ports/openmpi
ports/openmpi
1
1
Форкнуть 0
Код Релизы Активность
5687ce8a07
openmpi/opal/mca/btl/usnic/btl_usnic_ack.h

85 строки
2.8 KiB
C
Исходник Обычный вид История

First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
/*
usnic: Shrink sequence numbers to 16 bits Authored-by: Reese Faucette <rfaucett@cisco.com> Reviewed-by: Jeff Squyres <jsquyres@cisco.com> cmr=v1.7.5:ticket=trac:4253 This commit was SVN r30834. The following Trac tickets were found above: Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
2014-02-26 11:40:10 +04:00
* Copyright (c) 2013-2014 Cisco Systems, Inc. All rights reserved.
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
* $COPYRIGHT$
*
* Additional copyrights may follow
*
* $HEADER$
*/
#ifndef BTL_USNIC_ACK_H
#define BTL_USNIC_ACK_H
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
#include "opal_config.h"
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
#include "opal/class/opal_hotel.h"
#include "btl_usnic.h"
#include "btl_usnic_frag.h"
#include "btl_usnic_endpoint.h"
usnic: refactor callback invocation This makes it a little easier to see what's happening with callbacks to the PML. Reviewed-by: Jeff Squyres <jsquyres@cisco.com> Reviewed-by: Reese Faucette <rfaucett@cisco.com> This commit was SVN r29591.
2013-11-05 02:51:48 +04:00
/* Invoke the descriptor callback for the frag, updating stats and clearing the
* _CALLBACK flag in the process. */
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
#define OPAL_BTL_USNIC_DO_SEND_FRAG_CB(module, send_frag, comment) \
usnic: refactor callback invocation This makes it a little easier to see what's happening with callbacks to the PML. Reviewed-by: Jeff Squyres <jsquyres@cisco.com> Reviewed-by: Reese Faucette <rfaucett@cisco.com> This commit was SVN r29591.
2013-11-05 02:51:48 +04:00
do { \
MSGDEBUG1_OUT("%s:%d: %s send callback for module=%p frag=%p\n", \
__func__, __LINE__, \
(comment), (void *)(module), (void *)(send_frag)); \
(send_frag)->sf_base.uf_base.des_cbfunc( \
&(module)->super, \
(send_frag)->sf_endpoint, \
&(send_frag)->sf_base.uf_base, \
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
OPAL_SUCCESS); \
usnic: refactor callback invocation This makes it a little easier to see what's happening with callbacks to the PML. Reviewed-by: Jeff Squyres <jsquyres@cisco.com> Reviewed-by: Reese Faucette <rfaucett@cisco.com> This commit was SVN r29591.
2013-11-05 02:51:48 +04:00
frag->sf_base.uf_base.des_flags &= ~MCA_BTL_DES_SEND_ALWAYS_CALLBACK; \
Help decrease conflicts between SVN trunk and Cisco git branch of OMPI v1.6 branch This commit was SVN r29715.
2013-11-16 01:35:56 +04:00
++((module)->stats.pml_send_callbacks); \
usnic: refactor callback invocation This makes it a little easier to see what's happening with callbacks to the PML. Reviewed-by: Jeff Squyres <jsquyres@cisco.com> Reviewed-by: Reese Faucette <rfaucett@cisco.com> This commit was SVN r29591.
2013-11-05 02:51:48 +04:00
} while (0)
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
/*
usnic: remove all trailing whitespace Style cleanup only; no code changes. This commit was SVN r32366.
2014-07-31 00:56:15 +04:00
* Reap an ACK send that is complete
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
*/
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
void opal_btl_usnic_ack_complete(opal_btl_usnic_module_t *module,
opal_btl_usnic_ack_segment_t *ack);
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
/*
* Send an ACK
*/
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
void opal_btl_usnic_ack_send(opal_btl_usnic_module_t *module,
opal_btl_usnic_endpoint_t *endpoint);
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
/*
* Callback for when a send times out without receiving a
* corresponding ACK
*/
usnic: remove all trailing whitespace Style cleanup only; no code changes. This commit was SVN r32366.
2014-07-31 00:56:15 +04:00
void opal_btl_usnic_ack_timeout(opal_hotel_t *hotel, int room_num,
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
void *occupant);
/*
* Handle an incoming ACK
*/
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
void opal_btl_usnic_handle_ack(opal_btl_usnic_endpoint_t *endpoint,
opal_btl_usnic_seq_t ack_seq);
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
static inline void
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
opal_btl_usnic_piggyback_ack(
opal_btl_usnic_endpoint_t *endpoint,
opal_btl_usnic_send_segment_t *sseg)
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
{
/* If ACK is needed, piggy-back it here and send it on */
if (endpoint->endpoint_ack_needed) {
George did the work and deserves all the credit for it. Ralph did the merge, and deserves whatever blame results from errors in it :-) WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
2014-07-26 04:47:28 +04:00
opal_btl_usnic_remove_from_endpoints_needing_ack(endpoint);
usnic: remove all trailing whitespace Style cleanup only; no code changes. This commit was SVN r32366.
2014-07-31 00:56:15 +04:00
sseg->ss_base.us_btl_header->ack_seq =
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
endpoint->endpoint_next_contig_seq_to_recv - 1;
usnic: Shrink sequence numbers to 16 bits Authored-by: Reese Faucette <rfaucett@cisco.com> Reviewed-by: Jeff Squyres <jsquyres@cisco.com> cmr=v1.7.5:ticket=trac:4253 This commit was SVN r30834. The following Trac tickets were found above: Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
2014-02-26 11:40:10 +04:00
sseg->ss_base.us_btl_header->ack_present = 1;
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
#if MSGDEBUG1
usnic: stomp format specifier warnings The usnic BTL now builds cleanly under `--enable-picky` when `MSGDEBUG1` is set. Reviewed-by: jsquyres cmr=v1.7.4:reviewer=jsquyres This commit was SVN r29097.
2013-08-30 03:24:14 +04:00
opal_output(0, "Piggy-backing ACK for sequence %"UDSEQ"\n",
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
sseg->ss_base.us_btl_header->ack_seq);
#endif
} else {
usnic: Shrink sequence numbers to 16 bits Authored-by: Reese Faucette <rfaucett@cisco.com> Reviewed-by: Jeff Squyres <jsquyres@cisco.com> cmr=v1.7.5:ticket=trac:4253 This commit was SVN r30834. The following Trac tickets were found above: Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
2014-02-26 11:40:10 +04:00
sseg->ss_base.us_btl_header->ack_present = 0;
First commit of the Cisco usNIC BTL. This BTL accesses the Cisco usNIC Linux device via the Linux verbs API via Unreliable Datagram queue pairs. A few noteworthy points: * This BTL does most of its own fragmentation; it tells the PML that it has a very high max_send_size (much higher than the network MTU). * Since UD fragments are, by definition, unreliable, the usnic BTL handles all of its own reliability via a sliding window approach using the opal_hotel construct and many tricks stolen from the corpus of knowledge surrounding efficient TCP. * There is a fun PML latency-metric based optimization for NUMA awareness of short messages. * Note that this is ''not'' a generic UD verbs BTL; it is specific to the Cisco usNIC device. This commit was SVN r28879.
2013-07-20 02:13:58 +04:00
}
}
#endif /* BTL_USNIC_ACK_H */
Копировать постоянную ссылку