ports/openmpi
ports/openmpi
1
1
Форкнуть 0
Код Релизы Активность
openmpi/opal/mca/base/help-mca-param.txt

45 строки
1.5 KiB
Plaintext
Исходник Обычный вид История

Change and add new features to the MCA parameter system: - new preferred API calls for registering MCA parameters are mca_base_param_reg_{int|string} and mca_base_param_reg_{int|string}_name. - See opal/mca/base/mca_base_param.h for docs on new calls. - Can now register and lookup a value at the same time. - Can now mark a parameter "read only" at registration time - Can now mark a parameter "internal" at registration time - Can now associate a help message with the parameter at registration time; displayed in the ompi_info output. The old API calls are still available for backwards compatibility (mca_base_param_register_{int|string}. They will eventually be removed -- all developers are encouraged to use the new APIs from here on out and replace any old calls with the new API. Some params were also renamed -- the previous convention of using "base_" as a prefix for any param that was not associated with a component is henceforth deprecated. Instead, use one of the following prefixes: mca: for anything in the MCA base itself opal: for anything in OPAL orte: for anything in ORTE mpi: for anything in OMPI This commit was SVN r6698.
2005-08-01 22:38:17 +00:00
# -*- text -*-
#
Update the copyright notices for IU and UTK. This commit was SVN r7999.
2005-11-05 19:57:48 +00:00
# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
# University Research and Technology
# Corporation. All rights reserved.
# Copyright (c) 2004-2005 The University of Tennessee and The University
# of Tennessee Research Foundation. All rights
# reserved.
Change and add new features to the MCA parameter system: - new preferred API calls for registering MCA parameters are mca_base_param_reg_{int|string} and mca_base_param_reg_{int|string}_name. - See opal/mca/base/mca_base_param.h for docs on new calls. - Can now register and lookup a value at the same time. - Can now mark a parameter "read only" at registration time - Can now mark a parameter "internal" at registration time - Can now associate a help message with the parameter at registration time; displayed in the ompi_info output. The old API calls are still available for backwards compatibility (mca_base_param_register_{int|string}. They will eventually be removed -- all developers are encouraged to use the new APIs from here on out and replace any old calls with the new API. Some params were also renamed -- the previous convention of using "base_" as a prefix for any param that was not associated with a component is henceforth deprecated. Instead, use one of the following prefixes: mca: for anything in the MCA base itself opal: for anything in OPAL orte: for anything in ORTE mpi: for anything in OMPI This commit was SVN r6698.
2005-08-01 22:38:17 +00:00
# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
# University of Stuttgart. All rights reserved.
# Copyright (c) 2004-2005 The Regents of the University of California.
# All rights reserved.
Fixes trac:1383 Lenny and I went back and forth on whether we should simply register another "mpi_paffinity_alone" MCA param and then try to figure out which one was set in ompi_mpi_init, but there was difficulty in figuring out what to do. So it seemed like the Right Thing to do was to implement what was committed in r18770; then we could tell where MCA parameters were set from and you could do Better Things (this is also useful in the openib BTL, where parameters can be set either via MCA parameter or via an INI file). But after that was done, it seemed only a few steps further to actually implement two new features in the MCA params area: * Synonyms (where one MCA param name is a synonym for another) * Allow MCA params and/or their synonyms to be marked as "deprecated" (printing out warnings if they are used) These features have actually long been discussed/desired, and I had some time in airports and airplanes recently where I could work in this stuff on a standalone laptop. So I did it. :-) This commit introduces these two new features, and then uses them to register mpi_paffinity_alone as a non-deprecated synonym for opal_paffinity_alone. A few other random points in this commit: * Add a few error checks for conditions that were not checked before * Correct some comments in mca_base_params.h * Add a few comments in strategic places * ompi_info now prints additional information: * for any MCA parameter that has synonyms, it lists all the synonyms * synonyms are also output as 1st-class MCA params, but with an additional attribute indicating that they have a "parent" * all MCA param name (both "real" or "synonym") will output an attribute indicating whether it is deprecated or not. A synonym is deprecated if it iself is marked as deprecated (via the mca_base_param_regist_syn() or mca_base_param_register_syn_name() functions) or if its "parent" MCA parameter is deprecated This commit was SVN r18859. The following SVN revision numbers were found above: r18770 --> open-mpi/ompi@8efe67e08cc0575d6221d2f81233d861b4101a9d The following Trac tickets were found above: Ticket 1383 --> https://svn.open-mpi.org/trac/ompi/ticket/1383
2008-07-10 01:44:51 +00:00
# Copyright (c) 2008 Cisco Systems, Inc. All rights reserved.
Change and add new features to the MCA parameter system: - new preferred API calls for registering MCA parameters are mca_base_param_reg_{int|string} and mca_base_param_reg_{int|string}_name. - See opal/mca/base/mca_base_param.h for docs on new calls. - Can now register and lookup a value at the same time. - Can now mark a parameter "read only" at registration time - Can now mark a parameter "internal" at registration time - Can now associate a help message with the parameter at registration time; displayed in the ompi_info output. The old API calls are still available for backwards compatibility (mca_base_param_register_{int|string}. They will eventually be removed -- all developers are encouraged to use the new APIs from here on out and replace any old calls with the new API. Some params were also renamed -- the previous convention of using "base_" as a prefix for any param that was not associated with a component is henceforth deprecated. Instead, use one of the following prefixes: mca: for anything in the MCA base itself opal: for anything in OPAL orte: for anything in ORTE mpi: for anything in OMPI This commit was SVN r6698.
2005-08-01 22:38:17 +00:00
# $COPYRIGHT$
#
# Additional copyrights may follow
#
# $HEADER$
#
# This is the US/English help file for Open MPI MCA error messages.
#
[read-only-param-set]
WARNING: A user-supplied value attempted to override the read-only MCA
parameter named "%s".
The user-supplied value was ignored.
Fixes trac:1383 Lenny and I went back and forth on whether we should simply register another "mpi_paffinity_alone" MCA param and then try to figure out which one was set in ompi_mpi_init, but there was difficulty in figuring out what to do. So it seemed like the Right Thing to do was to implement what was committed in r18770; then we could tell where MCA parameters were set from and you could do Better Things (this is also useful in the openib BTL, where parameters can be set either via MCA parameter or via an INI file). But after that was done, it seemed only a few steps further to actually implement two new features in the MCA params area: * Synonyms (where one MCA param name is a synonym for another) * Allow MCA params and/or their synonyms to be marked as "deprecated" (printing out warnings if they are used) These features have actually long been discussed/desired, and I had some time in airports and airplanes recently where I could work in this stuff on a standalone laptop. So I did it. :-) This commit introduces these two new features, and then uses them to register mpi_paffinity_alone as a non-deprecated synonym for opal_paffinity_alone. A few other random points in this commit: * Add a few error checks for conditions that were not checked before * Correct some comments in mca_base_params.h * Add a few comments in strategic places * ompi_info now prints additional information: * for any MCA parameter that has synonyms, it lists all the synonyms * synonyms are also output as 1st-class MCA params, but with an additional attribute indicating that they have a "parent" * all MCA param name (both "real" or "synonym") will output an attribute indicating whether it is deprecated or not. A synonym is deprecated if it iself is marked as deprecated (via the mca_base_param_regist_syn() or mca_base_param_register_syn_name() functions) or if its "parent" MCA parameter is deprecated This commit was SVN r18859. The following SVN revision numbers were found above: r18770 --> open-mpi/ompi@8efe67e08cc0575d6221d2f81233d861b4101a9d The following Trac tickets were found above: Ticket 1383 --> https://svn.open-mpi.org/trac/ompi/ticket/1383
2008-07-10 01:44:51 +00:00
#
* Added 2 new MCA parameters - mca_base_param_file_prefix (Default: NULL) This is the fullname of the "-am" mpirun option. Used to specify a ':' separated list of AMCA parameter set files. - mca_base_param_file_path (Default: $SYSCONFDIR/amca-param-sets/:$CWD) The path to search for AMCA files with relative paths. A warning will be printed if the AMCA file cannot be found. * Added a new function "mca_base_param_recache_files" the re-reads the file configurations. This is used internally to help bootstrap the MCA system. * Added a new orterun/mpirun command line option '-am' that aliases for the mca_base_param_file_prefix MCA parameter * Exposed the opal_path_access function as it is generally useful in other places in the code. * New function "opal_cmd_line_make_opt_mca" which will allow you to append a new command line option with MCA parameter identifiers to set at the same time. Previously this could only be done at command line declaration time. * Added a new directory under the $pkgdatadir named "amca-param-sets" where all the 'shipped with' Open MPI AMCA parameter sets are placed. This is the first place to search for AMCA sets with relative paths. * An example.conf AMCA parameter set file is located in contrib/amca-param-sets/. * Jeff Squyres contributed an OpenIB AMCA set for benchmarking. Note: You will need to autogen with this commit as it adds a configure param. Sorry :( This commit was SVN r13867.
2007-03-01 13:39:20 +00:00
[missing-param-file]
Process %d Unable to locate the parameter file "%s" in the following search path:
%s
Fixes trac:1383 Lenny and I went back and forth on whether we should simply register another "mpi_paffinity_alone" MCA param and then try to figure out which one was set in ompi_mpi_init, but there was difficulty in figuring out what to do. So it seemed like the Right Thing to do was to implement what was committed in r18770; then we could tell where MCA parameters were set from and you could do Better Things (this is also useful in the openib BTL, where parameters can be set either via MCA parameter or via an INI file). But after that was done, it seemed only a few steps further to actually implement two new features in the MCA params area: * Synonyms (where one MCA param name is a synonym for another) * Allow MCA params and/or their synonyms to be marked as "deprecated" (printing out warnings if they are used) These features have actually long been discussed/desired, and I had some time in airports and airplanes recently where I could work in this stuff on a standalone laptop. So I did it. :-) This commit introduces these two new features, and then uses them to register mpi_paffinity_alone as a non-deprecated synonym for opal_paffinity_alone. A few other random points in this commit: * Add a few error checks for conditions that were not checked before * Correct some comments in mca_base_params.h * Add a few comments in strategic places * ompi_info now prints additional information: * for any MCA parameter that has synonyms, it lists all the synonyms * synonyms are also output as 1st-class MCA params, but with an additional attribute indicating that they have a "parent" * all MCA param name (both "real" or "synonym") will output an attribute indicating whether it is deprecated or not. A synonym is deprecated if it iself is marked as deprecated (via the mca_base_param_regist_syn() or mca_base_param_register_syn_name() functions) or if its "parent" MCA parameter is deprecated This commit was SVN r18859. The following SVN revision numbers were found above: r18770 --> open-mpi/ompi@8efe67e08cc0575d6221d2f81233d861b4101a9d The following Trac tickets were found above: Ticket 1383 --> https://svn.open-mpi.org/trac/ompi/ticket/1383
2008-07-10 01:44:51 +00:00
#
[deprecated mca param env]
A deprecated MCA parameter value was specified in the environment or
on the command line. Deprecated MCA parameters should be avoided;
they may disappear in future releases.
Deprecated parameter: %s
#
[deprecated mca param file]
A deprecated MCA parameter value was specified in an MCA parameter
file. Deprecated MCA parameters should be avoided; they may disappear
in future releases.
Deprecated parameter: %s
Копировать постоянную ссылку