1
1
openmpi/opal/mca/common/cuda/common_cuda.h

112 строки
5.1 KiB
C
Исходник Обычный вид История

/* -*- Mode: C; c-basic-offset:4 ; indent-tabs-mode:nil -*- */
/*
* Copyright (c) 2004-2006 The Trustees of Indiana University and Indiana
* University Research and Technology
* Corporation. All rights reserved.
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
* Copyright (c) 2004-2013 The University of Tennessee and The University
* of Tennessee Research Foundation. All rights
* reserved.
* Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
* University of Stuttgart. All rights reserved.
* Copyright (c) 2004-2006 The Regents of the University of California.
* All rights reserved.
* Copyright (c) 2011-2015 NVIDIA Corporation. All rights reserved.
* Copyright (c) 2015 Los Alamos National Security, LLC. All rights
* reserved.
* $COPYRIGHT$
*
* Additional copyrights may follow
*
* $HEADER$
*/
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
#ifndef OPAL_MCA_COMMON_CUDA_H
#define OPAL_MCA_COMMON_CUDA_H
#include "opal/mca/btl/btl.h"
#include "opal/datatype/opal_convertor.h"
#define MEMHANDLE_SIZE 8
#define EVTHANDLE_SIZE 8
opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
struct mca_rcache_common_cuda_reg_data_t {
uint64_t memHandle[MEMHANDLE_SIZE];
uint64_t evtHandle[EVTHANDLE_SIZE];
uint64_t event;
opal_ptr_t memh_seg_addr;
size_t memh_seg_len;
};
opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
typedef struct mca_rcache_common_cuda_reg_data_t mca_rcache_common_cuda_reg_data_t;
opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
struct mca_rcache_common_cuda_reg_t {
mca_rcache_base_registration_t base;
mca_rcache_common_cuda_reg_data_t data;
};
opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
typedef struct mca_rcache_common_cuda_reg_t mca_rcache_common_cuda_reg_t;
extern bool mca_common_cuda_enabled;
OPAL_DECLSPEC void mca_common_cuda_register_mca_variables(void);
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-28 01:09:41 +04:00
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
OPAL_DECLSPEC void mca_common_cuda_register(void *ptr, size_t amount, char *msg);
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
OPAL_DECLSPEC void mca_common_cuda_unregister(void *ptr, char *msg);
opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
OPAL_DECLSPEC void mca_common_wait_stream_synchronize(mca_rcache_common_cuda_reg_t *rget_reg);
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
OPAL_DECLSPEC int mca_common_cuda_memcpy(void *dst, void *src, size_t amount, char *msg,
struct mca_btl_base_descriptor_t *, int *done);
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
OPAL_DECLSPEC int mca_common_cuda_record_ipc_event(char *msg,
struct mca_btl_base_descriptor_t *frag);
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
OPAL_DECLSPEC int mca_common_cuda_record_dtoh_event(char *msg,
struct mca_btl_base_descriptor_t *frag);
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
OPAL_DECLSPEC int mca_common_cuda_record_htod_event(char *msg,
struct mca_btl_base_descriptor_t *frag);
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
OPAL_DECLSPEC void *mca_common_cuda_get_dtoh_stream(void);
OPAL_DECLSPEC void *mca_common_cuda_get_htod_stream(void);
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
OPAL_DECLSPEC int progress_one_cuda_ipc_event(struct mca_btl_base_descriptor_t **);
OPAL_DECLSPEC int progress_one_cuda_dtoh_event(struct mca_btl_base_descriptor_t **);
OPAL_DECLSPEC int progress_one_cuda_htod_event(struct mca_btl_base_descriptor_t **);
opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
OPAL_DECLSPEC int mca_common_cuda_memhandle_matches(mca_rcache_common_cuda_reg_t *new_reg,
mca_rcache_common_cuda_reg_t *old_reg);
OPAL_DECLSPEC void mca_common_cuda_construct_event_and_handle(uintptr_t *event, void *handle);
OPAL_DECLSPEC void mca_common_cuda_destruct_event(uintptr_t event);
opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
OPAL_DECLSPEC int cuda_getmemhandle(void *base, size_t, mca_rcache_base_registration_t *newreg,
mca_rcache_base_registration_t *hdrreg);
OPAL_DECLSPEC int cuda_ungetmemhandle(void *reg_data, mca_rcache_base_registration_t *reg);
OPAL_DECLSPEC int cuda_openmemhandle(void *base, size_t size, mca_rcache_base_registration_t *newreg,
mca_rcache_base_registration_t *hdrreg);
OPAL_DECLSPEC int cuda_closememhandle(void *reg_data, mca_rcache_base_registration_t *reg);
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
OPAL_DECLSPEC int mca_common_cuda_get_device(int *devicenum);
OPAL_DECLSPEC int mca_common_cuda_device_can_access_peer(int *access, int dev1, int dev2);
OPAL_DECLSPEC int mca_common_cuda_stage_one_init(void);
OPAL_DECLSPEC int mca_common_cuda_get_address_range(void *pbase, size_t *psize, void *base);
OPAL_DECLSPEC void mca_common_cuda_fini(void);
#if OPAL_CUDA_GDR_SUPPORT
opal: rework mpool and rcache frameworks This commit rewrites both the mpool and rcache frameworks. Summary of changes: - Before this change a significant portion of the rcache functionality lived in mpool components. This meant that it was impossible to add a new memory pool to use with rdma networks (ugni, openib, etc) without duplicating the functionality of an existing mpool component. All the registration functionality has been removed from the mpool and placed in the rcache framework. - All registration cache mpools components (udreg, grdma, gpusm, rgpusm) have been changed to rcache components. rcaches are allocated and released in the same way mpool components were. - It is now valid to pass NULL as the resources argument when creating an rcache. At this time the gpusm and rgpusm components support this. All other rcache components require non-NULL resources. - A new mpool component has been added: hugepage. This component supports huge page allocations on linux. - Memory pools are now allocated using "hints". Each mpool component is queried with the hints and returns a priority. The current hints supported are NULL (uses posix_memalign/malloc), page_size=x (huge page mpool), and mpool=x. - The sm mpool has been moved to common/sm. This reflects that the sm mpool is specialized and not meant for any general allocations. This mpool may be moved back into the mpool framework if there is any objection. - The opal_free_list_init arguments have been updated. The unused0 argument is not used to pass in the registration cache module. The mpool registration flags are now rcache registration flags. - All components have been updated to make use of the new framework interfaces. As this commit makes significant changes to both the mpool and rcache frameworks both versions have been bumped to 3.0.0. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-11-02 22:07:08 +03:00
OPAL_DECLSPEC bool mca_common_cuda_previously_freed_memory(mca_rcache_base_registration_t *reg);
OPAL_DECLSPEC void mca_common_cuda_get_buffer_id(mca_rcache_base_registration_t *reg);
#endif /* OPAL_CUDA_GDR_SUPPORT */
/**
* Return: 0 if no packing is required for sending (the upper layer
* can use directly the pointer to the contiguous user
* buffer).
* 1 if data does need to be packed, i.e. heterogeneous peers
* (source arch != dest arch) or non contiguous memory
* layout.
*/
static inline int32_t opal_convertor_cuda_need_buffers( opal_convertor_t* pConvertor )
{
int32_t retval;
uint32_t cudaflag = pConvertor->flags & CONVERTOR_CUDA; /* Save CUDA flag */
pConvertor->flags &= ~CONVERTOR_CUDA; /* Clear CUDA flag if it exists */
retval = opal_convertor_need_buffers(pConvertor);
pConvertor->flags |= cudaflag; /* Restore CUDA flag */
return retval;
}
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
#endif /* OPAL_MCA_COMMON_CUDA_H */