1
1
openmpi/opal/util/net.c

500 строки
13 KiB
C
Исходник Обычный вид История

/*
* Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
* University Research and Technology
* Corporation. All rights reserved.
* Copyright (c) 2004-2005 The University of Tennessee and The University
* of Tennessee Research Foundation. All rights
* reserved.
2015-06-24 06:59:57 +03:00
* Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
* University of Stuttgart. All rights reserved.
* Copyright (c) 2004-2005 The Regents of the University of California.
* All rights reserved.
* Copyright (c) 2007 Los Alamos National Security, LLC. All rights
2015-06-24 06:59:57 +03:00
* reserved.
* Copyright (c) 2009-2015 Cisco Systems, Inc. All rights reserved.
* Copyright (c) 2013 Intel, Inc. All rights reserved.
* Copyright (c) 2015 Research Organization for Information Science
* and Technology (RIST). All rights reserved.
* $COPYRIGHT$
2015-06-24 06:59:57 +03:00
*
* Additional copyrights may follow
2015-06-24 06:59:57 +03:00
*
* $HEADER$
*/
#include "opal_config.h"
#include <stdio.h>
#include <string.h>
#ifdef HAVE_UNISTD_H
#include <unistd.h>
#endif
#include <errno.h>
#ifdef HAVE_SYS_TYPES_H
#include <sys/types.h>
#endif
#ifdef HAVE_SYS_SOCKET_H
#include <sys/socket.h>
#endif
#ifdef HAVE_SYS_SOCKIO_H
#include <sys/sockio.h>
#endif
#ifdef HAVE_SYS_IOCTL_H
#include <sys/ioctl.h>
#endif
#ifdef HAVE_NETINET_IN_H
#include <netinet/in.h>
#endif
#ifdef HAVE_ARPA_INET_H
#include <arpa/inet.h>
#endif
#ifdef HAVE_NET_IF_H
#if defined(__APPLE__) && defined(_LP64)
/* Apple engineering suggested using options align=power as a
workaround for a bug in OS X 10.4 (Tiger) that prevented ioctl(...,
SIOCGIFCONF, ...) from working properly in 64 bit mode on Power PC.
It turns out that the underlying issue is the size of struct
ifconf, which the kernel expects to be 12 and natural 64 bit
alignment would make 16. The same bug appears in 64 bit mode on
Intel macs, but align=power is a no-op there, so instead, use the
pack pragma to instruct the compiler to pack on 4 byte words, which
has the same effect as align=power for our needs and works on both
Intel and Power PC Macs. */
#pragma pack(push,4)
#endif
#include <net/if.h>
#if defined(__APPLE__) && defined(_LP64)
#pragma pack(pop)
#endif
#endif
#ifdef HAVE_NETDB_H
#include <netdb.h>
#endif
#ifdef HAVE_IFADDRS_H
#include <ifaddrs.h>
#endif
#include "opal/util/net.h"
#include "opal/util/output.h"
#include "opal/util/argv.h"
#include "opal/util/show_help.h"
#include "opal/constants.h"
#include "opal/threads/tsd.h"
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-28 01:09:41 +04:00
#include "opal/runtime/opal_params.h"
/* this function doesn't depend on sockaddr_h */
bool opal_net_isaddr(const char *name)
{
As per the RFC, bring in the ORTE async progress code and the rewrite of OOB: *** THIS RFC INCLUDES A MINOR CHANGE TO THE MPI-RTE INTERFACE *** Note: during the course of this work, it was necessary to completely separate the MPI and RTE progress engines. There were multiple places in the MPI layer where ORTE_WAIT_FOR_COMPLETION was being used. A new OMPI_WAIT_FOR_COMPLETION macro was created (defined in ompi/mca/rte/rte.h) that simply cycles across opal_progress until the provided flag becomes false. Places where the MPI layer blocked waiting for RTE to complete an event have been modified to use this macro. *************************************************************************************** I am reissuing this RFC because of the time that has passed since its original release. Since its initial release and review, I have debugged it further to ensure it fully supports tests like loop_spawn. It therefore seems ready for merge back to the trunk. Given its prior review, I have set the timeout for one week. The code is in https://bitbucket.org/rhc/ompi-oob2 WHAT: Rewrite of ORTE OOB WHY: Support asynchronous progress and a host of other features WHEN: Wed, August 21 SYNOPSIS: The current OOB has served us well, but a number of limitations have been identified over the years. Specifically: * it is only progressed when called via opal_progress, which can lead to hangs or recursive calls into libevent (which is not supported by that code) * we've had issues when multiple NICs are available as the code doesn't "shift" messages between transports - thus, all nodes had to be available via the same TCP interface. * the OOB "unloads" incoming opal_buffer_t objects during the transmission, thus preventing use of OBJ_RETAIN in the code when repeatedly sending the same message to multiple recipients * there is no failover mechanism across NICs - if the selected NIC (or its attached switch) fails, we are forced to abort * only one transport (i.e., component) can be "active" The revised OOB resolves these problems: * async progress is used for all application processes, with the progress thread blocking in the event library * each available TCP NIC is supported by its own TCP module. The ability to asynchronously progress each module independently is provided, but not enabled by default (a runtime MCA parameter turns it "on") * multi-address TCP NICs (e.g., a NIC with both an IPv4 and IPv6 address, or with virtual interfaces) are supported - reachability is determined by comparing the contact info for a peer against all addresses within the range covered by the address/mask pairs for the NIC. * a message that arrives on one TCP NIC is automatically shifted to whatever NIC that is connected to the next "hop" if that peer cannot be reached by the incoming NIC. If no TCP module will reach the peer, then the OOB attempts to send the message via all other available components - if none can reach the peer, then an "error" is reported back to the RML, which then calls the errmgr for instructions. * opal_buffer_t now conforms to standard object rules re OBJ_RETAIN as we no longer "unload" the incoming object * NIC failure is reported to the TCP component, which then tries to resend the message across any other available TCP NIC. If that doesn't work, then the message is given back to the OOB base to try using other components. If all that fails, then the error is reported to the RML, which reports to the errmgr for instructions * obviously from the above, multiple OOB components (e.g., TCP and UD) can be active in parallel * the matching code has been moved to the RML (and out of the OOB/TCP component) so it is independent of transport * routing is done by the individual OOB modules (as opposed to the RML). Thus, both routed and non-routed transports can simultaneously be active * all blocking send/recv APIs have been removed. Everything operates asynchronously. KNOWN LIMITATIONS: * although provision is made for component failover as described above, the code for doing so has not been fully implemented yet. At the moment, if all connections for a given peer fail, the errmgr is notified of a "lost connection", which by default results in termination of the job if it was a lifeline * the IPv6 code is present and compiles, but is not complete. Since the current IPv6 support in the OOB doesn't work anyway, I don't consider this a blocker * routing is performed at the individual module level, yet the active routed component is selected on a global basis. We probably should update that to reflect that different transports may need/choose to route in different ways * obviously, not every error path has been tested nor necessarily covered * determining abnormal termination is more challenging than in the old code as we now potentially have multiple ways of connecting to a process. Ideally, we would declare "connection failed" when *all* transports can no longer reach the process, but that requires some additional (possibly complex) code. For now, the code replicates the old behavior only somewhat modified - i.e., if a module sees its connection fail, it checks to see if it is a lifeline. If so, it notifies the errmgr that the lifeline is lost - otherwise, it notifies the errmgr that a non-lifeline connection was lost. * reachability is determined solely on the basis of a shared subnet address/mask - more sophisticated algorithms (e.g., the one used in the tcp btl) are required to handle routing via gateways * the RML needs to assign sequence numbers to each message on a per-peer basis. The receiving RML will then deliver messages in order, thus preventing out-of-order messaging in the case where messages travel across different transports or a message needs to be redirected/resent due to failure of a NIC This commit was SVN r29058.
2013-08-22 20:37:40 +04:00
struct addrinfo hint, *res = NULL;
As per the RFC, bring in the ORTE async progress code and the rewrite of OOB: *** THIS RFC INCLUDES A MINOR CHANGE TO THE MPI-RTE INTERFACE *** Note: during the course of this work, it was necessary to completely separate the MPI and RTE progress engines. There were multiple places in the MPI layer where ORTE_WAIT_FOR_COMPLETION was being used. A new OMPI_WAIT_FOR_COMPLETION macro was created (defined in ompi/mca/rte/rte.h) that simply cycles across opal_progress until the provided flag becomes false. Places where the MPI layer blocked waiting for RTE to complete an event have been modified to use this macro. *************************************************************************************** I am reissuing this RFC because of the time that has passed since its original release. Since its initial release and review, I have debugged it further to ensure it fully supports tests like loop_spawn. It therefore seems ready for merge back to the trunk. Given its prior review, I have set the timeout for one week. The code is in https://bitbucket.org/rhc/ompi-oob2 WHAT: Rewrite of ORTE OOB WHY: Support asynchronous progress and a host of other features WHEN: Wed, August 21 SYNOPSIS: The current OOB has served us well, but a number of limitations have been identified over the years. Specifically: * it is only progressed when called via opal_progress, which can lead to hangs or recursive calls into libevent (which is not supported by that code) * we've had issues when multiple NICs are available as the code doesn't "shift" messages between transports - thus, all nodes had to be available via the same TCP interface. * the OOB "unloads" incoming opal_buffer_t objects during the transmission, thus preventing use of OBJ_RETAIN in the code when repeatedly sending the same message to multiple recipients * there is no failover mechanism across NICs - if the selected NIC (or its attached switch) fails, we are forced to abort * only one transport (i.e., component) can be "active" The revised OOB resolves these problems: * async progress is used for all application processes, with the progress thread blocking in the event library * each available TCP NIC is supported by its own TCP module. The ability to asynchronously progress each module independently is provided, but not enabled by default (a runtime MCA parameter turns it "on") * multi-address TCP NICs (e.g., a NIC with both an IPv4 and IPv6 address, or with virtual interfaces) are supported - reachability is determined by comparing the contact info for a peer against all addresses within the range covered by the address/mask pairs for the NIC. * a message that arrives on one TCP NIC is automatically shifted to whatever NIC that is connected to the next "hop" if that peer cannot be reached by the incoming NIC. If no TCP module will reach the peer, then the OOB attempts to send the message via all other available components - if none can reach the peer, then an "error" is reported back to the RML, which then calls the errmgr for instructions. * opal_buffer_t now conforms to standard object rules re OBJ_RETAIN as we no longer "unload" the incoming object * NIC failure is reported to the TCP component, which then tries to resend the message across any other available TCP NIC. If that doesn't work, then the message is given back to the OOB base to try using other components. If all that fails, then the error is reported to the RML, which reports to the errmgr for instructions * obviously from the above, multiple OOB components (e.g., TCP and UD) can be active in parallel * the matching code has been moved to the RML (and out of the OOB/TCP component) so it is independent of transport * routing is done by the individual OOB modules (as opposed to the RML). Thus, both routed and non-routed transports can simultaneously be active * all blocking send/recv APIs have been removed. Everything operates asynchronously. KNOWN LIMITATIONS: * although provision is made for component failover as described above, the code for doing so has not been fully implemented yet. At the moment, if all connections for a given peer fail, the errmgr is notified of a "lost connection", which by default results in termination of the job if it was a lifeline * the IPv6 code is present and compiles, but is not complete. Since the current IPv6 support in the OOB doesn't work anyway, I don't consider this a blocker * routing is performed at the individual module level, yet the active routed component is selected on a global basis. We probably should update that to reflect that different transports may need/choose to route in different ways * obviously, not every error path has been tested nor necessarily covered * determining abnormal termination is more challenging than in the old code as we now potentially have multiple ways of connecting to a process. Ideally, we would declare "connection failed" when *all* transports can no longer reach the process, but that requires some additional (possibly complex) code. For now, the code replicates the old behavior only somewhat modified - i.e., if a module sees its connection fail, it checks to see if it is a lifeline. If so, it notifies the errmgr that the lifeline is lost - otherwise, it notifies the errmgr that a non-lifeline connection was lost. * reachability is determined solely on the basis of a shared subnet address/mask - more sophisticated algorithms (e.g., the one used in the tcp btl) are required to handle routing via gateways * the RML needs to assign sequence numbers to each message on a per-peer basis. The receiving RML will then deliver messages in order, thus preventing out-of-order messaging in the case where messages travel across different transports or a message needs to be redirected/resent due to failure of a NIC This commit was SVN r29058.
2013-08-22 20:37:40 +04:00
/* initialize the hint */
memset(&hint, '\0', sizeof hint);
As per the RFC, bring in the ORTE async progress code and the rewrite of OOB: *** THIS RFC INCLUDES A MINOR CHANGE TO THE MPI-RTE INTERFACE *** Note: during the course of this work, it was necessary to completely separate the MPI and RTE progress engines. There were multiple places in the MPI layer where ORTE_WAIT_FOR_COMPLETION was being used. A new OMPI_WAIT_FOR_COMPLETION macro was created (defined in ompi/mca/rte/rte.h) that simply cycles across opal_progress until the provided flag becomes false. Places where the MPI layer blocked waiting for RTE to complete an event have been modified to use this macro. *************************************************************************************** I am reissuing this RFC because of the time that has passed since its original release. Since its initial release and review, I have debugged it further to ensure it fully supports tests like loop_spawn. It therefore seems ready for merge back to the trunk. Given its prior review, I have set the timeout for one week. The code is in https://bitbucket.org/rhc/ompi-oob2 WHAT: Rewrite of ORTE OOB WHY: Support asynchronous progress and a host of other features WHEN: Wed, August 21 SYNOPSIS: The current OOB has served us well, but a number of limitations have been identified over the years. Specifically: * it is only progressed when called via opal_progress, which can lead to hangs or recursive calls into libevent (which is not supported by that code) * we've had issues when multiple NICs are available as the code doesn't "shift" messages between transports - thus, all nodes had to be available via the same TCP interface. * the OOB "unloads" incoming opal_buffer_t objects during the transmission, thus preventing use of OBJ_RETAIN in the code when repeatedly sending the same message to multiple recipients * there is no failover mechanism across NICs - if the selected NIC (or its attached switch) fails, we are forced to abort * only one transport (i.e., component) can be "active" The revised OOB resolves these problems: * async progress is used for all application processes, with the progress thread blocking in the event library * each available TCP NIC is supported by its own TCP module. The ability to asynchronously progress each module independently is provided, but not enabled by default (a runtime MCA parameter turns it "on") * multi-address TCP NICs (e.g., a NIC with both an IPv4 and IPv6 address, or with virtual interfaces) are supported - reachability is determined by comparing the contact info for a peer against all addresses within the range covered by the address/mask pairs for the NIC. * a message that arrives on one TCP NIC is automatically shifted to whatever NIC that is connected to the next "hop" if that peer cannot be reached by the incoming NIC. If no TCP module will reach the peer, then the OOB attempts to send the message via all other available components - if none can reach the peer, then an "error" is reported back to the RML, which then calls the errmgr for instructions. * opal_buffer_t now conforms to standard object rules re OBJ_RETAIN as we no longer "unload" the incoming object * NIC failure is reported to the TCP component, which then tries to resend the message across any other available TCP NIC. If that doesn't work, then the message is given back to the OOB base to try using other components. If all that fails, then the error is reported to the RML, which reports to the errmgr for instructions * obviously from the above, multiple OOB components (e.g., TCP and UD) can be active in parallel * the matching code has been moved to the RML (and out of the OOB/TCP component) so it is independent of transport * routing is done by the individual OOB modules (as opposed to the RML). Thus, both routed and non-routed transports can simultaneously be active * all blocking send/recv APIs have been removed. Everything operates asynchronously. KNOWN LIMITATIONS: * although provision is made for component failover as described above, the code for doing so has not been fully implemented yet. At the moment, if all connections for a given peer fail, the errmgr is notified of a "lost connection", which by default results in termination of the job if it was a lifeline * the IPv6 code is present and compiles, but is not complete. Since the current IPv6 support in the OOB doesn't work anyway, I don't consider this a blocker * routing is performed at the individual module level, yet the active routed component is selected on a global basis. We probably should update that to reflect that different transports may need/choose to route in different ways * obviously, not every error path has been tested nor necessarily covered * determining abnormal termination is more challenging than in the old code as we now potentially have multiple ways of connecting to a process. Ideally, we would declare "connection failed" when *all* transports can no longer reach the process, but that requires some additional (possibly complex) code. For now, the code replicates the old behavior only somewhat modified - i.e., if a module sees its connection fail, it checks to see if it is a lifeline. If so, it notifies the errmgr that the lifeline is lost - otherwise, it notifies the errmgr that a non-lifeline connection was lost. * reachability is determined solely on the basis of a shared subnet address/mask - more sophisticated algorithms (e.g., the one used in the tcp btl) are required to handle routing via gateways * the RML needs to assign sequence numbers to each message on a per-peer basis. The receiving RML will then deliver messages in order, thus preventing out-of-order messaging in the case where messages travel across different transports or a message needs to be redirected/resent due to failure of a NIC This commit was SVN r29058.
2013-08-22 20:37:40 +04:00
/* indicate that we don't know the family */
hint.ai_family = PF_UNSPEC;
hint.ai_flags = AI_NUMERICHOST;
As per the RFC, bring in the ORTE async progress code and the rewrite of OOB: *** THIS RFC INCLUDES A MINOR CHANGE TO THE MPI-RTE INTERFACE *** Note: during the course of this work, it was necessary to completely separate the MPI and RTE progress engines. There were multiple places in the MPI layer where ORTE_WAIT_FOR_COMPLETION was being used. A new OMPI_WAIT_FOR_COMPLETION macro was created (defined in ompi/mca/rte/rte.h) that simply cycles across opal_progress until the provided flag becomes false. Places where the MPI layer blocked waiting for RTE to complete an event have been modified to use this macro. *************************************************************************************** I am reissuing this RFC because of the time that has passed since its original release. Since its initial release and review, I have debugged it further to ensure it fully supports tests like loop_spawn. It therefore seems ready for merge back to the trunk. Given its prior review, I have set the timeout for one week. The code is in https://bitbucket.org/rhc/ompi-oob2 WHAT: Rewrite of ORTE OOB WHY: Support asynchronous progress and a host of other features WHEN: Wed, August 21 SYNOPSIS: The current OOB has served us well, but a number of limitations have been identified over the years. Specifically: * it is only progressed when called via opal_progress, which can lead to hangs or recursive calls into libevent (which is not supported by that code) * we've had issues when multiple NICs are available as the code doesn't "shift" messages between transports - thus, all nodes had to be available via the same TCP interface. * the OOB "unloads" incoming opal_buffer_t objects during the transmission, thus preventing use of OBJ_RETAIN in the code when repeatedly sending the same message to multiple recipients * there is no failover mechanism across NICs - if the selected NIC (or its attached switch) fails, we are forced to abort * only one transport (i.e., component) can be "active" The revised OOB resolves these problems: * async progress is used for all application processes, with the progress thread blocking in the event library * each available TCP NIC is supported by its own TCP module. The ability to asynchronously progress each module independently is provided, but not enabled by default (a runtime MCA parameter turns it "on") * multi-address TCP NICs (e.g., a NIC with both an IPv4 and IPv6 address, or with virtual interfaces) are supported - reachability is determined by comparing the contact info for a peer against all addresses within the range covered by the address/mask pairs for the NIC. * a message that arrives on one TCP NIC is automatically shifted to whatever NIC that is connected to the next "hop" if that peer cannot be reached by the incoming NIC. If no TCP module will reach the peer, then the OOB attempts to send the message via all other available components - if none can reach the peer, then an "error" is reported back to the RML, which then calls the errmgr for instructions. * opal_buffer_t now conforms to standard object rules re OBJ_RETAIN as we no longer "unload" the incoming object * NIC failure is reported to the TCP component, which then tries to resend the message across any other available TCP NIC. If that doesn't work, then the message is given back to the OOB base to try using other components. If all that fails, then the error is reported to the RML, which reports to the errmgr for instructions * obviously from the above, multiple OOB components (e.g., TCP and UD) can be active in parallel * the matching code has been moved to the RML (and out of the OOB/TCP component) so it is independent of transport * routing is done by the individual OOB modules (as opposed to the RML). Thus, both routed and non-routed transports can simultaneously be active * all blocking send/recv APIs have been removed. Everything operates asynchronously. KNOWN LIMITATIONS: * although provision is made for component failover as described above, the code for doing so has not been fully implemented yet. At the moment, if all connections for a given peer fail, the errmgr is notified of a "lost connection", which by default results in termination of the job if it was a lifeline * the IPv6 code is present and compiles, but is not complete. Since the current IPv6 support in the OOB doesn't work anyway, I don't consider this a blocker * routing is performed at the individual module level, yet the active routed component is selected on a global basis. We probably should update that to reflect that different transports may need/choose to route in different ways * obviously, not every error path has been tested nor necessarily covered * determining abnormal termination is more challenging than in the old code as we now potentially have multiple ways of connecting to a process. Ideally, we would declare "connection failed" when *all* transports can no longer reach the process, but that requires some additional (possibly complex) code. For now, the code replicates the old behavior only somewhat modified - i.e., if a module sees its connection fail, it checks to see if it is a lifeline. If so, it notifies the errmgr that the lifeline is lost - otherwise, it notifies the errmgr that a non-lifeline connection was lost. * reachability is determined solely on the basis of a shared subnet address/mask - more sophisticated algorithms (e.g., the one used in the tcp btl) are required to handle routing via gateways * the RML needs to assign sequence numbers to each message on a per-peer basis. The receiving RML will then deliver messages in order, thus preventing out-of-order messaging in the case where messages travel across different transports or a message needs to be redirected/resent due to failure of a NIC This commit was SVN r29058.
2013-08-22 20:37:40 +04:00
if (0 != getaddrinfo(name, NULL, &hint, &res)) {
/* the input wasn't a recognizable address */
return false;
}
As per the RFC, bring in the ORTE async progress code and the rewrite of OOB: *** THIS RFC INCLUDES A MINOR CHANGE TO THE MPI-RTE INTERFACE *** Note: during the course of this work, it was necessary to completely separate the MPI and RTE progress engines. There were multiple places in the MPI layer where ORTE_WAIT_FOR_COMPLETION was being used. A new OMPI_WAIT_FOR_COMPLETION macro was created (defined in ompi/mca/rte/rte.h) that simply cycles across opal_progress until the provided flag becomes false. Places where the MPI layer blocked waiting for RTE to complete an event have been modified to use this macro. *************************************************************************************** I am reissuing this RFC because of the time that has passed since its original release. Since its initial release and review, I have debugged it further to ensure it fully supports tests like loop_spawn. It therefore seems ready for merge back to the trunk. Given its prior review, I have set the timeout for one week. The code is in https://bitbucket.org/rhc/ompi-oob2 WHAT: Rewrite of ORTE OOB WHY: Support asynchronous progress and a host of other features WHEN: Wed, August 21 SYNOPSIS: The current OOB has served us well, but a number of limitations have been identified over the years. Specifically: * it is only progressed when called via opal_progress, which can lead to hangs or recursive calls into libevent (which is not supported by that code) * we've had issues when multiple NICs are available as the code doesn't "shift" messages between transports - thus, all nodes had to be available via the same TCP interface. * the OOB "unloads" incoming opal_buffer_t objects during the transmission, thus preventing use of OBJ_RETAIN in the code when repeatedly sending the same message to multiple recipients * there is no failover mechanism across NICs - if the selected NIC (or its attached switch) fails, we are forced to abort * only one transport (i.e., component) can be "active" The revised OOB resolves these problems: * async progress is used for all application processes, with the progress thread blocking in the event library * each available TCP NIC is supported by its own TCP module. The ability to asynchronously progress each module independently is provided, but not enabled by default (a runtime MCA parameter turns it "on") * multi-address TCP NICs (e.g., a NIC with both an IPv4 and IPv6 address, or with virtual interfaces) are supported - reachability is determined by comparing the contact info for a peer against all addresses within the range covered by the address/mask pairs for the NIC. * a message that arrives on one TCP NIC is automatically shifted to whatever NIC that is connected to the next "hop" if that peer cannot be reached by the incoming NIC. If no TCP module will reach the peer, then the OOB attempts to send the message via all other available components - if none can reach the peer, then an "error" is reported back to the RML, which then calls the errmgr for instructions. * opal_buffer_t now conforms to standard object rules re OBJ_RETAIN as we no longer "unload" the incoming object * NIC failure is reported to the TCP component, which then tries to resend the message across any other available TCP NIC. If that doesn't work, then the message is given back to the OOB base to try using other components. If all that fails, then the error is reported to the RML, which reports to the errmgr for instructions * obviously from the above, multiple OOB components (e.g., TCP and UD) can be active in parallel * the matching code has been moved to the RML (and out of the OOB/TCP component) so it is independent of transport * routing is done by the individual OOB modules (as opposed to the RML). Thus, both routed and non-routed transports can simultaneously be active * all blocking send/recv APIs have been removed. Everything operates asynchronously. KNOWN LIMITATIONS: * although provision is made for component failover as described above, the code for doing so has not been fully implemented yet. At the moment, if all connections for a given peer fail, the errmgr is notified of a "lost connection", which by default results in termination of the job if it was a lifeline * the IPv6 code is present and compiles, but is not complete. Since the current IPv6 support in the OOB doesn't work anyway, I don't consider this a blocker * routing is performed at the individual module level, yet the active routed component is selected on a global basis. We probably should update that to reflect that different transports may need/choose to route in different ways * obviously, not every error path has been tested nor necessarily covered * determining abnormal termination is more challenging than in the old code as we now potentially have multiple ways of connecting to a process. Ideally, we would declare "connection failed" when *all* transports can no longer reach the process, but that requires some additional (possibly complex) code. For now, the code replicates the old behavior only somewhat modified - i.e., if a module sees its connection fail, it checks to see if it is a lifeline. If so, it notifies the errmgr that the lifeline is lost - otherwise, it notifies the errmgr that a non-lifeline connection was lost. * reachability is determined solely on the basis of a shared subnet address/mask - more sophisticated algorithms (e.g., the one used in the tcp btl) are required to handle routing via gateways * the RML needs to assign sequence numbers to each message on a per-peer basis. The receiving RML will then deliver messages in order, thus preventing out-of-order messaging in the case where messages travel across different transports or a message needs to be redirected/resent due to failure of a NIC This commit was SVN r29058.
2013-08-22 20:37:40 +04:00
/* we don't care what family - all we care is that
* it is indeed an address
*/
freeaddrinfo(res);
return true;
}
#ifdef HAVE_STRUCT_SOCKADDR_IN
typedef struct private_ipv4_t {
in_addr_t addr;
uint32_t netmask_bits;
} private_ipv4_t;
static private_ipv4_t* private_ipv4 = NULL;
As per the RFC, bring in the ORTE async progress code and the rewrite of OOB: *** THIS RFC INCLUDES A MINOR CHANGE TO THE MPI-RTE INTERFACE *** Note: during the course of this work, it was necessary to completely separate the MPI and RTE progress engines. There were multiple places in the MPI layer where ORTE_WAIT_FOR_COMPLETION was being used. A new OMPI_WAIT_FOR_COMPLETION macro was created (defined in ompi/mca/rte/rte.h) that simply cycles across opal_progress until the provided flag becomes false. Places where the MPI layer blocked waiting for RTE to complete an event have been modified to use this macro. *************************************************************************************** I am reissuing this RFC because of the time that has passed since its original release. Since its initial release and review, I have debugged it further to ensure it fully supports tests like loop_spawn. It therefore seems ready for merge back to the trunk. Given its prior review, I have set the timeout for one week. The code is in https://bitbucket.org/rhc/ompi-oob2 WHAT: Rewrite of ORTE OOB WHY: Support asynchronous progress and a host of other features WHEN: Wed, August 21 SYNOPSIS: The current OOB has served us well, but a number of limitations have been identified over the years. Specifically: * it is only progressed when called via opal_progress, which can lead to hangs or recursive calls into libevent (which is not supported by that code) * we've had issues when multiple NICs are available as the code doesn't "shift" messages between transports - thus, all nodes had to be available via the same TCP interface. * the OOB "unloads" incoming opal_buffer_t objects during the transmission, thus preventing use of OBJ_RETAIN in the code when repeatedly sending the same message to multiple recipients * there is no failover mechanism across NICs - if the selected NIC (or its attached switch) fails, we are forced to abort * only one transport (i.e., component) can be "active" The revised OOB resolves these problems: * async progress is used for all application processes, with the progress thread blocking in the event library * each available TCP NIC is supported by its own TCP module. The ability to asynchronously progress each module independently is provided, but not enabled by default (a runtime MCA parameter turns it "on") * multi-address TCP NICs (e.g., a NIC with both an IPv4 and IPv6 address, or with virtual interfaces) are supported - reachability is determined by comparing the contact info for a peer against all addresses within the range covered by the address/mask pairs for the NIC. * a message that arrives on one TCP NIC is automatically shifted to whatever NIC that is connected to the next "hop" if that peer cannot be reached by the incoming NIC. If no TCP module will reach the peer, then the OOB attempts to send the message via all other available components - if none can reach the peer, then an "error" is reported back to the RML, which then calls the errmgr for instructions. * opal_buffer_t now conforms to standard object rules re OBJ_RETAIN as we no longer "unload" the incoming object * NIC failure is reported to the TCP component, which then tries to resend the message across any other available TCP NIC. If that doesn't work, then the message is given back to the OOB base to try using other components. If all that fails, then the error is reported to the RML, which reports to the errmgr for instructions * obviously from the above, multiple OOB components (e.g., TCP and UD) can be active in parallel * the matching code has been moved to the RML (and out of the OOB/TCP component) so it is independent of transport * routing is done by the individual OOB modules (as opposed to the RML). Thus, both routed and non-routed transports can simultaneously be active * all blocking send/recv APIs have been removed. Everything operates asynchronously. KNOWN LIMITATIONS: * although provision is made for component failover as described above, the code for doing so has not been fully implemented yet. At the moment, if all connections for a given peer fail, the errmgr is notified of a "lost connection", which by default results in termination of the job if it was a lifeline * the IPv6 code is present and compiles, but is not complete. Since the current IPv6 support in the OOB doesn't work anyway, I don't consider this a blocker * routing is performed at the individual module level, yet the active routed component is selected on a global basis. We probably should update that to reflect that different transports may need/choose to route in different ways * obviously, not every error path has been tested nor necessarily covered * determining abnormal termination is more challenging than in the old code as we now potentially have multiple ways of connecting to a process. Ideally, we would declare "connection failed" when *all* transports can no longer reach the process, but that requires some additional (possibly complex) code. For now, the code replicates the old behavior only somewhat modified - i.e., if a module sees its connection fail, it checks to see if it is a lifeline. If so, it notifies the errmgr that the lifeline is lost - otherwise, it notifies the errmgr that a non-lifeline connection was lost. * reachability is determined solely on the basis of a shared subnet address/mask - more sophisticated algorithms (e.g., the one used in the tcp btl) are required to handle routing via gateways * the RML needs to assign sequence numbers to each message on a per-peer basis. The receiving RML will then deliver messages in order, thus preventing out-of-order messaging in the case where messages travel across different transports or a message needs to be redirected/resent due to failure of a NIC This commit was SVN r29058.
2013-08-22 20:37:40 +04:00
#if OPAL_ENABLE_IPV6
static opal_tsd_key_t hostname_tsd_key;
static void
hostname_cleanup(void *value)
{
if (NULL != value) free(value);
}
static char*
get_hostname_buffer(void)
{
void *buffer;
int ret;
ret = opal_tsd_getspecific(hostname_tsd_key, &buffer);
if (OPAL_SUCCESS != ret) return NULL;
if (NULL == buffer) {
buffer = (void*) malloc((NI_MAXHOST + 1) * sizeof(char));
ret = opal_tsd_setspecific(hostname_tsd_key, buffer);
}
return (char*) buffer;
}
#endif
int
opal_net_init(void)
{
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-28 01:09:41 +04:00
char **args, *arg;
uint32_t a, b, c, d, bits, addr;
int i, count, found_bad = 0;
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-28 01:09:41 +04:00
args = opal_argv_split( opal_net_private_ipv4, ';' );
if( NULL != args ) {
count = opal_argv_count(args);
private_ipv4 = (private_ipv4_t*)malloc( (count + 1) * sizeof(private_ipv4_t));
if( NULL == private_ipv4 ) {
opal_output(0, "Unable to allocate memory for the private addresses array" );
opal_argv_free(args);
goto do_local_init;
}
for( i = 0; i < count; i++ ) {
arg = args[i];
2015-08-30 07:19:27 +03:00
(void)sscanf( arg, "%u.%u.%u.%u/%u", &a, &b, &c, &d, &bits );
if( (a > 255) || (b > 255) || (c > 255) ||
(d > 255) || (bits > 32) ) {
if (0 == found_bad) {
2015-06-24 06:59:57 +03:00
opal_show_help("help-opal-util.txt",
"malformed net_private_ipv4",
true, args[i]);
found_bad = 1;
}
continue;
}
addr = (a << 24) | (b << 16) | (c << 8) | d;
private_ipv4[i].addr = htonl(addr);
private_ipv4[i].netmask_bits = bits;
}
private_ipv4[i].addr = 0;
private_ipv4[i].netmask_bits = 0;
opal_argv_free(args);
}
do_local_init:
As per the RFC, bring in the ORTE async progress code and the rewrite of OOB: *** THIS RFC INCLUDES A MINOR CHANGE TO THE MPI-RTE INTERFACE *** Note: during the course of this work, it was necessary to completely separate the MPI and RTE progress engines. There were multiple places in the MPI layer where ORTE_WAIT_FOR_COMPLETION was being used. A new OMPI_WAIT_FOR_COMPLETION macro was created (defined in ompi/mca/rte/rte.h) that simply cycles across opal_progress until the provided flag becomes false. Places where the MPI layer blocked waiting for RTE to complete an event have been modified to use this macro. *************************************************************************************** I am reissuing this RFC because of the time that has passed since its original release. Since its initial release and review, I have debugged it further to ensure it fully supports tests like loop_spawn. It therefore seems ready for merge back to the trunk. Given its prior review, I have set the timeout for one week. The code is in https://bitbucket.org/rhc/ompi-oob2 WHAT: Rewrite of ORTE OOB WHY: Support asynchronous progress and a host of other features WHEN: Wed, August 21 SYNOPSIS: The current OOB has served us well, but a number of limitations have been identified over the years. Specifically: * it is only progressed when called via opal_progress, which can lead to hangs or recursive calls into libevent (which is not supported by that code) * we've had issues when multiple NICs are available as the code doesn't "shift" messages between transports - thus, all nodes had to be available via the same TCP interface. * the OOB "unloads" incoming opal_buffer_t objects during the transmission, thus preventing use of OBJ_RETAIN in the code when repeatedly sending the same message to multiple recipients * there is no failover mechanism across NICs - if the selected NIC (or its attached switch) fails, we are forced to abort * only one transport (i.e., component) can be "active" The revised OOB resolves these problems: * async progress is used for all application processes, with the progress thread blocking in the event library * each available TCP NIC is supported by its own TCP module. The ability to asynchronously progress each module independently is provided, but not enabled by default (a runtime MCA parameter turns it "on") * multi-address TCP NICs (e.g., a NIC with both an IPv4 and IPv6 address, or with virtual interfaces) are supported - reachability is determined by comparing the contact info for a peer against all addresses within the range covered by the address/mask pairs for the NIC. * a message that arrives on one TCP NIC is automatically shifted to whatever NIC that is connected to the next "hop" if that peer cannot be reached by the incoming NIC. If no TCP module will reach the peer, then the OOB attempts to send the message via all other available components - if none can reach the peer, then an "error" is reported back to the RML, which then calls the errmgr for instructions. * opal_buffer_t now conforms to standard object rules re OBJ_RETAIN as we no longer "unload" the incoming object * NIC failure is reported to the TCP component, which then tries to resend the message across any other available TCP NIC. If that doesn't work, then the message is given back to the OOB base to try using other components. If all that fails, then the error is reported to the RML, which reports to the errmgr for instructions * obviously from the above, multiple OOB components (e.g., TCP and UD) can be active in parallel * the matching code has been moved to the RML (and out of the OOB/TCP component) so it is independent of transport * routing is done by the individual OOB modules (as opposed to the RML). Thus, both routed and non-routed transports can simultaneously be active * all blocking send/recv APIs have been removed. Everything operates asynchronously. KNOWN LIMITATIONS: * although provision is made for component failover as described above, the code for doing so has not been fully implemented yet. At the moment, if all connections for a given peer fail, the errmgr is notified of a "lost connection", which by default results in termination of the job if it was a lifeline * the IPv6 code is present and compiles, but is not complete. Since the current IPv6 support in the OOB doesn't work anyway, I don't consider this a blocker * routing is performed at the individual module level, yet the active routed component is selected on a global basis. We probably should update that to reflect that different transports may need/choose to route in different ways * obviously, not every error path has been tested nor necessarily covered * determining abnormal termination is more challenging than in the old code as we now potentially have multiple ways of connecting to a process. Ideally, we would declare "connection failed" when *all* transports can no longer reach the process, but that requires some additional (possibly complex) code. For now, the code replicates the old behavior only somewhat modified - i.e., if a module sees its connection fail, it checks to see if it is a lifeline. If so, it notifies the errmgr that the lifeline is lost - otherwise, it notifies the errmgr that a non-lifeline connection was lost. * reachability is determined solely on the basis of a shared subnet address/mask - more sophisticated algorithms (e.g., the one used in the tcp btl) are required to handle routing via gateways * the RML needs to assign sequence numbers to each message on a per-peer basis. The receiving RML will then deliver messages in order, thus preventing out-of-order messaging in the case where messages travel across different transports or a message needs to be redirected/resent due to failure of a NIC This commit was SVN r29058.
2013-08-22 20:37:40 +04:00
#if OPAL_ENABLE_IPV6
return opal_tsd_key_create(&hostname_tsd_key, hostname_cleanup);
#else
return OPAL_SUCCESS;
#endif
}
int
opal_net_finalize()
{
free(private_ipv4);
private_ipv4 = NULL;
return OPAL_SUCCESS;
}
/* convert a CIDR prefixlen to netmask (in network byte order) */
uint32_t
opal_net_prefix2netmask(uint32_t prefixlen)
{
return htonl (((1 << prefixlen) - 1) << (32 - prefixlen));
}
bool
opal_net_islocalhost(const struct sockaddr *addr)
{
switch (addr->sa_family) {
case AF_INET:
{
const struct sockaddr_in *inaddr = (struct sockaddr_in*) addr;
/* if it's in the 127. domain, it shouldn't be routed
(0x7f == 127) */
if (0x7F000000 == (0x7F000000 & ntohl(inaddr->sin_addr.s_addr))) {
return true;
}
return false;
}
break;
As per the RFC, bring in the ORTE async progress code and the rewrite of OOB: *** THIS RFC INCLUDES A MINOR CHANGE TO THE MPI-RTE INTERFACE *** Note: during the course of this work, it was necessary to completely separate the MPI and RTE progress engines. There were multiple places in the MPI layer where ORTE_WAIT_FOR_COMPLETION was being used. A new OMPI_WAIT_FOR_COMPLETION macro was created (defined in ompi/mca/rte/rte.h) that simply cycles across opal_progress until the provided flag becomes false. Places where the MPI layer blocked waiting for RTE to complete an event have been modified to use this macro. *************************************************************************************** I am reissuing this RFC because of the time that has passed since its original release. Since its initial release and review, I have debugged it further to ensure it fully supports tests like loop_spawn. It therefore seems ready for merge back to the trunk. Given its prior review, I have set the timeout for one week. The code is in https://bitbucket.org/rhc/ompi-oob2 WHAT: Rewrite of ORTE OOB WHY: Support asynchronous progress and a host of other features WHEN: Wed, August 21 SYNOPSIS: The current OOB has served us well, but a number of limitations have been identified over the years. Specifically: * it is only progressed when called via opal_progress, which can lead to hangs or recursive calls into libevent (which is not supported by that code) * we've had issues when multiple NICs are available as the code doesn't "shift" messages between transports - thus, all nodes had to be available via the same TCP interface. * the OOB "unloads" incoming opal_buffer_t objects during the transmission, thus preventing use of OBJ_RETAIN in the code when repeatedly sending the same message to multiple recipients * there is no failover mechanism across NICs - if the selected NIC (or its attached switch) fails, we are forced to abort * only one transport (i.e., component) can be "active" The revised OOB resolves these problems: * async progress is used for all application processes, with the progress thread blocking in the event library * each available TCP NIC is supported by its own TCP module. The ability to asynchronously progress each module independently is provided, but not enabled by default (a runtime MCA parameter turns it "on") * multi-address TCP NICs (e.g., a NIC with both an IPv4 and IPv6 address, or with virtual interfaces) are supported - reachability is determined by comparing the contact info for a peer against all addresses within the range covered by the address/mask pairs for the NIC. * a message that arrives on one TCP NIC is automatically shifted to whatever NIC that is connected to the next "hop" if that peer cannot be reached by the incoming NIC. If no TCP module will reach the peer, then the OOB attempts to send the message via all other available components - if none can reach the peer, then an "error" is reported back to the RML, which then calls the errmgr for instructions. * opal_buffer_t now conforms to standard object rules re OBJ_RETAIN as we no longer "unload" the incoming object * NIC failure is reported to the TCP component, which then tries to resend the message across any other available TCP NIC. If that doesn't work, then the message is given back to the OOB base to try using other components. If all that fails, then the error is reported to the RML, which reports to the errmgr for instructions * obviously from the above, multiple OOB components (e.g., TCP and UD) can be active in parallel * the matching code has been moved to the RML (and out of the OOB/TCP component) so it is independent of transport * routing is done by the individual OOB modules (as opposed to the RML). Thus, both routed and non-routed transports can simultaneously be active * all blocking send/recv APIs have been removed. Everything operates asynchronously. KNOWN LIMITATIONS: * although provision is made for component failover as described above, the code for doing so has not been fully implemented yet. At the moment, if all connections for a given peer fail, the errmgr is notified of a "lost connection", which by default results in termination of the job if it was a lifeline * the IPv6 code is present and compiles, but is not complete. Since the current IPv6 support in the OOB doesn't work anyway, I don't consider this a blocker * routing is performed at the individual module level, yet the active routed component is selected on a global basis. We probably should update that to reflect that different transports may need/choose to route in different ways * obviously, not every error path has been tested nor necessarily covered * determining abnormal termination is more challenging than in the old code as we now potentially have multiple ways of connecting to a process. Ideally, we would declare "connection failed" when *all* transports can no longer reach the process, but that requires some additional (possibly complex) code. For now, the code replicates the old behavior only somewhat modified - i.e., if a module sees its connection fail, it checks to see if it is a lifeline. If so, it notifies the errmgr that the lifeline is lost - otherwise, it notifies the errmgr that a non-lifeline connection was lost. * reachability is determined solely on the basis of a shared subnet address/mask - more sophisticated algorithms (e.g., the one used in the tcp btl) are required to handle routing via gateways * the RML needs to assign sequence numbers to each message on a per-peer basis. The receiving RML will then deliver messages in order, thus preventing out-of-order messaging in the case where messages travel across different transports or a message needs to be redirected/resent due to failure of a NIC This commit was SVN r29058.
2013-08-22 20:37:40 +04:00
#if OPAL_ENABLE_IPV6
case AF_INET6:
{
const struct sockaddr_in6 *inaddr = (struct sockaddr_in6*) addr;
if (IN6_IS_ADDR_LOOPBACK (&inaddr->sin6_addr)) {
return true; /* Bug, FIXME: check for 127.0.0.1/8 */
}
return false;
}
break;
#endif
default:
opal_output(0, "unhandled sa_family %d passed to opal_net_islocalhost",
addr->sa_family);
return false;
break;
}
}
bool
2015-06-24 06:59:57 +03:00
opal_net_samenetwork(const struct sockaddr *addr1,
const struct sockaddr *addr2,
uint32_t plen)
{
uint32_t prefixlen;
if(addr1->sa_family != addr2->sa_family) {
return false; /* address families must be equal */
}
2015-06-24 06:59:57 +03:00
switch (addr1->sa_family) {
case AF_INET:
{
if (0 == plen) {
prefixlen = 32;
} else {
prefixlen = plen;
}
struct sockaddr_in inaddr1, inaddr2;
/* Use temporary variables and memcpy's so that we don't
run into bus errors on Solaris/SPARC */
memcpy(&inaddr1, addr1, sizeof(inaddr1));
memcpy(&inaddr2, addr2, sizeof(inaddr2));
uint32_t netmask = opal_net_prefix2netmask (prefixlen);
if((inaddr1.sin_addr.s_addr & netmask) ==
(inaddr2.sin_addr.s_addr & netmask)) {
return true;
}
return false;
}
break;
As per the RFC, bring in the ORTE async progress code and the rewrite of OOB: *** THIS RFC INCLUDES A MINOR CHANGE TO THE MPI-RTE INTERFACE *** Note: during the course of this work, it was necessary to completely separate the MPI and RTE progress engines. There were multiple places in the MPI layer where ORTE_WAIT_FOR_COMPLETION was being used. A new OMPI_WAIT_FOR_COMPLETION macro was created (defined in ompi/mca/rte/rte.h) that simply cycles across opal_progress until the provided flag becomes false. Places where the MPI layer blocked waiting for RTE to complete an event have been modified to use this macro. *************************************************************************************** I am reissuing this RFC because of the time that has passed since its original release. Since its initial release and review, I have debugged it further to ensure it fully supports tests like loop_spawn. It therefore seems ready for merge back to the trunk. Given its prior review, I have set the timeout for one week. The code is in https://bitbucket.org/rhc/ompi-oob2 WHAT: Rewrite of ORTE OOB WHY: Support asynchronous progress and a host of other features WHEN: Wed, August 21 SYNOPSIS: The current OOB has served us well, but a number of limitations have been identified over the years. Specifically: * it is only progressed when called via opal_progress, which can lead to hangs or recursive calls into libevent (which is not supported by that code) * we've had issues when multiple NICs are available as the code doesn't "shift" messages between transports - thus, all nodes had to be available via the same TCP interface. * the OOB "unloads" incoming opal_buffer_t objects during the transmission, thus preventing use of OBJ_RETAIN in the code when repeatedly sending the same message to multiple recipients * there is no failover mechanism across NICs - if the selected NIC (or its attached switch) fails, we are forced to abort * only one transport (i.e., component) can be "active" The revised OOB resolves these problems: * async progress is used for all application processes, with the progress thread blocking in the event library * each available TCP NIC is supported by its own TCP module. The ability to asynchronously progress each module independently is provided, but not enabled by default (a runtime MCA parameter turns it "on") * multi-address TCP NICs (e.g., a NIC with both an IPv4 and IPv6 address, or with virtual interfaces) are supported - reachability is determined by comparing the contact info for a peer against all addresses within the range covered by the address/mask pairs for the NIC. * a message that arrives on one TCP NIC is automatically shifted to whatever NIC that is connected to the next "hop" if that peer cannot be reached by the incoming NIC. If no TCP module will reach the peer, then the OOB attempts to send the message via all other available components - if none can reach the peer, then an "error" is reported back to the RML, which then calls the errmgr for instructions. * opal_buffer_t now conforms to standard object rules re OBJ_RETAIN as we no longer "unload" the incoming object * NIC failure is reported to the TCP component, which then tries to resend the message across any other available TCP NIC. If that doesn't work, then the message is given back to the OOB base to try using other components. If all that fails, then the error is reported to the RML, which reports to the errmgr for instructions * obviously from the above, multiple OOB components (e.g., TCP and UD) can be active in parallel * the matching code has been moved to the RML (and out of the OOB/TCP component) so it is independent of transport * routing is done by the individual OOB modules (as opposed to the RML). Thus, both routed and non-routed transports can simultaneously be active * all blocking send/recv APIs have been removed. Everything operates asynchronously. KNOWN LIMITATIONS: * although provision is made for component failover as described above, the code for doing so has not been fully implemented yet. At the moment, if all connections for a given peer fail, the errmgr is notified of a "lost connection", which by default results in termination of the job if it was a lifeline * the IPv6 code is present and compiles, but is not complete. Since the current IPv6 support in the OOB doesn't work anyway, I don't consider this a blocker * routing is performed at the individual module level, yet the active routed component is selected on a global basis. We probably should update that to reflect that different transports may need/choose to route in different ways * obviously, not every error path has been tested nor necessarily covered * determining abnormal termination is more challenging than in the old code as we now potentially have multiple ways of connecting to a process. Ideally, we would declare "connection failed" when *all* transports can no longer reach the process, but that requires some additional (possibly complex) code. For now, the code replicates the old behavior only somewhat modified - i.e., if a module sees its connection fail, it checks to see if it is a lifeline. If so, it notifies the errmgr that the lifeline is lost - otherwise, it notifies the errmgr that a non-lifeline connection was lost. * reachability is determined solely on the basis of a shared subnet address/mask - more sophisticated algorithms (e.g., the one used in the tcp btl) are required to handle routing via gateways * the RML needs to assign sequence numbers to each message on a per-peer basis. The receiving RML will then deliver messages in order, thus preventing out-of-order messaging in the case where messages travel across different transports or a message needs to be redirected/resent due to failure of a NIC This commit was SVN r29058.
2013-08-22 20:37:40 +04:00
#if OPAL_ENABLE_IPV6
case AF_INET6:
{
struct sockaddr_in6 inaddr1, inaddr2;
/* Use temporary variables and memcpy's so that we don't
run into bus errors on Solaris/SPARC */
memcpy(&inaddr1, addr1, sizeof(inaddr1));
memcpy(&inaddr2, addr2, sizeof(inaddr2));
struct in6_addr *a6_1 = (struct in6_addr*) &inaddr1.sin6_addr;
struct in6_addr *a6_2 = (struct in6_addr*) &inaddr2.sin6_addr;
if (0 == plen) {
prefixlen = 64;
} else {
prefixlen = plen;
}
As per the RFC, bring in the ORTE async progress code and the rewrite of OOB: *** THIS RFC INCLUDES A MINOR CHANGE TO THE MPI-RTE INTERFACE *** Note: during the course of this work, it was necessary to completely separate the MPI and RTE progress engines. There were multiple places in the MPI layer where ORTE_WAIT_FOR_COMPLETION was being used. A new OMPI_WAIT_FOR_COMPLETION macro was created (defined in ompi/mca/rte/rte.h) that simply cycles across opal_progress until the provided flag becomes false. Places where the MPI layer blocked waiting for RTE to complete an event have been modified to use this macro. *************************************************************************************** I am reissuing this RFC because of the time that has passed since its original release. Since its initial release and review, I have debugged it further to ensure it fully supports tests like loop_spawn. It therefore seems ready for merge back to the trunk. Given its prior review, I have set the timeout for one week. The code is in https://bitbucket.org/rhc/ompi-oob2 WHAT: Rewrite of ORTE OOB WHY: Support asynchronous progress and a host of other features WHEN: Wed, August 21 SYNOPSIS: The current OOB has served us well, but a number of limitations have been identified over the years. Specifically: * it is only progressed when called via opal_progress, which can lead to hangs or recursive calls into libevent (which is not supported by that code) * we've had issues when multiple NICs are available as the code doesn't "shift" messages between transports - thus, all nodes had to be available via the same TCP interface. * the OOB "unloads" incoming opal_buffer_t objects during the transmission, thus preventing use of OBJ_RETAIN in the code when repeatedly sending the same message to multiple recipients * there is no failover mechanism across NICs - if the selected NIC (or its attached switch) fails, we are forced to abort * only one transport (i.e., component) can be "active" The revised OOB resolves these problems: * async progress is used for all application processes, with the progress thread blocking in the event library * each available TCP NIC is supported by its own TCP module. The ability to asynchronously progress each module independently is provided, but not enabled by default (a runtime MCA parameter turns it "on") * multi-address TCP NICs (e.g., a NIC with both an IPv4 and IPv6 address, or with virtual interfaces) are supported - reachability is determined by comparing the contact info for a peer against all addresses within the range covered by the address/mask pairs for the NIC. * a message that arrives on one TCP NIC is automatically shifted to whatever NIC that is connected to the next "hop" if that peer cannot be reached by the incoming NIC. If no TCP module will reach the peer, then the OOB attempts to send the message via all other available components - if none can reach the peer, then an "error" is reported back to the RML, which then calls the errmgr for instructions. * opal_buffer_t now conforms to standard object rules re OBJ_RETAIN as we no longer "unload" the incoming object * NIC failure is reported to the TCP component, which then tries to resend the message across any other available TCP NIC. If that doesn't work, then the message is given back to the OOB base to try using other components. If all that fails, then the error is reported to the RML, which reports to the errmgr for instructions * obviously from the above, multiple OOB components (e.g., TCP and UD) can be active in parallel * the matching code has been moved to the RML (and out of the OOB/TCP component) so it is independent of transport * routing is done by the individual OOB modules (as opposed to the RML). Thus, both routed and non-routed transports can simultaneously be active * all blocking send/recv APIs have been removed. Everything operates asynchronously. KNOWN LIMITATIONS: * although provision is made for component failover as described above, the code for doing so has not been fully implemented yet. At the moment, if all connections for a given peer fail, the errmgr is notified of a "lost connection", which by default results in termination of the job if it was a lifeline * the IPv6 code is present and compiles, but is not complete. Since the current IPv6 support in the OOB doesn't work anyway, I don't consider this a blocker * routing is performed at the individual module level, yet the active routed component is selected on a global basis. We probably should update that to reflect that different transports may need/choose to route in different ways * obviously, not every error path has been tested nor necessarily covered * determining abnormal termination is more challenging than in the old code as we now potentially have multiple ways of connecting to a process. Ideally, we would declare "connection failed" when *all* transports can no longer reach the process, but that requires some additional (possibly complex) code. For now, the code replicates the old behavior only somewhat modified - i.e., if a module sees its connection fail, it checks to see if it is a lifeline. If so, it notifies the errmgr that the lifeline is lost - otherwise, it notifies the errmgr that a non-lifeline connection was lost. * reachability is determined solely on the basis of a shared subnet address/mask - more sophisticated algorithms (e.g., the one used in the tcp btl) are required to handle routing via gateways * the RML needs to assign sequence numbers to each message on a per-peer basis. The receiving RML will then deliver messages in order, thus preventing out-of-order messaging in the case where messages travel across different transports or a message needs to be redirected/resent due to failure of a NIC This commit was SVN r29058.
2013-08-22 20:37:40 +04:00
if (64 == prefixlen) {
/* prefixlen is always /64, any other case would be routing.
Compare the first eight bytes (64 bits) and hope that
endianess is not an issue on any system as long as
addresses are always stored in network byte order.
*/
if (((const uint32_t *) (a6_1))[0] ==
((const uint32_t *) (a6_2))[0] &&
((const uint32_t *) (a6_1))[1] ==
((const uint32_t *) (a6_2))[1]) {
return true;
}
}
return false;
}
break;
#endif
default:
opal_output(0, "unhandled sa_family %d passed to opal_samenetwork",
addr1->sa_family);
}
return false;
}
/**
* Returns true if the given address is a public IPv4 address.
*/
bool
opal_net_addr_isipv4public(const struct sockaddr *addr)
{
switch (addr->sa_family) {
As per the RFC, bring in the ORTE async progress code and the rewrite of OOB: *** THIS RFC INCLUDES A MINOR CHANGE TO THE MPI-RTE INTERFACE *** Note: during the course of this work, it was necessary to completely separate the MPI and RTE progress engines. There were multiple places in the MPI layer where ORTE_WAIT_FOR_COMPLETION was being used. A new OMPI_WAIT_FOR_COMPLETION macro was created (defined in ompi/mca/rte/rte.h) that simply cycles across opal_progress until the provided flag becomes false. Places where the MPI layer blocked waiting for RTE to complete an event have been modified to use this macro. *************************************************************************************** I am reissuing this RFC because of the time that has passed since its original release. Since its initial release and review, I have debugged it further to ensure it fully supports tests like loop_spawn. It therefore seems ready for merge back to the trunk. Given its prior review, I have set the timeout for one week. The code is in https://bitbucket.org/rhc/ompi-oob2 WHAT: Rewrite of ORTE OOB WHY: Support asynchronous progress and a host of other features WHEN: Wed, August 21 SYNOPSIS: The current OOB has served us well, but a number of limitations have been identified over the years. Specifically: * it is only progressed when called via opal_progress, which can lead to hangs or recursive calls into libevent (which is not supported by that code) * we've had issues when multiple NICs are available as the code doesn't "shift" messages between transports - thus, all nodes had to be available via the same TCP interface. * the OOB "unloads" incoming opal_buffer_t objects during the transmission, thus preventing use of OBJ_RETAIN in the code when repeatedly sending the same message to multiple recipients * there is no failover mechanism across NICs - if the selected NIC (or its attached switch) fails, we are forced to abort * only one transport (i.e., component) can be "active" The revised OOB resolves these problems: * async progress is used for all application processes, with the progress thread blocking in the event library * each available TCP NIC is supported by its own TCP module. The ability to asynchronously progress each module independently is provided, but not enabled by default (a runtime MCA parameter turns it "on") * multi-address TCP NICs (e.g., a NIC with both an IPv4 and IPv6 address, or with virtual interfaces) are supported - reachability is determined by comparing the contact info for a peer against all addresses within the range covered by the address/mask pairs for the NIC. * a message that arrives on one TCP NIC is automatically shifted to whatever NIC that is connected to the next "hop" if that peer cannot be reached by the incoming NIC. If no TCP module will reach the peer, then the OOB attempts to send the message via all other available components - if none can reach the peer, then an "error" is reported back to the RML, which then calls the errmgr for instructions. * opal_buffer_t now conforms to standard object rules re OBJ_RETAIN as we no longer "unload" the incoming object * NIC failure is reported to the TCP component, which then tries to resend the message across any other available TCP NIC. If that doesn't work, then the message is given back to the OOB base to try using other components. If all that fails, then the error is reported to the RML, which reports to the errmgr for instructions * obviously from the above, multiple OOB components (e.g., TCP and UD) can be active in parallel * the matching code has been moved to the RML (and out of the OOB/TCP component) so it is independent of transport * routing is done by the individual OOB modules (as opposed to the RML). Thus, both routed and non-routed transports can simultaneously be active * all blocking send/recv APIs have been removed. Everything operates asynchronously. KNOWN LIMITATIONS: * although provision is made for component failover as described above, the code for doing so has not been fully implemented yet. At the moment, if all connections for a given peer fail, the errmgr is notified of a "lost connection", which by default results in termination of the job if it was a lifeline * the IPv6 code is present and compiles, but is not complete. Since the current IPv6 support in the OOB doesn't work anyway, I don't consider this a blocker * routing is performed at the individual module level, yet the active routed component is selected on a global basis. We probably should update that to reflect that different transports may need/choose to route in different ways * obviously, not every error path has been tested nor necessarily covered * determining abnormal termination is more challenging than in the old code as we now potentially have multiple ways of connecting to a process. Ideally, we would declare "connection failed" when *all* transports can no longer reach the process, but that requires some additional (possibly complex) code. For now, the code replicates the old behavior only somewhat modified - i.e., if a module sees its connection fail, it checks to see if it is a lifeline. If so, it notifies the errmgr that the lifeline is lost - otherwise, it notifies the errmgr that a non-lifeline connection was lost. * reachability is determined solely on the basis of a shared subnet address/mask - more sophisticated algorithms (e.g., the one used in the tcp btl) are required to handle routing via gateways * the RML needs to assign sequence numbers to each message on a per-peer basis. The receiving RML will then deliver messages in order, thus preventing out-of-order messaging in the case where messages travel across different transports or a message needs to be redirected/resent due to failure of a NIC This commit was SVN r29058.
2013-08-22 20:37:40 +04:00
#if OPAL_ENABLE_IPV6
case AF_INET6:
return false;
#endif
case AF_INET:
{
const struct sockaddr_in *inaddr = (struct sockaddr_in*) addr;
int i;
2015-06-24 06:59:57 +03:00
if( NULL == private_ipv4 ) {
return true;
}
2015-06-24 06:59:57 +03:00
for( i = 0; private_ipv4[i].addr != 0; i++ ) {
if( private_ipv4[i].addr == (inaddr->sin_addr.s_addr &
opal_net_prefix2netmask(private_ipv4[i].netmask_bits)) )
return false;
}
2015-06-24 06:59:57 +03:00
}
return true;
default:
opal_output (0,
"unhandled sa_family %d passed to opal_net_addr_isipv4public\n",
addr->sa_family);
}
2015-06-24 06:59:57 +03:00
return false;
}
char*
opal_net_get_hostname(const struct sockaddr *addr)
{
As per the RFC, bring in the ORTE async progress code and the rewrite of OOB: *** THIS RFC INCLUDES A MINOR CHANGE TO THE MPI-RTE INTERFACE *** Note: during the course of this work, it was necessary to completely separate the MPI and RTE progress engines. There were multiple places in the MPI layer where ORTE_WAIT_FOR_COMPLETION was being used. A new OMPI_WAIT_FOR_COMPLETION macro was created (defined in ompi/mca/rte/rte.h) that simply cycles across opal_progress until the provided flag becomes false. Places where the MPI layer blocked waiting for RTE to complete an event have been modified to use this macro. *************************************************************************************** I am reissuing this RFC because of the time that has passed since its original release. Since its initial release and review, I have debugged it further to ensure it fully supports tests like loop_spawn. It therefore seems ready for merge back to the trunk. Given its prior review, I have set the timeout for one week. The code is in https://bitbucket.org/rhc/ompi-oob2 WHAT: Rewrite of ORTE OOB WHY: Support asynchronous progress and a host of other features WHEN: Wed, August 21 SYNOPSIS: The current OOB has served us well, but a number of limitations have been identified over the years. Specifically: * it is only progressed when called via opal_progress, which can lead to hangs or recursive calls into libevent (which is not supported by that code) * we've had issues when multiple NICs are available as the code doesn't "shift" messages between transports - thus, all nodes had to be available via the same TCP interface. * the OOB "unloads" incoming opal_buffer_t objects during the transmission, thus preventing use of OBJ_RETAIN in the code when repeatedly sending the same message to multiple recipients * there is no failover mechanism across NICs - if the selected NIC (or its attached switch) fails, we are forced to abort * only one transport (i.e., component) can be "active" The revised OOB resolves these problems: * async progress is used for all application processes, with the progress thread blocking in the event library * each available TCP NIC is supported by its own TCP module. The ability to asynchronously progress each module independently is provided, but not enabled by default (a runtime MCA parameter turns it "on") * multi-address TCP NICs (e.g., a NIC with both an IPv4 and IPv6 address, or with virtual interfaces) are supported - reachability is determined by comparing the contact info for a peer against all addresses within the range covered by the address/mask pairs for the NIC. * a message that arrives on one TCP NIC is automatically shifted to whatever NIC that is connected to the next "hop" if that peer cannot be reached by the incoming NIC. If no TCP module will reach the peer, then the OOB attempts to send the message via all other available components - if none can reach the peer, then an "error" is reported back to the RML, which then calls the errmgr for instructions. * opal_buffer_t now conforms to standard object rules re OBJ_RETAIN as we no longer "unload" the incoming object * NIC failure is reported to the TCP component, which then tries to resend the message across any other available TCP NIC. If that doesn't work, then the message is given back to the OOB base to try using other components. If all that fails, then the error is reported to the RML, which reports to the errmgr for instructions * obviously from the above, multiple OOB components (e.g., TCP and UD) can be active in parallel * the matching code has been moved to the RML (and out of the OOB/TCP component) so it is independent of transport * routing is done by the individual OOB modules (as opposed to the RML). Thus, both routed and non-routed transports can simultaneously be active * all blocking send/recv APIs have been removed. Everything operates asynchronously. KNOWN LIMITATIONS: * although provision is made for component failover as described above, the code for doing so has not been fully implemented yet. At the moment, if all connections for a given peer fail, the errmgr is notified of a "lost connection", which by default results in termination of the job if it was a lifeline * the IPv6 code is present and compiles, but is not complete. Since the current IPv6 support in the OOB doesn't work anyway, I don't consider this a blocker * routing is performed at the individual module level, yet the active routed component is selected on a global basis. We probably should update that to reflect that different transports may need/choose to route in different ways * obviously, not every error path has been tested nor necessarily covered * determining abnormal termination is more challenging than in the old code as we now potentially have multiple ways of connecting to a process. Ideally, we would declare "connection failed" when *all* transports can no longer reach the process, but that requires some additional (possibly complex) code. For now, the code replicates the old behavior only somewhat modified - i.e., if a module sees its connection fail, it checks to see if it is a lifeline. If so, it notifies the errmgr that the lifeline is lost - otherwise, it notifies the errmgr that a non-lifeline connection was lost. * reachability is determined solely on the basis of a shared subnet address/mask - more sophisticated algorithms (e.g., the one used in the tcp btl) are required to handle routing via gateways * the RML needs to assign sequence numbers to each message on a per-peer basis. The receiving RML will then deliver messages in order, thus preventing out-of-order messaging in the case where messages travel across different transports or a message needs to be redirected/resent due to failure of a NIC This commit was SVN r29058.
2013-08-22 20:37:40 +04:00
#if OPAL_ENABLE_IPV6
char *name = get_hostname_buffer();
int error;
socklen_t addrlen;
As per the RFC, bring in the ORTE async progress code and the rewrite of OOB: *** THIS RFC INCLUDES A MINOR CHANGE TO THE MPI-RTE INTERFACE *** Note: during the course of this work, it was necessary to completely separate the MPI and RTE progress engines. There were multiple places in the MPI layer where ORTE_WAIT_FOR_COMPLETION was being used. A new OMPI_WAIT_FOR_COMPLETION macro was created (defined in ompi/mca/rte/rte.h) that simply cycles across opal_progress until the provided flag becomes false. Places where the MPI layer blocked waiting for RTE to complete an event have been modified to use this macro. *************************************************************************************** I am reissuing this RFC because of the time that has passed since its original release. Since its initial release and review, I have debugged it further to ensure it fully supports tests like loop_spawn. It therefore seems ready for merge back to the trunk. Given its prior review, I have set the timeout for one week. The code is in https://bitbucket.org/rhc/ompi-oob2 WHAT: Rewrite of ORTE OOB WHY: Support asynchronous progress and a host of other features WHEN: Wed, August 21 SYNOPSIS: The current OOB has served us well, but a number of limitations have been identified over the years. Specifically: * it is only progressed when called via opal_progress, which can lead to hangs or recursive calls into libevent (which is not supported by that code) * we've had issues when multiple NICs are available as the code doesn't "shift" messages between transports - thus, all nodes had to be available via the same TCP interface. * the OOB "unloads" incoming opal_buffer_t objects during the transmission, thus preventing use of OBJ_RETAIN in the code when repeatedly sending the same message to multiple recipients * there is no failover mechanism across NICs - if the selected NIC (or its attached switch) fails, we are forced to abort * only one transport (i.e., component) can be "active" The revised OOB resolves these problems: * async progress is used for all application processes, with the progress thread blocking in the event library * each available TCP NIC is supported by its own TCP module. The ability to asynchronously progress each module independently is provided, but not enabled by default (a runtime MCA parameter turns it "on") * multi-address TCP NICs (e.g., a NIC with both an IPv4 and IPv6 address, or with virtual interfaces) are supported - reachability is determined by comparing the contact info for a peer against all addresses within the range covered by the address/mask pairs for the NIC. * a message that arrives on one TCP NIC is automatically shifted to whatever NIC that is connected to the next "hop" if that peer cannot be reached by the incoming NIC. If no TCP module will reach the peer, then the OOB attempts to send the message via all other available components - if none can reach the peer, then an "error" is reported back to the RML, which then calls the errmgr for instructions. * opal_buffer_t now conforms to standard object rules re OBJ_RETAIN as we no longer "unload" the incoming object * NIC failure is reported to the TCP component, which then tries to resend the message across any other available TCP NIC. If that doesn't work, then the message is given back to the OOB base to try using other components. If all that fails, then the error is reported to the RML, which reports to the errmgr for instructions * obviously from the above, multiple OOB components (e.g., TCP and UD) can be active in parallel * the matching code has been moved to the RML (and out of the OOB/TCP component) so it is independent of transport * routing is done by the individual OOB modules (as opposed to the RML). Thus, both routed and non-routed transports can simultaneously be active * all blocking send/recv APIs have been removed. Everything operates asynchronously. KNOWN LIMITATIONS: * although provision is made for component failover as described above, the code for doing so has not been fully implemented yet. At the moment, if all connections for a given peer fail, the errmgr is notified of a "lost connection", which by default results in termination of the job if it was a lifeline * the IPv6 code is present and compiles, but is not complete. Since the current IPv6 support in the OOB doesn't work anyway, I don't consider this a blocker * routing is performed at the individual module level, yet the active routed component is selected on a global basis. We probably should update that to reflect that different transports may need/choose to route in different ways * obviously, not every error path has been tested nor necessarily covered * determining abnormal termination is more challenging than in the old code as we now potentially have multiple ways of connecting to a process. Ideally, we would declare "connection failed" when *all* transports can no longer reach the process, but that requires some additional (possibly complex) code. For now, the code replicates the old behavior only somewhat modified - i.e., if a module sees its connection fail, it checks to see if it is a lifeline. If so, it notifies the errmgr that the lifeline is lost - otherwise, it notifies the errmgr that a non-lifeline connection was lost. * reachability is determined solely on the basis of a shared subnet address/mask - more sophisticated algorithms (e.g., the one used in the tcp btl) are required to handle routing via gateways * the RML needs to assign sequence numbers to each message on a per-peer basis. The receiving RML will then deliver messages in order, thus preventing out-of-order messaging in the case where messages travel across different transports or a message needs to be redirected/resent due to failure of a NIC This commit was SVN r29058.
2013-08-22 20:37:40 +04:00
char *p;
if (NULL == name) {
opal_output(0, "opal_sockaddr2str: malloc() failed\n");
return NULL;
}
OPAL_DEBUG_ZERO(*name);
switch (addr->sa_family) {
case AF_INET:
addrlen = sizeof (struct sockaddr_in);
break;
case AF_INET6:
2015-06-24 06:59:57 +03:00
#if defined( __NetBSD__)
/* hotfix for netbsd: on my netbsd machine, getnameinfo
returns an unkown error code. */
if(NULL == inet_ntop(AF_INET6, &((struct sockaddr_in6*) addr)->sin6_addr,
name, NI_MAXHOST)) {
opal_output(0, "opal_sockaddr2str failed with error code %d", errno);
free(name);
return NULL;
}
return name;
#else
addrlen = sizeof (struct sockaddr_in6);
#endif
break;
default:
free(name);
return NULL;
}
error = getnameinfo(addr, addrlen,
name, NI_MAXHOST, NULL, 0, NI_NUMERICHOST);
if (error) {
int err = errno;
opal_output (0, "opal_sockaddr2str failed:%s (return code %i)\n",
gai_strerror(err), error);
free (name);
return NULL;
}
As per the RFC, bring in the ORTE async progress code and the rewrite of OOB: *** THIS RFC INCLUDES A MINOR CHANGE TO THE MPI-RTE INTERFACE *** Note: during the course of this work, it was necessary to completely separate the MPI and RTE progress engines. There were multiple places in the MPI layer where ORTE_WAIT_FOR_COMPLETION was being used. A new OMPI_WAIT_FOR_COMPLETION macro was created (defined in ompi/mca/rte/rte.h) that simply cycles across opal_progress until the provided flag becomes false. Places where the MPI layer blocked waiting for RTE to complete an event have been modified to use this macro. *************************************************************************************** I am reissuing this RFC because of the time that has passed since its original release. Since its initial release and review, I have debugged it further to ensure it fully supports tests like loop_spawn. It therefore seems ready for merge back to the trunk. Given its prior review, I have set the timeout for one week. The code is in https://bitbucket.org/rhc/ompi-oob2 WHAT: Rewrite of ORTE OOB WHY: Support asynchronous progress and a host of other features WHEN: Wed, August 21 SYNOPSIS: The current OOB has served us well, but a number of limitations have been identified over the years. Specifically: * it is only progressed when called via opal_progress, which can lead to hangs or recursive calls into libevent (which is not supported by that code) * we've had issues when multiple NICs are available as the code doesn't "shift" messages between transports - thus, all nodes had to be available via the same TCP interface. * the OOB "unloads" incoming opal_buffer_t objects during the transmission, thus preventing use of OBJ_RETAIN in the code when repeatedly sending the same message to multiple recipients * there is no failover mechanism across NICs - if the selected NIC (or its attached switch) fails, we are forced to abort * only one transport (i.e., component) can be "active" The revised OOB resolves these problems: * async progress is used for all application processes, with the progress thread blocking in the event library * each available TCP NIC is supported by its own TCP module. The ability to asynchronously progress each module independently is provided, but not enabled by default (a runtime MCA parameter turns it "on") * multi-address TCP NICs (e.g., a NIC with both an IPv4 and IPv6 address, or with virtual interfaces) are supported - reachability is determined by comparing the contact info for a peer against all addresses within the range covered by the address/mask pairs for the NIC. * a message that arrives on one TCP NIC is automatically shifted to whatever NIC that is connected to the next "hop" if that peer cannot be reached by the incoming NIC. If no TCP module will reach the peer, then the OOB attempts to send the message via all other available components - if none can reach the peer, then an "error" is reported back to the RML, which then calls the errmgr for instructions. * opal_buffer_t now conforms to standard object rules re OBJ_RETAIN as we no longer "unload" the incoming object * NIC failure is reported to the TCP component, which then tries to resend the message across any other available TCP NIC. If that doesn't work, then the message is given back to the OOB base to try using other components. If all that fails, then the error is reported to the RML, which reports to the errmgr for instructions * obviously from the above, multiple OOB components (e.g., TCP and UD) can be active in parallel * the matching code has been moved to the RML (and out of the OOB/TCP component) so it is independent of transport * routing is done by the individual OOB modules (as opposed to the RML). Thus, both routed and non-routed transports can simultaneously be active * all blocking send/recv APIs have been removed. Everything operates asynchronously. KNOWN LIMITATIONS: * although provision is made for component failover as described above, the code for doing so has not been fully implemented yet. At the moment, if all connections for a given peer fail, the errmgr is notified of a "lost connection", which by default results in termination of the job if it was a lifeline * the IPv6 code is present and compiles, but is not complete. Since the current IPv6 support in the OOB doesn't work anyway, I don't consider this a blocker * routing is performed at the individual module level, yet the active routed component is selected on a global basis. We probably should update that to reflect that different transports may need/choose to route in different ways * obviously, not every error path has been tested nor necessarily covered * determining abnormal termination is more challenging than in the old code as we now potentially have multiple ways of connecting to a process. Ideally, we would declare "connection failed" when *all* transports can no longer reach the process, but that requires some additional (possibly complex) code. For now, the code replicates the old behavior only somewhat modified - i.e., if a module sees its connection fail, it checks to see if it is a lifeline. If so, it notifies the errmgr that the lifeline is lost - otherwise, it notifies the errmgr that a non-lifeline connection was lost. * reachability is determined solely on the basis of a shared subnet address/mask - more sophisticated algorithms (e.g., the one used in the tcp btl) are required to handle routing via gateways * the RML needs to assign sequence numbers to each message on a per-peer basis. The receiving RML will then deliver messages in order, thus preventing out-of-order messaging in the case where messages travel across different transports or a message needs to be redirected/resent due to failure of a NIC This commit was SVN r29058.
2013-08-22 20:37:40 +04:00
/* strip any trailing % data as it isn't pertinent */
if (NULL != (p = strrchr(name, '%'))) {
*p = '\0';
}
return name;
#else
return inet_ntoa(((struct sockaddr_in*) addr)->sin_addr);
#endif
}
int
opal_net_get_port(const struct sockaddr *addr)
{
switch (addr->sa_family) {
case AF_INET:
return ntohs(((struct sockaddr_in*) addr)->sin_port);
break;
As per the RFC, bring in the ORTE async progress code and the rewrite of OOB: *** THIS RFC INCLUDES A MINOR CHANGE TO THE MPI-RTE INTERFACE *** Note: during the course of this work, it was necessary to completely separate the MPI and RTE progress engines. There were multiple places in the MPI layer where ORTE_WAIT_FOR_COMPLETION was being used. A new OMPI_WAIT_FOR_COMPLETION macro was created (defined in ompi/mca/rte/rte.h) that simply cycles across opal_progress until the provided flag becomes false. Places where the MPI layer blocked waiting for RTE to complete an event have been modified to use this macro. *************************************************************************************** I am reissuing this RFC because of the time that has passed since its original release. Since its initial release and review, I have debugged it further to ensure it fully supports tests like loop_spawn. It therefore seems ready for merge back to the trunk. Given its prior review, I have set the timeout for one week. The code is in https://bitbucket.org/rhc/ompi-oob2 WHAT: Rewrite of ORTE OOB WHY: Support asynchronous progress and a host of other features WHEN: Wed, August 21 SYNOPSIS: The current OOB has served us well, but a number of limitations have been identified over the years. Specifically: * it is only progressed when called via opal_progress, which can lead to hangs or recursive calls into libevent (which is not supported by that code) * we've had issues when multiple NICs are available as the code doesn't "shift" messages between transports - thus, all nodes had to be available via the same TCP interface. * the OOB "unloads" incoming opal_buffer_t objects during the transmission, thus preventing use of OBJ_RETAIN in the code when repeatedly sending the same message to multiple recipients * there is no failover mechanism across NICs - if the selected NIC (or its attached switch) fails, we are forced to abort * only one transport (i.e., component) can be "active" The revised OOB resolves these problems: * async progress is used for all application processes, with the progress thread blocking in the event library * each available TCP NIC is supported by its own TCP module. The ability to asynchronously progress each module independently is provided, but not enabled by default (a runtime MCA parameter turns it "on") * multi-address TCP NICs (e.g., a NIC with both an IPv4 and IPv6 address, or with virtual interfaces) are supported - reachability is determined by comparing the contact info for a peer against all addresses within the range covered by the address/mask pairs for the NIC. * a message that arrives on one TCP NIC is automatically shifted to whatever NIC that is connected to the next "hop" if that peer cannot be reached by the incoming NIC. If no TCP module will reach the peer, then the OOB attempts to send the message via all other available components - if none can reach the peer, then an "error" is reported back to the RML, which then calls the errmgr for instructions. * opal_buffer_t now conforms to standard object rules re OBJ_RETAIN as we no longer "unload" the incoming object * NIC failure is reported to the TCP component, which then tries to resend the message across any other available TCP NIC. If that doesn't work, then the message is given back to the OOB base to try using other components. If all that fails, then the error is reported to the RML, which reports to the errmgr for instructions * obviously from the above, multiple OOB components (e.g., TCP and UD) can be active in parallel * the matching code has been moved to the RML (and out of the OOB/TCP component) so it is independent of transport * routing is done by the individual OOB modules (as opposed to the RML). Thus, both routed and non-routed transports can simultaneously be active * all blocking send/recv APIs have been removed. Everything operates asynchronously. KNOWN LIMITATIONS: * although provision is made for component failover as described above, the code for doing so has not been fully implemented yet. At the moment, if all connections for a given peer fail, the errmgr is notified of a "lost connection", which by default results in termination of the job if it was a lifeline * the IPv6 code is present and compiles, but is not complete. Since the current IPv6 support in the OOB doesn't work anyway, I don't consider this a blocker * routing is performed at the individual module level, yet the active routed component is selected on a global basis. We probably should update that to reflect that different transports may need/choose to route in different ways * obviously, not every error path has been tested nor necessarily covered * determining abnormal termination is more challenging than in the old code as we now potentially have multiple ways of connecting to a process. Ideally, we would declare "connection failed" when *all* transports can no longer reach the process, but that requires some additional (possibly complex) code. For now, the code replicates the old behavior only somewhat modified - i.e., if a module sees its connection fail, it checks to see if it is a lifeline. If so, it notifies the errmgr that the lifeline is lost - otherwise, it notifies the errmgr that a non-lifeline connection was lost. * reachability is determined solely on the basis of a shared subnet address/mask - more sophisticated algorithms (e.g., the one used in the tcp btl) are required to handle routing via gateways * the RML needs to assign sequence numbers to each message on a per-peer basis. The receiving RML will then deliver messages in order, thus preventing out-of-order messaging in the case where messages travel across different transports or a message needs to be redirected/resent due to failure of a NIC This commit was SVN r29058.
2013-08-22 20:37:40 +04:00
#if OPAL_ENABLE_IPV6
case AF_INET6:
return ntohs(((struct sockaddr_in6*) addr)->sin6_port);
break;
#endif
}
return -1;
}
#else /* HAVE_STRUCT_SOCKADDR_IN */
int
opal_net_init()
{
return OPAL_SUCCESS;
}
int
opal_net_finalize()
{
return OPAL_SUCCESS;
}
uint32_t
opal_net_prefix2netmask(uint32_t prefixlen)
{
return 0;
}
bool
opal_net_islocalhost(const struct sockaddr *addr)
{
return false;
}
bool
2015-06-24 06:59:57 +03:00
opal_net_samenetwork(const struct sockaddr *addr1,
const struct sockaddr *addr2,
uint32_t prefixlen)
{
return false;
}
bool
opal_net_addr_isipv4public(const struct sockaddr *addr)
{
return false;
}
char*
opal_net_get_hostname(const struct sockaddr *addr)
{
return NULL;
}
int
opal_net_get_port(const struct sockaddr *addr)
{
return -1;
}
#endif /* HAVE_STRUCT_SOCKADDR_IN */