ports/openmpi
ports/openmpi
1
1
Форкнуть 0
Код Релизы Активность
99f7096031
openmpi/orte/orted/orted_main.c

920 строки
34 KiB
C
Исходник Обычный вид История

Move the registration of MCA params out of the init of the var system - put them in with the rest of the OPAL MCA param registrations Take another shot at untangling the spaghetti orterun: fix for command line parsing orte-submit calls opal_init_util () before parsing out MCA command line options (-mca, -am, etc). This prevents mpirun from setting opal MCA variables for some frameworks as well as the MCA base. This is because when a framework is opened all of its variables are set to read-only. Eventually we want to lift this restriction on some MCA variables but since -mca is affected we must parse out the MCA command line options before opal_init_util(). This commit fixes the bug by adding a new option to opal_cmd_line_parse (ignore unknown option) so orte-submit can pre-parse the command line for MCA options. Signed-off-by: Nathan Hjelm <hjelmn@me.com> Minor cleanups to avoid releasing/recreating the cmd line
2016-05-07 14:12:01 +03:00
/* -*- Mode: C; c-basic-offset:4 ; indent-tabs-mode:nil -*- */
Reorganize the orted code for easier maintenance. Add ability to deliver xcast messages to local procs (not used at this point). This commit was SVN r14474.
2007-04-23 22:28:20 +04:00
/*
Fix the configure logic for --with-ft so that it properly takes a comma separated list. Many of the OPAL_ENABLE_FT should be OPAL_ENABLE_FT_CR, so fix those. The OPAL Layer INC should call opal_output on restart so that it can refresh the string it prints to reflect the current pid/hostname which may have changed. This commit was SVN r22824.
2010-03-13 02:57:50 +03:00
* Copyright (c) 2004-2010 The Trustees of Indiana University and Indiana
Reorganize the orted code for easier maintenance. Add ability to deliver xcast messages to local procs (not used at this point). This commit was SVN r14474.
2007-04-23 22:28:20 +04:00
* University Research and Technology
* Corporation. All rights reserved.
Add a resilience to ORTE. Allows the runtime to continue after a process (or ORTED) failure. Note that more work will be necessary to allow the MPI layer to take advantage of this. Per RFC: http://www.open-mpi.org/community/lists/devel/2011/06/9299.php This commit was SVN r24815.
2011-06-24 00:38:02 +04:00
* Copyright (c) 2004-2011 The University of Tennessee and The University
Reorganize the orted code for easier maintenance. Add ability to deliver xcast messages to local procs (not used at this point). This commit was SVN r14474.
2007-04-23 22:28:20 +04:00
* of Tennessee Research Foundation. All rights
* reserved.
* Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
* University of Stuttgart. All rights reserved.
* Copyright (c) 2004-2005 The Regents of the University of California.
* All rights reserved.
Remove a bunch of dead code: gcc 4.7 warns of set-but-unused variables. So get rid of them. This commit was SVN r28538.
2013-05-18 01:45:49 +04:00
* Copyright (c) 2007-2013 Cisco Systems, Inc. All rights reserved.
Move the registration of MCA params out of the init of the var system - put them in with the rest of the OPAL MCA param registrations Take another shot at untangling the spaghetti orterun: fix for command line parsing orte-submit calls opal_init_util () before parsing out MCA command line options (-mca, -am, etc). This prevents mpirun from setting opal MCA variables for some frameworks as well as the MCA base. This is because when a framework is opened all of its variables are set to read-only. Eventually we want to lift this restriction on some MCA variables but since -mca is affected we must parse out the MCA command line options before opal_init_util(). This commit fixes the bug by adding a new option to opal_cmd_line_parse (ignore unknown option) so orte-submit can pre-parse the command line for MCA options. Signed-off-by: Nathan Hjelm <hjelmn@me.com> Minor cleanups to avoid releasing/recreating the cmd line
2016-05-07 14:12:01 +03:00
* Copyright (c) 2007-2016 Los Alamos National Security, LLC. All rights
Purge whitespace from the repo
2015-06-24 06:59:57 +03:00
* reserved.
Repair the tree spawn. The problem seems to come from the fact that now the HNP send the messages using the routed component. In the case of tree spawn, when a intermediary node spawn a child it doesn't know how to forward a message to it, so when the node-map message is coming from the HNP (as there is nothing yet in the contact/routing table) the message is sent back the way it came. As a result the node-map message keeps jumping between the HNP and the first level orteds. The solution is to add a new option to the children orte_parent_uri, which is only set when the orted is _not_ directly spawned by the HNP. When this option is present on the argument list, the orted will add the parent to its routing, and force the parent to update his routes (by sending the URI). With this approach, the routing tree is build in same time as the processes are spawned, and all messages from the HNP can be routed to the leaves. However, this is far from an optimal solution. Right now, this so called tree spawn, only spawn the children in a tree without doing anything about the "connect back to the HNP" step. The HNP is flooded with reports from all the orted. The total number of messages is higher than in the non tree startup scheme, so we do not expect this approach to be scalable in the current incarnation. A complete overhaul of the tree startup is required in order improve the scalability. Stay tuned! This commit was SVN r21504.
2009-06-24 02:10:25 +04:00
* Copyright (c) 2009 Institut National de Recherche en Informatique
* et Automatique. All rights reserved.
Purge whitespace from the repo
2015-06-24 06:59:57 +03:00
* Copyright (c) 2010 Oracle and/or its affiliates. All rights reserved.
Further enhance the support for Singularity containers. Extend the "personality" command-line option to allow specifying both model (e.g., "ompi") and container (e.g., "singularity"), and add the necessary logic to support multiple options. Add a new pmix "isolated" component to handle singletons where no HNP is available since containers cannot launch the HNP.
2016-02-17 19:32:17 +03:00
* Copyright (c) 2013-2016 Intel, Inc. All rights reserved.
orte/orted: fix misc memory leak as reported by Coverity with CID 743448
2015-06-03 07:58:07 +03:00
* Copyright (c) 2015 Research Organization for Information Science
* and Technology (RIST). All rights reserved.
Reorganize the orted code for easier maintenance. Add ability to deliver xcast messages to local procs (not used at this point). This commit was SVN r14474.
2007-04-23 22:28:20 +04:00
* $COPYRIGHT$
*
* Additional copyrights may follow
*
* $HEADER$
*/
#include "orte_config.h"
Start reducing our dependency on the event library by removing at least one instance where we use it to redirect the program counter. Rolf reported occasional hangs of mpirun in very specific circumstances after all daemons were done. A review of MTT results indicates this may have been happening more generally in a small fraction of cases. The problem was tracked to use of the grpcomm.onesided_barrier to control daemon/mpirun termination. This relied on messaging -and- required that the program counter jump from the errmgr back to grpcomm. On rare occasions, this jump did not occur, causing mpirun to hang. This patch looks more invasive than it is - most of the affected files simply had one or two lines removed. The essence of the change is: * pulled the job_complete and quit routines out of orterun and orted_main and put them in a common place * modified the errmgr to directly call the new routines when termination is detected * removed the grpcomm.onesided_barrier and its associated RML tag * add a new "num_routes" API to the routed framework that reports back the number of dependent routes. When route_lost is called, the daemon's list of "children" is checked and adjusted if that route went to a "leaf" in the routing tree * use connection termination between daemons to track rollup of the daemon tree. Daemons and HNP now terminate once num_routes returns zero Also picked up in this commit is the addition of a new bool flag to the app_context struct, and increasing the job_control field from 8 to 16 bits. Both trivial. This commit was SVN r23429.
2010-07-18 01:03:27 +04:00
#include "orte/constants.h"
- Get pgcc on XT to complain less: In case we use memcmp, strlen, strup and friends include <string.h> Also several constants.h are not included directly - Let's have mca_topo_base_cart_create return ompi-errors in ompi/mca/topo/base/topo_base_cart_create.c This commit was SVN r20773.
2009-03-13 05:10:32 +03:00
#include <string.h>
Reorganize the orted code for easier maintenance. Add ability to deliver xcast messages to local procs (not used at this point). This commit was SVN r14474.
2007-04-23 22:28:20 +04:00
#include <stdio.h>
#include <ctype.h>
#ifdef HAVE_UNISTD_H
#include <unistd.h>
#endif
#ifdef HAVE_NETDB_H
#include <netdb.h>
#endif
#ifdef HAVE_SYS_PARAM_H
#include <sys/param.h>
#endif
#include <fcntl.h>
#include <errno.h>
#include <signal.h>
Continue to improve timing instrumentation. Add ability to store timing data directly to a file instead of just to stdout. This commit was SVN r20229.
2009-01-08 17:27:52 +03:00
#ifdef HAVE_SYS_TIME_H
#include <sys/time.h>
#endif /* HAVE_SYS_TIME_H */
Reorganize the orted code for easier maintenance. Add ability to deliver xcast messages to local procs (not used at this point). This commit was SVN r14474.
2007-04-23 22:28:20 +04:00
Update libevent to the 2.0 series, currently at 2.0.7rc. We will update to their final release when it becomes available. Currently known errors exist in unused portions of the libevent code. This revision passes the IBM test suite on a Linux machine and on a standalone Mac. This is a fairly intrusive change, but outside of the moving of opal/event to opal/mca/event, the only changes involved (a) changing all calls to opal_event functions to reflect the new framework instead, and (b) ensuring that all opal_event_t objects are properly constructed since they are now true opal_objects. Note: Shiqing has just returned from vacation and has not yet had a chance to complete the Windows integration. Thus, this commit almost certainly breaks Windows support on the trunk. However, I want this to have a chance to soak for as long as possible before I become less available a week from today (going to be at a class for 5 days, and thus will only be sparingly available) so we can find and fix any problems. Biggest change is moving the libevent code from opal/event to a new opal/mca/event framework. This was done to make it much easier to update libevent in the future. New versions can be inserted as a new component and tested in parallel with the current version until validated, then we can remove the earlier version if we so choose. This is a statically built framework ala installdirs, so only one component will build at a time. There is no selection logic - the sole compiled component simply loads its function pointers into the opal_event struct. I have gone thru the code base and converted all the libevent calls I could find. However, I cannot compile nor test every environment. It is therefore quite likely that errors remain in the system. Please keep an eye open for two things: 1. compile-time errors: these will be obvious as calls to the old functions (e.g., opal_evtimer_new) must be replaced by the new framework APIs (e.g., opal_event.evtimer_new) 2. run-time errors: these will likely show up as segfaults due to missing constructors on opal_event_t objects. It appears that it became a typical practice for people to "init" an opal_event_t by simply using memset to zero it out. This will no longer work - you must either OBJ_NEW or OBJ_CONSTRUCT an opal_event_t. I tried to catch these cases, but may have missed some. Believe me, you'll know when you hit it. There is also the issue of the new libevent "no recursion" behavior. As I described on a recent email, we will have to discuss this and figure out what, if anything, we need to do. This commit was SVN r23925.
2010-10-24 22:35:54 +04:00
#include "opal/mca/event/event.h"
Reorganize the orted code for easier maintenance. Add ability to deliver xcast messages to local procs (not used at this point). This commit was SVN r14474.
2007-04-23 22:28:20 +04:00
#include "opal/mca/base/base.h"
- On the way to get the BTLs split out and lessen dependency on orte: Often, orte/util/show_help.h is included, although no functionality is required -- instead, most often opal_output.h, or orte/mca/rml/rml_types.h Please see orte_show_help_replacement.sh commited next. - Local compilation (Linux/x86_64) w/ -Wimplicit-function-declaration actually showed two *missing* #include "orte/util/show_help.h" in orte/mca/odls/base/odls_base_default_fns.c and in orte/tools/orte-top/orte-top.c Manually added these. Let's have MTT the last word. This commit was SVN r20557.
2009-02-14 05:26:12 +03:00
#include "opal/util/output.h"
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
#include "opal/util/cmd_line.h"
Add an MCA param to retain all aliases based on IP addrs for node names so that procs can look them up by interface, if desired. If the param is set, pass aliases around to all daemons and procs for local use This commit was SVN r27619.
2012-11-16 08:04:29 +04:00
#include "opal/util/if.h"
In order to properly connect to debuggers like STAT, we need to get the hostname in its unstripped version for the MPIR_proctab. Unfortunately, we need a stripped version for Cray's alps launcher. So when we are stripping the hostname prefix, retain alias hostnames and add the ability to specify an alias to use in the proctab. This commit was SVN r27863.
2013-01-18 09:00:05 +04:00
#include "opal/util/net.h"
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
#include "opal/util/opal_environ.h"
#include "opal/util/os_path.h"
#include "opal/util/printf.h"
#include "opal/util/argv.h"
#include "opal/runtime/opal.h"
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-28 01:09:41 +04:00
#include "opal/mca/base/mca_base_var.h"
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
#include "opal/util/daemon_init.h"
#include "opal/dss/dss.h"
Per the RFC from Jeff, move hwloc from opal/mca/common to its own static framework ala libevent. Have ORTE daemons collect the topology info at startup and, if --enable-hwloc-xml is set, send that info back to the HNP for later use. The HNP only retains unique topology "templates" to reduce memory footprint. Have the daemon include the local topology info in the nidmap buffer sent to each app so the apps don't all hammer the local system to discover it for themselves. Remove the sysinfo framework as hwloc replaces that functionality. This commit was SVN r25124.
2011-09-11 23:02:24 +04:00
#include "opal/mca/hwloc/hwloc.h"
Integrate PMIx 1.0 with OMPI. Bring Slurm PMI-1 component online Bring the s2 component online Little cleanup - let the various PMIx modules set the process name during init, and then just raise it up to the ORTE level. Required as the different PMI environments all pass the jobid in different ways. Bring the OMPI pubsub/pmi component online Get comm_spawn working again Ensure we always provide a cpuset, even if it is NULL pmix/cray: adjust cray pmix component for pmix Make changes so cray pmix can work within the integrated ompi/pmix framework. Bring singletons back online. Implement the comm_spawn operation using pmix - not tested yet Cleanup comm_spawn - procs now starting, error in connect_accept Complete integration
2015-06-18 19:53:20 +03:00
#include "opal/mca/pmix/pmix.h"
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
Effectively revert the orte_output system and return to direct use of opal_output at all levels. Retain the orte_show_help subsystem to allow aggregation of show_help messages at the HNP. After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach. I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive. This commit was SVN r18619.
2008-06-09 18:53:58 +04:00
#include "orte/util/show_help.h"
Reorganize the orted code for easier maintenance. Add ability to deliver xcast messages to local procs (not used at this point). This commit was SVN r14474.
2007-04-23 22:28:20 +04:00
#include "orte/util/proc_info.h"
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
#include "orte/util/session_dir.h"
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
#include "orte/util/name_fns.h"
Expand the ESS framework's API to include a new function "query_sys_info" that allows the caller to retrieve key-value pairs of info on the local system capabilities (e.g., cpu type/model). Have each daemon and the HNP "sense" that information and provide it to their local procs to avoid having every proc querying the system directly. This commit was SVN r22870.
2010-03-23 23:47:41 +03:00
#include "orte/util/nidmap.h"
Okay, since a certain other RM out there made a fuss about being able to lock their daemons to specified cores, offer the same option here. The MCA param orte_daemon_cores can be used to specify which core(s) you want the orte daemons to use. This will have no bearing on the application procs - unbound will remain unbound, and binding directives will be applied to the apps. Yippee skippee... This commit was SVN r30513.
2014-01-31 03:50:14 +04:00
#include "orte/util/parse_options.h"
Repair the tree spawn. The problem seems to come from the fact that now the HNP send the messages using the routed component. In the case of tree spawn, when a intermediary node spawn a child it doesn't know how to forward a message to it, so when the node-map message is coming from the HNP (as there is nothing yet in the contact/routing table) the message is sent back the way it came. As a result the node-map message keeps jumping between the HNP and the first level orteds. The solution is to add a new option to the children orte_parent_uri, which is only set when the orted is _not_ directly spawned by the HNP. When this option is present on the argument list, the orted will add the parent to its routing, and force the parent to update his routes (by sending the URI). With this approach, the routing tree is build in same time as the processes are spawned, and all messages from the HNP can be routed to the leaves. However, this is far from an optimal solution. Right now, this so called tree spawn, only spawn the children in a tree without doing anything about the "connect back to the HNP" step. The HNP is flooded with reports from all the orted. The total number of messages is higher than in the non tree startup scheme, so we do not expect this approach to be scalable in the current incarnation. A complete overhaul of the tree startup is required in order improve the scalability. Stay tuned! This commit was SVN r21504.
2009-06-24 02:10:25 +04:00
#include "orte/mca/rml/base/rml_contact.h"
Reorganize the orted code for easier maintenance. Add ability to deliver xcast messages to local procs (not used at this point). This commit was SVN r14474.
2007-04-23 22:28:20 +04:00
#include "orte/mca/errmgr/errmgr.h"
Sorry for mid-day commit, but I had promised on the call to do this upon my return. Roll in the ORTE state machine. Remove last traces of opal_sos. Remove UTK epoch code. Please see the various emails about the state machine change for details. I'll send something out later with more info on the new arch. This commit was SVN r26242.
2012-04-06 18:23:13 +04:00
#include "orte/mca/ess/ess.h"
Take the next step towards fully utilizing static ports for the daemons to eliminate the initial "phone home" to mpirun by modifying the orted termination procedure to eliminate the need for a full barrier-like operation. Instead, we add a "onesided" barrier to the grpcomm framework API that releases the orted once it has completed its own contribution to the barrier - i.e., the orteds now exit as the "ack" message rolls up towards mpirun instead of sending the "ack" directly to mpirun. This causes the orteds in the routing tree to remain alive until all termination "acks" from orteds below them have passed through. Thus, if we use static ports, we no longer require a direct orted-to-mpirun connection. Also modify the binomial routed module so it conforms to what all the other routed modules do and have all messages pass along the routing tree instead of short-circuiting between orteds. This further reduces the number of ports being opened on backend nodes. This commit was SVN r21203.
2009-05-11 18:11:44 +04:00
#include "orte/mca/grpcomm/grpcomm.h"
Some minor cleanups. Get singletons working. Cleanup abort handling so it gets properly identified. This commit was SVN r26261.
2012-04-10 23:08:54 +04:00
#include "orte/mca/grpcomm/base/base.h"
Reorganize the orted code for easier maintenance. Add ability to deliver xcast messages to local procs (not used at this point). This commit was SVN r14474.
2007-04-23 22:28:20 +04:00
#include "orte/mca/rml/rml.h"
- On the way to get the BTLs split out and lessen dependency on orte: Often, orte/util/show_help.h is included, although no functionality is required -- instead, most often opal_output.h, or orte/mca/rml/rml_types.h Please see orte_show_help_replacement.sh commited next. - Local compilation (Linux/x86_64) w/ -Wimplicit-function-declaration actually showed two *missing* #include "orte/util/show_help.h" in orte/mca/odls/base/odls_base_default_fns.c and in orte/tools/orte-top/orte-top.c Manually added these. Let's have MTT the last word. This commit was SVN r20557.
2009-02-14 05:26:12 +03:00
#include "orte/mca/rml/rml_types.h"
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
#include "orte/mca/odls/odls.h"
Expand the ESS framework's API to include a new function "query_sys_info" that allows the caller to retrieve key-value pairs of info on the local system capabilities (e.g., cpu type/model). Have each daemon and the HNP "sense" that information and provide it to their local procs to avoid having every proc querying the system directly. This commit was SVN r22870.
2010-03-23 23:47:41 +03:00
#include "orte/mca/odls/base/odls_private.h"
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
#include "orte/mca/plm/plm.h"
#include "orte/mca/ras/ras.h"
Add a binomial tree-based launch to ssh, turned "on" only when the plm_rsh_tree_spawned mca param is set to a non-zero value. This probably isn't a very optimized capability, but it does execute a tree-based launch that may scale better than linear at high node counts. Add the daemon map capability to the ODLS to create and save a map of daemon vpid vs nodename from the launch message. Cleanup a few places in the base plm launch support where we didn't adequately protect rml recv's from potentially executing sends. This commit was SVN r18143.
2008-04-14 22:26:08 +04:00
#include "orte/mca/routed/routed.h"
Fix singleton comm_spawn by having the host orted create a map object for the singleton job. Even though this isn't filled in, the pidmap function will ignore any job that doesn't have a map object. Thus, this ensures that the singleton's location is included in the pidmap, thereby allowing messages to be routed to/from it. This commit was SVN r23430.
2010-07-18 06:48:17 +04:00
#include "orte/mca/rmaps/rmaps_types.h"
Sorry for mid-day commit, but I had promised on the call to do this upon my return. Roll in the ORTE state machine. Remove last traces of opal_sos. Remove UTK epoch code. Please see the various emails about the state machine change for details. I'll send something out later with more info on the new arch. This commit was SVN r26242.
2012-04-06 18:23:13 +04:00
#include "orte/mca/state/state.h"
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
/* need access to the create_jobid fn used by plm components
* so we can set singleton name, if necessary
*/
#include "orte/mca/plm/base/plm_private.h"
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
#include "orte/runtime/runtime.h"
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
#include "orte/runtime/orte_globals.h"
Start reducing our dependency on the event library by removing at least one instance where we use it to redirect the program counter. Rolf reported occasional hangs of mpirun in very specific circumstances after all daemons were done. A review of MTT results indicates this may have been happening more generally in a small fraction of cases. The problem was tracked to use of the grpcomm.onesided_barrier to control daemon/mpirun termination. This relied on messaging -and- required that the program counter jump from the errmgr back to grpcomm. On rare occasions, this jump did not occur, causing mpirun to hang. This patch looks more invasive than it is - most of the affected files simply had one or two lines removed. The essence of the change is: * pulled the job_complete and quit routines out of orterun and orted_main and put them in a common place * modified the errmgr to directly call the new routines when termination is detected * removed the grpcomm.onesided_barrier and its associated RML tag * add a new "num_routes" API to the routed framework that reports back the number of dependent routes. When route_lost is called, the daemon's list of "children" is checked and adjusted if that route went to a "leaf" in the routing tree * use connection termination between daemons to track rollup of the daemon tree. Daemons and HNP now terminate once num_routes returns zero Also picked up in this commit is the addition of a new bool flag to the app_context struct, and increasing the job_control field from 8 to 16 bits. Both trivial. This commit was SVN r23429.
2010-07-18 01:03:27 +04:00
#include "orte/runtime/orte_locks.h"
#include "orte/runtime/orte_quit.h"
This isn't as big a change as it appears - a change in one place caused a whole bunch of files to require updated #include's due to some arcane linkage. Rework the orte_wait code to reflect the introduction of the state machine. If we are in cleanup mode and just want to kill all our local children, then there is no reason to be polite about it as that introduces *very* long delays at scale. Just kill the procs and move on. Refs trac:4717 This commit was SVN r32019. The following Trac tickets were found above: Ticket 4717 --> https://svn.open-mpi.org/trac/ompi/ticket/4717
2014-06-17 21:57:51 +04:00
#include "orte/runtime/orte_wait.h"
Reorganize the orted code for easier maintenance. Add ability to deliver xcast messages to local procs (not used at this point). This commit was SVN r14474.
2007-04-23 22:28:20 +04:00
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
#include "orte/orted/orted.h"
Per the PMIx RFC: WHAT: Merge the PMIx branch into the devel repo, creating a new OPAL “lmix” framework to abstract PMI support for all RTEs. Replace the ORTE daemon-level collectives with a new PMIx server and update the ORTE grpcomm framework to support server-to-server collectives WHY: We’ve had problems dealing with variations in PMI implementations, and need to extend the existing PMI definitions to meet exascale requirements. WHEN: Mon, Aug 25 WHERE: https://github.com/rhc54/ompi-svn-mirror.git Several community members have been working on a refactoring of the current PMI support within OMPI. Although the APIs are common, Slurm and Cray implement a different range of capabilities, and package them differently. For example, Cray provides an integrated PMI-1/2 library, while Slurm separates the two and requires the user to specify the one to be used at runtime. In addition, several bugs in the Slurm implementations have caused problems requiring extra coding. All this has led to a slew of #if’s in the PMI code and bugs when the corner-case logic for one implementation accidentally traps the other. Extending this support to other implementations would have increased this complexity to an unacceptable level. Accordingly, we have: * created a new OPAL “pmix” framework to abstract the PMI support, with separate components for Cray, Slurm PMI-1, and Slurm PMI-2 implementations. * Replaced the current ORTE grpcomm daemon-based collective operation with an integrated PMIx server, and updated the grpcomm APIs to provide more flexible, multi-algorithm support for collective operations. At this time, only the xcast and allgather operations are supported. * Replaced the current global collective id with a signature based on the names of the participating procs. The allows an unlimited number of collectives to be executed by any group of processes, subject to the requirement that only one collective can be active at a time for a unique combination of procs. Note that a proc can be involved in any number of simultaneous collectives - it is the specific combination of procs that is subject to the constraint * removed the prior OMPI/OPAL modex code * added new macros for executing modex send/recv to simplify use of the new APIs. The send macros allow the caller to specify whether or not the BTL supports async modex operations - if so, then the non-blocking “fence” operation is used, if the active PMIx component supports it. Otherwise, the default is a full blocking modex exchange as we currently perform. * retained the current flag that directs us to use a blocking fence operation, but only to retrieve data upon demand This commit was SVN r32570.
2014-08-21 22:56:47 +04:00
#include "orte/orted/pmix/pmix_server.h"
Reorganize the orted code for easier maintenance. Add ability to deliver xcast messages to local procs (not used at this point). This commit was SVN r14474.
2007-04-23 22:28:20 +04:00
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
/*
* Globals
*/
Sorry for mid-day commit, but I had promised on the call to do this upon my return. Roll in the ORTE state machine. Remove last traces of opal_sos. Remove UTK epoch code. Please see the various emails about the state machine change for details. I'll send something out later with more info on the new arch. This commit was SVN r26242.
2012-04-06 18:23:13 +04:00
static opal_event_t *pipe_handler;
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
static void shutdown_callback(int fd, short flags, void *arg);
Sorry for mid-day commit, but I had promised on the call to do this upon my return. Roll in the ORTE state machine. Remove last traces of opal_sos. Remove UTK epoch code. Please see the various emails about the state machine change for details. I'll send something out later with more info on the new arch. This commit was SVN r26242.
2012-04-06 18:23:13 +04:00
static void pipe_closed(int fd, short flags, void *arg);
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-28 01:09:41 +04:00
static char *orte_parent_uri;
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
static struct {
This commit represents a bunch of work on a Mercurial side branch. As such, the commit message back to the master SVN repository is fairly long. = ORTE Job-Level Output Messages = Add two new interfaces that should be used for all new code throughout the ORTE and OMPI layers (we already make the search-and-replace on the existing ORTE / OMPI layers): * orte_output(): (and corresponding friends ORTE_OUTPUT, orte_output_verbose, etc.) This function sends the output directly to the HNP for processing as part of a job-specific output channel. It supports all the same outputs as opal_output() (syslog, file, stdout, stderr), but for stdout/stderr, the output is sent to the HNP for processing and output. More on this below. * orte_show_help(): This function is a drop-in-replacement for opal_show_help(), with two differences in functionality: 1. the rendered text help message output is sent to the HNP for display (rather than outputting directly into the process' stderr stream) 1. the HNP detects duplicate help messages and does not display them (so that you don't see the same error message N times, once from each of your N MPI processes); instead, it counts "new" instances of the help message and displays a message every ~5 seconds when there are new ones ("I got X new copies of the help message...") opal_show_help and opal_output still exist, but they only output in the current process. The intent for the new orte_* functions is that they can apply job-level intelligence to the output. As such, we recommend that all new ORTE and OMPI code use the new orte_* functions, not thei opal_* functions. === New code === For ORTE and OMPI programmers, here's what you need to do differently in new code: * Do not include opal/util/show_help.h or opal/util/output.h. Instead, include orte/util/output.h (this one header file has declarations for both the orte_output() series of functions and orte_show_help()). * Effectively s/opal_output/orte_output/gi throughout your code. Note that orte_output_open() takes a slightly different argument list (as a way to pass data to the filtering stream -- see below), so you if explicitly call opal_output_open(), you'll need to slightly adapt to the new signature of orte_output_open(). * Literally s/opal_show_help/orte_show_help/. The function signature is identical. === Notes === * orte_output'ing to stream 0 will do similar to what opal_output'ing did, so leaving a hard-coded "0" as the first argument is safe. * For systems that do not use ORTE's RML or the HNP, the effect of orte_output_* and orte_show_help will be identical to their opal counterparts (the additional information passed to orte_output_open() will be lost!). Indeed, the orte_* functions simply become trivial wrappers to their opal_* counterparts. Note that we have not tested this; the code is simple but it is quite possible that we mucked something up. = Filter Framework = Messages sent view the new orte_* functions described above and messages output via the IOF on the HNP will now optionally be passed through a new "filter" framework before being output to stdout/stderr. The "filter" OPAL MCA framework is intended to allow preprocessing to messages before they are sent to their final destinations. The first component that was written in the filter framework was to create an XML stream, segregating all the messages into different XML tags, etc. This will allow 3rd party tools to read the stdout/stderr from the HNP and be able to know exactly what each text message is (e.g., a help message, another OMPI infrastructure message, stdout from the user process, stderr from the user process, etc.). Filtering is not active by default. Filter components must be specifically requested, such as: {{{ $ mpirun --mca filter xml ... }}} There can only be one filter component active. = New MCA Parameters = The new functionality described above introduces two new MCA parameters: * '''orte_base_help_aggregate''': Defaults to 1 (true), meaning that help messages will be aggregated, as described above. If set to 0, all help messages will be displayed, even if they are duplicates (i.e., the original behavior). * '''orte_base_show_output_recursions''': An MCA parameter to help debug one of the known issues, described below. It is likely that this MCA parameter will disappear before v1.3 final. = Known Issues = * The XML filter component is not complete. The current output from this component is preliminary and not real XML. A bit more work needs to be done to configure.m4 search for an appropriate XML library/link it in/use it at run time. * There are possible recursion loops in the orte_output() and orte_show_help() functions -- e.g., if RML send calls orte_output() or orte_show_help(). We have some ideas how to fix these, but figured that it was ok to commit before feature freeze with known issues. The code currently contains sub-optimal workarounds so that this will not be a problem, but it would be good to actually solve the problem rather than have hackish workarounds before v1.3 final. This commit was SVN r18434.
2008-05-14 00:00:55 +04:00
bool debug;
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
bool help;
bool set_sid;
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
bool hnp;
bool daemonize;
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
char* name;
char* vpid_start;
char* num_procs;
int uri_pipe;
int singleton_died_pipe;
Upgrade the node/orted failure detection code to cover all environments. Use the native environment's capabilities where possible - e.g., SLURM detects orted failure and can report it. Elsewhere, use a heartbeat system to detect orted failure - e.g., for TM and rsh. Heart rate is set via mca param. The HNP checks for callback every 2*heartrate, declares orted failure if not seen in last 2*heartrate time. Also detect orted failed-to-start by setting timeout on launch. Currently only used in TM launcher. Neither detection is enabled by default, but are only active if heartrate is set and/or launch timeout is set. Exception for SLURM as orted failure is always detected and reported. More info to come on devel list. This commit was SVN r18555.
2008-06-03 01:46:34 +04:00
bool abort;
Extend the iof by adding two new components to support map-reduce IO chaining. Add a mapreduce tool for running such applications. Fix the state machine to support multiple jobs being simultaneously launched as this is not only required for mapreduce, but can happen under comm-spawn applications as well. This commit was SVN r26380.
2012-05-03 01:00:22 +04:00
bool mapreduce;
Fix tree spawn in the rsh/qrsh environment This commit was SVN r26631.
2012-06-22 01:29:28 +04:00
bool tree_spawn;
Revise the way we handle hetero nodes as users are finding this (a) a significant surprise, and (b) confusing as to when it is required. So try to automate it a bit by creating a topology "signature" that mpirun can share on the cmd line with the remote daemons, thus allowing them to check to see if they match. This isn't comprehensive of course - for now, it only checks the number of each type of hwloc object on the node. This is good enough to pickup major differences (e.g., where we have different numbers of sockets or assigned core bindings). Retain the hetero-nodes flag for those cases where the user *knows* that there are differences and our automated system isn't good enough to see it. Will obviously require further refinement as we find out which variances it can detect, and which it cannot.
2014-12-09 02:33:45 +03:00
char *hnp_topo_sig;
Fix registration of error handlers thru the pmix120 component. A thread-shift operation was hanging on the sync_event_base, which made it dependent on someone calling opal_progress. Unfortunately, a process in "sleep" or spinning outside the MPI library won't do that, and so we never complete errhandler registration.
2016-03-03 01:30:57 +03:00
bool test_suicide;
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
} orted_globals;
/*
* define the orted context table for obtaining parameters
*/
opal_cmd_line_init_t orte_cmd_line_opts[] = {
/* Various "obvious" options */
Revert "Revert r27451 and r27456 - the cmd line parser is incorrectly marking the application as an MCA parameter". It appears the problem was not with the command line parser but the rsh plm. I don't know why this problem was not occuring before the command line parser changes but it appears to be resolved now. This commit was SVN r27527. The following SVN revision numbers were found above: r27451 --> open-mpi/ompi@d59034e6efff3aa4904ccfdea891d1178b4d2fdf r27456 --> open-mpi/ompi@ecdbf3493781081bc07aac86285a96b867790d36
2012-10-30 23:45:18 +04:00
{ NULL, 'h', NULL, "help", 0,
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
&orted_globals.help, OPAL_CMD_LINE_TYPE_BOOL,
"This help message" },
Revert "Revert r27451 and r27456 - the cmd line parser is incorrectly marking the application as an MCA parameter". It appears the problem was not with the command line parser but the rsh plm. I don't know why this problem was not occuring before the command line parser changes but it appears to be resolved now. This commit was SVN r27527. The following SVN revision numbers were found above: r27451 --> open-mpi/ompi@d59034e6efff3aa4904ccfdea891d1178b4d2fdf r27456 --> open-mpi/ompi@ecdbf3493781081bc07aac86285a96b867790d36
2012-10-30 23:45:18 +04:00
{ "orte_daemon_spin", 's', NULL, "spin", 0,
Reactivate the daemon spin from the command line. This commit was SVN r18794.
2008-07-02 05:46:58 +04:00
&orted_spin_flag, OPAL_CMD_LINE_TYPE_BOOL,
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
"Have the orted spin until we can connect a debugger to it" },
Fix registration of error handlers thru the pmix120 component. A thread-shift operation was hanging on the sync_event_base, which made it dependent on someone calling opal_progress. Unfortunately, a process in "sleep" or spinning outside the MPI library won't do that, and so we never complete errhandler registration.
2016-03-03 01:30:57 +03:00
{ NULL, '\0', NULL, "test-suicide", 1,
&orted_globals.test_suicide, OPAL_CMD_LINE_TYPE_BOOL,
"Suicide instead of clean abort after delay" },
Purge whitespace from the repo
2015-06-24 06:59:57 +03:00
Revert "Revert r27451 and r27456 - the cmd line parser is incorrectly marking the application as an MCA parameter". It appears the problem was not with the command line parser but the rsh plm. I don't know why this problem was not occuring before the command line parser changes but it appears to be resolved now. This commit was SVN r27527. The following SVN revision numbers were found above: r27451 --> open-mpi/ompi@d59034e6efff3aa4904ccfdea891d1178b4d2fdf r27456 --> open-mpi/ompi@ecdbf3493781081bc07aac86285a96b867790d36
2012-10-30 23:45:18 +04:00
{ "orte_debug", 'd', NULL, "debug", 0,
Upgrade the node/orted failure detection code to cover all environments. Use the native environment's capabilities where possible - e.g., SLURM detects orted failure and can report it. Elsewhere, use a heartbeat system to detect orted failure - e.g., for TM and rsh. Heart rate is set via mca param. The HNP checks for callback every 2*heartrate, declares orted failure if not seen in last 2*heartrate time. Also detect orted failed-to-start by setting timeout on launch. Currently only used in TM launcher. Neither detection is enabled by default, but are only active if heartrate is set and/or launch timeout is set. Exception for SLURM as orted failure is always detected and reported. More info to come on devel list. This commit was SVN r18555.
2008-06-03 01:46:34 +04:00
NULL, OPAL_CMD_LINE_TYPE_BOOL,
"Debug the OpenRTE" },
Purge whitespace from the repo
2015-06-24 06:59:57 +03:00
Revert "Revert r27451 and r27456 - the cmd line parser is incorrectly marking the application as an MCA parameter". It appears the problem was not with the command line parser but the rsh plm. I don't know why this problem was not occuring before the command line parser changes but it appears to be resolved now. This commit was SVN r27527. The following SVN revision numbers were found above: r27451 --> open-mpi/ompi@d59034e6efff3aa4904ccfdea891d1178b4d2fdf r27456 --> open-mpi/ompi@ecdbf3493781081bc07aac86285a96b867790d36
2012-10-30 23:45:18 +04:00
{ "orte_daemonize", '\0', NULL, "daemonize", 0,
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
&orted_globals.daemonize, OPAL_CMD_LINE_TYPE_BOOL,
"Daemonize the orted into the background" },
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
Revert "Revert r27451 and r27456 - the cmd line parser is incorrectly marking the application as an MCA parameter". It appears the problem was not with the command line parser but the rsh plm. I don't know why this problem was not occuring before the command line parser changes but it appears to be resolved now. This commit was SVN r27527. The following SVN revision numbers were found above: r27451 --> open-mpi/ompi@d59034e6efff3aa4904ccfdea891d1178b4d2fdf r27456 --> open-mpi/ompi@ecdbf3493781081bc07aac86285a96b867790d36
2012-10-30 23:45:18 +04:00
{ "orte_debug_daemons", '\0', NULL, "debug-daemons", 0,
This commit represents a bunch of work on a Mercurial side branch. As such, the commit message back to the master SVN repository is fairly long. = ORTE Job-Level Output Messages = Add two new interfaces that should be used for all new code throughout the ORTE and OMPI layers (we already make the search-and-replace on the existing ORTE / OMPI layers): * orte_output(): (and corresponding friends ORTE_OUTPUT, orte_output_verbose, etc.) This function sends the output directly to the HNP for processing as part of a job-specific output channel. It supports all the same outputs as opal_output() (syslog, file, stdout, stderr), but for stdout/stderr, the output is sent to the HNP for processing and output. More on this below. * orte_show_help(): This function is a drop-in-replacement for opal_show_help(), with two differences in functionality: 1. the rendered text help message output is sent to the HNP for display (rather than outputting directly into the process' stderr stream) 1. the HNP detects duplicate help messages and does not display them (so that you don't see the same error message N times, once from each of your N MPI processes); instead, it counts "new" instances of the help message and displays a message every ~5 seconds when there are new ones ("I got X new copies of the help message...") opal_show_help and opal_output still exist, but they only output in the current process. The intent for the new orte_* functions is that they can apply job-level intelligence to the output. As such, we recommend that all new ORTE and OMPI code use the new orte_* functions, not thei opal_* functions. === New code === For ORTE and OMPI programmers, here's what you need to do differently in new code: * Do not include opal/util/show_help.h or opal/util/output.h. Instead, include orte/util/output.h (this one header file has declarations for both the orte_output() series of functions and orte_show_help()). * Effectively s/opal_output/orte_output/gi throughout your code. Note that orte_output_open() takes a slightly different argument list (as a way to pass data to the filtering stream -- see below), so you if explicitly call opal_output_open(), you'll need to slightly adapt to the new signature of orte_output_open(). * Literally s/opal_show_help/orte_show_help/. The function signature is identical. === Notes === * orte_output'ing to stream 0 will do similar to what opal_output'ing did, so leaving a hard-coded "0" as the first argument is safe. * For systems that do not use ORTE's RML or the HNP, the effect of orte_output_* and orte_show_help will be identical to their opal counterparts (the additional information passed to orte_output_open() will be lost!). Indeed, the orte_* functions simply become trivial wrappers to their opal_* counterparts. Note that we have not tested this; the code is simple but it is quite possible that we mucked something up. = Filter Framework = Messages sent view the new orte_* functions described above and messages output via the IOF on the HNP will now optionally be passed through a new "filter" framework before being output to stdout/stderr. The "filter" OPAL MCA framework is intended to allow preprocessing to messages before they are sent to their final destinations. The first component that was written in the filter framework was to create an XML stream, segregating all the messages into different XML tags, etc. This will allow 3rd party tools to read the stdout/stderr from the HNP and be able to know exactly what each text message is (e.g., a help message, another OMPI infrastructure message, stdout from the user process, stderr from the user process, etc.). Filtering is not active by default. Filter components must be specifically requested, such as: {{{ $ mpirun --mca filter xml ... }}} There can only be one filter component active. = New MCA Parameters = The new functionality described above introduces two new MCA parameters: * '''orte_base_help_aggregate''': Defaults to 1 (true), meaning that help messages will be aggregated, as described above. If set to 0, all help messages will be displayed, even if they are duplicates (i.e., the original behavior). * '''orte_base_show_output_recursions''': An MCA parameter to help debug one of the known issues, described below. It is likely that this MCA parameter will disappear before v1.3 final. = Known Issues = * The XML filter component is not complete. The current output from this component is preliminary and not real XML. A bit more work needs to be done to configure.m4 search for an appropriate XML library/link it in/use it at run time. * There are possible recursion loops in the orte_output() and orte_show_help() functions -- e.g., if RML send calls orte_output() or orte_show_help(). We have some ideas how to fix these, but figured that it was ok to commit before feature freeze with known issues. The code currently contains sub-optimal workarounds so that this will not be a problem, but it would be good to actually solve the problem rather than have hackish workarounds before v1.3 final. This commit was SVN r18434.
2008-05-14 00:00:55 +04:00
&orted_globals.debug, OPAL_CMD_LINE_TYPE_BOOL,
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
"Enable debugging of OpenRTE daemons" },
Revert "Revert r27451 and r27456 - the cmd line parser is incorrectly marking the application as an MCA parameter". It appears the problem was not with the command line parser but the rsh plm. I don't know why this problem was not occuring before the command line parser changes but it appears to be resolved now. This commit was SVN r27527. The following SVN revision numbers were found above: r27451 --> open-mpi/ompi@d59034e6efff3aa4904ccfdea891d1178b4d2fdf r27456 --> open-mpi/ompi@ecdbf3493781081bc07aac86285a96b867790d36
2012-10-30 23:45:18 +04:00
{ "orte_debug_daemons_file", '\0', NULL, "debug-daemons-file", 0,
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
NULL, OPAL_CMD_LINE_TYPE_BOOL,
"Enable debugging of OpenRTE daemons, storing output in files" },
Revert "Revert r27451 and r27456 - the cmd line parser is incorrectly marking the application as an MCA parameter". It appears the problem was not with the command line parser but the rsh plm. I don't know why this problem was not occuring before the command line parser changes but it appears to be resolved now. This commit was SVN r27527. The following SVN revision numbers were found above: r27451 --> open-mpi/ompi@d59034e6efff3aa4904ccfdea891d1178b4d2fdf r27456 --> open-mpi/ompi@ecdbf3493781081bc07aac86285a96b867790d36
2012-10-30 23:45:18 +04:00
{ NULL, '\0', NULL, "hnp", 0,
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
&orted_globals.hnp, OPAL_CMD_LINE_TYPE_BOOL,
"Direct the orted to act as the HNP"},
Revert "Revert r27451 and r27456 - the cmd line parser is incorrectly marking the application as an MCA parameter". It appears the problem was not with the command line parser but the rsh plm. I don't know why this problem was not occuring before the command line parser changes but it appears to be resolved now. This commit was SVN r27527. The following SVN revision numbers were found above: r27451 --> open-mpi/ompi@d59034e6efff3aa4904ccfdea891d1178b4d2fdf r27456 --> open-mpi/ompi@ecdbf3493781081bc07aac86285a96b867790d36
2012-10-30 23:45:18 +04:00
{ "orte_hnp_uri", '\0', NULL, "hnp-uri", 1,
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
NULL, OPAL_CMD_LINE_TYPE_STRING,
"URI for the HNP"},
Purge whitespace from the repo
2015-06-24 06:59:57 +03:00
Revert "Revert r27451 and r27456 - the cmd line parser is incorrectly marking the application as an MCA parameter". It appears the problem was not with the command line parser but the rsh plm. I don't know why this problem was not occuring before the command line parser changes but it appears to be resolved now. This commit was SVN r27527. The following SVN revision numbers were found above: r27451 --> open-mpi/ompi@d59034e6efff3aa4904ccfdea891d1178b4d2fdf r27456 --> open-mpi/ompi@ecdbf3493781081bc07aac86285a96b867790d36
2012-10-30 23:45:18 +04:00
{ "orte_parent_uri", '\0', NULL, "parent-uri", 1,
Repair the tree spawn. The problem seems to come from the fact that now the HNP send the messages using the routed component. In the case of tree spawn, when a intermediary node spawn a child it doesn't know how to forward a message to it, so when the node-map message is coming from the HNP (as there is nothing yet in the contact/routing table) the message is sent back the way it came. As a result the node-map message keeps jumping between the HNP and the first level orteds. The solution is to add a new option to the children orte_parent_uri, which is only set when the orted is _not_ directly spawned by the HNP. When this option is present on the argument list, the orted will add the parent to its routing, and force the parent to update his routes (by sending the URI). With this approach, the routing tree is build in same time as the processes are spawned, and all messages from the HNP can be routed to the leaves. However, this is far from an optimal solution. Right now, this so called tree spawn, only spawn the children in a tree without doing anything about the "connect back to the HNP" step. The HNP is flooded with reports from all the orted. The total number of messages is higher than in the non tree startup scheme, so we do not expect this approach to be scalable in the current incarnation. A complete overhaul of the tree startup is required in order improve the scalability. Stay tuned! This commit was SVN r21504.
2009-06-24 02:10:25 +04:00
NULL, OPAL_CMD_LINE_TYPE_STRING,
"URI for the parent if tree launch is enabled."},
Purge whitespace from the repo
2015-06-24 06:59:57 +03:00
Revert "Revert r27451 and r27456 - the cmd line parser is incorrectly marking the application as an MCA parameter". It appears the problem was not with the command line parser but the rsh plm. I don't know why this problem was not occuring before the command line parser changes but it appears to be resolved now. This commit was SVN r27527. The following SVN revision numbers were found above: r27451 --> open-mpi/ompi@d59034e6efff3aa4904ccfdea891d1178b4d2fdf r27456 --> open-mpi/ompi@ecdbf3493781081bc07aac86285a96b867790d36
2012-10-30 23:45:18 +04:00
{ NULL, '\0', NULL, "set-sid", 0,
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
&orted_globals.set_sid, OPAL_CMD_LINE_TYPE_BOOL,
"Direct the orted to separate from the current session"},
Purge whitespace from the repo
2015-06-24 06:59:57 +03:00
Revert "Revert r27451 and r27456 - the cmd line parser is incorrectly marking the application as an MCA parameter". It appears the problem was not with the command line parser but the rsh plm. I don't know why this problem was not occuring before the command line parser changes but it appears to be resolved now. This commit was SVN r27527. The following SVN revision numbers were found above: r27451 --> open-mpi/ompi@d59034e6efff3aa4904ccfdea891d1178b4d2fdf r27456 --> open-mpi/ompi@ecdbf3493781081bc07aac86285a96b867790d36
2012-10-30 23:45:18 +04:00
{ "tmpdir_base", '\0', NULL, "tmpdir", 1,
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
NULL, OPAL_CMD_LINE_TYPE_STRING,
"Set the root for the session directory tree" },
Revert "Revert r27451 and r27456 - the cmd line parser is incorrectly marking the application as an MCA parameter". It appears the problem was not with the command line parser but the rsh plm. I don't know why this problem was not occuring before the command line parser changes but it appears to be resolved now. This commit was SVN r27527. The following SVN revision numbers were found above: r27451 --> open-mpi/ompi@d59034e6efff3aa4904ccfdea891d1178b4d2fdf r27456 --> open-mpi/ompi@ecdbf3493781081bc07aac86285a96b867790d36
2012-10-30 23:45:18 +04:00
{ NULL, '\0', NULL, "report-uri", 1,
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
&orted_globals.uri_pipe, OPAL_CMD_LINE_TYPE_INT,
"Report this process' uri on indicated pipe"},
Revert "Revert r27451 and r27456 - the cmd line parser is incorrectly marking the application as an MCA parameter". It appears the problem was not with the command line parser but the rsh plm. I don't know why this problem was not occuring before the command line parser changes but it appears to be resolved now. This commit was SVN r27527. The following SVN revision numbers were found above: r27451 --> open-mpi/ompi@d59034e6efff3aa4904ccfdea891d1178b4d2fdf r27456 --> open-mpi/ompi@ecdbf3493781081bc07aac86285a96b867790d36
2012-10-30 23:45:18 +04:00
{ NULL, '\0', NULL, "singleton-died-pipe", 1,
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
&orted_globals.singleton_died_pipe, OPAL_CMD_LINE_TYPE_INT,
"Watch on indicated pipe for singleton termination"},
Purge whitespace from the repo
2015-06-24 06:59:57 +03:00
Revert "Revert r27451 and r27456 - the cmd line parser is incorrectly marking the application as an MCA parameter". It appears the problem was not with the command line parser but the rsh plm. I don't know why this problem was not occuring before the command line parser changes but it appears to be resolved now. This commit was SVN r27527. The following SVN revision numbers were found above: r27451 --> open-mpi/ompi@d59034e6efff3aa4904ccfdea891d1178b4d2fdf r27456 --> open-mpi/ompi@ecdbf3493781081bc07aac86285a96b867790d36
2012-10-30 23:45:18 +04:00
{ "orte_output_filename", '\0', "output-filename", "output-filename", 1,
Pass along the new output-filename and xterm cmd line options to the orteds - otherwise, they won't work in ssh environments. Modify the rsh launcher to add -X to ssh if xterm option was selected. This commit was SVN r20407.
2009-02-03 23:06:05 +03:00
NULL, OPAL_CMD_LINE_TYPE_STRING,
"Redirect output from application processes into filename.rank" },
Purge whitespace from the repo
2015-06-24 06:59:57 +03:00
Revert "Revert r27451 and r27456 - the cmd line parser is incorrectly marking the application as an MCA parameter". It appears the problem was not with the command line parser but the rsh plm. I don't know why this problem was not occuring before the command line parser changes but it appears to be resolved now. This commit was SVN r27527. The following SVN revision numbers were found above: r27451 --> open-mpi/ompi@d59034e6efff3aa4904ccfdea891d1178b4d2fdf r27456 --> open-mpi/ompi@ecdbf3493781081bc07aac86285a96b867790d36
2012-10-30 23:45:18 +04:00
{ "orte_xterm", '\0', "xterm", "xterm", 1,
Pass along the new output-filename and xterm cmd line options to the orteds - otherwise, they won't work in ssh environments. Modify the rsh launcher to add -X to ssh if xterm option was selected. This commit was SVN r20407.
2009-02-03 23:06:05 +03:00
NULL, OPAL_CMD_LINE_TYPE_STRING,
"Create a new xterm window and display output from the specified ranks there" },
Revert "Revert r27451 and r27456 - the cmd line parser is incorrectly marking the application as an MCA parameter". It appears the problem was not with the command line parser but the rsh plm. I don't know why this problem was not occuring before the command line parser changes but it appears to be resolved now. This commit was SVN r27527. The following SVN revision numbers were found above: r27451 --> open-mpi/ompi@d59034e6efff3aa4904ccfdea891d1178b4d2fdf r27456 --> open-mpi/ompi@ecdbf3493781081bc07aac86285a96b867790d36
2012-10-30 23:45:18 +04:00
{ "orte_report_bindings", '\0', "report-bindings", "report-bindings", 0,
Instead of an odls-base mca param, make report_bindings a global param so that we can (a) detect it was set in the plm, and then (b) ensure it gets passed along to remote orteds so they will comply with the request. This commit was SVN r22021.
2009-09-28 07:17:15 +04:00
NULL, OPAL_CMD_LINE_TYPE_BOOL,
"Whether to report process bindings to stderr" },
Revert "Revert r27451 and r27456 - the cmd line parser is incorrectly marking the application as an MCA parameter". It appears the problem was not with the command line parser but the rsh plm. I don't know why this problem was not occuring before the command line parser changes but it appears to be resolved now. This commit was SVN r27527. The following SVN revision numbers were found above: r27451 --> open-mpi/ompi@d59034e6efff3aa4904ccfdea891d1178b4d2fdf r27456 --> open-mpi/ompi@ecdbf3493781081bc07aac86285a96b867790d36
2012-10-30 23:45:18 +04:00
{ "orte_node_regex", '\0', "nodes", "nodes", 1,
Fix some major bit-rot on scalable launch. If static ports are provided, then daemons can connect back to the HNP via the routed connection tree instead of doing so directly. In order to do that at scale, the node list must be passed as a regular expression - otherwise, the orted command line gets too long. Over the course of time, usage of static ports got corrupted in several places, the "parent" info got incorrectly reset, etc. So correct all that and get the regex-based wireup going again. Also, don't pass node lists if static ports aren't enabled - they are of no value to the orted and just create the possibility of overly-long cmd lines. This commit was SVN r24860.
2011-07-07 22:54:30 +04:00
NULL, OPAL_CMD_LINE_TYPE_STRING,
"Regular expression defining nodes in system" },
Revert "Revert r27451 and r27456 - the cmd line parser is incorrectly marking the application as an MCA parameter". It appears the problem was not with the command line parser but the rsh plm. I don't know why this problem was not occuring before the command line parser changes but it appears to be resolved now. This commit was SVN r27527. The following SVN revision numbers were found above: r27451 --> open-mpi/ompi@d59034e6efff3aa4904ccfdea891d1178b4d2fdf r27456 --> open-mpi/ompi@ecdbf3493781081bc07aac86285a96b867790d36
2012-10-30 23:45:18 +04:00
{ "orte_hetero_nodes", '\0', NULL, "hetero-nodes", 0,
Minimize the amount of topology info returned by the daemons. Most clusters, especially at scale, use the same node topology on every node, so there is no re ason to return the topology from every daemon. Borrow a page from the --hetero-apps page and let users indicate that the node topology differs by adding a -- hetero-nodes option to mpirun. If the option is set, then every daemon returns topology info. If not set, then only daemon vpid=1 returns it. We always want one daemon to return the topology as the head node is often different from the compute nodes. Having one daemon return the compute node topolo gy allows us to detect any such difference. All compute nodes are then set to the same topology. This commit was SVN r25408.
2011-11-01 22:43:10 +04:00
NULL, OPAL_CMD_LINE_TYPE_BOOL,
"Nodes in cluster may differ in topology, so send the topology back from each node [Default = false]" },
Purge whitespace from the repo
2015-06-24 06:59:57 +03:00
Revise the way we handle hetero nodes as users are finding this (a) a significant surprise, and (b) confusing as to when it is required. So try to automate it a bit by creating a topology "signature" that mpirun can share on the cmd line with the remote daemons, thus allowing them to check to see if they match. This isn't comprehensive of course - for now, it only checks the number of each type of hwloc object on the node. This is good enough to pickup major differences (e.g., where we have different numbers of sockets or assigned core bindings). Retain the hetero-nodes flag for those cases where the user *knows* that there are differences and our automated system isn't good enough to see it. Will obviously require further refinement as we find out which variances it can detect, and which it cannot.
2014-12-09 02:33:45 +03:00
{ NULL, '\0', NULL, "hnp-topo-sig", 1,
&orted_globals.hnp_topo_sig, OPAL_CMD_LINE_TYPE_STRING,
"Topology signature of HNP" },
Minimize the amount of topology info returned by the daemons. Most clusters, especially at scale, use the same node topology on every node, so there is no re ason to return the topology from every daemon. Borrow a page from the --hetero-apps page and let users indicate that the node topology differs by adding a -- hetero-nodes option to mpirun. If the option is set, then every daemon returns topology info. If not set, then only daemon vpid=1 returns it. We always want one daemon to return the topology as the head node is often different from the compute nodes. Having one daemon return the compute node topolo gy allows us to detect any such difference. All compute nodes are then set to the same topology. This commit was SVN r25408.
2011-11-01 22:43:10 +04:00
Revert "Revert r27451 and r27456 - the cmd line parser is incorrectly marking the application as an MCA parameter". It appears the problem was not with the command line parser but the rsh plm. I don't know why this problem was not occuring before the command line parser changes but it appears to be resolved now. This commit was SVN r27527. The following SVN revision numbers were found above: r27451 --> open-mpi/ompi@d59034e6efff3aa4904ccfdea891d1178b4d2fdf r27456 --> open-mpi/ompi@ecdbf3493781081bc07aac86285a96b867790d36
2012-10-30 23:45:18 +04:00
{ NULL, '\0', "mapreduce", "mapreduce", 0,
Extend the iof by adding two new components to support map-reduce IO chaining. Add a mapreduce tool for running such applications. Fix the state machine to support multiple jobs being simultaneously launched as this is not only required for mapreduce, but can happen under comm-spawn applications as well. This commit was SVN r26380.
2012-05-03 01:00:22 +04:00
&orted_globals.mapreduce, OPAL_CMD_LINE_TYPE_BOOL,
"Whether to report process bindings to stderr" },
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
/* End of list */
Revert "Revert r27451 and r27456 - the cmd line parser is incorrectly marking the application as an MCA parameter". It appears the problem was not with the command line parser but the rsh plm. I don't know why this problem was not occuring before the command line parser changes but it appears to be resolved now. This commit was SVN r27527. The following SVN revision numbers were found above: r27451 --> open-mpi/ompi@d59034e6efff3aa4904ccfdea891d1178b4d2fdf r27456 --> open-mpi/ompi@ecdbf3493781081bc07aac86285a96b867790d36
2012-10-30 23:45:18 +04:00
{ NULL, '\0', NULL, NULL, 0,
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
NULL, OPAL_CMD_LINE_TYPE_NULL, NULL }
};
int orte_daemon(int argc, char *argv[])
{
int ret = 0;
opal_cmd_line_t *cmd_line = NULL;
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
char *rml_uri;
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
int i;
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
opal_buffer_t *buffer;
orte: fixup hostname max length usage Also removes orte specific max hostname value. Signed-off-by: Karol Mroz <mroz.karol@gmail.com>
2016-04-16 03:47:42 +03:00
char hostname[OPAL_MAXHOSTNAMELEN];
Remove a bunch of dead code: gcc 4.7 warns of set-but-unused variables. So get rid of them. This commit was SVN r28538.
2013-05-18 01:45:49 +04:00
#if OPAL_ENABLE_FT_CR == 1
Merge in tmp/jjh-scratch {{{ svn merge -r 18218:18240 https://svn.open-mpi.org/svn/ompi/tmp/jjh-scratch . }}} Contains: * Primarily a fix for a user reported problem where a cached file descriptor is causing a SIGPIPE on restart. * Cleanup some small memory leaks from using mca_base_param_env_var() - Thanks Jeff * Cleanup ORTE FT tool compilation in non-FT builds - Thanks Tim P. * Cleanup mpi interface with missplaced {{{OPAL_CR_ENTER_LIBRARY}}} - Thanks Terry * Some other sundry cleanup items all dealing with C/R functionality in the trunk. This commit was SVN r18241.
2008-04-23 04:17:12 +04:00
char *tmp_env_var = NULL;
Remove a bunch of dead code: gcc 4.7 warns of set-but-unused variables. So get rid of them. This commit was SVN r28538.
2013-05-18 01:45:49 +04:00
#endif
Remove OPAL_HAVE_HWLOC qualifier and error out if --without-hwloc is given
2015-09-05 02:54:40 +03:00
char *coprocessors;
uint8_t tflag;
Purge whitespace from the repo
2015-06-24 06:59:57 +03:00
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
/* initialize the globals */
memset(&orted_globals, 0, sizeof(orted_globals));
/* initialize the singleton died pipe to an illegal value so we can detect it was set */
orted_globals.singleton_died_pipe = -1;
Purge whitespace from the repo
2015-06-24 06:59:57 +03:00
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
/* setup to check common command line options that just report and die */
cmd_line = OBJ_NEW(opal_cmd_line_t);
Fix some major bit-rot on scalable launch. If static ports are provided, then daemons can connect back to the HNP via the routed connection tree instead of doing so directly. In order to do that at scale, the node list must be passed as a regular expression - otherwise, the orted command line gets too long. Over the course of time, usage of static ports got corrupted in several places, the "parent" info got incorrectly reset, etc. So correct all that and get the regex-based wireup going again. Also, don't pass node lists if static ports aren't enabled - they are of no value to the orted and just create the possibility of overly-long cmd lines. This commit was SVN r24860.
2011-07-07 22:54:30 +04:00
if (OPAL_SUCCESS != opal_cmd_line_create(cmd_line, orte_cmd_line_opts)) {
OBJ_RELEASE(cmd_line);
exit(1);
}
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
mca_base_cmd_line_setup(cmd_line);
Move the registration of MCA params out of the init of the var system - put them in with the rest of the OPAL MCA param registrations Take another shot at untangling the spaghetti orterun: fix for command line parsing orte-submit calls opal_init_util () before parsing out MCA command line options (-mca, -am, etc). This prevents mpirun from setting opal MCA variables for some frameworks as well as the MCA base. This is because when a framework is opened all of its variables are set to read-only. Eventually we want to lift this restriction on some MCA variables but since -mca is affected we must parse out the MCA command line options before opal_init_util(). This commit fixes the bug by adding a new option to opal_cmd_line_parse (ignore unknown option) so orte-submit can pre-parse the command line for MCA options. Signed-off-by: Nathan Hjelm <hjelmn@me.com> Minor cleanups to avoid releasing/recreating the cmd line
2016-05-07 14:12:01 +03:00
if (ORTE_SUCCESS != (ret = opal_cmd_line_parse(cmd_line, false, false,
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
argc, argv))) {
char *args = NULL;
args = opal_cmd_line_get_usage_msg(cmd_line);
Fix some major bit-rot on scalable launch. If static ports are provided, then daemons can connect back to the HNP via the routed connection tree instead of doing so directly. In order to do that at scale, the node list must be passed as a regular expression - otherwise, the orted command line gets too long. Over the course of time, usage of static ports got corrupted in several places, the "parent" info got incorrectly reset, etc. So correct all that and get the regex-based wireup going again. Also, don't pass node lists if static ports aren't enabled - they are of no value to the orted and just create the possibility of overly-long cmd lines. This commit was SVN r24860.
2011-07-07 22:54:30 +04:00
fprintf(stderr, "Usage: %s [OPTION]...\n%s\n", argv[0], args);
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
free(args);
Fix some major bit-rot on scalable launch. If static ports are provided, then daemons can connect back to the HNP via the routed connection tree instead of doing so directly. In order to do that at scale, the node list must be passed as a regular expression - otherwise, the orted command line gets too long. Over the course of time, usage of static ports got corrupted in several places, the "parent" info got incorrectly reset, etc. So correct all that and get the regex-based wireup going again. Also, don't pass node lists if static ports aren't enabled - they are of no value to the orted and just create the possibility of overly-long cmd lines. This commit was SVN r24860.
2011-07-07 22:54:30 +04:00
OBJ_RELEASE(cmd_line);
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
return ret;
}
Purge whitespace from the repo
2015-06-24 06:59:57 +03:00
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
/*
* Since this process can now handle MCA/GMCA parameters, make sure to
* process them.
*/
Repair the processing of cmd line options that mapped to MCA params. This was responsible for breaking things like map-by <foo>. Remove debug, let orterun send terminate cmd to DVM Recover the DVM support
2016-05-06 20:55:21 +03:00
mca_base_cmd_line_process_args(cmd_line, &environ, &environ);
Purge whitespace from the repo
2015-06-24 06:59:57 +03:00
Bring back the AMCA fix for the orted from r15219. This fixes C/R support for the trunk which regressed in r15390 due to the RTE changes. This commit was SVN r15409. The following SVN revision numbers were found above: r15219 --> open-mpi/ompi@f88aa6c273d1259b15fb80f95a1154d400601658 r15390 --> open-mpi/ompi@bd65f8ba887cfa93295cf8a2f17ea7ecb04ac90b
2007-07-13 22:15:36 +04:00
/* Ensure that enough of OPAL is setup for us to be able to run */
Add a comment to clarify the relationship between mca_base_cmd_line_process_args() and opal_init_util() so we do not forget their ordering needs, and subtle relationship. This commit was SVN r15412.
2007-07-13 23:08:05 +04:00
/*
* NOTE: (JJH)
* We need to allow 'mca_base_cmd_line_process_args()' to process command
* line arguments *before* calling opal_init_util() since the command
* line could contain MCA parameters that affect the way opal_init_util()
* functions. AMCA parameters are one such option normally received on the
* command line that affect the way opal_init_util() behaves.
Purge whitespace from the repo
2015-06-24 06:59:57 +03:00
* It is "safe" to call mca_base_cmd_line_process_args() before
Add a comment to clarify the relationship between mca_base_cmd_line_process_args() and opal_init_util() so we do not forget their ordering needs, and subtle relationship. This commit was SVN r15412.
2007-07-13 23:08:05 +04:00
* opal_init_util() since mca_base_cmd_line_process_args() does *not*
* depend upon opal_init_util() functionality.
*/
A patch from UTK to allow orte_init(), opal_init(), and associated friends also receive &argc and &argv (George asked Jeff to Ralph to review before committing). The thought is that passing argv and argc to opal/orte_init be useful to other projects outside of OMPI that are using OPAL and/or ORTE (especially in conjunction with some other bootstrapping code where it is helpful to modify argv). It's such a small thing that it's easy to apply here to make others' lives a little easier. Ask George for more details; I'm just the messenger. :-) Judging by the copyrights on this patch, it's been around for a while. :-) This commit was SVN r22260.
2009-12-04 03:51:15 +03:00
if (OPAL_SUCCESS != opal_init_util(&argc, &argv)) {
Bring back the AMCA fix for the orted from r15219. This fixes C/R support for the trunk which regressed in r15390 due to the RTE changes. This commit was SVN r15409. The following SVN revision numbers were found above: r15219 --> open-mpi/ompi@f88aa6c273d1259b15fb80f95a1154d400601658 r15390 --> open-mpi/ompi@bd65f8ba887cfa93295cf8a2f17ea7ecb04ac90b
2007-07-13 22:15:36 +04:00
fprintf(stderr, "OPAL failed to initialize -- orted aborting\n");
exit(1);
}
Upgrade the ability of orterun to deal with cmd line MCA params that are passed to the orteds. Help reduce the size of the cmd line by eliminating duplicates where possible, and alert to duplicate entries that can cause problems. Add comments to both orterun and orted code explaining why we take a snapshot of the local environment and apply it to the local procs when they are spawned. This commit was SVN r18842.
2008-07-09 02:36:39 +04:00
/* save the environment for launch purposes. This MUST be
* done so that we can pass it to any local procs we
* spawn - otherwise, those local procs won't see any
* non-MCA envars that were set in the enviro when the
* orted was executed - e.g., by .csh
*/
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
orte_launch_environ = opal_argv_copy(environ);
Purge whitespace from the repo
2015-06-24 06:59:57 +03:00
Ensure that any application-specific selection of ess module doesn't get overridden by what is given to the orted or orterun Cleanup tool name determination for CM This commit was SVN r22980.
2010-04-15 22:10:50 +04:00
/* purge any ess flag set in the environ when we were launched */
configury: new OPAL_SET_MCA_PREFIX/ORTE_SET_MCA_CMD_LINE_ID macros These two macros set the MCA prefix and MCA cmd line id, respectively. Specifically, MCA parameters will be named PREFIX<foo> in the environment, and the cmd line will use -ID foo bar. These macros must be called during configure.ac and a value supplied. In the case of Open MPI, the values given are PREFIX=OMPI_MCA_ and ID=mca. Other projects (such as ORCM) will call these macros with their own unique values. For example, ORCM uses PREFIX=ORCM_MCA_ and ID=omca This scheme is necessary to allow running Open MPI applications under systems that use their own versions of ORTE and OPAL. For example, when running OMPI applications under ORCM, we need the MCA params passed to the ORCM daemons to be separated from those recognized by the OMPI application.
2014-10-23 00:56:37 +04:00
opal_unsetenv(OPAL_MCA_PREFIX"ess", &orte_launch_environ);
Purge whitespace from the repo
2015-06-24 06:59:57 +03:00
Ensure daemons know contact info for all other daemons. Update binomial xcast to work in revised design. Add debug output to orted so the daemon lets us know it launched (if --debug-daemons set) early on in case it fails during orte_init This commit was SVN r15555.
2007-07-23 19:00:39 +04:00
/* if orte_daemon_debug is set, let someone know we are alive right
* away just in case we have a problem along the way
*/
This commit represents a bunch of work on a Mercurial side branch. As such, the commit message back to the master SVN repository is fairly long. = ORTE Job-Level Output Messages = Add two new interfaces that should be used for all new code throughout the ORTE and OMPI layers (we already make the search-and-replace on the existing ORTE / OMPI layers): * orte_output(): (and corresponding friends ORTE_OUTPUT, orte_output_verbose, etc.) This function sends the output directly to the HNP for processing as part of a job-specific output channel. It supports all the same outputs as opal_output() (syslog, file, stdout, stderr), but for stdout/stderr, the output is sent to the HNP for processing and output. More on this below. * orte_show_help(): This function is a drop-in-replacement for opal_show_help(), with two differences in functionality: 1. the rendered text help message output is sent to the HNP for display (rather than outputting directly into the process' stderr stream) 1. the HNP detects duplicate help messages and does not display them (so that you don't see the same error message N times, once from each of your N MPI processes); instead, it counts "new" instances of the help message and displays a message every ~5 seconds when there are new ones ("I got X new copies of the help message...") opal_show_help and opal_output still exist, but they only output in the current process. The intent for the new orte_* functions is that they can apply job-level intelligence to the output. As such, we recommend that all new ORTE and OMPI code use the new orte_* functions, not thei opal_* functions. === New code === For ORTE and OMPI programmers, here's what you need to do differently in new code: * Do not include opal/util/show_help.h or opal/util/output.h. Instead, include orte/util/output.h (this one header file has declarations for both the orte_output() series of functions and orte_show_help()). * Effectively s/opal_output/orte_output/gi throughout your code. Note that orte_output_open() takes a slightly different argument list (as a way to pass data to the filtering stream -- see below), so you if explicitly call opal_output_open(), you'll need to slightly adapt to the new signature of orte_output_open(). * Literally s/opal_show_help/orte_show_help/. The function signature is identical. === Notes === * orte_output'ing to stream 0 will do similar to what opal_output'ing did, so leaving a hard-coded "0" as the first argument is safe. * For systems that do not use ORTE's RML or the HNP, the effect of orte_output_* and orte_show_help will be identical to their opal counterparts (the additional information passed to orte_output_open() will be lost!). Indeed, the orte_* functions simply become trivial wrappers to their opal_* counterparts. Note that we have not tested this; the code is simple but it is quite possible that we mucked something up. = Filter Framework = Messages sent view the new orte_* functions described above and messages output via the IOF on the HNP will now optionally be passed through a new "filter" framework before being output to stdout/stderr. The "filter" OPAL MCA framework is intended to allow preprocessing to messages before they are sent to their final destinations. The first component that was written in the filter framework was to create an XML stream, segregating all the messages into different XML tags, etc. This will allow 3rd party tools to read the stdout/stderr from the HNP and be able to know exactly what each text message is (e.g., a help message, another OMPI infrastructure message, stdout from the user process, stderr from the user process, etc.). Filtering is not active by default. Filter components must be specifically requested, such as: {{{ $ mpirun --mca filter xml ... }}} There can only be one filter component active. = New MCA Parameters = The new functionality described above introduces two new MCA parameters: * '''orte_base_help_aggregate''': Defaults to 1 (true), meaning that help messages will be aggregated, as described above. If set to 0, all help messages will be displayed, even if they are duplicates (i.e., the original behavior). * '''orte_base_show_output_recursions''': An MCA parameter to help debug one of the known issues, described below. It is likely that this MCA parameter will disappear before v1.3 final. = Known Issues = * The XML filter component is not complete. The current output from this component is preliminary and not real XML. A bit more work needs to be done to configure.m4 search for an appropriate XML library/link it in/use it at run time. * There are possible recursion loops in the orte_output() and orte_show_help() functions -- e.g., if RML send calls orte_output() or orte_show_help(). We have some ideas how to fix these, but figured that it was ok to commit before feature freeze with known issues. The code currently contains sub-optimal workarounds so that this will not be a problem, but it would be good to actually solve the problem rather than have hackish workarounds before v1.3 final. This commit was SVN r18434.
2008-05-14 00:00:55 +04:00
if (orted_globals.debug) {
orte: fixup hostname max length usage Also removes orte specific max hostname value. Signed-off-by: Karol Mroz <mroz.karol@gmail.com>
2016-04-16 03:47:42 +03:00
gethostname(hostname, sizeof(hostname));
Ensure daemons know contact info for all other daemons. Update binomial xcast to work in revised design. Add debug output to orted so the daemon lets us know it launched (if --debug-daemons set) early on in case it fails during orte_init This commit was SVN r15555.
2007-07-23 19:00:39 +04:00
fprintf(stderr, "Daemon was launched on %s - beginning to initialize\n", hostname);
}
Purge whitespace from the repo
2015-06-24 06:59:57 +03:00
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
/* check for help request */
if (orted_globals.help) {
char *args = NULL;
args = opal_cmd_line_get_usage_msg(cmd_line);
This commit represents a bunch of work on a Mercurial side branch. As such, the commit message back to the master SVN repository is fairly long. = ORTE Job-Level Output Messages = Add two new interfaces that should be used for all new code throughout the ORTE and OMPI layers (we already make the search-and-replace on the existing ORTE / OMPI layers): * orte_output(): (and corresponding friends ORTE_OUTPUT, orte_output_verbose, etc.) This function sends the output directly to the HNP for processing as part of a job-specific output channel. It supports all the same outputs as opal_output() (syslog, file, stdout, stderr), but for stdout/stderr, the output is sent to the HNP for processing and output. More on this below. * orte_show_help(): This function is a drop-in-replacement for opal_show_help(), with two differences in functionality: 1. the rendered text help message output is sent to the HNP for display (rather than outputting directly into the process' stderr stream) 1. the HNP detects duplicate help messages and does not display them (so that you don't see the same error message N times, once from each of your N MPI processes); instead, it counts "new" instances of the help message and displays a message every ~5 seconds when there are new ones ("I got X new copies of the help message...") opal_show_help and opal_output still exist, but they only output in the current process. The intent for the new orte_* functions is that they can apply job-level intelligence to the output. As such, we recommend that all new ORTE and OMPI code use the new orte_* functions, not thei opal_* functions. === New code === For ORTE and OMPI programmers, here's what you need to do differently in new code: * Do not include opal/util/show_help.h or opal/util/output.h. Instead, include orte/util/output.h (this one header file has declarations for both the orte_output() series of functions and orte_show_help()). * Effectively s/opal_output/orte_output/gi throughout your code. Note that orte_output_open() takes a slightly different argument list (as a way to pass data to the filtering stream -- see below), so you if explicitly call opal_output_open(), you'll need to slightly adapt to the new signature of orte_output_open(). * Literally s/opal_show_help/orte_show_help/. The function signature is identical. === Notes === * orte_output'ing to stream 0 will do similar to what opal_output'ing did, so leaving a hard-coded "0" as the first argument is safe. * For systems that do not use ORTE's RML or the HNP, the effect of orte_output_* and orte_show_help will be identical to their opal counterparts (the additional information passed to orte_output_open() will be lost!). Indeed, the orte_* functions simply become trivial wrappers to their opal_* counterparts. Note that we have not tested this; the code is simple but it is quite possible that we mucked something up. = Filter Framework = Messages sent view the new orte_* functions described above and messages output via the IOF on the HNP will now optionally be passed through a new "filter" framework before being output to stdout/stderr. The "filter" OPAL MCA framework is intended to allow preprocessing to messages before they are sent to their final destinations. The first component that was written in the filter framework was to create an XML stream, segregating all the messages into different XML tags, etc. This will allow 3rd party tools to read the stdout/stderr from the HNP and be able to know exactly what each text message is (e.g., a help message, another OMPI infrastructure message, stdout from the user process, stderr from the user process, etc.). Filtering is not active by default. Filter components must be specifically requested, such as: {{{ $ mpirun --mca filter xml ... }}} There can only be one filter component active. = New MCA Parameters = The new functionality described above introduces two new MCA parameters: * '''orte_base_help_aggregate''': Defaults to 1 (true), meaning that help messages will be aggregated, as described above. If set to 0, all help messages will be displayed, even if they are duplicates (i.e., the original behavior). * '''orte_base_show_output_recursions''': An MCA parameter to help debug one of the known issues, described below. It is likely that this MCA parameter will disappear before v1.3 final. = Known Issues = * The XML filter component is not complete. The current output from this component is preliminary and not real XML. A bit more work needs to be done to configure.m4 search for an appropriate XML library/link it in/use it at run time. * There are possible recursion loops in the orte_output() and orte_show_help() functions -- e.g., if RML send calls orte_output() or orte_show_help(). We have some ideas how to fix these, but figured that it was ok to commit before feature freeze with known issues. The code currently contains sub-optimal workarounds so that this will not be a problem, but it would be good to actually solve the problem rather than have hackish workarounds before v1.3 final. This commit was SVN r18434.
2008-05-14 00:00:55 +04:00
orte_show_help("help-orted.txt", "orted:usage", false,
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
argv[0], args);
free(args);
return 1;
}
Remove all remaining vestiges of the Windows integration This commit was SVN r28137.
2013-02-28 21:31:47 +04:00
#if defined(HAVE_SETSID)
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
/* see if we were directed to separate from current session */
if (orted_globals.set_sid) {
setsid();
}
Remove all remaining vestiges of the Windows integration This commit was SVN r28137.
2013-02-28 21:31:47 +04:00
#endif
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
/* see if they want us to spin until they can connect a debugger to us */
i=0;
while (orted_spin_flag) {
i++;
Purge whitespace from the repo
2015-06-24 06:59:57 +03:00
if (1000 < i) i=0;
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
}
Update internal libevent to upstream (v1.4.2-rc + OMPI changes). Greatly reduce the number of "foo" -> "opal_foo" symbol renames in the libevent source, and instead greatly expand the event_rename.h file that uses preprocessor macros to make all public symbols be "opal_foo". This commit was SVN r17923.
2008-03-23 15:33:04 +03:00
Fix the configure logic for --with-ft so that it properly takes a comma separated list. Many of the OPAL_ENABLE_FT should be OPAL_ENABLE_FT_CR, so fix those. The OPAL Layer INC should call opal_output on restart so that it can refresh the string it prints to reflect the current pid/hostname which may have changed. This commit was SVN r22824.
2010-03-13 02:57:50 +03:00
#if OPAL_ENABLE_FT_CR == 1
Move in some accumulated small features and minor bug fixes for C/R support. {{{ svn merge -r 16447:16475 https://svn.open-mpi.org/svn/ompi/tmp/jjh-fgs . }}} This commit was SVN r16478.
2007-10-17 17:47:36 +04:00
/* Mark as a tool program */
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-28 01:09:41 +04:00
(void) mca_base_var_env_name ("opal_cr_is_tool", &tmp_env_var);
Merge in tmp/jjh-scratch {{{ svn merge -r 18218:18240 https://svn.open-mpi.org/svn/ompi/tmp/jjh-scratch . }}} Contains: * Primarily a fix for a user reported problem where a cached file descriptor is causing a SIGPIPE on restart. * Cleanup some small memory leaks from using mca_base_param_env_var() - Thanks Jeff * Cleanup ORTE FT tool compilation in non-FT builds - Thanks Tim P. * Cleanup mpi interface with missplaced {{{OPAL_CR_ENTER_LIBRARY}}} - Thanks Terry * Some other sundry cleanup items all dealing with C/R functionality in the trunk. This commit was SVN r18241.
2008-04-23 04:17:12 +04:00
opal_setenv(tmp_env_var,
Move in some accumulated small features and minor bug fixes for C/R support. {{{ svn merge -r 16447:16475 https://svn.open-mpi.org/svn/ompi/tmp/jjh-fgs . }}} This commit was SVN r16478.
2007-10-17 17:47:36 +04:00
"1",
true, &environ);
Merge in tmp/jjh-scratch {{{ svn merge -r 18218:18240 https://svn.open-mpi.org/svn/ompi/tmp/jjh-scratch . }}} Contains: * Primarily a fix for a user reported problem where a cached file descriptor is causing a SIGPIPE on restart. * Cleanup some small memory leaks from using mca_base_param_env_var() - Thanks Jeff * Cleanup ORTE FT tool compilation in non-FT builds - Thanks Tim P. * Cleanup mpi interface with missplaced {{{OPAL_CR_ENTER_LIBRARY}}} - Thanks Terry * Some other sundry cleanup items all dealing with C/R functionality in the trunk. This commit was SVN r18241.
2008-04-23 04:17:12 +04:00
free(tmp_env_var);
Move in some accumulated small features and minor bug fixes for C/R support. {{{ svn merge -r 16447:16475 https://svn.open-mpi.org/svn/ompi/tmp/jjh-fgs . }}} This commit was SVN r16478.
2007-10-17 17:47:36 +04:00
#endif
Extend the iof by adding two new components to support map-reduce IO chaining. Add a mapreduce tool for running such applications. Fix the state machine to support multiple jobs being simultaneously launched as this is not only required for mapreduce, but can happen under comm-spawn applications as well. This commit was SVN r26380.
2012-05-03 01:00:22 +04:00
/* if mapreduce set, flag it */
if (orted_globals.mapreduce) {
orte_map_reduce = true;
}
Daemonize prior to starting any progress threads This commit was SVN r28303.
2013-04-08 04:42:57 +04:00
/* detach from controlling terminal
* otherwise, remain attached so output can get to us
*/
if(!orte_debug_flag &&
!orte_debug_daemons_flag &&
orted_globals.daemonize) {
opal_daemon_init(NULL);
}
Purge whitespace from the repo
2015-06-24 06:59:57 +03:00
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
/* Set the flag telling OpenRTE that I am NOT a
* singleton, but am "infrastructure" - prevents setting
* up incorrect infrastructure that only a singleton would
* require.
*/
Modify the orte_process_info structure to handle a broader range of process types by replacing the individual booleans with a 32-bit bitmap. Use a set of #define's to define the individual bits, and a set of matching macros to test for them. Update the orte code base to use the macros instead of the booleans. Minor mod to the ompi layer to use the new #define's - just one-line name replacements. This commit was SVN r21144.
2009-05-04 15:07:40 +04:00
if (orted_globals.hnp) {
A patch from UTK to allow orte_init(), opal_init(), and associated friends also receive &argc and &argv (George asked Jeff to Ralph to review before committing). The thought is that passing argv and argc to opal/orte_init be useful to other projects outside of OMPI that are using OPAL and/or ORTE (especially in conjunction with some other bootstrapping code where it is helpful to modify argv). It's such a small thing that it's easy to apply here to make others' lives a little easier. Ask George for more details; I'm just the messenger. :-) Judging by the copyrights on this patch, it's been around for a while. :-) This commit was SVN r22260.
2009-12-04 03:51:15 +03:00
if (ORTE_SUCCESS != (ret = orte_init(&argc, &argv, ORTE_PROC_HNP))) {
Modify the orte_process_info structure to handle a broader range of process types by replacing the individual booleans with a 32-bit bitmap. Use a set of #define's to define the individual bits, and a set of matching macros to test for them. Update the orte code base to use the macros instead of the booleans. Minor mod to the ompi layer to use the new #define's - just one-line name replacements. This commit was SVN r21144.
2009-05-04 15:07:40 +04:00
ORTE_ERROR_LOG(ret);
return ret;
}
} else {
A patch from UTK to allow orte_init(), opal_init(), and associated friends also receive &argc and &argv (George asked Jeff to Ralph to review before committing). The thought is that passing argv and argc to opal/orte_init be useful to other projects outside of OMPI that are using OPAL and/or ORTE (especially in conjunction with some other bootstrapping code where it is helpful to modify argv). It's such a small thing that it's easy to apply here to make others' lives a little easier. Ask George for more details; I'm just the messenger. :-) Judging by the copyrights on this patch, it's been around for a while. :-) This commit was SVN r22260.
2009-12-04 03:51:15 +03:00
if (ORTE_SUCCESS != (ret = orte_init(&argc, &argv, ORTE_PROC_DAEMON))) {
Modify the orte_process_info structure to handle a broader range of process types by replacing the individual booleans with a 32-bit bitmap. Use a set of #define's to define the individual bits, and a set of matching macros to test for them. Update the orte code base to use the macros instead of the booleans. Minor mod to the ompi layer to use the new #define's - just one-line name replacements. This commit was SVN r21144.
2009-05-04 15:07:40 +04:00
ORTE_ERROR_LOG(ret);
return ret;
}
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
}
After a nice, calm, rational discussion between Brian, Jeff, and myself, we decided to revert r24864 and r24862 to restore the reference counters in opal_init/finalize. The rationale was that we should instead change orte_init/finalize to also use reference counters to support multi-embedded libraries. Jeff and Brian will discuss proposing a similar change to mpi_init/finalize to the MPI Forum so that all three libraries will behave in similar manners. It was agreed that opal_init_util had wound up being used in unintended ways, which raised the problem of getting reference counts to work right. However, fixing it would involve more pain than it was worth - and so long as the other layers are made to behave similarly, I have no preference either way. Complete implementation will follow - for now, this just reverts the prior changes. This commit was SVN r24886. The following SVN revision numbers were found above: r24862 --> open-mpi/ompi@aa92e0c4eb16b2a6ec5b323befa325eaa1d1c10a r24864 --> open-mpi/ompi@a5062385c27647cfb75478daa9b79e5daee84fd5
2011-07-12 21:07:41 +04:00
/* finalize the OPAL utils. As they are opened again from orte_init->opal_init
* we continue to have a reference count on them. So we have to finalize them twice...
*/
opal_finalize_util();
Okay, since a certain other RM out there made a fuss about being able to lock their daemons to specified cores, offer the same option here. The MCA param orte_daemon_cores can be used to specify which core(s) you want the orte daemons to use. This will have no bearing on the application procs - unbound will remain unbound, and binding directives will be applied to the apps. Yippee skippee... This commit was SVN r30513.
2014-01-31 03:50:14 +04:00
/* bind ourselves if so directed */
if (NULL != orte_daemon_cores) {
char **cores=NULL, tmp[128];
hwloc_obj_t pu;
hwloc_cpuset_t ours, pucpus, res;
int core;
/* could be a collection of comma-delimited ranges, so
* use our handy utility to parse it
*/
orte_util_parse_range_options(orte_daemon_cores, &cores);
if (NULL != cores) {
ours = hwloc_bitmap_alloc();
hwloc_bitmap_zero(ours);
pucpus = hwloc_bitmap_alloc();
res = hwloc_bitmap_alloc();
for (i=0; NULL != cores[i]; i++) {
core = strtoul(cores[i], NULL, 10);
Support physical processor ids in rankfile
2014-11-10 07:50:12 +03:00
if (NULL == (pu = opal_hwloc_base_get_pu(opal_hwloc_topology, core, OPAL_HWLOC_LOGICAL))) {
Okay, since a certain other RM out there made a fuss about being able to lock their daemons to specified cores, offer the same option here. The MCA param orte_daemon_cores can be used to specify which core(s) you want the orte daemons to use. This will have no bearing on the application procs - unbound will remain unbound, and binding directives will be applied to the apps. Yippee skippee... This commit was SVN r30513.
2014-01-31 03:50:14 +04:00
/* turn off the show help forwarding as we won't
* be able to cycle the event library to send
*/
orte_show_help_finalize();
/* the message will now come out locally */
orte_show_help("help-orted.txt", "orted:cannot-bind",
true, orte_process_info.nodename,
orte_daemon_cores);
ret = ORTE_ERR_NOT_SUPPORTED;
orte/orted: fix misc memory leaks
2015-06-03 08:55:24 +03:00
hwloc_bitmap_free(ours);
hwloc_bitmap_free(pucpus);
hwloc_bitmap_free(res);
Okay, since a certain other RM out there made a fuss about being able to lock their daemons to specified cores, offer the same option here. The MCA param orte_daemon_cores can be used to specify which core(s) you want the orte daemons to use. This will have no bearing on the application procs - unbound will remain unbound, and binding directives will be applied to the apps. Yippee skippee... This commit was SVN r30513.
2014-01-31 03:50:14 +04:00
goto DONE;
}
hwloc_bitmap_and(pucpus, pu->online_cpuset, pu->allowed_cpuset);
hwloc_bitmap_or(res, ours, pucpus);
hwloc_bitmap_copy(ours, res);
}
/* if the result is all zeros, then don't bind */
if (!hwloc_bitmap_iszero(ours)) {
(void)hwloc_set_cpubind(opal_hwloc_topology, ours, 0);
if (opal_hwloc_report_bindings) {
When pretty-printing binding info, we need to pass the topology down to the routine as the mapper isn't always working with the local topology - otherwise, we get an erroneous help message. Thanks to Tetsuya Mishima for reporting it cmr=v1.7.5:reviewer=rhc:subject=fix pretty-print of bindings This commit was SVN r30968.
2014-03-10 19:53:07 +04:00
opal_hwloc_base_cset2mapstr(tmp, sizeof(tmp), opal_hwloc_topology, ours);
Okay, since a certain other RM out there made a fuss about being able to lock their daemons to specified cores, offer the same option here. The MCA param orte_daemon_cores can be used to specify which core(s) you want the orte daemons to use. This will have no bearing on the application procs - unbound will remain unbound, and binding directives will be applied to the apps. Yippee skippee... This commit was SVN r30513.
2014-01-31 03:50:14 +04:00
opal_output(0, "Daemon %s is bound to cores %s",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME), tmp);
}
}
/* cleanup */
hwloc_bitmap_free(ours);
hwloc_bitmap_free(pucpus);
hwloc_bitmap_free(res);
opal_argv_free(cores);
}
}
Fix registration of error handlers thru the pmix120 component. A thread-shift operation was hanging on the sync_event_base, which made it dependent on someone calling opal_progress. Unfortunately, a process in "sleep" or spinning outside the MPI library won't do that, and so we never complete errhandler registration.
2016-03-03 01:30:57 +03:00
if ((int)ORTE_VPID_INVALID != orted_debug_failure) {
Upgrade the node/orted failure detection code to cover all environments. Use the native environment's capabilities where possible - e.g., SLURM detects orted failure and can report it. Elsewhere, use a heartbeat system to detect orted failure - e.g., for TM and rsh. Heart rate is set via mca param. The HNP checks for callback every 2*heartrate, declares orted failure if not seen in last 2*heartrate time. Also detect orted failed-to-start by setting timeout on launch. Currently only used in TM launcher. Neither detection is enabled by default, but are only active if heartrate is set and/or launch timeout is set. Exception for SLURM as orted failure is always detected and reported. More info to come on devel list. This commit was SVN r18555.
2008-06-03 01:46:34 +04:00
orted_globals.abort=false;
/* some vpid was ordered to fail. The value can be positive
* or negative, depending upon the desired method for failure,
* so need to check both here
*/
Fix registration of error handlers thru the pmix120 component. A thread-shift operation was hanging on the sync_event_base, which made it dependent on someone calling opal_progress. Unfortunately, a process in "sleep" or spinning outside the MPI library won't do that, and so we never complete errhandler registration.
2016-03-03 01:30:57 +03:00
if (0 > orted_debug_failure) {
orted_debug_failure = -1*orted_debug_failure;
Upgrade the node/orted failure detection code to cover all environments. Use the native environment's capabilities where possible - e.g., SLURM detects orted failure and can report it. Elsewhere, use a heartbeat system to detect orted failure - e.g., for TM and rsh. Heart rate is set via mca param. The HNP checks for callback every 2*heartrate, declares orted failure if not seen in last 2*heartrate time. Also detect orted failed-to-start by setting timeout on launch. Currently only used in TM launcher. Neither detection is enabled by default, but are only active if heartrate is set and/or launch timeout is set. Exception for SLURM as orted failure is always detected and reported. More info to come on devel list. This commit was SVN r18555.
2008-06-03 01:46:34 +04:00
orted_globals.abort = true;
}
/* are we the specified vpid? */
Fix registration of error handlers thru the pmix120 component. A thread-shift operation was hanging on the sync_event_base, which made it dependent on someone calling opal_progress. Unfortunately, a process in "sleep" or spinning outside the MPI library won't do that, and so we never complete errhandler registration.
2016-03-03 01:30:57 +03:00
if ((int)ORTE_PROC_MY_NAME->vpid == orted_debug_failure) {
Upgrade the node/orted failure detection code to cover all environments. Use the native environment's capabilities where possible - e.g., SLURM detects orted failure and can report it. Elsewhere, use a heartbeat system to detect orted failure - e.g., for TM and rsh. Heart rate is set via mca param. The HNP checks for callback every 2*heartrate, declares orted failure if not seen in last 2*heartrate time. Also detect orted failed-to-start by setting timeout on launch. Currently only used in TM launcher. Neither detection is enabled by default, but are only active if heartrate is set and/or launch timeout is set. Exception for SLURM as orted failure is always detected and reported. More info to come on devel list. This commit was SVN r18555.
2008-06-03 01:46:34 +04:00
/* if the user specified we delay, then setup a timer
* and have it kill us
*/
Fix registration of error handlers thru the pmix120 component. A thread-shift operation was hanging on the sync_event_base, which made it dependent on someone calling opal_progress. Unfortunately, a process in "sleep" or spinning outside the MPI library won't do that, and so we never complete errhandler registration.
2016-03-03 01:30:57 +03:00
if (0 < orted_debug_failure_delay) {
ORTE_TIMER_EVENT(orted_debug_failure_delay, 0, shutdown_callback, ORTE_SYS_PRI);
Purge whitespace from the repo
2015-06-24 06:59:57 +03:00
Upgrade the node/orted failure detection code to cover all environments. Use the native environment's capabilities where possible - e.g., SLURM detects orted failure and can report it. Elsewhere, use a heartbeat system to detect orted failure - e.g., for TM and rsh. Heart rate is set via mca param. The HNP checks for callback every 2*heartrate, declares orted failure if not seen in last 2*heartrate time. Also detect orted failed-to-start by setting timeout on launch. Currently only used in TM launcher. Neither detection is enabled by default, but are only active if heartrate is set and/or launch timeout is set. Exception for SLURM as orted failure is always detected and reported. More info to come on devel list. This commit was SVN r18555.
2008-06-03 01:46:34 +04:00
} else {
- Revert r20740 This commit was SVN r20741. The following SVN revision numbers were found above: r20740 --> open-mpi/ompi@2a70618a77d69c02354fa493c4e3235cfa45956f
2009-03-06 00:50:47 +03:00
opal_output(0, "%s is executing clean %s", ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
Upgrade the node/orted failure detection code to cover all environments. Use the native environment's capabilities where possible - e.g., SLURM detects orted failure and can report it. Elsewhere, use a heartbeat system to detect orted failure - e.g., for TM and rsh. Heart rate is set via mca param. The HNP checks for callback every 2*heartrate, declares orted failure if not seen in last 2*heartrate time. Also detect orted failed-to-start by setting timeout on launch. Currently only used in TM launcher. Neither detection is enabled by default, but are only active if heartrate is set and/or launch timeout is set. Exception for SLURM as orted failure is always detected and reported. More info to come on devel list. This commit was SVN r18555.
2008-06-03 01:46:34 +04:00
orted_globals.abort ? "abort" : "abnormal termination");
/* do -not- call finalize as this will send a message to the HNP
* indicating clean termination! Instead, just forcibly cleanup
* the local session_dir tree and exit
*/
orte_session_dir_cleanup(ORTE_JOBID_WILDCARD);
Purge whitespace from the repo
2015-06-24 06:59:57 +03:00
Upgrade the node/orted failure detection code to cover all environments. Use the native environment's capabilities where possible - e.g., SLURM detects orted failure and can report it. Elsewhere, use a heartbeat system to detect orted failure - e.g., for TM and rsh. Heart rate is set via mca param. The HNP checks for callback every 2*heartrate, declares orted failure if not seen in last 2*heartrate time. Also detect orted failed-to-start by setting timeout on launch. Currently only used in TM launcher. Neither detection is enabled by default, but are only active if heartrate is set and/or launch timeout is set. Exception for SLURM as orted failure is always detected and reported. More info to come on devel list. This commit was SVN r18555.
2008-06-03 01:46:34 +04:00
/* if we were ordered to abort, do so */
if (orted_globals.abort) {
abort();
}
Purge whitespace from the repo
2015-06-24 06:59:57 +03:00
Upgrade the node/orted failure detection code to cover all environments. Use the native environment's capabilities where possible - e.g., SLURM detects orted failure and can report it. Elsewhere, use a heartbeat system to detect orted failure - e.g., for TM and rsh. Heart rate is set via mca param. The HNP checks for callback every 2*heartrate, declares orted failure if not seen in last 2*heartrate time. Also detect orted failed-to-start by setting timeout on launch. Currently only used in TM launcher. Neither detection is enabled by default, but are only active if heartrate is set and/or launch timeout is set. Exception for SLURM as orted failure is always detected and reported. More info to come on devel list. This commit was SVN r18555.
2008-06-03 01:46:34 +04:00
/* otherwise, return with non-zero status */
Ensure that signals are de-trapped before exiting to stop the $#@@#$ event library from "asserting" This commit was SVN r20630.
2009-02-25 06:10:21 +03:00
ret = ORTE_ERROR_DEFAULT_EXIT_CODE;
goto DONE;
Upgrade the node/orted failure detection code to cover all environments. Use the native environment's capabilities where possible - e.g., SLURM detects orted failure and can report it. Elsewhere, use a heartbeat system to detect orted failure - e.g., for TM and rsh. Heart rate is set via mca param. The HNP checks for callback every 2*heartrate, declares orted failure if not seen in last 2*heartrate time. Also detect orted failed-to-start by setting timeout on launch. Currently only used in TM launcher. Neither detection is enabled by default, but are only active if heartrate is set and/or launch timeout is set. Exception for SLURM as orted failure is always detected and reported. More info to come on devel list. This commit was SVN r18555.
2008-06-03 01:46:34 +04:00
}
Cleanly handle the failed start of an orted, or its unexpected failure after start. This commit will allow mpirun to exit cleanly when this occurs, and does a best-effort attempt to cleanup the mess. However, it still has two unresolved issues that need to be eventually addressed: 1. it depends upon the ability of the native environment to alert us that the orted has died/failed to start. I have included that support for SLURM, but other environments need to be done. 2. for some yet-to-be-determined reason, the message that tells the remaining daemons to "die" isn't getting out of the RML, even though no obvious blockage is standing in the way. Work will continue on resolving that problem. For now, the orteds appear to be exiting on their own quite nicely when they see their HNP "lifeline" disappear. This represents the best-available fix for ticket #221 so I am closing that ticket at this time. This commit was SVN r18536.
2008-05-29 17:38:27 +04:00
}
}
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
/* insert our contact info into our process_info struct so we
* have it for later use and set the local daemon field to our name
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
*/
- Revert r20739 This commit was SVN r20742. The following SVN revision numbers were found above: r20739 --> open-mpi/ompi@781caee0b670ea169baead8facc23390112f094f
2009-03-06 00:56:03 +03:00
orte_process_info.my_daemon_uri = orte_rml.get_contact_info();
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
ORTE_PROC_MY_DAEMON->jobid = ORTE_PROC_MY_NAME->jobid;
ORTE_PROC_MY_DAEMON->vpid = ORTE_PROC_MY_NAME->vpid;
Purge whitespace from the repo
2015-06-24 06:59:57 +03:00
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
/* if I am also the hnp, then update that contact info field too */
Modify the orte_process_info structure to handle a broader range of process types by replacing the individual booleans with a 32-bit bitmap. Use a set of #define's to define the individual bits, and a set of matching macros to test for them. Update the orte code base to use the macros instead of the booleans. Minor mod to the ompi layer to use the new #define's - just one-line name replacements. This commit was SVN r21144.
2009-05-04 15:07:40 +04:00
if (ORTE_PROC_IS_HNP) {
- Revert r20739 This commit was SVN r20742. The following SVN revision numbers were found above: r20739 --> open-mpi/ompi@781caee0b670ea169baead8facc23390112f094f
2009-03-06 00:56:03 +03:00
orte_process_info.my_hnp_uri = orte_rml.get_contact_info();
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
ORTE_PROC_MY_HNP->jobid = ORTE_PROC_MY_NAME->jobid;
ORTE_PROC_MY_HNP->vpid = ORTE_PROC_MY_NAME->vpid;
}
Purge whitespace from the repo
2015-06-24 06:59:57 +03:00
Fix a potential, albeit perhaps esoteric, race condition that can occur for fast HNP's, slow orteds, and fast apps. Under those conditions, it is possible for the orted to be caught in its original send of contact info back to the HNP, and thus for the progress stack never to recover back to a high level. In those circumstances, the orted can "hang" when trying to exit. Add a new function to opal_progress that tells us our recursion depth to support that solution. Yes, I know this sounds picky, but good ol' Jeff managed to make it happen by driving his cluster near to death... Also ensure that we declare "failed" for the daemon job when daemons fail instead of the application job. This is important so that orte knows that it cannot use xcast to tell daemons to "exit", nor should it expect all daemons to respond. Otherwise, it is possible to hang. After lots of testing, decide to default (again) to slurm detecting failed orteds. This proved necessary to avoid rather annoying hangs that were difficult to recover from. There are conditions where slurm will fail to launch all daemons (slurm folks are working on it), and yet again, good ol' Jeff managed to find both of them. Thanks you Jeff! :-/ This commit was SVN r18611.
2008-06-06 23:36:27 +04:00
/* setup the primary daemon command receive function */
As per the RFC, bring in the ORTE async progress code and the rewrite of OOB: *** THIS RFC INCLUDES A MINOR CHANGE TO THE MPI-RTE INTERFACE *** Note: during the course of this work, it was necessary to completely separate the MPI and RTE progress engines. There were multiple places in the MPI layer where ORTE_WAIT_FOR_COMPLETION was being used. A new OMPI_WAIT_FOR_COMPLETION macro was created (defined in ompi/mca/rte/rte.h) that simply cycles across opal_progress until the provided flag becomes false. Places where the MPI layer blocked waiting for RTE to complete an event have been modified to use this macro. *************************************************************************************** I am reissuing this RFC because of the time that has passed since its original release. Since its initial release and review, I have debugged it further to ensure it fully supports tests like loop_spawn. It therefore seems ready for merge back to the trunk. Given its prior review, I have set the timeout for one week. The code is in https://bitbucket.org/rhc/ompi-oob2 WHAT: Rewrite of ORTE OOB WHY: Support asynchronous progress and a host of other features WHEN: Wed, August 21 SYNOPSIS: The current OOB has served us well, but a number of limitations have been identified over the years. Specifically: * it is only progressed when called via opal_progress, which can lead to hangs or recursive calls into libevent (which is not supported by that code) * we've had issues when multiple NICs are available as the code doesn't "shift" messages between transports - thus, all nodes had to be available via the same TCP interface. * the OOB "unloads" incoming opal_buffer_t objects during the transmission, thus preventing use of OBJ_RETAIN in the code when repeatedly sending the same message to multiple recipients * there is no failover mechanism across NICs - if the selected NIC (or its attached switch) fails, we are forced to abort * only one transport (i.e., component) can be "active" The revised OOB resolves these problems: * async progress is used for all application processes, with the progress thread blocking in the event library * each available TCP NIC is supported by its own TCP module. The ability to asynchronously progress each module independently is provided, but not enabled by default (a runtime MCA parameter turns it "on") * multi-address TCP NICs (e.g., a NIC with both an IPv4 and IPv6 address, or with virtual interfaces) are supported - reachability is determined by comparing the contact info for a peer against all addresses within the range covered by the address/mask pairs for the NIC. * a message that arrives on one TCP NIC is automatically shifted to whatever NIC that is connected to the next "hop" if that peer cannot be reached by the incoming NIC. If no TCP module will reach the peer, then the OOB attempts to send the message via all other available components - if none can reach the peer, then an "error" is reported back to the RML, which then calls the errmgr for instructions. * opal_buffer_t now conforms to standard object rules re OBJ_RETAIN as we no longer "unload" the incoming object * NIC failure is reported to the TCP component, which then tries to resend the message across any other available TCP NIC. If that doesn't work, then the message is given back to the OOB base to try using other components. If all that fails, then the error is reported to the RML, which reports to the errmgr for instructions * obviously from the above, multiple OOB components (e.g., TCP and UD) can be active in parallel * the matching code has been moved to the RML (and out of the OOB/TCP component) so it is independent of transport * routing is done by the individual OOB modules (as opposed to the RML). Thus, both routed and non-routed transports can simultaneously be active * all blocking send/recv APIs have been removed. Everything operates asynchronously. KNOWN LIMITATIONS: * although provision is made for component failover as described above, the code for doing so has not been fully implemented yet. At the moment, if all connections for a given peer fail, the errmgr is notified of a "lost connection", which by default results in termination of the job if it was a lifeline * the IPv6 code is present and compiles, but is not complete. Since the current IPv6 support in the OOB doesn't work anyway, I don't consider this a blocker * routing is performed at the individual module level, yet the active routed component is selected on a global basis. We probably should update that to reflect that different transports may need/choose to route in different ways * obviously, not every error path has been tested nor necessarily covered * determining abnormal termination is more challenging than in the old code as we now potentially have multiple ways of connecting to a process. Ideally, we would declare "connection failed" when *all* transports can no longer reach the process, but that requires some additional (possibly complex) code. For now, the code replicates the old behavior only somewhat modified - i.e., if a module sees its connection fail, it checks to see if it is a lifeline. If so, it notifies the errmgr that the lifeline is lost - otherwise, it notifies the errmgr that a non-lifeline connection was lost. * reachability is determined solely on the basis of a shared subnet address/mask - more sophisticated algorithms (e.g., the one used in the tcp btl) are required to handle routing via gateways * the RML needs to assign sequence numbers to each message on a per-peer basis. The receiving RML will then deliver messages in order, thus preventing out-of-order messaging in the case where messages travel across different transports or a message needs to be redirected/resent due to failure of a NIC This commit was SVN r29058.
2013-08-22 20:37:40 +04:00
orte_rml.recv_buffer_nb(ORTE_NAME_WILDCARD, ORTE_RML_TAG_DAEMON,
ORTE_RML_PERSISTENT, orte_daemon_recv, NULL);
Purge whitespace from the repo
2015-06-24 06:59:57 +03:00
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
/* output a message indicating we are alive, our name, and our pid
* for debugging purposes
*/
if (orte_debug_daemons_flag) {
reapply r15517 and r15520, which were removed in r15527 so that I could get the RML/OOB merge in slightly easier This commit was SVN r15530. The following SVN revision numbers were found above: r15517 --> open-mpi/ompi@41977fcc95e1a1b5658e3ca7a43fa4fadb801dcc r15520 --> open-mpi/ompi@9cbc9df1b8c1f95df52d1c8e7ba4cf1c2605e4bc r15527 --> open-mpi/ompi@2d17dd95169a96febbf38eef48912bf38fc65aa9
2007-07-20 06:34:29 +04:00
fprintf(stderr, "Daemon %s checking in as pid %ld on host %s\n",
- Revert r20739 This commit was SVN r20742. The following SVN revision numbers were found above: r20739 --> open-mpi/ompi@781caee0b670ea169baead8facc23390112f094f
2009-03-06 00:56:03 +03:00
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME), (long)orte_process_info.pid,
orte_process_info.nodename);
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
}
We do ''not'' want the orted to yield the processor more than necessary (it already uses blocking semantics while waiting for events on fd's, so it's not taking more cycles from MPI applications than necessary), or this can/will cause lengthy delays in orted processing. The problem we most recently saw was with routed OOB messages getting significantly delayed before being delivered to the target MPI processes. This was problematic for BTLs that use OOB messaging for wireup. There is a lengthy comment in orted_main.c that describes this in more detail. Setting the orted to not voluntarily call yield() prevents this bad behavior. The orted only runs in small bursts anyway (and blocks the rest of the time), so this is not harmful to application performance. This commit was SVN r16365.
2007-10-06 13:24:51 +04:00
/* We actually do *not* want the orted to voluntarily yield() the
processor more than necessary. The orted already blocks when
it is doing nothing, so it doesn't use any more CPU cycles than
it should; but when it *is* doing something, we do not want it
to be unnecessarily delayed because it voluntarily yielded the
processor in the middle of its work.
For example: when a message arrives at the orted, we want the
OS to wake up the orted in a timely fashion (which most OS's
seem good about doing) and then we want the orted to process
the message as fast as possible. If the orted yields and lets
aggressive MPI applications get the processor back, it may be a
long time before the OS schedules the orted to run again
(particularly if there is no IO event to wake it up). Hence,
routed OOB messages (for example) may be significantly delayed
before being delivered to MPI processes, which can be
problematic in some scenarios (e.g., COMM_SPAWN, BTL's that
require OOB messages for wireup, etc.). */
opal_progress_set_yield_when_idle(false);
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
Fixes trac:1160. There is still some other problem in the OOB, but we wanted to commit this to get wider testing. This commit was SVN r16445. The following Trac tickets were found above: Ticket 1160 --> https://svn.open-mpi.org/trac/ompi/ticket/1160
2007-10-15 19:41:36 +04:00
/* Change the default behavior of libevent such that we want to
continually block rather than blocking for the default timeout
and then looping around the progress engine again. There
should be nothing in the orted that cannot block in libevent
until "something" happens (i.e., there's no need to keep
cycling through progress because the only things that should
happen will happen in libevent). This is a minor optimization,
but what the heck... :-) */
opal_progress_set_event_flag(OPAL_EVLOOP_ONCE);
Singletons currently start out by spawning an HNP - this is required solely in the cases where the singleton subsequently calls MPI_Comm_spawn or publishes port info without support from an external orte-server. In all other cases, the HNP is of no value and can actually be a detriment by creating additional overhead on the node. This is particularly concerning for async operations where processes may begin as singletons and then dynamically wireup to perform pt2pt communications. So we now allow singletons to start on their own, only spawning an HNP when initiating an operation that actually requires it. cmr:v1.7.4:reviewer=jsquyres This commit was SVN r29354.
2013-10-04 06:58:26 +04:00
/* if requested, report my uri to the indicated pipe */
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
if (orted_globals.uri_pipe > 0) {
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
orte_job_t *jdata;
orte_proc_t *proc;
Sorry for mid-day commit, but I had promised on the call to do this upon my return. Roll in the ORTE state machine. Remove last traces of opal_sos. Remove UTK epoch code. Please see the various emails about the state machine change for details. I'll send something out later with more info on the new arch. This commit was SVN r26242.
2012-04-06 18:23:13 +04:00
orte_node_t *node;
These changes were mostly captured in a prior RFC (except for #2 below) and are aimed specifically at improving startup performance and setting up the remaining modifications described in that RFC. The commit has been tested for C/R and Cray operations, and on Odin (SLURM, rsh) and RoadRunner (TM). I tried to update all environments, but obviously could not test them. I know that Windows needs some work, and have highlighted what is know to be needed in the odls process component. This represents a lot of work by Brian, Tim P, Josh, and myself, with much advice from Jeff and others. For posterity, I have appended a copy of the email describing the work that was done: As we have repeatedly noted, the modex operation in MPI_Init is the single greatest consumer of time during startup. To-date, we have executed that operation as an ORTE stage gate that held the process until a startup message containing all required modex (and OOB contact info - see #3 below) info could be sent to it. Each process would send its data to the HNP's registry, which assembled and sent the message when all processes had reported in. In addition, ORTE had taken responsibility for monitoring process status as it progressed through a series of "stage gates". The process reported its status at each gate, and ORTE would then send a "release" message once all procs had reported in. The incoming changes revamp these procedures in three ways: 1. eliminating the ORTE stage gate system and cleanly delineating responsibility between the OMPI and ORTE layers for MPI init/finalize. The modex stage gate (STG1) has been replaced by a collective operation in the modex itself that performs an allgather on the required modex info. The allgather is implemented using the orte_grpcomm framework since the BTL's are not active at that point. At the moment, the grpcomm framework only has a "basic" component analogous to OMPI's "basic" coll framework - I would recommend that the MPI team create additional, more advanced components to improve performance of this step. The other stage gates have been replaced by orte_grpcomm barrier functions. We tried to use MPI barriers instead (since the BTL's are active at that point), but - as we discussed on the telecon - these are not currently true barriers so the job would hang when we fell through while messages were still in process. Note that the grpcomm barrier doesn't actually resolve that problem, but Brian has pointed out that we are unlikely to ever see it violated. Again, you might want to spend a little time on an advanced barrier algorithm as the one in "basic" is very simplistic. Summarizing this change: ORTE no longer tracks process state nor has direct responsibility for synchronizing jobs. This is now done via collective operations within the MPI layer, albeit using ORTE collective communication services. I -strongly- urge the MPI team to implement advanced collective algorithms to improve the performance of this critical procedure. 2. reducing the volume of data exchanged during modex. Data in the modex consisted of the process name, the name of the node where that process is located (expressed as a string), plus a string representation of all contact info. The nodename was required in order for the modex to determine if the process was local or not - in addition, some people like to have it to print pretty error messages when a connection failed. The size of this data has been reduced in three ways: (a) reducing the size of the process name itself. The process name consisted of two 32-bit fields for the jobid and vpid. This is far larger than any current system, or system likely to exist in the near future, can support. Accordingly, the default size of these fields has been reduced to 16-bits, which means you can have 32k procs in each of 32k jobs. Since the daemons must have a vpid, and we require one daemon/node, this also restricts the default configuration to 32k nodes. To support any future "mega-clusters", a configuration option --enable-jumbo-apps has been added. This option increases the jobid and vpid field sizes to 32-bits. Someday, if necessary, someone can add yet another option to increase them to 64-bits, I suppose. (b) replacing the string nodename with an integer nodeid. Since we have one daemon/node, the nodeid corresponds to the local daemon's vpid. This replaces an often lengthy string with only 2 (or at most 4) bytes, a substantial reduction. (c) when the mca param requesting that nodenames be sent to support pretty error messages, a second mca param is now used to request FQDN - otherwise, the domain name is stripped (by default) from the message to save space. If someone wants to combine those into a single param somehow (perhaps with an argument?), they are welcome to do so - I didn't want to alter what people are already using. While these may seem like small savings, they actually amount to a significant impact when aggregated across the entire modex operation. Since every proc must receive the modex data regardless of the collective used to send it, just reducing the size of the process name removes nearly 400MBytes of communication from a 32k proc job (admittedly, much of this comm may occur in parallel). So it does add up pretty quickly. 3. routing RML messages to reduce connections. The default messaging system remains point-to-point - i.e., each proc opens a socket to every proc it communicates with and sends its messages directly. A new option uses the orteds as routers - i.e., each proc only opens a single socket to its local orted. All messages are sent from the proc to the orted, which forwards the message to the orted on the node where the intended recipient proc is located - that orted then forwards the message to its local proc (the recipient). This greatly reduces the connection storm we have encountered during startup. It also has the benefit of removing the sharing of every proc's OOB contact with every other proc. The orted routing tables are populated during launch since every orted gets a map of where every proc is being placed. Each proc, therefore, only needs to know the contact info for its local daemon, which is passed in via the environment when the proc is fork/exec'd by the daemon. This alone removes ~50 bytes/process of communication that was in the current STG1 startup message - so for our 32k proc job, this saves us roughly 32k*50 = 1.6MBytes sent to 32k procs = 51GBytes of messaging. Note that you can use the new routing method by specifying -mca routed tree - if you so desire. This mode will become the default at some point in the future. There are a few minor additional changes in the commit that I'll just note in passing: * propagation of command line mca params to the orteds - fixes ticket #1073. See note there for details. * requiring of "finalize" prior to "exit" for MPI procs - fixes ticket #1144. See note there for details. * cleanup of some stale header files This commit was SVN r16364.
2007-10-05 23:48:23 +04:00
orte_app_context_t *app;
Added new solaris sysinfo module. Also added code to assign orte_local_chip_type and orte_local_chip_model in MPI processes it the appropriate sysinfo module found the values on the machine. This commit was SVN r23581.
2010-08-09 23:28:56 +04:00
char *tmp, *nptr, *sysinfo;
Integrate PMIx 1.0 with OMPI. Bring Slurm PMI-1 component online Bring the s2 component online Little cleanup - let the various PMIx modules set the process name during init, and then just raise it up to the ORTE level. Required as the different PMI environments all pass the jobid in different ways. Bring the OMPI pubsub/pmi component online Get comm_spawn working again Ensure we always provide a cpuset, even if it is NULL pmix/cray: adjust cray pmix component for pmix Make changes so cray pmix can work within the integrated ompi/pmix framework. Bring singletons back online. Implement the comm_spawn operation using pmix - not tested yet Cleanup comm_spawn - procs now starting, error in connect_accept Complete integration
2015-06-18 19:53:20 +03:00
char **singenv=NULL;
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
These changes were mostly captured in a prior RFC (except for #2 below) and are aimed specifically at improving startup performance and setting up the remaining modifications described in that RFC. The commit has been tested for C/R and Cray operations, and on Odin (SLURM, rsh) and RoadRunner (TM). I tried to update all environments, but obviously could not test them. I know that Windows needs some work, and have highlighted what is know to be needed in the odls process component. This represents a lot of work by Brian, Tim P, Josh, and myself, with much advice from Jeff and others. For posterity, I have appended a copy of the email describing the work that was done: As we have repeatedly noted, the modex operation in MPI_Init is the single greatest consumer of time during startup. To-date, we have executed that operation as an ORTE stage gate that held the process until a startup message containing all required modex (and OOB contact info - see #3 below) info could be sent to it. Each process would send its data to the HNP's registry, which assembled and sent the message when all processes had reported in. In addition, ORTE had taken responsibility for monitoring process status as it progressed through a series of "stage gates". The process reported its status at each gate, and ORTE would then send a "release" message once all procs had reported in. The incoming changes revamp these procedures in three ways: 1. eliminating the ORTE stage gate system and cleanly delineating responsibility between the OMPI and ORTE layers for MPI init/finalize. The modex stage gate (STG1) has been replaced by a collective operation in the modex itself that performs an allgather on the required modex info. The allgather is implemented using the orte_grpcomm framework since the BTL's are not active at that point. At the moment, the grpcomm framework only has a "basic" component analogous to OMPI's "basic" coll framework - I would recommend that the MPI team create additional, more advanced components to improve performance of this step. The other stage gates have been replaced by orte_grpcomm barrier functions. We tried to use MPI barriers instead (since the BTL's are active at that point), but - as we discussed on the telecon - these are not currently true barriers so the job would hang when we fell through while messages were still in process. Note that the grpcomm barrier doesn't actually resolve that problem, but Brian has pointed out that we are unlikely to ever see it violated. Again, you might want to spend a little time on an advanced barrier algorithm as the one in "basic" is very simplistic. Summarizing this change: ORTE no longer tracks process state nor has direct responsibility for synchronizing jobs. This is now done via collective operations within the MPI layer, albeit using ORTE collective communication services. I -strongly- urge the MPI team to implement advanced collective algorithms to improve the performance of this critical procedure. 2. reducing the volume of data exchanged during modex. Data in the modex consisted of the process name, the name of the node where that process is located (expressed as a string), plus a string representation of all contact info. The nodename was required in order for the modex to determine if the process was local or not - in addition, some people like to have it to print pretty error messages when a connection failed. The size of this data has been reduced in three ways: (a) reducing the size of the process name itself. The process name consisted of two 32-bit fields for the jobid and vpid. This is far larger than any current system, or system likely to exist in the near future, can support. Accordingly, the default size of these fields has been reduced to 16-bits, which means you can have 32k procs in each of 32k jobs. Since the daemons must have a vpid, and we require one daemon/node, this also restricts the default configuration to 32k nodes. To support any future "mega-clusters", a configuration option --enable-jumbo-apps has been added. This option increases the jobid and vpid field sizes to 32-bits. Someday, if necessary, someone can add yet another option to increase them to 64-bits, I suppose. (b) replacing the string nodename with an integer nodeid. Since we have one daemon/node, the nodeid corresponds to the local daemon's vpid. This replaces an often lengthy string with only 2 (or at most 4) bytes, a substantial reduction. (c) when the mca param requesting that nodenames be sent to support pretty error messages, a second mca param is now used to request FQDN - otherwise, the domain name is stripped (by default) from the message to save space. If someone wants to combine those into a single param somehow (perhaps with an argument?), they are welcome to do so - I didn't want to alter what people are already using. While these may seem like small savings, they actually amount to a significant impact when aggregated across the entire modex operation. Since every proc must receive the modex data regardless of the collective used to send it, just reducing the size of the process name removes nearly 400MBytes of communication from a 32k proc job (admittedly, much of this comm may occur in parallel). So it does add up pretty quickly. 3. routing RML messages to reduce connections. The default messaging system remains point-to-point - i.e., each proc opens a socket to every proc it communicates with and sends its messages directly. A new option uses the orteds as routers - i.e., each proc only opens a single socket to its local orted. All messages are sent from the proc to the orted, which forwards the message to the orted on the node where the intended recipient proc is located - that orted then forwards the message to its local proc (the recipient). This greatly reduces the connection storm we have encountered during startup. It also has the benefit of removing the sharing of every proc's OOB contact with every other proc. The orted routing tables are populated during launch since every orted gets a map of where every proc is being placed. Each proc, therefore, only needs to know the contact info for its local daemon, which is passed in via the environment when the proc is fork/exec'd by the daemon. This alone removes ~50 bytes/process of communication that was in the current STG1 startup message - so for our 32k proc job, this saves us roughly 32k*50 = 1.6MBytes sent to 32k procs = 51GBytes of messaging. Note that you can use the new routing method by specifying -mca routed tree - if you so desire. This mode will become the default at some point in the future. There are a few minor additional changes in the commit that I'll just note in passing: * propagation of command line mca params to the orteds - fixes ticket #1073. See note there for details. * requiring of "finalize" prior to "exit" for MPI procs - fixes ticket #1144. See note there for details. * cleanup of some stale header files This commit was SVN r16364.
2007-10-05 23:48:23 +04:00
/* setup the singleton's job */
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
jdata = OBJ_NEW(orte_job_t);
Minor cleanups to handle comm_spawn and singletons
2015-01-27 16:14:36 +03:00
/* default to ompi for now */
Further enhance the support for Singularity containers. Extend the "personality" command-line option to allow specifying both model (e.g., "ompi") and container (e.g., "singularity"), and add the necessary logic to support multiple options. Add a new pmix "isolated" component to handle singletons where no HNP is available since containers cannot launch the HNP.
2016-02-17 19:32:17 +03:00
opal_argv_append_nosize(&jdata->personality, "ompi");
Continue implementation of resilient operations by supporting reuse of jobids for restarted procs. Ensure that restarted processes have valid node and local ranks, and that node rank values are passed to direct-launched processes. This commit was SVN r21385.
2009-06-06 05:08:47 +04:00
orte_plm_base_create_jobid(jdata);
Convert the orte_job_data pointer array to a hash table so it doesn't grow forever as we run lots and lots of jobs in the persistent DVM.
2016-02-16 17:51:20 +03:00
opal_hash_table_set_value_uint32(orte_job_data, jdata->jobid, jdata);
Roll in the rest of the modex change. Eliminate all non-modex API access of RTE info from the MPI layer - in some cases, the info was already present (either in the ompi_proc_t or in the orte_process_info struct) and no call was necessary. This removes all calls to orte_ess from the MPI layer. Calls to orte_grpcomm remain required. Update all the orte ess components to remove their associated APIs for retrieving proc data. Update the grpcomm API to reflect transfer of set/get modex info to the db framework. Note that this doesn't recreate the old GPR. This is strictly a local db storage that may (at some point) obtain any missing data from the local daemon as part of an async methodology. The framework allows us to experiment with such methods without perturbing the default one. This commit was SVN r26678.
2012-06-27 18:53:55 +04:00
Fix singleton comm_spawn by having the host orted create a map object for the singleton job. Even though this isn't filled in, the pidmap function will ignore any job that doesn't have a map object. Thus, this ensures that the singleton's location is included in the pidmap, thereby allowing messages to be routed to/from it. This commit was SVN r23430.
2010-07-18 06:48:17 +04:00
/* must create a map for it (even though it has no
* info in it) so that the job info will be picked
* up in subsequent pidmaps or other daemons won't
* know how to route
*/
jdata->map = OBJ_NEW(orte_job_map_t);
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
/* setup an app_context for the singleton */
These changes were mostly captured in a prior RFC (except for #2 below) and are aimed specifically at improving startup performance and setting up the remaining modifications described in that RFC. The commit has been tested for C/R and Cray operations, and on Odin (SLURM, rsh) and RoadRunner (TM). I tried to update all environments, but obviously could not test them. I know that Windows needs some work, and have highlighted what is know to be needed in the odls process component. This represents a lot of work by Brian, Tim P, Josh, and myself, with much advice from Jeff and others. For posterity, I have appended a copy of the email describing the work that was done: As we have repeatedly noted, the modex operation in MPI_Init is the single greatest consumer of time during startup. To-date, we have executed that operation as an ORTE stage gate that held the process until a startup message containing all required modex (and OOB contact info - see #3 below) info could be sent to it. Each process would send its data to the HNP's registry, which assembled and sent the message when all processes had reported in. In addition, ORTE had taken responsibility for monitoring process status as it progressed through a series of "stage gates". The process reported its status at each gate, and ORTE would then send a "release" message once all procs had reported in. The incoming changes revamp these procedures in three ways: 1. eliminating the ORTE stage gate system and cleanly delineating responsibility between the OMPI and ORTE layers for MPI init/finalize. The modex stage gate (STG1) has been replaced by a collective operation in the modex itself that performs an allgather on the required modex info. The allgather is implemented using the orte_grpcomm framework since the BTL's are not active at that point. At the moment, the grpcomm framework only has a "basic" component analogous to OMPI's "basic" coll framework - I would recommend that the MPI team create additional, more advanced components to improve performance of this step. The other stage gates have been replaced by orte_grpcomm barrier functions. We tried to use MPI barriers instead (since the BTL's are active at that point), but - as we discussed on the telecon - these are not currently true barriers so the job would hang when we fell through while messages were still in process. Note that the grpcomm barrier doesn't actually resolve that problem, but Brian has pointed out that we are unlikely to ever see it violated. Again, you might want to spend a little time on an advanced barrier algorithm as the one in "basic" is very simplistic. Summarizing this change: ORTE no longer tracks process state nor has direct responsibility for synchronizing jobs. This is now done via collective operations within the MPI layer, albeit using ORTE collective communication services. I -strongly- urge the MPI team to implement advanced collective algorithms to improve the performance of this critical procedure. 2. reducing the volume of data exchanged during modex. Data in the modex consisted of the process name, the name of the node where that process is located (expressed as a string), plus a string representation of all contact info. The nodename was required in order for the modex to determine if the process was local or not - in addition, some people like to have it to print pretty error messages when a connection failed. The size of this data has been reduced in three ways: (a) reducing the size of the process name itself. The process name consisted of two 32-bit fields for the jobid and vpid. This is far larger than any current system, or system likely to exist in the near future, can support. Accordingly, the default size of these fields has been reduced to 16-bits, which means you can have 32k procs in each of 32k jobs. Since the daemons must have a vpid, and we require one daemon/node, this also restricts the default configuration to 32k nodes. To support any future "mega-clusters", a configuration option --enable-jumbo-apps has been added. This option increases the jobid and vpid field sizes to 32-bits. Someday, if necessary, someone can add yet another option to increase them to 64-bits, I suppose. (b) replacing the string nodename with an integer nodeid. Since we have one daemon/node, the nodeid corresponds to the local daemon's vpid. This replaces an often lengthy string with only 2 (or at most 4) bytes, a substantial reduction. (c) when the mca param requesting that nodenames be sent to support pretty error messages, a second mca param is now used to request FQDN - otherwise, the domain name is stripped (by default) from the message to save space. If someone wants to combine those into a single param somehow (perhaps with an argument?), they are welcome to do so - I didn't want to alter what people are already using. While these may seem like small savings, they actually amount to a significant impact when aggregated across the entire modex operation. Since every proc must receive the modex data regardless of the collective used to send it, just reducing the size of the process name removes nearly 400MBytes of communication from a 32k proc job (admittedly, much of this comm may occur in parallel). So it does add up pretty quickly. 3. routing RML messages to reduce connections. The default messaging system remains point-to-point - i.e., each proc opens a socket to every proc it communicates with and sends its messages directly. A new option uses the orteds as routers - i.e., each proc only opens a single socket to its local orted. All messages are sent from the proc to the orted, which forwards the message to the orted on the node where the intended recipient proc is located - that orted then forwards the message to its local proc (the recipient). This greatly reduces the connection storm we have encountered during startup. It also has the benefit of removing the sharing of every proc's OOB contact with every other proc. The orted routing tables are populated during launch since every orted gets a map of where every proc is being placed. Each proc, therefore, only needs to know the contact info for its local daemon, which is passed in via the environment when the proc is fork/exec'd by the daemon. This alone removes ~50 bytes/process of communication that was in the current STG1 startup message - so for our 32k proc job, this saves us roughly 32k*50 = 1.6MBytes sent to 32k procs = 51GBytes of messaging. Note that you can use the new routing method by specifying -mca routed tree - if you so desire. This mode will become the default at some point in the future. There are a few minor additional changes in the commit that I'll just note in passing: * propagation of command line mca params to the orteds - fixes ticket #1073. See note there for details. * requiring of "finalize" prior to "exit" for MPI procs - fixes ticket #1144. See note there for details. * cleanup of some stale header files This commit was SVN r16364.
2007-10-05 23:48:23 +04:00
app = OBJ_NEW(orte_app_context_t);
app->app = strdup("singleton");
app->num_procs = 1;
Replace all occurences of orte_pointer_array by opal_pointer_array. Remove the implementation of orte_pointer_array. This commit was SVN r17636.
2008-02-28 08:32:23 +03:00
opal_pointer_array_add(jdata->apps, app);
Fix a number of issues, some of which have lingered for a long time: * provide a more reliable way of determining that a process is a singleton by leveraging the schizo framework. Add new components for slurm, alps, and orte to detect when we are in a managed environment, and if we have been launched by mpirun or a native launcher. Set the correct envars to control ess and pmix selection in each case. * change the relative priority of the pmix120 and pmix112 components to make pmix120 the default * fix singleton comm-spawn by correctly setting the num_apps field of the orte_job_t created by the daemon - this fixes a segfault in register_nspace on newly created daemons * ensure orterun doesn't propagate any ess or pmix directives in its environment * Cleanup a few valgrind issues and memory leaks * Fix a race condition that prevented the client from completing notification registrations (missing thread shift) * Ensure the shizo/alps component detects launch by mpirun
2016-02-25 20:05:38 +03:00
jdata->num_apps = 1;
Purge whitespace from the repo
2015-06-24 06:59:57 +03:00
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
/* setup a proc object for the singleton - since we
* -must- be the HNP, and therefore we stored our
* node on the global node pool, and since the singleton
* -must- be on the same node as us, indicate that
*/
proc = OBJ_NEW(orte_proc_t);
proc->name.jobid = jdata->jobid;
proc->name.vpid = 0;
Fix singleton comm-spawn, yet again. The new grpcomm collectives require a complete knowledge of every active proc in the system in case they participate in a collective. So ensure we pass the required job info when we spawn new daemons, and construct the necessary connections to allow grpcomm to operate.
2014-12-04 05:09:28 +03:00
proc->parent = 0;
Per RFC: http://www.open-mpi.org/community/lists/devel/2014/05/14822.php Revamp the ORTE global data structures to reduce memory footprint and add new features. Add ability to control/set cpu frequency, though this can only be done if the sys admin has setup the system to support it (or you run as root). This commit was SVN r31916.
2014-06-01 20:14:10 +04:00
ORTE_FLAG_SET(proc, ORTE_PROC_FLAG_ALIVE);
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
proc->state = ORTE_PROC_STATE_RUNNING;
proc->app_idx = 0;
Roll in the rest of the modex change. Eliminate all non-modex API access of RTE info from the MPI layer - in some cases, the info was already present (either in the ompi_proc_t or in the orte_process_info struct) and no call was necessary. This removes all calls to orte_ess from the MPI layer. Calls to orte_grpcomm remain required. Update all the orte ess components to remove their associated APIs for retrieving proc data. Update the grpcomm API to reflect transfer of set/get modex info to the db framework. Note that this doesn't recreate the old GPR. This is strictly a local db storage that may (at some point) obtain any missing data from the local daemon as part of an async methodology. The framework allows us to experiment with such methods without perturbing the default one. This commit was SVN r26678.
2012-06-27 18:53:55 +04:00
/* obviously, it is on my node */
Sorry for mid-day commit, but I had promised on the call to do this upon my return. Roll in the ORTE state machine. Remove last traces of opal_sos. Remove UTK epoch code. Please see the various emails about the state machine change for details. I'll send something out later with more info on the new arch. This commit was SVN r26242.
2012-04-06 18:23:13 +04:00
node = (orte_node_t*)opal_pointer_array_get_item(orte_node_pool, 0);
proc->node = node;
OBJ_RETAIN(node); /* keep accounting straight */
Replace all occurences of orte_pointer_array by opal_pointer_array. Remove the implementation of orte_pointer_array. This commit was SVN r17636.
2008-02-28 08:32:23 +03:00
opal_pointer_array_add(jdata->procs, proc);
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
jdata->num_procs = 1;
Fix singleton comm-spawn, yet again. The new grpcomm collectives require a complete knowledge of every active proc in the system in case they participate in a collective. So ensure we pass the required job info when we spawn new daemons, and construct the necessary connections to allow grpcomm to operate.
2014-12-04 05:09:28 +03:00
/* add the node to the job map */
OBJ_RETAIN(node);
opal_pointer_array_add(jdata->map->nodes, node);
jdata->map->num_nodes++;
If the orted HNP is spawned by a singleton, then it needs to harvest all the MCA params from its environment to ensure they are passed on to any subsequently spawned daemons. Otherwise, the singleton could be directed to select options that other apps miss. This commit was SVN r27221.
2012-09-04 05:10:26 +04:00
/* and it obviously is on the node */
OBJ_RETAIN(proc);
opal_pointer_array_add(node->procs, proc);
node->num_procs++;
Roll in the rest of the modex change. Eliminate all non-modex API access of RTE info from the MPI layer - in some cases, the info was already present (either in the ompi_proc_t or in the orte_process_info struct) and no call was necessary. This removes all calls to orte_ess from the MPI layer. Calls to orte_grpcomm remain required. Update all the orte ess components to remove their associated APIs for retrieving proc data. Update the grpcomm API to reflect transfer of set/get modex info to the db framework. Note that this doesn't recreate the old GPR. This is strictly a local db storage that may (at some point) obtain any missing data from the local daemon as part of an async methodology. The framework allows us to experiment with such methods without perturbing the default one. This commit was SVN r26678.
2012-06-27 18:53:55 +04:00
/* and obviously it is one of my local procs */
Some minor cleanups. Get singletons working. Cleanup abort handling so it gets properly identified. This commit was SVN r26261.
2012-04-10 23:08:54 +04:00
OBJ_RETAIN(proc);
opal_pointer_array_add(orte_local_children, proc);
Sorry for mid-day commit, but I had promised on the call to do this upon my return. Roll in the ORTE state machine. Remove last traces of opal_sos. Remove UTK epoch code. Please see the various emails about the state machine change for details. I'll send something out later with more info on the new arch. This commit was SVN r26242.
2012-04-06 18:23:13 +04:00
jdata->num_local_procs = 1;
Roll in the rest of the modex change. Eliminate all non-modex API access of RTE info from the MPI layer - in some cases, the info was already present (either in the ompi_proc_t or in the orte_process_info struct) and no call was necessary. This removes all calls to orte_ess from the MPI layer. Calls to orte_grpcomm remain required. Update all the orte ess components to remove their associated APIs for retrieving proc data. Update the grpcomm API to reflect transfer of set/get modex info to the db framework. Note that this doesn't recreate the old GPR. This is strictly a local db storage that may (at some point) obtain any missing data from the local daemon as part of an async methodology. The framework allows us to experiment with such methods without perturbing the default one. This commit was SVN r26678.
2012-06-27 18:53:55 +04:00
/* set the trivial */
proc->local_rank = 0;
proc->node_rank = 0;
proc->app_rank = 0;
proc->state = ORTE_PROC_STATE_RUNNING;
proc->app_idx = 0;
Per RFC: http://www.open-mpi.org/community/lists/devel/2014/05/14822.php Revamp the ORTE global data structures to reduce memory footprint and add new features. Add ability to control/set cpu frequency, though this can only be done if the sys admin has setup the system to support it (or you run as root). This commit was SVN r31916.
2014-06-01 20:14:10 +04:00
ORTE_FLAG_SET(proc, ORTE_PROC_FLAG_LOCAL);
Roll in the rest of the modex change. Eliminate all non-modex API access of RTE info from the MPI layer - in some cases, the info was already present (either in the ompi_proc_t or in the orte_process_info struct) and no call was necessary. This removes all calls to orte_ess from the MPI layer. Calls to orte_grpcomm remain required. Update all the orte ess components to remove their associated APIs for retrieving proc data. Update the grpcomm API to reflect transfer of set/get modex info to the db framework. Note that this doesn't recreate the old GPR. This is strictly a local db storage that may (at some point) obtain any missing data from the local daemon as part of an async methodology. The framework allows us to experiment with such methods without perturbing the default one. This commit was SVN r26678.
2012-06-27 18:53:55 +04:00
Integrate PMIx 1.0 with OMPI. Bring Slurm PMI-1 component online Bring the s2 component online Little cleanup - let the various PMIx modules set the process name during init, and then just raise it up to the ORTE level. Required as the different PMI environments all pass the jobid in different ways. Bring the OMPI pubsub/pmi component online Get comm_spawn working again Ensure we always provide a cpuset, even if it is NULL pmix/cray: adjust cray pmix component for pmix Make changes so cray pmix can work within the integrated ompi/pmix framework. Bring singletons back online. Implement the comm_spawn operation using pmix - not tested yet Cleanup comm_spawn - procs now starting, error in connect_accept Complete integration
2015-06-18 19:53:20 +03:00
/* register the singleton's nspace with our PMIx server */
if (ORTE_SUCCESS != (ret = orte_pmix_server_register_nspace(jdata))) {
ORTE_ERROR_LOG(ret);
goto DONE;
}
/* use setup fork to create the envars needed by the singleton */
if (OPAL_SUCCESS != (ret = opal_pmix.server_setup_fork(&proc->name, &singenv))) {
ORTE_ERROR_LOG(ret);
goto DONE;
}
nptr = opal_argv_join(singenv, ',');
opal_argv_free(singenv);
/* create a string that contains our uri + sysinfo + PMIx server URI envars */
Added new solaris sysinfo module. Also added code to assign orte_local_chip_type and orte_local_chip_model in MPI processes it the appropriate sysinfo module found the values on the machine. This commit was SVN r23581.
2010-08-09 23:28:56 +04:00
orte_util_convert_sysinfo_to_string(&sysinfo, orte_local_cpu_type, orte_local_cpu_model);
Integrate PMIx 1.0 with OMPI. Bring Slurm PMI-1 component online Bring the s2 component online Little cleanup - let the various PMIx modules set the process name during init, and then just raise it up to the ORTE level. Required as the different PMI environments all pass the jobid in different ways. Bring the OMPI pubsub/pmi component online Get comm_spawn working again Ensure we always provide a cpuset, even if it is NULL pmix/cray: adjust cray pmix component for pmix Make changes so cray pmix can work within the integrated ompi/pmix framework. Bring singletons back online. Implement the comm_spawn operation using pmix - not tested yet Cleanup comm_spawn - procs now starting, error in connect_accept Complete integration
2015-06-18 19:53:20 +03:00
asprintf(&tmp, "%s[%s]%s", orte_process_info.my_daemon_uri, sysinfo, nptr);
free(sysinfo);
free(nptr);
These changes were mostly captured in a prior RFC (except for #2 below) and are aimed specifically at improving startup performance and setting up the remaining modifications described in that RFC. The commit has been tested for C/R and Cray operations, and on Odin (SLURM, rsh) and RoadRunner (TM). I tried to update all environments, but obviously could not test them. I know that Windows needs some work, and have highlighted what is know to be needed in the odls process component. This represents a lot of work by Brian, Tim P, Josh, and myself, with much advice from Jeff and others. For posterity, I have appended a copy of the email describing the work that was done: As we have repeatedly noted, the modex operation in MPI_Init is the single greatest consumer of time during startup. To-date, we have executed that operation as an ORTE stage gate that held the process until a startup message containing all required modex (and OOB contact info - see #3 below) info could be sent to it. Each process would send its data to the HNP's registry, which assembled and sent the message when all processes had reported in. In addition, ORTE had taken responsibility for monitoring process status as it progressed through a series of "stage gates". The process reported its status at each gate, and ORTE would then send a "release" message once all procs had reported in. The incoming changes revamp these procedures in three ways: 1. eliminating the ORTE stage gate system and cleanly delineating responsibility between the OMPI and ORTE layers for MPI init/finalize. The modex stage gate (STG1) has been replaced by a collective operation in the modex itself that performs an allgather on the required modex info. The allgather is implemented using the orte_grpcomm framework since the BTL's are not active at that point. At the moment, the grpcomm framework only has a "basic" component analogous to OMPI's "basic" coll framework - I would recommend that the MPI team create additional, more advanced components to improve performance of this step. The other stage gates have been replaced by orte_grpcomm barrier functions. We tried to use MPI barriers instead (since the BTL's are active at that point), but - as we discussed on the telecon - these are not currently true barriers so the job would hang when we fell through while messages were still in process. Note that the grpcomm barrier doesn't actually resolve that problem, but Brian has pointed out that we are unlikely to ever see it violated. Again, you might want to spend a little time on an advanced barrier algorithm as the one in "basic" is very simplistic. Summarizing this change: ORTE no longer tracks process state nor has direct responsibility for synchronizing jobs. This is now done via collective operations within the MPI layer, albeit using ORTE collective communication services. I -strongly- urge the MPI team to implement advanced collective algorithms to improve the performance of this critical procedure. 2. reducing the volume of data exchanged during modex. Data in the modex consisted of the process name, the name of the node where that process is located (expressed as a string), plus a string representation of all contact info. The nodename was required in order for the modex to determine if the process was local or not - in addition, some people like to have it to print pretty error messages when a connection failed. The size of this data has been reduced in three ways: (a) reducing the size of the process name itself. The process name consisted of two 32-bit fields for the jobid and vpid. This is far larger than any current system, or system likely to exist in the near future, can support. Accordingly, the default size of these fields has been reduced to 16-bits, which means you can have 32k procs in each of 32k jobs. Since the daemons must have a vpid, and we require one daemon/node, this also restricts the default configuration to 32k nodes. To support any future "mega-clusters", a configuration option --enable-jumbo-apps has been added. This option increases the jobid and vpid field sizes to 32-bits. Someday, if necessary, someone can add yet another option to increase them to 64-bits, I suppose. (b) replacing the string nodename with an integer nodeid. Since we have one daemon/node, the nodeid corresponds to the local daemon's vpid. This replaces an often lengthy string with only 2 (or at most 4) bytes, a substantial reduction. (c) when the mca param requesting that nodenames be sent to support pretty error messages, a second mca param is now used to request FQDN - otherwise, the domain name is stripped (by default) from the message to save space. If someone wants to combine those into a single param somehow (perhaps with an argument?), they are welcome to do so - I didn't want to alter what people are already using. While these may seem like small savings, they actually amount to a significant impact when aggregated across the entire modex operation. Since every proc must receive the modex data regardless of the collective used to send it, just reducing the size of the process name removes nearly 400MBytes of communication from a 32k proc job (admittedly, much of this comm may occur in parallel). So it does add up pretty quickly. 3. routing RML messages to reduce connections. The default messaging system remains point-to-point - i.e., each proc opens a socket to every proc it communicates with and sends its messages directly. A new option uses the orteds as routers - i.e., each proc only opens a single socket to its local orted. All messages are sent from the proc to the orted, which forwards the message to the orted on the node where the intended recipient proc is located - that orted then forwards the message to its local proc (the recipient). This greatly reduces the connection storm we have encountered during startup. It also has the benefit of removing the sharing of every proc's OOB contact with every other proc. The orted routing tables are populated during launch since every orted gets a map of where every proc is being placed. Each proc, therefore, only needs to know the contact info for its local daemon, which is passed in via the environment when the proc is fork/exec'd by the daemon. This alone removes ~50 bytes/process of communication that was in the current STG1 startup message - so for our 32k proc job, this saves us roughly 32k*50 = 1.6MBytes sent to 32k procs = 51GBytes of messaging. Note that you can use the new routing method by specifying -mca routed tree - if you so desire. This mode will become the default at some point in the future. There are a few minor additional changes in the commit that I'll just note in passing: * propagation of command line mca params to the orteds - fixes ticket #1073. See note there for details. * requiring of "finalize" prior to "exit" for MPI procs - fixes ticket #1144. See note there for details. * cleanup of some stale header files This commit was SVN r16364.
2007-10-05 23:48:23 +04:00
/* pass that info to the singleton */
write(orted_globals.uri_pipe, tmp, strlen(tmp)+1); /* need to add 1 to get the NULL */
/* cleanup */
free(tmp);
If the orted HNP is spawned by a singleton, then it needs to harvest all the MCA params from its environment to ensure they are passed on to any subsequently spawned daemons. Otherwise, the singleton could be directed to select options that other apps miss. This commit was SVN r27221.
2012-09-04 05:10:26 +04:00
/* since a singleton spawned us, we need to harvest
* any MCA params from the local environment so
* we can pass them along to any subsequent daemons
* we may start as the result of a comm_spawn
*/
for (i=0; NULL != environ[i]; i++) {
configury: new OPAL_SET_MCA_PREFIX/ORTE_SET_MCA_CMD_LINE_ID macros These two macros set the MCA prefix and MCA cmd line id, respectively. Specifically, MCA parameters will be named PREFIX<foo> in the environment, and the cmd line will use -ID foo bar. These macros must be called during configure.ac and a value supplied. In the case of Open MPI, the values given are PREFIX=OMPI_MCA_ and ID=mca. Other projects (such as ORCM) will call these macros with their own unique values. For example, ORCM uses PREFIX=ORCM_MCA_ and ID=omca This scheme is necessary to allow running Open MPI applications under systems that use their own versions of ORTE and OPAL. For example, when running OMPI applications under ORCM, we need the MCA params passed to the ORCM daemons to be separated from those recognized by the OMPI application.
2014-10-23 00:56:37 +04:00
if (0 == strncmp(environ[i], OPAL_MCA_PREFIX, 9)) {
If the orted HNP is spawned by a singleton, then it needs to harvest all the MCA params from its environment to ensure they are passed on to any subsequently spawned daemons. Otherwise, the singleton could be directed to select options that other apps miss. This commit was SVN r27221.
2012-09-04 05:10:26 +04:00
/* make a copy to manipulate */
tmp = strdup(environ[i]);
/* find the equal sign */
nptr = strchr(tmp, '=');
*nptr = '\0';
nptr++;
/* add the mca param to the orted cmd line */
configury: new OPAL_SET_MCA_PREFIX/ORTE_SET_MCA_CMD_LINE_ID macros These two macros set the MCA prefix and MCA cmd line id, respectively. Specifically, MCA parameters will be named PREFIX<foo> in the environment, and the cmd line will use -ID foo bar. These macros must be called during configure.ac and a value supplied. In the case of Open MPI, the values given are PREFIX=OMPI_MCA_ and ID=mca. Other projects (such as ORCM) will call these macros with their own unique values. For example, ORCM uses PREFIX=ORCM_MCA_ and ID=omca This scheme is necessary to allow running Open MPI applications under systems that use their own versions of ORTE and OPAL. For example, when running OMPI applications under ORCM, we need the MCA params passed to the ORCM daemons to be separated from those recognized by the OMPI application.
2014-10-23 00:56:37 +04:00
opal_argv_append_nosize(&orted_cmd_line, "-"OPAL_MCA_CMD_LINE_ID);
If the orted HNP is spawned by a singleton, then it needs to harvest all the MCA params from its environment to ensure they are passed on to any subsequently spawned daemons. Otherwise, the singleton could be directed to select options that other apps miss. This commit was SVN r27221.
2012-09-04 05:10:26 +04:00
opal_argv_append_nosize(&orted_cmd_line, &tmp[9]);
opal_argv_append_nosize(&orted_cmd_line, nptr);
free(tmp);
}
}
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
}
/* if we were given a pipe to monitor for singleton termination, set that up */
if (orted_globals.singleton_died_pipe > 0) {
/* register shutdown handler */
Sorry for mid-day commit, but I had promised on the call to do this upon my return. Roll in the ORTE state machine. Remove last traces of opal_sos. Remove UTK epoch code. Please see the various emails about the state machine change for details. I'll send something out later with more info on the new arch. This commit was SVN r26242.
2012-04-06 18:23:13 +04:00
pipe_handler = (opal_event_t*)malloc(sizeof(opal_event_t));
opal_event_set(orte_event_base, pipe_handler,
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
orted_globals.singleton_died_pipe,
Sorry for mid-day commit, but I had promised on the call to do this upon my return. Roll in the ORTE state machine. Remove last traces of opal_sos. Remove UTK epoch code. Please see the various emails about the state machine change for details. I'll send something out later with more info on the new arch. This commit was SVN r26242.
2012-04-06 18:23:13 +04:00
OPAL_EV_READ,
pipe_closed,
Some minor cleanups. Get singletons working. Cleanup abort handling so it gets properly identified. This commit was SVN r26261.
2012-04-10 23:08:54 +04:00
pipe_handler);
Sorry for mid-day commit, but I had promised on the call to do this upon my return. Roll in the ORTE state machine. Remove last traces of opal_sos. Remove UTK epoch code. Please see the various emails about the state machine change for details. I'll send something out later with more info on the new arch. This commit was SVN r26242.
2012-04-06 18:23:13 +04:00
opal_event_add(pipe_handler, NULL);
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
}
As promised, rationalize the rsh support. Remove rshbase and the base rsh support, centralizing all rsh support into the rsh component. Remove the "slave" launch support as that experiment is complete. Fix tree spawn and make that the default method for rsh launch, turning it "off" for qrsh as that system does not support tree spawn. This commit was SVN r25507.
2011-11-26 06:33:05 +04:00
/* If I have a parent, then save his contact info so
* any messages we send can flow thru him.
*/
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-28 01:09:41 +04:00
orte_parent_uri = NULL;
(void) mca_base_var_register ("orte", "orte", NULL, "parent_uri",
"URI for the parent if tree launch is enabled.",
MCA_BASE_VAR_TYPE_STRING, NULL, 0,
MCA_BASE_VAR_FLAG_INTERNAL,
OPAL_INFO_LVL_9,
MCA_BASE_VAR_SCOPE_CONSTANT,
&orte_parent_uri);
if (NULL != orte_parent_uri) {
As promised, rationalize the rsh support. Remove rshbase and the base rsh support, centralizing all rsh support into the rsh component. Remove the "slave" launch support as that experiment is complete. Fix tree spawn and make that the default method for rsh launch, turning it "off" for qrsh as that system does not support tree spawn. This commit was SVN r25507.
2011-11-26 06:33:05 +04:00
orte_process_name_t parent;
/* set the contact info into the hash table */
As per the RFC, bring in the ORTE async progress code and the rewrite of OOB: *** THIS RFC INCLUDES A MINOR CHANGE TO THE MPI-RTE INTERFACE *** Note: during the course of this work, it was necessary to completely separate the MPI and RTE progress engines. There were multiple places in the MPI layer where ORTE_WAIT_FOR_COMPLETION was being used. A new OMPI_WAIT_FOR_COMPLETION macro was created (defined in ompi/mca/rte/rte.h) that simply cycles across opal_progress until the provided flag becomes false. Places where the MPI layer blocked waiting for RTE to complete an event have been modified to use this macro. *************************************************************************************** I am reissuing this RFC because of the time that has passed since its original release. Since its initial release and review, I have debugged it further to ensure it fully supports tests like loop_spawn. It therefore seems ready for merge back to the trunk. Given its prior review, I have set the timeout for one week. The code is in https://bitbucket.org/rhc/ompi-oob2 WHAT: Rewrite of ORTE OOB WHY: Support asynchronous progress and a host of other features WHEN: Wed, August 21 SYNOPSIS: The current OOB has served us well, but a number of limitations have been identified over the years. Specifically: * it is only progressed when called via opal_progress, which can lead to hangs or recursive calls into libevent (which is not supported by that code) * we've had issues when multiple NICs are available as the code doesn't "shift" messages between transports - thus, all nodes had to be available via the same TCP interface. * the OOB "unloads" incoming opal_buffer_t objects during the transmission, thus preventing use of OBJ_RETAIN in the code when repeatedly sending the same message to multiple recipients * there is no failover mechanism across NICs - if the selected NIC (or its attached switch) fails, we are forced to abort * only one transport (i.e., component) can be "active" The revised OOB resolves these problems: * async progress is used for all application processes, with the progress thread blocking in the event library * each available TCP NIC is supported by its own TCP module. The ability to asynchronously progress each module independently is provided, but not enabled by default (a runtime MCA parameter turns it "on") * multi-address TCP NICs (e.g., a NIC with both an IPv4 and IPv6 address, or with virtual interfaces) are supported - reachability is determined by comparing the contact info for a peer against all addresses within the range covered by the address/mask pairs for the NIC. * a message that arrives on one TCP NIC is automatically shifted to whatever NIC that is connected to the next "hop" if that peer cannot be reached by the incoming NIC. If no TCP module will reach the peer, then the OOB attempts to send the message via all other available components - if none can reach the peer, then an "error" is reported back to the RML, which then calls the errmgr for instructions. * opal_buffer_t now conforms to standard object rules re OBJ_RETAIN as we no longer "unload" the incoming object * NIC failure is reported to the TCP component, which then tries to resend the message across any other available TCP NIC. If that doesn't work, then the message is given back to the OOB base to try using other components. If all that fails, then the error is reported to the RML, which reports to the errmgr for instructions * obviously from the above, multiple OOB components (e.g., TCP and UD) can be active in parallel * the matching code has been moved to the RML (and out of the OOB/TCP component) so it is independent of transport * routing is done by the individual OOB modules (as opposed to the RML). Thus, both routed and non-routed transports can simultaneously be active * all blocking send/recv APIs have been removed. Everything operates asynchronously. KNOWN LIMITATIONS: * although provision is made for component failover as described above, the code for doing so has not been fully implemented yet. At the moment, if all connections for a given peer fail, the errmgr is notified of a "lost connection", which by default results in termination of the job if it was a lifeline * the IPv6 code is present and compiles, but is not complete. Since the current IPv6 support in the OOB doesn't work anyway, I don't consider this a blocker * routing is performed at the individual module level, yet the active routed component is selected on a global basis. We probably should update that to reflect that different transports may need/choose to route in different ways * obviously, not every error path has been tested nor necessarily covered * determining abnormal termination is more challenging than in the old code as we now potentially have multiple ways of connecting to a process. Ideally, we would declare "connection failed" when *all* transports can no longer reach the process, but that requires some additional (possibly complex) code. For now, the code replicates the old behavior only somewhat modified - i.e., if a module sees its connection fail, it checks to see if it is a lifeline. If so, it notifies the errmgr that the lifeline is lost - otherwise, it notifies the errmgr that a non-lifeline connection was lost. * reachability is determined solely on the basis of a shared subnet address/mask - more sophisticated algorithms (e.g., the one used in the tcp btl) are required to handle routing via gateways * the RML needs to assign sequence numbers to each message on a per-peer basis. The receiving RML will then deliver messages in order, thus preventing out-of-order messaging in the case where messages travel across different transports or a message needs to be redirected/resent due to failure of a NIC This commit was SVN r29058.
2013-08-22 20:37:40 +04:00
orte_rml.set_contact_info(orte_parent_uri);
ret = orte_rml_base_parse_uris(orte_parent_uri, &parent, NULL);
if (ORTE_SUCCESS != ret) {
As promised, rationalize the rsh support. Remove rshbase and the base rsh support, centralizing all rsh support into the rsh component. Remove the "slave" launch support as that experiment is complete. Fix tree spawn and make that the default method for rsh launch, turning it "off" for qrsh as that system does not support tree spawn. This commit was SVN r25507.
2011-11-26 06:33:05 +04:00
ORTE_ERROR_LOG(ret);
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-28 01:09:41 +04:00
free (orte_parent_uri);
orte_parent_uri = NULL;
As promised, rationalize the rsh support. Remove rshbase and the base rsh support, centralizing all rsh support into the rsh component. Remove the "slave" launch support as that experiment is complete. Fix tree spawn and make that the default method for rsh launch, turning it "off" for qrsh as that system does not support tree spawn. This commit was SVN r25507.
2011-11-26 06:33:05 +04:00
goto DONE;
}
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-28 01:09:41 +04:00
/* don't need this value anymore */
As per the RFC, bring in the ORTE async progress code and the rewrite of OOB: *** THIS RFC INCLUDES A MINOR CHANGE TO THE MPI-RTE INTERFACE *** Note: during the course of this work, it was necessary to completely separate the MPI and RTE progress engines. There were multiple places in the MPI layer where ORTE_WAIT_FOR_COMPLETION was being used. A new OMPI_WAIT_FOR_COMPLETION macro was created (defined in ompi/mca/rte/rte.h) that simply cycles across opal_progress until the provided flag becomes false. Places where the MPI layer blocked waiting for RTE to complete an event have been modified to use this macro. *************************************************************************************** I am reissuing this RFC because of the time that has passed since its original release. Since its initial release and review, I have debugged it further to ensure it fully supports tests like loop_spawn. It therefore seems ready for merge back to the trunk. Given its prior review, I have set the timeout for one week. The code is in https://bitbucket.org/rhc/ompi-oob2 WHAT: Rewrite of ORTE OOB WHY: Support asynchronous progress and a host of other features WHEN: Wed, August 21 SYNOPSIS: The current OOB has served us well, but a number of limitations have been identified over the years. Specifically: * it is only progressed when called via opal_progress, which can lead to hangs or recursive calls into libevent (which is not supported by that code) * we've had issues when multiple NICs are available as the code doesn't "shift" messages between transports - thus, all nodes had to be available via the same TCP interface. * the OOB "unloads" incoming opal_buffer_t objects during the transmission, thus preventing use of OBJ_RETAIN in the code when repeatedly sending the same message to multiple recipients * there is no failover mechanism across NICs - if the selected NIC (or its attached switch) fails, we are forced to abort * only one transport (i.e., component) can be "active" The revised OOB resolves these problems: * async progress is used for all application processes, with the progress thread blocking in the event library * each available TCP NIC is supported by its own TCP module. The ability to asynchronously progress each module independently is provided, but not enabled by default (a runtime MCA parameter turns it "on") * multi-address TCP NICs (e.g., a NIC with both an IPv4 and IPv6 address, or with virtual interfaces) are supported - reachability is determined by comparing the contact info for a peer against all addresses within the range covered by the address/mask pairs for the NIC. * a message that arrives on one TCP NIC is automatically shifted to whatever NIC that is connected to the next "hop" if that peer cannot be reached by the incoming NIC. If no TCP module will reach the peer, then the OOB attempts to send the message via all other available components - if none can reach the peer, then an "error" is reported back to the RML, which then calls the errmgr for instructions. * opal_buffer_t now conforms to standard object rules re OBJ_RETAIN as we no longer "unload" the incoming object * NIC failure is reported to the TCP component, which then tries to resend the message across any other available TCP NIC. If that doesn't work, then the message is given back to the OOB base to try using other components. If all that fails, then the error is reported to the RML, which reports to the errmgr for instructions * obviously from the above, multiple OOB components (e.g., TCP and UD) can be active in parallel * the matching code has been moved to the RML (and out of the OOB/TCP component) so it is independent of transport * routing is done by the individual OOB modules (as opposed to the RML). Thus, both routed and non-routed transports can simultaneously be active * all blocking send/recv APIs have been removed. Everything operates asynchronously. KNOWN LIMITATIONS: * although provision is made for component failover as described above, the code for doing so has not been fully implemented yet. At the moment, if all connections for a given peer fail, the errmgr is notified of a "lost connection", which by default results in termination of the job if it was a lifeline * the IPv6 code is present and compiles, but is not complete. Since the current IPv6 support in the OOB doesn't work anyway, I don't consider this a blocker * routing is performed at the individual module level, yet the active routed component is selected on a global basis. We probably should update that to reflect that different transports may need/choose to route in different ways * obviously, not every error path has been tested nor necessarily covered * determining abnormal termination is more challenging than in the old code as we now potentially have multiple ways of connecting to a process. Ideally, we would declare "connection failed" when *all* transports can no longer reach the process, but that requires some additional (possibly complex) code. For now, the code replicates the old behavior only somewhat modified - i.e., if a module sees its connection fail, it checks to see if it is a lifeline. If so, it notifies the errmgr that the lifeline is lost - otherwise, it notifies the errmgr that a non-lifeline connection was lost. * reachability is determined solely on the basis of a shared subnet address/mask - more sophisticated algorithms (e.g., the one used in the tcp btl) are required to handle routing via gateways * the RML needs to assign sequence numbers to each message on a per-peer basis. The receiving RML will then deliver messages in order, thus preventing out-of-order messaging in the case where messages travel across different transports or a message needs to be redirected/resent due to failure of a NIC This commit was SVN r29058.
2013-08-22 20:37:40 +04:00
free(orte_parent_uri);
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-28 01:09:41 +04:00
orte_parent_uri = NULL;
As promised, rationalize the rsh support. Remove rshbase and the base rsh support, centralizing all rsh support into the rsh component. Remove the "slave" launch support as that experiment is complete. Fix tree spawn and make that the default method for rsh launch, turning it "off" for qrsh as that system does not support tree spawn. This commit was SVN r25507.
2011-11-26 06:33:05 +04:00
/* tell the routed module that we have a path
* back to the HNP
*/
if (ORTE_SUCCESS != (ret = orte_routed.update_route(ORTE_PROC_MY_HNP, &parent))) {
ORTE_ERROR_LOG(ret);
goto DONE;
}
Set the lifeline when we are tree spawning under rsh so that the orted can self-terminate when its parent dies This commit was SVN r25655.
2011-12-15 19:29:53 +04:00
/* set the lifeline to point to our parent so that we
* can handle the situation if that lifeline goes away
*/
if (ORTE_SUCCESS != (ret = orte_routed.set_lifeline(&parent))) {
ORTE_ERROR_LOG(ret);
goto DONE;
}
As promised, rationalize the rsh support. Remove rshbase and the base rsh support, centralizing all rsh support into the rsh component. Remove the "slave" launch support as that experiment is complete. Fix tree spawn and make that the default method for rsh launch, turning it "off" for qrsh as that system does not support tree spawn. This commit was SVN r25507.
2011-11-26 06:33:05 +04:00
}
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
/* if we are not the HNP...the only time we will be an HNP
* is if we are launched by a singleton to provide support
* for it
*/
Fix some major bit-rot on scalable launch. If static ports are provided, then daemons can connect back to the HNP via the routed connection tree instead of doing so directly. In order to do that at scale, the node list must be passed as a regular expression - otherwise, the orted command line gets too long. Over the course of time, usage of static ports got corrupted in several places, the "parent" info got incorrectly reset, etc. So correct all that and get the regex-based wireup going again. Also, don't pass node lists if static ports aren't enabled - they are of no value to the orted and just create the possibility of overly-long cmd lines. This commit was SVN r24860.
2011-07-07 22:54:30 +04:00
if (!ORTE_PROC_IS_HNP) {
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
/* send the information to the orted report-back point - this function
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
* will process the data, but also counts the number of
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
* orteds that reported back so the launch procedure can continue.
* We need to do this at the last possible second as the HNP
* can turn right around and begin issuing orders to us
*/
Add a binomial tree-based launch to ssh, turned "on" only when the plm_rsh_tree_spawned mca param is set to a non-zero value. This probably isn't a very optimized capability, but it does execute a tree-based launch that may scale better than linear at high node counts. Add the daemon map capability to the ODLS to create and save a map of daemon vpid vs nodename from the launch message. Cleanup a few places in the base plm launch support where we didn't adequately protect rml recv's from potentially executing sends. This commit was SVN r18143.
2008-04-14 22:26:08 +04:00
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
buffer = OBJ_NEW(opal_buffer_t);
Improve launch performance on clusters that use dedicated nodes by instructing the orteds to use the same port as the HNP, thus allowing them to "rollup" their initial callback via the routed network. This substantially reduces the HNP bottleneck and the number of ports opened by the HNP. Restore enable-static-ports option by default - the Cray will have to disable it to get around their library issues, but that's just a warning problem as opposed to blocking the build. This commit was SVN r26606.
2012-06-15 14:15:07 +04:00
/* insert our name for rollup purposes */
if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, ORTE_PROC_MY_NAME, 1, ORTE_NAME))) {
ORTE_ERROR_LOG(ret);
OBJ_RELEASE(buffer);
goto DONE;
}
Initial implementation of static ports. Provide an mca param to specify static port ranges to the OOB - can provide an y combination of comma-separated values and ranges. Daemons will use the first port in the range, MPI procs will use the other ports in the range assuming that they know their node rank in time and enough ports were specified. NOTE: this capability only works under specific conditions. I will outline more about this in a note to devel as the remainder of the implementation progresses. For now, the only environment where this works is slurm. The linear routed module has also been adjusted to work with static ports so that all messaging flows strictly through the topology, including the initial daemon callback - thus limiting the number of sockets opened by mpirun. This commit was SVN r20390.
2009-01-30 21:31:43 +03:00
/* for now, always include our contact info, even if we are using
* static ports. Eventually, this will be removed
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
*/
Initial implementation of static ports. Provide an mca param to specify static port ranges to the OOB - can provide an y combination of comma-separated values and ranges. Daemons will use the first port in the range, MPI procs will use the other ports in the range assuming that they know their node rank in time and enough ports were specified. NOTE: this capability only works under specific conditions. I will outline more about this in a note to devel as the remainder of the implementation progresses. For now, the only environment where this works is slurm. The linear routed module has also been adjusted to work with static ports so that all messaging flows strictly through the topology, including the initial daemon callback - thus limiting the number of sockets opened by mpirun. This commit was SVN r20390.
2009-01-30 21:31:43 +03:00
rml_uri = orte_rml.get_contact_info();
if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, &rml_uri, 1, OPAL_STRING))) {
ORTE_ERROR_LOG(ret);
OBJ_RELEASE(buffer);
Ensure that signals are de-trapped before exiting to stop the $#@@#$ event library from "asserting" This commit was SVN r20630.
2009-02-25 06:10:21 +03:00
goto DONE;
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
}
Repair the tree spawn. The problem seems to come from the fact that now the HNP send the messages using the routed component. In the case of tree spawn, when a intermediary node spawn a child it doesn't know how to forward a message to it, so when the node-map message is coming from the HNP (as there is nothing yet in the contact/routing table) the message is sent back the way it came. As a result the node-map message keeps jumping between the HNP and the first level orteds. The solution is to add a new option to the children orte_parent_uri, which is only set when the orted is _not_ directly spawned by the HNP. When this option is present on the argument list, the orted will add the parent to its routing, and force the parent to update his routes (by sending the URI). With this approach, the routing tree is build in same time as the processes are spawned, and all messages from the HNP can be routed to the leaves. However, this is far from an optimal solution. Right now, this so called tree spawn, only spawn the children in a tree without doing anything about the "connect back to the HNP" step. The HNP is flooded with reports from all the orted. The total number of messages is higher than in the non tree startup scheme, so we do not expect this approach to be scalable in the current incarnation. A complete overhaul of the tree startup is required in order improve the scalability. Stay tuned! This commit was SVN r21504.
2009-06-24 02:10:25 +04:00
As promised, rationalize the rsh support. Remove rshbase and the base rsh support, centralizing all rsh support into the rsh component. Remove the "slave" launch support as that experiment is complete. Fix tree spawn and make that the default method for rsh launch, turning it "off" for qrsh as that system does not support tree spawn. This commit was SVN r25507.
2011-11-26 06:33:05 +04:00
/* include our node name */
opal_dss.pack(buffer, &orte_process_info.nodename, 1, OPAL_STRING);
In order to properly connect to debuggers like STAT, we need to get the hostname in its unstripped version for the MPIR_proctab. Unfortunately, we need a stripped version for Cray's alps launcher. So when we are stripping the hostname prefix, retain alias hostnames and add the ability to specify an alias to use in the proctab. This commit was SVN r27863.
2013-01-18 09:00:05 +04:00
Add an MCA param to retain all aliases based on IP addrs for node names so that procs can look them up by interface, if desired. If the param is set, pass aliases around to all daemons and procs for local use This commit was SVN r27619.
2012-11-16 08:04:29 +04:00
/* if requested, include any non-loopback aliases for this node */
if (orte_retain_aliases) {
char **aliases=NULL;
uint8_t naliases, ni;
orte: fixup hostname max length usage Also removes orte specific max hostname value. Signed-off-by: Karol Mroz <mroz.karol@gmail.com>
2016-04-16 03:47:42 +03:00
char hostname[OPAL_MAXHOSTNAMELEN];
Refs trac:3710 Simplify the whole stripping of prefix method by consolidating it into a single MCA param. Allow for multiple prefixes to be stripped, each separated in the param by a comma. If no prefix is given, or the specified prefix isn't in the nodename, then just use the hostname itself. This commit was SVN r28974. The following Trac tickets were found above: Ticket 3710 --> https://svn.open-mpi.org/trac/ompi/ticket/3710
2013-08-01 04:32:10 +04:00
/* if we stripped the prefix or removed the fqdn,
* include full hostname as an alias
*/
orte: fixup hostname max length usage Also removes orte specific max hostname value. Signed-off-by: Karol Mroz <mroz.karol@gmail.com>
2016-04-16 03:47:42 +03:00
gethostname(hostname, sizeof(hostname));
Refs trac:3710 Simplify the whole stripping of prefix method by consolidating it into a single MCA param. Allow for multiple prefixes to be stripped, each separated in the param by a comma. If no prefix is given, or the specified prefix isn't in the nodename, then just use the hostname itself. This commit was SVN r28974. The following Trac tickets were found above: Ticket 3710 --> https://svn.open-mpi.org/trac/ompi/ticket/3710
2013-08-01 04:32:10 +04:00
if (strlen(orte_process_info.nodename) < strlen(hostname)) {
In order to properly connect to debuggers like STAT, we need to get the hostname in its unstripped version for the MPIR_proctab. Unfortunately, we need a stripped version for Cray's alps launcher. So when we are stripping the hostname prefix, retain alias hostnames and add the ability to specify an alias to use in the proctab. This commit was SVN r27863.
2013-01-18 09:00:05 +04:00
opal_argv_append_nosize(&aliases, hostname);
}
Add an MCA param to retain all aliases based on IP addrs for node names so that procs can look them up by interface, if desired. If the param is set, pass aliases around to all daemons and procs for local use This commit was SVN r27619.
2012-11-16 08:04:29 +04:00
opal_ifgetaliases(&aliases);
naliases = opal_argv_count(aliases);
if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, &naliases, 1, OPAL_UINT8))) {
ORTE_ERROR_LOG(ret);
OBJ_RELEASE(buffer);
orte/orted: fix misc memory leak as reported by Coverity with CID 743448
2015-06-03 07:58:07 +03:00
opal_argv_free(aliases);
Add an MCA param to retain all aliases based on IP addrs for node names so that procs can look them up by interface, if desired. If the param is set, pass aliases around to all daemons and procs for local use This commit was SVN r27619.
2012-11-16 08:04:29 +04:00
goto DONE;
}
for (ni=0; ni < naliases; ni++) {
if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, &aliases[ni], 1, OPAL_STRING))) {
ORTE_ERROR_LOG(ret);
OBJ_RELEASE(buffer);
orte/orted: fix misc memory leak as reported by Coverity with CID 743448
2015-06-03 07:58:07 +03:00
opal_argv_free(aliases);
Add an MCA param to retain all aliases based on IP addrs for node names so that procs can look them up by interface, if desired. If the param is set, pass aliases around to all daemons and procs for local use This commit was SVN r27619.
2012-11-16 08:04:29 +04:00
goto DONE;
}
}
opal_argv_free(aliases);
}
Remove OPAL_HAVE_HWLOC qualifier and error out if --without-hwloc is given
2015-09-05 02:54:40 +03:00
/* add the local topology, if different from the HNP's or user directed us to,
* but always if we are the first daemon to ensure we get a compute node */
if (1 == ORTE_PROC_MY_NAME->vpid || orte_hetero_nodes ||
0 != strcmp(orte_topo_signature, orted_globals.hnp_topo_sig)) {
tflag = 1;
if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, &tflag, 1, OPAL_UINT8))) {
ORTE_ERROR_LOG(ret);
**************************************************************** This change contains a non-mandatory modification of the MPI-RTE interface. Anyone wishing to support coprocessors such as the Xeon Phi may wish to add the required definition and underlying support **************************************************************** Add locality support for coprocessors such as the Intel Xeon Phi. Detecting that we are on a coprocessor inside of a host node isn't straightforward. There are no good "hooks" provided for programmatically detecting that "we are on a coprocessor running its own OS", and the ORTE daemon just thinks it is on another node. However, in order to properly use the Phi's public interface for MPI transport, it is necessary that the daemon detect that it is colocated with procs on the host. So we have to split the locality to separately record "on the same host" vs "on the same board". We already have the board-level locality flag, but not quite enough flexibility to handle this use-case. Thus, do the following: 1. add OPAL_PROC_ON_HOST flag to indicate we share a host, but not necessarily the same board 2. modify OPAL_PROC_ON_NODE to indicate we share both a host AND the same board. Note that we have to modify the OPAL_PROC_ON_LOCAL_NODE macro to explicitly check both conditions 3. add support in opal/mca/hwloc/base/hwloc_base_util.c for the host to check for coprocessors, and for daemons to check to see if they are on a coprocessor. The former is done via hwloc, but support for the latter is not yet provided by hwloc. So the code for detecting we are on a coprocessor currently is Xeon Phi specific - hopefully, we will find more generic methods in the future. 4. modify the orted and the hnp startup so they check for coprocessors and to see if they are on a coprocessor, and have the orteds pass that info back in their callback message. Automatically detect that coprocessors have been found and identify which coprocessors are on which hosts. Note that this algo isn't scalable at the moment - this will hopefully be improved over time. 5. modify the ompi proc locality detection function to look for coprocessor host info IF the OMPI_RTE_HOST_ID database key has been defined. RTE's that choose not to provide this support do not have to do anything - the associated code will simply be ignored. 6. include some cleanup of the hwloc open/close code so it conforms to how we did things in other frameworks (e.g., having a single "frame" file instead of open/close). Also, fix the locality flags - e.g., being on the same node means you must also be on the same cluster/cu, so ensure those flags are also set. cmr:v1.7.4:reviewer=hjelmn This commit was SVN r29435.
2013-10-14 20:52:58 +04:00
}
Remove OPAL_HAVE_HWLOC qualifier and error out if --without-hwloc is given
2015-09-05 02:54:40 +03:00
if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, &orte_topo_signature, 1, OPAL_STRING))) {
**************************************************************** This change contains a non-mandatory modification of the MPI-RTE interface. Anyone wishing to support coprocessors such as the Xeon Phi may wish to add the required definition and underlying support **************************************************************** Add locality support for coprocessors such as the Intel Xeon Phi. Detecting that we are on a coprocessor inside of a host node isn't straightforward. There are no good "hooks" provided for programmatically detecting that "we are on a coprocessor running its own OS", and the ORTE daemon just thinks it is on another node. However, in order to properly use the Phi's public interface for MPI transport, it is necessary that the daemon detect that it is colocated with procs on the host. So we have to split the locality to separately record "on the same host" vs "on the same board". We already have the board-level locality flag, but not quite enough flexibility to handle this use-case. Thus, do the following: 1. add OPAL_PROC_ON_HOST flag to indicate we share a host, but not necessarily the same board 2. modify OPAL_PROC_ON_NODE to indicate we share both a host AND the same board. Note that we have to modify the OPAL_PROC_ON_LOCAL_NODE macro to explicitly check both conditions 3. add support in opal/mca/hwloc/base/hwloc_base_util.c for the host to check for coprocessors, and for daemons to check to see if they are on a coprocessor. The former is done via hwloc, but support for the latter is not yet provided by hwloc. So the code for detecting we are on a coprocessor currently is Xeon Phi specific - hopefully, we will find more generic methods in the future. 4. modify the orted and the hnp startup so they check for coprocessors and to see if they are on a coprocessor, and have the orteds pass that info back in their callback message. Automatically detect that coprocessors have been found and identify which coprocessors are on which hosts. Note that this algo isn't scalable at the moment - this will hopefully be improved over time. 5. modify the ompi proc locality detection function to look for coprocessor host info IF the OMPI_RTE_HOST_ID database key has been defined. RTE's that choose not to provide this support do not have to do anything - the associated code will simply be ignored. 6. include some cleanup of the hwloc open/close code so it conforms to how we did things in other frameworks (e.g., having a single "frame" file instead of open/close). Also, fix the locality flags - e.g., being on the same node means you must also be on the same cluster/cu, so ensure those flags are also set. cmr:v1.7.4:reviewer=hjelmn This commit was SVN r29435.
2013-10-14 20:52:58 +04:00
ORTE_ERROR_LOG(ret);
}
Remove OPAL_HAVE_HWLOC qualifier and error out if --without-hwloc is given
2015-09-05 02:54:40 +03:00
if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, &opal_hwloc_topology, 1, OPAL_HWLOC_TOPO))) {
As promised, rationalize the rsh support. Remove rshbase and the base rsh support, centralizing all rsh support into the rsh component. Remove the "slave" launch support as that experiment is complete. Fix tree spawn and make that the default method for rsh launch, turning it "off" for qrsh as that system does not support tree spawn. This commit was SVN r25507.
2011-11-26 06:33:05 +04:00
ORTE_ERROR_LOG(ret);
Add a new framework for discovering local resource information such as cpu type/model, #cpus, available physical memory, etc. Two initial components (darwin and linux) are provided. This is needed to support bootstrap operations where daemons are started at node boot, and applications where initial knowledge of cpu identification is needed to guide framework component selection. Add orte configuration option to control the use of the framework in the system. Although the code will build, it will not be active unless configured with --enable-bootstrap. If bootstrap is enabled and the new opal_sysinfo framework can successfully determine the cpu model, pass that info to the application as an MCA param to support some work at Sun. Also, have daemons report back the resources they find to guide process mapping in bootstrap operations (i.e., where the daemon starts at node boot as opposed to being launched at application start). Adjust some platform files to enable these capabilities. This commit was SVN r22244.
2009-12-01 02:11:25 +03:00
}
Remove OPAL_HAVE_HWLOC qualifier and error out if --without-hwloc is given
2015-09-05 02:54:40 +03:00
} else {
tflag = 0;
if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, &tflag, 1, OPAL_UINT8))) {
ORTE_ERROR_LOG(ret);
Revise the way we handle hetero nodes as users are finding this (a) a significant surprise, and (b) confusing as to when it is required. So try to automate it a bit by creating a topology "signature" that mpirun can share on the cmd line with the remote daemons, thus allowing them to check to see if they match. This isn't comprehensive of course - for now, it only checks the number of each type of hwloc object on the node. This is good enough to pickup major differences (e.g., where we have different numbers of sockets or assigned core bindings). Retain the hetero-nodes flag for those cases where the user *knows* that there are differences and our automated system isn't good enough to see it. Will obviously require further refinement as we find out which variances it can detect, and which it cannot.
2014-12-09 02:33:45 +03:00
}
As promised, rationalize the rsh support. Remove rshbase and the base rsh support, centralizing all rsh support into the rsh component. Remove the "slave" launch support as that experiment is complete. Fix tree spawn and make that the default method for rsh launch, turning it "off" for qrsh as that system does not support tree spawn. This commit was SVN r25507.
2011-11-26 06:33:05 +04:00
}
Remove OPAL_HAVE_HWLOC qualifier and error out if --without-hwloc is given
2015-09-05 02:54:40 +03:00
/* detect and add any coprocessors */
coprocessors = opal_hwloc_base_find_coprocessors(opal_hwloc_topology);
if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, &coprocessors, 1, OPAL_STRING))) {
ORTE_ERROR_LOG(ret);
}
/* see if I am on a coprocessor */
coprocessors = opal_hwloc_base_check_on_coprocessor();
if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, &coprocessors, 1, OPAL_STRING))) {
ORTE_ERROR_LOG(ret);
}
if (NULL!= coprocessors) {
free(coprocessors);
}
Per the RFC from Jeff, move hwloc from opal/mca/common to its own static framework ala libevent. Have ORTE daemons collect the topology info at startup and, if --enable-hwloc-xml is set, send that info back to the HNP for later use. The HNP only retains unique topology "templates" to reduce memory footprint. Have the daemon include the local topology info in the nidmap buffer sent to each app so the apps don't all hammer the local system to discover it for themselves. Remove the sysinfo framework as hwloc replaces that functionality. This commit was SVN r25124.
2011-09-11 23:02:24 +04:00
Daemonize prior to starting any progress threads This commit was SVN r28303.
2013-04-08 04:42:57 +04:00
/* send to the HNP's callback - will be routed if routes are available */
if (0 > (ret = orte_rml.send_buffer_nb(ORTE_PROC_MY_HNP, buffer,
As per the RFC, bring in the ORTE async progress code and the rewrite of OOB: *** THIS RFC INCLUDES A MINOR CHANGE TO THE MPI-RTE INTERFACE *** Note: during the course of this work, it was necessary to completely separate the MPI and RTE progress engines. There were multiple places in the MPI layer where ORTE_WAIT_FOR_COMPLETION was being used. A new OMPI_WAIT_FOR_COMPLETION macro was created (defined in ompi/mca/rte/rte.h) that simply cycles across opal_progress until the provided flag becomes false. Places where the MPI layer blocked waiting for RTE to complete an event have been modified to use this macro. *************************************************************************************** I am reissuing this RFC because of the time that has passed since its original release. Since its initial release and review, I have debugged it further to ensure it fully supports tests like loop_spawn. It therefore seems ready for merge back to the trunk. Given its prior review, I have set the timeout for one week. The code is in https://bitbucket.org/rhc/ompi-oob2 WHAT: Rewrite of ORTE OOB WHY: Support asynchronous progress and a host of other features WHEN: Wed, August 21 SYNOPSIS: The current OOB has served us well, but a number of limitations have been identified over the years. Specifically: * it is only progressed when called via opal_progress, which can lead to hangs or recursive calls into libevent (which is not supported by that code) * we've had issues when multiple NICs are available as the code doesn't "shift" messages between transports - thus, all nodes had to be available via the same TCP interface. * the OOB "unloads" incoming opal_buffer_t objects during the transmission, thus preventing use of OBJ_RETAIN in the code when repeatedly sending the same message to multiple recipients * there is no failover mechanism across NICs - if the selected NIC (or its attached switch) fails, we are forced to abort * only one transport (i.e., component) can be "active" The revised OOB resolves these problems: * async progress is used for all application processes, with the progress thread blocking in the event library * each available TCP NIC is supported by its own TCP module. The ability to asynchronously progress each module independently is provided, but not enabled by default (a runtime MCA parameter turns it "on") * multi-address TCP NICs (e.g., a NIC with both an IPv4 and IPv6 address, or with virtual interfaces) are supported - reachability is determined by comparing the contact info for a peer against all addresses within the range covered by the address/mask pairs for the NIC. * a message that arrives on one TCP NIC is automatically shifted to whatever NIC that is connected to the next "hop" if that peer cannot be reached by the incoming NIC. If no TCP module will reach the peer, then the OOB attempts to send the message via all other available components - if none can reach the peer, then an "error" is reported back to the RML, which then calls the errmgr for instructions. * opal_buffer_t now conforms to standard object rules re OBJ_RETAIN as we no longer "unload" the incoming object * NIC failure is reported to the TCP component, which then tries to resend the message across any other available TCP NIC. If that doesn't work, then the message is given back to the OOB base to try using other components. If all that fails, then the error is reported to the RML, which reports to the errmgr for instructions * obviously from the above, multiple OOB components (e.g., TCP and UD) can be active in parallel * the matching code has been moved to the RML (and out of the OOB/TCP component) so it is independent of transport * routing is done by the individual OOB modules (as opposed to the RML). Thus, both routed and non-routed transports can simultaneously be active * all blocking send/recv APIs have been removed. Everything operates asynchronously. KNOWN LIMITATIONS: * although provision is made for component failover as described above, the code for doing so has not been fully implemented yet. At the moment, if all connections for a given peer fail, the errmgr is notified of a "lost connection", which by default results in termination of the job if it was a lifeline * the IPv6 code is present and compiles, but is not complete. Since the current IPv6 support in the OOB doesn't work anyway, I don't consider this a blocker * routing is performed at the individual module level, yet the active routed component is selected on a global basis. We probably should update that to reflect that different transports may need/choose to route in different ways * obviously, not every error path has been tested nor necessarily covered * determining abnormal termination is more challenging than in the old code as we now potentially have multiple ways of connecting to a process. Ideally, we would declare "connection failed" when *all* transports can no longer reach the process, but that requires some additional (possibly complex) code. For now, the code replicates the old behavior only somewhat modified - i.e., if a module sees its connection fail, it checks to see if it is a lifeline. If so, it notifies the errmgr that the lifeline is lost - otherwise, it notifies the errmgr that a non-lifeline connection was lost. * reachability is determined solely on the basis of a shared subnet address/mask - more sophisticated algorithms (e.g., the one used in the tcp btl) are required to handle routing via gateways * the RML needs to assign sequence numbers to each message on a per-peer basis. The receiving RML will then deliver messages in order, thus preventing out-of-order messaging in the case where messages travel across different transports or a message needs to be redirected/resent due to failure of a NIC This commit was SVN r29058.
2013-08-22 20:37:40 +04:00
ORTE_RML_TAG_ORTED_CALLBACK,
Daemonize prior to starting any progress threads This commit was SVN r28303.
2013-04-08 04:42:57 +04:00
orte_rml_send_callback, NULL))) {
ORTE_ERROR_LOG(ret);
OBJ_RELEASE(buffer);
goto DONE;
Improve launch performance on clusters that use dedicated nodes by instructing the orteds to use the same port as the HNP, thus allowing them to "rollup" their initial callback via the routed network. This substantially reduces the HNP bottleneck and the number of ports opened by the HNP. Restore enable-static-ports option by default - the Cray will have to disable it to get around their library issues, but that's just a warning problem as opposed to blocking the build. This commit was SVN r26606.
2012-06-15 14:15:07 +04:00
}
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
}
Ensure we pass along user-specified mca params from the cmd line when doing a tree spawn, but don't extend the cmd line with duplicates or things that shouldn't be there This commit was SVN r27117.
2012-08-23 01:41:50 +04:00
/* if we are tree-spawning, then we need to capture the MCA params
* from our cmd line so we can pass them along to the daemons we spawn -
* otherwise, only the first layer of daemons will ever see them
*/
if (orted_globals.tree_spawn) {
int j, k;
bool ignore;
char *no_keep[] = {
"orte_hnp_uri",
"orte_ess_jobid",
"orte_ess_vpid",
"orte_ess_num_procs",
"orte_parent_uri",
Fix incorrect implementation of new MCA param mca_base_env_list - it was not picking up envars and forwarding them, but only worked if you explicitly set a value for the envar. Ensure it works for both direct and indirect launch modes. Remove stale code as this replaced orte_forward_envars. Ensure it doesn't get passed to the ORTE daemons.
2014-10-16 23:58:56 +04:00
"mca_base_env_list",
Ensure we pass along user-specified mca params from the cmd line when doing a tree spawn, but don't extend the cmd line with duplicates or things that shouldn't be there This commit was SVN r27117.
2012-08-23 01:41:50 +04:00
NULL
};
for (i=0; i < argc; i++) {
configury: new OPAL_SET_MCA_PREFIX/ORTE_SET_MCA_CMD_LINE_ID macros These two macros set the MCA prefix and MCA cmd line id, respectively. Specifically, MCA parameters will be named PREFIX<foo> in the environment, and the cmd line will use -ID foo bar. These macros must be called during configure.ac and a value supplied. In the case of Open MPI, the values given are PREFIX=OMPI_MCA_ and ID=mca. Other projects (such as ORCM) will call these macros with their own unique values. For example, ORCM uses PREFIX=ORCM_MCA_ and ID=omca This scheme is necessary to allow running Open MPI applications under systems that use their own versions of ORTE and OPAL. For example, when running OMPI applications under ORCM, we need the MCA params passed to the ORCM daemons to be separated from those recognized by the OMPI application.
2014-10-23 00:56:37 +04:00
if (0 == strcmp("-"OPAL_MCA_CMD_LINE_ID, argv[i]) ||
0 == strcmp("--"OPAL_MCA_CMD_LINE_ID, argv[i]) ) {
Ensure we pass along user-specified mca params from the cmd line when doing a tree spawn, but don't extend the cmd line with duplicates or things that shouldn't be there This commit was SVN r27117.
2012-08-23 01:41:50 +04:00
ignore = false;
/* see if this is something we cannot pass along */
for (k=0; NULL != no_keep[k]; k++) {
if (0 == strcmp(no_keep[k], argv[i+1])) {
ignore = true;
break;
}
}
if (!ignore) {
/* see if this is already present so we at least can
* avoid growing the cmd line with duplicates
*/
if (NULL != orted_cmd_line) {
for (j=0; NULL != orted_cmd_line[j]; j++) {
if (0 == strcmp(argv[i+1], orted_cmd_line[j])) {
/* already here - ignore it */
ignore = true;
break;
}
}
}
if (!ignore) {
opal_argv_append_nosize(&orted_cmd_line, argv[i]);
opal_argv_append_nosize(&orted_cmd_line, argv[i+1]);
opal_argv_append_nosize(&orted_cmd_line, argv[i+2]);
}
}
i += 2;
}
}
}
Purge whitespace from the repo
2015-06-24 06:59:57 +03:00
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
if (orte_debug_daemons_flag) {
- Revert r20740 This commit was SVN r20741. The following SVN revision numbers were found above: r20740 --> open-mpi/ompi@2a70618a77d69c02354fa493c4e3235cfa45956f
2009-03-06 00:50:47 +03:00
opal_output(0, "%s orted: up and running - waiting for commands!", ORTE_NAME_PRINT(ORTE_PROC_MY_NAME));
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
}
Okay, since a certain other RM out there made a fuss about being able to lock their daemons to specified cores, offer the same option here. The MCA param orte_daemon_cores can be used to specify which core(s) you want the orte daemons to use. This will have no bearing on the application procs - unbound will remain unbound, and binding directives will be applied to the apps. Yippee skippee... This commit was SVN r30513.
2014-01-31 03:50:14 +04:00
ret = ORTE_SUCCESS;
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
Sorry for mid-day commit, but I had promised on the call to do this upon my return. Roll in the ORTE state machine. Remove last traces of opal_sos. Remove UTK epoch code. Please see the various emails about the state machine change for details. I'll send something out later with more info on the new arch. This commit was SVN r26242.
2012-04-06 18:23:13 +04:00
/* loop the event lib until an exit event is detected */
Ouch - opal_progress calls event_loop with a NO_BLOCK flag. So when run without progress threads, the ORTE tools were not blocking in the event lib as they should be. Avoid calling opal_progress inside ORTE by directly using the event_loop call instead of ORTE_WAIT_FOR_COMPLETION as parts of the OMPI layer are using that macro. Thanks to George for spotting the problem. This commit was SVN r27815.
2013-01-15 03:06:42 +04:00
while (orte_event_base_active) {
opal_event_loop(orte_event_base, OPAL_EVLOOP_ONCE);
}
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
Ensure we always cleanup local procs, no matter how we exited. This commit was SVN r26454.
2012-05-19 03:37:40 +04:00
/* ensure all local procs are dead */
orte_odls.kill_local_procs(NULL);
Fix some major bit-rot on scalable launch. If static ports are provided, then daemons can connect back to the HNP via the routed connection tree instead of doing so directly. In order to do that at scale, the node list must be passed as a regular expression - otherwise, the orted command line gets too long. Over the course of time, usage of static ports got corrupted in several places, the "parent" info got incorrectly reset, etc. So correct all that and get the regex-based wireup going again. Also, don't pass node lists if static ports aren't enabled - they are of no value to the orted and just create the possibility of overly-long cmd lines. This commit was SVN r24860.
2011-07-07 22:54:30 +04:00
DONE:
Sorry for mid-day commit, but I had promised on the call to do this upon my return. Roll in the ORTE state machine. Remove last traces of opal_sos. Remove UTK epoch code. Please see the various emails about the state machine change for details. I'll send something out later with more info on the new arch. This commit was SVN r26242.
2012-04-06 18:23:13 +04:00
/* update the exit status, in case it wasn't done */
Okay, since a certain other RM out there made a fuss about being able to lock their daemons to specified cores, offer the same option here. The MCA param orte_daemon_cores can be used to specify which core(s) you want the orte daemons to use. This will have no bearing on the application procs - unbound will remain unbound, and binding directives will be applied to the apps. Yippee skippee... This commit was SVN r30513.
2014-01-31 03:50:14 +04:00
ORTE_UPDATE_EXIT_STATUS(ret);
Sorry for mid-day commit, but I had promised on the call to do this upon my return. Roll in the ORTE state machine. Remove last traces of opal_sos. Remove UTK epoch code. Please see the various emails about the state machine change for details. I'll send something out later with more info on the new arch. This commit was SVN r26242.
2012-04-06 18:23:13 +04:00
/* cleanup and leave */
orte_finalize();
if (orte_debug_flag) {
fprintf(stderr, "exiting with status %d\n", orte_exit_status);
}
exit(orte_exit_status);
}
static void pipe_closed(int fd, short flags, void *arg)
{
opal_event_t *ev = (opal_event_t*)arg;
/* no error here - we just want to terminate */
opal_event_free(ev);
ORTE_ACTIVATE_JOB_STATE(NULL, ORTE_JOB_STATE_DAEMONS_TERMINATED);
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
}
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
static void shutdown_callback(int fd, short flags, void *arg)
{
Sorry for mid-day commit, but I had promised on the call to do this upon my return. Roll in the ORTE state machine. Remove last traces of opal_sos. Remove UTK epoch code. Please see the various emails about the state machine change for details. I'll send something out later with more info on the new arch. This commit was SVN r26242.
2012-04-06 18:23:13 +04:00
orte_timer_t *tm = (orte_timer_t*)arg;
if (NULL != tm) {
/* release the timer */
OBJ_RELEASE(tm);
Bring in an updated launch system for the orteds. This commit restores the ability to execute singletons and singleton comm_spawn, both in single node and multi-node environments. Short description: major changes include - 1. singletons now fork/exec a local daemon to manage their operations. 2. the orte daemon code now resides in libopen-rte 3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided. I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine. This commit was SVN r15390.
2007-07-12 23:53:18 +04:00
}
Purge whitespace from the repo
2015-06-24 06:59:57 +03:00
Some minor updates to the locking system changes. Remove obsolete locks. Ensure the trigger event objects do not get deconstructed until the very end to avoid possible problems due to race conditions. Route all orted abnormal term tests through the trigger. This commit was SVN r19172.
2008-08-06 15:31:06 +04:00
/* if we were ordered to abort, do so */
if (orted_globals.abort) {
Fix registration of error handlers thru the pmix120 component. A thread-shift operation was hanging on the sync_event_base, which made it dependent on someone calling opal_progress. Unfortunately, a process in "sleep" or spinning outside the MPI library won't do that, and so we never complete errhandler registration.
2016-03-03 01:30:57 +03:00
opal_output(0, "%s is executing %s abort", ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
(orted_globals.test_suicide) ? "suicide" : "clean");
Some minor updates to the locking system changes. Remove obsolete locks. Ensure the trigger event objects do not get deconstructed until the very end to avoid possible problems due to race conditions. Route all orted abnormal term tests through the trigger. This commit was SVN r19172.
2008-08-06 15:31:06 +04:00
/* do -not- call finalize as this will send a message to the HNP
Start reducing our dependency on the event library by removing at least one instance where we use it to redirect the program counter. Rolf reported occasional hangs of mpirun in very specific circumstances after all daemons were done. A review of MTT results indicates this may have been happening more generally in a small fraction of cases. The problem was tracked to use of the grpcomm.onesided_barrier to control daemon/mpirun termination. This relied on messaging -and- required that the program counter jump from the errmgr back to grpcomm. On rare occasions, this jump did not occur, causing mpirun to hang. This patch looks more invasive than it is - most of the affected files simply had one or two lines removed. The essence of the change is: * pulled the job_complete and quit routines out of orterun and orted_main and put them in a common place * modified the errmgr to directly call the new routines when termination is detected * removed the grpcomm.onesided_barrier and its associated RML tag * add a new "num_routes" API to the routed framework that reports back the number of dependent routes. When route_lost is called, the daemon's list of "children" is checked and adjusted if that route went to a "leaf" in the routing tree * use connection termination between daemons to track rollup of the daemon tree. Daemons and HNP now terminate once num_routes returns zero Also picked up in this commit is the addition of a new bool flag to the app_context struct, and increasing the job_control field from 8 to 16 bits. Both trivial. This commit was SVN r23429.
2010-07-18 01:03:27 +04:00
* indicating clean termination! Instead, just kill our
* local procs, forcibly cleanup the local session_dir tree, and abort
Some minor updates to the locking system changes. Remove obsolete locks. Ensure the trigger event objects do not get deconstructed until the very end to avoid possible problems due to race conditions. Route all orted abnormal term tests through the trigger. This commit was SVN r19172.
2008-08-06 15:31:06 +04:00
*/
Fix registration of error handlers thru the pmix120 component. A thread-shift operation was hanging on the sync_event_base, which made it dependent on someone calling opal_progress. Unfortunately, a process in "sleep" or spinning outside the MPI library won't do that, and so we never complete errhandler registration.
2016-03-03 01:30:57 +03:00
if (orted_globals.test_suicide) {
exit(1);
}
Start reducing our dependency on the event library by removing at least one instance where we use it to redirect the program counter. Rolf reported occasional hangs of mpirun in very specific circumstances after all daemons were done. A review of MTT results indicates this may have been happening more generally in a small fraction of cases. The problem was tracked to use of the grpcomm.onesided_barrier to control daemon/mpirun termination. This relied on messaging -and- required that the program counter jump from the errmgr back to grpcomm. On rare occasions, this jump did not occur, causing mpirun to hang. This patch looks more invasive than it is - most of the affected files simply had one or two lines removed. The essence of the change is: * pulled the job_complete and quit routines out of orterun and orted_main and put them in a common place * modified the errmgr to directly call the new routines when termination is detected * removed the grpcomm.onesided_barrier and its associated RML tag * add a new "num_routes" API to the routed framework that reports back the number of dependent routes. When route_lost is called, the daemon's list of "children" is checked and adjusted if that route went to a "leaf" in the routing tree * use connection termination between daemons to track rollup of the daemon tree. Daemons and HNP now terminate once num_routes returns zero Also picked up in this commit is the addition of a new bool flag to the app_context struct, and increasing the job_control field from 8 to 16 bits. Both trivial. This commit was SVN r23429.
2010-07-18 01:03:27 +04:00
orte_odls.kill_local_procs(NULL);
Some minor updates to the locking system changes. Remove obsolete locks. Ensure the trigger event objects do not get deconstructed until the very end to avoid possible problems due to race conditions. Route all orted abnormal term tests through the trigger. This commit was SVN r19172.
2008-08-06 15:31:06 +04:00
orte_session_dir_cleanup(ORTE_JOBID_WILDCARD);
abort();
}
Sorry for mid-day commit, but I had promised on the call to do this upon my return. Roll in the ORTE state machine. Remove last traces of opal_sos. Remove UTK epoch code. Please see the various emails about the state machine change for details. I'll send something out later with more info on the new arch. This commit was SVN r26242.
2012-04-06 18:23:13 +04:00
opal_output(0, "%s is executing clean abnormal termination", ORTE_NAME_PRINT(ORTE_PROC_MY_NAME));
/* do -not- call finalize as this will send a message to the HNP
* indicating clean termination! Instead, just forcibly cleanup
* the local session_dir tree and exit
*/
orte_odls.kill_local_procs(NULL);
orte_session_dir_cleanup(ORTE_JOBID_WILDCARD);
exit(ORTE_ERROR_DEFAULT_EXIT_CODE);
Ensure that the orteds do not directly respond to USR1/2 signals. Those signals are trapped by mpirun and propagated from there - at most, the orteds are involved in the propagation process, but should never do anything on their own. This commit was SVN r16098.
2007-09-12 18:32:31 +04:00
}
Копировать постоянную ссылку