2009-07-01 01:41:28 +04:00
|
|
|
/*
|
A number of C/R enhancements per RFC below:
http://www.open-mpi.org/community/lists/devel/2010/07/8240.php
Documentation:
http://osl.iu.edu/research/ft/
Major Changes:
--------------
* Added C/R-enabled Debugging support.
Enabled with the --enable-crdebug flag. See the following website for more information:
http://osl.iu.edu/research/ft/crdebug/
* Added Stable Storage (SStore) framework for checkpoint storage
* 'central' component does a direct to central storage save
* 'stage' component stages checkpoints to central storage while the application continues execution.
* 'stage' supports offline compression of checkpoints before moving (sstore_stage_compress)
* 'stage' supports local caching of checkpoints to improve automatic recovery (sstore_stage_caching)
* Added Compression (compress) framework to support
* Add two new ErrMgr recovery policies
* {{{crmig}}} C/R Process Migration
* {{{autor}}} C/R Automatic Recovery
* Added the {{{ompi-migrate}}} command line tool to support the {{{crmig}}} ErrMgr component
* Added CR MPI Ext functions (enable them with {{{--enable-mpi-ext=cr}}} configure option)
* {{{OMPI_CR_Checkpoint}}} (Fixes trac:2342)
* {{{OMPI_CR_Restart}}}
* {{{OMPI_CR_Migrate}}} (may need some more work for mapping rules)
* {{{OMPI_CR_INC_register_callback}}} (Fixes trac:2192)
* {{{OMPI_CR_Quiesce_start}}}
* {{{OMPI_CR_Quiesce_checkpoint}}}
* {{{OMPI_CR_Quiesce_end}}}
* {{{OMPI_CR_self_register_checkpoint_callback}}}
* {{{OMPI_CR_self_register_restart_callback}}}
* {{{OMPI_CR_self_register_continue_callback}}}
* The ErrMgr predicted_fault() interface has been changed to take an opal_list_t of ErrMgr defined types. This will allow us to better support a wider range of fault prediction services in the future.
* Add a progress meter to:
* FileM rsh (filem_rsh_process_meter)
* SnapC full (snapc_full_progress_meter)
* SStore stage (sstore_stage_progress_meter)
* Added 2 new command line options to ompi-restart
* --showme : Display the full command line that would have been exec'ed.
* --mpirun_opts : Command line options to pass directly to mpirun. (Fixes trac:2413)
* Deprecated some MCA params:
* crs_base_snapshot_dir deprecated, use sstore_stage_local_snapshot_dir
* snapc_base_global_snapshot_dir deprecated, use sstore_base_global_snapshot_dir
* snapc_base_global_shared deprecated, use sstore_stage_global_is_shared
* snapc_base_store_in_place deprecated, replaced with different components of SStore
* snapc_base_global_snapshot_ref deprecated, use sstore_base_global_snapshot_ref
* snapc_base_establish_global_snapshot_dir deprecated, never well supported
* snapc_full_skip_filem deprecated, use sstore_stage_skip_filem
Minor Changes:
--------------
* Fixes trac:1924 : {{{ompi-restart}}} now recognizes path prefixed checkpoint handles and does the right thing.
* Fixes trac:2097 : {{{ompi-info}}} should now report all available CRS components
* Fixes trac:2161 : Manual checkpoint movement. A user can 'mv' a checkpoint directory from the original location to another and still restart from it.
* Fixes trac:2208 : Honor various TMPDIR varaibles instead of forcing {{{/tmp}}}
* Move {{{ompi_cr_continue_like_restart}}} to {{{orte_cr_continue_like_restart}}} to be more flexible in where this should be set.
* opal_crs_base_metadata_write* functions have been moved to SStore to support a wider range of metadata handling functionality.
* Cleanup the CRS framework and components to work with the SStore framework.
* Cleanup the SnapC framework and components to work with the SStore framework (cleans up these code paths considerably).
* Add 'quiesce' hook to CRCP for a future enhancement.
* We now require a BLCR version that supports {{{cr_request_file()}}} or {{{cr_request_checkpoint()}}} in order to make the code more maintainable. Note that {{{cr_request_file}}} has been deprecated since 0.7.0, so we prefer to use {{{cr_request_checkpoint()}}}.
* Add optional application level INC callbacks (registered through the CR MPI Ext interface).
* Increase the {{{opal_cr_thread_sleep_wait}}} parameter to 1000 microseconds to make the C/R thread less aggressive.
* {{{opal-restart}}} now looks for cache directories before falling back on stable storage when asked.
* {{{opal-restart}}} also support local decompression before restarting
* {{{orte-checkpoint}}} now uses the SStore framework to work with the metadata
* {{{orte-restart}}} now uses the SStore framework to work with the metadata
* Remove the {{{orte-restart}}} preload option. This was removed since the user only needs to select the 'stage' component in order to support this functionality.
* Since the '-am' parameter is saved in the metadata, {{{ompi-restart}}} no longer hard codes {{{-am ft-enable-cr}}}.
* Fix {{{hnp}}} ErrMgr so that if a previous component in the stack has 'fixed' the problem, then it should be skipped.
* Make sure to decrement the number of 'num_local_procs' in the orted when one goes away.
* odls now checks the SStore framework to see if it needs to load any checkpoint files before launching (to support 'stage'). This separates the SStore logic from the --preload-[binary|files] options.
* Add unique IDs to the named pipes established between the orted and the app in SnapC. This is to better support migration and automatic recovery activities.
* Improve the checks for 'already checkpointing' error path.
* A a recovery output timer, to show how long it takes to restart a job
* Do a better job of cleaning up the old session directory on restart.
* Add a local module to the autor and crmig ErrMgr components. These small modules prevent the 'orted' component from attempting a local recovery (Which does not work for MPI apps at the moment)
* Add a fix for bounding the checkpointable region between MPI_Init and MPI_Finalize.
This commit was SVN r23587.
The following Trac tickets were found above:
Ticket 1924 --> https://svn.open-mpi.org/trac/ompi/ticket/1924
Ticket 2097 --> https://svn.open-mpi.org/trac/ompi/ticket/2097
Ticket 2161 --> https://svn.open-mpi.org/trac/ompi/ticket/2161
Ticket 2192 --> https://svn.open-mpi.org/trac/ompi/ticket/2192
Ticket 2208 --> https://svn.open-mpi.org/trac/ompi/ticket/2208
Ticket 2342 --> https://svn.open-mpi.org/trac/ompi/ticket/2342
Ticket 2413 --> https://svn.open-mpi.org/trac/ompi/ticket/2413
2010-08-11 00:51:11 +04:00
|
|
|
* Copyright (c) 2004-2010 The Trustees of Indiana University and Indiana
|
2009-07-01 01:41:28 +04:00
|
|
|
* University Research and Technology
|
|
|
|
|
* Corporation. All rights reserved.
|
|
|
|
|
* Copyright (c) 2004-2006 The University of Tennessee and The University
|
|
|
|
|
* of Tennessee Research Foundation. All rights
|
|
|
|
|
* reserved.
|
|
|
|
|
* Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
|
|
|
|
|
* University of Stuttgart. All rights reserved.
|
|
|
|
|
* Copyright (c) 2004-2005 The Regents of the University of California.
|
|
|
|
|
* All rights reserved.
|
== Highlights ==
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
|
|
|
* Copyright (c) 2007-2012 Cisco Systems, Inc. All rights reserved.
|
2012-06-27 05:28:28 +04:00
|
|
|
* Copyright (c) 2009 Oak Ridge National Labs. All rights reserved.
|
2009-07-01 01:41:28 +04:00
|
|
|
* $COPYRIGHT$
|
|
|
|
|
*
|
|
|
|
|
* Additional copyrights may follow
|
|
|
|
|
*
|
|
|
|
|
* $HEADER$
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#include "ompi_config.h"
|
|
|
|
|
#include "mpi.h"
|
|
|
|
|
|
2009-07-01 17:19:06 +04:00
|
|
|
#include <string.h>
|
2009-07-01 01:41:28 +04:00
|
|
|
#include <ctype.h>
|
2009-07-16 22:27:33 +04:00
|
|
|
#ifdef HAVE_UNISTD_H
|
2009-07-01 01:41:28 +04:00
|
|
|
#include <unistd.h>
|
|
|
|
|
#endif
|
2009-07-16 22:27:33 +04:00
|
|
|
#ifdef HAVE_SYS_PARAM_H
|
2009-07-01 01:41:28 +04:00
|
|
|
#include <sys/param.h>
|
|
|
|
|
#endif
|
|
|
|
|
#ifdef HAVE_NETDB_H
|
|
|
|
|
#include <netdb.h>
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#include MCA_timer_IMPLEMENTATION_HEADER
|
|
|
|
|
#include "opal/class/opal_value_array.h"
|
|
|
|
|
#include "opal/class/opal_pointer_array.h"
|
|
|
|
|
#include "opal/util/printf.h"
|
|
|
|
|
#include "opal/memoryhooks/memory.h"
|
|
|
|
|
#include "opal/mca/base/mca_base_param.h"
|
2012-06-28 22:23:34 +04:00
|
|
|
#include "opal/runtime/opal_info_support.h"
|
2009-07-01 01:41:28 +04:00
|
|
|
|
2012-06-27 05:28:28 +04:00
|
|
|
#include "orte/util/show_help.h"
|
2009-07-01 01:41:28 +04:00
|
|
|
|
|
|
|
|
#include "ompi/tools/ompi_info/ompi_info.h"
|
|
|
|
|
#include "ompi/include/mpi_portable_platform.h"
|
|
|
|
|
|
|
|
|
|
|
== Highlights ==
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
|
|
|
const char *ompi_info_deprecated_value = "deprecated-ompi-info-value";
|
|
|
|
|
|
|
|
|
|
static void append(char *dest, size_t max, int *first, char *src)
|
|
|
|
|
{
|
|
|
|
|
size_t len;
|
|
|
|
|
|
|
|
|
|
if (NULL == src) {
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
len = max - strlen(dest);
|
|
|
|
|
if (!(*first)) {
|
|
|
|
|
strncat(dest, ", ", len);
|
|
|
|
|
len = max - strlen(dest);
|
|
|
|
|
}
|
|
|
|
|
strncat(dest, src, len);
|
|
|
|
|
*first = 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
2009-07-01 01:41:28 +04:00
|
|
|
/*
|
|
|
|
|
* do_config
|
|
|
|
|
* Accepts:
|
|
|
|
|
* - want_all: boolean flag; TRUE -> display all options
|
|
|
|
|
* FALSE -> display selected options
|
|
|
|
|
*
|
|
|
|
|
* This function displays all the options with which the current
|
|
|
|
|
* installation of ompi was configured. There are many options here
|
|
|
|
|
* that are carried forward from OMPI-7 and are not mca parameters
|
|
|
|
|
* in OMPI-10. I have to dig through the invalid options and replace
|
|
|
|
|
* them with OMPI-10 options.
|
|
|
|
|
*/
|
|
|
|
|
void ompi_info_do_config(bool want_all)
|
|
|
|
|
{
|
|
|
|
|
char *cxx;
|
== Highlights ==
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
|
|
|
char *fortran_mpifh;
|
|
|
|
|
char *fortran_usempi;
|
|
|
|
|
char *fortran_usempif08;
|
|
|
|
|
char *fortran_usempif08_compliance;
|
|
|
|
|
char *fortran_have_ignore_tkr;
|
|
|
|
|
char *fortran_have_f08_assumed_shape;
|
|
|
|
|
char *fortran_build_f08_subarrays;
|
|
|
|
|
char *fortran_have_optional_args;
|
|
|
|
|
char *fortran_have_bind_c;
|
|
|
|
|
char *fortran_have_private;
|
|
|
|
|
char *fortran_have_abstract;
|
|
|
|
|
char *fortran_have_asynchronous;
|
|
|
|
|
char *fortran_have_procedure;
|
|
|
|
|
char *fortran_08_using_wrappers_for_choice_buffer_functions;
|
2012-02-21 02:12:43 +04:00
|
|
|
char *java;
|
2009-07-01 01:41:28 +04:00
|
|
|
char *heterogeneous;
|
|
|
|
|
char *memprofile;
|
|
|
|
|
char *memdebug;
|
|
|
|
|
char *debug;
|
|
|
|
|
char *mpi_interface_warning;
|
|
|
|
|
char *cprofiling;
|
|
|
|
|
char *cxxprofiling;
|
== Highlights ==
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
|
|
|
char *fortran_mpifh_profiling;
|
|
|
|
|
char *fortran_usempi_profiling;
|
|
|
|
|
char *fortran_usempif08_profiling;
|
2009-07-01 01:41:28 +04:00
|
|
|
char *cxxexceptions;
|
|
|
|
|
char *threads;
|
|
|
|
|
char *want_libltdl;
|
|
|
|
|
char *mpirun_prefix_by_default;
|
|
|
|
|
char *sparse_groups;
|
|
|
|
|
char *have_mpi_io;
|
|
|
|
|
char *wtime_support;
|
|
|
|
|
char *symbol_visibility;
|
|
|
|
|
char *ft_support;
|
A number of C/R enhancements per RFC below:
http://www.open-mpi.org/community/lists/devel/2010/07/8240.php
Documentation:
http://osl.iu.edu/research/ft/
Major Changes:
--------------
* Added C/R-enabled Debugging support.
Enabled with the --enable-crdebug flag. See the following website for more information:
http://osl.iu.edu/research/ft/crdebug/
* Added Stable Storage (SStore) framework for checkpoint storage
* 'central' component does a direct to central storage save
* 'stage' component stages checkpoints to central storage while the application continues execution.
* 'stage' supports offline compression of checkpoints before moving (sstore_stage_compress)
* 'stage' supports local caching of checkpoints to improve automatic recovery (sstore_stage_caching)
* Added Compression (compress) framework to support
* Add two new ErrMgr recovery policies
* {{{crmig}}} C/R Process Migration
* {{{autor}}} C/R Automatic Recovery
* Added the {{{ompi-migrate}}} command line tool to support the {{{crmig}}} ErrMgr component
* Added CR MPI Ext functions (enable them with {{{--enable-mpi-ext=cr}}} configure option)
* {{{OMPI_CR_Checkpoint}}} (Fixes trac:2342)
* {{{OMPI_CR_Restart}}}
* {{{OMPI_CR_Migrate}}} (may need some more work for mapping rules)
* {{{OMPI_CR_INC_register_callback}}} (Fixes trac:2192)
* {{{OMPI_CR_Quiesce_start}}}
* {{{OMPI_CR_Quiesce_checkpoint}}}
* {{{OMPI_CR_Quiesce_end}}}
* {{{OMPI_CR_self_register_checkpoint_callback}}}
* {{{OMPI_CR_self_register_restart_callback}}}
* {{{OMPI_CR_self_register_continue_callback}}}
* The ErrMgr predicted_fault() interface has been changed to take an opal_list_t of ErrMgr defined types. This will allow us to better support a wider range of fault prediction services in the future.
* Add a progress meter to:
* FileM rsh (filem_rsh_process_meter)
* SnapC full (snapc_full_progress_meter)
* SStore stage (sstore_stage_progress_meter)
* Added 2 new command line options to ompi-restart
* --showme : Display the full command line that would have been exec'ed.
* --mpirun_opts : Command line options to pass directly to mpirun. (Fixes trac:2413)
* Deprecated some MCA params:
* crs_base_snapshot_dir deprecated, use sstore_stage_local_snapshot_dir
* snapc_base_global_snapshot_dir deprecated, use sstore_base_global_snapshot_dir
* snapc_base_global_shared deprecated, use sstore_stage_global_is_shared
* snapc_base_store_in_place deprecated, replaced with different components of SStore
* snapc_base_global_snapshot_ref deprecated, use sstore_base_global_snapshot_ref
* snapc_base_establish_global_snapshot_dir deprecated, never well supported
* snapc_full_skip_filem deprecated, use sstore_stage_skip_filem
Minor Changes:
--------------
* Fixes trac:1924 : {{{ompi-restart}}} now recognizes path prefixed checkpoint handles and does the right thing.
* Fixes trac:2097 : {{{ompi-info}}} should now report all available CRS components
* Fixes trac:2161 : Manual checkpoint movement. A user can 'mv' a checkpoint directory from the original location to another and still restart from it.
* Fixes trac:2208 : Honor various TMPDIR varaibles instead of forcing {{{/tmp}}}
* Move {{{ompi_cr_continue_like_restart}}} to {{{orte_cr_continue_like_restart}}} to be more flexible in where this should be set.
* opal_crs_base_metadata_write* functions have been moved to SStore to support a wider range of metadata handling functionality.
* Cleanup the CRS framework and components to work with the SStore framework.
* Cleanup the SnapC framework and components to work with the SStore framework (cleans up these code paths considerably).
* Add 'quiesce' hook to CRCP for a future enhancement.
* We now require a BLCR version that supports {{{cr_request_file()}}} or {{{cr_request_checkpoint()}}} in order to make the code more maintainable. Note that {{{cr_request_file}}} has been deprecated since 0.7.0, so we prefer to use {{{cr_request_checkpoint()}}}.
* Add optional application level INC callbacks (registered through the CR MPI Ext interface).
* Increase the {{{opal_cr_thread_sleep_wait}}} parameter to 1000 microseconds to make the C/R thread less aggressive.
* {{{opal-restart}}} now looks for cache directories before falling back on stable storage when asked.
* {{{opal-restart}}} also support local decompression before restarting
* {{{orte-checkpoint}}} now uses the SStore framework to work with the metadata
* {{{orte-restart}}} now uses the SStore framework to work with the metadata
* Remove the {{{orte-restart}}} preload option. This was removed since the user only needs to select the 'stage' component in order to support this functionality.
* Since the '-am' parameter is saved in the metadata, {{{ompi-restart}}} no longer hard codes {{{-am ft-enable-cr}}}.
* Fix {{{hnp}}} ErrMgr so that if a previous component in the stack has 'fixed' the problem, then it should be skipped.
* Make sure to decrement the number of 'num_local_procs' in the orted when one goes away.
* odls now checks the SStore framework to see if it needs to load any checkpoint files before launching (to support 'stage'). This separates the SStore logic from the --preload-[binary|files] options.
* Add unique IDs to the named pipes established between the orted and the app in SnapC. This is to better support migration and automatic recovery activities.
* Improve the checks for 'already checkpointing' error path.
* A a recovery output timer, to show how long it takes to restart a job
* Do a better job of cleaning up the old session directory on restart.
* Add a local module to the autor and crmig ErrMgr components. These small modules prevent the 'orted' component from attempting a local recovery (Which does not work for MPI apps at the moment)
* Add a fix for bounding the checkpointable region between MPI_Init and MPI_Finalize.
This commit was SVN r23587.
The following Trac tickets were found above:
Ticket 1924 --> https://svn.open-mpi.org/trac/ompi/ticket/1924
Ticket 2097 --> https://svn.open-mpi.org/trac/ompi/ticket/2097
Ticket 2161 --> https://svn.open-mpi.org/trac/ompi/ticket/2161
Ticket 2192 --> https://svn.open-mpi.org/trac/ompi/ticket/2192
Ticket 2208 --> https://svn.open-mpi.org/trac/ompi/ticket/2208
Ticket 2342 --> https://svn.open-mpi.org/trac/ompi/ticket/2342
Ticket 2413 --> https://svn.open-mpi.org/trac/ompi/ticket/2413
2010-08-11 00:51:11 +04:00
|
|
|
char *crdebug_support;
|
2011-09-14 23:22:08 +04:00
|
|
|
char *topology_support;
|
2012-01-27 18:11:33 +04:00
|
|
|
char *vt_support;
|
== Highlights ==
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
|
|
|
|
2012-06-28 22:23:34 +04:00
|
|
|
/* Do a little preprocessor trickery here to figure opal_info_out the
|
2009-07-01 01:41:28 +04:00
|
|
|
* tri-state of MPI_PARAM_CHECK (which will be either 0, 1, or
|
|
|
|
|
* ompi_mpi_param_check). The preprocessor will only allow
|
|
|
|
|
* comparisons against constants, so you'll get a warning if you
|
|
|
|
|
* check MPI_PARAM_CHECK against 0 or 1, but its real value is the
|
|
|
|
|
* char *ompi_mpi_param_check. So define ompi_mpi_param_check to
|
== Highlights ==
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
|
|
|
* be a constant, and then all the preprocessor comparisons work
|
2012-06-28 22:23:34 +04:00
|
|
|
* opal_info_out ok. Note that we chose the preprocessor
|
|
|
|
|
* comparison ropal_info_oute because it is not sufficient to
|
== Highlights ==
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
|
|
|
* simply set the variable ompi_mpi_param_check to a non-0/non-1
|
|
|
|
|
* value. This is because the compiler will generate a warning
|
|
|
|
|
* that that C variable is unused when MPI_PARAM_CHECK is
|
|
|
|
|
* hard-coded to 0 or 1.
|
2009-07-01 01:41:28 +04:00
|
|
|
*/
|
|
|
|
|
char *paramcheck;
|
|
|
|
|
#define ompi_mpi_param_check 999
|
|
|
|
|
#if 0 == MPI_PARAM_CHECK
|
|
|
|
|
paramcheck = "never";
|
|
|
|
|
#elif 1 == MPI_PARAM_CHECK
|
|
|
|
|
paramcheck = "always";
|
|
|
|
|
#else
|
|
|
|
|
paramcheck = "runtime";
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
/* setup the strings that don't require allocations*/
|
== Highlights ==
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
|
|
|
cxx = OMPI_BUILD_CXX_BINDINGS ? "yes" : "no";
|
|
|
|
|
if (OMPI_BUILD_FORTRAN_USEMPI_BINDINGS) {
|
|
|
|
|
if (OMPI_FORTRAN_HAVE_IGNORE_TKR) {
|
|
|
|
|
fortran_usempi = "yes (full: ignore TKR)";
|
|
|
|
|
} else {
|
|
|
|
|
fortran_usempi = "yes (limited: overloading)";
|
|
|
|
|
}
|
|
|
|
|
} else {
|
|
|
|
|
fortran_usempi = "no";
|
|
|
|
|
}
|
|
|
|
|
fortran_usempif08 = OMPI_BUILD_FORTRAN_USEMPIF08_BINDINGS ? "yes" : "no";
|
|
|
|
|
fortran_have_f08_assumed_shape = OMPI_FORTRAN_HAVE_F08_ASSUMED_SHAPE ?
|
|
|
|
|
"yes" : "no";
|
|
|
|
|
fortran_build_f08_subarrays = OMPI_BUILD_FORTRAN_F08_SUBARRAYS ?
|
|
|
|
|
"yes" : "no";
|
|
|
|
|
fortran_have_optional_args = OMPI_FORTRAN_HAVE_OPTIONAL_ARGS ?
|
|
|
|
|
"yes" : "no";
|
|
|
|
|
fortran_have_bind_c = OMPI_FORTRAN_HAVE_BIND_C ? "yes" : "no";
|
|
|
|
|
fortran_have_private = OMPI_FORTRAN_HAVE_PRIVATE ? "yes" : "no";
|
|
|
|
|
fortran_have_abstract = OMPI_FORTRAN_HAVE_ABSTRACT ? "yes" : "no";
|
|
|
|
|
fortran_have_asynchronous = OMPI_FORTRAN_HAVE_ASYNCHRONOUS ? "yes" : "no";
|
|
|
|
|
fortran_have_procedure = OMPI_FORTRAN_HAVE_PROCEDURE ? "yes" : "no";
|
|
|
|
|
fortran_08_using_wrappers_for_choice_buffer_functions =
|
|
|
|
|
OMPI_FORTRAN_NEED_WRAPPER_ROUTINES ? "yes" : "no";
|
|
|
|
|
|
|
|
|
|
/* Build a string describing what level of compliance the mpi_f08
|
|
|
|
|
module has */
|
|
|
|
|
if (OMPI_BUILD_FORTRAN_USEMPIF08_BINDINGS) {
|
|
|
|
|
|
|
|
|
|
/* Do we have everything? */
|
|
|
|
|
if (OMPI_BUILD_FORTRAN_F08_SUBARRAYS &&
|
|
|
|
|
OMPI_FORTRAN_HAVE_PRIVATE &&
|
|
|
|
|
OMPI_FORTRAN_HAVE_ABSTRACT &&
|
|
|
|
|
OMPI_FORTRAN_HAVE_ASYNCHRONOUS &&
|
|
|
|
|
OMPI_FORTRAN_HAVE_PROCEDURE &&
|
|
|
|
|
OMPI_FORTRAN_NEED_WRAPPER_ROUTINES) {
|
|
|
|
|
fortran_usempif08_compliance = strdup("The mpi_f08 module is available, and is fully compliant. w00t!");
|
|
|
|
|
} else {
|
|
|
|
|
char f08[1024];
|
|
|
|
|
int first = 1;
|
|
|
|
|
snprintf(f08, sizeof(f08),
|
|
|
|
|
"The mpi_f08 module is available, but due to limitations in the %s compiler, does not support the following: ",
|
|
|
|
|
OMPI_FC);
|
|
|
|
|
if (!OMPI_BUILD_FORTRAN_F08_SUBARRAYS) {
|
|
|
|
|
append(f08, sizeof(f08), &first, "array subsections");
|
|
|
|
|
}
|
|
|
|
|
if (!OMPI_FORTRAN_HAVE_PRIVATE) {
|
|
|
|
|
append(f08, sizeof(f08), &first, "private MPI_Status members");
|
|
|
|
|
}
|
|
|
|
|
if (!OMPI_FORTRAN_HAVE_ABSTRACT) {
|
|
|
|
|
append(f08, sizeof(f08), &first, "ABSTRACT INTERFACE function pointers");
|
|
|
|
|
}
|
|
|
|
|
if (!OMPI_FORTRAN_HAVE_ASYNCHRONOUS) {
|
|
|
|
|
append(f08, sizeof(f08), &first, "Fortran '08-specified ASYNCHRONOUS behavior");
|
|
|
|
|
}
|
|
|
|
|
if (!OMPI_FORTRAN_HAVE_PROCEDURE) {
|
|
|
|
|
append(f08, sizeof(f08), &first, "PROCEDUREs");
|
|
|
|
|
}
|
|
|
|
|
if (OMPI_FORTRAN_NEED_WRAPPER_ROUTINES) {
|
|
|
|
|
append(f08, sizeof(f08), &first, "direct passthru (where possible) to underlying Open MPI's C functionality");
|
|
|
|
|
}
|
|
|
|
|
fortran_usempif08_compliance = strdup(f08);
|
|
|
|
|
}
|
|
|
|
|
} else {
|
|
|
|
|
fortran_usempif08_compliance = strdup("The mpi_f08 module was not built");
|
|
|
|
|
}
|
|
|
|
|
|
2012-02-21 02:12:43 +04:00
|
|
|
java = OMPI_WANT_JAVA_BINDINGS ? "yes" : "no";
|
2009-07-01 01:41:28 +04:00
|
|
|
heterogeneous = OPAL_ENABLE_HETEROGENEOUS_SUPPORT ? "yes" : "no";
|
|
|
|
|
memprofile = OPAL_ENABLE_MEM_PROFILE ? "yes" : "no";
|
|
|
|
|
memdebug = OPAL_ENABLE_MEM_DEBUG ? "yes" : "no";
|
|
|
|
|
debug = OPAL_ENABLE_DEBUG ? "yes" : "no";
|
|
|
|
|
mpi_interface_warning = OMPI_WANT_MPI_INTERFACE_WARNING ? "yes" : "no";
|
|
|
|
|
cprofiling = OMPI_ENABLE_MPI_PROFILING ? "yes" : "no";
|
== Highlights ==
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
|
|
|
cxxprofiling = (OMPI_BUILD_CXX_BINDINGS && OMPI_ENABLE_MPI_PROFILING) ? "yes" : "no";
|
|
|
|
|
cxxexceptions = (OMPI_BUILD_CXX_BINDINGS && OMPI_HAVE_CXX_EXCEPTION_SUPPORT) ? "yes" : "no";
|
|
|
|
|
fortran_mpifh_profiling = (OMPI_ENABLE_MPI_PROFILING && OMPI_BUILD_FORTRAN_MPIFH_BINDINGS) ? "yes" : "no";
|
|
|
|
|
fortran_usempi_profiling = (OMPI_ENABLE_MPI_PROFILING && OMPI_BUILD_FORTRAN_USEMPI_BINDINGS) ? "yes" : "no";
|
|
|
|
|
fortran_usempif08_profiling = (OMPI_ENABLE_MPI_PROFILING && OMPI_BUILD_FORTRAN_USEMPIF08_BINDINGS) ? "yes" : "no";
|
2009-07-01 01:41:28 +04:00
|
|
|
want_libltdl = OPAL_WANT_LIBLTDL ? "yes" : "no";
|
|
|
|
|
mpirun_prefix_by_default = ORTE_WANT_ORTERUN_PREFIX_BY_DEFAULT ? "yes" : "no";
|
|
|
|
|
sparse_groups = OMPI_GROUP_SPARSE ? "yes" : "no";
|
|
|
|
|
have_mpi_io = OMPI_PROVIDE_MPI_FILE_INTERFACE ? "yes" : "no";
|
|
|
|
|
wtime_support = OPAL_TIMER_USEC_NATIVE ? "native" : "gettimeofday";
|
|
|
|
|
symbol_visibility = OPAL_C_HAVE_VISIBILITY ? "yes" : "no";
|
2011-09-14 23:22:08 +04:00
|
|
|
topology_support = OPAL_HAVE_HWLOC ? "yes" : "no";
|
2012-01-27 18:11:33 +04:00
|
|
|
vt_support = OMPI_ENABLE_CONTRIB_vt ? "yes" : "no";
|
2009-07-01 01:41:28 +04:00
|
|
|
|
|
|
|
|
/* setup strings that require allocation */
|
== Highlights ==
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
|
|
|
if (OMPI_BUILD_FORTRAN_MPIFH_BINDINGS) {
|
|
|
|
|
asprintf(&fortran_mpifh, "yes (%s)",
|
2009-07-01 01:41:28 +04:00
|
|
|
(OPAL_HAVE_WEAK_SYMBOLS ? "all" :
|
== Highlights ==
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
|
|
|
(OMPI_FORTRAN_CAPS ? "caps" :
|
|
|
|
|
(OMPI_FORTRAN_PLAIN ? "lower case" :
|
|
|
|
|
(OMPI_FORTRAN_SINGLE_UNDERSCORE ? "single underscore" : "double underscore")))));
|
2009-07-01 01:41:28 +04:00
|
|
|
} else {
|
== Highlights ==
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
|
|
|
fortran_mpifh = strdup("no");
|
2009-07-01 01:41:28 +04:00
|
|
|
}
|
== Highlights ==
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
|
|
|
|
|
|
|
|
if (OMPI_FORTRAN_HAVE_IGNORE_TKR) {
|
|
|
|
|
/* OMPI_FORTRAN_IGNORE_TKR_PREDECL is already in quotes; it
|
|
|
|
|
didn't work consistently to put it in _STRINGIFY because
|
|
|
|
|
sometimes the compiler would actually interpret the pragma
|
|
|
|
|
in there before stringify-ing it. */
|
|
|
|
|
asprintf(&fortran_have_ignore_tkr, "yes (%s)",
|
|
|
|
|
OMPI_FORTRAN_IGNORE_TKR_PREDECL);
|
|
|
|
|
} else {
|
|
|
|
|
fortran_have_ignore_tkr = strdup("no");
|
|
|
|
|
}
|
|
|
|
|
|
2011-03-19 00:36:35 +03:00
|
|
|
if (OPAL_HAVE_SOLARIS_THREADS || OPAL_HAVE_POSIX_THREADS) { /* should just test OPAL_HAVE_THREADS */
|
|
|
|
|
asprintf(&threads, "%s (MPI_THREAD_MULTIPLE: %s, progress: %s)", OPAL_HAVE_SOLARIS_THREADS ? "solaris" :
|
|
|
|
|
(OPAL_HAVE_POSIX_THREADS ? "posix" : "type unknown"), /* "type unknown" can presumably never happen */
|
2010-03-17 02:10:50 +03:00
|
|
|
OMPI_ENABLE_THREAD_MULTIPLE ? "yes" : "no",
|
Update libevent to the 2.0 series, currently at 2.0.7rc. We will update to their final release when it becomes available. Currently known errors exist in unused portions of the libevent code. This revision passes the IBM test suite on a Linux machine and on a standalone Mac.
This is a fairly intrusive change, but outside of the moving of opal/event to opal/mca/event, the only changes involved (a) changing all calls to opal_event functions to reflect the new framework instead, and (b) ensuring that all opal_event_t objects are properly constructed since they are now true opal_objects.
Note: Shiqing has just returned from vacation and has not yet had a chance to complete the Windows integration. Thus, this commit almost certainly breaks Windows support on the trunk. However, I want this to have a chance to soak for as long as possible before I become less available a week from today (going to be at a class for 5 days, and thus will only be sparingly available) so we can find and fix any problems.
Biggest change is moving the libevent code from opal/event to a new opal/mca/event framework. This was done to make it much easier to update libevent in the future. New versions can be inserted as a new component and tested in parallel with the current version until validated, then we can remove the earlier version if we so choose. This is a statically built framework ala installdirs, so only one component will build at a time. There is no selection logic - the sole compiled component simply loads its function pointers into the opal_event struct.
I have gone thru the code base and converted all the libevent calls I could find. However, I cannot compile nor test every environment. It is therefore quite likely that errors remain in the system. Please keep an eye open for two things:
1. compile-time errors: these will be obvious as calls to the old functions (e.g., opal_evtimer_new) must be replaced by the new framework APIs (e.g., opal_event.evtimer_new)
2. run-time errors: these will likely show up as segfaults due to missing constructors on opal_event_t objects. It appears that it became a typical practice for people to "init" an opal_event_t by simply using memset to zero it out. This will no longer work - you must either OBJ_NEW or OBJ_CONSTRUCT an opal_event_t. I tried to catch these cases, but may have missed some. Believe me, you'll know when you hit it.
There is also the issue of the new libevent "no recursion" behavior. As I described on a recent email, we will have to discuss this and figure out what, if anything, we need to do.
This commit was SVN r23925.
2010-10-24 22:35:54 +04:00
|
|
|
OMPI_ENABLE_PROGRESS_THREADS ? "yes" : "no");
|
2009-07-01 01:41:28 +04:00
|
|
|
} else {
|
|
|
|
|
threads = strdup("no");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
asprintf(&ft_support, "%s (checkpoint thread: %s)",
|
|
|
|
|
OPAL_ENABLE_FT ? "yes" : "no", OPAL_ENABLE_FT_THREAD ? "yes" : "no");;
|
A number of C/R enhancements per RFC below:
http://www.open-mpi.org/community/lists/devel/2010/07/8240.php
Documentation:
http://osl.iu.edu/research/ft/
Major Changes:
--------------
* Added C/R-enabled Debugging support.
Enabled with the --enable-crdebug flag. See the following website for more information:
http://osl.iu.edu/research/ft/crdebug/
* Added Stable Storage (SStore) framework for checkpoint storage
* 'central' component does a direct to central storage save
* 'stage' component stages checkpoints to central storage while the application continues execution.
* 'stage' supports offline compression of checkpoints before moving (sstore_stage_compress)
* 'stage' supports local caching of checkpoints to improve automatic recovery (sstore_stage_caching)
* Added Compression (compress) framework to support
* Add two new ErrMgr recovery policies
* {{{crmig}}} C/R Process Migration
* {{{autor}}} C/R Automatic Recovery
* Added the {{{ompi-migrate}}} command line tool to support the {{{crmig}}} ErrMgr component
* Added CR MPI Ext functions (enable them with {{{--enable-mpi-ext=cr}}} configure option)
* {{{OMPI_CR_Checkpoint}}} (Fixes trac:2342)
* {{{OMPI_CR_Restart}}}
* {{{OMPI_CR_Migrate}}} (may need some more work for mapping rules)
* {{{OMPI_CR_INC_register_callback}}} (Fixes trac:2192)
* {{{OMPI_CR_Quiesce_start}}}
* {{{OMPI_CR_Quiesce_checkpoint}}}
* {{{OMPI_CR_Quiesce_end}}}
* {{{OMPI_CR_self_register_checkpoint_callback}}}
* {{{OMPI_CR_self_register_restart_callback}}}
* {{{OMPI_CR_self_register_continue_callback}}}
* The ErrMgr predicted_fault() interface has been changed to take an opal_list_t of ErrMgr defined types. This will allow us to better support a wider range of fault prediction services in the future.
* Add a progress meter to:
* FileM rsh (filem_rsh_process_meter)
* SnapC full (snapc_full_progress_meter)
* SStore stage (sstore_stage_progress_meter)
* Added 2 new command line options to ompi-restart
* --showme : Display the full command line that would have been exec'ed.
* --mpirun_opts : Command line options to pass directly to mpirun. (Fixes trac:2413)
* Deprecated some MCA params:
* crs_base_snapshot_dir deprecated, use sstore_stage_local_snapshot_dir
* snapc_base_global_snapshot_dir deprecated, use sstore_base_global_snapshot_dir
* snapc_base_global_shared deprecated, use sstore_stage_global_is_shared
* snapc_base_store_in_place deprecated, replaced with different components of SStore
* snapc_base_global_snapshot_ref deprecated, use sstore_base_global_snapshot_ref
* snapc_base_establish_global_snapshot_dir deprecated, never well supported
* snapc_full_skip_filem deprecated, use sstore_stage_skip_filem
Minor Changes:
--------------
* Fixes trac:1924 : {{{ompi-restart}}} now recognizes path prefixed checkpoint handles and does the right thing.
* Fixes trac:2097 : {{{ompi-info}}} should now report all available CRS components
* Fixes trac:2161 : Manual checkpoint movement. A user can 'mv' a checkpoint directory from the original location to another and still restart from it.
* Fixes trac:2208 : Honor various TMPDIR varaibles instead of forcing {{{/tmp}}}
* Move {{{ompi_cr_continue_like_restart}}} to {{{orte_cr_continue_like_restart}}} to be more flexible in where this should be set.
* opal_crs_base_metadata_write* functions have been moved to SStore to support a wider range of metadata handling functionality.
* Cleanup the CRS framework and components to work with the SStore framework.
* Cleanup the SnapC framework and components to work with the SStore framework (cleans up these code paths considerably).
* Add 'quiesce' hook to CRCP for a future enhancement.
* We now require a BLCR version that supports {{{cr_request_file()}}} or {{{cr_request_checkpoint()}}} in order to make the code more maintainable. Note that {{{cr_request_file}}} has been deprecated since 0.7.0, so we prefer to use {{{cr_request_checkpoint()}}}.
* Add optional application level INC callbacks (registered through the CR MPI Ext interface).
* Increase the {{{opal_cr_thread_sleep_wait}}} parameter to 1000 microseconds to make the C/R thread less aggressive.
* {{{opal-restart}}} now looks for cache directories before falling back on stable storage when asked.
* {{{opal-restart}}} also support local decompression before restarting
* {{{orte-checkpoint}}} now uses the SStore framework to work with the metadata
* {{{orte-restart}}} now uses the SStore framework to work with the metadata
* Remove the {{{orte-restart}}} preload option. This was removed since the user only needs to select the 'stage' component in order to support this functionality.
* Since the '-am' parameter is saved in the metadata, {{{ompi-restart}}} no longer hard codes {{{-am ft-enable-cr}}}.
* Fix {{{hnp}}} ErrMgr so that if a previous component in the stack has 'fixed' the problem, then it should be skipped.
* Make sure to decrement the number of 'num_local_procs' in the orted when one goes away.
* odls now checks the SStore framework to see if it needs to load any checkpoint files before launching (to support 'stage'). This separates the SStore logic from the --preload-[binary|files] options.
* Add unique IDs to the named pipes established between the orted and the app in SnapC. This is to better support migration and automatic recovery activities.
* Improve the checks for 'already checkpointing' error path.
* A a recovery output timer, to show how long it takes to restart a job
* Do a better job of cleaning up the old session directory on restart.
* Add a local module to the autor and crmig ErrMgr components. These small modules prevent the 'orted' component from attempting a local recovery (Which does not work for MPI apps at the moment)
* Add a fix for bounding the checkpointable region between MPI_Init and MPI_Finalize.
This commit was SVN r23587.
The following Trac tickets were found above:
Ticket 1924 --> https://svn.open-mpi.org/trac/ompi/ticket/1924
Ticket 2097 --> https://svn.open-mpi.org/trac/ompi/ticket/2097
Ticket 2161 --> https://svn.open-mpi.org/trac/ompi/ticket/2161
Ticket 2192 --> https://svn.open-mpi.org/trac/ompi/ticket/2192
Ticket 2208 --> https://svn.open-mpi.org/trac/ompi/ticket/2208
Ticket 2342 --> https://svn.open-mpi.org/trac/ompi/ticket/2342
Ticket 2413 --> https://svn.open-mpi.org/trac/ompi/ticket/2413
2010-08-11 00:51:11 +04:00
|
|
|
|
|
|
|
|
asprintf(&crdebug_support, "%s",
|
|
|
|
|
OPAL_ENABLE_CRDEBUG ? "yes" : "no");
|
|
|
|
|
|
2009-07-01 01:41:28 +04:00
|
|
|
/* output values */
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Configured by", "config:user", OPAL_CONFIGURE_USER);
|
|
|
|
|
opal_info_out("Configured on", "config:timestamp", OPAL_CONFIGURE_DATE);
|
|
|
|
|
opal_info_out("Configure host", "config:host", OPAL_CONFIGURE_HOST);
|
2009-07-01 01:41:28 +04:00
|
|
|
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Built by", "build:user", OMPI_BUILD_USER);
|
|
|
|
|
opal_info_out("Built on", "build:timestamp", OMPI_BUILD_DATE);
|
|
|
|
|
opal_info_out("Built host", "build:host", OMPI_BUILD_HOST);
|
2009-07-01 01:41:28 +04:00
|
|
|
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("C bindings", "bindings:c", "yes");
|
|
|
|
|
opal_info_out("C++ bindings", "bindings:cxx", cxx);
|
|
|
|
|
opal_info_out("Fort mpif.h", "bindings:mpif.h", fortran_mpifh);
|
== Highlights ==
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
|
|
|
free(fortran_mpifh);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Fort use mpi", "bindings:use_mpi",
|
== Highlights ==
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
|
|
|
fortran_usempi);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Fort use mpi size", "bindings:use_mpi:size",
|
== Highlights ==
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
|
|
|
ompi_info_deprecated_value);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Fort use mpi_f08", "bindings:use_mpi_f08",
|
== Highlights ==
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
|
|
|
fortran_usempif08);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Fort mpi_f08 compliance", "bindings:use_mpi_f08:compliance",
|
== Highlights ==
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
|
|
|
fortran_usempif08_compliance);
|
|
|
|
|
if (NULL != fortran_usempif08_compliance) {
|
|
|
|
|
free(fortran_usempif08_compliance);
|
|
|
|
|
}
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Fort mpi_f08 subarrays", "bindings:use_mpi_f08:subarrays-supported",
|
== Highlights ==
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
|
|
|
fortran_build_f08_subarrays);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Java bindings", "bindings:java", java);
|
2012-02-21 02:12:43 +04:00
|
|
|
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("C compiler", "compiler:c:command", OPAL_CC);
|
|
|
|
|
opal_info_out("C compiler absolute", "compiler:c:absolute",
|
== Highlights ==
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
|
|
|
OPAL_CC_ABSOLUTE);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("C compiler family name", "compiler:c:familyname",
|
== Highlights ==
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
|
|
|
_STRINGIFY(OPAL_BUILD_PLATFORM_COMPILER_FAMILYNAME));
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("C compiler version", "compiler:c:version",
|
== Highlights ==
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
|
|
|
_STRINGIFY(OPAL_BUILD_PLATFORM_COMPILER_VERSION_STR));
|
2009-07-01 01:41:28 +04:00
|
|
|
|
|
|
|
|
if (want_all) {
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("C char size", "compiler:c:sizeof:char", sizeof(char));
|
2009-08-04 15:54:01 +04:00
|
|
|
/* JMS: should be fixed in MPI-2.2 to differentiate between C
|
|
|
|
|
_Bool and C++ bool. For the moment, the code base assumes
|
|
|
|
|
that they are the same. Because of opal_config_bottom.h,
|
|
|
|
|
we can sizeof(bool) here, so we might as well -- even
|
|
|
|
|
though this technically isn't right. This should be fixed
|
|
|
|
|
when we update to MPI-2.2. See below for note about C++
|
|
|
|
|
bool alignment. */
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("C bool size", "compiler:c:sizeof:bool", sizeof(bool));
|
|
|
|
|
opal_info_out_int("C short size", "compiler:c:sizeof:short", sizeof(short));
|
|
|
|
|
opal_info_out_int("C int size", "compiler:c:sizeof:int", sizeof(int));
|
|
|
|
|
opal_info_out_int("C long size", "compiler:c:sizeof:long", sizeof(long));
|
|
|
|
|
opal_info_out_int("C float size", "compiler:c:sizeof:float", sizeof(float));
|
|
|
|
|
opal_info_out_int("C double size", "compiler:c:sizeof:double", sizeof(double));
|
|
|
|
|
opal_info_out_int("C pointer size", "compiler:c:sizeof:pointer", sizeof(void *));
|
|
|
|
|
opal_info_out_int("C char align", "compiler:c:align:char", OPAL_ALIGNMENT_CHAR);
|
== Highlights ==
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
|
|
|
#if OMPI_BUILD_CXX_BINDINGS
|
2009-08-04 15:54:01 +04:00
|
|
|
/* JMS: See above for note about C++ bool size. We don't have
|
|
|
|
|
the bool alignment the way configure currently runs -- need
|
|
|
|
|
to clean this up when we update for MPI-2.2. */
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("C bool align", "compiler:c:align:bool", OPAL_ALIGNMENT_CXX_BOOL);
|
2009-08-04 15:54:01 +04:00
|
|
|
#else
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("C bool align", "compiler:c:align:bool", "skipped");
|
2009-08-04 15:54:01 +04:00
|
|
|
#endif
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("C int align", "compiler:c:align:int", OPAL_ALIGNMENT_INT);
|
|
|
|
|
opal_info_out_int("C float align", "compiler:c:align:float", OPAL_ALIGNMENT_FLOAT);
|
|
|
|
|
opal_info_out_int("C double align", "compiler:c:align:double", OPAL_ALIGNMENT_DOUBLE);
|
2009-07-01 01:41:28 +04:00
|
|
|
}
|
2009-08-04 15:54:01 +04:00
|
|
|
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("C++ compiler", "compiler:cxx:command", OMPI_CXX);
|
|
|
|
|
opal_info_out("C++ compiler absolute", "compiler:cxx:absolute", OMPI_CXX_ABSOLUTE);
|
|
|
|
|
opal_info_out("Fort compiler", "compiler:fortran:command", OMPI_FC);
|
|
|
|
|
opal_info_out("Fort compiler abs", "compiler:fortran:absolute",
|
== Highlights ==
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
|
|
|
OMPI_FC_ABSOLUTE);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Fort ignore TKR", "compiler:fortran:ignore_tkr",
|
== Highlights ==
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
|
|
|
fortran_have_ignore_tkr);
|
|
|
|
|
free(fortran_have_ignore_tkr);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Fort 08 assumed shape",
|
== Highlights ==
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
|
|
|
"compiler:fortran:f08_assumed_shape",
|
|
|
|
|
fortran_have_f08_assumed_shape);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Fort optional args",
|
== Highlights ==
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
|
|
|
"compiler:fortran:optional_arguments",
|
|
|
|
|
fortran_have_optional_args);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Fort BIND(C)",
|
== Highlights ==
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
|
|
|
"compiler:fortran:bind_c",
|
|
|
|
|
fortran_have_bind_c);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Fort PRIVATE",
|
== Highlights ==
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
|
|
|
"compiler:fortran:private",
|
|
|
|
|
fortran_have_private);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Fort ABSTRACT",
|
== Highlights ==
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
|
|
|
"compiler:fortran:abstract",
|
|
|
|
|
fortran_have_abstract);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Fort ASYNCHRONOUS",
|
== Highlights ==
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
|
|
|
"compiler:fortran:asynchronous",
|
|
|
|
|
fortran_have_asynchronous);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Fort PROCEDURE",
|
== Highlights ==
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
|
|
|
"compiler:fortran:procedure",
|
|
|
|
|
fortran_have_procedure);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Fort f08 using wrappers",
|
== Highlights ==
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
|
|
|
"compiler:fortran:08_wrappers",
|
|
|
|
|
fortran_08_using_wrappers_for_choice_buffer_functions);
|
2009-07-01 01:41:28 +04:00
|
|
|
|
|
|
|
|
if (want_all) {
|
|
|
|
|
|
|
|
|
|
/* Will always have the size of Fortran integer */
|
|
|
|
|
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("Fort integer size", "compiler:fortran:sizeof:integer",
|
2009-07-01 01:41:28 +04:00
|
|
|
OMPI_SIZEOF_FORTRAN_INTEGER);
|
|
|
|
|
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("Fort logical size", "compiler:fortran:sizeof:logical",
|
2009-07-01 01:41:28 +04:00
|
|
|
OMPI_SIZEOF_FORTRAN_LOGICAL);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("Fort logical value true", "compiler:fortran:value:true",
|
2009-07-01 01:41:28 +04:00
|
|
|
OMPI_FORTRAN_VALUE_TRUE);
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/* May or may not have the other Fortran sizes */
|
|
|
|
|
|
== Highlights ==
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
|
|
|
if (OMPI_BUILD_FORTRAN_MPIFH_BINDINGS ||
|
|
|
|
|
OMPI_BUILD_FORTRAN_USEMPI_BINDINGS ||
|
|
|
|
|
OMPI_BUILD_FORTRAN_USEMPIF08_BINDINGS) {
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Fort have integer1", "compiler:fortran:have:integer1",
|
2009-07-01 01:41:28 +04:00
|
|
|
OMPI_HAVE_FORTRAN_INTEGER1 ? "yes" : "no");
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Fort have integer2", "compiler:fortran:have:integer2",
|
2009-07-01 01:41:28 +04:00
|
|
|
OMPI_HAVE_FORTRAN_INTEGER2 ? "yes" : "no");
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Fort have integer4", "compiler:fortran:have:integer4",
|
2009-07-01 01:41:28 +04:00
|
|
|
OMPI_HAVE_FORTRAN_INTEGER4 ? "yes" : "no");
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Fort have integer8", "compiler:fortran:have:integer8",
|
2009-07-01 01:41:28 +04:00
|
|
|
OMPI_HAVE_FORTRAN_INTEGER8 ? "yes" : "no");
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Fort have integer16", "compiler:fortran:have:integer16",
|
2009-07-01 01:41:28 +04:00
|
|
|
OMPI_HAVE_FORTRAN_INTEGER16 ? "yes" : "no");
|
|
|
|
|
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Fort have real4", "compiler:fortran:have:real4",
|
2009-07-01 01:41:28 +04:00
|
|
|
OMPI_HAVE_FORTRAN_REAL4 ? "yes" : "no");
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Fort have real8", "compiler:fortran:have:real8",
|
2009-07-01 01:41:28 +04:00
|
|
|
OMPI_HAVE_FORTRAN_REAL8 ? "yes" : "no");
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Fort have real16", "compiler:fortran:have:real16",
|
2009-07-01 01:41:28 +04:00
|
|
|
OMPI_HAVE_FORTRAN_REAL16 && OMPI_REAL16_MATCHES_C ? "yes" : "no");
|
|
|
|
|
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Fort have complex8", "compiler:fortran:have:complex8",
|
2009-07-01 01:41:28 +04:00
|
|
|
OMPI_HAVE_FORTRAN_COMPLEX8 ? "yes" : "no");
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Fort have complex16", "compiler:fortran:have:complex16",
|
2009-07-01 01:41:28 +04:00
|
|
|
OMPI_HAVE_FORTRAN_COMPLEX16 ? "yes" : "no");
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Fort have complex32", "compiler:fortran:have:complex32",
|
2009-07-01 01:41:28 +04:00
|
|
|
OMPI_HAVE_FORTRAN_COMPLEX32 && OMPI_REAL16_MATCHES_C ? "yes" : "no");
|
|
|
|
|
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("Fort integer1 size", "compiler:fortran:sizeof:integer1",
|
2009-07-01 01:41:28 +04:00
|
|
|
OMPI_HAVE_FORTRAN_INTEGER1 ? OMPI_SIZEOF_FORTRAN_INTEGER1 : -1);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("Fort integer2 size", "compiler:fortran:sizeof:integer2",
|
2009-07-01 01:41:28 +04:00
|
|
|
OMPI_HAVE_FORTRAN_INTEGER2 ? OMPI_SIZEOF_FORTRAN_INTEGER2 : -1);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("Fort integer4 size", "compiler:fortran:sizeof:integer4",
|
2009-07-01 01:41:28 +04:00
|
|
|
OMPI_HAVE_FORTRAN_INTEGER4 ? OMPI_SIZEOF_FORTRAN_INTEGER4 : -1);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("Fort integer8 size", "compiler:fortran:sizeof:integer8",
|
2009-07-01 01:41:28 +04:00
|
|
|
OMPI_HAVE_FORTRAN_INTEGER8 ? OMPI_SIZEOF_FORTRAN_INTEGER8 : -1);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("Fort integer16 size", "compiler:fortran:sizeof:integer16",
|
2009-07-01 01:41:28 +04:00
|
|
|
OMPI_HAVE_FORTRAN_INTEGER16 ? OMPI_SIZEOF_FORTRAN_INTEGER16 : -1);
|
|
|
|
|
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("Fort real size", "compiler:fortran:sizeof:real",
|
2009-07-01 01:41:28 +04:00
|
|
|
OMPI_SIZEOF_FORTRAN_REAL);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("Fort real4 size", "compiler:fortran:sizeof:real4",
|
2009-07-01 01:41:28 +04:00
|
|
|
OMPI_HAVE_FORTRAN_REAL4 ? OMPI_SIZEOF_FORTRAN_REAL4 : -1);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("Fort real8 size", "compiler:fortran:sizeof:real8",
|
2009-07-01 01:41:28 +04:00
|
|
|
OMPI_HAVE_FORTRAN_REAL8 ? OMPI_SIZEOF_FORTRAN_REAL8 : -1);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("Fort real16 size", "compiler:fortran:sizeof:real17",
|
2009-07-01 01:41:28 +04:00
|
|
|
OMPI_HAVE_FORTRAN_REAL16 ? OMPI_SIZEOF_FORTRAN_REAL16 : -1);
|
|
|
|
|
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("Fort dbl prec size",
|
2009-07-01 01:41:28 +04:00
|
|
|
"compiler:fortran:sizeof:double_precision",
|
2010-08-09 20:56:32 +04:00
|
|
|
OMPI_SIZEOF_FORTRAN_DOUBLE_PRECISION);
|
2009-07-01 01:41:28 +04:00
|
|
|
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("Fort cplx size", "compiler:fortran:sizeof:complex",
|
2010-08-09 20:56:32 +04:00
|
|
|
OMPI_SIZEOF_FORTRAN_COMPLEX);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("Fort dbl cplx size",
|
2009-07-01 01:41:28 +04:00
|
|
|
"compiler:fortran:sizeof:double_complex",
|
2010-08-11 00:33:50 +04:00
|
|
|
OMPI_HAVE_FORTRAN_DOUBLE_COMPLEX ? OMPI_SIZEOF_FORTRAN_DOUBLE_COMPLEX : -1);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("Fort cplx8 size", "compiler:fortran:sizeof:complex8",
|
2009-07-01 01:41:28 +04:00
|
|
|
OMPI_HAVE_FORTRAN_COMPLEX8 ? OMPI_SIZEOF_FORTRAN_COMPLEX8 : -1);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("Fort cplx16 size", "compiler:fortran:sizeof:complex16",
|
2009-07-01 01:41:28 +04:00
|
|
|
OMPI_HAVE_FORTRAN_COMPLEX16 ? OMPI_SIZEOF_FORTRAN_COMPLEX16 : -1);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("Fort cplx32 size", "compiler:fortran:sizeof:complex32",
|
2009-07-01 01:41:28 +04:00
|
|
|
OMPI_HAVE_FORTRAN_COMPLEX32 ? OMPI_SIZEOF_FORTRAN_COMPLEX32 : -1);
|
|
|
|
|
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("Fort integer align", "compiler:fortran:align:integer",
|
2009-07-01 01:41:28 +04:00
|
|
|
OMPI_ALIGNMENT_FORTRAN_INTEGER);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("Fort integer1 align", "compiler:fortran:align:integer1",
|
2009-07-01 01:41:28 +04:00
|
|
|
OMPI_HAVE_FORTRAN_INTEGER1 ? OMPI_ALIGNMENT_FORTRAN_INTEGER1 : -1);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("Fort integer2 align", "compiler:fortran:align:integer2",
|
2009-07-01 01:41:28 +04:00
|
|
|
OMPI_HAVE_FORTRAN_INTEGER2 ? OMPI_ALIGNMENT_FORTRAN_INTEGER2 : -1);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("Fort integer4 align", "compiler:fortran:align:integer4",
|
2009-07-01 01:41:28 +04:00
|
|
|
OMPI_HAVE_FORTRAN_INTEGER4 ? OMPI_ALIGNMENT_FORTRAN_INTEGER4 : -1);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("Fort integer8 align", "compiler:fortran:align:integer8",
|
2009-07-01 01:41:28 +04:00
|
|
|
OMPI_HAVE_FORTRAN_INTEGER8 ? OMPI_ALIGNMENT_FORTRAN_INTEGER8 : -1);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("Fort integer16 align", "compiler:fortran:align:integer16",
|
2009-07-01 01:41:28 +04:00
|
|
|
OMPI_HAVE_FORTRAN_INTEGER16 ? OMPI_ALIGNMENT_FORTRAN_INTEGER16 : -1);
|
|
|
|
|
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("Fort real align", "compiler:fortran:align:real",
|
2009-07-01 01:41:28 +04:00
|
|
|
OMPI_ALIGNMENT_FORTRAN_REAL);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("Fort real4 align", "compiler:fortran:align:real4",
|
2009-07-01 01:41:28 +04:00
|
|
|
OMPI_HAVE_FORTRAN_REAL4 ? OMPI_ALIGNMENT_FORTRAN_REAL4 : -1);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("Fort real8 align", "compiler:fortran:align:real8",
|
2009-07-01 01:41:28 +04:00
|
|
|
OMPI_HAVE_FORTRAN_REAL8 ? OMPI_ALIGNMENT_FORTRAN_REAL8 : -1);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("Fort real16 align", "compiler:fortran:align:real16",
|
2009-07-01 01:41:28 +04:00
|
|
|
OMPI_HAVE_FORTRAN_REAL16 ? OMPI_ALIGNMENT_FORTRAN_REAL16 : -1);
|
|
|
|
|
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("Fort dbl prec align",
|
2009-07-01 01:41:28 +04:00
|
|
|
"compiler:fortran:align:double_precision",
|
2010-08-09 20:56:32 +04:00
|
|
|
OMPI_ALIGNMENT_FORTRAN_DOUBLE_PRECISION);
|
2009-07-01 01:41:28 +04:00
|
|
|
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("Fort cplx align", "compiler:fortran:align:complex",
|
2010-08-09 20:56:32 +04:00
|
|
|
OMPI_ALIGNMENT_FORTRAN_COMPLEX);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("Fort dbl cplx align",
|
2009-07-01 01:41:28 +04:00
|
|
|
"compiler:fortran:align:double_complex",
|
2010-08-11 00:33:50 +04:00
|
|
|
OMPI_HAVE_FORTRAN_DOUBLE_COMPLEX ? OMPI_ALIGNMENT_FORTRAN_DOUBLE_COMPLEX : -1);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("Fort cplx8 align", "compiler:fortran:align:complex8",
|
2009-07-01 01:41:28 +04:00
|
|
|
OMPI_HAVE_FORTRAN_COMPLEX8 ? OMPI_ALIGNMENT_FORTRAN_COMPLEX8 : -1);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("Fort cplx16 align", "compiler:fortran:align:complex16",
|
2009-07-01 01:41:28 +04:00
|
|
|
OMPI_HAVE_FORTRAN_COMPLEX16 ? OMPI_ALIGNMENT_FORTRAN_COMPLEX16 : -1);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("Fort cplx32 align", "compiler:fortran:align:complex32",
|
2009-07-01 01:41:28 +04:00
|
|
|
OMPI_HAVE_FORTRAN_COMPLEX32 ? OMPI_ALIGNMENT_FORTRAN_COMPLEX32 : -1);
|
|
|
|
|
|
|
|
|
|
} else {
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Fort real size", "compiler:fortran:sizeof:real", "skipped");
|
|
|
|
|
opal_info_out("Fort dbl prec size",
|
2009-07-01 01:41:28 +04:00
|
|
|
"compiler:fortran:sizeof:double_precision", "skipped");
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Fort cplx size", "compiler:fortran:sizeof:complex", "skipped");
|
|
|
|
|
opal_info_out("Fort dbl cplx size",
|
2009-07-01 01:41:28 +04:00
|
|
|
"compiler:fortran:sizeof:double_complex", "skipped");
|
|
|
|
|
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Fort integer align", "compiler:fortran:align:integer", "skipped");
|
|
|
|
|
opal_info_out("Fort real align", "compiler:fortran:align:real", "skipped");
|
|
|
|
|
opal_info_out("Fort dbl prec align",
|
2009-07-01 01:41:28 +04:00
|
|
|
"compiler:fortran:align:double_precision","skipped");
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Fort cplx align", "compiler:fortran:align:complex", "skipped");
|
|
|
|
|
opal_info_out("Fort dbl cplx align",
|
2009-07-01 01:41:28 +04:00
|
|
|
"compiler:fortran:align:double_complex", "skipped");
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("C profiling", "option:profiling:c", cprofiling);
|
|
|
|
|
opal_info_out("C++ profiling", "option:profiling:cxx", cxxprofiling);
|
|
|
|
|
opal_info_out("Fort mpif.h profiling", "option:profiling:mpif.h",
|
== Highlights ==
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
|
|
|
fortran_mpifh_profiling);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Fort use mpi profiling", "option:profiling:use_mpi",
|
== Highlights ==
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
|
|
|
fortran_usempi_profiling);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Fort use mpi_f08 prof",
|
== Highlights ==
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
|
|
|
"option:profiling:use_mpi_f08",
|
|
|
|
|
fortran_usempif08_profiling);
|
2009-07-01 01:41:28 +04:00
|
|
|
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("C++ exceptions", "option:cxx_exceptions", cxxexceptions);
|
|
|
|
|
opal_info_out("Thread support", "option:threads", threads);
|
2009-07-01 01:41:28 +04:00
|
|
|
free(threads);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Sparse Groups", "option:sparse:groups", sparse_groups);
|
2009-07-01 01:41:28 +04:00
|
|
|
|
|
|
|
|
if (want_all) {
|
|
|
|
|
|
|
|
|
|
/* Don't display the build CPPFLAGS or CXXCPPFLAGS because they're
|
|
|
|
|
* just -I$(top_srcdir)/include, etc. Hence, they're a) boring,
|
|
|
|
|
* and c) specific for ompi_info.
|
|
|
|
|
*/
|
|
|
|
|
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Build CFLAGS", "option:build:cflags", OMPI_BUILD_CFLAGS);
|
|
|
|
|
opal_info_out("Build CXXFLAGS", "option:build:cxxflags", OMPI_BUILD_CXXFLAGS);
|
|
|
|
|
opal_info_out("Build FCFLAGS", "option:build:fcflags", OMPI_BUILD_FCFLAGS);
|
|
|
|
|
opal_info_out("Build LDFLAGS", "option:build:ldflags", OMPI_BUILD_LDFLAGS);
|
|
|
|
|
opal_info_out("Build LIBS", "option:build:libs", OMPI_BUILD_LIBS);
|
2009-07-01 01:41:28 +04:00
|
|
|
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Wrapper extra CFLAGS", "option:wrapper:extra_cflags",
|
2009-07-01 01:41:28 +04:00
|
|
|
WRAPPER_EXTRA_CFLAGS);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Wrapper extra CXXFLAGS", "option:wrapper:extra_cxxflags",
|
2009-07-01 01:41:28 +04:00
|
|
|
WRAPPER_EXTRA_CXXFLAGS);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Wrapper extra FCFLAGS", "option:wrapper:extra_fcflags",
|
2009-07-01 01:41:28 +04:00
|
|
|
WRAPPER_EXTRA_FCFLAGS);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Wrapper extra LDFLAGS", "option:wrapper:extra_ldflags",
|
2009-07-01 01:41:28 +04:00
|
|
|
WRAPPER_EXTRA_LDFLAGS);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Wrapper extra LIBS", "option:wrapper:extra_libs",
|
2009-07-01 01:41:28 +04:00
|
|
|
WRAPPER_EXTRA_LIBS);
|
|
|
|
|
}
|
|
|
|
|
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("Internal debug support", "option:debug", debug);
|
|
|
|
|
opal_info_out("MPI interface warnings", "option:mpi-interface-warning", mpi_interface_warning);
|
|
|
|
|
opal_info_out("MPI parameter check", "option:mpi-param-check", paramcheck);
|
|
|
|
|
opal_info_out("Memory profiling support", "option:mem-profile", memprofile);
|
|
|
|
|
opal_info_out("Memory debugging support", "option:mem-debug", memdebug);
|
|
|
|
|
opal_info_out("libltdl support", "option:dlopen", want_libltdl);
|
|
|
|
|
opal_info_out("Heterogeneous support", "options:heterogeneous", heterogeneous);
|
|
|
|
|
opal_info_out("mpirun default --prefix", "mpirun:prefix_by_default",
|
2009-07-01 01:41:28 +04:00
|
|
|
mpirun_prefix_by_default);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("MPI I/O support", "options:mpi-io", have_mpi_io);
|
|
|
|
|
opal_info_out("MPI_WTIME support", "options:mpi-wtime", wtime_support);
|
|
|
|
|
opal_info_out("Symbol vis. support", "options:visibility", symbol_visibility);
|
|
|
|
|
opal_info_out("Host topology support", "options:host-topology",
|
2011-09-14 23:22:08 +04:00
|
|
|
topology_support);
|
2009-07-01 01:41:28 +04:00
|
|
|
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("MPI extensions", "options:mpi_ext", OMPI_MPIEXT_COMPONENTS);
|
2009-07-01 01:41:28 +04:00
|
|
|
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("FT Checkpoint support", "options:ft_support", ft_support);
|
2009-07-01 01:41:28 +04:00
|
|
|
free(ft_support);
|
A number of C/R enhancements per RFC below:
http://www.open-mpi.org/community/lists/devel/2010/07/8240.php
Documentation:
http://osl.iu.edu/research/ft/
Major Changes:
--------------
* Added C/R-enabled Debugging support.
Enabled with the --enable-crdebug flag. See the following website for more information:
http://osl.iu.edu/research/ft/crdebug/
* Added Stable Storage (SStore) framework for checkpoint storage
* 'central' component does a direct to central storage save
* 'stage' component stages checkpoints to central storage while the application continues execution.
* 'stage' supports offline compression of checkpoints before moving (sstore_stage_compress)
* 'stage' supports local caching of checkpoints to improve automatic recovery (sstore_stage_caching)
* Added Compression (compress) framework to support
* Add two new ErrMgr recovery policies
* {{{crmig}}} C/R Process Migration
* {{{autor}}} C/R Automatic Recovery
* Added the {{{ompi-migrate}}} command line tool to support the {{{crmig}}} ErrMgr component
* Added CR MPI Ext functions (enable them with {{{--enable-mpi-ext=cr}}} configure option)
* {{{OMPI_CR_Checkpoint}}} (Fixes trac:2342)
* {{{OMPI_CR_Restart}}}
* {{{OMPI_CR_Migrate}}} (may need some more work for mapping rules)
* {{{OMPI_CR_INC_register_callback}}} (Fixes trac:2192)
* {{{OMPI_CR_Quiesce_start}}}
* {{{OMPI_CR_Quiesce_checkpoint}}}
* {{{OMPI_CR_Quiesce_end}}}
* {{{OMPI_CR_self_register_checkpoint_callback}}}
* {{{OMPI_CR_self_register_restart_callback}}}
* {{{OMPI_CR_self_register_continue_callback}}}
* The ErrMgr predicted_fault() interface has been changed to take an opal_list_t of ErrMgr defined types. This will allow us to better support a wider range of fault prediction services in the future.
* Add a progress meter to:
* FileM rsh (filem_rsh_process_meter)
* SnapC full (snapc_full_progress_meter)
* SStore stage (sstore_stage_progress_meter)
* Added 2 new command line options to ompi-restart
* --showme : Display the full command line that would have been exec'ed.
* --mpirun_opts : Command line options to pass directly to mpirun. (Fixes trac:2413)
* Deprecated some MCA params:
* crs_base_snapshot_dir deprecated, use sstore_stage_local_snapshot_dir
* snapc_base_global_snapshot_dir deprecated, use sstore_base_global_snapshot_dir
* snapc_base_global_shared deprecated, use sstore_stage_global_is_shared
* snapc_base_store_in_place deprecated, replaced with different components of SStore
* snapc_base_global_snapshot_ref deprecated, use sstore_base_global_snapshot_ref
* snapc_base_establish_global_snapshot_dir deprecated, never well supported
* snapc_full_skip_filem deprecated, use sstore_stage_skip_filem
Minor Changes:
--------------
* Fixes trac:1924 : {{{ompi-restart}}} now recognizes path prefixed checkpoint handles and does the right thing.
* Fixes trac:2097 : {{{ompi-info}}} should now report all available CRS components
* Fixes trac:2161 : Manual checkpoint movement. A user can 'mv' a checkpoint directory from the original location to another and still restart from it.
* Fixes trac:2208 : Honor various TMPDIR varaibles instead of forcing {{{/tmp}}}
* Move {{{ompi_cr_continue_like_restart}}} to {{{orte_cr_continue_like_restart}}} to be more flexible in where this should be set.
* opal_crs_base_metadata_write* functions have been moved to SStore to support a wider range of metadata handling functionality.
* Cleanup the CRS framework and components to work with the SStore framework.
* Cleanup the SnapC framework and components to work with the SStore framework (cleans up these code paths considerably).
* Add 'quiesce' hook to CRCP for a future enhancement.
* We now require a BLCR version that supports {{{cr_request_file()}}} or {{{cr_request_checkpoint()}}} in order to make the code more maintainable. Note that {{{cr_request_file}}} has been deprecated since 0.7.0, so we prefer to use {{{cr_request_checkpoint()}}}.
* Add optional application level INC callbacks (registered through the CR MPI Ext interface).
* Increase the {{{opal_cr_thread_sleep_wait}}} parameter to 1000 microseconds to make the C/R thread less aggressive.
* {{{opal-restart}}} now looks for cache directories before falling back on stable storage when asked.
* {{{opal-restart}}} also support local decompression before restarting
* {{{orte-checkpoint}}} now uses the SStore framework to work with the metadata
* {{{orte-restart}}} now uses the SStore framework to work with the metadata
* Remove the {{{orte-restart}}} preload option. This was removed since the user only needs to select the 'stage' component in order to support this functionality.
* Since the '-am' parameter is saved in the metadata, {{{ompi-restart}}} no longer hard codes {{{-am ft-enable-cr}}}.
* Fix {{{hnp}}} ErrMgr so that if a previous component in the stack has 'fixed' the problem, then it should be skipped.
* Make sure to decrement the number of 'num_local_procs' in the orted when one goes away.
* odls now checks the SStore framework to see if it needs to load any checkpoint files before launching (to support 'stage'). This separates the SStore logic from the --preload-[binary|files] options.
* Add unique IDs to the named pipes established between the orted and the app in SnapC. This is to better support migration and automatic recovery activities.
* Improve the checks for 'already checkpointing' error path.
* A a recovery output timer, to show how long it takes to restart a job
* Do a better job of cleaning up the old session directory on restart.
* Add a local module to the autor and crmig ErrMgr components. These small modules prevent the 'orted' component from attempting a local recovery (Which does not work for MPI apps at the moment)
* Add a fix for bounding the checkpointable region between MPI_Init and MPI_Finalize.
This commit was SVN r23587.
The following Trac tickets were found above:
Ticket 1924 --> https://svn.open-mpi.org/trac/ompi/ticket/1924
Ticket 2097 --> https://svn.open-mpi.org/trac/ompi/ticket/2097
Ticket 2161 --> https://svn.open-mpi.org/trac/ompi/ticket/2161
Ticket 2192 --> https://svn.open-mpi.org/trac/ompi/ticket/2192
Ticket 2208 --> https://svn.open-mpi.org/trac/ompi/ticket/2208
Ticket 2342 --> https://svn.open-mpi.org/trac/ompi/ticket/2342
Ticket 2413 --> https://svn.open-mpi.org/trac/ompi/ticket/2413
2010-08-11 00:51:11 +04:00
|
|
|
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("C/R Enabled Debugging", "options:crdebug_support", crdebug_support);
|
A number of C/R enhancements per RFC below:
http://www.open-mpi.org/community/lists/devel/2010/07/8240.php
Documentation:
http://osl.iu.edu/research/ft/
Major Changes:
--------------
* Added C/R-enabled Debugging support.
Enabled with the --enable-crdebug flag. See the following website for more information:
http://osl.iu.edu/research/ft/crdebug/
* Added Stable Storage (SStore) framework for checkpoint storage
* 'central' component does a direct to central storage save
* 'stage' component stages checkpoints to central storage while the application continues execution.
* 'stage' supports offline compression of checkpoints before moving (sstore_stage_compress)
* 'stage' supports local caching of checkpoints to improve automatic recovery (sstore_stage_caching)
* Added Compression (compress) framework to support
* Add two new ErrMgr recovery policies
* {{{crmig}}} C/R Process Migration
* {{{autor}}} C/R Automatic Recovery
* Added the {{{ompi-migrate}}} command line tool to support the {{{crmig}}} ErrMgr component
* Added CR MPI Ext functions (enable them with {{{--enable-mpi-ext=cr}}} configure option)
* {{{OMPI_CR_Checkpoint}}} (Fixes trac:2342)
* {{{OMPI_CR_Restart}}}
* {{{OMPI_CR_Migrate}}} (may need some more work for mapping rules)
* {{{OMPI_CR_INC_register_callback}}} (Fixes trac:2192)
* {{{OMPI_CR_Quiesce_start}}}
* {{{OMPI_CR_Quiesce_checkpoint}}}
* {{{OMPI_CR_Quiesce_end}}}
* {{{OMPI_CR_self_register_checkpoint_callback}}}
* {{{OMPI_CR_self_register_restart_callback}}}
* {{{OMPI_CR_self_register_continue_callback}}}
* The ErrMgr predicted_fault() interface has been changed to take an opal_list_t of ErrMgr defined types. This will allow us to better support a wider range of fault prediction services in the future.
* Add a progress meter to:
* FileM rsh (filem_rsh_process_meter)
* SnapC full (snapc_full_progress_meter)
* SStore stage (sstore_stage_progress_meter)
* Added 2 new command line options to ompi-restart
* --showme : Display the full command line that would have been exec'ed.
* --mpirun_opts : Command line options to pass directly to mpirun. (Fixes trac:2413)
* Deprecated some MCA params:
* crs_base_snapshot_dir deprecated, use sstore_stage_local_snapshot_dir
* snapc_base_global_snapshot_dir deprecated, use sstore_base_global_snapshot_dir
* snapc_base_global_shared deprecated, use sstore_stage_global_is_shared
* snapc_base_store_in_place deprecated, replaced with different components of SStore
* snapc_base_global_snapshot_ref deprecated, use sstore_base_global_snapshot_ref
* snapc_base_establish_global_snapshot_dir deprecated, never well supported
* snapc_full_skip_filem deprecated, use sstore_stage_skip_filem
Minor Changes:
--------------
* Fixes trac:1924 : {{{ompi-restart}}} now recognizes path prefixed checkpoint handles and does the right thing.
* Fixes trac:2097 : {{{ompi-info}}} should now report all available CRS components
* Fixes trac:2161 : Manual checkpoint movement. A user can 'mv' a checkpoint directory from the original location to another and still restart from it.
* Fixes trac:2208 : Honor various TMPDIR varaibles instead of forcing {{{/tmp}}}
* Move {{{ompi_cr_continue_like_restart}}} to {{{orte_cr_continue_like_restart}}} to be more flexible in where this should be set.
* opal_crs_base_metadata_write* functions have been moved to SStore to support a wider range of metadata handling functionality.
* Cleanup the CRS framework and components to work with the SStore framework.
* Cleanup the SnapC framework and components to work with the SStore framework (cleans up these code paths considerably).
* Add 'quiesce' hook to CRCP for a future enhancement.
* We now require a BLCR version that supports {{{cr_request_file()}}} or {{{cr_request_checkpoint()}}} in order to make the code more maintainable. Note that {{{cr_request_file}}} has been deprecated since 0.7.0, so we prefer to use {{{cr_request_checkpoint()}}}.
* Add optional application level INC callbacks (registered through the CR MPI Ext interface).
* Increase the {{{opal_cr_thread_sleep_wait}}} parameter to 1000 microseconds to make the C/R thread less aggressive.
* {{{opal-restart}}} now looks for cache directories before falling back on stable storage when asked.
* {{{opal-restart}}} also support local decompression before restarting
* {{{orte-checkpoint}}} now uses the SStore framework to work with the metadata
* {{{orte-restart}}} now uses the SStore framework to work with the metadata
* Remove the {{{orte-restart}}} preload option. This was removed since the user only needs to select the 'stage' component in order to support this functionality.
* Since the '-am' parameter is saved in the metadata, {{{ompi-restart}}} no longer hard codes {{{-am ft-enable-cr}}}.
* Fix {{{hnp}}} ErrMgr so that if a previous component in the stack has 'fixed' the problem, then it should be skipped.
* Make sure to decrement the number of 'num_local_procs' in the orted when one goes away.
* odls now checks the SStore framework to see if it needs to load any checkpoint files before launching (to support 'stage'). This separates the SStore logic from the --preload-[binary|files] options.
* Add unique IDs to the named pipes established between the orted and the app in SnapC. This is to better support migration and automatic recovery activities.
* Improve the checks for 'already checkpointing' error path.
* A a recovery output timer, to show how long it takes to restart a job
* Do a better job of cleaning up the old session directory on restart.
* Add a local module to the autor and crmig ErrMgr components. These small modules prevent the 'orted' component from attempting a local recovery (Which does not work for MPI apps at the moment)
* Add a fix for bounding the checkpointable region between MPI_Init and MPI_Finalize.
This commit was SVN r23587.
The following Trac tickets were found above:
Ticket 1924 --> https://svn.open-mpi.org/trac/ompi/ticket/1924
Ticket 2097 --> https://svn.open-mpi.org/trac/ompi/ticket/2097
Ticket 2161 --> https://svn.open-mpi.org/trac/ompi/ticket/2161
Ticket 2192 --> https://svn.open-mpi.org/trac/ompi/ticket/2192
Ticket 2208 --> https://svn.open-mpi.org/trac/ompi/ticket/2208
Ticket 2342 --> https://svn.open-mpi.org/trac/ompi/ticket/2342
Ticket 2413 --> https://svn.open-mpi.org/trac/ompi/ticket/2413
2010-08-11 00:51:11 +04:00
|
|
|
free(crdebug_support);
|
|
|
|
|
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("VampirTrace support", "options:vt", vt_support);
|
2012-01-27 18:11:33 +04:00
|
|
|
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("MPI_MAX_PROCESSOR_NAME", "options:mpi-max-processor-name",
|
2009-07-01 01:41:28 +04:00
|
|
|
MPI_MAX_PROCESSOR_NAME);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("MPI_MAX_ERROR_STRING", "options:mpi-max-error-string",
|
2009-07-01 01:41:28 +04:00
|
|
|
MPI_MAX_ERROR_STRING);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("MPI_MAX_OBJECT_NAME", "options:mpi-max-object-name",
|
2009-07-01 01:41:28 +04:00
|
|
|
MPI_MAX_OBJECT_NAME);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("MPI_MAX_INFO_KEY", "options:mpi-max-info-key",
|
2009-07-01 01:41:28 +04:00
|
|
|
MPI_MAX_INFO_KEY);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("MPI_MAX_INFO_VAL", "options:mpi-max-info-val",
|
2009-07-01 01:41:28 +04:00
|
|
|
MPI_MAX_INFO_VAL);
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("MPI_MAX_PORT_NAME", "options:mpi-max-port-name",
|
2009-07-01 01:41:28 +04:00
|
|
|
MPI_MAX_PORT_NAME);
|
|
|
|
|
#if OMPI_PROVIDE_MPI_FILE_INTERFACE
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out_int("MPI_MAX_DATAREP_STRING", "options:mpi-max-datarep-string",
|
2009-07-07 19:28:34 +04:00
|
|
|
MPI_MAX_DATAREP_STRING);
|
2009-07-01 01:41:28 +04:00
|
|
|
#else
|
2012-06-28 22:23:34 +04:00
|
|
|
opal_info_out("MPI_MAX_DATAREP_STRING", "options:mpi-max-datarep-string",
|
2009-07-07 19:28:34 +04:00
|
|
|
"IO interface not provided");
|
2009-07-01 01:41:28 +04:00
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
}
|