1
1
openmpi/opal/mca/rcache/base/rcache_base_mem_cb.h

39 строки
1.2 KiB
C
Исходник Обычный вид История

opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
/* -*- Mode: C; c-basic-offset:4 ; indent-tabs-mode:nil -*- */
/*
* Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
* University Research and Technology
* Corporation. All rights reserved.
* Copyright (c) 2004-2005 The University of Tennessee and The University
* of Tennessee Research Foundation. All rights
* reserved.
2015-06-24 06:59:57 +03:00
* Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
* University of Stuttgart. All rights reserved.
* Copyright (c) 2004-2005 The Regents of the University of California.
* All rights reserved.
opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
* Copyright (c) 2015 Los Alamos National Security, LLC. All rights
* reserved.
* $COPYRIGHT$
2015-06-24 06:59:57 +03:00
*
* Additional copyrights may follow
2015-06-24 06:59:57 +03:00
*
* $HEADER$
*/
/**
* @file
*/
opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
#ifndef MCA_RCACHE_BASE_MEM_CB_H
#define MCA_RCACHE_BASE_MEM_CB_H
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
#include "opal_config.h"
- Replace combinations of #if defined (c_plusplus) defined (__cplusplus) followed by extern "C" { and the closing counterpart by BEGIN_C_DECLS and END_C_DECLS. Notable exceptions are: - opal/include/opal_config_bottom.h: This is our generated code, that itself defines BEGIN_C_DECL and END_C_DECL - ompi/mpi/cxx/mpicxx.h: Here we do not include opal_config_bottom.h: - Belongs to external code: opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.c opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.h - opal/include/opal/prefetch.h: Has C++ specific macros that are protected: - Had #if ... } #endif _and_ END_C_DECLS (aka end up with 2x END_C_DECLS) ompi/mca/btl/openib/btl_openib.h - opal/event/event.h has #ifdef __cplusplus as BEGIN_C_DECLS... - opal/win32/ompi_process.h: had extern "C"\n {... opal/win32/ompi_process.h: dito - ompi/mca/btl/pcie/btl_pcie_lex.l: needed to add *_C_DECLS ompi/mpi/f90/test/align_c.c: dito - ompi/debuggers/msgq_interface.h: used #ifdef __cplusplus - ompi/mpi/f90/xml/common-C.xsl: Amend Tested on linux using --with-openib and --with-mx The following do not contain either opal_config.h, orte_config.h or ompi_config.h (but possibly other header files, that include one of the above): ompi/mca/bml/r2/bml_r2_ft.h ompi/mca/btl/gm/btl_gm_endpoint.h ompi/mca/btl/gm/btl_gm_proc.h ompi/mca/btl/mx/btl_mx_endpoint.h ompi/mca/btl/ofud/btl_ofud_endpoint.h ompi/mca/btl/ofud/btl_ofud_frag.h ompi/mca/btl/ofud/btl_ofud_proc.h ompi/mca/btl/openib/btl_openib_mca.h ompi/mca/btl/portals/btl_portals_endpoint.h ompi/mca/btl/portals/btl_portals_frag.h ompi/mca/btl/sctp/btl_sctp_endpoint.h ompi/mca/btl/sctp/btl_sctp_proc.h ompi/mca/btl/tcp/btl_tcp_endpoint.h ompi/mca/btl/tcp/btl_tcp_ft.h ompi/mca/btl/tcp/btl_tcp_proc.h ompi/mca/btl/template/btl_template_endpoint.h ompi/mca/btl/template/btl_template_proc.h ompi/mca/btl/udapl/btl_udapl_eager_rdma.h ompi/mca/btl/udapl/btl_udapl_endpoint.h ompi/mca/btl/udapl/btl_udapl_mca.h ompi/mca/btl/udapl/btl_udapl_proc.h ompi/mca/mtl/mx/mtl_mx_endpoint.h ompi/mca/mtl/mx/mtl_mx.h ompi/mca/mtl/psm/mtl_psm_endpoint.h ompi/mca/mtl/psm/mtl_psm.h ompi/mca/pml/cm/pml_cm_component.h ompi/mca/pml/csum/pml_csum_comm.h ompi/mca/pml/dr/pml_dr_comm.h ompi/mca/pml/dr/pml_dr_component.h ompi/mca/pml/dr/pml_dr_endpoint.h ompi/mca/pml/dr/pml_dr_recvfrag.h ompi/mca/pml/example/pml_example.h ompi/mca/pml/ob1/pml_ob1_comm.h ompi/mca/pml/ob1/pml_ob1_component.h ompi/mca/pml/ob1/pml_ob1_endpoint.h ompi/mca/pml/ob1/pml_ob1_rdmafrag.h ompi/mca/pml/ob1/pml_ob1_recvfrag.h ompi/mca/pml/v/pml_v_output.h opal/include/opal/prefetch.h opal/mca/timer/aix/timer_aix.h opal/util/qsort.h test/support/components.h This commit was SVN r21855. The following SVN revision numbers were found above: r2 --> open-mpi/ompi@58fdc188553052bc2e893ba28fb28fddbe78435a
2009-08-20 15:42:18 +04:00
BEGIN_C_DECLS
/*
* memory hook callback, called when memory is free'd out from under us
*/
opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
void mca_rcache_base_mem_cb (void* base, size_t size, void* cbdata, bool from_alloc);
- Replace combinations of #if defined (c_plusplus) defined (__cplusplus) followed by extern "C" { and the closing counterpart by BEGIN_C_DECLS and END_C_DECLS. Notable exceptions are: - opal/include/opal_config_bottom.h: This is our generated code, that itself defines BEGIN_C_DECL and END_C_DECL - ompi/mpi/cxx/mpicxx.h: Here we do not include opal_config_bottom.h: - Belongs to external code: opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.c opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.h - opal/include/opal/prefetch.h: Has C++ specific macros that are protected: - Had #if ... } #endif _and_ END_C_DECLS (aka end up with 2x END_C_DECLS) ompi/mca/btl/openib/btl_openib.h - opal/event/event.h has #ifdef __cplusplus as BEGIN_C_DECLS... - opal/win32/ompi_process.h: had extern "C"\n {... opal/win32/ompi_process.h: dito - ompi/mca/btl/pcie/btl_pcie_lex.l: needed to add *_C_DECLS ompi/mpi/f90/test/align_c.c: dito - ompi/debuggers/msgq_interface.h: used #ifdef __cplusplus - ompi/mpi/f90/xml/common-C.xsl: Amend Tested on linux using --with-openib and --with-mx The following do not contain either opal_config.h, orte_config.h or ompi_config.h (but possibly other header files, that include one of the above): ompi/mca/bml/r2/bml_r2_ft.h ompi/mca/btl/gm/btl_gm_endpoint.h ompi/mca/btl/gm/btl_gm_proc.h ompi/mca/btl/mx/btl_mx_endpoint.h ompi/mca/btl/ofud/btl_ofud_endpoint.h ompi/mca/btl/ofud/btl_ofud_frag.h ompi/mca/btl/ofud/btl_ofud_proc.h ompi/mca/btl/openib/btl_openib_mca.h ompi/mca/btl/portals/btl_portals_endpoint.h ompi/mca/btl/portals/btl_portals_frag.h ompi/mca/btl/sctp/btl_sctp_endpoint.h ompi/mca/btl/sctp/btl_sctp_proc.h ompi/mca/btl/tcp/btl_tcp_endpoint.h ompi/mca/btl/tcp/btl_tcp_ft.h ompi/mca/btl/tcp/btl_tcp_proc.h ompi/mca/btl/template/btl_template_endpoint.h ompi/mca/btl/template/btl_template_proc.h ompi/mca/btl/udapl/btl_udapl_eager_rdma.h ompi/mca/btl/udapl/btl_udapl_endpoint.h ompi/mca/btl/udapl/btl_udapl_mca.h ompi/mca/btl/udapl/btl_udapl_proc.h ompi/mca/mtl/mx/mtl_mx_endpoint.h ompi/mca/mtl/mx/mtl_mx.h ompi/mca/mtl/psm/mtl_psm_endpoint.h ompi/mca/mtl/psm/mtl_psm.h ompi/mca/pml/cm/pml_cm_component.h ompi/mca/pml/csum/pml_csum_comm.h ompi/mca/pml/dr/pml_dr_comm.h ompi/mca/pml/dr/pml_dr_component.h ompi/mca/pml/dr/pml_dr_endpoint.h ompi/mca/pml/dr/pml_dr_recvfrag.h ompi/mca/pml/example/pml_example.h ompi/mca/pml/ob1/pml_ob1_comm.h ompi/mca/pml/ob1/pml_ob1_component.h ompi/mca/pml/ob1/pml_ob1_endpoint.h ompi/mca/pml/ob1/pml_ob1_rdmafrag.h ompi/mca/pml/ob1/pml_ob1_recvfrag.h ompi/mca/pml/v/pml_v_output.h opal/include/opal/prefetch.h opal/mca/timer/aix/timer_aix.h opal/util/qsort.h test/support/components.h This commit was SVN r21855. The following SVN revision numbers were found above: r2 --> open-mpi/ompi@58fdc188553052bc2e893ba28fb28fddbe78435a
2009-08-20 15:42:18 +04:00
END_C_DECLS
opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
#endif /* MCA_RCACHE_BASE_MEM_CB_H */