Bring over all the work from the /tmp/ib-hw-detect branch. In
addition to my design and testing, it was conceptually approved by
Gil, Gleb, Pasha, Brad, and Galen. Functionally [probably somewhat
lightly] tested by Galen. We may still have to shake out some bugs
during the next few months, but it seems to be working for all the
cases that I can throw at it.
Here's a summary of the changes from that branch:
* Move MCA parameter registration to a new file (btl_openib_mca.c):
* Properly check the retun status of registering MCA params
* Check for valid values of MCA parameters
* Make help strings better
* Otherwise, the only default value of an MCA param that was
changed was max_btls; it went from 4 to -1 (meaning: use all
available)
* Properly prototyped internal functions in _component.c
* Made a bunch of functions static that didn't need to be public
* Renamed to remove "mca_" prefix from static functions
* Call new MCA param registration function
* Call new INI file read/lookup/finalize functions
* Updated a bunch of macros to be "BTL_" instead of "ORTE_"
* Be a little more consistent with return values
* Handle -1 for the max_btls MCA param
* Fixed a free() that should have been an OBJ_RELEASE()
* Some re-indenting
* Added INI-file parsing
* New flex file: btl_openib_ini.l
* New default HCA params .ini file (probably to be expanded over
time by other HCA vendors)
* Added more show_help messages for parsing problems
* Read in INI files and cache the values for later lookup
* When component opens an HCA, lookup to see if any corresponding
values were found in the INI files (ID'ed by the HCA vendor_id
and vendor_part_id)
* Added btl_openib_verbose MCA param that shows what the INI-file
stuff does (e.g., shows which MTU your HCA ends up using)
* Added btl_openib_hca_param_files as a colon-delimited list of INI
files to check for values during startup (in order,
left-to-right, just like the MCA base directory param).
* MTU is currently the only value supported in this framework.
* It is not a fatal error if we don't find params for the HCA in
the INI file(s). Instead, just print a warning. New MCA param
btl_openib_warn_no_hca_params_found can be used to disable
printing the warning.
* Add MTU to peer negotiation when making a connection
* Exchange maximum MTU; select the lesser of the two
This commit was SVN r11182.
2006-08-14 19:30:37 +00:00
|
|
|
#
|
2009-02-06 00:51:04 +00:00
|
|
|
# Copyright (c) 2006-2009 Cisco Systems, Inc. All rights reserved.
|
2008-06-05 13:40:26 +00:00
|
|
|
# Copyright (c) 2006-2008 Mellanox Technologies. All rights reserved.
|
Bring over all the work from the /tmp/ib-hw-detect branch. In
addition to my design and testing, it was conceptually approved by
Gil, Gleb, Pasha, Brad, and Galen. Functionally [probably somewhat
lightly] tested by Galen. We may still have to shake out some bugs
during the next few months, but it seems to be working for all the
cases that I can throw at it.
Here's a summary of the changes from that branch:
* Move MCA parameter registration to a new file (btl_openib_mca.c):
* Properly check the retun status of registering MCA params
* Check for valid values of MCA parameters
* Make help strings better
* Otherwise, the only default value of an MCA param that was
changed was max_btls; it went from 4 to -1 (meaning: use all
available)
* Properly prototyped internal functions in _component.c
* Made a bunch of functions static that didn't need to be public
* Renamed to remove "mca_" prefix from static functions
* Call new MCA param registration function
* Call new INI file read/lookup/finalize functions
* Updated a bunch of macros to be "BTL_" instead of "ORTE_"
* Be a little more consistent with return values
* Handle -1 for the max_btls MCA param
* Fixed a free() that should have been an OBJ_RELEASE()
* Some re-indenting
* Added INI-file parsing
* New flex file: btl_openib_ini.l
* New default HCA params .ini file (probably to be expanded over
time by other HCA vendors)
* Added more show_help messages for parsing problems
* Read in INI files and cache the values for later lookup
* When component opens an HCA, lookup to see if any corresponding
values were found in the INI files (ID'ed by the HCA vendor_id
and vendor_part_id)
* Added btl_openib_verbose MCA param that shows what the INI-file
stuff does (e.g., shows which MTU your HCA ends up using)
* Added btl_openib_hca_param_files as a colon-delimited list of INI
files to check for values during startup (in order,
left-to-right, just like the MCA base directory param).
* MTU is currently the only value supported in this framework.
* It is not a fatal error if we don't find params for the HCA in
the INI file(s). Instead, just print a warning. New MCA param
btl_openib_warn_no_hca_params_found can be used to disable
printing the warning.
* Add MTU to peer negotiation when making a connection
* Exchange maximum MTU; select the lesser of the two
This commit was SVN r11182.
2006-08-14 19:30:37 +00:00
|
|
|
# $COPYRIGHT$
|
|
|
|
|
#
|
|
|
|
|
# Additional copyrights may follow
|
|
|
|
|
#
|
|
|
|
|
|
2008-06-05 19:07:22 +00:00
|
|
|
# This is the default NIC/HCA parameters file for Open MPI's OpenIB
|
|
|
|
|
# BTL. If NIC/HCA vendors wish to add their respective values into
|
|
|
|
|
# this file (that is distributed with Open MPI), please contact the
|
|
|
|
|
# Open MPI development team. See http://www.open-mpi.org/ for
|
|
|
|
|
# details.
|
Bring over all the work from the /tmp/ib-hw-detect branch. In
addition to my design and testing, it was conceptually approved by
Gil, Gleb, Pasha, Brad, and Galen. Functionally [probably somewhat
lightly] tested by Galen. We may still have to shake out some bugs
during the next few months, but it seems to be working for all the
cases that I can throw at it.
Here's a summary of the changes from that branch:
* Move MCA parameter registration to a new file (btl_openib_mca.c):
* Properly check the retun status of registering MCA params
* Check for valid values of MCA parameters
* Make help strings better
* Otherwise, the only default value of an MCA param that was
changed was max_btls; it went from 4 to -1 (meaning: use all
available)
* Properly prototyped internal functions in _component.c
* Made a bunch of functions static that didn't need to be public
* Renamed to remove "mca_" prefix from static functions
* Call new MCA param registration function
* Call new INI file read/lookup/finalize functions
* Updated a bunch of macros to be "BTL_" instead of "ORTE_"
* Be a little more consistent with return values
* Handle -1 for the max_btls MCA param
* Fixed a free() that should have been an OBJ_RELEASE()
* Some re-indenting
* Added INI-file parsing
* New flex file: btl_openib_ini.l
* New default HCA params .ini file (probably to be expanded over
time by other HCA vendors)
* Added more show_help messages for parsing problems
* Read in INI files and cache the values for later lookup
* When component opens an HCA, lookup to see if any corresponding
values were found in the INI files (ID'ed by the HCA vendor_id
and vendor_part_id)
* Added btl_openib_verbose MCA param that shows what the INI-file
stuff does (e.g., shows which MTU your HCA ends up using)
* Added btl_openib_hca_param_files as a colon-delimited list of INI
files to check for values during startup (in order,
left-to-right, just like the MCA base directory param).
* MTU is currently the only value supported in this framework.
* It is not a fatal error if we don't find params for the HCA in
the INI file(s). Instead, just print a warning. New MCA param
btl_openib_warn_no_hca_params_found can be used to disable
printing the warning.
* Add MTU to peer negotiation when making a connection
* Exchange maximum MTU; select the lesser of the two
This commit was SVN r11182.
2006-08-14 19:30:37 +00:00
|
|
|
|
|
|
|
|
# This file is in the "ini" style, meaning that it has sections
|
|
|
|
|
# identified section names enclosed in square brackets (e.g.,
|
|
|
|
|
# "[Section name]") followed by "key = value" pairs indicating values
|
2008-06-05 19:07:22 +00:00
|
|
|
# for a specific NIC/HCA vendor and model. NICs/HCAs are identified
|
|
|
|
|
# by their vendor ID and vendor part ID, which can be obtained by
|
|
|
|
|
# running the diagnostic utility command "ibv_devinfo". The fields
|
|
|
|
|
# "vendor_id" and "vendor_part"id" are the vendor ID and vendor part
|
|
|
|
|
# ID, respectively.
|
Bring over all the work from the /tmp/ib-hw-detect branch. In
addition to my design and testing, it was conceptually approved by
Gil, Gleb, Pasha, Brad, and Galen. Functionally [probably somewhat
lightly] tested by Galen. We may still have to shake out some bugs
during the next few months, but it seems to be working for all the
cases that I can throw at it.
Here's a summary of the changes from that branch:
* Move MCA parameter registration to a new file (btl_openib_mca.c):
* Properly check the retun status of registering MCA params
* Check for valid values of MCA parameters
* Make help strings better
* Otherwise, the only default value of an MCA param that was
changed was max_btls; it went from 4 to -1 (meaning: use all
available)
* Properly prototyped internal functions in _component.c
* Made a bunch of functions static that didn't need to be public
* Renamed to remove "mca_" prefix from static functions
* Call new MCA param registration function
* Call new INI file read/lookup/finalize functions
* Updated a bunch of macros to be "BTL_" instead of "ORTE_"
* Be a little more consistent with return values
* Handle -1 for the max_btls MCA param
* Fixed a free() that should have been an OBJ_RELEASE()
* Some re-indenting
* Added INI-file parsing
* New flex file: btl_openib_ini.l
* New default HCA params .ini file (probably to be expanded over
time by other HCA vendors)
* Added more show_help messages for parsing problems
* Read in INI files and cache the values for later lookup
* When component opens an HCA, lookup to see if any corresponding
values were found in the INI files (ID'ed by the HCA vendor_id
and vendor_part_id)
* Added btl_openib_verbose MCA param that shows what the INI-file
stuff does (e.g., shows which MTU your HCA ends up using)
* Added btl_openib_hca_param_files as a colon-delimited list of INI
files to check for values during startup (in order,
left-to-right, just like the MCA base directory param).
* MTU is currently the only value supported in this framework.
* It is not a fatal error if we don't find params for the HCA in
the INI file(s). Instead, just print a warning. New MCA param
btl_openib_warn_no_hca_params_found can be used to disable
printing the warning.
* Add MTU to peer negotiation when making a connection
* Exchange maximum MTU; select the lesser of the two
This commit was SVN r11182.
2006-08-14 19:30:37 +00:00
|
|
|
|
|
|
|
|
# The sections in this file only accept a few fields:
|
|
|
|
|
|
2008-06-05 19:07:22 +00:00
|
|
|
# vendor_id: a comma-delimited list of integers of NIC/HCA vendor IDs,
|
2006-08-30 20:28:48 +00:00
|
|
|
# expressed either in decimal or hexidecimal (e.g., "13" or "0xd").
|
|
|
|
|
# Individual values can be taken directly from the output of
|
2008-06-05 19:07:22 +00:00
|
|
|
# "ibv_devinfo". NIC/HCA vendor ID's correspond to IEEE OUI's, for
|
|
|
|
|
# which you can find the canonical list here:
|
2007-07-09 20:09:31 +00:00
|
|
|
# http://standards.ieee.org/regauth/oui/. Example:
|
Bring over all the work from the /tmp/ib-hw-detect branch. In
addition to my design and testing, it was conceptually approved by
Gil, Gleb, Pasha, Brad, and Galen. Functionally [probably somewhat
lightly] tested by Galen. We may still have to shake out some bugs
during the next few months, but it seems to be working for all the
cases that I can throw at it.
Here's a summary of the changes from that branch:
* Move MCA parameter registration to a new file (btl_openib_mca.c):
* Properly check the retun status of registering MCA params
* Check for valid values of MCA parameters
* Make help strings better
* Otherwise, the only default value of an MCA param that was
changed was max_btls; it went from 4 to -1 (meaning: use all
available)
* Properly prototyped internal functions in _component.c
* Made a bunch of functions static that didn't need to be public
* Renamed to remove "mca_" prefix from static functions
* Call new MCA param registration function
* Call new INI file read/lookup/finalize functions
* Updated a bunch of macros to be "BTL_" instead of "ORTE_"
* Be a little more consistent with return values
* Handle -1 for the max_btls MCA param
* Fixed a free() that should have been an OBJ_RELEASE()
* Some re-indenting
* Added INI-file parsing
* New flex file: btl_openib_ini.l
* New default HCA params .ini file (probably to be expanded over
time by other HCA vendors)
* Added more show_help messages for parsing problems
* Read in INI files and cache the values for later lookup
* When component opens an HCA, lookup to see if any corresponding
values were found in the INI files (ID'ed by the HCA vendor_id
and vendor_part_id)
* Added btl_openib_verbose MCA param that shows what the INI-file
stuff does (e.g., shows which MTU your HCA ends up using)
* Added btl_openib_hca_param_files as a colon-delimited list of INI
files to check for values during startup (in order,
left-to-right, just like the MCA base directory param).
* MTU is currently the only value supported in this framework.
* It is not a fatal error if we don't find params for the HCA in
the INI file(s). Instead, just print a warning. New MCA param
btl_openib_warn_no_hca_params_found can be used to disable
printing the warning.
* Add MTU to peer negotiation when making a connection
* Exchange maximum MTU; select the lesser of the two
This commit was SVN r11182.
2006-08-14 19:30:37 +00:00
|
|
|
#
|
|
|
|
|
# vendor_id = 0x05ad
|
2008-07-29 22:33:17 +00:00
|
|
|
#
|
|
|
|
|
# Note: Several vendors resell Mellanox hardware and put their own firmware
|
|
|
|
|
# on the cards, therefore overriding the default Mellanox vendor ID.
|
|
|
|
|
#
|
|
|
|
|
# Mellanox 0x02c9
|
|
|
|
|
# Cisco 0x05ad
|
|
|
|
|
# Silverstorm 0x066a
|
|
|
|
|
# Voltaire 0x08f1
|
|
|
|
|
# HP 0x1708
|
|
|
|
|
# Sun 0x03ba
|
Bring over all the work from the /tmp/ib-hw-detect branch. In
addition to my design and testing, it was conceptually approved by
Gil, Gleb, Pasha, Brad, and Galen. Functionally [probably somewhat
lightly] tested by Galen. We may still have to shake out some bugs
during the next few months, but it seems to be working for all the
cases that I can throw at it.
Here's a summary of the changes from that branch:
* Move MCA parameter registration to a new file (btl_openib_mca.c):
* Properly check the retun status of registering MCA params
* Check for valid values of MCA parameters
* Make help strings better
* Otherwise, the only default value of an MCA param that was
changed was max_btls; it went from 4 to -1 (meaning: use all
available)
* Properly prototyped internal functions in _component.c
* Made a bunch of functions static that didn't need to be public
* Renamed to remove "mca_" prefix from static functions
* Call new MCA param registration function
* Call new INI file read/lookup/finalize functions
* Updated a bunch of macros to be "BTL_" instead of "ORTE_"
* Be a little more consistent with return values
* Handle -1 for the max_btls MCA param
* Fixed a free() that should have been an OBJ_RELEASE()
* Some re-indenting
* Added INI-file parsing
* New flex file: btl_openib_ini.l
* New default HCA params .ini file (probably to be expanded over
time by other HCA vendors)
* Added more show_help messages for parsing problems
* Read in INI files and cache the values for later lookup
* When component opens an HCA, lookup to see if any corresponding
values were found in the INI files (ID'ed by the HCA vendor_id
and vendor_part_id)
* Added btl_openib_verbose MCA param that shows what the INI-file
stuff does (e.g., shows which MTU your HCA ends up using)
* Added btl_openib_hca_param_files as a colon-delimited list of INI
files to check for values during startup (in order,
left-to-right, just like the MCA base directory param).
* MTU is currently the only value supported in this framework.
* It is not a fatal error if we don't find params for the HCA in
the INI file(s). Instead, just print a warning. New MCA param
btl_openib_warn_no_hca_params_found can be used to disable
printing the warning.
* Add MTU to peer negotiation when making a connection
* Exchange maximum MTU; select the lesser of the two
This commit was SVN r11182.
2006-08-14 19:30:37 +00:00
|
|
|
|
2008-06-05 19:07:22 +00:00
|
|
|
# vendor_part_id: a comma-delimited list of integers of different
|
|
|
|
|
# NIC/HCA models from a single vendor, expressed in either decimal or
|
Bring over all the work from the /tmp/ib-hw-detect branch. In
addition to my design and testing, it was conceptually approved by
Gil, Gleb, Pasha, Brad, and Galen. Functionally [probably somewhat
lightly] tested by Galen. We may still have to shake out some bugs
during the next few months, but it seems to be working for all the
cases that I can throw at it.
Here's a summary of the changes from that branch:
* Move MCA parameter registration to a new file (btl_openib_mca.c):
* Properly check the retun status of registering MCA params
* Check for valid values of MCA parameters
* Make help strings better
* Otherwise, the only default value of an MCA param that was
changed was max_btls; it went from 4 to -1 (meaning: use all
available)
* Properly prototyped internal functions in _component.c
* Made a bunch of functions static that didn't need to be public
* Renamed to remove "mca_" prefix from static functions
* Call new MCA param registration function
* Call new INI file read/lookup/finalize functions
* Updated a bunch of macros to be "BTL_" instead of "ORTE_"
* Be a little more consistent with return values
* Handle -1 for the max_btls MCA param
* Fixed a free() that should have been an OBJ_RELEASE()
* Some re-indenting
* Added INI-file parsing
* New flex file: btl_openib_ini.l
* New default HCA params .ini file (probably to be expanded over
time by other HCA vendors)
* Added more show_help messages for parsing problems
* Read in INI files and cache the values for later lookup
* When component opens an HCA, lookup to see if any corresponding
values were found in the INI files (ID'ed by the HCA vendor_id
and vendor_part_id)
* Added btl_openib_verbose MCA param that shows what the INI-file
stuff does (e.g., shows which MTU your HCA ends up using)
* Added btl_openib_hca_param_files as a colon-delimited list of INI
files to check for values during startup (in order,
left-to-right, just like the MCA base directory param).
* MTU is currently the only value supported in this framework.
* It is not a fatal error if we don't find params for the HCA in
the INI file(s). Instead, just print a warning. New MCA param
btl_openib_warn_no_hca_params_found can be used to disable
printing the warning.
* Add MTU to peer negotiation when making a connection
* Exchange maximum MTU; select the lesser of the two
This commit was SVN r11182.
2006-08-14 19:30:37 +00:00
|
|
|
# hexidecimal (e.g., "13" or "0xd"). Individual values can be
|
|
|
|
|
# obtained from the output of the "ibv_devinfo". Example:
|
|
|
|
|
#
|
|
|
|
|
# vendor_part_id = 25208,25218
|
|
|
|
|
|
|
|
|
|
# mtu: an integer indicating the maximum transfer unit (MTU) to be
|
2008-06-05 19:07:22 +00:00
|
|
|
# used with this NIC/HCA. The effective MTU will be the minimum of an
|
|
|
|
|
# NIC's/HCA's MTU value and its peer NIC's/HCA's MTU value. Valid
|
|
|
|
|
# values are 256, 512, 1024, 2048, and 4096. Example:
|
Bring over all the work from the /tmp/ib-hw-detect branch. In
addition to my design and testing, it was conceptually approved by
Gil, Gleb, Pasha, Brad, and Galen. Functionally [probably somewhat
lightly] tested by Galen. We may still have to shake out some bugs
during the next few months, but it seems to be working for all the
cases that I can throw at it.
Here's a summary of the changes from that branch:
* Move MCA parameter registration to a new file (btl_openib_mca.c):
* Properly check the retun status of registering MCA params
* Check for valid values of MCA parameters
* Make help strings better
* Otherwise, the only default value of an MCA param that was
changed was max_btls; it went from 4 to -1 (meaning: use all
available)
* Properly prototyped internal functions in _component.c
* Made a bunch of functions static that didn't need to be public
* Renamed to remove "mca_" prefix from static functions
* Call new MCA param registration function
* Call new INI file read/lookup/finalize functions
* Updated a bunch of macros to be "BTL_" instead of "ORTE_"
* Be a little more consistent with return values
* Handle -1 for the max_btls MCA param
* Fixed a free() that should have been an OBJ_RELEASE()
* Some re-indenting
* Added INI-file parsing
* New flex file: btl_openib_ini.l
* New default HCA params .ini file (probably to be expanded over
time by other HCA vendors)
* Added more show_help messages for parsing problems
* Read in INI files and cache the values for later lookup
* When component opens an HCA, lookup to see if any corresponding
values were found in the INI files (ID'ed by the HCA vendor_id
and vendor_part_id)
* Added btl_openib_verbose MCA param that shows what the INI-file
stuff does (e.g., shows which MTU your HCA ends up using)
* Added btl_openib_hca_param_files as a colon-delimited list of INI
files to check for values during startup (in order,
left-to-right, just like the MCA base directory param).
* MTU is currently the only value supported in this framework.
* It is not a fatal error if we don't find params for the HCA in
the INI file(s). Instead, just print a warning. New MCA param
btl_openib_warn_no_hca_params_found can be used to disable
printing the warning.
* Add MTU to peer negotiation when making a connection
* Exchange maximum MTU; select the lesser of the two
This commit was SVN r11182.
2006-08-14 19:30:37 +00:00
|
|
|
#
|
|
|
|
|
# mtu = 1024
|
|
|
|
|
|
2006-12-14 15:52:13 +00:00
|
|
|
# use_eager_rdma: an integer indicating whether RDMA should be used
|
|
|
|
|
# for eager messages. 0 values indicate "no" (false); non-zero values
|
|
|
|
|
# indicate "yes" (true). This flag should only be enabled for
|
2008-06-05 19:07:22 +00:00
|
|
|
# NICs/HCAs that can provide guarantees about ordering of data in
|
|
|
|
|
# memory -- that the last byte of an incoming RDMA write will always
|
|
|
|
|
# be written last. Certain cards cannot provide this guarantee, while
|
|
|
|
|
# others can.
|
2006-12-14 15:52:13 +00:00
|
|
|
|
|
|
|
|
# use_eager_rdma = 1
|
|
|
|
|
|
2008-06-05 19:07:22 +00:00
|
|
|
# receive_queues: a list of "bucket shared receive queues" (BSRQ) that
|
|
|
|
|
# are opened between MPI process peer pairs for point-to-point
|
|
|
|
|
# communications of messages shorter than the total length required
|
|
|
|
|
# for RDMA transfer. The use of multiple RQs, each with different
|
|
|
|
|
# sized posted receive buffers can allow [much] better registered
|
|
|
|
|
# memory utilization -- MPI messages are sent on the QP with the
|
|
|
|
|
# smallest buffer size that will fit the message. Note that flow
|
|
|
|
|
# control messages are always sent across the QP with the smallest
|
|
|
|
|
# buffer size. Also note that the buffers *must* be listed in
|
|
|
|
|
# increasing buffer size. This parameter matches the
|
|
|
|
|
# mca_btl_openib_receive_queues MCA parameter; see the ompi_info help
|
|
|
|
|
# message and FAQ for a description of its values. BSRQ
|
|
|
|
|
# specifications are found in this precedence:
|
|
|
|
|
|
|
|
|
|
# highest: specifying the mca_btl_openib_receive_queues MCA param
|
|
|
|
|
# next: finding a value in this file
|
|
|
|
|
# lowest: using the default mca_btl_openib_receive_queues MCA param value
|
|
|
|
|
|
|
|
|
|
# receive_queues = P,128,256,192,128:S,65536,256,192,128
|
|
|
|
|
|
2008-06-24 17:18:07 +00:00
|
|
|
# max_inline_data: an integer specifying the maximum inline data (in
|
2008-11-14 12:15:35 +00:00
|
|
|
# bytes) supported by the device. -1 means to use a run-time probe to
|
2008-06-24 17:18:07 +00:00
|
|
|
# figure out the maximum value supported by the device.
|
|
|
|
|
|
|
|
|
|
# max_inline_data = 1024
|
|
|
|
|
|
2009-02-06 00:51:04 +00:00
|
|
|
# rdmacm_reject_causes_connect_error: a boolean indicating whether
|
|
|
|
|
# when an RDMA CM REJECT is issued on the device, instead of getting
|
|
|
|
|
# the expected REJECT event back, you might get a CONNECT_ERROR event.
|
|
|
|
|
# Open MPI uses RDMA CM REJECT messages in its normal wireup
|
|
|
|
|
# procedure; some connections are *expected* to be rejected. However,
|
2009-02-18 22:12:42 +00:00
|
|
|
# with some older drivers, if process A issues a REJECT, process B
|
|
|
|
|
# will receive a CONNECT_ERROR event instead of a REJECT event. So if
|
|
|
|
|
# this flag is set to true and we receive a CONNECT_ERROR event on a
|
|
|
|
|
# connection where we are expecting a REJECT, then just treat the
|
2009-02-06 00:51:04 +00:00
|
|
|
# CONNECT_ERROR exactly as we would have treated the REJECT. Setting
|
2009-02-18 22:12:42 +00:00
|
|
|
# this flag to true allows Open MPI to work around the behavior
|
|
|
|
|
# described above. It is [mostly] safe to set this flag to true even
|
|
|
|
|
# after a driver has been fixed; the scope of where this flag is used
|
|
|
|
|
# is small enough that it *shouldn't* mask real CONNECT_ERROR events.
|
2009-02-06 00:51:04 +00:00
|
|
|
|
|
|
|
|
# rdmacm_reject_causes_connect_error = 1
|
|
|
|
|
|
Bring over all the work from the /tmp/ib-hw-detect branch. In
addition to my design and testing, it was conceptually approved by
Gil, Gleb, Pasha, Brad, and Galen. Functionally [probably somewhat
lightly] tested by Galen. We may still have to shake out some bugs
during the next few months, but it seems to be working for all the
cases that I can throw at it.
Here's a summary of the changes from that branch:
* Move MCA parameter registration to a new file (btl_openib_mca.c):
* Properly check the retun status of registering MCA params
* Check for valid values of MCA parameters
* Make help strings better
* Otherwise, the only default value of an MCA param that was
changed was max_btls; it went from 4 to -1 (meaning: use all
available)
* Properly prototyped internal functions in _component.c
* Made a bunch of functions static that didn't need to be public
* Renamed to remove "mca_" prefix from static functions
* Call new MCA param registration function
* Call new INI file read/lookup/finalize functions
* Updated a bunch of macros to be "BTL_" instead of "ORTE_"
* Be a little more consistent with return values
* Handle -1 for the max_btls MCA param
* Fixed a free() that should have been an OBJ_RELEASE()
* Some re-indenting
* Added INI-file parsing
* New flex file: btl_openib_ini.l
* New default HCA params .ini file (probably to be expanded over
time by other HCA vendors)
* Added more show_help messages for parsing problems
* Read in INI files and cache the values for later lookup
* When component opens an HCA, lookup to see if any corresponding
values were found in the INI files (ID'ed by the HCA vendor_id
and vendor_part_id)
* Added btl_openib_verbose MCA param that shows what the INI-file
stuff does (e.g., shows which MTU your HCA ends up using)
* Added btl_openib_hca_param_files as a colon-delimited list of INI
files to check for values during startup (in order,
left-to-right, just like the MCA base directory param).
* MTU is currently the only value supported in this framework.
* It is not a fatal error if we don't find params for the HCA in
the INI file(s). Instead, just print a warning. New MCA param
btl_openib_warn_no_hca_params_found can be used to disable
printing the warning.
* Add MTU to peer negotiation when making a connection
* Exchange maximum MTU; select the lesser of the two
This commit was SVN r11182.
2006-08-14 19:30:37 +00:00
|
|
|
############################################################################
|
|
|
|
|
|
|
|
|
|
[default]
|
|
|
|
|
# These are the default values, identified by the vendor and part ID
|
2008-06-05 19:07:22 +00:00
|
|
|
# numbers of 0 and 0. If queried NIC/HCA does not return vendor and
|
|
|
|
|
# part ID numbers that match any of the sections in this file, the
|
|
|
|
|
# values in this section are used. Vendor IDs and part IDs can be hex
|
|
|
|
|
# or decimal.
|
Bring over all the work from the /tmp/ib-hw-detect branch. In
addition to my design and testing, it was conceptually approved by
Gil, Gleb, Pasha, Brad, and Galen. Functionally [probably somewhat
lightly] tested by Galen. We may still have to shake out some bugs
during the next few months, but it seems to be working for all the
cases that I can throw at it.
Here's a summary of the changes from that branch:
* Move MCA parameter registration to a new file (btl_openib_mca.c):
* Properly check the retun status of registering MCA params
* Check for valid values of MCA parameters
* Make help strings better
* Otherwise, the only default value of an MCA param that was
changed was max_btls; it went from 4 to -1 (meaning: use all
available)
* Properly prototyped internal functions in _component.c
* Made a bunch of functions static that didn't need to be public
* Renamed to remove "mca_" prefix from static functions
* Call new MCA param registration function
* Call new INI file read/lookup/finalize functions
* Updated a bunch of macros to be "BTL_" instead of "ORTE_"
* Be a little more consistent with return values
* Handle -1 for the max_btls MCA param
* Fixed a free() that should have been an OBJ_RELEASE()
* Some re-indenting
* Added INI-file parsing
* New flex file: btl_openib_ini.l
* New default HCA params .ini file (probably to be expanded over
time by other HCA vendors)
* Added more show_help messages for parsing problems
* Read in INI files and cache the values for later lookup
* When component opens an HCA, lookup to see if any corresponding
values were found in the INI files (ID'ed by the HCA vendor_id
and vendor_part_id)
* Added btl_openib_verbose MCA param that shows what the INI-file
stuff does (e.g., shows which MTU your HCA ends up using)
* Added btl_openib_hca_param_files as a colon-delimited list of INI
files to check for values during startup (in order,
left-to-right, just like the MCA base directory param).
* MTU is currently the only value supported in this framework.
* It is not a fatal error if we don't find params for the HCA in
the INI file(s). Instead, just print a warning. New MCA param
btl_openib_warn_no_hca_params_found can be used to disable
printing the warning.
* Add MTU to peer negotiation when making a connection
* Exchange maximum MTU; select the lesser of the two
This commit was SVN r11182.
2006-08-14 19:30:37 +00:00
|
|
|
vendor_id = 0
|
|
|
|
|
vendor_part_id = 0
|
2006-12-14 15:52:13 +00:00
|
|
|
use_eager_rdma = 0
|
Bring over all the work from the /tmp/ib-hw-detect branch. In
addition to my design and testing, it was conceptually approved by
Gil, Gleb, Pasha, Brad, and Galen. Functionally [probably somewhat
lightly] tested by Galen. We may still have to shake out some bugs
during the next few months, but it seems to be working for all the
cases that I can throw at it.
Here's a summary of the changes from that branch:
* Move MCA parameter registration to a new file (btl_openib_mca.c):
* Properly check the retun status of registering MCA params
* Check for valid values of MCA parameters
* Make help strings better
* Otherwise, the only default value of an MCA param that was
changed was max_btls; it went from 4 to -1 (meaning: use all
available)
* Properly prototyped internal functions in _component.c
* Made a bunch of functions static that didn't need to be public
* Renamed to remove "mca_" prefix from static functions
* Call new MCA param registration function
* Call new INI file read/lookup/finalize functions
* Updated a bunch of macros to be "BTL_" instead of "ORTE_"
* Be a little more consistent with return values
* Handle -1 for the max_btls MCA param
* Fixed a free() that should have been an OBJ_RELEASE()
* Some re-indenting
* Added INI-file parsing
* New flex file: btl_openib_ini.l
* New default HCA params .ini file (probably to be expanded over
time by other HCA vendors)
* Added more show_help messages for parsing problems
* Read in INI files and cache the values for later lookup
* When component opens an HCA, lookup to see if any corresponding
values were found in the INI files (ID'ed by the HCA vendor_id
and vendor_part_id)
* Added btl_openib_verbose MCA param that shows what the INI-file
stuff does (e.g., shows which MTU your HCA ends up using)
* Added btl_openib_hca_param_files as a colon-delimited list of INI
files to check for values during startup (in order,
left-to-right, just like the MCA base directory param).
* MTU is currently the only value supported in this framework.
* It is not a fatal error if we don't find params for the HCA in
the INI file(s). Instead, just print a warning. New MCA param
btl_openib_warn_no_hca_params_found can be used to disable
printing the warning.
* Add MTU to peer negotiation when making a connection
* Exchange maximum MTU; select the lesser of the two
This commit was SVN r11182.
2006-08-14 19:30:37 +00:00
|
|
|
mtu = 1024
|
2008-06-30 07:47:09 +00:00
|
|
|
max_inline_data = 128
|
Bring over all the work from the /tmp/ib-hw-detect branch. In
addition to my design and testing, it was conceptually approved by
Gil, Gleb, Pasha, Brad, and Galen. Functionally [probably somewhat
lightly] tested by Galen. We may still have to shake out some bugs
during the next few months, but it seems to be working for all the
cases that I can throw at it.
Here's a summary of the changes from that branch:
* Move MCA parameter registration to a new file (btl_openib_mca.c):
* Properly check the retun status of registering MCA params
* Check for valid values of MCA parameters
* Make help strings better
* Otherwise, the only default value of an MCA param that was
changed was max_btls; it went from 4 to -1 (meaning: use all
available)
* Properly prototyped internal functions in _component.c
* Made a bunch of functions static that didn't need to be public
* Renamed to remove "mca_" prefix from static functions
* Call new MCA param registration function
* Call new INI file read/lookup/finalize functions
* Updated a bunch of macros to be "BTL_" instead of "ORTE_"
* Be a little more consistent with return values
* Handle -1 for the max_btls MCA param
* Fixed a free() that should have been an OBJ_RELEASE()
* Some re-indenting
* Added INI-file parsing
* New flex file: btl_openib_ini.l
* New default HCA params .ini file (probably to be expanded over
time by other HCA vendors)
* Added more show_help messages for parsing problems
* Read in INI files and cache the values for later lookup
* When component opens an HCA, lookup to see if any corresponding
values were found in the INI files (ID'ed by the HCA vendor_id
and vendor_part_id)
* Added btl_openib_verbose MCA param that shows what the INI-file
stuff does (e.g., shows which MTU your HCA ends up using)
* Added btl_openib_hca_param_files as a colon-delimited list of INI
files to check for values during startup (in order,
left-to-right, just like the MCA base directory param).
* MTU is currently the only value supported in this framework.
* It is not a fatal error if we don't find params for the HCA in
the INI file(s). Instead, just print a warning. New MCA param
btl_openib_warn_no_hca_params_found can be used to disable
printing the warning.
* Add MTU to peer negotiation when making a connection
* Exchange maximum MTU; select the lesser of the two
This commit was SVN r11182.
2006-08-14 19:30:37 +00:00
|
|
|
|
|
|
|
|
############################################################################
|
|
|
|
|
|
|
|
|
|
[Mellanox Tavor Infinihost]
|
2009-03-25 19:13:55 +00:00
|
|
|
vendor_id = 0x2c9,0x5ad,0x66a,0x8f1,0x1708,0x03ba
|
2006-10-16 14:46:39 +00:00
|
|
|
vendor_part_id = 23108
|
2006-12-14 15:52:13 +00:00
|
|
|
use_eager_rdma = 1
|
Bring over all the work from the /tmp/ib-hw-detect branch. In
addition to my design and testing, it was conceptually approved by
Gil, Gleb, Pasha, Brad, and Galen. Functionally [probably somewhat
lightly] tested by Galen. We may still have to shake out some bugs
during the next few months, but it seems to be working for all the
cases that I can throw at it.
Here's a summary of the changes from that branch:
* Move MCA parameter registration to a new file (btl_openib_mca.c):
* Properly check the retun status of registering MCA params
* Check for valid values of MCA parameters
* Make help strings better
* Otherwise, the only default value of an MCA param that was
changed was max_btls; it went from 4 to -1 (meaning: use all
available)
* Properly prototyped internal functions in _component.c
* Made a bunch of functions static that didn't need to be public
* Renamed to remove "mca_" prefix from static functions
* Call new MCA param registration function
* Call new INI file read/lookup/finalize functions
* Updated a bunch of macros to be "BTL_" instead of "ORTE_"
* Be a little more consistent with return values
* Handle -1 for the max_btls MCA param
* Fixed a free() that should have been an OBJ_RELEASE()
* Some re-indenting
* Added INI-file parsing
* New flex file: btl_openib_ini.l
* New default HCA params .ini file (probably to be expanded over
time by other HCA vendors)
* Added more show_help messages for parsing problems
* Read in INI files and cache the values for later lookup
* When component opens an HCA, lookup to see if any corresponding
values were found in the INI files (ID'ed by the HCA vendor_id
and vendor_part_id)
* Added btl_openib_verbose MCA param that shows what the INI-file
stuff does (e.g., shows which MTU your HCA ends up using)
* Added btl_openib_hca_param_files as a colon-delimited list of INI
files to check for values during startup (in order,
left-to-right, just like the MCA base directory param).
* MTU is currently the only value supported in this framework.
* It is not a fatal error if we don't find params for the HCA in
the INI file(s). Instead, just print a warning. New MCA param
btl_openib_warn_no_hca_params_found can be used to disable
printing the warning.
* Add MTU to peer negotiation when making a connection
* Exchange maximum MTU; select the lesser of the two
This commit was SVN r11182.
2006-08-14 19:30:37 +00:00
|
|
|
mtu = 1024
|
2008-06-30 07:47:09 +00:00
|
|
|
max_inline_data = 128
|
Bring over all the work from the /tmp/ib-hw-detect branch. In
addition to my design and testing, it was conceptually approved by
Gil, Gleb, Pasha, Brad, and Galen. Functionally [probably somewhat
lightly] tested by Galen. We may still have to shake out some bugs
during the next few months, but it seems to be working for all the
cases that I can throw at it.
Here's a summary of the changes from that branch:
* Move MCA parameter registration to a new file (btl_openib_mca.c):
* Properly check the retun status of registering MCA params
* Check for valid values of MCA parameters
* Make help strings better
* Otherwise, the only default value of an MCA param that was
changed was max_btls; it went from 4 to -1 (meaning: use all
available)
* Properly prototyped internal functions in _component.c
* Made a bunch of functions static that didn't need to be public
* Renamed to remove "mca_" prefix from static functions
* Call new MCA param registration function
* Call new INI file read/lookup/finalize functions
* Updated a bunch of macros to be "BTL_" instead of "ORTE_"
* Be a little more consistent with return values
* Handle -1 for the max_btls MCA param
* Fixed a free() that should have been an OBJ_RELEASE()
* Some re-indenting
* Added INI-file parsing
* New flex file: btl_openib_ini.l
* New default HCA params .ini file (probably to be expanded over
time by other HCA vendors)
* Added more show_help messages for parsing problems
* Read in INI files and cache the values for later lookup
* When component opens an HCA, lookup to see if any corresponding
values were found in the INI files (ID'ed by the HCA vendor_id
and vendor_part_id)
* Added btl_openib_verbose MCA param that shows what the INI-file
stuff does (e.g., shows which MTU your HCA ends up using)
* Added btl_openib_hca_param_files as a colon-delimited list of INI
files to check for values during startup (in order,
left-to-right, just like the MCA base directory param).
* MTU is currently the only value supported in this framework.
* It is not a fatal error if we don't find params for the HCA in
the INI file(s). Instead, just print a warning. New MCA param
btl_openib_warn_no_hca_params_found can be used to disable
printing the warning.
* Add MTU to peer negotiation when making a connection
* Exchange maximum MTU; select the lesser of the two
This commit was SVN r11182.
2006-08-14 19:30:37 +00:00
|
|
|
|
|
|
|
|
############################################################################
|
|
|
|
|
|
|
|
|
|
[Mellanox Arbel InfiniHost III MemFree/Tavor]
|
2008-07-29 19:31:41 +00:00
|
|
|
vendor_id = 0x2c9,0x5ad,0x66a,0x8f1,0x1708,0x03ba
|
Bring over all the work from the /tmp/ib-hw-detect branch. In
addition to my design and testing, it was conceptually approved by
Gil, Gleb, Pasha, Brad, and Galen. Functionally [probably somewhat
lightly] tested by Galen. We may still have to shake out some bugs
during the next few months, but it seems to be working for all the
cases that I can throw at it.
Here's a summary of the changes from that branch:
* Move MCA parameter registration to a new file (btl_openib_mca.c):
* Properly check the retun status of registering MCA params
* Check for valid values of MCA parameters
* Make help strings better
* Otherwise, the only default value of an MCA param that was
changed was max_btls; it went from 4 to -1 (meaning: use all
available)
* Properly prototyped internal functions in _component.c
* Made a bunch of functions static that didn't need to be public
* Renamed to remove "mca_" prefix from static functions
* Call new MCA param registration function
* Call new INI file read/lookup/finalize functions
* Updated a bunch of macros to be "BTL_" instead of "ORTE_"
* Be a little more consistent with return values
* Handle -1 for the max_btls MCA param
* Fixed a free() that should have been an OBJ_RELEASE()
* Some re-indenting
* Added INI-file parsing
* New flex file: btl_openib_ini.l
* New default HCA params .ini file (probably to be expanded over
time by other HCA vendors)
* Added more show_help messages for parsing problems
* Read in INI files and cache the values for later lookup
* When component opens an HCA, lookup to see if any corresponding
values were found in the INI files (ID'ed by the HCA vendor_id
and vendor_part_id)
* Added btl_openib_verbose MCA param that shows what the INI-file
stuff does (e.g., shows which MTU your HCA ends up using)
* Added btl_openib_hca_param_files as a colon-delimited list of INI
files to check for values during startup (in order,
left-to-right, just like the MCA base directory param).
* MTU is currently the only value supported in this framework.
* It is not a fatal error if we don't find params for the HCA in
the INI file(s). Instead, just print a warning. New MCA param
btl_openib_warn_no_hca_params_found can be used to disable
printing the warning.
* Add MTU to peer negotiation when making a connection
* Exchange maximum MTU; select the lesser of the two
This commit was SVN r11182.
2006-08-14 19:30:37 +00:00
|
|
|
vendor_part_id = 25208,25218
|
2006-12-14 15:52:13 +00:00
|
|
|
use_eager_rdma = 1
|
Bring over all the work from the /tmp/ib-hw-detect branch. In
addition to my design and testing, it was conceptually approved by
Gil, Gleb, Pasha, Brad, and Galen. Functionally [probably somewhat
lightly] tested by Galen. We may still have to shake out some bugs
during the next few months, but it seems to be working for all the
cases that I can throw at it.
Here's a summary of the changes from that branch:
* Move MCA parameter registration to a new file (btl_openib_mca.c):
* Properly check the retun status of registering MCA params
* Check for valid values of MCA parameters
* Make help strings better
* Otherwise, the only default value of an MCA param that was
changed was max_btls; it went from 4 to -1 (meaning: use all
available)
* Properly prototyped internal functions in _component.c
* Made a bunch of functions static that didn't need to be public
* Renamed to remove "mca_" prefix from static functions
* Call new MCA param registration function
* Call new INI file read/lookup/finalize functions
* Updated a bunch of macros to be "BTL_" instead of "ORTE_"
* Be a little more consistent with return values
* Handle -1 for the max_btls MCA param
* Fixed a free() that should have been an OBJ_RELEASE()
* Some re-indenting
* Added INI-file parsing
* New flex file: btl_openib_ini.l
* New default HCA params .ini file (probably to be expanded over
time by other HCA vendors)
* Added more show_help messages for parsing problems
* Read in INI files and cache the values for later lookup
* When component opens an HCA, lookup to see if any corresponding
values were found in the INI files (ID'ed by the HCA vendor_id
and vendor_part_id)
* Added btl_openib_verbose MCA param that shows what the INI-file
stuff does (e.g., shows which MTU your HCA ends up using)
* Added btl_openib_hca_param_files as a colon-delimited list of INI
files to check for values during startup (in order,
left-to-right, just like the MCA base directory param).
* MTU is currently the only value supported in this framework.
* It is not a fatal error if we don't find params for the HCA in
the INI file(s). Instead, just print a warning. New MCA param
btl_openib_warn_no_hca_params_found can be used to disable
printing the warning.
* Add MTU to peer negotiation when making a connection
* Exchange maximum MTU; select the lesser of the two
This commit was SVN r11182.
2006-08-14 19:30:37 +00:00
|
|
|
mtu = 1024
|
2008-06-30 07:47:09 +00:00
|
|
|
max_inline_data = 128
|
Bring over all the work from the /tmp/ib-hw-detect branch. In
addition to my design and testing, it was conceptually approved by
Gil, Gleb, Pasha, Brad, and Galen. Functionally [probably somewhat
lightly] tested by Galen. We may still have to shake out some bugs
during the next few months, but it seems to be working for all the
cases that I can throw at it.
Here's a summary of the changes from that branch:
* Move MCA parameter registration to a new file (btl_openib_mca.c):
* Properly check the retun status of registering MCA params
* Check for valid values of MCA parameters
* Make help strings better
* Otherwise, the only default value of an MCA param that was
changed was max_btls; it went from 4 to -1 (meaning: use all
available)
* Properly prototyped internal functions in _component.c
* Made a bunch of functions static that didn't need to be public
* Renamed to remove "mca_" prefix from static functions
* Call new MCA param registration function
* Call new INI file read/lookup/finalize functions
* Updated a bunch of macros to be "BTL_" instead of "ORTE_"
* Be a little more consistent with return values
* Handle -1 for the max_btls MCA param
* Fixed a free() that should have been an OBJ_RELEASE()
* Some re-indenting
* Added INI-file parsing
* New flex file: btl_openib_ini.l
* New default HCA params .ini file (probably to be expanded over
time by other HCA vendors)
* Added more show_help messages for parsing problems
* Read in INI files and cache the values for later lookup
* When component opens an HCA, lookup to see if any corresponding
values were found in the INI files (ID'ed by the HCA vendor_id
and vendor_part_id)
* Added btl_openib_verbose MCA param that shows what the INI-file
stuff does (e.g., shows which MTU your HCA ends up using)
* Added btl_openib_hca_param_files as a colon-delimited list of INI
files to check for values during startup (in order,
left-to-right, just like the MCA base directory param).
* MTU is currently the only value supported in this framework.
* It is not a fatal error if we don't find params for the HCA in
the INI file(s). Instead, just print a warning. New MCA param
btl_openib_warn_no_hca_params_found can be used to disable
printing the warning.
* Add MTU to peer negotiation when making a connection
* Exchange maximum MTU; select the lesser of the two
This commit was SVN r11182.
2006-08-14 19:30:37 +00:00
|
|
|
|
|
|
|
|
############################################################################
|
|
|
|
|
|
|
|
|
|
[Mellanox Sinai Infinihost III]
|
2008-07-29 19:31:41 +00:00
|
|
|
vendor_id = 0x2c9,0x5ad,0x66a,0x8f1,0x1708,0x03ba
|
2010-02-15 09:45:34 +00:00
|
|
|
vendor_part_id = 25204,24204
|
2006-12-14 15:52:13 +00:00
|
|
|
use_eager_rdma = 1
|
Bring over all the work from the /tmp/ib-hw-detect branch. In
addition to my design and testing, it was conceptually approved by
Gil, Gleb, Pasha, Brad, and Galen. Functionally [probably somewhat
lightly] tested by Galen. We may still have to shake out some bugs
during the next few months, but it seems to be working for all the
cases that I can throw at it.
Here's a summary of the changes from that branch:
* Move MCA parameter registration to a new file (btl_openib_mca.c):
* Properly check the retun status of registering MCA params
* Check for valid values of MCA parameters
* Make help strings better
* Otherwise, the only default value of an MCA param that was
changed was max_btls; it went from 4 to -1 (meaning: use all
available)
* Properly prototyped internal functions in _component.c
* Made a bunch of functions static that didn't need to be public
* Renamed to remove "mca_" prefix from static functions
* Call new MCA param registration function
* Call new INI file read/lookup/finalize functions
* Updated a bunch of macros to be "BTL_" instead of "ORTE_"
* Be a little more consistent with return values
* Handle -1 for the max_btls MCA param
* Fixed a free() that should have been an OBJ_RELEASE()
* Some re-indenting
* Added INI-file parsing
* New flex file: btl_openib_ini.l
* New default HCA params .ini file (probably to be expanded over
time by other HCA vendors)
* Added more show_help messages for parsing problems
* Read in INI files and cache the values for later lookup
* When component opens an HCA, lookup to see if any corresponding
values were found in the INI files (ID'ed by the HCA vendor_id
and vendor_part_id)
* Added btl_openib_verbose MCA param that shows what the INI-file
stuff does (e.g., shows which MTU your HCA ends up using)
* Added btl_openib_hca_param_files as a colon-delimited list of INI
files to check for values during startup (in order,
left-to-right, just like the MCA base directory param).
* MTU is currently the only value supported in this framework.
* It is not a fatal error if we don't find params for the HCA in
the INI file(s). Instead, just print a warning. New MCA param
btl_openib_warn_no_hca_params_found can be used to disable
printing the warning.
* Add MTU to peer negotiation when making a connection
* Exchange maximum MTU; select the lesser of the two
This commit was SVN r11182.
2006-08-14 19:30:37 +00:00
|
|
|
mtu = 2048
|
2008-06-30 07:47:09 +00:00
|
|
|
max_inline_data = 128
|
2006-12-12 14:12:39 +00:00
|
|
|
|
|
|
|
|
############################################################################
|
|
|
|
|
|
2007-05-10 12:27:51 +00:00
|
|
|
# A.k.a. ConnectX
|
|
|
|
|
[Mellanox Hermon]
|
2010-09-17 23:04:06 +00:00
|
|
|
vendor_id = 0x2c9,0x5ad,0x66a,0x8f1,0x1708,0x03ba,0x15b3
|
2010-02-15 09:45:34 +00:00
|
|
|
vendor_part_id = 25408,25418,25428,26418,26428,25448,26438,26448,26468,26478,26488
|
2007-05-10 12:27:51 +00:00
|
|
|
use_eager_rdma = 1
|
|
|
|
|
mtu = 2048
|
2008-06-30 07:47:09 +00:00
|
|
|
max_inline_data = 128
|
2007-05-10 12:27:51 +00:00
|
|
|
|
|
|
|
|
############################################################################
|
|
|
|
|
|
2008-06-23 23:12:55 +00:00
|
|
|
[IBM eHCA 4x and 12x]
|
2006-12-12 14:12:39 +00:00
|
|
|
vendor_id = 0x5076
|
2009-06-27 07:39:30 +00:00
|
|
|
vendor_part_id = 0
|
2006-12-14 15:52:13 +00:00
|
|
|
use_eager_rdma = 1
|
2006-12-12 14:12:39 +00:00
|
|
|
mtu = 2048
|
2008-05-29 13:55:39 +00:00
|
|
|
receive_queues = P,128,256,192,128:P,65536,256,192,128
|
2008-11-14 12:15:35 +00:00
|
|
|
max_inline_data = 0
|
2007-01-19 19:46:29 +00:00
|
|
|
|
|
|
|
|
############################################################################
|
|
|
|
|
|
2009-06-27 07:39:30 +00:00
|
|
|
[IBM eHCA-2 4x and 12x]
|
|
|
|
|
vendor_id = 0x5076
|
|
|
|
|
vendor_part_id = 1
|
|
|
|
|
use_eager_rdma = 1
|
|
|
|
|
mtu = 4096
|
|
|
|
|
receive_queues = P,128,256,192,128:P,65536,256,192,128
|
|
|
|
|
max_inline_data = 0
|
|
|
|
|
|
|
|
|
|
############################################################################
|
|
|
|
|
|
2008-06-23 23:12:55 +00:00
|
|
|
# See http://lists.openfabrics.org/pipermail/general/2008-June/051920.html
|
|
|
|
|
# 0x1fc1 and 0x1077 are PCI ID's; at least one of QL's OUIs is 0x1175
|
|
|
|
|
|
|
|
|
|
[QLogic InfiniPath 1]
|
2008-08-13 18:35:37 +00:00
|
|
|
vendor_id = 0x1fc1,0x1077,0x1175
|
2008-03-04 22:14:27 +00:00
|
|
|
vendor_part_id = 13
|
2007-01-19 19:46:29 +00:00
|
|
|
use_eager_rdma = 1
|
|
|
|
|
mtu = 2048
|
2009-07-24 20:09:39 +00:00
|
|
|
max_inline_data = 0
|
2008-01-09 22:14:18 +00:00
|
|
|
|
2008-06-23 23:12:55 +00:00
|
|
|
[QLogic InfiniPath 2]
|
2008-08-13 18:35:37 +00:00
|
|
|
vendor_id = 0x1fc1,0x1077,0x1175
|
2008-03-04 22:14:27 +00:00
|
|
|
vendor_part_id = 16,29216
|
|
|
|
|
use_eager_rdma = 1
|
|
|
|
|
mtu = 4096
|
2009-07-24 20:09:39 +00:00
|
|
|
max_inline_data = 0
|
2008-03-04 22:14:27 +00:00
|
|
|
|
2009-06-10 23:37:38 +00:00
|
|
|
[QLogic InfiniPath 3]
|
|
|
|
|
vendor_id = 0x1fc1,0x1077,0x1175
|
|
|
|
|
vendor_part_id = 16,29474
|
|
|
|
|
use_eager_rdma = 1
|
|
|
|
|
mtu = 4096
|
2009-07-24 20:09:39 +00:00
|
|
|
max_inline_data = 0
|
2009-06-10 23:37:38 +00:00
|
|
|
|
2008-01-09 22:14:18 +00:00
|
|
|
############################################################################
|
|
|
|
|
|
2008-06-23 23:12:55 +00:00
|
|
|
# Chelsio's OUI is 0x0743. 0x1425 is the PCI ID.
|
|
|
|
|
|
2008-01-09 22:14:18 +00:00
|
|
|
[Chelsio T3]
|
|
|
|
|
vendor_id = 0x1425
|
2009-08-07 14:14:08 +00:00
|
|
|
vendor_part_id = 0x0020,0x0021,0x0022,0x0023,0x0024,0x0025,0x0026,0x0030,0x0031,0x0032,0x0035,0x0036
|
2008-01-09 22:14:18 +00:00
|
|
|
use_eager_rdma = 1
|
|
|
|
|
mtu = 2048
|
2008-05-20 21:53:42 +00:00
|
|
|
receive_queues = P,65536,256,192,128
|
2008-06-30 14:25:32 +00:00
|
|
|
max_inline_data = 64
|
2008-06-04 12:11:45 +00:00
|
|
|
|
2010-02-24 20:39:40 +00:00
|
|
|
[Chelsio T4]
|
|
|
|
|
vendor_id = 0x1425
|
|
|
|
|
vendor_part_id = 0xa000
|
|
|
|
|
use_eager_rdma = 1
|
|
|
|
|
mtu = 2048
|
|
|
|
|
receive_queues = P,65536,256,192,128
|
|
|
|
|
max_inline_data = 64
|
|
|
|
|
|
2008-06-04 12:11:45 +00:00
|
|
|
############################################################################
|
|
|
|
|
|
2008-06-23 23:12:55 +00:00
|
|
|
# I'm *assuming* that 0x4040 is the PCI ID...
|
|
|
|
|
|
2008-06-04 12:11:45 +00:00
|
|
|
[NetXen]
|
|
|
|
|
vendor_id = 0x4040
|
|
|
|
|
vendor_part_id = 0x0001,0x0002,0x0003,0x0004,0x0005,0x0024,0x0025,0x0100
|
|
|
|
|
use_eager_rdma = 1
|
|
|
|
|
mtu = 2048
|
2008-06-20 01:00:22 +00:00
|
|
|
receive_queues = P,65536,248,192,128
|
2008-06-30 14:25:32 +00:00
|
|
|
max_inline_data = 64
|
2008-06-05 20:24:24 +00:00
|
|
|
|
|
|
|
|
############################################################################
|
|
|
|
|
|
2010-02-26 19:54:16 +00:00
|
|
|
# NetEffect's OUI is 0x1255. 0x1678 is the PCI ID. ...but then
|
|
|
|
|
# NetEffect was bought by Intel. Intel's OUI is 0x1b21.
|
2008-06-23 23:12:55 +00:00
|
|
|
|
2010-02-26 19:54:16 +00:00
|
|
|
[NetEffect/Intel NE020]
|
|
|
|
|
vendor_id = 0x1678,0x1255,0x1b21
|
2010-02-24 20:39:40 +00:00
|
|
|
vendor_part_id = 0x0100,0x0110
|
2008-06-05 20:24:24 +00:00
|
|
|
use_eager_rdma = 1
|
|
|
|
|
mtu = 2048
|
|
|
|
|
receive_queues = P,128,256,192,128:P,65536,256,192,128
|
2008-06-30 14:25:32 +00:00
|
|
|
max_inline_data = 64
|
2009-02-06 00:51:04 +00:00
|
|
|
rdmacm_reject_causes_connect_error = 1
|