1
1
openmpi/orte/mca/snapc/snapc.h

406 строки
13 KiB
C
Исходник Обычный вид История

/* -*- Mode: C; c-basic-offset:4 ; indent-tabs-mode:nil -*- */
/*
A number of C/R enhancements per RFC below: http://www.open-mpi.org/community/lists/devel/2010/07/8240.php Documentation: http://osl.iu.edu/research/ft/ Major Changes: -------------- * Added C/R-enabled Debugging support. Enabled with the --enable-crdebug flag. See the following website for more information: http://osl.iu.edu/research/ft/crdebug/ * Added Stable Storage (SStore) framework for checkpoint storage * 'central' component does a direct to central storage save * 'stage' component stages checkpoints to central storage while the application continues execution. * 'stage' supports offline compression of checkpoints before moving (sstore_stage_compress) * 'stage' supports local caching of checkpoints to improve automatic recovery (sstore_stage_caching) * Added Compression (compress) framework to support * Add two new ErrMgr recovery policies * {{{crmig}}} C/R Process Migration * {{{autor}}} C/R Automatic Recovery * Added the {{{ompi-migrate}}} command line tool to support the {{{crmig}}} ErrMgr component * Added CR MPI Ext functions (enable them with {{{--enable-mpi-ext=cr}}} configure option) * {{{OMPI_CR_Checkpoint}}} (Fixes trac:2342) * {{{OMPI_CR_Restart}}} * {{{OMPI_CR_Migrate}}} (may need some more work for mapping rules) * {{{OMPI_CR_INC_register_callback}}} (Fixes trac:2192) * {{{OMPI_CR_Quiesce_start}}} * {{{OMPI_CR_Quiesce_checkpoint}}} * {{{OMPI_CR_Quiesce_end}}} * {{{OMPI_CR_self_register_checkpoint_callback}}} * {{{OMPI_CR_self_register_restart_callback}}} * {{{OMPI_CR_self_register_continue_callback}}} * The ErrMgr predicted_fault() interface has been changed to take an opal_list_t of ErrMgr defined types. This will allow us to better support a wider range of fault prediction services in the future. * Add a progress meter to: * FileM rsh (filem_rsh_process_meter) * SnapC full (snapc_full_progress_meter) * SStore stage (sstore_stage_progress_meter) * Added 2 new command line options to ompi-restart * --showme : Display the full command line that would have been exec'ed. * --mpirun_opts : Command line options to pass directly to mpirun. (Fixes trac:2413) * Deprecated some MCA params: * crs_base_snapshot_dir deprecated, use sstore_stage_local_snapshot_dir * snapc_base_global_snapshot_dir deprecated, use sstore_base_global_snapshot_dir * snapc_base_global_shared deprecated, use sstore_stage_global_is_shared * snapc_base_store_in_place deprecated, replaced with different components of SStore * snapc_base_global_snapshot_ref deprecated, use sstore_base_global_snapshot_ref * snapc_base_establish_global_snapshot_dir deprecated, never well supported * snapc_full_skip_filem deprecated, use sstore_stage_skip_filem Minor Changes: -------------- * Fixes trac:1924 : {{{ompi-restart}}} now recognizes path prefixed checkpoint handles and does the right thing. * Fixes trac:2097 : {{{ompi-info}}} should now report all available CRS components * Fixes trac:2161 : Manual checkpoint movement. A user can 'mv' a checkpoint directory from the original location to another and still restart from it. * Fixes trac:2208 : Honor various TMPDIR varaibles instead of forcing {{{/tmp}}} * Move {{{ompi_cr_continue_like_restart}}} to {{{orte_cr_continue_like_restart}}} to be more flexible in where this should be set. * opal_crs_base_metadata_write* functions have been moved to SStore to support a wider range of metadata handling functionality. * Cleanup the CRS framework and components to work with the SStore framework. * Cleanup the SnapC framework and components to work with the SStore framework (cleans up these code paths considerably). * Add 'quiesce' hook to CRCP for a future enhancement. * We now require a BLCR version that supports {{{cr_request_file()}}} or {{{cr_request_checkpoint()}}} in order to make the code more maintainable. Note that {{{cr_request_file}}} has been deprecated since 0.7.0, so we prefer to use {{{cr_request_checkpoint()}}}. * Add optional application level INC callbacks (registered through the CR MPI Ext interface). * Increase the {{{opal_cr_thread_sleep_wait}}} parameter to 1000 microseconds to make the C/R thread less aggressive. * {{{opal-restart}}} now looks for cache directories before falling back on stable storage when asked. * {{{opal-restart}}} also support local decompression before restarting * {{{orte-checkpoint}}} now uses the SStore framework to work with the metadata * {{{orte-restart}}} now uses the SStore framework to work with the metadata * Remove the {{{orte-restart}}} preload option. This was removed since the user only needs to select the 'stage' component in order to support this functionality. * Since the '-am' parameter is saved in the metadata, {{{ompi-restart}}} no longer hard codes {{{-am ft-enable-cr}}}. * Fix {{{hnp}}} ErrMgr so that if a previous component in the stack has 'fixed' the problem, then it should be skipped. * Make sure to decrement the number of 'num_local_procs' in the orted when one goes away. * odls now checks the SStore framework to see if it needs to load any checkpoint files before launching (to support 'stage'). This separates the SStore logic from the --preload-[binary|files] options. * Add unique IDs to the named pipes established between the orted and the app in SnapC. This is to better support migration and automatic recovery activities. * Improve the checks for 'already checkpointing' error path. * A a recovery output timer, to show how long it takes to restart a job * Do a better job of cleaning up the old session directory on restart. * Add a local module to the autor and crmig ErrMgr components. These small modules prevent the 'orted' component from attempting a local recovery (Which does not work for MPI apps at the moment) * Add a fix for bounding the checkpointable region between MPI_Init and MPI_Finalize. This commit was SVN r23587. The following Trac tickets were found above: Ticket 1924 --> https://svn.open-mpi.org/trac/ompi/ticket/1924 Ticket 2097 --> https://svn.open-mpi.org/trac/ompi/ticket/2097 Ticket 2161 --> https://svn.open-mpi.org/trac/ompi/ticket/2161 Ticket 2192 --> https://svn.open-mpi.org/trac/ompi/ticket/2192 Ticket 2208 --> https://svn.open-mpi.org/trac/ompi/ticket/2208 Ticket 2342 --> https://svn.open-mpi.org/trac/ompi/ticket/2342 Ticket 2413 --> https://svn.open-mpi.org/trac/ompi/ticket/2413
2010-08-10 20:51:11 +00:00
* Copyright (c) 2004-2010 The Trustees of Indiana University and Indiana
* University Research and Technology
* Corporation. All rights reserved.
* Copyright (c) 2004-2005 The University of Tennessee and The University
* of Tennessee Research Foundation. All rights
* reserved.
2015-06-23 20:59:57 -07:00
* Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
* University of Stuttgart. All rights reserved.
* Copyright (c) 2004-2005 The Regents of the University of California.
* All rights reserved.
* Copyright (c) 2015 Los Alamos National Security, LLC. All rights
* reserved.
* $COPYRIGHT$
2015-06-23 20:59:57 -07:00
*
* Additional copyrights may follow
2015-06-23 20:59:57 -07:00
*
* $HEADER$
*/
/**
* @file
*
* Snapshot Coordination (SNAPC) Interface
*
* Terminology:
* ------------
* Global Snapshot Coordinator:
* - HNP(s) coordination function.
* Local Snapshot Coordinator
* - VHNP(s) [e.g., orted] coordination function
* Application Snapshot Coordinator
* - Application level coordinaton function
* Local Snapshot
* - Snapshot generated by a single process in the parallel job
* Local Snapshot Reference
2015-06-23 20:59:57 -07:00
* - A generic reference to the physical Local Snapshot
* Global Snapshot
* - Snapshot generated for the entire parallel job
* Global Snapshot Reference
2015-06-23 20:59:57 -07:00
* - A generic reference to the physical Global Snapshot
*
* General Description:
* ---------------------
* This framework is tasked with:
* - Initiating the checkpoint in the system
* - Physically moving the local snapshot files to a location
* Initially this location, is the node on which the Head Node Process (HNP)
* is running, but later this will be a replicated checkpoint server or
* the like.
* - Generating a 'global snapshot handle' that the user can use to restart
* the parallel job.
*
* Each component will have 3 teirs of behavior that must behave in concert:
* - Global Snapshot Coordinator
* This is the HNPs tasks. Mostly distributing the notification of the
* checkpoint, and then compiling the physical and virtual nature of the
* global snapshot handle.
* - Local Snapshot Coordinator
* This is the VHNPs (or orted, if available) tasks. This will involve
* working with the Global Snapshot Coordinator to route the physical
* and virtual 'local snapshot's from the application to the desired
* location. This process must also notify the Global Snapshot Coordinator
* when it's set of processes have completed the checkpoint.
* - Application Snapshot Coordinator
* This is the application level coordinator. This is very light, just
* a subscription to be triggered when it needs to checkpoint, and then,
* once finished with the checkpoint, notify the Local Snapshot Coordinator
* that it is complete.
* If there is no orted (so no bootproxy), then the application assumes the
* responsibility of the Local Snapshot Coordinator as well.
*
*/
#ifndef MCA_SNAPC_H
#define MCA_SNAPC_H
#include "orte_config.h"
#include "orte/constants.h"
#include "orte/types.h"
#include "orte/mca/mca.h"
#include "opal/mca/base/base.h"
#include "opal/mca/crs/crs.h"
#include "opal/mca/crs/base/base.h"
#include "opal/class/opal_object.h"
A number of C/R enhancements per RFC below: http://www.open-mpi.org/community/lists/devel/2010/07/8240.php Documentation: http://osl.iu.edu/research/ft/ Major Changes: -------------- * Added C/R-enabled Debugging support. Enabled with the --enable-crdebug flag. See the following website for more information: http://osl.iu.edu/research/ft/crdebug/ * Added Stable Storage (SStore) framework for checkpoint storage * 'central' component does a direct to central storage save * 'stage' component stages checkpoints to central storage while the application continues execution. * 'stage' supports offline compression of checkpoints before moving (sstore_stage_compress) * 'stage' supports local caching of checkpoints to improve automatic recovery (sstore_stage_caching) * Added Compression (compress) framework to support * Add two new ErrMgr recovery policies * {{{crmig}}} C/R Process Migration * {{{autor}}} C/R Automatic Recovery * Added the {{{ompi-migrate}}} command line tool to support the {{{crmig}}} ErrMgr component * Added CR MPI Ext functions (enable them with {{{--enable-mpi-ext=cr}}} configure option) * {{{OMPI_CR_Checkpoint}}} (Fixes trac:2342) * {{{OMPI_CR_Restart}}} * {{{OMPI_CR_Migrate}}} (may need some more work for mapping rules) * {{{OMPI_CR_INC_register_callback}}} (Fixes trac:2192) * {{{OMPI_CR_Quiesce_start}}} * {{{OMPI_CR_Quiesce_checkpoint}}} * {{{OMPI_CR_Quiesce_end}}} * {{{OMPI_CR_self_register_checkpoint_callback}}} * {{{OMPI_CR_self_register_restart_callback}}} * {{{OMPI_CR_self_register_continue_callback}}} * The ErrMgr predicted_fault() interface has been changed to take an opal_list_t of ErrMgr defined types. This will allow us to better support a wider range of fault prediction services in the future. * Add a progress meter to: * FileM rsh (filem_rsh_process_meter) * SnapC full (snapc_full_progress_meter) * SStore stage (sstore_stage_progress_meter) * Added 2 new command line options to ompi-restart * --showme : Display the full command line that would have been exec'ed. * --mpirun_opts : Command line options to pass directly to mpirun. (Fixes trac:2413) * Deprecated some MCA params: * crs_base_snapshot_dir deprecated, use sstore_stage_local_snapshot_dir * snapc_base_global_snapshot_dir deprecated, use sstore_base_global_snapshot_dir * snapc_base_global_shared deprecated, use sstore_stage_global_is_shared * snapc_base_store_in_place deprecated, replaced with different components of SStore * snapc_base_global_snapshot_ref deprecated, use sstore_base_global_snapshot_ref * snapc_base_establish_global_snapshot_dir deprecated, never well supported * snapc_full_skip_filem deprecated, use sstore_stage_skip_filem Minor Changes: -------------- * Fixes trac:1924 : {{{ompi-restart}}} now recognizes path prefixed checkpoint handles and does the right thing. * Fixes trac:2097 : {{{ompi-info}}} should now report all available CRS components * Fixes trac:2161 : Manual checkpoint movement. A user can 'mv' a checkpoint directory from the original location to another and still restart from it. * Fixes trac:2208 : Honor various TMPDIR varaibles instead of forcing {{{/tmp}}} * Move {{{ompi_cr_continue_like_restart}}} to {{{orte_cr_continue_like_restart}}} to be more flexible in where this should be set. * opal_crs_base_metadata_write* functions have been moved to SStore to support a wider range of metadata handling functionality. * Cleanup the CRS framework and components to work with the SStore framework. * Cleanup the SnapC framework and components to work with the SStore framework (cleans up these code paths considerably). * Add 'quiesce' hook to CRCP for a future enhancement. * We now require a BLCR version that supports {{{cr_request_file()}}} or {{{cr_request_checkpoint()}}} in order to make the code more maintainable. Note that {{{cr_request_file}}} has been deprecated since 0.7.0, so we prefer to use {{{cr_request_checkpoint()}}}. * Add optional application level INC callbacks (registered through the CR MPI Ext interface). * Increase the {{{opal_cr_thread_sleep_wait}}} parameter to 1000 microseconds to make the C/R thread less aggressive. * {{{opal-restart}}} now looks for cache directories before falling back on stable storage when asked. * {{{opal-restart}}} also support local decompression before restarting * {{{orte-checkpoint}}} now uses the SStore framework to work with the metadata * {{{orte-restart}}} now uses the SStore framework to work with the metadata * Remove the {{{orte-restart}}} preload option. This was removed since the user only needs to select the 'stage' component in order to support this functionality. * Since the '-am' parameter is saved in the metadata, {{{ompi-restart}}} no longer hard codes {{{-am ft-enable-cr}}}. * Fix {{{hnp}}} ErrMgr so that if a previous component in the stack has 'fixed' the problem, then it should be skipped. * Make sure to decrement the number of 'num_local_procs' in the orted when one goes away. * odls now checks the SStore framework to see if it needs to load any checkpoint files before launching (to support 'stage'). This separates the SStore logic from the --preload-[binary|files] options. * Add unique IDs to the named pipes established between the orted and the app in SnapC. This is to better support migration and automatic recovery activities. * Improve the checks for 'already checkpointing' error path. * A a recovery output timer, to show how long it takes to restart a job * Do a better job of cleaning up the old session directory on restart. * Add a local module to the autor and crmig ErrMgr components. These small modules prevent the 'orted' component from attempting a local recovery (Which does not work for MPI apps at the moment) * Add a fix for bounding the checkpointable region between MPI_Init and MPI_Finalize. This commit was SVN r23587. The following Trac tickets were found above: Ticket 1924 --> https://svn.open-mpi.org/trac/ompi/ticket/1924 Ticket 2097 --> https://svn.open-mpi.org/trac/ompi/ticket/2097 Ticket 2161 --> https://svn.open-mpi.org/trac/ompi/ticket/2161 Ticket 2192 --> https://svn.open-mpi.org/trac/ompi/ticket/2192 Ticket 2208 --> https://svn.open-mpi.org/trac/ompi/ticket/2208 Ticket 2342 --> https://svn.open-mpi.org/trac/ompi/ticket/2342 Ticket 2413 --> https://svn.open-mpi.org/trac/ompi/ticket/2413
2010-08-10 20:51:11 +00:00
#include "opal/class/opal_pointer_array.h"
#include "opal/util/output.h"
A number of C/R enhancements per RFC below: http://www.open-mpi.org/community/lists/devel/2010/07/8240.php Documentation: http://osl.iu.edu/research/ft/ Major Changes: -------------- * Added C/R-enabled Debugging support. Enabled with the --enable-crdebug flag. See the following website for more information: http://osl.iu.edu/research/ft/crdebug/ * Added Stable Storage (SStore) framework for checkpoint storage * 'central' component does a direct to central storage save * 'stage' component stages checkpoints to central storage while the application continues execution. * 'stage' supports offline compression of checkpoints before moving (sstore_stage_compress) * 'stage' supports local caching of checkpoints to improve automatic recovery (sstore_stage_caching) * Added Compression (compress) framework to support * Add two new ErrMgr recovery policies * {{{crmig}}} C/R Process Migration * {{{autor}}} C/R Automatic Recovery * Added the {{{ompi-migrate}}} command line tool to support the {{{crmig}}} ErrMgr component * Added CR MPI Ext functions (enable them with {{{--enable-mpi-ext=cr}}} configure option) * {{{OMPI_CR_Checkpoint}}} (Fixes trac:2342) * {{{OMPI_CR_Restart}}} * {{{OMPI_CR_Migrate}}} (may need some more work for mapping rules) * {{{OMPI_CR_INC_register_callback}}} (Fixes trac:2192) * {{{OMPI_CR_Quiesce_start}}} * {{{OMPI_CR_Quiesce_checkpoint}}} * {{{OMPI_CR_Quiesce_end}}} * {{{OMPI_CR_self_register_checkpoint_callback}}} * {{{OMPI_CR_self_register_restart_callback}}} * {{{OMPI_CR_self_register_continue_callback}}} * The ErrMgr predicted_fault() interface has been changed to take an opal_list_t of ErrMgr defined types. This will allow us to better support a wider range of fault prediction services in the future. * Add a progress meter to: * FileM rsh (filem_rsh_process_meter) * SnapC full (snapc_full_progress_meter) * SStore stage (sstore_stage_progress_meter) * Added 2 new command line options to ompi-restart * --showme : Display the full command line that would have been exec'ed. * --mpirun_opts : Command line options to pass directly to mpirun. (Fixes trac:2413) * Deprecated some MCA params: * crs_base_snapshot_dir deprecated, use sstore_stage_local_snapshot_dir * snapc_base_global_snapshot_dir deprecated, use sstore_base_global_snapshot_dir * snapc_base_global_shared deprecated, use sstore_stage_global_is_shared * snapc_base_store_in_place deprecated, replaced with different components of SStore * snapc_base_global_snapshot_ref deprecated, use sstore_base_global_snapshot_ref * snapc_base_establish_global_snapshot_dir deprecated, never well supported * snapc_full_skip_filem deprecated, use sstore_stage_skip_filem Minor Changes: -------------- * Fixes trac:1924 : {{{ompi-restart}}} now recognizes path prefixed checkpoint handles and does the right thing. * Fixes trac:2097 : {{{ompi-info}}} should now report all available CRS components * Fixes trac:2161 : Manual checkpoint movement. A user can 'mv' a checkpoint directory from the original location to another and still restart from it. * Fixes trac:2208 : Honor various TMPDIR varaibles instead of forcing {{{/tmp}}} * Move {{{ompi_cr_continue_like_restart}}} to {{{orte_cr_continue_like_restart}}} to be more flexible in where this should be set. * opal_crs_base_metadata_write* functions have been moved to SStore to support a wider range of metadata handling functionality. * Cleanup the CRS framework and components to work with the SStore framework. * Cleanup the SnapC framework and components to work with the SStore framework (cleans up these code paths considerably). * Add 'quiesce' hook to CRCP for a future enhancement. * We now require a BLCR version that supports {{{cr_request_file()}}} or {{{cr_request_checkpoint()}}} in order to make the code more maintainable. Note that {{{cr_request_file}}} has been deprecated since 0.7.0, so we prefer to use {{{cr_request_checkpoint()}}}. * Add optional application level INC callbacks (registered through the CR MPI Ext interface). * Increase the {{{opal_cr_thread_sleep_wait}}} parameter to 1000 microseconds to make the C/R thread less aggressive. * {{{opal-restart}}} now looks for cache directories before falling back on stable storage when asked. * {{{opal-restart}}} also support local decompression before restarting * {{{orte-checkpoint}}} now uses the SStore framework to work with the metadata * {{{orte-restart}}} now uses the SStore framework to work with the metadata * Remove the {{{orte-restart}}} preload option. This was removed since the user only needs to select the 'stage' component in order to support this functionality. * Since the '-am' parameter is saved in the metadata, {{{ompi-restart}}} no longer hard codes {{{-am ft-enable-cr}}}. * Fix {{{hnp}}} ErrMgr so that if a previous component in the stack has 'fixed' the problem, then it should be skipped. * Make sure to decrement the number of 'num_local_procs' in the orted when one goes away. * odls now checks the SStore framework to see if it needs to load any checkpoint files before launching (to support 'stage'). This separates the SStore logic from the --preload-[binary|files] options. * Add unique IDs to the named pipes established between the orted and the app in SnapC. This is to better support migration and automatic recovery activities. * Improve the checks for 'already checkpointing' error path. * A a recovery output timer, to show how long it takes to restart a job * Do a better job of cleaning up the old session directory on restart. * Add a local module to the autor and crmig ErrMgr components. These small modules prevent the 'orted' component from attempting a local recovery (Which does not work for MPI apps at the moment) * Add a fix for bounding the checkpointable region between MPI_Init and MPI_Finalize. This commit was SVN r23587. The following Trac tickets were found above: Ticket 1924 --> https://svn.open-mpi.org/trac/ompi/ticket/1924 Ticket 2097 --> https://svn.open-mpi.org/trac/ompi/ticket/2097 Ticket 2161 --> https://svn.open-mpi.org/trac/ompi/ticket/2161 Ticket 2192 --> https://svn.open-mpi.org/trac/ompi/ticket/2192 Ticket 2208 --> https://svn.open-mpi.org/trac/ompi/ticket/2208 Ticket 2342 --> https://svn.open-mpi.org/trac/ompi/ticket/2342 Ticket 2413 --> https://svn.open-mpi.org/trac/ompi/ticket/2413
2010-08-10 20:51:11 +00:00
#include "orte/mca/sstore/sstore.h"
BEGIN_C_DECLS
/**
* States that a process can be in while checkpointing
*/
/* Reached an error */
#define ORTE_SNAPC_CKPT_STATE_ERROR 0
/* Doing no checkpoint -- Quiet state */
#define ORTE_SNAPC_CKPT_STATE_NONE 1
/* There has been a request for a checkpoint from one of the applications */
#define ORTE_SNAPC_CKPT_STATE_REQUEST 2
/* There is a Pending checkpoint for this process */
#define ORTE_SNAPC_CKPT_STATE_PENDING 3
/* Running the checkpoint */
2009-09-22 18:26:12 +00:00
#define ORTE_SNAPC_CKPT_STATE_RUNNING 4
A number of C/R enhancements per RFC below: http://www.open-mpi.org/community/lists/devel/2010/07/8240.php Documentation: http://osl.iu.edu/research/ft/ Major Changes: -------------- * Added C/R-enabled Debugging support. Enabled with the --enable-crdebug flag. See the following website for more information: http://osl.iu.edu/research/ft/crdebug/ * Added Stable Storage (SStore) framework for checkpoint storage * 'central' component does a direct to central storage save * 'stage' component stages checkpoints to central storage while the application continues execution. * 'stage' supports offline compression of checkpoints before moving (sstore_stage_compress) * 'stage' supports local caching of checkpoints to improve automatic recovery (sstore_stage_caching) * Added Compression (compress) framework to support * Add two new ErrMgr recovery policies * {{{crmig}}} C/R Process Migration * {{{autor}}} C/R Automatic Recovery * Added the {{{ompi-migrate}}} command line tool to support the {{{crmig}}} ErrMgr component * Added CR MPI Ext functions (enable them with {{{--enable-mpi-ext=cr}}} configure option) * {{{OMPI_CR_Checkpoint}}} (Fixes trac:2342) * {{{OMPI_CR_Restart}}} * {{{OMPI_CR_Migrate}}} (may need some more work for mapping rules) * {{{OMPI_CR_INC_register_callback}}} (Fixes trac:2192) * {{{OMPI_CR_Quiesce_start}}} * {{{OMPI_CR_Quiesce_checkpoint}}} * {{{OMPI_CR_Quiesce_end}}} * {{{OMPI_CR_self_register_checkpoint_callback}}} * {{{OMPI_CR_self_register_restart_callback}}} * {{{OMPI_CR_self_register_continue_callback}}} * The ErrMgr predicted_fault() interface has been changed to take an opal_list_t of ErrMgr defined types. This will allow us to better support a wider range of fault prediction services in the future. * Add a progress meter to: * FileM rsh (filem_rsh_process_meter) * SnapC full (snapc_full_progress_meter) * SStore stage (sstore_stage_progress_meter) * Added 2 new command line options to ompi-restart * --showme : Display the full command line that would have been exec'ed. * --mpirun_opts : Command line options to pass directly to mpirun. (Fixes trac:2413) * Deprecated some MCA params: * crs_base_snapshot_dir deprecated, use sstore_stage_local_snapshot_dir * snapc_base_global_snapshot_dir deprecated, use sstore_base_global_snapshot_dir * snapc_base_global_shared deprecated, use sstore_stage_global_is_shared * snapc_base_store_in_place deprecated, replaced with different components of SStore * snapc_base_global_snapshot_ref deprecated, use sstore_base_global_snapshot_ref * snapc_base_establish_global_snapshot_dir deprecated, never well supported * snapc_full_skip_filem deprecated, use sstore_stage_skip_filem Minor Changes: -------------- * Fixes trac:1924 : {{{ompi-restart}}} now recognizes path prefixed checkpoint handles and does the right thing. * Fixes trac:2097 : {{{ompi-info}}} should now report all available CRS components * Fixes trac:2161 : Manual checkpoint movement. A user can 'mv' a checkpoint directory from the original location to another and still restart from it. * Fixes trac:2208 : Honor various TMPDIR varaibles instead of forcing {{{/tmp}}} * Move {{{ompi_cr_continue_like_restart}}} to {{{orte_cr_continue_like_restart}}} to be more flexible in where this should be set. * opal_crs_base_metadata_write* functions have been moved to SStore to support a wider range of metadata handling functionality. * Cleanup the CRS framework and components to work with the SStore framework. * Cleanup the SnapC framework and components to work with the SStore framework (cleans up these code paths considerably). * Add 'quiesce' hook to CRCP for a future enhancement. * We now require a BLCR version that supports {{{cr_request_file()}}} or {{{cr_request_checkpoint()}}} in order to make the code more maintainable. Note that {{{cr_request_file}}} has been deprecated since 0.7.0, so we prefer to use {{{cr_request_checkpoint()}}}. * Add optional application level INC callbacks (registered through the CR MPI Ext interface). * Increase the {{{opal_cr_thread_sleep_wait}}} parameter to 1000 microseconds to make the C/R thread less aggressive. * {{{opal-restart}}} now looks for cache directories before falling back on stable storage when asked. * {{{opal-restart}}} also support local decompression before restarting * {{{orte-checkpoint}}} now uses the SStore framework to work with the metadata * {{{orte-restart}}} now uses the SStore framework to work with the metadata * Remove the {{{orte-restart}}} preload option. This was removed since the user only needs to select the 'stage' component in order to support this functionality. * Since the '-am' parameter is saved in the metadata, {{{ompi-restart}}} no longer hard codes {{{-am ft-enable-cr}}}. * Fix {{{hnp}}} ErrMgr so that if a previous component in the stack has 'fixed' the problem, then it should be skipped. * Make sure to decrement the number of 'num_local_procs' in the orted when one goes away. * odls now checks the SStore framework to see if it needs to load any checkpoint files before launching (to support 'stage'). This separates the SStore logic from the --preload-[binary|files] options. * Add unique IDs to the named pipes established between the orted and the app in SnapC. This is to better support migration and automatic recovery activities. * Improve the checks for 'already checkpointing' error path. * A a recovery output timer, to show how long it takes to restart a job * Do a better job of cleaning up the old session directory on restart. * Add a local module to the autor and crmig ErrMgr components. These small modules prevent the 'orted' component from attempting a local recovery (Which does not work for MPI apps at the moment) * Add a fix for bounding the checkpointable region between MPI_Init and MPI_Finalize. This commit was SVN r23587. The following Trac tickets were found above: Ticket 1924 --> https://svn.open-mpi.org/trac/ompi/ticket/1924 Ticket 2097 --> https://svn.open-mpi.org/trac/ompi/ticket/2097 Ticket 2161 --> https://svn.open-mpi.org/trac/ompi/ticket/2161 Ticket 2192 --> https://svn.open-mpi.org/trac/ompi/ticket/2192 Ticket 2208 --> https://svn.open-mpi.org/trac/ompi/ticket/2208 Ticket 2342 --> https://svn.open-mpi.org/trac/ompi/ticket/2342 Ticket 2413 --> https://svn.open-mpi.org/trac/ompi/ticket/2413
2010-08-10 20:51:11 +00:00
/* INC Prep Finished */
#define ORTE_SNAPC_CKPT_STATE_INC_PREPED 5
2009-09-22 18:26:12 +00:00
/* All Processes have been stopped */
A number of C/R enhancements per RFC below: http://www.open-mpi.org/community/lists/devel/2010/07/8240.php Documentation: http://osl.iu.edu/research/ft/ Major Changes: -------------- * Added C/R-enabled Debugging support. Enabled with the --enable-crdebug flag. See the following website for more information: http://osl.iu.edu/research/ft/crdebug/ * Added Stable Storage (SStore) framework for checkpoint storage * 'central' component does a direct to central storage save * 'stage' component stages checkpoints to central storage while the application continues execution. * 'stage' supports offline compression of checkpoints before moving (sstore_stage_compress) * 'stage' supports local caching of checkpoints to improve automatic recovery (sstore_stage_caching) * Added Compression (compress) framework to support * Add two new ErrMgr recovery policies * {{{crmig}}} C/R Process Migration * {{{autor}}} C/R Automatic Recovery * Added the {{{ompi-migrate}}} command line tool to support the {{{crmig}}} ErrMgr component * Added CR MPI Ext functions (enable them with {{{--enable-mpi-ext=cr}}} configure option) * {{{OMPI_CR_Checkpoint}}} (Fixes trac:2342) * {{{OMPI_CR_Restart}}} * {{{OMPI_CR_Migrate}}} (may need some more work for mapping rules) * {{{OMPI_CR_INC_register_callback}}} (Fixes trac:2192) * {{{OMPI_CR_Quiesce_start}}} * {{{OMPI_CR_Quiesce_checkpoint}}} * {{{OMPI_CR_Quiesce_end}}} * {{{OMPI_CR_self_register_checkpoint_callback}}} * {{{OMPI_CR_self_register_restart_callback}}} * {{{OMPI_CR_self_register_continue_callback}}} * The ErrMgr predicted_fault() interface has been changed to take an opal_list_t of ErrMgr defined types. This will allow us to better support a wider range of fault prediction services in the future. * Add a progress meter to: * FileM rsh (filem_rsh_process_meter) * SnapC full (snapc_full_progress_meter) * SStore stage (sstore_stage_progress_meter) * Added 2 new command line options to ompi-restart * --showme : Display the full command line that would have been exec'ed. * --mpirun_opts : Command line options to pass directly to mpirun. (Fixes trac:2413) * Deprecated some MCA params: * crs_base_snapshot_dir deprecated, use sstore_stage_local_snapshot_dir * snapc_base_global_snapshot_dir deprecated, use sstore_base_global_snapshot_dir * snapc_base_global_shared deprecated, use sstore_stage_global_is_shared * snapc_base_store_in_place deprecated, replaced with different components of SStore * snapc_base_global_snapshot_ref deprecated, use sstore_base_global_snapshot_ref * snapc_base_establish_global_snapshot_dir deprecated, never well supported * snapc_full_skip_filem deprecated, use sstore_stage_skip_filem Minor Changes: -------------- * Fixes trac:1924 : {{{ompi-restart}}} now recognizes path prefixed checkpoint handles and does the right thing. * Fixes trac:2097 : {{{ompi-info}}} should now report all available CRS components * Fixes trac:2161 : Manual checkpoint movement. A user can 'mv' a checkpoint directory from the original location to another and still restart from it. * Fixes trac:2208 : Honor various TMPDIR varaibles instead of forcing {{{/tmp}}} * Move {{{ompi_cr_continue_like_restart}}} to {{{orte_cr_continue_like_restart}}} to be more flexible in where this should be set. * opal_crs_base_metadata_write* functions have been moved to SStore to support a wider range of metadata handling functionality. * Cleanup the CRS framework and components to work with the SStore framework. * Cleanup the SnapC framework and components to work with the SStore framework (cleans up these code paths considerably). * Add 'quiesce' hook to CRCP for a future enhancement. * We now require a BLCR version that supports {{{cr_request_file()}}} or {{{cr_request_checkpoint()}}} in order to make the code more maintainable. Note that {{{cr_request_file}}} has been deprecated since 0.7.0, so we prefer to use {{{cr_request_checkpoint()}}}. * Add optional application level INC callbacks (registered through the CR MPI Ext interface). * Increase the {{{opal_cr_thread_sleep_wait}}} parameter to 1000 microseconds to make the C/R thread less aggressive. * {{{opal-restart}}} now looks for cache directories before falling back on stable storage when asked. * {{{opal-restart}}} also support local decompression before restarting * {{{orte-checkpoint}}} now uses the SStore framework to work with the metadata * {{{orte-restart}}} now uses the SStore framework to work with the metadata * Remove the {{{orte-restart}}} preload option. This was removed since the user only needs to select the 'stage' component in order to support this functionality. * Since the '-am' parameter is saved in the metadata, {{{ompi-restart}}} no longer hard codes {{{-am ft-enable-cr}}}. * Fix {{{hnp}}} ErrMgr so that if a previous component in the stack has 'fixed' the problem, then it should be skipped. * Make sure to decrement the number of 'num_local_procs' in the orted when one goes away. * odls now checks the SStore framework to see if it needs to load any checkpoint files before launching (to support 'stage'). This separates the SStore logic from the --preload-[binary|files] options. * Add unique IDs to the named pipes established between the orted and the app in SnapC. This is to better support migration and automatic recovery activities. * Improve the checks for 'already checkpointing' error path. * A a recovery output timer, to show how long it takes to restart a job * Do a better job of cleaning up the old session directory on restart. * Add a local module to the autor and crmig ErrMgr components. These small modules prevent the 'orted' component from attempting a local recovery (Which does not work for MPI apps at the moment) * Add a fix for bounding the checkpointable region between MPI_Init and MPI_Finalize. This commit was SVN r23587. The following Trac tickets were found above: Ticket 1924 --> https://svn.open-mpi.org/trac/ompi/ticket/1924 Ticket 2097 --> https://svn.open-mpi.org/trac/ompi/ticket/2097 Ticket 2161 --> https://svn.open-mpi.org/trac/ompi/ticket/2161 Ticket 2192 --> https://svn.open-mpi.org/trac/ompi/ticket/2192 Ticket 2208 --> https://svn.open-mpi.org/trac/ompi/ticket/2208 Ticket 2342 --> https://svn.open-mpi.org/trac/ompi/ticket/2342 Ticket 2413 --> https://svn.open-mpi.org/trac/ompi/ticket/2413
2010-08-10 20:51:11 +00:00
#define ORTE_SNAPC_CKPT_STATE_STOPPED 6
/* Finished the checkpoint locally */
A number of C/R enhancements per RFC below: http://www.open-mpi.org/community/lists/devel/2010/07/8240.php Documentation: http://osl.iu.edu/research/ft/ Major Changes: -------------- * Added C/R-enabled Debugging support. Enabled with the --enable-crdebug flag. See the following website for more information: http://osl.iu.edu/research/ft/crdebug/ * Added Stable Storage (SStore) framework for checkpoint storage * 'central' component does a direct to central storage save * 'stage' component stages checkpoints to central storage while the application continues execution. * 'stage' supports offline compression of checkpoints before moving (sstore_stage_compress) * 'stage' supports local caching of checkpoints to improve automatic recovery (sstore_stage_caching) * Added Compression (compress) framework to support * Add two new ErrMgr recovery policies * {{{crmig}}} C/R Process Migration * {{{autor}}} C/R Automatic Recovery * Added the {{{ompi-migrate}}} command line tool to support the {{{crmig}}} ErrMgr component * Added CR MPI Ext functions (enable them with {{{--enable-mpi-ext=cr}}} configure option) * {{{OMPI_CR_Checkpoint}}} (Fixes trac:2342) * {{{OMPI_CR_Restart}}} * {{{OMPI_CR_Migrate}}} (may need some more work for mapping rules) * {{{OMPI_CR_INC_register_callback}}} (Fixes trac:2192) * {{{OMPI_CR_Quiesce_start}}} * {{{OMPI_CR_Quiesce_checkpoint}}} * {{{OMPI_CR_Quiesce_end}}} * {{{OMPI_CR_self_register_checkpoint_callback}}} * {{{OMPI_CR_self_register_restart_callback}}} * {{{OMPI_CR_self_register_continue_callback}}} * The ErrMgr predicted_fault() interface has been changed to take an opal_list_t of ErrMgr defined types. This will allow us to better support a wider range of fault prediction services in the future. * Add a progress meter to: * FileM rsh (filem_rsh_process_meter) * SnapC full (snapc_full_progress_meter) * SStore stage (sstore_stage_progress_meter) * Added 2 new command line options to ompi-restart * --showme : Display the full command line that would have been exec'ed. * --mpirun_opts : Command line options to pass directly to mpirun. (Fixes trac:2413) * Deprecated some MCA params: * crs_base_snapshot_dir deprecated, use sstore_stage_local_snapshot_dir * snapc_base_global_snapshot_dir deprecated, use sstore_base_global_snapshot_dir * snapc_base_global_shared deprecated, use sstore_stage_global_is_shared * snapc_base_store_in_place deprecated, replaced with different components of SStore * snapc_base_global_snapshot_ref deprecated, use sstore_base_global_snapshot_ref * snapc_base_establish_global_snapshot_dir deprecated, never well supported * snapc_full_skip_filem deprecated, use sstore_stage_skip_filem Minor Changes: -------------- * Fixes trac:1924 : {{{ompi-restart}}} now recognizes path prefixed checkpoint handles and does the right thing. * Fixes trac:2097 : {{{ompi-info}}} should now report all available CRS components * Fixes trac:2161 : Manual checkpoint movement. A user can 'mv' a checkpoint directory from the original location to another and still restart from it. * Fixes trac:2208 : Honor various TMPDIR varaibles instead of forcing {{{/tmp}}} * Move {{{ompi_cr_continue_like_restart}}} to {{{orte_cr_continue_like_restart}}} to be more flexible in where this should be set. * opal_crs_base_metadata_write* functions have been moved to SStore to support a wider range of metadata handling functionality. * Cleanup the CRS framework and components to work with the SStore framework. * Cleanup the SnapC framework and components to work with the SStore framework (cleans up these code paths considerably). * Add 'quiesce' hook to CRCP for a future enhancement. * We now require a BLCR version that supports {{{cr_request_file()}}} or {{{cr_request_checkpoint()}}} in order to make the code more maintainable. Note that {{{cr_request_file}}} has been deprecated since 0.7.0, so we prefer to use {{{cr_request_checkpoint()}}}. * Add optional application level INC callbacks (registered through the CR MPI Ext interface). * Increase the {{{opal_cr_thread_sleep_wait}}} parameter to 1000 microseconds to make the C/R thread less aggressive. * {{{opal-restart}}} now looks for cache directories before falling back on stable storage when asked. * {{{opal-restart}}} also support local decompression before restarting * {{{orte-checkpoint}}} now uses the SStore framework to work with the metadata * {{{orte-restart}}} now uses the SStore framework to work with the metadata * Remove the {{{orte-restart}}} preload option. This was removed since the user only needs to select the 'stage' component in order to support this functionality. * Since the '-am' parameter is saved in the metadata, {{{ompi-restart}}} no longer hard codes {{{-am ft-enable-cr}}}. * Fix {{{hnp}}} ErrMgr so that if a previous component in the stack has 'fixed' the problem, then it should be skipped. * Make sure to decrement the number of 'num_local_procs' in the orted when one goes away. * odls now checks the SStore framework to see if it needs to load any checkpoint files before launching (to support 'stage'). This separates the SStore logic from the --preload-[binary|files] options. * Add unique IDs to the named pipes established between the orted and the app in SnapC. This is to better support migration and automatic recovery activities. * Improve the checks for 'already checkpointing' error path. * A a recovery output timer, to show how long it takes to restart a job * Do a better job of cleaning up the old session directory on restart. * Add a local module to the autor and crmig ErrMgr components. These small modules prevent the 'orted' component from attempting a local recovery (Which does not work for MPI apps at the moment) * Add a fix for bounding the checkpointable region between MPI_Init and MPI_Finalize. This commit was SVN r23587. The following Trac tickets were found above: Ticket 1924 --> https://svn.open-mpi.org/trac/ompi/ticket/1924 Ticket 2097 --> https://svn.open-mpi.org/trac/ompi/ticket/2097 Ticket 2161 --> https://svn.open-mpi.org/trac/ompi/ticket/2161 Ticket 2192 --> https://svn.open-mpi.org/trac/ompi/ticket/2192 Ticket 2208 --> https://svn.open-mpi.org/trac/ompi/ticket/2208 Ticket 2342 --> https://svn.open-mpi.org/trac/ompi/ticket/2342 Ticket 2413 --> https://svn.open-mpi.org/trac/ompi/ticket/2413
2010-08-10 20:51:11 +00:00
#define ORTE_SNAPC_CKPT_STATE_FINISHED_LOCAL 7
/* Migrating */
#define ORTE_SNAPC_CKPT_STATE_MIGRATING 8
/* Finished establishing the checkpoint */
#define ORTE_SNAPC_CKPT_STATE_ESTABLISHED 9
/* Processes continuing or have been recovered (finished post-INC) */
#define ORTE_SNAPC_CKPT_STATE_RECOVERED 10
/* Unable to checkpoint this job */
A number of C/R enhancements per RFC below: http://www.open-mpi.org/community/lists/devel/2010/07/8240.php Documentation: http://osl.iu.edu/research/ft/ Major Changes: -------------- * Added C/R-enabled Debugging support. Enabled with the --enable-crdebug flag. See the following website for more information: http://osl.iu.edu/research/ft/crdebug/ * Added Stable Storage (SStore) framework for checkpoint storage * 'central' component does a direct to central storage save * 'stage' component stages checkpoints to central storage while the application continues execution. * 'stage' supports offline compression of checkpoints before moving (sstore_stage_compress) * 'stage' supports local caching of checkpoints to improve automatic recovery (sstore_stage_caching) * Added Compression (compress) framework to support * Add two new ErrMgr recovery policies * {{{crmig}}} C/R Process Migration * {{{autor}}} C/R Automatic Recovery * Added the {{{ompi-migrate}}} command line tool to support the {{{crmig}}} ErrMgr component * Added CR MPI Ext functions (enable them with {{{--enable-mpi-ext=cr}}} configure option) * {{{OMPI_CR_Checkpoint}}} (Fixes trac:2342) * {{{OMPI_CR_Restart}}} * {{{OMPI_CR_Migrate}}} (may need some more work for mapping rules) * {{{OMPI_CR_INC_register_callback}}} (Fixes trac:2192) * {{{OMPI_CR_Quiesce_start}}} * {{{OMPI_CR_Quiesce_checkpoint}}} * {{{OMPI_CR_Quiesce_end}}} * {{{OMPI_CR_self_register_checkpoint_callback}}} * {{{OMPI_CR_self_register_restart_callback}}} * {{{OMPI_CR_self_register_continue_callback}}} * The ErrMgr predicted_fault() interface has been changed to take an opal_list_t of ErrMgr defined types. This will allow us to better support a wider range of fault prediction services in the future. * Add a progress meter to: * FileM rsh (filem_rsh_process_meter) * SnapC full (snapc_full_progress_meter) * SStore stage (sstore_stage_progress_meter) * Added 2 new command line options to ompi-restart * --showme : Display the full command line that would have been exec'ed. * --mpirun_opts : Command line options to pass directly to mpirun. (Fixes trac:2413) * Deprecated some MCA params: * crs_base_snapshot_dir deprecated, use sstore_stage_local_snapshot_dir * snapc_base_global_snapshot_dir deprecated, use sstore_base_global_snapshot_dir * snapc_base_global_shared deprecated, use sstore_stage_global_is_shared * snapc_base_store_in_place deprecated, replaced with different components of SStore * snapc_base_global_snapshot_ref deprecated, use sstore_base_global_snapshot_ref * snapc_base_establish_global_snapshot_dir deprecated, never well supported * snapc_full_skip_filem deprecated, use sstore_stage_skip_filem Minor Changes: -------------- * Fixes trac:1924 : {{{ompi-restart}}} now recognizes path prefixed checkpoint handles and does the right thing. * Fixes trac:2097 : {{{ompi-info}}} should now report all available CRS components * Fixes trac:2161 : Manual checkpoint movement. A user can 'mv' a checkpoint directory from the original location to another and still restart from it. * Fixes trac:2208 : Honor various TMPDIR varaibles instead of forcing {{{/tmp}}} * Move {{{ompi_cr_continue_like_restart}}} to {{{orte_cr_continue_like_restart}}} to be more flexible in where this should be set. * opal_crs_base_metadata_write* functions have been moved to SStore to support a wider range of metadata handling functionality. * Cleanup the CRS framework and components to work with the SStore framework. * Cleanup the SnapC framework and components to work with the SStore framework (cleans up these code paths considerably). * Add 'quiesce' hook to CRCP for a future enhancement. * We now require a BLCR version that supports {{{cr_request_file()}}} or {{{cr_request_checkpoint()}}} in order to make the code more maintainable. Note that {{{cr_request_file}}} has been deprecated since 0.7.0, so we prefer to use {{{cr_request_checkpoint()}}}. * Add optional application level INC callbacks (registered through the CR MPI Ext interface). * Increase the {{{opal_cr_thread_sleep_wait}}} parameter to 1000 microseconds to make the C/R thread less aggressive. * {{{opal-restart}}} now looks for cache directories before falling back on stable storage when asked. * {{{opal-restart}}} also support local decompression before restarting * {{{orte-checkpoint}}} now uses the SStore framework to work with the metadata * {{{orte-restart}}} now uses the SStore framework to work with the metadata * Remove the {{{orte-restart}}} preload option. This was removed since the user only needs to select the 'stage' component in order to support this functionality. * Since the '-am' parameter is saved in the metadata, {{{ompi-restart}}} no longer hard codes {{{-am ft-enable-cr}}}. * Fix {{{hnp}}} ErrMgr so that if a previous component in the stack has 'fixed' the problem, then it should be skipped. * Make sure to decrement the number of 'num_local_procs' in the orted when one goes away. * odls now checks the SStore framework to see if it needs to load any checkpoint files before launching (to support 'stage'). This separates the SStore logic from the --preload-[binary|files] options. * Add unique IDs to the named pipes established between the orted and the app in SnapC. This is to better support migration and automatic recovery activities. * Improve the checks for 'already checkpointing' error path. * A a recovery output timer, to show how long it takes to restart a job * Do a better job of cleaning up the old session directory on restart. * Add a local module to the autor and crmig ErrMgr components. These small modules prevent the 'orted' component from attempting a local recovery (Which does not work for MPI apps at the moment) * Add a fix for bounding the checkpointable region between MPI_Init and MPI_Finalize. This commit was SVN r23587. The following Trac tickets were found above: Ticket 1924 --> https://svn.open-mpi.org/trac/ompi/ticket/1924 Ticket 2097 --> https://svn.open-mpi.org/trac/ompi/ticket/2097 Ticket 2161 --> https://svn.open-mpi.org/trac/ompi/ticket/2161 Ticket 2192 --> https://svn.open-mpi.org/trac/ompi/ticket/2192 Ticket 2208 --> https://svn.open-mpi.org/trac/ompi/ticket/2208 Ticket 2342 --> https://svn.open-mpi.org/trac/ompi/ticket/2342 Ticket 2413 --> https://svn.open-mpi.org/trac/ompi/ticket/2413
2010-08-10 20:51:11 +00:00
#define ORTE_SNAPC_CKPT_STATE_NO_CKPT 11
/* Unable to restart this job */
#define ORTE_SNAPC_CKPT_STATE_NO_RESTART 12
#define ORTE_SNAPC_CKPT_MAX 13
/**
* Sufficiently high shift value to avoid colliding the process
* checkpointing states above with the ORTE process states
*/
#define ORTE_SNAPC_CKPT_SHIFT 131072
/* Uniquely encode the SNAPC state */
#define ORTE_SNAPC_CKPT_NOTIFY(state) (ORTE_SNAPC_CKPT_SHIFT + state)
/* Decode the SNAPC state */
#define ORTE_SNAPC_CKPT_STATE(state) (state - ORTE_SNAPC_CKPT_SHIFT)
/* Check whether a state is a SNAPC state or not. */
#define CHECK_ORTE_SNAPC_CKPT_STATE(state) (state >= ORTE_SNAPC_CKPT_SHIFT)
/**
* Definition of a orte local snapshot.
* Similar to the opal_crs_base_snapshot_t except that it
* contains process contact information.
*/
struct orte_snapc_base_local_snapshot_1_0_0_t {
/** List super object */
opal_list_item_t super;
/** ORTE Process name */
orte_process_name_t process_name;
/** State of the checkpoint */
int state;
A number of C/R enhancements per RFC below: http://www.open-mpi.org/community/lists/devel/2010/07/8240.php Documentation: http://osl.iu.edu/research/ft/ Major Changes: -------------- * Added C/R-enabled Debugging support. Enabled with the --enable-crdebug flag. See the following website for more information: http://osl.iu.edu/research/ft/crdebug/ * Added Stable Storage (SStore) framework for checkpoint storage * 'central' component does a direct to central storage save * 'stage' component stages checkpoints to central storage while the application continues execution. * 'stage' supports offline compression of checkpoints before moving (sstore_stage_compress) * 'stage' supports local caching of checkpoints to improve automatic recovery (sstore_stage_caching) * Added Compression (compress) framework to support * Add two new ErrMgr recovery policies * {{{crmig}}} C/R Process Migration * {{{autor}}} C/R Automatic Recovery * Added the {{{ompi-migrate}}} command line tool to support the {{{crmig}}} ErrMgr component * Added CR MPI Ext functions (enable them with {{{--enable-mpi-ext=cr}}} configure option) * {{{OMPI_CR_Checkpoint}}} (Fixes trac:2342) * {{{OMPI_CR_Restart}}} * {{{OMPI_CR_Migrate}}} (may need some more work for mapping rules) * {{{OMPI_CR_INC_register_callback}}} (Fixes trac:2192) * {{{OMPI_CR_Quiesce_start}}} * {{{OMPI_CR_Quiesce_checkpoint}}} * {{{OMPI_CR_Quiesce_end}}} * {{{OMPI_CR_self_register_checkpoint_callback}}} * {{{OMPI_CR_self_register_restart_callback}}} * {{{OMPI_CR_self_register_continue_callback}}} * The ErrMgr predicted_fault() interface has been changed to take an opal_list_t of ErrMgr defined types. This will allow us to better support a wider range of fault prediction services in the future. * Add a progress meter to: * FileM rsh (filem_rsh_process_meter) * SnapC full (snapc_full_progress_meter) * SStore stage (sstore_stage_progress_meter) * Added 2 new command line options to ompi-restart * --showme : Display the full command line that would have been exec'ed. * --mpirun_opts : Command line options to pass directly to mpirun. (Fixes trac:2413) * Deprecated some MCA params: * crs_base_snapshot_dir deprecated, use sstore_stage_local_snapshot_dir * snapc_base_global_snapshot_dir deprecated, use sstore_base_global_snapshot_dir * snapc_base_global_shared deprecated, use sstore_stage_global_is_shared * snapc_base_store_in_place deprecated, replaced with different components of SStore * snapc_base_global_snapshot_ref deprecated, use sstore_base_global_snapshot_ref * snapc_base_establish_global_snapshot_dir deprecated, never well supported * snapc_full_skip_filem deprecated, use sstore_stage_skip_filem Minor Changes: -------------- * Fixes trac:1924 : {{{ompi-restart}}} now recognizes path prefixed checkpoint handles and does the right thing. * Fixes trac:2097 : {{{ompi-info}}} should now report all available CRS components * Fixes trac:2161 : Manual checkpoint movement. A user can 'mv' a checkpoint directory from the original location to another and still restart from it. * Fixes trac:2208 : Honor various TMPDIR varaibles instead of forcing {{{/tmp}}} * Move {{{ompi_cr_continue_like_restart}}} to {{{orte_cr_continue_like_restart}}} to be more flexible in where this should be set. * opal_crs_base_metadata_write* functions have been moved to SStore to support a wider range of metadata handling functionality. * Cleanup the CRS framework and components to work with the SStore framework. * Cleanup the SnapC framework and components to work with the SStore framework (cleans up these code paths considerably). * Add 'quiesce' hook to CRCP for a future enhancement. * We now require a BLCR version that supports {{{cr_request_file()}}} or {{{cr_request_checkpoint()}}} in order to make the code more maintainable. Note that {{{cr_request_file}}} has been deprecated since 0.7.0, so we prefer to use {{{cr_request_checkpoint()}}}. * Add optional application level INC callbacks (registered through the CR MPI Ext interface). * Increase the {{{opal_cr_thread_sleep_wait}}} parameter to 1000 microseconds to make the C/R thread less aggressive. * {{{opal-restart}}} now looks for cache directories before falling back on stable storage when asked. * {{{opal-restart}}} also support local decompression before restarting * {{{orte-checkpoint}}} now uses the SStore framework to work with the metadata * {{{orte-restart}}} now uses the SStore framework to work with the metadata * Remove the {{{orte-restart}}} preload option. This was removed since the user only needs to select the 'stage' component in order to support this functionality. * Since the '-am' parameter is saved in the metadata, {{{ompi-restart}}} no longer hard codes {{{-am ft-enable-cr}}}. * Fix {{{hnp}}} ErrMgr so that if a previous component in the stack has 'fixed' the problem, then it should be skipped. * Make sure to decrement the number of 'num_local_procs' in the orted when one goes away. * odls now checks the SStore framework to see if it needs to load any checkpoint files before launching (to support 'stage'). This separates the SStore logic from the --preload-[binary|files] options. * Add unique IDs to the named pipes established between the orted and the app in SnapC. This is to better support migration and automatic recovery activities. * Improve the checks for 'already checkpointing' error path. * A a recovery output timer, to show how long it takes to restart a job * Do a better job of cleaning up the old session directory on restart. * Add a local module to the autor and crmig ErrMgr components. These small modules prevent the 'orted' component from attempting a local recovery (Which does not work for MPI apps at the moment) * Add a fix for bounding the checkpointable region between MPI_Init and MPI_Finalize. This commit was SVN r23587. The following Trac tickets were found above: Ticket 1924 --> https://svn.open-mpi.org/trac/ompi/ticket/1924 Ticket 2097 --> https://svn.open-mpi.org/trac/ompi/ticket/2097 Ticket 2161 --> https://svn.open-mpi.org/trac/ompi/ticket/2161 Ticket 2192 --> https://svn.open-mpi.org/trac/ompi/ticket/2192 Ticket 2208 --> https://svn.open-mpi.org/trac/ompi/ticket/2208 Ticket 2342 --> https://svn.open-mpi.org/trac/ompi/ticket/2342 Ticket 2413 --> https://svn.open-mpi.org/trac/ompi/ticket/2413
2010-08-10 20:51:11 +00:00
/** Stable Storage Handle (must equal the global version) */
orte_sstore_base_handle_t ss_handle;
};
typedef struct orte_snapc_base_local_snapshot_1_0_0_t orte_snapc_base_local_snapshot_1_0_0_t;
typedef struct orte_snapc_base_local_snapshot_1_0_0_t orte_snapc_base_local_snapshot_t;
ORTE_DECLSPEC OBJ_CLASS_DECLARATION(orte_snapc_base_local_snapshot_t);
/**
* Definition of the global snapshot.
* Each component is assumed to have extened this definition
* in the same way they extern the orte_snapc_base_compoinent_t below.
*/
struct orte_snapc_base_global_snapshot_1_0_0_t {
/** This is an object, so must have super */
opal_list_item_t super;
/** A list of orte_snapc_base_snapshot_t's */
opal_list_t local_snapshots;
A number of C/R enhancements per RFC below: http://www.open-mpi.org/community/lists/devel/2010/07/8240.php Documentation: http://osl.iu.edu/research/ft/ Major Changes: -------------- * Added C/R-enabled Debugging support. Enabled with the --enable-crdebug flag. See the following website for more information: http://osl.iu.edu/research/ft/crdebug/ * Added Stable Storage (SStore) framework for checkpoint storage * 'central' component does a direct to central storage save * 'stage' component stages checkpoints to central storage while the application continues execution. * 'stage' supports offline compression of checkpoints before moving (sstore_stage_compress) * 'stage' supports local caching of checkpoints to improve automatic recovery (sstore_stage_caching) * Added Compression (compress) framework to support * Add two new ErrMgr recovery policies * {{{crmig}}} C/R Process Migration * {{{autor}}} C/R Automatic Recovery * Added the {{{ompi-migrate}}} command line tool to support the {{{crmig}}} ErrMgr component * Added CR MPI Ext functions (enable them with {{{--enable-mpi-ext=cr}}} configure option) * {{{OMPI_CR_Checkpoint}}} (Fixes trac:2342) * {{{OMPI_CR_Restart}}} * {{{OMPI_CR_Migrate}}} (may need some more work for mapping rules) * {{{OMPI_CR_INC_register_callback}}} (Fixes trac:2192) * {{{OMPI_CR_Quiesce_start}}} * {{{OMPI_CR_Quiesce_checkpoint}}} * {{{OMPI_CR_Quiesce_end}}} * {{{OMPI_CR_self_register_checkpoint_callback}}} * {{{OMPI_CR_self_register_restart_callback}}} * {{{OMPI_CR_self_register_continue_callback}}} * The ErrMgr predicted_fault() interface has been changed to take an opal_list_t of ErrMgr defined types. This will allow us to better support a wider range of fault prediction services in the future. * Add a progress meter to: * FileM rsh (filem_rsh_process_meter) * SnapC full (snapc_full_progress_meter) * SStore stage (sstore_stage_progress_meter) * Added 2 new command line options to ompi-restart * --showme : Display the full command line that would have been exec'ed. * --mpirun_opts : Command line options to pass directly to mpirun. (Fixes trac:2413) * Deprecated some MCA params: * crs_base_snapshot_dir deprecated, use sstore_stage_local_snapshot_dir * snapc_base_global_snapshot_dir deprecated, use sstore_base_global_snapshot_dir * snapc_base_global_shared deprecated, use sstore_stage_global_is_shared * snapc_base_store_in_place deprecated, replaced with different components of SStore * snapc_base_global_snapshot_ref deprecated, use sstore_base_global_snapshot_ref * snapc_base_establish_global_snapshot_dir deprecated, never well supported * snapc_full_skip_filem deprecated, use sstore_stage_skip_filem Minor Changes: -------------- * Fixes trac:1924 : {{{ompi-restart}}} now recognizes path prefixed checkpoint handles and does the right thing. * Fixes trac:2097 : {{{ompi-info}}} should now report all available CRS components * Fixes trac:2161 : Manual checkpoint movement. A user can 'mv' a checkpoint directory from the original location to another and still restart from it. * Fixes trac:2208 : Honor various TMPDIR varaibles instead of forcing {{{/tmp}}} * Move {{{ompi_cr_continue_like_restart}}} to {{{orte_cr_continue_like_restart}}} to be more flexible in where this should be set. * opal_crs_base_metadata_write* functions have been moved to SStore to support a wider range of metadata handling functionality. * Cleanup the CRS framework and components to work with the SStore framework. * Cleanup the SnapC framework and components to work with the SStore framework (cleans up these code paths considerably). * Add 'quiesce' hook to CRCP for a future enhancement. * We now require a BLCR version that supports {{{cr_request_file()}}} or {{{cr_request_checkpoint()}}} in order to make the code more maintainable. Note that {{{cr_request_file}}} has been deprecated since 0.7.0, so we prefer to use {{{cr_request_checkpoint()}}}. * Add optional application level INC callbacks (registered through the CR MPI Ext interface). * Increase the {{{opal_cr_thread_sleep_wait}}} parameter to 1000 microseconds to make the C/R thread less aggressive. * {{{opal-restart}}} now looks for cache directories before falling back on stable storage when asked. * {{{opal-restart}}} also support local decompression before restarting * {{{orte-checkpoint}}} now uses the SStore framework to work with the metadata * {{{orte-restart}}} now uses the SStore framework to work with the metadata * Remove the {{{orte-restart}}} preload option. This was removed since the user only needs to select the 'stage' component in order to support this functionality. * Since the '-am' parameter is saved in the metadata, {{{ompi-restart}}} no longer hard codes {{{-am ft-enable-cr}}}. * Fix {{{hnp}}} ErrMgr so that if a previous component in the stack has 'fixed' the problem, then it should be skipped. * Make sure to decrement the number of 'num_local_procs' in the orted when one goes away. * odls now checks the SStore framework to see if it needs to load any checkpoint files before launching (to support 'stage'). This separates the SStore logic from the --preload-[binary|files] options. * Add unique IDs to the named pipes established between the orted and the app in SnapC. This is to better support migration and automatic recovery activities. * Improve the checks for 'already checkpointing' error path. * A a recovery output timer, to show how long it takes to restart a job * Do a better job of cleaning up the old session directory on restart. * Add a local module to the autor and crmig ErrMgr components. These small modules prevent the 'orted' component from attempting a local recovery (Which does not work for MPI apps at the moment) * Add a fix for bounding the checkpointable region between MPI_Init and MPI_Finalize. This commit was SVN r23587. The following Trac tickets were found above: Ticket 1924 --> https://svn.open-mpi.org/trac/ompi/ticket/1924 Ticket 2097 --> https://svn.open-mpi.org/trac/ompi/ticket/2097 Ticket 2161 --> https://svn.open-mpi.org/trac/ompi/ticket/2161 Ticket 2192 --> https://svn.open-mpi.org/trac/ompi/ticket/2192 Ticket 2208 --> https://svn.open-mpi.org/trac/ompi/ticket/2208 Ticket 2342 --> https://svn.open-mpi.org/trac/ompi/ticket/2342 Ticket 2413 --> https://svn.open-mpi.org/trac/ompi/ticket/2413
2010-08-10 20:51:11 +00:00
/** Checkpoint Options */
opal_crs_base_ckpt_options_t *options;
A number of C/R enhancements per RFC below: http://www.open-mpi.org/community/lists/devel/2010/07/8240.php Documentation: http://osl.iu.edu/research/ft/ Major Changes: -------------- * Added C/R-enabled Debugging support. Enabled with the --enable-crdebug flag. See the following website for more information: http://osl.iu.edu/research/ft/crdebug/ * Added Stable Storage (SStore) framework for checkpoint storage * 'central' component does a direct to central storage save * 'stage' component stages checkpoints to central storage while the application continues execution. * 'stage' supports offline compression of checkpoints before moving (sstore_stage_compress) * 'stage' supports local caching of checkpoints to improve automatic recovery (sstore_stage_caching) * Added Compression (compress) framework to support * Add two new ErrMgr recovery policies * {{{crmig}}} C/R Process Migration * {{{autor}}} C/R Automatic Recovery * Added the {{{ompi-migrate}}} command line tool to support the {{{crmig}}} ErrMgr component * Added CR MPI Ext functions (enable them with {{{--enable-mpi-ext=cr}}} configure option) * {{{OMPI_CR_Checkpoint}}} (Fixes trac:2342) * {{{OMPI_CR_Restart}}} * {{{OMPI_CR_Migrate}}} (may need some more work for mapping rules) * {{{OMPI_CR_INC_register_callback}}} (Fixes trac:2192) * {{{OMPI_CR_Quiesce_start}}} * {{{OMPI_CR_Quiesce_checkpoint}}} * {{{OMPI_CR_Quiesce_end}}} * {{{OMPI_CR_self_register_checkpoint_callback}}} * {{{OMPI_CR_self_register_restart_callback}}} * {{{OMPI_CR_self_register_continue_callback}}} * The ErrMgr predicted_fault() interface has been changed to take an opal_list_t of ErrMgr defined types. This will allow us to better support a wider range of fault prediction services in the future. * Add a progress meter to: * FileM rsh (filem_rsh_process_meter) * SnapC full (snapc_full_progress_meter) * SStore stage (sstore_stage_progress_meter) * Added 2 new command line options to ompi-restart * --showme : Display the full command line that would have been exec'ed. * --mpirun_opts : Command line options to pass directly to mpirun. (Fixes trac:2413) * Deprecated some MCA params: * crs_base_snapshot_dir deprecated, use sstore_stage_local_snapshot_dir * snapc_base_global_snapshot_dir deprecated, use sstore_base_global_snapshot_dir * snapc_base_global_shared deprecated, use sstore_stage_global_is_shared * snapc_base_store_in_place deprecated, replaced with different components of SStore * snapc_base_global_snapshot_ref deprecated, use sstore_base_global_snapshot_ref * snapc_base_establish_global_snapshot_dir deprecated, never well supported * snapc_full_skip_filem deprecated, use sstore_stage_skip_filem Minor Changes: -------------- * Fixes trac:1924 : {{{ompi-restart}}} now recognizes path prefixed checkpoint handles and does the right thing. * Fixes trac:2097 : {{{ompi-info}}} should now report all available CRS components * Fixes trac:2161 : Manual checkpoint movement. A user can 'mv' a checkpoint directory from the original location to another and still restart from it. * Fixes trac:2208 : Honor various TMPDIR varaibles instead of forcing {{{/tmp}}} * Move {{{ompi_cr_continue_like_restart}}} to {{{orte_cr_continue_like_restart}}} to be more flexible in where this should be set. * opal_crs_base_metadata_write* functions have been moved to SStore to support a wider range of metadata handling functionality. * Cleanup the CRS framework and components to work with the SStore framework. * Cleanup the SnapC framework and components to work with the SStore framework (cleans up these code paths considerably). * Add 'quiesce' hook to CRCP for a future enhancement. * We now require a BLCR version that supports {{{cr_request_file()}}} or {{{cr_request_checkpoint()}}} in order to make the code more maintainable. Note that {{{cr_request_file}}} has been deprecated since 0.7.0, so we prefer to use {{{cr_request_checkpoint()}}}. * Add optional application level INC callbacks (registered through the CR MPI Ext interface). * Increase the {{{opal_cr_thread_sleep_wait}}} parameter to 1000 microseconds to make the C/R thread less aggressive. * {{{opal-restart}}} now looks for cache directories before falling back on stable storage when asked. * {{{opal-restart}}} also support local decompression before restarting * {{{orte-checkpoint}}} now uses the SStore framework to work with the metadata * {{{orte-restart}}} now uses the SStore framework to work with the metadata * Remove the {{{orte-restart}}} preload option. This was removed since the user only needs to select the 'stage' component in order to support this functionality. * Since the '-am' parameter is saved in the metadata, {{{ompi-restart}}} no longer hard codes {{{-am ft-enable-cr}}}. * Fix {{{hnp}}} ErrMgr so that if a previous component in the stack has 'fixed' the problem, then it should be skipped. * Make sure to decrement the number of 'num_local_procs' in the orted when one goes away. * odls now checks the SStore framework to see if it needs to load any checkpoint files before launching (to support 'stage'). This separates the SStore logic from the --preload-[binary|files] options. * Add unique IDs to the named pipes established between the orted and the app in SnapC. This is to better support migration and automatic recovery activities. * Improve the checks for 'already checkpointing' error path. * A a recovery output timer, to show how long it takes to restart a job * Do a better job of cleaning up the old session directory on restart. * Add a local module to the autor and crmig ErrMgr components. These small modules prevent the 'orted' component from attempting a local recovery (Which does not work for MPI apps at the moment) * Add a fix for bounding the checkpointable region between MPI_Init and MPI_Finalize. This commit was SVN r23587. The following Trac tickets were found above: Ticket 1924 --> https://svn.open-mpi.org/trac/ompi/ticket/1924 Ticket 2097 --> https://svn.open-mpi.org/trac/ompi/ticket/2097 Ticket 2161 --> https://svn.open-mpi.org/trac/ompi/ticket/2161 Ticket 2192 --> https://svn.open-mpi.org/trac/ompi/ticket/2192 Ticket 2208 --> https://svn.open-mpi.org/trac/ompi/ticket/2208 Ticket 2342 --> https://svn.open-mpi.org/trac/ompi/ticket/2342 Ticket 2413 --> https://svn.open-mpi.org/trac/ompi/ticket/2413
2010-08-10 20:51:11 +00:00
/** Stable Storage Handle */
orte_sstore_base_handle_t ss_handle;
};
typedef struct orte_snapc_base_global_snapshot_1_0_0_t orte_snapc_base_global_snapshot_1_0_0_t;
typedef struct orte_snapc_base_global_snapshot_1_0_0_t orte_snapc_base_global_snapshot_t;
ORTE_DECLSPEC OBJ_CLASS_DECLARATION(orte_snapc_base_global_snapshot_t);
2009-09-22 18:26:12 +00:00
struct orte_snapc_base_quiesce_1_0_0_t {
/** Parent is an object type */
opal_object_t super;
/** Current epoch */
int epoch;
/** Requested CRS */
char * crs_name;
/** Handle for reference */
char * handle;
/** snapshot list */
orte_snapc_base_global_snapshot_t *snapshot;
A number of C/R enhancements per RFC below: http://www.open-mpi.org/community/lists/devel/2010/07/8240.php Documentation: http://osl.iu.edu/research/ft/ Major Changes: -------------- * Added C/R-enabled Debugging support. Enabled with the --enable-crdebug flag. See the following website for more information: http://osl.iu.edu/research/ft/crdebug/ * Added Stable Storage (SStore) framework for checkpoint storage * 'central' component does a direct to central storage save * 'stage' component stages checkpoints to central storage while the application continues execution. * 'stage' supports offline compression of checkpoints before moving (sstore_stage_compress) * 'stage' supports local caching of checkpoints to improve automatic recovery (sstore_stage_caching) * Added Compression (compress) framework to support * Add two new ErrMgr recovery policies * {{{crmig}}} C/R Process Migration * {{{autor}}} C/R Automatic Recovery * Added the {{{ompi-migrate}}} command line tool to support the {{{crmig}}} ErrMgr component * Added CR MPI Ext functions (enable them with {{{--enable-mpi-ext=cr}}} configure option) * {{{OMPI_CR_Checkpoint}}} (Fixes trac:2342) * {{{OMPI_CR_Restart}}} * {{{OMPI_CR_Migrate}}} (may need some more work for mapping rules) * {{{OMPI_CR_INC_register_callback}}} (Fixes trac:2192) * {{{OMPI_CR_Quiesce_start}}} * {{{OMPI_CR_Quiesce_checkpoint}}} * {{{OMPI_CR_Quiesce_end}}} * {{{OMPI_CR_self_register_checkpoint_callback}}} * {{{OMPI_CR_self_register_restart_callback}}} * {{{OMPI_CR_self_register_continue_callback}}} * The ErrMgr predicted_fault() interface has been changed to take an opal_list_t of ErrMgr defined types. This will allow us to better support a wider range of fault prediction services in the future. * Add a progress meter to: * FileM rsh (filem_rsh_process_meter) * SnapC full (snapc_full_progress_meter) * SStore stage (sstore_stage_progress_meter) * Added 2 new command line options to ompi-restart * --showme : Display the full command line that would have been exec'ed. * --mpirun_opts : Command line options to pass directly to mpirun. (Fixes trac:2413) * Deprecated some MCA params: * crs_base_snapshot_dir deprecated, use sstore_stage_local_snapshot_dir * snapc_base_global_snapshot_dir deprecated, use sstore_base_global_snapshot_dir * snapc_base_global_shared deprecated, use sstore_stage_global_is_shared * snapc_base_store_in_place deprecated, replaced with different components of SStore * snapc_base_global_snapshot_ref deprecated, use sstore_base_global_snapshot_ref * snapc_base_establish_global_snapshot_dir deprecated, never well supported * snapc_full_skip_filem deprecated, use sstore_stage_skip_filem Minor Changes: -------------- * Fixes trac:1924 : {{{ompi-restart}}} now recognizes path prefixed checkpoint handles and does the right thing. * Fixes trac:2097 : {{{ompi-info}}} should now report all available CRS components * Fixes trac:2161 : Manual checkpoint movement. A user can 'mv' a checkpoint directory from the original location to another and still restart from it. * Fixes trac:2208 : Honor various TMPDIR varaibles instead of forcing {{{/tmp}}} * Move {{{ompi_cr_continue_like_restart}}} to {{{orte_cr_continue_like_restart}}} to be more flexible in where this should be set. * opal_crs_base_metadata_write* functions have been moved to SStore to support a wider range of metadata handling functionality. * Cleanup the CRS framework and components to work with the SStore framework. * Cleanup the SnapC framework and components to work with the SStore framework (cleans up these code paths considerably). * Add 'quiesce' hook to CRCP for a future enhancement. * We now require a BLCR version that supports {{{cr_request_file()}}} or {{{cr_request_checkpoint()}}} in order to make the code more maintainable. Note that {{{cr_request_file}}} has been deprecated since 0.7.0, so we prefer to use {{{cr_request_checkpoint()}}}. * Add optional application level INC callbacks (registered through the CR MPI Ext interface). * Increase the {{{opal_cr_thread_sleep_wait}}} parameter to 1000 microseconds to make the C/R thread less aggressive. * {{{opal-restart}}} now looks for cache directories before falling back on stable storage when asked. * {{{opal-restart}}} also support local decompression before restarting * {{{orte-checkpoint}}} now uses the SStore framework to work with the metadata * {{{orte-restart}}} now uses the SStore framework to work with the metadata * Remove the {{{orte-restart}}} preload option. This was removed since the user only needs to select the 'stage' component in order to support this functionality. * Since the '-am' parameter is saved in the metadata, {{{ompi-restart}}} no longer hard codes {{{-am ft-enable-cr}}}. * Fix {{{hnp}}} ErrMgr so that if a previous component in the stack has 'fixed' the problem, then it should be skipped. * Make sure to decrement the number of 'num_local_procs' in the orted when one goes away. * odls now checks the SStore framework to see if it needs to load any checkpoint files before launching (to support 'stage'). This separates the SStore logic from the --preload-[binary|files] options. * Add unique IDs to the named pipes established between the orted and the app in SnapC. This is to better support migration and automatic recovery activities. * Improve the checks for 'already checkpointing' error path. * A a recovery output timer, to show how long it takes to restart a job * Do a better job of cleaning up the old session directory on restart. * Add a local module to the autor and crmig ErrMgr components. These small modules prevent the 'orted' component from attempting a local recovery (Which does not work for MPI apps at the moment) * Add a fix for bounding the checkpointable region between MPI_Init and MPI_Finalize. This commit was SVN r23587. The following Trac tickets were found above: Ticket 1924 --> https://svn.open-mpi.org/trac/ompi/ticket/1924 Ticket 2097 --> https://svn.open-mpi.org/trac/ompi/ticket/2097 Ticket 2161 --> https://svn.open-mpi.org/trac/ompi/ticket/2161 Ticket 2192 --> https://svn.open-mpi.org/trac/ompi/ticket/2192 Ticket 2208 --> https://svn.open-mpi.org/trac/ompi/ticket/2208 Ticket 2342 --> https://svn.open-mpi.org/trac/ompi/ticket/2342 Ticket 2413 --> https://svn.open-mpi.org/trac/ompi/ticket/2413
2010-08-10 20:51:11 +00:00
/** Stable Storage Handle */
orte_sstore_base_handle_t ss_handle;
/** Stable Storage Snapshot list */
orte_sstore_base_global_snapshot_info_t *ss_snapshot;
2009-09-22 18:26:12 +00:00
/** Target Directory */
char * target_dir;
/** Command Line */
char * cmdline;
/** State of operation if checkpointing */
opal_crs_state_type_t cr_state;
/** Checkpointing? */
bool checkpointing;
/** Restarting? */
bool restarting;
A number of C/R enhancements per RFC below: http://www.open-mpi.org/community/lists/devel/2010/07/8240.php Documentation: http://osl.iu.edu/research/ft/ Major Changes: -------------- * Added C/R-enabled Debugging support. Enabled with the --enable-crdebug flag. See the following website for more information: http://osl.iu.edu/research/ft/crdebug/ * Added Stable Storage (SStore) framework for checkpoint storage * 'central' component does a direct to central storage save * 'stage' component stages checkpoints to central storage while the application continues execution. * 'stage' supports offline compression of checkpoints before moving (sstore_stage_compress) * 'stage' supports local caching of checkpoints to improve automatic recovery (sstore_stage_caching) * Added Compression (compress) framework to support * Add two new ErrMgr recovery policies * {{{crmig}}} C/R Process Migration * {{{autor}}} C/R Automatic Recovery * Added the {{{ompi-migrate}}} command line tool to support the {{{crmig}}} ErrMgr component * Added CR MPI Ext functions (enable them with {{{--enable-mpi-ext=cr}}} configure option) * {{{OMPI_CR_Checkpoint}}} (Fixes trac:2342) * {{{OMPI_CR_Restart}}} * {{{OMPI_CR_Migrate}}} (may need some more work for mapping rules) * {{{OMPI_CR_INC_register_callback}}} (Fixes trac:2192) * {{{OMPI_CR_Quiesce_start}}} * {{{OMPI_CR_Quiesce_checkpoint}}} * {{{OMPI_CR_Quiesce_end}}} * {{{OMPI_CR_self_register_checkpoint_callback}}} * {{{OMPI_CR_self_register_restart_callback}}} * {{{OMPI_CR_self_register_continue_callback}}} * The ErrMgr predicted_fault() interface has been changed to take an opal_list_t of ErrMgr defined types. This will allow us to better support a wider range of fault prediction services in the future. * Add a progress meter to: * FileM rsh (filem_rsh_process_meter) * SnapC full (snapc_full_progress_meter) * SStore stage (sstore_stage_progress_meter) * Added 2 new command line options to ompi-restart * --showme : Display the full command line that would have been exec'ed. * --mpirun_opts : Command line options to pass directly to mpirun. (Fixes trac:2413) * Deprecated some MCA params: * crs_base_snapshot_dir deprecated, use sstore_stage_local_snapshot_dir * snapc_base_global_snapshot_dir deprecated, use sstore_base_global_snapshot_dir * snapc_base_global_shared deprecated, use sstore_stage_global_is_shared * snapc_base_store_in_place deprecated, replaced with different components of SStore * snapc_base_global_snapshot_ref deprecated, use sstore_base_global_snapshot_ref * snapc_base_establish_global_snapshot_dir deprecated, never well supported * snapc_full_skip_filem deprecated, use sstore_stage_skip_filem Minor Changes: -------------- * Fixes trac:1924 : {{{ompi-restart}}} now recognizes path prefixed checkpoint handles and does the right thing. * Fixes trac:2097 : {{{ompi-info}}} should now report all available CRS components * Fixes trac:2161 : Manual checkpoint movement. A user can 'mv' a checkpoint directory from the original location to another and still restart from it. * Fixes trac:2208 : Honor various TMPDIR varaibles instead of forcing {{{/tmp}}} * Move {{{ompi_cr_continue_like_restart}}} to {{{orte_cr_continue_like_restart}}} to be more flexible in where this should be set. * opal_crs_base_metadata_write* functions have been moved to SStore to support a wider range of metadata handling functionality. * Cleanup the CRS framework and components to work with the SStore framework. * Cleanup the SnapC framework and components to work with the SStore framework (cleans up these code paths considerably). * Add 'quiesce' hook to CRCP for a future enhancement. * We now require a BLCR version that supports {{{cr_request_file()}}} or {{{cr_request_checkpoint()}}} in order to make the code more maintainable. Note that {{{cr_request_file}}} has been deprecated since 0.7.0, so we prefer to use {{{cr_request_checkpoint()}}}. * Add optional application level INC callbacks (registered through the CR MPI Ext interface). * Increase the {{{opal_cr_thread_sleep_wait}}} parameter to 1000 microseconds to make the C/R thread less aggressive. * {{{opal-restart}}} now looks for cache directories before falling back on stable storage when asked. * {{{opal-restart}}} also support local decompression before restarting * {{{orte-checkpoint}}} now uses the SStore framework to work with the metadata * {{{orte-restart}}} now uses the SStore framework to work with the metadata * Remove the {{{orte-restart}}} preload option. This was removed since the user only needs to select the 'stage' component in order to support this functionality. * Since the '-am' parameter is saved in the metadata, {{{ompi-restart}}} no longer hard codes {{{-am ft-enable-cr}}}. * Fix {{{hnp}}} ErrMgr so that if a previous component in the stack has 'fixed' the problem, then it should be skipped. * Make sure to decrement the number of 'num_local_procs' in the orted when one goes away. * odls now checks the SStore framework to see if it needs to load any checkpoint files before launching (to support 'stage'). This separates the SStore logic from the --preload-[binary|files] options. * Add unique IDs to the named pipes established between the orted and the app in SnapC. This is to better support migration and automatic recovery activities. * Improve the checks for 'already checkpointing' error path. * A a recovery output timer, to show how long it takes to restart a job * Do a better job of cleaning up the old session directory on restart. * Add a local module to the autor and crmig ErrMgr components. These small modules prevent the 'orted' component from attempting a local recovery (Which does not work for MPI apps at the moment) * Add a fix for bounding the checkpointable region between MPI_Init and MPI_Finalize. This commit was SVN r23587. The following Trac tickets were found above: Ticket 1924 --> https://svn.open-mpi.org/trac/ompi/ticket/1924 Ticket 2097 --> https://svn.open-mpi.org/trac/ompi/ticket/2097 Ticket 2161 --> https://svn.open-mpi.org/trac/ompi/ticket/2161 Ticket 2192 --> https://svn.open-mpi.org/trac/ompi/ticket/2192 Ticket 2208 --> https://svn.open-mpi.org/trac/ompi/ticket/2208 Ticket 2342 --> https://svn.open-mpi.org/trac/ompi/ticket/2342 Ticket 2413 --> https://svn.open-mpi.org/trac/ompi/ticket/2413
2010-08-10 20:51:11 +00:00
/** Migrating? */
bool migrating;
/** List of migrating processes */
int num_migrating;
opal_pointer_array_t migrating_procs;
2009-09-22 18:26:12 +00:00
};
typedef struct orte_snapc_base_quiesce_1_0_0_t orte_snapc_base_quiesce_1_0_0_t;
typedef struct orte_snapc_base_quiesce_1_0_0_t orte_snapc_base_quiesce_t;
ORTE_DECLSPEC OBJ_CLASS_DECLARATION(orte_snapc_base_quiesce_t);
A number of C/R enhancements per RFC below: http://www.open-mpi.org/community/lists/devel/2010/07/8240.php Documentation: http://osl.iu.edu/research/ft/ Major Changes: -------------- * Added C/R-enabled Debugging support. Enabled with the --enable-crdebug flag. See the following website for more information: http://osl.iu.edu/research/ft/crdebug/ * Added Stable Storage (SStore) framework for checkpoint storage * 'central' component does a direct to central storage save * 'stage' component stages checkpoints to central storage while the application continues execution. * 'stage' supports offline compression of checkpoints before moving (sstore_stage_compress) * 'stage' supports local caching of checkpoints to improve automatic recovery (sstore_stage_caching) * Added Compression (compress) framework to support * Add two new ErrMgr recovery policies * {{{crmig}}} C/R Process Migration * {{{autor}}} C/R Automatic Recovery * Added the {{{ompi-migrate}}} command line tool to support the {{{crmig}}} ErrMgr component * Added CR MPI Ext functions (enable them with {{{--enable-mpi-ext=cr}}} configure option) * {{{OMPI_CR_Checkpoint}}} (Fixes trac:2342) * {{{OMPI_CR_Restart}}} * {{{OMPI_CR_Migrate}}} (may need some more work for mapping rules) * {{{OMPI_CR_INC_register_callback}}} (Fixes trac:2192) * {{{OMPI_CR_Quiesce_start}}} * {{{OMPI_CR_Quiesce_checkpoint}}} * {{{OMPI_CR_Quiesce_end}}} * {{{OMPI_CR_self_register_checkpoint_callback}}} * {{{OMPI_CR_self_register_restart_callback}}} * {{{OMPI_CR_self_register_continue_callback}}} * The ErrMgr predicted_fault() interface has been changed to take an opal_list_t of ErrMgr defined types. This will allow us to better support a wider range of fault prediction services in the future. * Add a progress meter to: * FileM rsh (filem_rsh_process_meter) * SnapC full (snapc_full_progress_meter) * SStore stage (sstore_stage_progress_meter) * Added 2 new command line options to ompi-restart * --showme : Display the full command line that would have been exec'ed. * --mpirun_opts : Command line options to pass directly to mpirun. (Fixes trac:2413) * Deprecated some MCA params: * crs_base_snapshot_dir deprecated, use sstore_stage_local_snapshot_dir * snapc_base_global_snapshot_dir deprecated, use sstore_base_global_snapshot_dir * snapc_base_global_shared deprecated, use sstore_stage_global_is_shared * snapc_base_store_in_place deprecated, replaced with different components of SStore * snapc_base_global_snapshot_ref deprecated, use sstore_base_global_snapshot_ref * snapc_base_establish_global_snapshot_dir deprecated, never well supported * snapc_full_skip_filem deprecated, use sstore_stage_skip_filem Minor Changes: -------------- * Fixes trac:1924 : {{{ompi-restart}}} now recognizes path prefixed checkpoint handles and does the right thing. * Fixes trac:2097 : {{{ompi-info}}} should now report all available CRS components * Fixes trac:2161 : Manual checkpoint movement. A user can 'mv' a checkpoint directory from the original location to another and still restart from it. * Fixes trac:2208 : Honor various TMPDIR varaibles instead of forcing {{{/tmp}}} * Move {{{ompi_cr_continue_like_restart}}} to {{{orte_cr_continue_like_restart}}} to be more flexible in where this should be set. * opal_crs_base_metadata_write* functions have been moved to SStore to support a wider range of metadata handling functionality. * Cleanup the CRS framework and components to work with the SStore framework. * Cleanup the SnapC framework and components to work with the SStore framework (cleans up these code paths considerably). * Add 'quiesce' hook to CRCP for a future enhancement. * We now require a BLCR version that supports {{{cr_request_file()}}} or {{{cr_request_checkpoint()}}} in order to make the code more maintainable. Note that {{{cr_request_file}}} has been deprecated since 0.7.0, so we prefer to use {{{cr_request_checkpoint()}}}. * Add optional application level INC callbacks (registered through the CR MPI Ext interface). * Increase the {{{opal_cr_thread_sleep_wait}}} parameter to 1000 microseconds to make the C/R thread less aggressive. * {{{opal-restart}}} now looks for cache directories before falling back on stable storage when asked. * {{{opal-restart}}} also support local decompression before restarting * {{{orte-checkpoint}}} now uses the SStore framework to work with the metadata * {{{orte-restart}}} now uses the SStore framework to work with the metadata * Remove the {{{orte-restart}}} preload option. This was removed since the user only needs to select the 'stage' component in order to support this functionality. * Since the '-am' parameter is saved in the metadata, {{{ompi-restart}}} no longer hard codes {{{-am ft-enable-cr}}}. * Fix {{{hnp}}} ErrMgr so that if a previous component in the stack has 'fixed' the problem, then it should be skipped. * Make sure to decrement the number of 'num_local_procs' in the orted when one goes away. * odls now checks the SStore framework to see if it needs to load any checkpoint files before launching (to support 'stage'). This separates the SStore logic from the --preload-[binary|files] options. * Add unique IDs to the named pipes established between the orted and the app in SnapC. This is to better support migration and automatic recovery activities. * Improve the checks for 'already checkpointing' error path. * A a recovery output timer, to show how long it takes to restart a job * Do a better job of cleaning up the old session directory on restart. * Add a local module to the autor and crmig ErrMgr components. These small modules prevent the 'orted' component from attempting a local recovery (Which does not work for MPI apps at the moment) * Add a fix for bounding the checkpointable region between MPI_Init and MPI_Finalize. This commit was SVN r23587. The following Trac tickets were found above: Ticket 1924 --> https://svn.open-mpi.org/trac/ompi/ticket/1924 Ticket 2097 --> https://svn.open-mpi.org/trac/ompi/ticket/2097 Ticket 2161 --> https://svn.open-mpi.org/trac/ompi/ticket/2161 Ticket 2192 --> https://svn.open-mpi.org/trac/ompi/ticket/2192 Ticket 2208 --> https://svn.open-mpi.org/trac/ompi/ticket/2208 Ticket 2342 --> https://svn.open-mpi.org/trac/ompi/ticket/2342 Ticket 2413 --> https://svn.open-mpi.org/trac/ompi/ticket/2413
2010-08-10 20:51:11 +00:00
/**
* Application request for a global checkpoint related operation
*/
typedef enum {
ORTE_SNAPC_OP_NONE = 0,
ORTE_SNAPC_OP_INIT,
ORTE_SNAPC_OP_FIN,
ORTE_SNAPC_OP_FIN_ACK,
ORTE_SNAPC_OP_CHECKPOINT,
ORTE_SNAPC_OP_RESTART,
ORTE_SNAPC_OP_MIGRATE,
ORTE_SNAPC_OP_QUIESCE_START,
ORTE_SNAPC_OP_QUIESCE_CHECKPOINT,
ORTE_SNAPC_OP_QUIESCE_END
} orte_snapc_base_request_op_event_t;
struct orte_snapc_base_request_op_1_0_0_t {
/** Parent is an object type */
opal_object_t super;
/** Event to request */
orte_snapc_base_request_op_event_t event;
/** Is this request still active */
bool is_active;
/** Leader of the operation */
int leader;
/** Sequence Number */
int seq_num;
/** Global Handle */
char * global_handle;
/** Stable Storage Handle */
orte_sstore_base_handle_t ss_handle;
/** Migrating vpid list of participants */
int mig_num;
int *mig_vpids;
/** Migrating hostname preference list */
char (*mig_host_pref)[OPAL_MAX_PROCESSOR_NAME];
/** Migrating vpid preference list */
int *mig_vpid_pref;
/** Info key */
int *mig_off_node;
};
typedef struct orte_snapc_base_request_op_1_0_0_t orte_snapc_base_request_op_1_0_0_t;
typedef struct orte_snapc_base_request_op_1_0_0_t orte_snapc_base_request_op_t;
ORTE_DECLSPEC OBJ_CLASS_DECLARATION(orte_snapc_base_request_op_t);
/**
* Module initialization function.
* Returns ORTE_SUCCESS
*/
typedef int (*orte_snapc_base_module_init_fn_t)
(bool seed, bool app);
/**
* Module finalization function.
* Returns ORTE_SUCCESS
*/
typedef int (*orte_snapc_base_module_finalize_fn_t)
(void);
/**
* Setup the necessary structures for this job
* Returns ORTE_SUCCESS
*/
typedef int (*orte_snapc_base_setup_job_fn_t)
(orte_jobid_t jobid);
/**
* Setup the necessary structures for this job
* Returns ORTE_SUCCESS
*/
typedef int (*orte_snapc_base_release_job_fn_t)
(orte_jobid_t jobid);
/**
* Handle fault tolerance updates
*
* @param[in] state Fault tolerance state update
*
* @retval ORTE_SUCCESS The operation completed successfully
* @retval ORTE_ERROR An unspecifed error occurred
*/
typedef int (*orte_snapc_base_ft_event_fn_t)(int state);
2009-09-22 18:26:12 +00:00
/**
* Start a checkpoint originating from an internal source.
*
* This really only makes sense to call from an application, but in the future
* we may allow the checkpoint operation to use this function from the local
* coordinator.
*
* @param[out] epoch Epoch number to associate with this checkpoint operation
* Returns ORTE_SUCCESS
*/
typedef int (*orte_snapc_base_start_checkpoint_fn_t)
(orte_snapc_base_quiesce_t *datum);
/**
* Signal end of checkpoint epoch originating from an internal source.
*
* @param[in] epoch Epoch number to associate with this checkpoint operation
* Returns ORTE_SUCCESS
*/
typedef int (*orte_snapc_base_end_checkpoint_fn_t)
(orte_snapc_base_quiesce_t *datum);
A number of C/R enhancements per RFC below: http://www.open-mpi.org/community/lists/devel/2010/07/8240.php Documentation: http://osl.iu.edu/research/ft/ Major Changes: -------------- * Added C/R-enabled Debugging support. Enabled with the --enable-crdebug flag. See the following website for more information: http://osl.iu.edu/research/ft/crdebug/ * Added Stable Storage (SStore) framework for checkpoint storage * 'central' component does a direct to central storage save * 'stage' component stages checkpoints to central storage while the application continues execution. * 'stage' supports offline compression of checkpoints before moving (sstore_stage_compress) * 'stage' supports local caching of checkpoints to improve automatic recovery (sstore_stage_caching) * Added Compression (compress) framework to support * Add two new ErrMgr recovery policies * {{{crmig}}} C/R Process Migration * {{{autor}}} C/R Automatic Recovery * Added the {{{ompi-migrate}}} command line tool to support the {{{crmig}}} ErrMgr component * Added CR MPI Ext functions (enable them with {{{--enable-mpi-ext=cr}}} configure option) * {{{OMPI_CR_Checkpoint}}} (Fixes trac:2342) * {{{OMPI_CR_Restart}}} * {{{OMPI_CR_Migrate}}} (may need some more work for mapping rules) * {{{OMPI_CR_INC_register_callback}}} (Fixes trac:2192) * {{{OMPI_CR_Quiesce_start}}} * {{{OMPI_CR_Quiesce_checkpoint}}} * {{{OMPI_CR_Quiesce_end}}} * {{{OMPI_CR_self_register_checkpoint_callback}}} * {{{OMPI_CR_self_register_restart_callback}}} * {{{OMPI_CR_self_register_continue_callback}}} * The ErrMgr predicted_fault() interface has been changed to take an opal_list_t of ErrMgr defined types. This will allow us to better support a wider range of fault prediction services in the future. * Add a progress meter to: * FileM rsh (filem_rsh_process_meter) * SnapC full (snapc_full_progress_meter) * SStore stage (sstore_stage_progress_meter) * Added 2 new command line options to ompi-restart * --showme : Display the full command line that would have been exec'ed. * --mpirun_opts : Command line options to pass directly to mpirun. (Fixes trac:2413) * Deprecated some MCA params: * crs_base_snapshot_dir deprecated, use sstore_stage_local_snapshot_dir * snapc_base_global_snapshot_dir deprecated, use sstore_base_global_snapshot_dir * snapc_base_global_shared deprecated, use sstore_stage_global_is_shared * snapc_base_store_in_place deprecated, replaced with different components of SStore * snapc_base_global_snapshot_ref deprecated, use sstore_base_global_snapshot_ref * snapc_base_establish_global_snapshot_dir deprecated, never well supported * snapc_full_skip_filem deprecated, use sstore_stage_skip_filem Minor Changes: -------------- * Fixes trac:1924 : {{{ompi-restart}}} now recognizes path prefixed checkpoint handles and does the right thing. * Fixes trac:2097 : {{{ompi-info}}} should now report all available CRS components * Fixes trac:2161 : Manual checkpoint movement. A user can 'mv' a checkpoint directory from the original location to another and still restart from it. * Fixes trac:2208 : Honor various TMPDIR varaibles instead of forcing {{{/tmp}}} * Move {{{ompi_cr_continue_like_restart}}} to {{{orte_cr_continue_like_restart}}} to be more flexible in where this should be set. * opal_crs_base_metadata_write* functions have been moved to SStore to support a wider range of metadata handling functionality. * Cleanup the CRS framework and components to work with the SStore framework. * Cleanup the SnapC framework and components to work with the SStore framework (cleans up these code paths considerably). * Add 'quiesce' hook to CRCP for a future enhancement. * We now require a BLCR version that supports {{{cr_request_file()}}} or {{{cr_request_checkpoint()}}} in order to make the code more maintainable. Note that {{{cr_request_file}}} has been deprecated since 0.7.0, so we prefer to use {{{cr_request_checkpoint()}}}. * Add optional application level INC callbacks (registered through the CR MPI Ext interface). * Increase the {{{opal_cr_thread_sleep_wait}}} parameter to 1000 microseconds to make the C/R thread less aggressive. * {{{opal-restart}}} now looks for cache directories before falling back on stable storage when asked. * {{{opal-restart}}} also support local decompression before restarting * {{{orte-checkpoint}}} now uses the SStore framework to work with the metadata * {{{orte-restart}}} now uses the SStore framework to work with the metadata * Remove the {{{orte-restart}}} preload option. This was removed since the user only needs to select the 'stage' component in order to support this functionality. * Since the '-am' parameter is saved in the metadata, {{{ompi-restart}}} no longer hard codes {{{-am ft-enable-cr}}}. * Fix {{{hnp}}} ErrMgr so that if a previous component in the stack has 'fixed' the problem, then it should be skipped. * Make sure to decrement the number of 'num_local_procs' in the orted when one goes away. * odls now checks the SStore framework to see if it needs to load any checkpoint files before launching (to support 'stage'). This separates the SStore logic from the --preload-[binary|files] options. * Add unique IDs to the named pipes established between the orted and the app in SnapC. This is to better support migration and automatic recovery activities. * Improve the checks for 'already checkpointing' error path. * A a recovery output timer, to show how long it takes to restart a job * Do a better job of cleaning up the old session directory on restart. * Add a local module to the autor and crmig ErrMgr components. These small modules prevent the 'orted' component from attempting a local recovery (Which does not work for MPI apps at the moment) * Add a fix for bounding the checkpointable region between MPI_Init and MPI_Finalize. This commit was SVN r23587. The following Trac tickets were found above: Ticket 1924 --> https://svn.open-mpi.org/trac/ompi/ticket/1924 Ticket 2097 --> https://svn.open-mpi.org/trac/ompi/ticket/2097 Ticket 2161 --> https://svn.open-mpi.org/trac/ompi/ticket/2161 Ticket 2192 --> https://svn.open-mpi.org/trac/ompi/ticket/2192 Ticket 2208 --> https://svn.open-mpi.org/trac/ompi/ticket/2208 Ticket 2342 --> https://svn.open-mpi.org/trac/ompi/ticket/2342 Ticket 2413 --> https://svn.open-mpi.org/trac/ompi/ticket/2413
2010-08-10 20:51:11 +00:00
/**
* Request a checkpoint related operation to take place
*/
typedef int (*orte_snapc_base_request_op_fn_t)
(orte_snapc_base_request_op_t *datum);
/**
* Structure for SNAPC components.
*/
struct orte_snapc_base_component_2_0_0_t {
/** MCA base component */
mca_base_component_t base_version;
/** MCA base data */
mca_base_component_data_t base_data;
/** Verbosity Level */
int verbose;
/** Output Handle for opal_output */
int output_handle;
/** Default Priority */
int priority;
};
typedef struct orte_snapc_base_component_2_0_0_t orte_snapc_base_component_2_0_0_t;
typedef struct orte_snapc_base_component_2_0_0_t orte_snapc_base_component_t;
/**
* Structure for SNAPC modules
*/
struct orte_snapc_base_module_1_0_0_t {
/** Initialization Function */
orte_snapc_base_module_init_fn_t snapc_init;
/** Finalization Function */
orte_snapc_base_module_finalize_fn_t snapc_finalize;
/** Setup structures for a job */
orte_snapc_base_setup_job_fn_t setup_job;
/** Release job */
orte_snapc_base_release_job_fn_t release_job;
/** Handle any FT Notifications */
orte_snapc_base_ft_event_fn_t ft_event;
2009-09-22 18:26:12 +00:00
/** Handle internal request for checkpoint */
orte_snapc_base_start_checkpoint_fn_t start_ckpt;
orte_snapc_base_end_checkpoint_fn_t end_ckpt;
A number of C/R enhancements per RFC below: http://www.open-mpi.org/community/lists/devel/2010/07/8240.php Documentation: http://osl.iu.edu/research/ft/ Major Changes: -------------- * Added C/R-enabled Debugging support. Enabled with the --enable-crdebug flag. See the following website for more information: http://osl.iu.edu/research/ft/crdebug/ * Added Stable Storage (SStore) framework for checkpoint storage * 'central' component does a direct to central storage save * 'stage' component stages checkpoints to central storage while the application continues execution. * 'stage' supports offline compression of checkpoints before moving (sstore_stage_compress) * 'stage' supports local caching of checkpoints to improve automatic recovery (sstore_stage_caching) * Added Compression (compress) framework to support * Add two new ErrMgr recovery policies * {{{crmig}}} C/R Process Migration * {{{autor}}} C/R Automatic Recovery * Added the {{{ompi-migrate}}} command line tool to support the {{{crmig}}} ErrMgr component * Added CR MPI Ext functions (enable them with {{{--enable-mpi-ext=cr}}} configure option) * {{{OMPI_CR_Checkpoint}}} (Fixes trac:2342) * {{{OMPI_CR_Restart}}} * {{{OMPI_CR_Migrate}}} (may need some more work for mapping rules) * {{{OMPI_CR_INC_register_callback}}} (Fixes trac:2192) * {{{OMPI_CR_Quiesce_start}}} * {{{OMPI_CR_Quiesce_checkpoint}}} * {{{OMPI_CR_Quiesce_end}}} * {{{OMPI_CR_self_register_checkpoint_callback}}} * {{{OMPI_CR_self_register_restart_callback}}} * {{{OMPI_CR_self_register_continue_callback}}} * The ErrMgr predicted_fault() interface has been changed to take an opal_list_t of ErrMgr defined types. This will allow us to better support a wider range of fault prediction services in the future. * Add a progress meter to: * FileM rsh (filem_rsh_process_meter) * SnapC full (snapc_full_progress_meter) * SStore stage (sstore_stage_progress_meter) * Added 2 new command line options to ompi-restart * --showme : Display the full command line that would have been exec'ed. * --mpirun_opts : Command line options to pass directly to mpirun. (Fixes trac:2413) * Deprecated some MCA params: * crs_base_snapshot_dir deprecated, use sstore_stage_local_snapshot_dir * snapc_base_global_snapshot_dir deprecated, use sstore_base_global_snapshot_dir * snapc_base_global_shared deprecated, use sstore_stage_global_is_shared * snapc_base_store_in_place deprecated, replaced with different components of SStore * snapc_base_global_snapshot_ref deprecated, use sstore_base_global_snapshot_ref * snapc_base_establish_global_snapshot_dir deprecated, never well supported * snapc_full_skip_filem deprecated, use sstore_stage_skip_filem Minor Changes: -------------- * Fixes trac:1924 : {{{ompi-restart}}} now recognizes path prefixed checkpoint handles and does the right thing. * Fixes trac:2097 : {{{ompi-info}}} should now report all available CRS components * Fixes trac:2161 : Manual checkpoint movement. A user can 'mv' a checkpoint directory from the original location to another and still restart from it. * Fixes trac:2208 : Honor various TMPDIR varaibles instead of forcing {{{/tmp}}} * Move {{{ompi_cr_continue_like_restart}}} to {{{orte_cr_continue_like_restart}}} to be more flexible in where this should be set. * opal_crs_base_metadata_write* functions have been moved to SStore to support a wider range of metadata handling functionality. * Cleanup the CRS framework and components to work with the SStore framework. * Cleanup the SnapC framework and components to work with the SStore framework (cleans up these code paths considerably). * Add 'quiesce' hook to CRCP for a future enhancement. * We now require a BLCR version that supports {{{cr_request_file()}}} or {{{cr_request_checkpoint()}}} in order to make the code more maintainable. Note that {{{cr_request_file}}} has been deprecated since 0.7.0, so we prefer to use {{{cr_request_checkpoint()}}}. * Add optional application level INC callbacks (registered through the CR MPI Ext interface). * Increase the {{{opal_cr_thread_sleep_wait}}} parameter to 1000 microseconds to make the C/R thread less aggressive. * {{{opal-restart}}} now looks for cache directories before falling back on stable storage when asked. * {{{opal-restart}}} also support local decompression before restarting * {{{orte-checkpoint}}} now uses the SStore framework to work with the metadata * {{{orte-restart}}} now uses the SStore framework to work with the metadata * Remove the {{{orte-restart}}} preload option. This was removed since the user only needs to select the 'stage' component in order to support this functionality. * Since the '-am' parameter is saved in the metadata, {{{ompi-restart}}} no longer hard codes {{{-am ft-enable-cr}}}. * Fix {{{hnp}}} ErrMgr so that if a previous component in the stack has 'fixed' the problem, then it should be skipped. * Make sure to decrement the number of 'num_local_procs' in the orted when one goes away. * odls now checks the SStore framework to see if it needs to load any checkpoint files before launching (to support 'stage'). This separates the SStore logic from the --preload-[binary|files] options. * Add unique IDs to the named pipes established between the orted and the app in SnapC. This is to better support migration and automatic recovery activities. * Improve the checks for 'already checkpointing' error path. * A a recovery output timer, to show how long it takes to restart a job * Do a better job of cleaning up the old session directory on restart. * Add a local module to the autor and crmig ErrMgr components. These small modules prevent the 'orted' component from attempting a local recovery (Which does not work for MPI apps at the moment) * Add a fix for bounding the checkpointable region between MPI_Init and MPI_Finalize. This commit was SVN r23587. The following Trac tickets were found above: Ticket 1924 --> https://svn.open-mpi.org/trac/ompi/ticket/1924 Ticket 2097 --> https://svn.open-mpi.org/trac/ompi/ticket/2097 Ticket 2161 --> https://svn.open-mpi.org/trac/ompi/ticket/2161 Ticket 2192 --> https://svn.open-mpi.org/trac/ompi/ticket/2192 Ticket 2208 --> https://svn.open-mpi.org/trac/ompi/ticket/2208 Ticket 2342 --> https://svn.open-mpi.org/trac/ompi/ticket/2342 Ticket 2413 --> https://svn.open-mpi.org/trac/ompi/ticket/2413
2010-08-10 20:51:11 +00:00
/** Handle a checkpoint related request */
orte_snapc_base_request_op_fn_t request_op;
};
typedef struct orte_snapc_base_module_1_0_0_t orte_snapc_base_module_1_0_0_t;
typedef struct orte_snapc_base_module_1_0_0_t orte_snapc_base_module_t;
ORTE_DECLSPEC extern orte_snapc_base_module_t orte_snapc;
2009-09-22 18:26:12 +00:00
ORTE_DECLSPEC extern orte_snapc_base_component_t orte_snapc_base_selected_component;
/**
* Macro for use in components that are of type SNAPC
*/
#define ORTE_SNAPC_BASE_VERSION_2_0_0 \
ORTE_MCA_BASE_VERSION_2_1_0("snapc", 2, 0, 0)
END_C_DECLS
#endif /* ORTE_SNAPC_H */