1
1
openmpi/orte/dss/dss_internal_functions.c

147 строки
4.3 KiB
C
Исходник Обычный вид История

/*
* Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
* University Research and Technology
* Corporation. All rights reserved.
* Copyright (c) 2004-2006 The University of Tennessee and The University
* of Tennessee Research Foundation. All rights
* reserved.
* Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
* University of Stuttgart. All rights reserved.
* Copyright (c) 2004-2005 The Regents of the University of California.
* All rights reserved.
* $COPYRIGHT$
*
* Additional copyrights may follow
*
* $HEADER$
*/
#include "orte_config.h"
#include <stdio.h>
#ifdef HAVE_UNISTD_H
#include <unistd.h>
#endif
#ifdef HAVE_NETINET_IN_H
#include <netinet/in.h>
#endif
#include "opal/util/output.h"
Bring over the ORTE 2.0 DSS. This introduces a few changes, almost all of which are transparent to the user: 1. Introduces a flag for the type of buffer that now allows a user to either have a fully described or a completely non-described buffer. In the latter case, no data type descriptions are included in the buffer. This obviously limits what we can do for debugging purposes, but the intent here was to provide an optimized communications capability for those wanting it. Note that individual buffers can be designated for either type using the orte_dss.set_buffer_type command. In other words, the buffer type can be set dynamically - it isn't a configuration setting at all. The type will default to fully described. A buffer MUST be empty to set its type - this is checked by the set_buffer_type command, and you will receive an error if you violate that rule. IMPORTANT NOTE: ORTE 1.x actually will NOT work with non-described buffers. This capability should therefore NOT be used until we tell you it is okay. For now, it is here simply so we can begin bringing over parts of ORTE 2.0. The problem is that ORTE 1.x depends upon the transmission of non-hard-cast data types such as size_t. These "soft" types currently utilize a "peek" function to see their actual type in the buffer - obviously, without description, the system has no idea how to unpack these "soft" types. We will deal with this later - for now, please don't use the non-described buffer option. 2. Introduces the orte_std_cntr_t type. This will become the replacement for the size_t's used throughout ORTE 1.x. At the moment, it is actually typedef'd to size_t for backward compatibility. 3. Introduces the orte_dss.arith API that supports arbitrary arithmetic functions on numeric data types. Calling the function with any other data type will generate an error. This commit was SVN r11075.
2006-08-01 22:42:25 +04:00
#include "orte/class/orte_pointer_array.h"
#include "orte/mca/errmgr/errmgr.h"
#include "orte/dss/dss_internal.h"
/**
* Internal function that resizes (expands) an inuse buffer if
* necessary.
*/
char* orte_dss_buffer_extend(orte_buffer_t *buffer, size_t bytes_to_add)
{
size_t required, num_pages;
size_t pack_offset, unpack_offset;
/* Check to see if we have enough space already */
if (buffer->bytes_avail >= bytes_to_add) {
return buffer->pack_ptr;
}
/* If we don't, see how many pages will be required and alloc
that */
required = buffer->bytes_used + bytes_to_add;
num_pages = required / orte_dss_page_size;
if (0 != required % orte_dss_page_size) {
++num_pages;
}
if (NULL != buffer->base_ptr) {
pack_offset = ((char*) buffer->pack_ptr) - ((char*) buffer->base_ptr);
unpack_offset = ((char*) buffer->unpack_ptr) -
((char*) buffer->base_ptr);
buffer->base_ptr = (char*)realloc(buffer->base_ptr,
num_pages * orte_dss_page_size);
} else {
pack_offset = 0;
unpack_offset = 0;
buffer->bytes_used = 0;
buffer->base_ptr = (char*)malloc(num_pages * orte_dss_page_size);
}
if (NULL == buffer->base_ptr) {
ORTE_ERROR_LOG(ORTE_ERR_OUT_OF_RESOURCE);
return NULL;
}
buffer->pack_ptr = ((char*) buffer->base_ptr) + pack_offset;
buffer->unpack_ptr = ((char*) buffer->base_ptr) + unpack_offset;
buffer->bytes_allocated = num_pages * orte_dss_page_size;
buffer->bytes_avail = buffer->bytes_allocated - buffer->bytes_used;
/* All done */
return buffer->pack_ptr;
}
/*
* Internal function that checks to see if the specified number of bytes
* remain in the buffer for unpacking
*/
bool orte_dss_too_small(orte_buffer_t *buffer, size_t bytes_reqd)
{
size_t bytes_remaining_packed;
if (buffer->pack_ptr < buffer->unpack_ptr) {
ORTE_ERROR_LOG(ORTE_ERR_UNPACK_FAILURE);
return true;
}
bytes_remaining_packed = buffer->pack_ptr - buffer->unpack_ptr;
if (bytes_remaining_packed < bytes_reqd) {
ORTE_ERROR_LOG(ORTE_ERR_UNPACK_READ_PAST_END_OF_BUFFER);
return true;
}
return false;
}
int orte_dss_store_data_type(orte_buffer_t *buffer, orte_data_type_t type)
{
int rc;
Bring over the ORTE 2.0 DSS. This introduces a few changes, almost all of which are transparent to the user: 1. Introduces a flag for the type of buffer that now allows a user to either have a fully described or a completely non-described buffer. In the latter case, no data type descriptions are included in the buffer. This obviously limits what we can do for debugging purposes, but the intent here was to provide an optimized communications capability for those wanting it. Note that individual buffers can be designated for either type using the orte_dss.set_buffer_type command. In other words, the buffer type can be set dynamically - it isn't a configuration setting at all. The type will default to fully described. A buffer MUST be empty to set its type - this is checked by the set_buffer_type command, and you will receive an error if you violate that rule. IMPORTANT NOTE: ORTE 1.x actually will NOT work with non-described buffers. This capability should therefore NOT be used until we tell you it is okay. For now, it is here simply so we can begin bringing over parts of ORTE 2.0. The problem is that ORTE 1.x depends upon the transmission of non-hard-cast data types such as size_t. These "soft" types currently utilize a "peek" function to see their actual type in the buffer - obviously, without description, the system has no idea how to unpack these "soft" types. We will deal with this later - for now, please don't use the non-described buffer option. 2. Introduces the orte_std_cntr_t type. This will become the replacement for the size_t's used throughout ORTE 1.x. At the moment, it is actually typedef'd to size_t for backward compatibility. 3. Introduces the orte_dss.arith API that supports arbitrary arithmetic functions on numeric data types. Calling the function with any other data type will generate an error. This commit was SVN r11075.
2006-08-01 22:42:25 +04:00
orte_dss_type_info_t *info;
/* Lookup the pack function for the actual orte_data_type type and call it */
if (NULL == (info = (orte_dss_type_info_t*)orte_pointer_array_get_item(orte_dss_types, ORTE_DATA_TYPE_T))) {
Bring over the ORTE 2.0 DSS. This introduces a few changes, almost all of which are transparent to the user: 1. Introduces a flag for the type of buffer that now allows a user to either have a fully described or a completely non-described buffer. In the latter case, no data type descriptions are included in the buffer. This obviously limits what we can do for debugging purposes, but the intent here was to provide an optimized communications capability for those wanting it. Note that individual buffers can be designated for either type using the orte_dss.set_buffer_type command. In other words, the buffer type can be set dynamically - it isn't a configuration setting at all. The type will default to fully described. A buffer MUST be empty to set its type - this is checked by the set_buffer_type command, and you will receive an error if you violate that rule. IMPORTANT NOTE: ORTE 1.x actually will NOT work with non-described buffers. This capability should therefore NOT be used until we tell you it is okay. For now, it is here simply so we can begin bringing over parts of ORTE 2.0. The problem is that ORTE 1.x depends upon the transmission of non-hard-cast data types such as size_t. These "soft" types currently utilize a "peek" function to see their actual type in the buffer - obviously, without description, the system has no idea how to unpack these "soft" types. We will deal with this later - for now, please don't use the non-described buffer option. 2. Introduces the orte_std_cntr_t type. This will become the replacement for the size_t's used throughout ORTE 1.x. At the moment, it is actually typedef'd to size_t for backward compatibility. 3. Introduces the orte_dss.arith API that supports arbitrary arithmetic functions on numeric data types. Calling the function with any other data type will generate an error. This commit was SVN r11075.
2006-08-01 22:42:25 +04:00
ORTE_ERROR_LOG(ORTE_ERR_PACK_FAILURE);
return ORTE_ERR_PACK_FAILURE;
}
Bring over the ORTE 2.0 DSS. This introduces a few changes, almost all of which are transparent to the user: 1. Introduces a flag for the type of buffer that now allows a user to either have a fully described or a completely non-described buffer. In the latter case, no data type descriptions are included in the buffer. This obviously limits what we can do for debugging purposes, but the intent here was to provide an optimized communications capability for those wanting it. Note that individual buffers can be designated for either type using the orte_dss.set_buffer_type command. In other words, the buffer type can be set dynamically - it isn't a configuration setting at all. The type will default to fully described. A buffer MUST be empty to set its type - this is checked by the set_buffer_type command, and you will receive an error if you violate that rule. IMPORTANT NOTE: ORTE 1.x actually will NOT work with non-described buffers. This capability should therefore NOT be used until we tell you it is okay. For now, it is here simply so we can begin bringing over parts of ORTE 2.0. The problem is that ORTE 1.x depends upon the transmission of non-hard-cast data types such as size_t. These "soft" types currently utilize a "peek" function to see their actual type in the buffer - obviously, without description, the system has no idea how to unpack these "soft" types. We will deal with this later - for now, please don't use the non-described buffer option. 2. Introduces the orte_std_cntr_t type. This will become the replacement for the size_t's used throughout ORTE 1.x. At the moment, it is actually typedef'd to size_t for backward compatibility. 3. Introduces the orte_dss.arith API that supports arbitrary arithmetic functions on numeric data types. Calling the function with any other data type will generate an error. This commit was SVN r11075.
2006-08-01 22:42:25 +04:00
if (ORTE_SUCCESS != (rc = info->odti_pack_fn(buffer, &type, 1, ORTE_DATA_TYPE_T))) {
ORTE_ERROR_LOG(rc);
}
Bring over the ORTE 2.0 DSS. This introduces a few changes, almost all of which are transparent to the user: 1. Introduces a flag for the type of buffer that now allows a user to either have a fully described or a completely non-described buffer. In the latter case, no data type descriptions are included in the buffer. This obviously limits what we can do for debugging purposes, but the intent here was to provide an optimized communications capability for those wanting it. Note that individual buffers can be designated for either type using the orte_dss.set_buffer_type command. In other words, the buffer type can be set dynamically - it isn't a configuration setting at all. The type will default to fully described. A buffer MUST be empty to set its type - this is checked by the set_buffer_type command, and you will receive an error if you violate that rule. IMPORTANT NOTE: ORTE 1.x actually will NOT work with non-described buffers. This capability should therefore NOT be used until we tell you it is okay. For now, it is here simply so we can begin bringing over parts of ORTE 2.0. The problem is that ORTE 1.x depends upon the transmission of non-hard-cast data types such as size_t. These "soft" types currently utilize a "peek" function to see their actual type in the buffer - obviously, without description, the system has no idea how to unpack these "soft" types. We will deal with this later - for now, please don't use the non-described buffer option. 2. Introduces the orte_std_cntr_t type. This will become the replacement for the size_t's used throughout ORTE 1.x. At the moment, it is actually typedef'd to size_t for backward compatibility. 3. Introduces the orte_dss.arith API that supports arbitrary arithmetic functions on numeric data types. Calling the function with any other data type will generate an error. This commit was SVN r11075.
2006-08-01 22:42:25 +04:00
return rc;
}
int orte_dss_get_data_type(orte_buffer_t *buffer, orte_data_type_t *type)
{
int rc;
Bring over the ORTE 2.0 DSS. This introduces a few changes, almost all of which are transparent to the user: 1. Introduces a flag for the type of buffer that now allows a user to either have a fully described or a completely non-described buffer. In the latter case, no data type descriptions are included in the buffer. This obviously limits what we can do for debugging purposes, but the intent here was to provide an optimized communications capability for those wanting it. Note that individual buffers can be designated for either type using the orte_dss.set_buffer_type command. In other words, the buffer type can be set dynamically - it isn't a configuration setting at all. The type will default to fully described. A buffer MUST be empty to set its type - this is checked by the set_buffer_type command, and you will receive an error if you violate that rule. IMPORTANT NOTE: ORTE 1.x actually will NOT work with non-described buffers. This capability should therefore NOT be used until we tell you it is okay. For now, it is here simply so we can begin bringing over parts of ORTE 2.0. The problem is that ORTE 1.x depends upon the transmission of non-hard-cast data types such as size_t. These "soft" types currently utilize a "peek" function to see their actual type in the buffer - obviously, without description, the system has no idea how to unpack these "soft" types. We will deal with this later - for now, please don't use the non-described buffer option. 2. Introduces the orte_std_cntr_t type. This will become the replacement for the size_t's used throughout ORTE 1.x. At the moment, it is actually typedef'd to size_t for backward compatibility. 3. Introduces the orte_dss.arith API that supports arbitrary arithmetic functions on numeric data types. Calling the function with any other data type will generate an error. This commit was SVN r11075.
2006-08-01 22:42:25 +04:00
orte_dss_type_info_t *info;
orte_std_cntr_t n=1;
Bring over the ORTE 2.0 DSS. This introduces a few changes, almost all of which are transparent to the user: 1. Introduces a flag for the type of buffer that now allows a user to either have a fully described or a completely non-described buffer. In the latter case, no data type descriptions are included in the buffer. This obviously limits what we can do for debugging purposes, but the intent here was to provide an optimized communications capability for those wanting it. Note that individual buffers can be designated for either type using the orte_dss.set_buffer_type command. In other words, the buffer type can be set dynamically - it isn't a configuration setting at all. The type will default to fully described. A buffer MUST be empty to set its type - this is checked by the set_buffer_type command, and you will receive an error if you violate that rule. IMPORTANT NOTE: ORTE 1.x actually will NOT work with non-described buffers. This capability should therefore NOT be used until we tell you it is okay. For now, it is here simply so we can begin bringing over parts of ORTE 2.0. The problem is that ORTE 1.x depends upon the transmission of non-hard-cast data types such as size_t. These "soft" types currently utilize a "peek" function to see their actual type in the buffer - obviously, without description, the system has no idea how to unpack these "soft" types. We will deal with this later - for now, please don't use the non-described buffer option. 2. Introduces the orte_std_cntr_t type. This will become the replacement for the size_t's used throughout ORTE 1.x. At the moment, it is actually typedef'd to size_t for backward compatibility. 3. Introduces the orte_dss.arith API that supports arbitrary arithmetic functions on numeric data types. Calling the function with any other data type will generate an error. This commit was SVN r11075.
2006-08-01 22:42:25 +04:00
/* Lookup the unpack function for the actual orte_data_type type and call it */
if (NULL == (info = (orte_dss_type_info_t*)orte_pointer_array_get_item(orte_dss_types, ORTE_DATA_TYPE_T))) {
Bring over the ORTE 2.0 DSS. This introduces a few changes, almost all of which are transparent to the user: 1. Introduces a flag for the type of buffer that now allows a user to either have a fully described or a completely non-described buffer. In the latter case, no data type descriptions are included in the buffer. This obviously limits what we can do for debugging purposes, but the intent here was to provide an optimized communications capability for those wanting it. Note that individual buffers can be designated for either type using the orte_dss.set_buffer_type command. In other words, the buffer type can be set dynamically - it isn't a configuration setting at all. The type will default to fully described. A buffer MUST be empty to set its type - this is checked by the set_buffer_type command, and you will receive an error if you violate that rule. IMPORTANT NOTE: ORTE 1.x actually will NOT work with non-described buffers. This capability should therefore NOT be used until we tell you it is okay. For now, it is here simply so we can begin bringing over parts of ORTE 2.0. The problem is that ORTE 1.x depends upon the transmission of non-hard-cast data types such as size_t. These "soft" types currently utilize a "peek" function to see their actual type in the buffer - obviously, without description, the system has no idea how to unpack these "soft" types. We will deal with this later - for now, please don't use the non-described buffer option. 2. Introduces the orte_std_cntr_t type. This will become the replacement for the size_t's used throughout ORTE 1.x. At the moment, it is actually typedef'd to size_t for backward compatibility. 3. Introduces the orte_dss.arith API that supports arbitrary arithmetic functions on numeric data types. Calling the function with any other data type will generate an error. This commit was SVN r11075.
2006-08-01 22:42:25 +04:00
ORTE_ERROR_LOG(ORTE_ERR_PACK_FAILURE);
return ORTE_ERR_PACK_FAILURE;
}
Bring over the ORTE 2.0 DSS. This introduces a few changes, almost all of which are transparent to the user: 1. Introduces a flag for the type of buffer that now allows a user to either have a fully described or a completely non-described buffer. In the latter case, no data type descriptions are included in the buffer. This obviously limits what we can do for debugging purposes, but the intent here was to provide an optimized communications capability for those wanting it. Note that individual buffers can be designated for either type using the orte_dss.set_buffer_type command. In other words, the buffer type can be set dynamically - it isn't a configuration setting at all. The type will default to fully described. A buffer MUST be empty to set its type - this is checked by the set_buffer_type command, and you will receive an error if you violate that rule. IMPORTANT NOTE: ORTE 1.x actually will NOT work with non-described buffers. This capability should therefore NOT be used until we tell you it is okay. For now, it is here simply so we can begin bringing over parts of ORTE 2.0. The problem is that ORTE 1.x depends upon the transmission of non-hard-cast data types such as size_t. These "soft" types currently utilize a "peek" function to see their actual type in the buffer - obviously, without description, the system has no idea how to unpack these "soft" types. We will deal with this later - for now, please don't use the non-described buffer option. 2. Introduces the orte_std_cntr_t type. This will become the replacement for the size_t's used throughout ORTE 1.x. At the moment, it is actually typedef'd to size_t for backward compatibility. 3. Introduces the orte_dss.arith API that supports arbitrary arithmetic functions on numeric data types. Calling the function with any other data type will generate an error. This commit was SVN r11075.
2006-08-01 22:42:25 +04:00
if (ORTE_SUCCESS != (rc = info->odti_unpack_fn(buffer, type, &n, ORTE_DATA_TYPE_T))) {
ORTE_ERROR_LOG(rc);
}
return rc;
}