ports/openmpi
ports/openmpi
1
1
Форкнуть 0
Код Релизы Активность
92c2ff91ec
openmpi/orte/mca/ras/lsf/configure.m4

44 строки
1.5 KiB
Plaintext
Исходник Обычный вид История

* Rewrite ompi_mca.m4 to use m4_defined lists of projects (ompi, orte, etc.), frameworks, and components without configure scripts instead of hard-coded shell variables (for projects and frameworks) and shell variable building (for components). * Add 3rd category of component configuration (in addition to configure scripts and no-configured components): configure.m4 components. These components can only be built as part of OMPI (like no-configure), but can provide an m4 file that is run as part of the main configure script. These macros can set whether the component should be built, along with just about any other configuration wanted. More care must be taken compared to configure components, as doing things like setting variables or calling AC_MSG_ERROR now affects the top-level configure script (so calling AC_MSG_ERROR if your component can't configure probably isn't what you want) * Added support to autogen.sh for the configure.m4-style components, as well as building up the m4_define lists ompi_mca.m4 now expects * Updated a number of macros to be more config.cache friendly (both so that config.cache can be used and so the test can be quickly run multiple times in the same configrue script): - ompi_config_asm - c_weak_symbols - c_get_alignment * Added new macros to be shared when configuring components: - ompi_objc.m4 (this actually provides AC_PROG_OBJC - don't ask...) - ompi_check_xgrid - ompi_check_tm - ompi_check_bproc * Updated a number of components to use configure.m4 instead of configure.stub - btl portals - io romio - tm ras and pls - bjs, lsf_bproc ras and bproc_seed pls - xgrid ras and pls - null iof (used by tm) This commit was SVN r6412.
2005-07-09 22:52:53 +04:00
# -*- shell-script -*-
#
Update the copyright notices for IU and UTK. This commit was SVN r7999.
2005-11-05 22:57:48 +03:00
# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
# University Research and Technology
# Corporation. All rights reserved.
# Copyright (c) 2004-2005 The University of Tennessee and The University
# of Tennessee Research Foundation. All rights
# reserved.
* Rewrite ompi_mca.m4 to use m4_defined lists of projects (ompi, orte, etc.), frameworks, and components without configure scripts instead of hard-coded shell variables (for projects and frameworks) and shell variable building (for components). * Add 3rd category of component configuration (in addition to configure scripts and no-configured components): configure.m4 components. These components can only be built as part of OMPI (like no-configure), but can provide an m4 file that is run as part of the main configure script. These macros can set whether the component should be built, along with just about any other configuration wanted. More care must be taken compared to configure components, as doing things like setting variables or calling AC_MSG_ERROR now affects the top-level configure script (so calling AC_MSG_ERROR if your component can't configure probably isn't what you want) * Added support to autogen.sh for the configure.m4-style components, as well as building up the m4_define lists ompi_mca.m4 now expects * Updated a number of macros to be more config.cache friendly (both so that config.cache can be used and so the test can be quickly run multiple times in the same configrue script): - ompi_config_asm - c_weak_symbols - c_get_alignment * Added new macros to be shared when configuring components: - ompi_objc.m4 (this actually provides AC_PROG_OBJC - don't ask...) - ompi_check_xgrid - ompi_check_tm - ompi_check_bproc * Updated a number of components to use configure.m4 instead of configure.stub - btl portals - io romio - tm ras and pls - bjs, lsf_bproc ras and bproc_seed pls - xgrid ras and pls - null iof (used by tm) This commit was SVN r6412.
2005-07-09 22:52:53 +04:00
# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
# University of Stuttgart. All rights reserved.
# Copyright (c) 2004-2005 The Regents of the University of California.
# All rights reserved.
lsf configury: add dependent libraries for static linking Ensure to add the LSF dependent libraries and LD flags for the wrapper compiler static linking case.
2014-12-02 01:59:10 +03:00
# Copyright (c) 2009-2014 Cisco Systems, Inc. All rights reserved.
Remove the old configure option for disabling full rte support - we now use the OMPI rte framework for such purposes This commit was SVN r28134.
2013-02-28 05:35:55 +04:00
# Copyright (c) 2011-2013 Los Alamos National Security, LLC.
This is actually a much smaller commit than it appears at first glance - it just touches a lot of files. The --without-rte-support configuration option has never really been implemented completely. The option caused various objects not to be defined and conditionally compiled some base functions, but did nothing to prevent build of the component libraries. Unfortunately, since many of those components use objects covered by the option, it caused builds to break if those components were allowed to build. Brian dealt with this in the past by creating platform files and using "no-build" to block the components. This was clunky, but acceptable when only one organization was using that option. However, that number has now expanded to at least two more locations. Accordingly, make --without-rte-support actually work by adding appropriate configury to prevent components from building when they shouldn't. While doing so, remove two frameworks (db and rmcast) that are no longer used as ORCM comes to a close (besides, they belonged in ORCM now anyway). Do some minor cleanups along the way. This commit was SVN r25497.
2011-11-23 01:24:35 +04:00
# All rights reserved.
* Rewrite ompi_mca.m4 to use m4_defined lists of projects (ompi, orte, etc.), frameworks, and components without configure scripts instead of hard-coded shell variables (for projects and frameworks) and shell variable building (for components). * Add 3rd category of component configuration (in addition to configure scripts and no-configured components): configure.m4 components. These components can only be built as part of OMPI (like no-configure), but can provide an m4 file that is run as part of the main configure script. These macros can set whether the component should be built, along with just about any other configuration wanted. More care must be taken compared to configure components, as doing things like setting variables or calling AC_MSG_ERROR now affects the top-level configure script (so calling AC_MSG_ERROR if your component can't configure probably isn't what you want) * Added support to autogen.sh for the configure.m4-style components, as well as building up the m4_define lists ompi_mca.m4 now expects * Updated a number of macros to be more config.cache friendly (both so that config.cache can be used and so the test can be quickly run multiple times in the same configrue script): - ompi_config_asm - c_weak_symbols - c_get_alignment * Added new macros to be shared when configuring components: - ompi_objc.m4 (this actually provides AC_PROG_OBJC - don't ask...) - ompi_check_xgrid - ompi_check_tm - ompi_check_bproc * Updated a number of components to use configure.m4 instead of configure.stub - btl portals - io romio - tm ras and pls - bjs, lsf_bproc ras and bproc_seed pls - xgrid ras and pls - null iof (used by tm) This commit was SVN r6412.
2005-07-09 22:52:53 +04:00
# $COPYRIGHT$
#
# Additional copyrights may follow
#
# $HEADER$
#
First cut at revamping bproc support to separate it out from LANL's configuration. First cut at adding support for LSF Lots of ompi_ignores so only Jeff and I will see this stuff This commit was SVN r15321.
2007-07-10 16:43:05 +04:00
# MCA_ras_lsf_CONFIG([action-if-found], [action-if-not-found])
* disable TCP ptl and oob components if there is no TCP support (look at sockaddr_in - seems to be a good indicator) * disable util/if code if no inet devices (again, no sockaddr_in) * add enable/disable flag to disable stacktrace pretty-print code (defaults to enabled). Seems there's something funky going on with the preprocessor on Red Storm that was causing problems - this was the easiest fix * clean up a bunch of the configure.m4 files to remove bogus comments, properly comment them, fix the dumb logic for happy/unhappy * Create a macro for testing both header and library for a package, since we seem to do this kind of test quite often. Handles the -I and -L search paths properly (including stripping out /usr and /usr/local if not needed) * Converted mvapi components to configure.m4, using the nice new ompi_check_package macro (above) This commit was SVN r6454.
2005-07-13 08:16:03 +04:00
# -----------------------------------------------------------
WARNING: Work on the temp branch being merged here encountered problems with bugs in subversion. Considerable effort has gone into validating the branch. However, not all conditions can be checked, so users are cautioned that it may be advisable to not update from the trunk for a few days to allow MTT to identify platform-specific issues. This merges the branch containing the revamped build system based around converting autogen from a bash script to a Perl program. Jeff has provided emails explaining the features contained in the change. Please note that configure requirements on components HAVE CHANGED. For example. a configure.params file is no longer required in each component directory. See Jeff's emails for an explanation. This commit was SVN r23764.
2010-09-18 03:04:06 +04:00
AC_DEFUN([MCA_orte_ras_lsf_CONFIG],[
AC_CONFIG_FILES([orte/mca/ras/lsf/Makefile])
Courtesy of Ralph and Jeff: Continue the reorganization of the configure system. Move files from the main config directory to their appropriate level-specific config directories. Modify the configure system to correctly handle compiler detection, test, and setup so that all things pertaining to opal and orte are done at the lower level, with the ompi configure system only looking at mpi-specific options. Ensure the wrapper compilers for orte and ompi only get built when appropriate. Add support for c++ to the orte wrapper compilers, both script and non-script versions. This commit was SVN r22138.
2009-10-24 05:04:35 +04:00
ORTE_CHECK_LSF([ras_lsf], [ras_lsf_good=1], [ras_lsf_good=0])
* Rewrite ompi_mca.m4 to use m4_defined lists of projects (ompi, orte, etc.), frameworks, and components without configure scripts instead of hard-coded shell variables (for projects and frameworks) and shell variable building (for components). * Add 3rd category of component configuration (in addition to configure scripts and no-configured components): configure.m4 components. These components can only be built as part of OMPI (like no-configure), but can provide an m4 file that is run as part of the main configure script. These macros can set whether the component should be built, along with just about any other configuration wanted. More care must be taken compared to configure components, as doing things like setting variables or calling AC_MSG_ERROR now affects the top-level configure script (so calling AC_MSG_ERROR if your component can't configure probably isn't what you want) * Added support to autogen.sh for the configure.m4-style components, as well as building up the m4_define lists ompi_mca.m4 now expects * Updated a number of macros to be more config.cache friendly (both so that config.cache can be used and so the test can be quickly run multiple times in the same configrue script): - ompi_config_asm - c_weak_symbols - c_get_alignment * Added new macros to be shared when configuring components: - ompi_objc.m4 (this actually provides AC_PROG_OBJC - don't ask...) - ompi_check_xgrid - ompi_check_tm - ompi_check_bproc * Updated a number of components to use configure.m4 instead of configure.stub - btl portals - io romio - tm ras and pls - bjs, lsf_bproc ras and bproc_seed pls - xgrid ras and pls - null iof (used by tm) This commit was SVN r6412.
2005-07-09 22:52:53 +04:00
* disable TCP ptl and oob components if there is no TCP support (look at sockaddr_in - seems to be a good indicator) * disable util/if code if no inet devices (again, no sockaddr_in) * add enable/disable flag to disable stacktrace pretty-print code (defaults to enabled). Seems there's something funky going on with the preprocessor on Red Storm that was causing problems - this was the easiest fix * clean up a bunch of the configure.m4 files to remove bogus comments, properly comment them, fix the dumb logic for happy/unhappy * Create a macro for testing both header and library for a package, since we seem to do this kind of test quite often. Handles the -I and -L search paths properly (including stripping out /usr and /usr/local if not needed) * Converted mvapi components to configure.m4, using the nice new ompi_check_package macro (above) This commit was SVN r6454.
2005-07-13 08:16:03 +04:00
# if check worked, set wrapper flags if so.
# Evaluate succeed / fail
Remove the old configure option for disabling full rte support - we now use the OMPI rte framework for such purposes This commit was SVN r28134.
2013-02-28 05:35:55 +04:00
AS_IF([test "$ras_lsf_good" = "1"],
Revert "Cleanup static build requirements by adding the wrapper flags back to the component configure.m4's. Minor cleanup of the lsf configure logic." This reverts commit open-mpi/ompi@32bf0e7b7ee126b0433950a544f3e33c7cc9c76e.
2014-12-04 00:15:20 +03:00
[$1],
* disable TCP ptl and oob components if there is no TCP support (look at sockaddr_in - seems to be a good indicator) * disable util/if code if no inet devices (again, no sockaddr_in) * add enable/disable flag to disable stacktrace pretty-print code (defaults to enabled). Seems there's something funky going on with the preprocessor on Red Storm that was causing problems - this was the easiest fix * clean up a bunch of the configure.m4 files to remove bogus comments, properly comment them, fix the dumb logic for happy/unhappy * Create a macro for testing both header and library for a package, since we seem to do this kind of test quite often. Handles the -I and -L search paths properly (including stripping out /usr and /usr/local if not needed) * Converted mvapi components to configure.m4, using the nice new ompi_check_package macro (above) This commit was SVN r6454.
2005-07-13 08:16:03 +04:00
[$2])
* Rewrite ompi_mca.m4 to use m4_defined lists of projects (ompi, orte, etc.), frameworks, and components without configure scripts instead of hard-coded shell variables (for projects and frameworks) and shell variable building (for components). * Add 3rd category of component configuration (in addition to configure scripts and no-configured components): configure.m4 components. These components can only be built as part of OMPI (like no-configure), but can provide an m4 file that is run as part of the main configure script. These macros can set whether the component should be built, along with just about any other configuration wanted. More care must be taken compared to configure components, as doing things like setting variables or calling AC_MSG_ERROR now affects the top-level configure script (so calling AC_MSG_ERROR if your component can't configure probably isn't what you want) * Added support to autogen.sh for the configure.m4-style components, as well as building up the m4_define lists ompi_mca.m4 now expects * Updated a number of macros to be more config.cache friendly (both so that config.cache can be used and so the test can be quickly run multiple times in the same configrue script): - ompi_config_asm - c_weak_symbols - c_get_alignment * Added new macros to be shared when configuring components: - ompi_objc.m4 (this actually provides AC_PROG_OBJC - don't ask...) - ompi_check_xgrid - ompi_check_tm - ompi_check_bproc * Updated a number of components to use configure.m4 instead of configure.stub - btl portals - io romio - tm ras and pls - bjs, lsf_bproc ras and bproc_seed pls - xgrid ras and pls - null iof (used by tm) This commit was SVN r6412.
2005-07-09 22:52:53 +04:00
Revert "Cleanup static build requirements by adding the wrapper flags back to the component configure.m4's. Minor cleanup of the lsf configure logic." This reverts commit open-mpi/ompi@32bf0e7b7ee126b0433950a544f3e33c7cc9c76e.
2014-12-04 00:15:20 +03:00
$1_WRAPPER_EXTRA_LDFLAGS=[$]$1_LDFLAGS
$1_WRAPPER_EXTRA_LIBS=[$]$1_LIBS
* disable TCP ptl and oob components if there is no TCP support (look at sockaddr_in - seems to be a good indicator) * disable util/if code if no inet devices (again, no sockaddr_in) * add enable/disable flag to disable stacktrace pretty-print code (defaults to enabled). Seems there's something funky going on with the preprocessor on Red Storm that was causing problems - this was the easiest fix * clean up a bunch of the configure.m4 files to remove bogus comments, properly comment them, fix the dumb logic for happy/unhappy * Create a macro for testing both header and library for a package, since we seem to do this kind of test quite often. Handles the -I and -L search paths properly (including stripping out /usr and /usr/local if not needed) * Converted mvapi components to configure.m4, using the nice new ompi_check_package macro (above) This commit was SVN r6454.
2005-07-13 08:16:03 +04:00
# set build flags to use in makefile
First cut at revamping bproc support to separate it out from LANL's configuration. First cut at adding support for LSF Lots of ompi_ignores so only Jeff and I will see this stuff This commit was SVN r15321.
2007-07-10 16:43:05 +04:00
AC_SUBST([ras_lsf_CPPFLAGS])
AC_SUBST([ras_lsf_LDFLAGS])
AC_SUBST([ras_lsf_LIBS])
* Rewrite ompi_mca.m4 to use m4_defined lists of projects (ompi, orte, etc.), frameworks, and components without configure scripts instead of hard-coded shell variables (for projects and frameworks) and shell variable building (for components). * Add 3rd category of component configuration (in addition to configure scripts and no-configured components): configure.m4 components. These components can only be built as part of OMPI (like no-configure), but can provide an m4 file that is run as part of the main configure script. These macros can set whether the component should be built, along with just about any other configuration wanted. More care must be taken compared to configure components, as doing things like setting variables or calling AC_MSG_ERROR now affects the top-level configure script (so calling AC_MSG_ERROR if your component can't configure probably isn't what you want) * Added support to autogen.sh for the configure.m4-style components, as well as building up the m4_define lists ompi_mca.m4 now expects * Updated a number of macros to be more config.cache friendly (both so that config.cache can be used and so the test can be quickly run multiple times in the same configrue script): - ompi_config_asm - c_weak_symbols - c_get_alignment * Added new macros to be shared when configuring components: - ompi_objc.m4 (this actually provides AC_PROG_OBJC - don't ask...) - ompi_check_xgrid - ompi_check_tm - ompi_check_bproc * Updated a number of components to use configure.m4 instead of configure.stub - btl portals - io romio - tm ras and pls - bjs, lsf_bproc ras and bproc_seed pls - xgrid ras and pls - null iof (used by tm) This commit was SVN r6412.
2005-07-09 22:52:53 +04:00
])dnl
Копировать постоянную ссылку