ports/openmpi
ports/openmpi
1
1
Форкнуть 0
Код Релизы Активность
3d72ccf1f4
openmpi/orte/tools/orte-migrate/help-orte-migrate.txt

61 строка
2.1 KiB
Plaintext
Исходник Обычный вид История

A number of C/R enhancements per RFC below: http://www.open-mpi.org/community/lists/devel/2010/07/8240.php Documentation: http://osl.iu.edu/research/ft/ Major Changes: -------------- * Added C/R-enabled Debugging support. Enabled with the --enable-crdebug flag. See the following website for more information: http://osl.iu.edu/research/ft/crdebug/ * Added Stable Storage (SStore) framework for checkpoint storage * 'central' component does a direct to central storage save * 'stage' component stages checkpoints to central storage while the application continues execution. * 'stage' supports offline compression of checkpoints before moving (sstore_stage_compress) * 'stage' supports local caching of checkpoints to improve automatic recovery (sstore_stage_caching) * Added Compression (compress) framework to support * Add two new ErrMgr recovery policies * {{{crmig}}} C/R Process Migration * {{{autor}}} C/R Automatic Recovery * Added the {{{ompi-migrate}}} command line tool to support the {{{crmig}}} ErrMgr component * Added CR MPI Ext functions (enable them with {{{--enable-mpi-ext=cr}}} configure option) * {{{OMPI_CR_Checkpoint}}} (Fixes trac:2342) * {{{OMPI_CR_Restart}}} * {{{OMPI_CR_Migrate}}} (may need some more work for mapping rules) * {{{OMPI_CR_INC_register_callback}}} (Fixes trac:2192) * {{{OMPI_CR_Quiesce_start}}} * {{{OMPI_CR_Quiesce_checkpoint}}} * {{{OMPI_CR_Quiesce_end}}} * {{{OMPI_CR_self_register_checkpoint_callback}}} * {{{OMPI_CR_self_register_restart_callback}}} * {{{OMPI_CR_self_register_continue_callback}}} * The ErrMgr predicted_fault() interface has been changed to take an opal_list_t of ErrMgr defined types. This will allow us to better support a wider range of fault prediction services in the future. * Add a progress meter to: * FileM rsh (filem_rsh_process_meter) * SnapC full (snapc_full_progress_meter) * SStore stage (sstore_stage_progress_meter) * Added 2 new command line options to ompi-restart * --showme : Display the full command line that would have been exec'ed. * --mpirun_opts : Command line options to pass directly to mpirun. (Fixes trac:2413) * Deprecated some MCA params: * crs_base_snapshot_dir deprecated, use sstore_stage_local_snapshot_dir * snapc_base_global_snapshot_dir deprecated, use sstore_base_global_snapshot_dir * snapc_base_global_shared deprecated, use sstore_stage_global_is_shared * snapc_base_store_in_place deprecated, replaced with different components of SStore * snapc_base_global_snapshot_ref deprecated, use sstore_base_global_snapshot_ref * snapc_base_establish_global_snapshot_dir deprecated, never well supported * snapc_full_skip_filem deprecated, use sstore_stage_skip_filem Minor Changes: -------------- * Fixes trac:1924 : {{{ompi-restart}}} now recognizes path prefixed checkpoint handles and does the right thing. * Fixes trac:2097 : {{{ompi-info}}} should now report all available CRS components * Fixes trac:2161 : Manual checkpoint movement. A user can 'mv' a checkpoint directory from the original location to another and still restart from it. * Fixes trac:2208 : Honor various TMPDIR varaibles instead of forcing {{{/tmp}}} * Move {{{ompi_cr_continue_like_restart}}} to {{{orte_cr_continue_like_restart}}} to be more flexible in where this should be set. * opal_crs_base_metadata_write* functions have been moved to SStore to support a wider range of metadata handling functionality. * Cleanup the CRS framework and components to work with the SStore framework. * Cleanup the SnapC framework and components to work with the SStore framework (cleans up these code paths considerably). * Add 'quiesce' hook to CRCP for a future enhancement. * We now require a BLCR version that supports {{{cr_request_file()}}} or {{{cr_request_checkpoint()}}} in order to make the code more maintainable. Note that {{{cr_request_file}}} has been deprecated since 0.7.0, so we prefer to use {{{cr_request_checkpoint()}}}. * Add optional application level INC callbacks (registered through the CR MPI Ext interface). * Increase the {{{opal_cr_thread_sleep_wait}}} parameter to 1000 microseconds to make the C/R thread less aggressive. * {{{opal-restart}}} now looks for cache directories before falling back on stable storage when asked. * {{{opal-restart}}} also support local decompression before restarting * {{{orte-checkpoint}}} now uses the SStore framework to work with the metadata * {{{orte-restart}}} now uses the SStore framework to work with the metadata * Remove the {{{orte-restart}}} preload option. This was removed since the user only needs to select the 'stage' component in order to support this functionality. * Since the '-am' parameter is saved in the metadata, {{{ompi-restart}}} no longer hard codes {{{-am ft-enable-cr}}}. * Fix {{{hnp}}} ErrMgr so that if a previous component in the stack has 'fixed' the problem, then it should be skipped. * Make sure to decrement the number of 'num_local_procs' in the orted when one goes away. * odls now checks the SStore framework to see if it needs to load any checkpoint files before launching (to support 'stage'). This separates the SStore logic from the --preload-[binary|files] options. * Add unique IDs to the named pipes established between the orted and the app in SnapC. This is to better support migration and automatic recovery activities. * Improve the checks for 'already checkpointing' error path. * A a recovery output timer, to show how long it takes to restart a job * Do a better job of cleaning up the old session directory on restart. * Add a local module to the autor and crmig ErrMgr components. These small modules prevent the 'orted' component from attempting a local recovery (Which does not work for MPI apps at the moment) * Add a fix for bounding the checkpointable region between MPI_Init and MPI_Finalize. This commit was SVN r23587. The following Trac tickets were found above: Ticket 1924 --> https://svn.open-mpi.org/trac/ompi/ticket/1924 Ticket 2097 --> https://svn.open-mpi.org/trac/ompi/ticket/2097 Ticket 2161 --> https://svn.open-mpi.org/trac/ompi/ticket/2161 Ticket 2192 --> https://svn.open-mpi.org/trac/ompi/ticket/2192 Ticket 2208 --> https://svn.open-mpi.org/trac/ompi/ticket/2208 Ticket 2342 --> https://svn.open-mpi.org/trac/ompi/ticket/2342 Ticket 2413 --> https://svn.open-mpi.org/trac/ompi/ticket/2413
2010-08-11 00:51:11 +04:00
# -*- text -*-
#
# Copyright (c) 2009-2010 The Trustees of Indiana University and Indiana
# University Research and Technology
# Corporation. All rights reserved.
#
A bunch of fixes and improvements to Open MPI's various command line tools. * fixed some bugs where "unknown" tokens were allowed on the command line (which should really only be used for ortertun). * if an unknown token is encountered, print a short error to stderr and quit with a nonzero exit status * if we don't find the right number of parameters to an option, print a short error to stderr and quit with a nonzero exit status * when --help is given, print the help message to stdout (not stderr) and quit with a zero exit status * added --showme:help option to the wrapper compilers * updated docs in opal/util/cmd_line.h * other small/miscellaneous CLI parsing bugs in various tools I won't bore you with what we did before. :-) Here's some examples of what the new behavior looks like: {{{ % ompi_info --bogus ompi_info: Error: unknown option "--bogus" Type 'ompi_info --help' for usage. % ompi_info --param bogus ompi_info: Error: option "--param" did not have enough parameters (2) Type 'ompi_info --help' for usage. % }}} This commit was SVN r26072.
2012-02-29 21:52:38 +04:00
# Copyright (c) 2012 Cisco Systems, Inc. All rights reserved.
A number of C/R enhancements per RFC below: http://www.open-mpi.org/community/lists/devel/2010/07/8240.php Documentation: http://osl.iu.edu/research/ft/ Major Changes: -------------- * Added C/R-enabled Debugging support. Enabled with the --enable-crdebug flag. See the following website for more information: http://osl.iu.edu/research/ft/crdebug/ * Added Stable Storage (SStore) framework for checkpoint storage * 'central' component does a direct to central storage save * 'stage' component stages checkpoints to central storage while the application continues execution. * 'stage' supports offline compression of checkpoints before moving (sstore_stage_compress) * 'stage' supports local caching of checkpoints to improve automatic recovery (sstore_stage_caching) * Added Compression (compress) framework to support * Add two new ErrMgr recovery policies * {{{crmig}}} C/R Process Migration * {{{autor}}} C/R Automatic Recovery * Added the {{{ompi-migrate}}} command line tool to support the {{{crmig}}} ErrMgr component * Added CR MPI Ext functions (enable them with {{{--enable-mpi-ext=cr}}} configure option) * {{{OMPI_CR_Checkpoint}}} (Fixes trac:2342) * {{{OMPI_CR_Restart}}} * {{{OMPI_CR_Migrate}}} (may need some more work for mapping rules) * {{{OMPI_CR_INC_register_callback}}} (Fixes trac:2192) * {{{OMPI_CR_Quiesce_start}}} * {{{OMPI_CR_Quiesce_checkpoint}}} * {{{OMPI_CR_Quiesce_end}}} * {{{OMPI_CR_self_register_checkpoint_callback}}} * {{{OMPI_CR_self_register_restart_callback}}} * {{{OMPI_CR_self_register_continue_callback}}} * The ErrMgr predicted_fault() interface has been changed to take an opal_list_t of ErrMgr defined types. This will allow us to better support a wider range of fault prediction services in the future. * Add a progress meter to: * FileM rsh (filem_rsh_process_meter) * SnapC full (snapc_full_progress_meter) * SStore stage (sstore_stage_progress_meter) * Added 2 new command line options to ompi-restart * --showme : Display the full command line that would have been exec'ed. * --mpirun_opts : Command line options to pass directly to mpirun. (Fixes trac:2413) * Deprecated some MCA params: * crs_base_snapshot_dir deprecated, use sstore_stage_local_snapshot_dir * snapc_base_global_snapshot_dir deprecated, use sstore_base_global_snapshot_dir * snapc_base_global_shared deprecated, use sstore_stage_global_is_shared * snapc_base_store_in_place deprecated, replaced with different components of SStore * snapc_base_global_snapshot_ref deprecated, use sstore_base_global_snapshot_ref * snapc_base_establish_global_snapshot_dir deprecated, never well supported * snapc_full_skip_filem deprecated, use sstore_stage_skip_filem Minor Changes: -------------- * Fixes trac:1924 : {{{ompi-restart}}} now recognizes path prefixed checkpoint handles and does the right thing. * Fixes trac:2097 : {{{ompi-info}}} should now report all available CRS components * Fixes trac:2161 : Manual checkpoint movement. A user can 'mv' a checkpoint directory from the original location to another and still restart from it. * Fixes trac:2208 : Honor various TMPDIR varaibles instead of forcing {{{/tmp}}} * Move {{{ompi_cr_continue_like_restart}}} to {{{orte_cr_continue_like_restart}}} to be more flexible in where this should be set. * opal_crs_base_metadata_write* functions have been moved to SStore to support a wider range of metadata handling functionality. * Cleanup the CRS framework and components to work with the SStore framework. * Cleanup the SnapC framework and components to work with the SStore framework (cleans up these code paths considerably). * Add 'quiesce' hook to CRCP for a future enhancement. * We now require a BLCR version that supports {{{cr_request_file()}}} or {{{cr_request_checkpoint()}}} in order to make the code more maintainable. Note that {{{cr_request_file}}} has been deprecated since 0.7.0, so we prefer to use {{{cr_request_checkpoint()}}}. * Add optional application level INC callbacks (registered through the CR MPI Ext interface). * Increase the {{{opal_cr_thread_sleep_wait}}} parameter to 1000 microseconds to make the C/R thread less aggressive. * {{{opal-restart}}} now looks for cache directories before falling back on stable storage when asked. * {{{opal-restart}}} also support local decompression before restarting * {{{orte-checkpoint}}} now uses the SStore framework to work with the metadata * {{{orte-restart}}} now uses the SStore framework to work with the metadata * Remove the {{{orte-restart}}} preload option. This was removed since the user only needs to select the 'stage' component in order to support this functionality. * Since the '-am' parameter is saved in the metadata, {{{ompi-restart}}} no longer hard codes {{{-am ft-enable-cr}}}. * Fix {{{hnp}}} ErrMgr so that if a previous component in the stack has 'fixed' the problem, then it should be skipped. * Make sure to decrement the number of 'num_local_procs' in the orted when one goes away. * odls now checks the SStore framework to see if it needs to load any checkpoint files before launching (to support 'stage'). This separates the SStore logic from the --preload-[binary|files] options. * Add unique IDs to the named pipes established between the orted and the app in SnapC. This is to better support migration and automatic recovery activities. * Improve the checks for 'already checkpointing' error path. * A a recovery output timer, to show how long it takes to restart a job * Do a better job of cleaning up the old session directory on restart. * Add a local module to the autor and crmig ErrMgr components. These small modules prevent the 'orted' component from attempting a local recovery (Which does not work for MPI apps at the moment) * Add a fix for bounding the checkpointable region between MPI_Init and MPI_Finalize. This commit was SVN r23587. The following Trac tickets were found above: Ticket 1924 --> https://svn.open-mpi.org/trac/ompi/ticket/1924 Ticket 2097 --> https://svn.open-mpi.org/trac/ompi/ticket/2097 Ticket 2161 --> https://svn.open-mpi.org/trac/ompi/ticket/2161 Ticket 2192 --> https://svn.open-mpi.org/trac/ompi/ticket/2192 Ticket 2208 --> https://svn.open-mpi.org/trac/ompi/ticket/2208 Ticket 2342 --> https://svn.open-mpi.org/trac/ompi/ticket/2342 Ticket 2413 --> https://svn.open-mpi.org/trac/ompi/ticket/2413
2010-08-11 00:51:11 +04:00
# $COPYRIGHT$
#
# Additional copyrights may follow
#
# $HEADER$
#
# This is the US/English help file for Open MPI migrate tool
#
[usage]
ompi-migrate PID_OF_MPIRUN
Open MPI Process Migration Tool
%s
A bunch of fixes and improvements to Open MPI's various command line tools. * fixed some bugs where "unknown" tokens were allowed on the command line (which should really only be used for ortertun). * if an unknown token is encountered, print a short error to stderr and quit with a nonzero exit status * if we don't find the right number of parameters to an option, print a short error to stderr and quit with a nonzero exit status * when --help is given, print the help message to stdout (not stderr) and quit with a zero exit status * added --showme:help option to the wrapper compilers * updated docs in opal/util/cmd_line.h * other small/miscellaneous CLI parsing bugs in various tools I won't bore you with what we did before. :-) Here's some examples of what the new behavior looks like: {{{ % ompi_info --bogus ompi_info: Error: unknown option "--bogus" Type 'ompi_info --help' for usage. % ompi_info --param bogus ompi_info: Error: option "--param" did not have enough parameters (2) Type 'ompi_info --help' for usage. % }}} This commit was SVN r26072.
2012-02-29 21:52:38 +04:00
#
A number of C/R enhancements per RFC below: http://www.open-mpi.org/community/lists/devel/2010/07/8240.php Documentation: http://osl.iu.edu/research/ft/ Major Changes: -------------- * Added C/R-enabled Debugging support. Enabled with the --enable-crdebug flag. See the following website for more information: http://osl.iu.edu/research/ft/crdebug/ * Added Stable Storage (SStore) framework for checkpoint storage * 'central' component does a direct to central storage save * 'stage' component stages checkpoints to central storage while the application continues execution. * 'stage' supports offline compression of checkpoints before moving (sstore_stage_compress) * 'stage' supports local caching of checkpoints to improve automatic recovery (sstore_stage_caching) * Added Compression (compress) framework to support * Add two new ErrMgr recovery policies * {{{crmig}}} C/R Process Migration * {{{autor}}} C/R Automatic Recovery * Added the {{{ompi-migrate}}} command line tool to support the {{{crmig}}} ErrMgr component * Added CR MPI Ext functions (enable them with {{{--enable-mpi-ext=cr}}} configure option) * {{{OMPI_CR_Checkpoint}}} (Fixes trac:2342) * {{{OMPI_CR_Restart}}} * {{{OMPI_CR_Migrate}}} (may need some more work for mapping rules) * {{{OMPI_CR_INC_register_callback}}} (Fixes trac:2192) * {{{OMPI_CR_Quiesce_start}}} * {{{OMPI_CR_Quiesce_checkpoint}}} * {{{OMPI_CR_Quiesce_end}}} * {{{OMPI_CR_self_register_checkpoint_callback}}} * {{{OMPI_CR_self_register_restart_callback}}} * {{{OMPI_CR_self_register_continue_callback}}} * The ErrMgr predicted_fault() interface has been changed to take an opal_list_t of ErrMgr defined types. This will allow us to better support a wider range of fault prediction services in the future. * Add a progress meter to: * FileM rsh (filem_rsh_process_meter) * SnapC full (snapc_full_progress_meter) * SStore stage (sstore_stage_progress_meter) * Added 2 new command line options to ompi-restart * --showme : Display the full command line that would have been exec'ed. * --mpirun_opts : Command line options to pass directly to mpirun. (Fixes trac:2413) * Deprecated some MCA params: * crs_base_snapshot_dir deprecated, use sstore_stage_local_snapshot_dir * snapc_base_global_snapshot_dir deprecated, use sstore_base_global_snapshot_dir * snapc_base_global_shared deprecated, use sstore_stage_global_is_shared * snapc_base_store_in_place deprecated, replaced with different components of SStore * snapc_base_global_snapshot_ref deprecated, use sstore_base_global_snapshot_ref * snapc_base_establish_global_snapshot_dir deprecated, never well supported * snapc_full_skip_filem deprecated, use sstore_stage_skip_filem Minor Changes: -------------- * Fixes trac:1924 : {{{ompi-restart}}} now recognizes path prefixed checkpoint handles and does the right thing. * Fixes trac:2097 : {{{ompi-info}}} should now report all available CRS components * Fixes trac:2161 : Manual checkpoint movement. A user can 'mv' a checkpoint directory from the original location to another and still restart from it. * Fixes trac:2208 : Honor various TMPDIR varaibles instead of forcing {{{/tmp}}} * Move {{{ompi_cr_continue_like_restart}}} to {{{orte_cr_continue_like_restart}}} to be more flexible in where this should be set. * opal_crs_base_metadata_write* functions have been moved to SStore to support a wider range of metadata handling functionality. * Cleanup the CRS framework and components to work with the SStore framework. * Cleanup the SnapC framework and components to work with the SStore framework (cleans up these code paths considerably). * Add 'quiesce' hook to CRCP for a future enhancement. * We now require a BLCR version that supports {{{cr_request_file()}}} or {{{cr_request_checkpoint()}}} in order to make the code more maintainable. Note that {{{cr_request_file}}} has been deprecated since 0.7.0, so we prefer to use {{{cr_request_checkpoint()}}}. * Add optional application level INC callbacks (registered through the CR MPI Ext interface). * Increase the {{{opal_cr_thread_sleep_wait}}} parameter to 1000 microseconds to make the C/R thread less aggressive. * {{{opal-restart}}} now looks for cache directories before falling back on stable storage when asked. * {{{opal-restart}}} also support local decompression before restarting * {{{orte-checkpoint}}} now uses the SStore framework to work with the metadata * {{{orte-restart}}} now uses the SStore framework to work with the metadata * Remove the {{{orte-restart}}} preload option. This was removed since the user only needs to select the 'stage' component in order to support this functionality. * Since the '-am' parameter is saved in the metadata, {{{ompi-restart}}} no longer hard codes {{{-am ft-enable-cr}}}. * Fix {{{hnp}}} ErrMgr so that if a previous component in the stack has 'fixed' the problem, then it should be skipped. * Make sure to decrement the number of 'num_local_procs' in the orted when one goes away. * odls now checks the SStore framework to see if it needs to load any checkpoint files before launching (to support 'stage'). This separates the SStore logic from the --preload-[binary|files] options. * Add unique IDs to the named pipes established between the orted and the app in SnapC. This is to better support migration and automatic recovery activities. * Improve the checks for 'already checkpointing' error path. * A a recovery output timer, to show how long it takes to restart a job * Do a better job of cleaning up the old session directory on restart. * Add a local module to the autor and crmig ErrMgr components. These small modules prevent the 'orted' component from attempting a local recovery (Which does not work for MPI apps at the moment) * Add a fix for bounding the checkpointable region between MPI_Init and MPI_Finalize. This commit was SVN r23587. The following Trac tickets were found above: Ticket 1924 --> https://svn.open-mpi.org/trac/ompi/ticket/1924 Ticket 2097 --> https://svn.open-mpi.org/trac/ompi/ticket/2097 Ticket 2161 --> https://svn.open-mpi.org/trac/ompi/ticket/2161 Ticket 2192 --> https://svn.open-mpi.org/trac/ompi/ticket/2192 Ticket 2208 --> https://svn.open-mpi.org/trac/ompi/ticket/2208 Ticket 2342 --> https://svn.open-mpi.org/trac/ompi/ticket/2342 Ticket 2413 --> https://svn.open-mpi.org/trac/ompi/ticket/2413
2010-08-11 00:51:11 +04:00
[invalid_pid]
Error: The PID (%d) is invalid because either you have not provided a PID
or provided an invalid PID.
Please see --help for usage.
A bunch of fixes and improvements to Open MPI's various command line tools. * fixed some bugs where "unknown" tokens were allowed on the command line (which should really only be used for ortertun). * if an unknown token is encountered, print a short error to stderr and quit with a nonzero exit status * if we don't find the right number of parameters to an option, print a short error to stderr and quit with a nonzero exit status * when --help is given, print the help message to stdout (not stderr) and quit with a zero exit status * added --showme:help option to the wrapper compilers * updated docs in opal/util/cmd_line.h * other small/miscellaneous CLI parsing bugs in various tools I won't bore you with what we did before. :-) Here's some examples of what the new behavior looks like: {{{ % ompi_info --bogus ompi_info: Error: unknown option "--bogus" Type 'ompi_info --help' for usage. % ompi_info --param bogus ompi_info: Error: option "--param" did not have enough parameters (2) Type 'ompi_info --help' for usage. % }}} This commit was SVN r26072.
2012-02-29 21:52:38 +04:00
#
A number of C/R enhancements per RFC below: http://www.open-mpi.org/community/lists/devel/2010/07/8240.php Documentation: http://osl.iu.edu/research/ft/ Major Changes: -------------- * Added C/R-enabled Debugging support. Enabled with the --enable-crdebug flag. See the following website for more information: http://osl.iu.edu/research/ft/crdebug/ * Added Stable Storage (SStore) framework for checkpoint storage * 'central' component does a direct to central storage save * 'stage' component stages checkpoints to central storage while the application continues execution. * 'stage' supports offline compression of checkpoints before moving (sstore_stage_compress) * 'stage' supports local caching of checkpoints to improve automatic recovery (sstore_stage_caching) * Added Compression (compress) framework to support * Add two new ErrMgr recovery policies * {{{crmig}}} C/R Process Migration * {{{autor}}} C/R Automatic Recovery * Added the {{{ompi-migrate}}} command line tool to support the {{{crmig}}} ErrMgr component * Added CR MPI Ext functions (enable them with {{{--enable-mpi-ext=cr}}} configure option) * {{{OMPI_CR_Checkpoint}}} (Fixes trac:2342) * {{{OMPI_CR_Restart}}} * {{{OMPI_CR_Migrate}}} (may need some more work for mapping rules) * {{{OMPI_CR_INC_register_callback}}} (Fixes trac:2192) * {{{OMPI_CR_Quiesce_start}}} * {{{OMPI_CR_Quiesce_checkpoint}}} * {{{OMPI_CR_Quiesce_end}}} * {{{OMPI_CR_self_register_checkpoint_callback}}} * {{{OMPI_CR_self_register_restart_callback}}} * {{{OMPI_CR_self_register_continue_callback}}} * The ErrMgr predicted_fault() interface has been changed to take an opal_list_t of ErrMgr defined types. This will allow us to better support a wider range of fault prediction services in the future. * Add a progress meter to: * FileM rsh (filem_rsh_process_meter) * SnapC full (snapc_full_progress_meter) * SStore stage (sstore_stage_progress_meter) * Added 2 new command line options to ompi-restart * --showme : Display the full command line that would have been exec'ed. * --mpirun_opts : Command line options to pass directly to mpirun. (Fixes trac:2413) * Deprecated some MCA params: * crs_base_snapshot_dir deprecated, use sstore_stage_local_snapshot_dir * snapc_base_global_snapshot_dir deprecated, use sstore_base_global_snapshot_dir * snapc_base_global_shared deprecated, use sstore_stage_global_is_shared * snapc_base_store_in_place deprecated, replaced with different components of SStore * snapc_base_global_snapshot_ref deprecated, use sstore_base_global_snapshot_ref * snapc_base_establish_global_snapshot_dir deprecated, never well supported * snapc_full_skip_filem deprecated, use sstore_stage_skip_filem Minor Changes: -------------- * Fixes trac:1924 : {{{ompi-restart}}} now recognizes path prefixed checkpoint handles and does the right thing. * Fixes trac:2097 : {{{ompi-info}}} should now report all available CRS components * Fixes trac:2161 : Manual checkpoint movement. A user can 'mv' a checkpoint directory from the original location to another and still restart from it. * Fixes trac:2208 : Honor various TMPDIR varaibles instead of forcing {{{/tmp}}} * Move {{{ompi_cr_continue_like_restart}}} to {{{orte_cr_continue_like_restart}}} to be more flexible in where this should be set. * opal_crs_base_metadata_write* functions have been moved to SStore to support a wider range of metadata handling functionality. * Cleanup the CRS framework and components to work with the SStore framework. * Cleanup the SnapC framework and components to work with the SStore framework (cleans up these code paths considerably). * Add 'quiesce' hook to CRCP for a future enhancement. * We now require a BLCR version that supports {{{cr_request_file()}}} or {{{cr_request_checkpoint()}}} in order to make the code more maintainable. Note that {{{cr_request_file}}} has been deprecated since 0.7.0, so we prefer to use {{{cr_request_checkpoint()}}}. * Add optional application level INC callbacks (registered through the CR MPI Ext interface). * Increase the {{{opal_cr_thread_sleep_wait}}} parameter to 1000 microseconds to make the C/R thread less aggressive. * {{{opal-restart}}} now looks for cache directories before falling back on stable storage when asked. * {{{opal-restart}}} also support local decompression before restarting * {{{orte-checkpoint}}} now uses the SStore framework to work with the metadata * {{{orte-restart}}} now uses the SStore framework to work with the metadata * Remove the {{{orte-restart}}} preload option. This was removed since the user only needs to select the 'stage' component in order to support this functionality. * Since the '-am' parameter is saved in the metadata, {{{ompi-restart}}} no longer hard codes {{{-am ft-enable-cr}}}. * Fix {{{hnp}}} ErrMgr so that if a previous component in the stack has 'fixed' the problem, then it should be skipped. * Make sure to decrement the number of 'num_local_procs' in the orted when one goes away. * odls now checks the SStore framework to see if it needs to load any checkpoint files before launching (to support 'stage'). This separates the SStore logic from the --preload-[binary|files] options. * Add unique IDs to the named pipes established between the orted and the app in SnapC. This is to better support migration and automatic recovery activities. * Improve the checks for 'already checkpointing' error path. * A a recovery output timer, to show how long it takes to restart a job * Do a better job of cleaning up the old session directory on restart. * Add a local module to the autor and crmig ErrMgr components. These small modules prevent the 'orted' component from attempting a local recovery (Which does not work for MPI apps at the moment) * Add a fix for bounding the checkpointable region between MPI_Init and MPI_Finalize. This commit was SVN r23587. The following Trac tickets were found above: Ticket 1924 --> https://svn.open-mpi.org/trac/ompi/ticket/1924 Ticket 2097 --> https://svn.open-mpi.org/trac/ompi/ticket/2097 Ticket 2161 --> https://svn.open-mpi.org/trac/ompi/ticket/2161 Ticket 2192 --> https://svn.open-mpi.org/trac/ompi/ticket/2192 Ticket 2208 --> https://svn.open-mpi.org/trac/ompi/ticket/2208 Ticket 2342 --> https://svn.open-mpi.org/trac/ompi/ticket/2342 Ticket 2413 --> https://svn.open-mpi.org/trac/ompi/ticket/2413
2010-08-11 00:51:11 +04:00
[no_universe]
Error: Unable to find the contact information for PID %d.
This could be due to one of the following:
- The PID is not that of an active MPIRUN.
- The application with this PID isn't migratable
- The application with this PID isn't an Open MPI application.
ompi-migrate attempted to find the session directory:
%s
A bunch of fixes and improvements to Open MPI's various command line tools. * fixed some bugs where "unknown" tokens were allowed on the command line (which should really only be used for ortertun). * if an unknown token is encountered, print a short error to stderr and quit with a nonzero exit status * if we don't find the right number of parameters to an option, print a short error to stderr and quit with a nonzero exit status * when --help is given, print the help message to stdout (not stderr) and quit with a zero exit status * added --showme:help option to the wrapper compilers * updated docs in opal/util/cmd_line.h * other small/miscellaneous CLI parsing bugs in various tools I won't bore you with what we did before. :-) Here's some examples of what the new behavior looks like: {{{ % ompi_info --bogus ompi_info: Error: unknown option "--bogus" Type 'ompi_info --help' for usage. % ompi_info --param bogus ompi_info: Error: option "--param" did not have enough parameters (2) Type 'ompi_info --help' for usage. % }}} This commit was SVN r26072.
2012-02-29 21:52:38 +04:00
#
A number of C/R enhancements per RFC below: http://www.open-mpi.org/community/lists/devel/2010/07/8240.php Documentation: http://osl.iu.edu/research/ft/ Major Changes: -------------- * Added C/R-enabled Debugging support. Enabled with the --enable-crdebug flag. See the following website for more information: http://osl.iu.edu/research/ft/crdebug/ * Added Stable Storage (SStore) framework for checkpoint storage * 'central' component does a direct to central storage save * 'stage' component stages checkpoints to central storage while the application continues execution. * 'stage' supports offline compression of checkpoints before moving (sstore_stage_compress) * 'stage' supports local caching of checkpoints to improve automatic recovery (sstore_stage_caching) * Added Compression (compress) framework to support * Add two new ErrMgr recovery policies * {{{crmig}}} C/R Process Migration * {{{autor}}} C/R Automatic Recovery * Added the {{{ompi-migrate}}} command line tool to support the {{{crmig}}} ErrMgr component * Added CR MPI Ext functions (enable them with {{{--enable-mpi-ext=cr}}} configure option) * {{{OMPI_CR_Checkpoint}}} (Fixes trac:2342) * {{{OMPI_CR_Restart}}} * {{{OMPI_CR_Migrate}}} (may need some more work for mapping rules) * {{{OMPI_CR_INC_register_callback}}} (Fixes trac:2192) * {{{OMPI_CR_Quiesce_start}}} * {{{OMPI_CR_Quiesce_checkpoint}}} * {{{OMPI_CR_Quiesce_end}}} * {{{OMPI_CR_self_register_checkpoint_callback}}} * {{{OMPI_CR_self_register_restart_callback}}} * {{{OMPI_CR_self_register_continue_callback}}} * The ErrMgr predicted_fault() interface has been changed to take an opal_list_t of ErrMgr defined types. This will allow us to better support a wider range of fault prediction services in the future. * Add a progress meter to: * FileM rsh (filem_rsh_process_meter) * SnapC full (snapc_full_progress_meter) * SStore stage (sstore_stage_progress_meter) * Added 2 new command line options to ompi-restart * --showme : Display the full command line that would have been exec'ed. * --mpirun_opts : Command line options to pass directly to mpirun. (Fixes trac:2413) * Deprecated some MCA params: * crs_base_snapshot_dir deprecated, use sstore_stage_local_snapshot_dir * snapc_base_global_snapshot_dir deprecated, use sstore_base_global_snapshot_dir * snapc_base_global_shared deprecated, use sstore_stage_global_is_shared * snapc_base_store_in_place deprecated, replaced with different components of SStore * snapc_base_global_snapshot_ref deprecated, use sstore_base_global_snapshot_ref * snapc_base_establish_global_snapshot_dir deprecated, never well supported * snapc_full_skip_filem deprecated, use sstore_stage_skip_filem Minor Changes: -------------- * Fixes trac:1924 : {{{ompi-restart}}} now recognizes path prefixed checkpoint handles and does the right thing. * Fixes trac:2097 : {{{ompi-info}}} should now report all available CRS components * Fixes trac:2161 : Manual checkpoint movement. A user can 'mv' a checkpoint directory from the original location to another and still restart from it. * Fixes trac:2208 : Honor various TMPDIR varaibles instead of forcing {{{/tmp}}} * Move {{{ompi_cr_continue_like_restart}}} to {{{orte_cr_continue_like_restart}}} to be more flexible in where this should be set. * opal_crs_base_metadata_write* functions have been moved to SStore to support a wider range of metadata handling functionality. * Cleanup the CRS framework and components to work with the SStore framework. * Cleanup the SnapC framework and components to work with the SStore framework (cleans up these code paths considerably). * Add 'quiesce' hook to CRCP for a future enhancement. * We now require a BLCR version that supports {{{cr_request_file()}}} or {{{cr_request_checkpoint()}}} in order to make the code more maintainable. Note that {{{cr_request_file}}} has been deprecated since 0.7.0, so we prefer to use {{{cr_request_checkpoint()}}}. * Add optional application level INC callbacks (registered through the CR MPI Ext interface). * Increase the {{{opal_cr_thread_sleep_wait}}} parameter to 1000 microseconds to make the C/R thread less aggressive. * {{{opal-restart}}} now looks for cache directories before falling back on stable storage when asked. * {{{opal-restart}}} also support local decompression before restarting * {{{orte-checkpoint}}} now uses the SStore framework to work with the metadata * {{{orte-restart}}} now uses the SStore framework to work with the metadata * Remove the {{{orte-restart}}} preload option. This was removed since the user only needs to select the 'stage' component in order to support this functionality. * Since the '-am' parameter is saved in the metadata, {{{ompi-restart}}} no longer hard codes {{{-am ft-enable-cr}}}. * Fix {{{hnp}}} ErrMgr so that if a previous component in the stack has 'fixed' the problem, then it should be skipped. * Make sure to decrement the number of 'num_local_procs' in the orted when one goes away. * odls now checks the SStore framework to see if it needs to load any checkpoint files before launching (to support 'stage'). This separates the SStore logic from the --preload-[binary|files] options. * Add unique IDs to the named pipes established between the orted and the app in SnapC. This is to better support migration and automatic recovery activities. * Improve the checks for 'already checkpointing' error path. * A a recovery output timer, to show how long it takes to restart a job * Do a better job of cleaning up the old session directory on restart. * Add a local module to the autor and crmig ErrMgr components. These small modules prevent the 'orted' component from attempting a local recovery (Which does not work for MPI apps at the moment) * Add a fix for bounding the checkpointable region between MPI_Init and MPI_Finalize. This commit was SVN r23587. The following Trac tickets were found above: Ticket 1924 --> https://svn.open-mpi.org/trac/ompi/ticket/1924 Ticket 2097 --> https://svn.open-mpi.org/trac/ompi/ticket/2097 Ticket 2161 --> https://svn.open-mpi.org/trac/ompi/ticket/2161 Ticket 2192 --> https://svn.open-mpi.org/trac/ompi/ticket/2192 Ticket 2208 --> https://svn.open-mpi.org/trac/ompi/ticket/2208 Ticket 2342 --> https://svn.open-mpi.org/trac/ompi/ticket/2342 Ticket 2413 --> https://svn.open-mpi.org/trac/ompi/ticket/2413
2010-08-11 00:51:11 +04:00
[unable_to_connect]
Error: Unable to connect to the Head Node Process to initiate the
migration of the application.
This could be due to one of the following:
- The PID is not that of an active MPIRUN.
- The application with this PID isn't migratable
- The application with this PID isn't an Open MPI application.
A bunch of fixes and improvements to Open MPI's various command line tools. * fixed some bugs where "unknown" tokens were allowed on the command line (which should really only be used for ortertun). * if an unknown token is encountered, print a short error to stderr and quit with a nonzero exit status * if we don't find the right number of parameters to an option, print a short error to stderr and quit with a nonzero exit status * when --help is given, print the help message to stdout (not stderr) and quit with a zero exit status * added --showme:help option to the wrapper compilers * updated docs in opal/util/cmd_line.h * other small/miscellaneous CLI parsing bugs in various tools I won't bore you with what we did before. :-) Here's some examples of what the new behavior looks like: {{{ % ompi_info --bogus ompi_info: Error: unknown option "--bogus" Type 'ompi_info --help' for usage. % ompi_info --param bogus ompi_info: Error: option "--param" did not have enough parameters (2) Type 'ompi_info --help' for usage. % }}} This commit was SVN r26072.
2012-02-29 21:52:38 +04:00
#
A number of C/R enhancements per RFC below: http://www.open-mpi.org/community/lists/devel/2010/07/8240.php Documentation: http://osl.iu.edu/research/ft/ Major Changes: -------------- * Added C/R-enabled Debugging support. Enabled with the --enable-crdebug flag. See the following website for more information: http://osl.iu.edu/research/ft/crdebug/ * Added Stable Storage (SStore) framework for checkpoint storage * 'central' component does a direct to central storage save * 'stage' component stages checkpoints to central storage while the application continues execution. * 'stage' supports offline compression of checkpoints before moving (sstore_stage_compress) * 'stage' supports local caching of checkpoints to improve automatic recovery (sstore_stage_caching) * Added Compression (compress) framework to support * Add two new ErrMgr recovery policies * {{{crmig}}} C/R Process Migration * {{{autor}}} C/R Automatic Recovery * Added the {{{ompi-migrate}}} command line tool to support the {{{crmig}}} ErrMgr component * Added CR MPI Ext functions (enable them with {{{--enable-mpi-ext=cr}}} configure option) * {{{OMPI_CR_Checkpoint}}} (Fixes trac:2342) * {{{OMPI_CR_Restart}}} * {{{OMPI_CR_Migrate}}} (may need some more work for mapping rules) * {{{OMPI_CR_INC_register_callback}}} (Fixes trac:2192) * {{{OMPI_CR_Quiesce_start}}} * {{{OMPI_CR_Quiesce_checkpoint}}} * {{{OMPI_CR_Quiesce_end}}} * {{{OMPI_CR_self_register_checkpoint_callback}}} * {{{OMPI_CR_self_register_restart_callback}}} * {{{OMPI_CR_self_register_continue_callback}}} * The ErrMgr predicted_fault() interface has been changed to take an opal_list_t of ErrMgr defined types. This will allow us to better support a wider range of fault prediction services in the future. * Add a progress meter to: * FileM rsh (filem_rsh_process_meter) * SnapC full (snapc_full_progress_meter) * SStore stage (sstore_stage_progress_meter) * Added 2 new command line options to ompi-restart * --showme : Display the full command line that would have been exec'ed. * --mpirun_opts : Command line options to pass directly to mpirun. (Fixes trac:2413) * Deprecated some MCA params: * crs_base_snapshot_dir deprecated, use sstore_stage_local_snapshot_dir * snapc_base_global_snapshot_dir deprecated, use sstore_base_global_snapshot_dir * snapc_base_global_shared deprecated, use sstore_stage_global_is_shared * snapc_base_store_in_place deprecated, replaced with different components of SStore * snapc_base_global_snapshot_ref deprecated, use sstore_base_global_snapshot_ref * snapc_base_establish_global_snapshot_dir deprecated, never well supported * snapc_full_skip_filem deprecated, use sstore_stage_skip_filem Minor Changes: -------------- * Fixes trac:1924 : {{{ompi-restart}}} now recognizes path prefixed checkpoint handles and does the right thing. * Fixes trac:2097 : {{{ompi-info}}} should now report all available CRS components * Fixes trac:2161 : Manual checkpoint movement. A user can 'mv' a checkpoint directory from the original location to another and still restart from it. * Fixes trac:2208 : Honor various TMPDIR varaibles instead of forcing {{{/tmp}}} * Move {{{ompi_cr_continue_like_restart}}} to {{{orte_cr_continue_like_restart}}} to be more flexible in where this should be set. * opal_crs_base_metadata_write* functions have been moved to SStore to support a wider range of metadata handling functionality. * Cleanup the CRS framework and components to work with the SStore framework. * Cleanup the SnapC framework and components to work with the SStore framework (cleans up these code paths considerably). * Add 'quiesce' hook to CRCP for a future enhancement. * We now require a BLCR version that supports {{{cr_request_file()}}} or {{{cr_request_checkpoint()}}} in order to make the code more maintainable. Note that {{{cr_request_file}}} has been deprecated since 0.7.0, so we prefer to use {{{cr_request_checkpoint()}}}. * Add optional application level INC callbacks (registered through the CR MPI Ext interface). * Increase the {{{opal_cr_thread_sleep_wait}}} parameter to 1000 microseconds to make the C/R thread less aggressive. * {{{opal-restart}}} now looks for cache directories before falling back on stable storage when asked. * {{{opal-restart}}} also support local decompression before restarting * {{{orte-checkpoint}}} now uses the SStore framework to work with the metadata * {{{orte-restart}}} now uses the SStore framework to work with the metadata * Remove the {{{orte-restart}}} preload option. This was removed since the user only needs to select the 'stage' component in order to support this functionality. * Since the '-am' parameter is saved in the metadata, {{{ompi-restart}}} no longer hard codes {{{-am ft-enable-cr}}}. * Fix {{{hnp}}} ErrMgr so that if a previous component in the stack has 'fixed' the problem, then it should be skipped. * Make sure to decrement the number of 'num_local_procs' in the orted when one goes away. * odls now checks the SStore framework to see if it needs to load any checkpoint files before launching (to support 'stage'). This separates the SStore logic from the --preload-[binary|files] options. * Add unique IDs to the named pipes established between the orted and the app in SnapC. This is to better support migration and automatic recovery activities. * Improve the checks for 'already checkpointing' error path. * A a recovery output timer, to show how long it takes to restart a job * Do a better job of cleaning up the old session directory on restart. * Add a local module to the autor and crmig ErrMgr components. These small modules prevent the 'orted' component from attempting a local recovery (Which does not work for MPI apps at the moment) * Add a fix for bounding the checkpointable region between MPI_Init and MPI_Finalize. This commit was SVN r23587. The following Trac tickets were found above: Ticket 1924 --> https://svn.open-mpi.org/trac/ompi/ticket/1924 Ticket 2097 --> https://svn.open-mpi.org/trac/ompi/ticket/2097 Ticket 2161 --> https://svn.open-mpi.org/trac/ompi/ticket/2161 Ticket 2192 --> https://svn.open-mpi.org/trac/ompi/ticket/2192 Ticket 2208 --> https://svn.open-mpi.org/trac/ompi/ticket/2208 Ticket 2342 --> https://svn.open-mpi.org/trac/ompi/ticket/2342 Ticket 2413 --> https://svn.open-mpi.org/trac/ompi/ticket/2413
2010-08-11 00:51:11 +04:00
[not_impl]
The following feature was requested, but is not currently implemented.
%s
If you require this feature contact the Open MPI development group.
A bunch of fixes and improvements to Open MPI's various command line tools. * fixed some bugs where "unknown" tokens were allowed on the command line (which should really only be used for ortertun). * if an unknown token is encountered, print a short error to stderr and quit with a nonzero exit status * if we don't find the right number of parameters to an option, print a short error to stderr and quit with a nonzero exit status * when --help is given, print the help message to stdout (not stderr) and quit with a zero exit status * added --showme:help option to the wrapper compilers * updated docs in opal/util/cmd_line.h * other small/miscellaneous CLI parsing bugs in various tools I won't bore you with what we did before. :-) Here's some examples of what the new behavior looks like: {{{ % ompi_info --bogus ompi_info: Error: unknown option "--bogus" Type 'ompi_info --help' for usage. % ompi_info --param bogus ompi_info: Error: option "--param" did not have enough parameters (2) Type 'ompi_info --help' for usage. % }}} This commit was SVN r26072.
2012-02-29 21:52:38 +04:00
#
A number of C/R enhancements per RFC below: http://www.open-mpi.org/community/lists/devel/2010/07/8240.php Documentation: http://osl.iu.edu/research/ft/ Major Changes: -------------- * Added C/R-enabled Debugging support. Enabled with the --enable-crdebug flag. See the following website for more information: http://osl.iu.edu/research/ft/crdebug/ * Added Stable Storage (SStore) framework for checkpoint storage * 'central' component does a direct to central storage save * 'stage' component stages checkpoints to central storage while the application continues execution. * 'stage' supports offline compression of checkpoints before moving (sstore_stage_compress) * 'stage' supports local caching of checkpoints to improve automatic recovery (sstore_stage_caching) * Added Compression (compress) framework to support * Add two new ErrMgr recovery policies * {{{crmig}}} C/R Process Migration * {{{autor}}} C/R Automatic Recovery * Added the {{{ompi-migrate}}} command line tool to support the {{{crmig}}} ErrMgr component * Added CR MPI Ext functions (enable them with {{{--enable-mpi-ext=cr}}} configure option) * {{{OMPI_CR_Checkpoint}}} (Fixes trac:2342) * {{{OMPI_CR_Restart}}} * {{{OMPI_CR_Migrate}}} (may need some more work for mapping rules) * {{{OMPI_CR_INC_register_callback}}} (Fixes trac:2192) * {{{OMPI_CR_Quiesce_start}}} * {{{OMPI_CR_Quiesce_checkpoint}}} * {{{OMPI_CR_Quiesce_end}}} * {{{OMPI_CR_self_register_checkpoint_callback}}} * {{{OMPI_CR_self_register_restart_callback}}} * {{{OMPI_CR_self_register_continue_callback}}} * The ErrMgr predicted_fault() interface has been changed to take an opal_list_t of ErrMgr defined types. This will allow us to better support a wider range of fault prediction services in the future. * Add a progress meter to: * FileM rsh (filem_rsh_process_meter) * SnapC full (snapc_full_progress_meter) * SStore stage (sstore_stage_progress_meter) * Added 2 new command line options to ompi-restart * --showme : Display the full command line that would have been exec'ed. * --mpirun_opts : Command line options to pass directly to mpirun. (Fixes trac:2413) * Deprecated some MCA params: * crs_base_snapshot_dir deprecated, use sstore_stage_local_snapshot_dir * snapc_base_global_snapshot_dir deprecated, use sstore_base_global_snapshot_dir * snapc_base_global_shared deprecated, use sstore_stage_global_is_shared * snapc_base_store_in_place deprecated, replaced with different components of SStore * snapc_base_global_snapshot_ref deprecated, use sstore_base_global_snapshot_ref * snapc_base_establish_global_snapshot_dir deprecated, never well supported * snapc_full_skip_filem deprecated, use sstore_stage_skip_filem Minor Changes: -------------- * Fixes trac:1924 : {{{ompi-restart}}} now recognizes path prefixed checkpoint handles and does the right thing. * Fixes trac:2097 : {{{ompi-info}}} should now report all available CRS components * Fixes trac:2161 : Manual checkpoint movement. A user can 'mv' a checkpoint directory from the original location to another and still restart from it. * Fixes trac:2208 : Honor various TMPDIR varaibles instead of forcing {{{/tmp}}} * Move {{{ompi_cr_continue_like_restart}}} to {{{orte_cr_continue_like_restart}}} to be more flexible in where this should be set. * opal_crs_base_metadata_write* functions have been moved to SStore to support a wider range of metadata handling functionality. * Cleanup the CRS framework and components to work with the SStore framework. * Cleanup the SnapC framework and components to work with the SStore framework (cleans up these code paths considerably). * Add 'quiesce' hook to CRCP for a future enhancement. * We now require a BLCR version that supports {{{cr_request_file()}}} or {{{cr_request_checkpoint()}}} in order to make the code more maintainable. Note that {{{cr_request_file}}} has been deprecated since 0.7.0, so we prefer to use {{{cr_request_checkpoint()}}}. * Add optional application level INC callbacks (registered through the CR MPI Ext interface). * Increase the {{{opal_cr_thread_sleep_wait}}} parameter to 1000 microseconds to make the C/R thread less aggressive. * {{{opal-restart}}} now looks for cache directories before falling back on stable storage when asked. * {{{opal-restart}}} also support local decompression before restarting * {{{orte-checkpoint}}} now uses the SStore framework to work with the metadata * {{{orte-restart}}} now uses the SStore framework to work with the metadata * Remove the {{{orte-restart}}} preload option. This was removed since the user only needs to select the 'stage' component in order to support this functionality. * Since the '-am' parameter is saved in the metadata, {{{ompi-restart}}} no longer hard codes {{{-am ft-enable-cr}}}. * Fix {{{hnp}}} ErrMgr so that if a previous component in the stack has 'fixed' the problem, then it should be skipped. * Make sure to decrement the number of 'num_local_procs' in the orted when one goes away. * odls now checks the SStore framework to see if it needs to load any checkpoint files before launching (to support 'stage'). This separates the SStore logic from the --preload-[binary|files] options. * Add unique IDs to the named pipes established between the orted and the app in SnapC. This is to better support migration and automatic recovery activities. * Improve the checks for 'already checkpointing' error path. * A a recovery output timer, to show how long it takes to restart a job * Do a better job of cleaning up the old session directory on restart. * Add a local module to the autor and crmig ErrMgr components. These small modules prevent the 'orted' component from attempting a local recovery (Which does not work for MPI apps at the moment) * Add a fix for bounding the checkpointable region between MPI_Init and MPI_Finalize. This commit was SVN r23587. The following Trac tickets were found above: Ticket 1924 --> https://svn.open-mpi.org/trac/ompi/ticket/1924 Ticket 2097 --> https://svn.open-mpi.org/trac/ompi/ticket/2097 Ticket 2161 --> https://svn.open-mpi.org/trac/ompi/ticket/2161 Ticket 2192 --> https://svn.open-mpi.org/trac/ompi/ticket/2192 Ticket 2208 --> https://svn.open-mpi.org/trac/ompi/ticket/2208 Ticket 2342 --> https://svn.open-mpi.org/trac/ompi/ticket/2342 Ticket 2413 --> https://svn.open-mpi.org/trac/ompi/ticket/2413
2010-08-11 00:51:11 +04:00
[err-inprogress]
Error: The Job identified by PID (%d) is currently migrating other processes.
Only one migration request can be processed at a time. Please try again
later.
A bunch of fixes and improvements to Open MPI's various command line tools. * fixed some bugs where "unknown" tokens were allowed on the command line (which should really only be used for ortertun). * if an unknown token is encountered, print a short error to stderr and quit with a nonzero exit status * if we don't find the right number of parameters to an option, print a short error to stderr and quit with a nonzero exit status * when --help is given, print the help message to stdout (not stderr) and quit with a zero exit status * added --showme:help option to the wrapper compilers * updated docs in opal/util/cmd_line.h * other small/miscellaneous CLI parsing bugs in various tools I won't bore you with what we did before. :-) Here's some examples of what the new behavior looks like: {{{ % ompi_info --bogus ompi_info: Error: unknown option "--bogus" Type 'ompi_info --help' for usage. % ompi_info --param bogus ompi_info: Error: option "--param" did not have enough parameters (2) Type 'ompi_info --help' for usage. % }}} This commit was SVN r26072.
2012-02-29 21:52:38 +04:00
#
Return an informative error message if the user requests a migration of a job that is not capable of it. C/R Functionality cleanup This commit was SVN r24307.
2011-01-26 18:36:34 +03:00
[err-other]
Error: The Job identified by PID (%d) was not able to migrate processes in this
job. This could be caused by any of the following:
- Invalid node or rank specified
- No processes on the indicated node can by migrated
- Process migration was not enabled for this job. Make sure to indicate
the proper AMCA file: "-am ft-enable-cr-recovery".
Копировать постоянную ссылку