1
1
openmpi/ompi/mpi/fortran/mpif-h/attr_get_f.c

87 строки
3.3 KiB
C
Исходник Обычный вид История

/*
* Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
* University Research and Technology
* Corporation. All rights reserved.
* Copyright (c) 2004-2005 The University of Tennessee and The University
* of Tennessee Research Foundation. All rights
* reserved.
* Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
* University of Stuttgart. All rights reserved.
* Copyright (c) 2004-2005 The Regents of the University of California.
* All rights reserved.
== Highlights == 1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler 1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release 1. The mpi module has been re-implemented and is significantly "mo' bettah" 1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk. == More details == Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7. Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey: * Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort) * The Fortran J3 committee * Tobias Burnus/gfortran * Tony !Goetz/Absoft * Terry !Donte/Oracle * ...and probably others whom I'm forgetting :-( There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax. Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time. As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory: {{{ ompi/mpi/fortran/ base/ - glue code mpif-h/ - what used to be ompi/mpi/f77 use-mpi-tkr/ - what used to be ompi/mpi/f90 use-mpi-ignore-tkr/ - new mpi module implementation use-mpi-f08/ - new mpi_f08 module implementation }}} There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version. Other things that were done: * ompi_info grew a few new output fields to describe what level of Fortran support is included * Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added * The old Fortran MPI libraries were renamed: * libmpi_f77 -> libmpi_mpifh * libmpi_f90 -> libmpi_usempi * The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example: {{{ shell$ ./configure CC=icc CXX=icpc FC=ifort ... }}} All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches). I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed. This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
* Copyright (c) 2011-2012 Cisco Systems, Inc. All rights reserved.
* $COPYRIGHT$
*
* Additional copyrights may follow
*
* $HEADER$
*/
#include "ompi_config.h"
== Highlights == 1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler 1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release 1. The mpi module has been re-implemented and is significantly "mo' bettah" 1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk. == More details == Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7. Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey: * Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort) * The Fortran J3 committee * Tobias Burnus/gfortran * Tony !Goetz/Absoft * Terry !Donte/Oracle * ...and probably others whom I'm forgetting :-( There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax. Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time. As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory: {{{ ompi/mpi/fortran/ base/ - glue code mpif-h/ - what used to be ompi/mpi/f77 use-mpi-tkr/ - what used to be ompi/mpi/f90 use-mpi-ignore-tkr/ - new mpi module implementation use-mpi-f08/ - new mpi_f08 module implementation }}} There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version. Other things that were done: * ompi_info grew a few new output fields to describe what level of Fortran support is included * Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added * The old Fortran MPI libraries were renamed: * libmpi_f77 -> libmpi_mpifh * libmpi_f90 -> libmpi_usempi * The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example: {{{ shell$ ./configure CC=icc CXX=icpc FC=ifort ... }}} All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches). I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed. This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
#include "ompi/mpi/fortran/mpif-h/bindings.h"
#include "ompi/attribute/attribute.h"
#include "ompi/communicator/communicator.h"
#if OPAL_HAVE_WEAK_SYMBOLS && OMPI_PROFILE_LAYER
== Highlights == 1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler 1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release 1. The mpi module has been re-implemented and is significantly "mo' bettah" 1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk. == More details == Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7. Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey: * Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort) * The Fortran J3 committee * Tobias Burnus/gfortran * Tony !Goetz/Absoft * Terry !Donte/Oracle * ...and probably others whom I'm forgetting :-( There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax. Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time. As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory: {{{ ompi/mpi/fortran/ base/ - glue code mpif-h/ - what used to be ompi/mpi/f77 use-mpi-tkr/ - what used to be ompi/mpi/f90 use-mpi-ignore-tkr/ - new mpi module implementation use-mpi-f08/ - new mpi_f08 module implementation }}} There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version. Other things that were done: * ompi_info grew a few new output fields to describe what level of Fortran support is included * Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added * The old Fortran MPI libraries were renamed: * libmpi_f77 -> libmpi_mpifh * libmpi_f90 -> libmpi_usempi * The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example: {{{ shell$ ./configure CC=icc CXX=icpc FC=ifort ... }}} All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches). I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed. This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
#pragma weak PMPI_ATTR_GET = ompi_attr_get_f
#pragma weak pmpi_attr_get = ompi_attr_get_f
#pragma weak pmpi_attr_get_ = ompi_attr_get_f
#pragma weak pmpi_attr_get__ = ompi_attr_get_f
#pragma weak PMPI_Attr_get_f = ompi_attr_get_f
#pragma weak PMPI_Attr_get_f08 = ompi_attr_get_f
#elif OMPI_PROFILE_LAYER
OMPI_GENERATE_F77_BINDINGS (PMPI_ATTR_GET,
pmpi_attr_get,
pmpi_attr_get_,
pmpi_attr_get__,
== Highlights == 1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler 1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release 1. The mpi module has been re-implemented and is significantly "mo' bettah" 1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk. == More details == Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7. Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey: * Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort) * The Fortran J3 committee * Tobias Burnus/gfortran * Tony !Goetz/Absoft * Terry !Donte/Oracle * ...and probably others whom I'm forgetting :-( There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax. Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time. As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory: {{{ ompi/mpi/fortran/ base/ - glue code mpif-h/ - what used to be ompi/mpi/f77 use-mpi-tkr/ - what used to be ompi/mpi/f90 use-mpi-ignore-tkr/ - new mpi module implementation use-mpi-f08/ - new mpi_f08 module implementation }}} There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version. Other things that were done: * ompi_info grew a few new output fields to describe what level of Fortran support is included * Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added * The old Fortran MPI libraries were renamed: * libmpi_f77 -> libmpi_mpifh * libmpi_f90 -> libmpi_usempi * The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example: {{{ shell$ ./configure CC=icc CXX=icpc FC=ifort ... }}} All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches). I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed. This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
pompi_attr_get_f,
(MPI_Fint *comm, MPI_Fint *keyval, MPI_Fint *attribute_val, ompi_fortran_logical_t *flag, MPI_Fint *ierr),
(comm, keyval, attribute_val, flag, ierr) )
#endif
#if OPAL_HAVE_WEAK_SYMBOLS
== Highlights == 1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler 1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release 1. The mpi module has been re-implemented and is significantly "mo' bettah" 1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk. == More details == Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7. Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey: * Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort) * The Fortran J3 committee * Tobias Burnus/gfortran * Tony !Goetz/Absoft * Terry !Donte/Oracle * ...and probably others whom I'm forgetting :-( There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax. Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time. As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory: {{{ ompi/mpi/fortran/ base/ - glue code mpif-h/ - what used to be ompi/mpi/f77 use-mpi-tkr/ - what used to be ompi/mpi/f90 use-mpi-ignore-tkr/ - new mpi module implementation use-mpi-f08/ - new mpi_f08 module implementation }}} There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version. Other things that were done: * ompi_info grew a few new output fields to describe what level of Fortran support is included * Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added * The old Fortran MPI libraries were renamed: * libmpi_f77 -> libmpi_mpifh * libmpi_f90 -> libmpi_usempi * The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example: {{{ shell$ ./configure CC=icc CXX=icpc FC=ifort ... }}} All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches). I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed. This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
#pragma weak MPI_ATTR_GET = ompi_attr_get_f
#pragma weak mpi_attr_get = ompi_attr_get_f
#pragma weak mpi_attr_get_ = ompi_attr_get_f
#pragma weak mpi_attr_get__ = ompi_attr_get_f
#pragma weak MPI_Attr_get_f = ompi_attr_get_f
#pragma weak MPI_Attr_get_f08 = ompi_attr_get_f
#endif
#if ! OPAL_HAVE_WEAK_SYMBOLS && ! OMPI_PROFILE_LAYER
OMPI_GENERATE_F77_BINDINGS (MPI_ATTR_GET,
mpi_attr_get,
mpi_attr_get_,
mpi_attr_get__,
== Highlights == 1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler 1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release 1. The mpi module has been re-implemented and is significantly "mo' bettah" 1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk. == More details == Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7. Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey: * Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort) * The Fortran J3 committee * Tobias Burnus/gfortran * Tony !Goetz/Absoft * Terry !Donte/Oracle * ...and probably others whom I'm forgetting :-( There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax. Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time. As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory: {{{ ompi/mpi/fortran/ base/ - glue code mpif-h/ - what used to be ompi/mpi/f77 use-mpi-tkr/ - what used to be ompi/mpi/f90 use-mpi-ignore-tkr/ - new mpi module implementation use-mpi-f08/ - new mpi_f08 module implementation }}} There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version. Other things that were done: * ompi_info grew a few new output fields to describe what level of Fortran support is included * Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added * The old Fortran MPI libraries were renamed: * libmpi_f77 -> libmpi_mpifh * libmpi_f90 -> libmpi_usempi * The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example: {{{ shell$ ./configure CC=icc CXX=icpc FC=ifort ... }}} All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches). I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed. This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
ompi_attr_get_f,
(MPI_Fint *comm, MPI_Fint *keyval, MPI_Fint *attribute_val, ompi_fortran_logical_t *flag, MPI_Fint *ierr),
(comm, keyval, attribute_val, flag, ierr) )
#endif
#if OMPI_PROFILE_LAYER && ! OPAL_HAVE_WEAK_SYMBOLS
== Highlights == 1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler 1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release 1. The mpi module has been re-implemented and is significantly "mo' bettah" 1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk. == More details == Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7. Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey: * Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort) * The Fortran J3 committee * Tobias Burnus/gfortran * Tony !Goetz/Absoft * Terry !Donte/Oracle * ...and probably others whom I'm forgetting :-( There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax. Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time. As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory: {{{ ompi/mpi/fortran/ base/ - glue code mpif-h/ - what used to be ompi/mpi/f77 use-mpi-tkr/ - what used to be ompi/mpi/f90 use-mpi-ignore-tkr/ - new mpi module implementation use-mpi-f08/ - new mpi_f08 module implementation }}} There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version. Other things that were done: * ompi_info grew a few new output fields to describe what level of Fortran support is included * Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added * The old Fortran MPI libraries were renamed: * libmpi_f77 -> libmpi_mpifh * libmpi_f90 -> libmpi_usempi * The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example: {{{ shell$ ./configure CC=icc CXX=icpc FC=ifort ... }}} All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches). I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed. This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
#include "ompi/mpi/fortran/mpif-h/profile/defines.h"
#endif
== Highlights == 1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler 1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release 1. The mpi module has been re-implemented and is significantly "mo' bettah" 1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk. == More details == Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7. Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey: * Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort) * The Fortran J3 committee * Tobias Burnus/gfortran * Tony !Goetz/Absoft * Terry !Donte/Oracle * ...and probably others whom I'm forgetting :-( There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax. Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time. As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory: {{{ ompi/mpi/fortran/ base/ - glue code mpif-h/ - what used to be ompi/mpi/f77 use-mpi-tkr/ - what used to be ompi/mpi/f90 use-mpi-ignore-tkr/ - new mpi module implementation use-mpi-f08/ - new mpi_f08 module implementation }}} There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version. Other things that were done: * ompi_info grew a few new output fields to describe what level of Fortran support is included * Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added * The old Fortran MPI libraries were renamed: * libmpi_f77 -> libmpi_mpifh * libmpi_f90 -> libmpi_usempi * The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example: {{{ shell$ ./configure CC=icc CXX=icpc FC=ifort ... }}} All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches). I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed. This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
void ompi_attr_get_f(MPI_Fint *comm, MPI_Fint *keyval,
MPI_Fint *attribute_val, ompi_fortran_logical_t *flag, MPI_Fint *ierr)
{
== Highlights == 1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler 1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release 1. The mpi module has been re-implemented and is significantly "mo' bettah" 1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk. == More details == Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7. Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey: * Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort) * The Fortran J3 committee * Tobias Burnus/gfortran * Tony !Goetz/Absoft * Terry !Donte/Oracle * ...and probably others whom I'm forgetting :-( There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax. Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time. As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory: {{{ ompi/mpi/fortran/ base/ - glue code mpif-h/ - what used to be ompi/mpi/f77 use-mpi-tkr/ - what used to be ompi/mpi/f90 use-mpi-ignore-tkr/ - new mpi module implementation use-mpi-f08/ - new mpi_f08 module implementation }}} There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version. Other things that were done: * ompi_info grew a few new output fields to describe what level of Fortran support is included * Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added * The old Fortran MPI libraries were renamed: * libmpi_f77 -> libmpi_mpifh * libmpi_f90 -> libmpi_usempi * The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example: {{{ shell$ ./configure CC=icc CXX=icpc FC=ifort ... }}} All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches). I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed. This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
int c_ierr;
Submitted by: Jeff "I love MPI attributes" Squyres Reviewed by: Brian "MPI attributes ROCK" Barrett Bunches of changes to the attribute engine: - After many hours of discussion about MPI attributes, we came to the conclusion that MPI-2 Example 4.13 (the C->Fortran example) is just wrong. If you accept that, the rest of the text makes much more sense. - There are 9 inter-language cases: all combinations of (read, write) with C, Fortran MPI-1, and Fortran MPI-2 for each value. Each of the 9 cases have specific code for what is supposed to happen (and is labeled in the code with comments). There is a *lengthy* comment at the top of src/attribute/attribute.c that describes all of this. - All predefined attributes are now treated as if they were put from MPI-1 Fortran calls, with the exception of the window predefined attributes (which are irrelevant on the beta, because there is no one-sided support; preliminary fixes included in this patch, but will be fully addressed on the trunk) - MPI API calls (particularly the Fortran wrappers) are now fundamentally simpler -- they do *not* call the back-end MPI C API calls; instead, they call directly back into the attribute engine. - The MPI_LASTUSEDCODE attribute only exists on MPI_COMM_WORLD and is updated appropriately when user error classes are added. --> Note: Edgar made a suggestion that for communicator attributes, we ignore the communicator argument when retrieving attributes and simply return the value. This will likely only happen on the trunk, and will alleviate (from the user's perspective) the restriction that LASTUSEDCODE is only on MPI_COMM_WORLD. - The predefined attributes are now "better". We create keyvals separately than assigning values, and correctly distinguish between comm, type, and win attributes. Initial values are now set as if they were called from MPI-1 fortran. - Added a comment to the top of src/attribute/attribute_predefined.c explaining what each of the predefined attributes were and what OMPI sets them to be. This commit was SVN r6193.
2005-06-27 23:17:11 +04:00
MPI_Comm c_comm = MPI_Comm_f2c(*comm);
OMPI_LOGICAL_NAME_DECL(flag);
Submitted by: Jeff "I love MPI attributes" Squyres Reviewed by: Brian "MPI attributes ROCK" Barrett Bunches of changes to the attribute engine: - After many hours of discussion about MPI attributes, we came to the conclusion that MPI-2 Example 4.13 (the C->Fortran example) is just wrong. If you accept that, the rest of the text makes much more sense. - There are 9 inter-language cases: all combinations of (read, write) with C, Fortran MPI-1, and Fortran MPI-2 for each value. Each of the 9 cases have specific code for what is supposed to happen (and is labeled in the code with comments). There is a *lengthy* comment at the top of src/attribute/attribute.c that describes all of this. - All predefined attributes are now treated as if they were put from MPI-1 Fortran calls, with the exception of the window predefined attributes (which are irrelevant on the beta, because there is no one-sided support; preliminary fixes included in this patch, but will be fully addressed on the trunk) - MPI API calls (particularly the Fortran wrappers) are now fundamentally simpler -- they do *not* call the back-end MPI C API calls; instead, they call directly back into the attribute engine. - The MPI_LASTUSEDCODE attribute only exists on MPI_COMM_WORLD and is updated appropriately when user error classes are added. --> Note: Edgar made a suggestion that for communicator attributes, we ignore the communicator argument when retrieving attributes and simply return the value. This will likely only happen on the trunk, and will alleviate (from the user's perspective) the restriction that LASTUSEDCODE is only on MPI_COMM_WORLD. - The predefined attributes are now "better". We create keyvals separately than assigning values, and correctly distinguish between comm, type, and win attributes. Initial values are now set as if they were called from MPI-1 fortran. - Added a comment to the top of src/attribute/attribute_predefined.c explaining what each of the predefined attributes were and what OMPI sets them to be. This commit was SVN r6193.
2005-06-27 23:17:11 +04:00
/* This stuff is very confusing. Be sure to see the comment at
the top of src/attributes/attributes.c. */
== Highlights == 1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler 1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release 1. The mpi module has been re-implemented and is significantly "mo' bettah" 1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk. == More details == Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7. Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey: * Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort) * The Fortran J3 committee * Tobias Burnus/gfortran * Tony !Goetz/Absoft * Terry !Donte/Oracle * ...and probably others whom I'm forgetting :-( There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax. Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time. As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory: {{{ ompi/mpi/fortran/ base/ - glue code mpif-h/ - what used to be ompi/mpi/f77 use-mpi-tkr/ - what used to be ompi/mpi/f90 use-mpi-ignore-tkr/ - new mpi module implementation use-mpi-f08/ - new mpi_f08 module implementation }}} There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version. Other things that were done: * ompi_info grew a few new output fields to describe what level of Fortran support is included * Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added * The old Fortran MPI libraries were renamed: * libmpi_f77 -> libmpi_mpifh * libmpi_f90 -> libmpi_usempi * The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example: {{{ shell$ ./configure CC=icc CXX=icpc FC=ifort ... }}} All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches). I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed. This commit was SVN r26283.
2012-04-18 19:57:29 +04:00
c_ierr = ompi_attr_get_fortran_mpi1(c_comm->c_keyhash,
OMPI_FINT_2_INT(*keyval),
attribute_val,
OMPI_LOGICAL_SINGLE_NAME_CONVERT(flag));
if (NULL != ierr) *ierr = OMPI_INT_2_FINT(c_ierr);
OMPI_SINGLE_INT_2_LOGICAL(flag);
}