1
1
openmpi/ompi/mca/sbgp/basesmuma/sbgp_basesmuma_component.c

209 строки
5.5 KiB
C
Исходник Обычный вид История

coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 15:39:19 +00:00
/* -*- Mode: C; c-basic-offset:4 ; indent-tabs-mode:nil -*- */
/*
* Copyright (c) 2009-2012 Oak Ridge National Laboratory. All rights reserved.
* Copyright (c) 2009-2012 Mellanox Technologies. All rights reserved.
* Copyright (c) 2013-2015 Los Alamos National Security, LLC. All rights
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 15:39:19 +00:00
* reserved.
* $COPYRIGHT$
*
* Additional copyrights may follow
*
* $HEADER$
*/
/**
* @file
*
*/
#include "ompi_config.h"
#ifdef HAVE_UNISTD_H
#include <unistd.h>
#endif
#include <sys/types.h>
#ifdef HAVE_SYS_MMAN_H
#include <sys/mman.h>
#endif
#include <fcntl.h>
#include "ompi/constants.h"
#include "ompi/communicator/communicator.h"
#include "sbgp_basesmuma.h"
/*
* Public string showing the coll ompi_sm V2 component version number
*/
const char *mca_sbgp_basesmuma_component_version_string =
"Open MPI sbgp - basesmuma collective MCA component version " OMPI_VERSION;
/*
* Local functions
*/
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-27 21:09:41 +00:00
static int basesmuma_register(void);
static int basesmuma_open(void);
static int basesmuma_close(void);
static mca_sbgp_base_module_t *mca_sbgp_basesmuma_select_procs(struct ompi_proc_t ** procs,
int n_procs_in, struct ompi_communicator_t *comm, char *key, void *output_data);
static int mca_sbgp_basesmuma_init_query(bool enable_progress_threads,
bool enable_mpi_threads);
/*
* Instantiate the public struct with all of our public information
* and pointers to our public functions in it
*/
mca_sbgp_basesmuma_component_t mca_sbgp_basesmuma_component = {
/* First, fill in the super */
{
/* First, the mca_component_t struct containing meta
information about the component itself */
.sbgp_version = {
MCA_SBGP_BASE_VERSION_2_0_0,
/* Component name and version */
.mca_component_name = "basesmuma",
MCA_BASE_MAKE_VERSION(component, OMPI_MAJOR_VERSION, OMPI_MINOR_VERSION,
OMPI_RELEASE_VERSION),
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-27 21:09:41 +00:00
/* Component open, close, and register functions */
.mca_open_component = basesmuma_open,
.mca_close_component = basesmuma_close,
.mca_register_component_params = basesmuma_register,
},
.sbgp_init_query = mca_sbgp_basesmuma_init_query,
.select_procs = mca_sbgp_basesmuma_select_procs,
.priority = 0,
}
};
/*
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-27 21:09:41 +00:00
* Register the component
*/
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-27 21:09:41 +00:00
static int basesmuma_register(void)
{
mca_sbgp_basesmuma_component_t *cs = &mca_sbgp_basesmuma_component;
/* set component priority */
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-27 21:09:41 +00:00
cs->super.priority = 90;
(void) mca_base_component_var_register(&cs->super.sbgp_version,
"priority", "Priority of the sbgp basesmuma",
MCA_BASE_VAR_TYPE_INT, NULL, 0, 0,
OPAL_INFO_LVL_9,
MCA_BASE_VAR_SCOPE_READONLY,
&cs->super.priority);
return OMPI_SUCCESS;
}
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-27 21:09:41 +00:00
/*
* Open the component
*/
static int basesmuma_open(void)
{
return OMPI_SUCCESS;
}
/*
* Close the component
*/
static int basesmuma_close(void)
{
return OMPI_SUCCESS;
}
/* query to see if the component is available for use, and can
* satisfy the thread and progress requirements
*/
int mca_sbgp_basesmuma_init_query(bool enable_progress_threads,
bool enable_mpi_threads)
{
/* at this stage there is no reason to disaulify this component */
/* done */
return OMPI_SUCCESS;
}
/* This routine is used to find the list of procs that run on the
** same host as the calling process.
*/
static mca_sbgp_base_module_t *mca_sbgp_basesmuma_select_procs(struct ompi_proc_t ** procs,
int n_procs_in,
struct ompi_communicator_t *comm,
char *key,
void *output_data
)
{
/* local variables */
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 15:39:19 +00:00
int cnt,proc,local,last_local_proc;
mca_sbgp_basesmuma_module_t *module;
module=OBJ_NEW(mca_sbgp_basesmuma_module_t);
if (!module ) {
return NULL;
}
module->super.group_size=0;
module->super.group_comm = comm;
module->super.group_list = NULL;
module->super.group_net = OMPI_SBGP_MUMA;
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 15:39:19 +00:00
for (proc = 0, cnt = 0, last_local_proc = 0 ; proc < n_procs_in ; ++proc) {
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 00:47:28 +00:00
local = OPAL_PROC_ON_LOCAL_NODE(procs[proc]->super.proc_flags);
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 15:39:19 +00:00
if (local) {
last_local_proc = proc;
cnt++;
}
}
/* if no other local procs found skip to end */
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 15:39:19 +00:00
if( 2 > cnt ) {
/* There's always at least one - namely myself */
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 15:39:19 +00:00
assert(1 == cnt);
module->super.group_size = 1;
module->super.group_list = (int *) malloc (sizeof (int));
module->super.group_list[0] = last_local_proc;
/* let ml handle this case */
goto OneLocalPeer;
}
/* generate list of local ranks */
module->super.group_size=cnt;
if( cnt > 0 ) {
module->super.group_list=(int *)malloc(sizeof(int)*cnt);
if(NULL == module->super.group_list){
goto Error;
}
}
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 15:39:19 +00:00
for (proc = 0, cnt = 0 ; proc < n_procs_in ; ++proc) {
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 00:47:28 +00:00
local = OPAL_PROC_ON_LOCAL_NODE(procs[proc]->super.proc_flags);
if( local ) {
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 15:39:19 +00:00
module->super.group_list[cnt++] = proc;
}
}
OneLocalPeer:
/* successful completion */
return (mca_sbgp_base_module_t *)module;
/* return with error */
Error:
/* clean up */
if( NULL != module->super.group_list ) {
free(module->super.group_list);
module->super.group_list=NULL;
}
OBJ_RELEASE(module);
return NULL;
}