_array[i];
char *value = NULL;
if (NULL != (tmp = strchr (key, '='))) {
value = tmp + 1;
*tmp = '\0';
}
if (0 == strcasecmp ("mpool", key)) {
if (value && 0 == strcasecmp ("hugepage", value)) {
/* this mpool was requested by name */
my_priority = 100;
opal_output_verbose (MCA_BASE_VERBOSE_INFO, opal_mpool_base_framework.framework_output,
"hugepage mpool matches hint: %s=%s", key, value);
} else {
/* different mpool requested */
my_priority = 0;
opal_output_verbose (MCA_BASE_VERBOSE_INFO, opal_mpool_base_framework.framework_output,
"hugepage mpool does not match hint: %s=%s", key, value);
opal_argv_free (hints_array);
opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
return OPAL_ERR_NOT_FOUND;
}
}
if (0 == strcasecmp ("page_size", key) && value) {
opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
page_size = strtoul (value, &tmp, 0);
if (*tmp) {
switch (*tmp) {
case 'g':
case 'G':
page_size *= 1024;
/* fall through */
opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
case 'm':
case 'M':
page_size *= 1024;
/* fall through */
opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
case 'k':
case 'K':
page_size *= 1024;
break;
default:
page_size = -1;
}
}
opal_output_verbose (MCA_BASE_VERBOSE_INFO, opal_mpool_base_framework.framework_output,
"hugepage mpool requested page size: %lu", page_size);
}
}
opal_argv_free (hints_array);
}
if (0 == page_size) {
/* use default huge page size */
page_size = mca_mpool_hugepage_page_size;
if (my_priority < 100) {
/* take a priority hit if this mpool was not asked for by name */
my_priority = 0;
}
opal_output_verbose (MCA_BASE_VERBOSE_WARN, opal_mpool_base_framework.framework_output,
"hugepage mpool did not match any hints: %s", hints);
}
for (int i = 0 ; i < mca_mpool_hugepage_component.module_count ; ++i) {
mca_mpool_hugepage_module_t *hugepage_module = mca_mpool_hugepage_component.modules + i;
if (hugepage_module->huge_page->page_size != page_size) {
continue;
}
my_priority = (my_priority < 80) ? my_priority + 20 : 100;
if (module) {
*module = &hugepage_module->super;
}
opal_output_verbose (MCA_BASE_VERBOSE_INFO, opal_mpool_base_framework.framework_output,
"matches page size hint. page size: %lu, path: %s, mmap flags: "
"0x%x", page_size, hugepage_module->huge_page->path,
hugepage_module->huge_page->mmap_flags);
found = true;
break;
}
if (!found) {
opal_output_verbose (MCA_BASE_VERBOSE_WARN, opal_mpool_base_framework.framework_output,
"could not find page matching page request: %lu", page_size);
return OPAL_ERR_NOT_FOUND;
}
if (priority_out) {
*priority_out = my_priority;
}
return OPAL_SUCCESS;
}