1
1
openmpi/opal/runtime/opal_info_support.c

1210 строки
42 KiB
C
Исходник Обычный вид История

/* -*- Mode: C; c-basic-offset:4 ; indent-tabs-mode:nil -*- */
/*
* Copyright (c) 2004-2010 The Trustees of Indiana University and Indiana
* University Research and Technology
* Corporation. All rights reserved.
* Copyright (c) 2004-2011 The University of Tennessee and The University
* of Tennessee Research Foundation. All rights
* reserved.
* Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
* University of Stuttgart. All rights reserved.
* Copyright (c) 2004-2005 The Regents of the University of California.
* All rights reserved.
* Copyright (c) 2006-2015 Cisco Systems, Inc. All rights reserved.
opal: fix multiple bugs in MCA and opal This commit fixes the following bugs: - opal_output_finalize did not properly set internal state. This caused problems when calling the sequence opal_output_init (), opal_output_finalize (), opal_output_init (). - opal_info support called mca_base_open () but never called the matching mca_base_close (). mca_base_open () and mca_base_close () have been updated to use a open count instead of an open flag to allow mca_base_open to be called through multiple paths (as may be the case when MPI_T is in use). - orte_info support did not register opal variables. This can cause orte-info to not return opal variables. - opal_info, orte_info, and ompi_info support have been updated to use a register count. - When opening the dl framework the reference count was added to ensure the framework stuck around. The framework being closed prematurely was a bug in the MCA base that has since been corrected. The increment (and associated decrement) have been removed. - dl/dlopen did not set the value of mca_dl_dlopen_component.filename_suffixes_mca_storage on each call to register. Instead the value was set in the component structure. This caused the value to be lost when re-loading the component. Fixed by setting the default value in register. - Reset shmem framework state on close to avoid returning a stale component after reloading opal/shmem. - MCA base parameters were not properly deregistered when the MCA base was closed. This commit may fix #374. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-04-07 23:42:35 +03:00
* Copyright (c) 2010-2015 Los Alamos National Security, LLC.
* All rights reserved.
* Copyright (c) 2011-2012 University of Houston. All rights reserved.
* $COPYRIGHT$
*
* Additional copyrights may follow
*
* $HEADER$
*/
#include "opal_config.h"
#include <string.h>
#include <ctype.h>
#ifdef HAVE_UNISTD_H
#include <unistd.h>
#endif
#include <errno.h>
#include "opal/class/opal_list.h"
#include "opal/class/opal_pointer_array.h"
#include "opal/util/output.h"
#include "opal/util/cmd_line.h"
#include "opal/util/error.h"
#include "opal/util/argv.h"
#include "opal/util/show_help.h"
#include "opal/runtime/opal.h"
#include "opal/dss/dss.h"
#include "opal/mca/base/mca_base_pvar.h"
#include "opal/include/opal/frameworks.h"
#include "opal/mca/installdirs/installdirs.h"
#include "opal/runtime/opal_info_support.h"
const char *opal_info_path_prefix = "prefix";
const char *opal_info_path_bindir = "bindir";
const char *opal_info_path_libdir = "libdir";
const char *opal_info_path_incdir = "incdir";
const char *opal_info_path_mandir = "mandir";
const char *opal_info_path_pkglibdir = "pkglibdir";
const char *opal_info_path_sysconfdir = "sysconfdir";
const char *opal_info_path_exec_prefix = "exec_prefix";
const char *opal_info_path_sbindir = "sbindir";
const char *opal_info_path_libexecdir = "libexecdir";
const char *opal_info_path_datarootdir = "datarootdir";
const char *opal_info_path_datadir = "datadir";
const char *opal_info_path_sharedstatedir = "sharedstatedir";
const char *opal_info_path_localstatedir = "localstatedir";
const char *opal_info_path_infodir = "infodir";
const char *opal_info_path_pkgdatadir = "pkgdatadir";
const char *opal_info_path_pkgincludedir = "pkgincludedir";
bool opal_info_pretty = true;
mca_base_register_flag_t opal_info_register_flags = MCA_BASE_REGISTER_ALL;
const char *opal_info_type_all = "all";
const char *opal_info_type_opal = "opal";
const char *opal_info_component_all = "all";
const char *opal_info_param_all = "all";
const char *opal_info_ver_full = "full";
const char *opal_info_ver_major = "major";
const char *opal_info_ver_minor = "minor";
const char *opal_info_ver_release = "release";
const char *opal_info_ver_greek = "greek";
const char *opal_info_ver_repo = "repo";
const char *opal_info_ver_all = "all";
const char *opal_info_ver_mca = "mca";
const char *opal_info_ver_type = "type";
const char *opal_info_ver_component = "component";
opal: fix multiple bugs in MCA and opal This commit fixes the following bugs: - opal_output_finalize did not properly set internal state. This caused problems when calling the sequence opal_output_init (), opal_output_finalize (), opal_output_init (). - opal_info support called mca_base_open () but never called the matching mca_base_close (). mca_base_open () and mca_base_close () have been updated to use a open count instead of an open flag to allow mca_base_open to be called through multiple paths (as may be the case when MPI_T is in use). - orte_info support did not register opal variables. This can cause orte-info to not return opal variables. - opal_info, orte_info, and ompi_info support have been updated to use a register count. - When opening the dl framework the reference count was added to ensure the framework stuck around. The framework being closed prematurely was a bug in the MCA base that has since been corrected. The increment (and associated decrement) have been removed. - dl/dlopen did not set the value of mca_dl_dlopen_component.filename_suffixes_mca_storage on each call to register. Instead the value was set in the component structure. This caused the value to be lost when re-loading the component. Fixed by setting the default value in register. - Reset shmem framework state on close to avoid returning a stale component after reloading opal/shmem. - MCA base parameters were not properly deregistered when the MCA base was closed. This commit may fix #374. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-04-07 23:42:35 +03:00
static int opal_info_registered = 0;
static void component_map_construct(opal_info_component_map_t *map)
{
map->type = NULL;
}
static void component_map_destruct(opal_info_component_map_t *map)
{
if (NULL != map->type) {
free(map->type);
}
/* the type close functions will release the
* list of components
*/
}
OBJ_CLASS_INSTANCE(opal_info_component_map_t,
opal_list_item_t,
component_map_construct,
component_map_destruct);
int opal_info_init(int argc, char **argv,
opal_cmd_line_t *opal_info_cmd_line)
{
int ret;
bool want_help = false;
bool cmd_error = false;
char **app_env = NULL, **global_env = NULL;
/* Initialize the argv parsing handle */
if (OPAL_SUCCESS != (ret = opal_init_util(&argc, &argv))) {
opal_show_help("help-opal_info.txt", "lib-call-fail", true,
"opal_init_util", __FILE__, __LINE__, NULL);
exit(ret);
}
/* add the cmd line options */
opal_cmd_line_make_opt3(opal_info_cmd_line, 'V', NULL, "version", 0,
"Show version of Open MPI");
opal_cmd_line_make_opt3(opal_info_cmd_line, '\0', NULL, "param", 2,
"Show MCA parameters. The first parameter is the framework (or the keyword \"all\"); the second parameter is the specific component name (or the keyword \"all\").");
opal_cmd_line_make_opt3(opal_info_cmd_line, '\0', NULL, "params", 2,
"Synonym for --param");
opal_cmd_line_make_opt3(opal_info_cmd_line, '\0', NULL, "internal", 0,
"Show internal MCA parameters (not meant to be modified by users)");
opal_cmd_line_make_opt3(opal_info_cmd_line, '\0', NULL, "path", 1,
"Show paths that Open MPI was configured with. Accepts the following parameters: prefix, bindir, libdir, incdir, mandir, pkglibdir, sysconfdir, all");
opal_cmd_line_make_opt3(opal_info_cmd_line, '\0', NULL, "arch", 0,
"Show architecture Open MPI was compiled on");
opal_cmd_line_make_opt3(opal_info_cmd_line, 'c', NULL, "config", 0,
"Show configuration options");
opal_cmd_line_make_opt3(opal_info_cmd_line, 't', NULL, "type", 1,
"Show internal MCA parameters with the type specified in parameter.");
opal_cmd_line_make_opt3(opal_info_cmd_line, 'h', NULL, "help", 0,
"Show this help message");
opal_cmd_line_make_opt3(opal_info_cmd_line, '\0', NULL, "pretty-print", 0,
"When used in conjunction with other parameters, the output is displayed in 'pretty-print' format (default)");
opal_cmd_line_make_opt3(opal_info_cmd_line, '\0', NULL, "parsable", 0,
"When used in conjunction with other parameters, the output is displayed in a machine-parsable format");
opal_cmd_line_make_opt3(opal_info_cmd_line, '\0', NULL, "parseable", 0,
"Synonym for --parsable");
opal_cmd_line_make_opt3(opal_info_cmd_line, '\0', NULL, "hostname", 0,
"Show the hostname that Open MPI was configured and built on");
opal_cmd_line_make_opt3(opal_info_cmd_line, 'a', NULL, "all", 0,
"Show all configuration options and MCA parameters");
opal_cmd_line_make_opt3(opal_info_cmd_line, 'l', NULL, "level", 1,
"Show only variables with at most this level (1-9)");
opal_cmd_line_make_opt3(opal_info_cmd_line, 's', NULL, "selected-only", 0,
"Show only variables from selected components");
/* set our threading level */
opal_set_using_threads(false);
/* Get MCA parameters, if any */
if( OPAL_SUCCESS != mca_base_open() ) {
opal_show_help("help-opal_info.txt", "lib-call-fail", true, "mca_base_open", __FILE__, __LINE__ );
opal_finalize_util();
return OPAL_ERROR;
}
mca_base_cmd_line_setup(opal_info_cmd_line);
/* Initialize the opal_output system */
if (!opal_output_init()) {
return OPAL_ERROR;
}
/* Do the parsing */
ret = opal_cmd_line_parse(opal_info_cmd_line, false, argc, argv);
if (OPAL_SUCCESS != ret) {
cmd_error = true;
if (OPAL_ERR_SILENT != ret) {
fprintf(stderr, "%s: command line error (%s)\n", argv[0],
opal_strerror(ret));
}
}
if (!cmd_error &&
(opal_cmd_line_is_taken(opal_info_cmd_line, "help") ||
opal_cmd_line_is_taken(opal_info_cmd_line, "h"))) {
char *str, *usage;
want_help = true;
usage = opal_cmd_line_get_usage_msg(opal_info_cmd_line);
str = opal_show_help_string("help-opal_info.txt", "usage",
true, usage);
if (NULL != str) {
printf("%s", str);
free(str);
}
free(usage);
}
/* If we had a cmd line parse error, or we showed the help
message, it's time to exit. */
if (cmd_error || want_help) {
mca_base_close();
OBJ_RELEASE(opal_info_cmd_line);
opal_finalize_util();
exit(cmd_error ? 1 : 0);
}
mca_base_cmd_line_process_args(opal_info_cmd_line, &app_env, &global_env);
/* set the flags */
if (opal_cmd_line_is_taken(opal_info_cmd_line, "pretty-print")) {
opal_info_pretty = true;
} else if (opal_cmd_line_is_taken(opal_info_cmd_line, "parsable") || opal_cmd_line_is_taken(opal_info_cmd_line, "parseable")) {
opal_info_pretty = false;
}
if (opal_cmd_line_is_taken(opal_info_cmd_line, "selected-only")) {
/* register only selected components */
opal_info_register_flags = MCA_BASE_REGISTER_DEFAULT;
}
return OPAL_SUCCESS;
}
void opal_info_finalize(void)
{
opal_finalize_util();
}
static int info_register_framework (mca_base_framework_t *framework, opal_pointer_array_t *component_map)
{
opal_info_component_map_t *map;
int rc;
rc = mca_base_framework_register(framework, opal_info_register_flags);
if (OPAL_SUCCESS != rc && OPAL_ERR_BAD_PARAM != rc) {
return rc;
}
if (NULL != component_map) {
map = OBJ_NEW(opal_info_component_map_t);
map->type = strdup(framework->framework_name);
map->components = &framework->framework_components;
opal_pointer_array_add(component_map, map);
}
return rc;
}
int opal_info_register_project_frameworks (const char *project_name, mca_base_framework_t **frameworks,
opal_pointer_array_t *component_map)
{
int i, rc=OPAL_SUCCESS;
for (i=0; NULL != frameworks[i]; i++) {
if (OPAL_SUCCESS != (rc = info_register_framework(frameworks[i], component_map))) {
if (OPAL_ERR_BAD_PARAM == rc) {
fprintf(stderr, "\nA \"bad parameter\" error was encountered when opening the %s %s framework\n",
project_name, frameworks[i]->framework_name);
fprintf(stderr, "The output received from that framework includes the following parameters:\n\n");
} else if (OPAL_ERR_NOT_AVAILABLE != rc) {
fprintf(stderr, "%s_info_register: %s failed\n", project_name, frameworks[i]->framework_name);
rc = OPAL_ERROR;
} else {
continue;
}
break;
}
}
return rc;
}
void opal_info_register_types(opal_pointer_array_t *mca_types)
{
int i;
/* add the top-level types */
opal_pointer_array_add(mca_types, "mca");
opal_pointer_array_add(mca_types, "opal");
/* push all the types found by autogen */
for (i=0; NULL != opal_frameworks[i]; i++) {
opal_pointer_array_add(mca_types, opal_frameworks[i]->framework_name);
}
}
int opal_info_register_framework_params(opal_pointer_array_t *component_map)
{
int rc;
opal: fix multiple bugs in MCA and opal This commit fixes the following bugs: - opal_output_finalize did not properly set internal state. This caused problems when calling the sequence opal_output_init (), opal_output_finalize (), opal_output_init (). - opal_info support called mca_base_open () but never called the matching mca_base_close (). mca_base_open () and mca_base_close () have been updated to use a open count instead of an open flag to allow mca_base_open to be called through multiple paths (as may be the case when MPI_T is in use). - orte_info support did not register opal variables. This can cause orte-info to not return opal variables. - opal_info, orte_info, and ompi_info support have been updated to use a register count. - When opening the dl framework the reference count was added to ensure the framework stuck around. The framework being closed prematurely was a bug in the MCA base that has since been corrected. The increment (and associated decrement) have been removed. - dl/dlopen did not set the value of mca_dl_dlopen_component.filename_suffixes_mca_storage on each call to register. Instead the value was set in the component structure. This caused the value to be lost when re-loading the component. Fixed by setting the default value in register. - Reset shmem framework state on close to avoid returning a stale component after reloading opal/shmem. - MCA base parameters were not properly deregistered when the MCA base was closed. This commit may fix #374. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-04-07 23:42:35 +03:00
if (opal_info_registered++) {
return OPAL_SUCCESS;
}
/* Register mca/base parameters */
if( OPAL_SUCCESS != mca_base_open() ) {
opal_show_help("help-opal_info.txt", "lib-call-fail", true, "mca_base_open", __FILE__, __LINE__ );
return OPAL_ERROR;
}
/* Register the OPAL layer's MCA parameters */
if (OPAL_SUCCESS != (rc = opal_register_params())) {
fprintf(stderr, "opal_info_register: opal_register_params failed\n");
return rc;
}
return opal_info_register_project_frameworks("opal", opal_frameworks, component_map);
}
Refs trac:3275. We ran into a case where the OMPI SVN trunk grew a new acceptable MCA parameter value, but this new value was not accepted on the v1.6 branch (hwloc_base_mem_bind_failure_action -- on the trunk it accepts the value "silent", but on the older v1.6 branch, it doesn't). If you set "hwloc_base_mem_bind_failure_action=silent" in the default MCA params file and then accidentally ran with the v1.6 branch, every OMPI executable (including ompi_info) just failed because hwloc_base_open() would say "hey, 'silent' is not a valid value for hwloc_base_mem_bind_failure_action!". Kaboom. The only problem is that it didn't give you any indication of where this value was being set. Quite maddening, from a user perspective. So we changed the ompi_info handles this case. If any framework open function return OMPI_ERR_BAD_PARAM (either because its base MCA params got a bad value or because one of its component register/open functions return OMPI_ERR_BAD_PARAM), ompi_info will stop, print out a warning that it received and error, and then dump out the parameters that it has received so far in the framework that had a problem. At a minimum, this will show the user the MCA param that had an error (it's usually the last one), and ''where it was set from'' (so that they can go fix it). We updated ompi_info to check for O???_ERR_BAD_PARAM from each from the framework opens. Also updated the doxygen docs in mca.h for this O???_BAD_PARAM behavior. And we noticed that mca.h had MCA_SUCCESS and MCA_ERR_??? codes. Why? I think we used them in exactly one place in the code base (mca_base_components_open.c). So we deleted those and just used the normal OPAL_* codes instead. While we were doing this, we also cleaned up a little memory management during ompi_info/orte-info/opal-info finalization. Valgrind still reports a truckload of memory still in use at ompi_info termination, but they mostly look to be components not freeing memory/resources properly (and outside the scope of this fix). This commit was SVN r27306. The following Trac tickets were found above: Ticket 3275 --> https://svn.open-mpi.org/trac/ompi/ticket/3275
2012-09-12 00:47:24 +04:00
void opal_info_close_components(void)
{
int i;
opal: fix multiple bugs in MCA and opal This commit fixes the following bugs: - opal_output_finalize did not properly set internal state. This caused problems when calling the sequence opal_output_init (), opal_output_finalize (), opal_output_init (). - opal_info support called mca_base_open () but never called the matching mca_base_close (). mca_base_open () and mca_base_close () have been updated to use a open count instead of an open flag to allow mca_base_open to be called through multiple paths (as may be the case when MPI_T is in use). - orte_info support did not register opal variables. This can cause orte-info to not return opal variables. - opal_info, orte_info, and ompi_info support have been updated to use a register count. - When opening the dl framework the reference count was added to ensure the framework stuck around. The framework being closed prematurely was a bug in the MCA base that has since been corrected. The increment (and associated decrement) have been removed. - dl/dlopen did not set the value of mca_dl_dlopen_component.filename_suffixes_mca_storage on each call to register. Instead the value was set in the component structure. This caused the value to be lost when re-loading the component. Fixed by setting the default value in register. - Reset shmem framework state on close to avoid returning a stale component after reloading opal/shmem. - MCA base parameters were not properly deregistered when the MCA base was closed. This commit may fix #374. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-04-07 23:42:35 +03:00
assert(opal_info_registered);
if (--opal_info_registered) {
return;
}
for (i=0; NULL != opal_frameworks[i]; i++) {
(void) mca_base_framework_close(opal_frameworks[i]);
}
opal: fix multiple bugs in MCA and opal This commit fixes the following bugs: - opal_output_finalize did not properly set internal state. This caused problems when calling the sequence opal_output_init (), opal_output_finalize (), opal_output_init (). - opal_info support called mca_base_open () but never called the matching mca_base_close (). mca_base_open () and mca_base_close () have been updated to use a open count instead of an open flag to allow mca_base_open to be called through multiple paths (as may be the case when MPI_T is in use). - orte_info support did not register opal variables. This can cause orte-info to not return opal variables. - opal_info, orte_info, and ompi_info support have been updated to use a register count. - When opening the dl framework the reference count was added to ensure the framework stuck around. The framework being closed prematurely was a bug in the MCA base that has since been corrected. The increment (and associated decrement) have been removed. - dl/dlopen did not set the value of mca_dl_dlopen_component.filename_suffixes_mca_storage on each call to register. Instead the value was set in the component structure. This caused the value to be lost when re-loading the component. Fixed by setting the default value in register. - Reset shmem framework state on close to avoid returning a stale component after reloading opal/shmem. - MCA base parameters were not properly deregistered when the MCA base was closed. This commit may fix #374. Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2015-04-07 23:42:35 +03:00
/* release our reference to MCA */
mca_base_close ();
}
Refs trac:3275. We ran into a case where the OMPI SVN trunk grew a new acceptable MCA parameter value, but this new value was not accepted on the v1.6 branch (hwloc_base_mem_bind_failure_action -- on the trunk it accepts the value "silent", but on the older v1.6 branch, it doesn't). If you set "hwloc_base_mem_bind_failure_action=silent" in the default MCA params file and then accidentally ran with the v1.6 branch, every OMPI executable (including ompi_info) just failed because hwloc_base_open() would say "hey, 'silent' is not a valid value for hwloc_base_mem_bind_failure_action!". Kaboom. The only problem is that it didn't give you any indication of where this value was being set. Quite maddening, from a user perspective. So we changed the ompi_info handles this case. If any framework open function return OMPI_ERR_BAD_PARAM (either because its base MCA params got a bad value or because one of its component register/open functions return OMPI_ERR_BAD_PARAM), ompi_info will stop, print out a warning that it received and error, and then dump out the parameters that it has received so far in the framework that had a problem. At a minimum, this will show the user the MCA param that had an error (it's usually the last one), and ''where it was set from'' (so that they can go fix it). We updated ompi_info to check for O???_ERR_BAD_PARAM from each from the framework opens. Also updated the doxygen docs in mca.h for this O???_BAD_PARAM behavior. And we noticed that mca.h had MCA_SUCCESS and MCA_ERR_??? codes. Why? I think we used them in exactly one place in the code base (mca_base_components_open.c). So we deleted those and just used the normal OPAL_* codes instead. While we were doing this, we also cleaned up a little memory management during ompi_info/orte-info/opal-info finalization. Valgrind still reports a truckload of memory still in use at ompi_info termination, but they mostly look to be components not freeing memory/resources properly (and outside the scope of this fix). This commit was SVN r27306. The following Trac tickets were found above: Ticket 3275 --> https://svn.open-mpi.org/trac/ompi/ticket/3275
2012-09-12 00:47:24 +04:00
void opal_info_show_path(const char *type, const char *value)
{
char *pretty, *path;
pretty = strdup(type);
pretty[0] = toupper(pretty[0]);
asprintf(&path, "path:%s", type);
opal_info_out(pretty, path, value);
free(pretty);
free(path);
}
void opal_info_do_path(bool want_all, opal_cmd_line_t *cmd_line)
{
int i, count;
char *scope;
/* Check bozo case */
count = opal_cmd_line_get_ninsts(cmd_line, "path");
for (i = 0; i < count; ++i) {
scope = opal_cmd_line_get_param(cmd_line, "path", i, 0);
if (0 == strcmp("all", scope)) {
want_all = true;
break;
}
}
if (want_all) {
opal_info_show_path(opal_info_path_prefix, opal_install_dirs.prefix);
opal_info_show_path(opal_info_path_exec_prefix, opal_install_dirs.exec_prefix);
opal_info_show_path(opal_info_path_bindir, opal_install_dirs.bindir);
opal_info_show_path(opal_info_path_sbindir, opal_install_dirs.sbindir);
opal_info_show_path(opal_info_path_libdir, opal_install_dirs.libdir);
opal_info_show_path(opal_info_path_incdir, opal_install_dirs.includedir);
opal_info_show_path(opal_info_path_mandir, opal_install_dirs.mandir);
opal_info_show_path(opal_info_path_pkglibdir, opal_install_dirs.opallibdir);
opal_info_show_path(opal_info_path_libexecdir, opal_install_dirs.libexecdir);
opal_info_show_path(opal_info_path_datarootdir, opal_install_dirs.datarootdir);
opal_info_show_path(opal_info_path_datadir, opal_install_dirs.datadir);
opal_info_show_path(opal_info_path_sysconfdir, opal_install_dirs.sysconfdir);
opal_info_show_path(opal_info_path_sharedstatedir, opal_install_dirs.sharedstatedir);
opal_info_show_path(opal_info_path_localstatedir, opal_install_dirs.localstatedir);
opal_info_show_path(opal_info_path_infodir, opal_install_dirs.infodir);
opal_info_show_path(opal_info_path_pkgdatadir, opal_install_dirs.opaldatadir);
opal_info_show_path(opal_info_path_pkglibdir, opal_install_dirs.opallibdir);
opal_info_show_path(opal_info_path_pkgincludedir, opal_install_dirs.opalincludedir);
} else {
count = opal_cmd_line_get_ninsts(cmd_line, "path");
for (i = 0; i < count; ++i) {
scope = opal_cmd_line_get_param(cmd_line, "path", i, 0);
if (0 == strcmp(opal_info_path_prefix, scope)) {
opal_info_show_path(opal_info_path_prefix, opal_install_dirs.prefix);
} else if (0 == strcmp(opal_info_path_bindir, scope)) {
opal_info_show_path(opal_info_path_bindir, opal_install_dirs.bindir);
} else if (0 == strcmp(opal_info_path_libdir, scope)) {
opal_info_show_path(opal_info_path_libdir, opal_install_dirs.libdir);
} else if (0 == strcmp(opal_info_path_incdir, scope)) {
opal_info_show_path(opal_info_path_incdir, opal_install_dirs.includedir);
} else if (0 == strcmp(opal_info_path_mandir, scope)) {
opal_info_show_path(opal_info_path_mandir, opal_install_dirs.mandir);
} else if (0 == strcmp(opal_info_path_pkglibdir, scope)) {
opal_info_show_path(opal_info_path_pkglibdir, opal_install_dirs.opallibdir);
} else if (0 == strcmp(opal_info_path_sysconfdir, scope)) {
opal_info_show_path(opal_info_path_sysconfdir, opal_install_dirs.sysconfdir);
} else if (0 == strcmp(opal_info_path_exec_prefix, scope)) {
opal_info_show_path(opal_info_path_exec_prefix, opal_install_dirs.exec_prefix);
} else if (0 == strcmp(opal_info_path_sbindir, scope)) {
opal_info_show_path(opal_info_path_sbindir, opal_install_dirs.sbindir);
} else if (0 == strcmp(opal_info_path_libexecdir, scope)) {
opal_info_show_path(opal_info_path_libexecdir, opal_install_dirs.libexecdir);
} else if (0 == strcmp(opal_info_path_datarootdir, scope)) {
opal_info_show_path(opal_info_path_datarootdir, opal_install_dirs.datarootdir);
} else if (0 == strcmp(opal_info_path_datadir, scope)) {
opal_info_show_path(opal_info_path_datadir, opal_install_dirs.datadir);
} else if (0 == strcmp(opal_info_path_sharedstatedir, scope)) {
opal_info_show_path(opal_info_path_sharedstatedir, opal_install_dirs.sharedstatedir);
} else if (0 == strcmp(opal_info_path_localstatedir, scope)) {
opal_info_show_path(opal_info_path_localstatedir, opal_install_dirs.localstatedir);
} else if (0 == strcmp(opal_info_path_infodir, scope)) {
opal_info_show_path(opal_info_path_infodir, opal_install_dirs.infodir);
} else if (0 == strcmp(opal_info_path_pkgdatadir, scope)) {
opal_info_show_path(opal_info_path_pkgdatadir, opal_install_dirs.opaldatadir);
} else if (0 == strcmp(opal_info_path_pkgincludedir, scope)) {
opal_info_show_path(opal_info_path_pkgincludedir, opal_install_dirs.opalincludedir);
} else {
char *usage = opal_cmd_line_get_usage_msg(cmd_line);
opal_show_help("help-opal_info.txt", "usage", true, usage);
free(usage);
exit(1);
}
}
}
}
void opal_info_do_params(bool want_all_in, bool want_internal,
opal_pointer_array_t *mca_types,
opal_cmd_line_t *opal_info_cmd_line)
{
mca_base_var_info_lvl_t max_level = OPAL_INFO_LVL_1;
int count;
char *type, *component, *str;
bool found;
int i;
bool want_all = false;
char *p;
if (opal_cmd_line_is_taken(opal_info_cmd_line, "param")) {
p = "param";
} else if (opal_cmd_line_is_taken(opal_info_cmd_line, "params")) {
p = "params";
} else {
p = "foo"; /* should never happen, but protect against segfault */
}
if (NULL != (str = opal_cmd_line_get_param (opal_info_cmd_line, "level", 0, 0))) {
char *tmp;
errno = 0;
max_level = strtol (str, &tmp, 10) + OPAL_INFO_LVL_1 - 1;
if (0 != errno || '\0' != tmp[0] || max_level < OPAL_INFO_LVL_1 || max_level > OPAL_INFO_LVL_9) {
char *usage = opal_cmd_line_get_usage_msg(opal_info_cmd_line);
opal_show_help("help-opal_info.txt", "invalid-level", true, str);
free(usage);
exit(1);
}
} else if (want_all_in) {
/* if not specified default to level 9 if all components are requested */
max_level = OPAL_INFO_LVL_9;
}
if (want_all_in) {
want_all = true;
} else {
Refs trac:3275. We ran into a case where the OMPI SVN trunk grew a new acceptable MCA parameter value, but this new value was not accepted on the v1.6 branch (hwloc_base_mem_bind_failure_action -- on the trunk it accepts the value "silent", but on the older v1.6 branch, it doesn't). If you set "hwloc_base_mem_bind_failure_action=silent" in the default MCA params file and then accidentally ran with the v1.6 branch, every OMPI executable (including ompi_info) just failed because hwloc_base_open() would say "hey, 'silent' is not a valid value for hwloc_base_mem_bind_failure_action!". Kaboom. The only problem is that it didn't give you any indication of where this value was being set. Quite maddening, from a user perspective. So we changed the ompi_info handles this case. If any framework open function return OMPI_ERR_BAD_PARAM (either because its base MCA params got a bad value or because one of its component register/open functions return OMPI_ERR_BAD_PARAM), ompi_info will stop, print out a warning that it received and error, and then dump out the parameters that it has received so far in the framework that had a problem. At a minimum, this will show the user the MCA param that had an error (it's usually the last one), and ''where it was set from'' (so that they can go fix it). We updated ompi_info to check for O???_ERR_BAD_PARAM from each from the framework opens. Also updated the doxygen docs in mca.h for this O???_BAD_PARAM behavior. And we noticed that mca.h had MCA_SUCCESS and MCA_ERR_??? codes. Why? I think we used them in exactly one place in the code base (mca_base_components_open.c). So we deleted those and just used the normal OPAL_* codes instead. While we were doing this, we also cleaned up a little memory management during ompi_info/orte-info/opal-info finalization. Valgrind still reports a truckload of memory still in use at ompi_info termination, but they mostly look to be components not freeing memory/resources properly (and outside the scope of this fix). This commit was SVN r27306. The following Trac tickets were found above: Ticket 3275 --> https://svn.open-mpi.org/trac/ompi/ticket/3275
2012-09-12 00:47:24 +04:00
/* See if the special param "all" was given to --param; that
* supercedes any individual type
*/
count = opal_cmd_line_get_ninsts(opal_info_cmd_line, p);
for (i = 0; i < count; ++i) {
type = opal_cmd_line_get_param(opal_info_cmd_line, p, (int)i, 0);
if (0 == strcmp(opal_info_type_all, type)) {
want_all = true;
break;
}
}
}
/* Show the params */
if (want_all) {
for (i = 0; i < mca_types->size; ++i) {
if (NULL == (type = (char *)opal_pointer_array_get_item(mca_types, i))) {
continue;
}
opal_info_show_mca_params(type, opal_info_component_all, max_level, want_internal);
}
} else {
for (i = 0; i < count; ++i) {
type = opal_cmd_line_get_param(opal_info_cmd_line, p, (int)i, 0);
component = opal_cmd_line_get_param(opal_info_cmd_line, p, (int)i, 1);
for (found = false, i = 0; i < mca_types->size; ++i) {
if (NULL == (str = (char *)opal_pointer_array_get_item(mca_types, i))) {
continue;
}
if (0 == strcmp(str, type)) {
found = true;
break;
}
}
if (!found) {
char *usage = opal_cmd_line_get_usage_msg(opal_info_cmd_line);
opal_show_help("help-opal_info.txt", "not-found", true, type);
free(usage);
exit(1);
}
opal_info_show_mca_params(type, component, max_level, want_internal);
}
}
}
Refs trac:3275. We ran into a case where the OMPI SVN trunk grew a new acceptable MCA parameter value, but this new value was not accepted on the v1.6 branch (hwloc_base_mem_bind_failure_action -- on the trunk it accepts the value "silent", but on the older v1.6 branch, it doesn't). If you set "hwloc_base_mem_bind_failure_action=silent" in the default MCA params file and then accidentally ran with the v1.6 branch, every OMPI executable (including ompi_info) just failed because hwloc_base_open() would say "hey, 'silent' is not a valid value for hwloc_base_mem_bind_failure_action!". Kaboom. The only problem is that it didn't give you any indication of where this value was being set. Quite maddening, from a user perspective. So we changed the ompi_info handles this case. If any framework open function return OMPI_ERR_BAD_PARAM (either because its base MCA params got a bad value or because one of its component register/open functions return OMPI_ERR_BAD_PARAM), ompi_info will stop, print out a warning that it received and error, and then dump out the parameters that it has received so far in the framework that had a problem. At a minimum, this will show the user the MCA param that had an error (it's usually the last one), and ''where it was set from'' (so that they can go fix it). We updated ompi_info to check for O???_ERR_BAD_PARAM from each from the framework opens. Also updated the doxygen docs in mca.h for this O???_BAD_PARAM behavior. And we noticed that mca.h had MCA_SUCCESS and MCA_ERR_??? codes. Why? I think we used them in exactly one place in the code base (mca_base_components_open.c). So we deleted those and just used the normal OPAL_* codes instead. While we were doing this, we also cleaned up a little memory management during ompi_info/orte-info/opal-info finalization. Valgrind still reports a truckload of memory still in use at ompi_info termination, but they mostly look to be components not freeing memory/resources properly (and outside the scope of this fix). This commit was SVN r27306. The following Trac tickets were found above: Ticket 3275 --> https://svn.open-mpi.org/trac/ompi/ticket/3275
2012-09-12 00:47:24 +04:00
void opal_info_err_params(opal_pointer_array_t *component_map)
{
opal_info_component_map_t *map=NULL, *mptr;
Refs trac:3275. We ran into a case where the OMPI SVN trunk grew a new acceptable MCA parameter value, but this new value was not accepted on the v1.6 branch (hwloc_base_mem_bind_failure_action -- on the trunk it accepts the value "silent", but on the older v1.6 branch, it doesn't). If you set "hwloc_base_mem_bind_failure_action=silent" in the default MCA params file and then accidentally ran with the v1.6 branch, every OMPI executable (including ompi_info) just failed because hwloc_base_open() would say "hey, 'silent' is not a valid value for hwloc_base_mem_bind_failure_action!". Kaboom. The only problem is that it didn't give you any indication of where this value was being set. Quite maddening, from a user perspective. So we changed the ompi_info handles this case. If any framework open function return OMPI_ERR_BAD_PARAM (either because its base MCA params got a bad value or because one of its component register/open functions return OMPI_ERR_BAD_PARAM), ompi_info will stop, print out a warning that it received and error, and then dump out the parameters that it has received so far in the framework that had a problem. At a minimum, this will show the user the MCA param that had an error (it's usually the last one), and ''where it was set from'' (so that they can go fix it). We updated ompi_info to check for O???_ERR_BAD_PARAM from each from the framework opens. Also updated the doxygen docs in mca.h for this O???_BAD_PARAM behavior. And we noticed that mca.h had MCA_SUCCESS and MCA_ERR_??? codes. Why? I think we used them in exactly one place in the code base (mca_base_components_open.c). So we deleted those and just used the normal OPAL_* codes instead. While we were doing this, we also cleaned up a little memory management during ompi_info/orte-info/opal-info finalization. Valgrind still reports a truckload of memory still in use at ompi_info termination, but they mostly look to be components not freeing memory/resources properly (and outside the scope of this fix). This commit was SVN r27306. The following Trac tickets were found above: Ticket 3275 --> https://svn.open-mpi.org/trac/ompi/ticket/3275
2012-09-12 00:47:24 +04:00
int i;
/* all we want to do is display the LAST entry in the
* component_map array as this is the one that generated the error
*/
for (i=0; i < component_map->size; i++) {
if (NULL == (mptr = (opal_info_component_map_t*)opal_pointer_array_get_item(component_map, i))) {
continue;
}
map = mptr;
}
if (NULL == map) {
fprintf(stderr, "opal_info_err_params: map not found\n");
return;
}
opal_info_show_mca_params(map->type, opal_info_component_all, OPAL_INFO_LVL_9, true);
Refs trac:3275. We ran into a case where the OMPI SVN trunk grew a new acceptable MCA parameter value, but this new value was not accepted on the v1.6 branch (hwloc_base_mem_bind_failure_action -- on the trunk it accepts the value "silent", but on the older v1.6 branch, it doesn't). If you set "hwloc_base_mem_bind_failure_action=silent" in the default MCA params file and then accidentally ran with the v1.6 branch, every OMPI executable (including ompi_info) just failed because hwloc_base_open() would say "hey, 'silent' is not a valid value for hwloc_base_mem_bind_failure_action!". Kaboom. The only problem is that it didn't give you any indication of where this value was being set. Quite maddening, from a user perspective. So we changed the ompi_info handles this case. If any framework open function return OMPI_ERR_BAD_PARAM (either because its base MCA params got a bad value or because one of its component register/open functions return OMPI_ERR_BAD_PARAM), ompi_info will stop, print out a warning that it received and error, and then dump out the parameters that it has received so far in the framework that had a problem. At a minimum, this will show the user the MCA param that had an error (it's usually the last one), and ''where it was set from'' (so that they can go fix it). We updated ompi_info to check for O???_ERR_BAD_PARAM from each from the framework opens. Also updated the doxygen docs in mca.h for this O???_BAD_PARAM behavior. And we noticed that mca.h had MCA_SUCCESS and MCA_ERR_??? codes. Why? I think we used them in exactly one place in the code base (mca_base_components_open.c). So we deleted those and just used the normal OPAL_* codes instead. While we were doing this, we also cleaned up a little memory management during ompi_info/orte-info/opal-info finalization. Valgrind still reports a truckload of memory still in use at ompi_info termination, but they mostly look to be components not freeing memory/resources properly (and outside the scope of this fix). This commit was SVN r27306. The following Trac tickets were found above: Ticket 3275 --> https://svn.open-mpi.org/trac/ompi/ticket/3275
2012-09-12 00:47:24 +04:00
fprintf(stderr, "\n");
return;
}
void opal_info_do_type(opal_cmd_line_t *opal_info_cmd_line)
{
mca_base_var_info_lvl_t max_level = OPAL_INFO_LVL_1;
int count;
char *type, *str;
int i, j, k, len, ret;
char *p;
const mca_base_var_t *var;
char** strings, *message;
const mca_base_var_group_t *group;
p = "type";
if (NULL != (str = opal_cmd_line_get_param (opal_info_cmd_line, "level", 0, 0))) {
char *tmp;
errno = 0;
max_level = strtol (str, &tmp, 10) + OPAL_INFO_LVL_1 - 1;
if (0 != errno || '\0' != tmp[0] || max_level < OPAL_INFO_LVL_1 || max_level > OPAL_INFO_LVL_9) {
char *usage = opal_cmd_line_get_usage_msg(opal_info_cmd_line);
opal_show_help("help-opal_info.txt", "invalid-level", true, str);
free(usage);
exit(1);
}
}
count = opal_cmd_line_get_ninsts(opal_info_cmd_line, p);
len = mca_base_var_get_count ();
for (k = 0; k < count; ++k) {
type = opal_cmd_line_get_param(opal_info_cmd_line, p, k, 0);
for (i = 0; i < len; ++i) {
ret = mca_base_var_get (i, &var);
if (OPAL_SUCCESS != ret) {
continue;
}
if (0 == strcmp(type, var_type_names[var->mbv_type]) && (var->mbv_info_lvl <= max_level)) {
ret = mca_base_var_dump(var->mbv_index, &strings, !opal_info_pretty ? MCA_BASE_VAR_DUMP_PARSABLE : MCA_BASE_VAR_DUMP_READABLE);
if (OPAL_SUCCESS != ret) {
continue;
}
(void) mca_base_var_group_get(var->mbv_group_index, &group);
for (j = 0 ; strings[j] ; ++j) {
if (0 == j && opal_info_pretty) {
asprintf (&message, "MCA %s", group->group_framework);
opal_info_out(message, message, strings[j]);
free(message);
} else {
opal_info_out("", "", strings[j]);
}
free(strings[j]);
}
free(strings);
}
}
}
}
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-28 01:09:41 +04:00
static void opal_info_show_mca_group_params(const mca_base_var_group_t *group, mca_base_var_info_lvl_t max_level, bool want_internal)
{
const int *variables, *groups;
const mca_base_pvar_t *pvar;
const char *group_component;
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-28 01:09:41 +04:00
const mca_base_var_t *var;
char **strings, *message;
bool requested = true;
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-28 01:09:41 +04:00
int ret, i, j, count;
variables = OPAL_VALUE_ARRAY_GET_BASE(&group->group_vars, const int);
count = opal_value_array_get_size((opal_value_array_t *)&group->group_vars);
/* the default component name is "base". depending on how the
* group was registered the group may or not have this set. */
group_component = group->group_component ? group->group_component : "base";
/* check if this group may be disabled due to a selection variable */
if (0 != strcmp (group_component, "base")) {
int var_id;
/* read the selection parameter */
var_id = mca_base_var_find (group->group_project, group->group_framework, NULL, NULL);
if (0 <= var_id) {
const mca_base_var_storage_t *value;
char **requested_components;
bool include_mode;
mca_base_var_get_value (var_id, &value, NULL, NULL);
if (NULL != value->stringval && '\0' != value->stringval[0]) {
mca_base_component_parse_requested (value->stringval, &include_mode, &requested_components);
for (i = 0, requested = !include_mode ; requested_components[i] ; ++i) {
if (0 == strcmp (requested_components[i], group_component)) {
requested = include_mode;
break;
}
}
opal_argv_free (requested_components);
}
}
}
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-28 01:09:41 +04:00
for (i = 0 ; i < count ; ++i) {
ret = mca_base_var_get(variables[i], &var);
if (OPAL_SUCCESS != ret || ((var->mbv_flags & MCA_BASE_VAR_FLAG_INTERNAL) &&
!want_internal) ||
max_level < var->mbv_info_lvl) {
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-28 01:09:41 +04:00
continue;
}
ret = mca_base_var_dump(variables[i], &strings, !opal_info_pretty ? MCA_BASE_VAR_DUMP_PARSABLE : MCA_BASE_VAR_DUMP_READABLE);
if (OPAL_SUCCESS != ret) {
continue;
}
for (j = 0 ; strings[j] ; ++j) {
if (0 == j && opal_info_pretty) {
asprintf (&message, "MCA%s %s", requested ? "" : " (disabled)", group->group_framework);
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-28 01:09:41 +04:00
opal_info_out(message, message, strings[j]);
free(message);
} else {
opal_info_out("", "", strings[j]);
}
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-28 01:09:41 +04:00
free(strings[j]);
}
if (!opal_info_pretty) {
/* generate an entry indicating whether this variable is disabled or not. if the
* format in mca_base_var/pvar.c changes this needs to be changed as well */
asprintf (&message, "mca:%s:%s:param:%s:disabled:%s", group->group_framework,
group_component, var->mbv_full_name, requested ? "false" : "true");
opal_info_out("", "", message);
free (message);
}
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-28 01:09:41 +04:00
free(strings);
}
variables = OPAL_VALUE_ARRAY_GET_BASE(&group->group_pvars, const int);
count = opal_value_array_get_size((opal_value_array_t *)&group->group_pvars);
for (i = 0 ; i < count ; ++i) {
ret = mca_base_pvar_get(variables[i], &pvar);
if (OPAL_SUCCESS != ret || max_level < pvar->verbosity) {
continue;
}
ret = mca_base_pvar_dump (variables[i], &strings, !opal_info_pretty ? MCA_BASE_VAR_DUMP_PARSABLE : MCA_BASE_VAR_DUMP_READABLE);
if (OPAL_SUCCESS != ret) {
continue;
}
for (j = 0 ; strings[j] ; ++j) {
if (0 == j && opal_info_pretty) {
asprintf (&message, "MCA%s %s", requested ? "" : " (disabled)", group->group_framework);
opal_info_out(message, message, strings[j]);
free(message);
} else {
opal_info_out("", "", strings[j]);
}
free(strings[j]);
}
if (!opal_info_pretty) {
/* generate an entry indicating whether this variable is disabled or not. if the
* format in mca_base_var/pvar.c changes this needs to be changed as well */
asprintf (&message, "mca:%s:%s:pvar:%s:disabled:%s", group->group_framework,
group_component, pvar->name, requested ? "false" : "true");
opal_info_out("", "", message);
free (message);
}
free(strings);
}
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-28 01:09:41 +04:00
groups = OPAL_VALUE_ARRAY_GET_BASE(&group->group_subgroups, const int);
count = opal_value_array_get_size((opal_value_array_t *)&group->group_subgroups);
for (i = 0 ; i < count ; ++i) {
ret = mca_base_var_group_get(groups[i], &group);
if (OPAL_SUCCESS != ret) {
continue;
}
opal_info_show_mca_group_params(group, max_level, want_internal);
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-28 01:09:41 +04:00
}
}
void opal_info_show_mca_params(const char *type, const char *component,
mca_base_var_info_lvl_t max_level, bool want_internal)
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-28 01:09:41 +04:00
{
const mca_base_var_group_t *group;
int ret;
if (0 == strcmp (component, "all")) {
ret = mca_base_var_group_find("*", type, NULL);
if (0 > ret) {
return;
}
(void) mca_base_var_group_get(ret, &group);
opal_info_show_mca_group_params(group, max_level, want_internal);
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-28 01:09:41 +04:00
} else {
ret = mca_base_var_group_find("*", type, component);
if (0 > ret) {
return;
}
(void) mca_base_var_group_get(ret, &group);
opal_info_show_mca_group_params(group, max_level, want_internal);
}
}
void opal_info_do_arch()
{
opal_info_out("Configured architecture", "config:arch", OPAL_ARCH);
}
void opal_info_do_hostname()
{
opal_info_out("Configure host", "config:host", OPAL_CONFIGURE_HOST);
}
static char *escape_quotes(const char *value)
{
const char *src;
int num_quotes = 0;
for (src = value; src != NULL && *src != '\0'; ++src) {
if ('"' == *src) {
++num_quotes;
}
}
// If there are no quotes in the string, there's nothing to do
if (0 == num_quotes) {
return NULL;
}
// If we have quotes, make a new string. Copy over the old
// string, escaping the quotes along the way. This is simple and
// clear to read; it's not particularly efficient (performance is
// definitely not important here).
char *quoted_value;
quoted_value = calloc(1, strlen(value) + num_quotes + 1);
if (NULL == quoted_value) {
return NULL;
}
char *dest;
for (src = value, dest = quoted_value; *src != '\0'; ++src, ++dest) {
if ('"' == *src) {
*dest++ = '\\';
}
*dest = *src;
}
return quoted_value;
}
/*
* Private variables - set some reasonable screen size defaults
*/
static int centerpoint = 24;
static int screen_width = 78;
/*
* Prints the passed integer in a pretty or parsable format.
*/
void opal_info_out(const char *pretty_message, const char *plain_message, const char *value)
{
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-28 01:09:41 +04:00
size_t len, max_value_width, value_offset;
char *spaces = NULL;
char *filler = NULL;
char *pos, *v, savev, *v_to_free;
#ifdef HAVE_ISATTY
/* If we have isatty(), if this is not a tty, then disable
* wrapping for grep-friendly behavior
*/
if (0 == isatty(STDOUT_FILENO)) {
screen_width = INT_MAX;
}
#endif
#ifdef TIOCGWINSZ
if (screen_width < INT_MAX) {
struct winsize size;
if (ioctl(STDOUT_FILENO, TIOCGWINSZ, (char*) &size) >= 0) {
screen_width = size.ws_col;
}
}
#endif
/* Sanity check (allow NULL to mean "") */
if (NULL == value) {
value = "";
}
/* Strip leading and trailing whitespace from the string value */
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-28 01:09:41 +04:00
value_offset = strspn(value, " ");
v = v_to_free = strdup(value + value_offset);
len = strlen(v);
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-28 01:09:41 +04:00
if (len > 0) {
while (len > 0 && isspace(v[len-1])) len--;
v[len] = '\0';
}
if (opal_info_pretty && NULL != pretty_message) {
if (centerpoint > (int)strlen(pretty_message)) {
asprintf(&spaces, "%*s", centerpoint -
(int)strlen(pretty_message), " ");
} else {
spaces = strdup("");
#if OPAL_ENABLE_DEBUG
if (centerpoint < (int)strlen(pretty_message)) {
opal_show_help("help-opal_info.txt",
"developer warning: field too long", false,
pretty_message, centerpoint);
}
#endif
}
max_value_width = screen_width - strlen(spaces) - strlen(pretty_message) - 2;
if (0 < strlen(pretty_message)) {
asprintf(&filler, "%s%s: ", spaces, pretty_message);
} else {
asprintf(&filler, "%s ", spaces);
}
free(spaces);
spaces = NULL;
while (true) {
if (strlen(v) < max_value_width) {
printf("%s%s\n", filler, v);
break;
} else {
asprintf(&spaces, "%*s", centerpoint + 2, " ");
/* Work backwards to find the first space before
* max_value_width
*/
savev = v[max_value_width];
v[max_value_width] = '\0';
pos = (char*)strrchr(v, (int)' ');
v[max_value_width] = savev;
if (NULL == pos) {
/* No space found < max_value_width. Look for the first
* space after max_value_width.
*/
pos = strchr(&v[max_value_width], ' ');
if (NULL == pos) {
/* There's just no spaces. So just print it and be done. */
printf("%s%s\n", filler, v);
break;
} else {
*pos = '\0';
printf("%s%s\n", filler, v);
v = pos + 1;
}
} else {
*pos = '\0';
printf("%s%s\n", filler, v);
v = pos + 1;
}
/* Reset for the next iteration */
free(filler);
filler = strdup(spaces);
free(spaces);
spaces = NULL;
}
}
if (NULL != filler) {
free(filler);
}
if (NULL != spaces) {
free(spaces);
}
} else {
if (NULL != plain_message && 0 < strlen(plain_message)) {
// Escape any double quotes in the value.
char *quoted_value;
quoted_value = escape_quotes(value);
if (NULL != quoted_value) {
value = quoted_value;
}
char *colon = strchr(value, ':');
if (NULL != colon) {
printf("%s:\"%s\"\n", plain_message, value);
} else {
printf("%s:%s\n", plain_message, value);
}
if (NULL != quoted_value) {
free(quoted_value);
}
} else {
MCA/base: Add new MCA variable system Features: - Support for an override parameter file (openmpi-mca-param-override.conf). Variable values in this file can not be overridden by any file or environment value. - Support for boolean, unsigned, and unsigned long long variables. - Support for true/false values. - Support for enumerations on integer variables. - Support for MPIT scope, verbosity, and binding. - Support for command line source. - Support for setting variable source via the environment using OMPI_MCA_SOURCE_<var name>=source (either command or file:filename) - Cleaner API. - Support for variable groups (equivalent to MPIT categories). Notes: - Variables must be created with a backing store (char **, int *, or bool *) that must live at least as long as the variable. - Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of mca_base_var_set_value() to change the value. - String values are duplicated when the variable is registered. It is up to the caller to free the original value if necessary. The new value will be freed by the mca_base_var system and must not be freed by the user. - Variables with constant scope may not be settable. - Variable groups (and all associated variables) are deregistered when the component is closed or the component repository item is freed. This prevents a segmentation fault from accessing a variable after its component is unloaded. - After some discussion we decided we should remove the automatic registration of component priority variables. Few component actually made use of this feature. - The enumerator interface was updated to be general enough to handle future uses of the interface. - The code to generate ompi_info output has been moved into the MCA variable system. See mca_base_var_dump(). opal: update core and components to mca_base_var system orte: update core and components to mca_base_var system ompi: update core and components to mca_base_var system This commit also modifies the rmaps framework. The following variables were moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode, rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables. This commit was SVN r28236.
2013-03-28 01:09:41 +04:00
printf("%s\n", value);
}
}
if (NULL != v_to_free) {
free(v_to_free);
}
}
void opal_info_out_int(const char *pretty_message,
const char *plain_message,
int value)
{
char *valstr;
asprintf(&valstr, "%d", (int)value);
opal_info_out(pretty_message, plain_message, valstr);
free(valstr);
}
/*
* Show all the components of a specific type/component combo (component may be
* a wildcard)
*/
void opal_info_show_component_version(opal_pointer_array_t *mca_types,
opal_pointer_array_t *component_map,
const char *type_name,
const char *component_name,
const char *scope, const char *ver_type)
{
bool want_all_components = false;
bool want_all_types = false;
bool found;
mca_base_component_list_item_t *cli;
int j;
char *pos;
opal_info_component_map_t *map;
/* see if all components wanted */
if (0 == strcmp(opal_info_component_all, component_name)) {
want_all_components = true;
}
/* see if all types wanted */
if (0 != strcmp(opal_info_type_all, type_name)) {
/* Check to see if the type is valid */
for (found = false, j = 0; j < mca_types->size; ++j) {
if (NULL == (pos = (char*)opal_pointer_array_get_item(mca_types, j))) {
continue;
}
if (0 == strcmp(pos, type_name)) {
found = true;
break;
}
}
if (!found) {
return;
}
} else {
want_all_types = true;
}
/* Now that we have a valid type, find the right components */
for (j=0; j < component_map->size; j++) {
if (NULL == (map = (opal_info_component_map_t*)opal_pointer_array_get_item(component_map, j))) {
continue;
}
if ((want_all_types || 0 == strcmp(type_name, map->type)) && map->components) {
/* found it! */
OPAL_LIST_FOREACH(cli, map->components, mca_base_component_list_item_t) {
const mca_base_component_t *component = cli->cli_component;
if (want_all_components ||
0 == strcmp(component->mca_component_name, component_name)) {
opal_info_show_mca_version(component, scope, ver_type);
}
}
if (!want_all_types) {
break;
}
}
}
}
/*
* Given a component, display its relevant version(s)
*/
void opal_info_show_mca_version(const mca_base_component_t* component,
const char *scope, const char *ver_type)
{
bool printed;
bool want_mca = false;
bool want_type = false;
bool want_component = false;
char *message, *content;
char *mca_version;
char *api_version;
char *component_version;
char *tmp;
if (0 == strcmp(ver_type, opal_info_ver_all) ||
0 == strcmp(ver_type, opal_info_ver_mca)) {
want_mca = true;
}
if (0 == strcmp(ver_type, opal_info_ver_all) ||
0 == strcmp(ver_type, opal_info_ver_type)) {
want_type = true;
}
if (0 == strcmp(ver_type, opal_info_ver_all) ||
0 == strcmp(ver_type, opal_info_ver_component)) {
want_component = true;
}
mca_version = opal_info_make_version_str(scope, component->mca_major_version,
component->mca_minor_version,
component->mca_release_version, "",
"");
api_version = opal_info_make_version_str(scope, component->mca_type_major_version,
component->mca_type_minor_version,
component->mca_type_release_version, "",
"");
component_version = opal_info_make_version_str(scope, component->mca_component_major_version,
component->mca_component_minor_version,
component->mca_component_release_version,
"", "");
if (opal_info_pretty) {
asprintf(&message, "MCA %s", component->mca_type_name);
printed = false;
asprintf(&content, "%s (", component->mca_component_name);
if (want_mca) {
asprintf(&tmp, "%sMCA v%s", content, mca_version);
free(content);
content = tmp;
printed = true;
}
if (want_type) {
if (printed) {
asprintf(&tmp, "%s, ", content);
free(content);
content = tmp;
}
asprintf(&tmp, "%sAPI v%s", content, api_version);
free(content);
content = tmp;
printed = true;
}
if (want_component) {
if (printed) {
asprintf(&tmp, "%s, ", content);
free(content);
content = tmp;
}
asprintf(&tmp, "%sComponent v%s", content, component_version);
free(content);
content = tmp;
printed = true;
}
if (NULL != content) {
asprintf(&tmp, "%s)", content);
free(content);
} else {
tmp = NULL;
}
opal_info_out(message, NULL, tmp);
free(message);
if (NULL != tmp) {
free(tmp);
}
} else {
asprintf(&message, "mca:%s:%s:version", component->mca_type_name, component->mca_component_name);
if (want_mca) {
asprintf(&tmp, "mca:%s", mca_version);
opal_info_out(NULL, message, tmp);
free(tmp);
}
if (want_type) {
asprintf(&tmp, "api:%s", api_version);
opal_info_out(NULL, message, tmp);
free(tmp);
}
if (want_component) {
asprintf(&tmp, "component:%s", component_version);
opal_info_out(NULL, message, tmp);
free(tmp);
}
free(message);
}
if (NULL != mca_version) {
free(mca_version);
}
if (NULL != api_version) {
free(api_version);
}
if (NULL != component_version) {
free(component_version);
}
}
char *opal_info_make_version_str(const char *scope,
int major, int minor, int release,
const char *greek,
const char *repo)
{
char *str = NULL, *tmp;
char temp[BUFSIZ];
temp[BUFSIZ - 1] = '\0';
if (0 == strcmp(scope, opal_info_ver_full) ||
0 == strcmp(scope, opal_info_ver_all)) {
snprintf(temp, BUFSIZ - 1, "%d.%d.%d", major, minor, release);
str = strdup(temp);
if (NULL != greek) {
asprintf(&tmp, "%s%s", str, greek);
free(str);
str = tmp;
}
} else if (0 == strcmp(scope, opal_info_ver_major)) {
snprintf(temp, BUFSIZ - 1, "%d", major);
} else if (0 == strcmp(scope, opal_info_ver_minor)) {
snprintf(temp, BUFSIZ - 1, "%d", minor);
} else if (0 == strcmp(scope, opal_info_ver_release)) {
snprintf(temp, BUFSIZ - 1, "%d", release);
} else if (0 == strcmp(scope, opal_info_ver_greek)) {
str = strdup(greek);
} else if (0 == strcmp(scope, opal_info_ver_repo)) {
str = strdup(repo);
}
if (NULL == str) {
str = strdup(temp);
}
return str;
}
void opal_info_show_opal_version(const char *scope)
{
char *tmp, *tmp2;
asprintf(&tmp, "%s:version:full", opal_info_type_opal);
tmp2 = opal_info_make_version_str(scope,
OPAL_MAJOR_VERSION, OPAL_MINOR_VERSION,
OPAL_RELEASE_VERSION,
OPAL_GREEK_VERSION,
OPAL_REPO_REV);
opal_info_out("OPAL", tmp, tmp2);
free(tmp);
free(tmp2);
asprintf(&tmp, "%s:version:repo", opal_info_type_opal);
opal_info_out("OPAL repo revision", tmp, OPAL_REPO_REV);
free(tmp);
asprintf(&tmp, "%s:version:release_date", opal_info_type_opal);
opal_info_out("OPAL release date", tmp, OPAL_RELEASE_DATE);
free(tmp);
}